CISCO-ISDNU-IF-MIB
- Registered at
- 1.3.6.1.4.1.9.9.18
- Last updated
- 1996-03-18 00:00
- Organization
- Cisco Systems, Inc.
- Namespace
- cisco
- Source file
CISCO-ISDNU-IF-MIB- Digest
sha256:ca5a80cc930de3f331eb07c3a719ddf4edc0ea04bb7946236707ed43c4963abf
Description
ISDN BRI integrated U Interface MIB module. This MIB manages the ISDN BRI integrated U Interface in the router.
Contact
Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-isdn@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-ISDNU-IF-MIB CISCO-SMI IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciuIfObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.18.1 | |||
| ciuInterface OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.18.1.1 | |||
| ciuIfStaticConfigTable OBJECT-TYPE The ISDN BRI integrated U interface Static Configuration Table. It contains items that are statically configured by reading configuration from hardware and can not be changed by end user without physically changing the U Interface. | 1.3.6.1.4.1.9.9.18.1.1.1 | not-accessible | current | |
| ciuIfStaticConfigEntry OBJECT-TYPE An entry in the static configuration table for each ISDN BRI integrated U interface. | 1.3.6.1.4.1.9.9.18.1.1.1.1 | not-accessible | current | |
| ciuIfType OBJECT-TYPE Specifies the type of ISDN BRI integrated U interface. other - none of the following. addOnU - An add-On card with ISDN BRI integrated U interface. onBoardU - An on board ISDN BRI integrated U interface onBoardIntegUandSTPort - An on board BRI integrated U interface with external S/T ports. addOnIntegUandSTPort - An add-on card with ISDN BRI integrated U interface and S/T port. | 1.3.6.1.4.1.9.9.18.1.1.1.1.1 | INTEGER {other(1), addOnU(2), onBoardU(3), onBoardIntegUandSTPort(4), addOnIntegUandSTPort(5)} | read-only | current |
| ciuIfStatusTable OBJECT-TYPE The ISDN BRI integrated U interface Status Table. Contains information about the status of the ISDN U interface, including the error statistics and current active EOC (Embedded operations channel) commands from CO (Central office). | 1.3.6.1.4.1.9.9.18.1.1.2 | not-accessible | current | |
| ciuIfStatusEntry OBJECT-TYPE An entry in the status table for each ISDN BRI integrated U interface. | 1.3.6.1.4.1.9.9.18.1.1.2.1 | not-accessible | current | |
| ciuIfStatus OBJECT-TYPE This object contains the operation status of the ISDN BRI integrated U interface. activated - The ISDN U interface is activated. The interface is active and data can be transmitted and received through the interface. activationPending - The ISDN U interface is in activation pending state. Either the CO or the router has initiated activation of U interface, but activation has not yet completed. Data cannot be transmitted or received. deactivated - The ISDN U interface is deactivated. The ISDN line to the CO is deactivated. Data cannot be transmitted or received on the ISDN U interface. | 1.3.6.1.4.1.9.9.18.1.1.2.1.1 | INTEGER {activated(1), activationPending(2), deactivated(3)} | read-only | current |
| ciuIfEocCommand OBJECT-TYPE The last EOC command sent by Central Office; the ECO command supports operations communications needs between the network and ISDN U interface. | 1.3.6.1.4.1.9.9.18.1.1.2.1.2 | DisplayString (SIZE(1..48)) | read-only | current |
| ciuIfOverHeadBits OBJECT-TYPE This object describes 5 attributes of Overhead bits. The Overhead bits contains the ISDN U interface transceiver operations and maintenance functions that are handled by M4, M5 and M6 bits in the superframe. These bits are described as follows: act - start-up bit; this bit is set to binary ONE by the network as a part of the start-up sequence to communicate readiness for layer-2 communication. dea - turn-off bit; this bit is set to binary ZERO by the network to communicate to the NT its intention to turn off. febe - Far End Block Error bit; this bit is set to binary ONE if there are no error in the superframe and binary ZERO if the superframe contains an error. uoa - U interface only activation bit; This bit is set to binary ONE if the S/T interface should be activated. Otherwise, this bit should be set to binary ZERO. aib - Alarm indication bit; this bit is set to binary ONE if the transmission path for D, B1, and B2 channels has been established all the way to the local exchange. Otherwise, this bit is set to binary ZERO. | 1.3.6.1.4.1.9.9.18.1.1.2.1.3 | OCTET STRING (SIZE(8)) | read-only | current |
| ciuIfFebeErrors OBJECT-TYPE Number of Far End Block Errors (FEBE) detected since last boot. Whenever the CO (Central Office) receives a block of data from the router with a CRC error, the FEBE count is incremented by one. | 1.3.6.1.4.1.9.9.18.1.1.2.1.4 | Counter32 | read-only | current |
| ciuIfNebeErrors OBJECT-TYPE Number of Near End Block Errors (NEBE) detected since last boot. Whenever the U transceiver receives a block of data with a CRC error, the NEBE count is incremented by one. | 1.3.6.1.4.1.9.9.18.1.1.2.1.5 | Counter32 | read-only | current |
| ciuIfLoopStatus OBJECT-TYPE Current ISDN BRI integrated U interface Loop status and NT maintenance mode. The definition of maintenance modes are as follows: none - The U interface is not in either Loopback or maintenance mode. type2Loopback - Type 2 (CO to U interface) Loopback mode; this mode is set to perform the loopback between CO and the ISDN BRI integrated U interface. type3Loopback - Type 3 (processor to U interface) Loopback mode; this mode is set by router to perform the loopback between the router processor and the ISDN BRI integrated U interface. ntQuietMode - NT quiet mode; this mode is set by CO for metallic loop tests. In the NT quiet mode, the ISDN U interface will not attempt a start-up or will not initiate transmission during metallic loop tests conducted by the network. ilmtMode - Insertion loss measurement test (ILMT); this mode is set by CO for the Insertion loss measurement test. The insertion loss measurement test will cause a known test signal to be generated by the NT. This test will be used in network measurements of DSL (Digital Subscriber Line) transmission characteristics. | 1.3.6.1.4.1.9.9.18.1.1.2.1.6 | INTEGER {none(1), type2Loopback(2), type3Loopback(3), ntQuietMode(4), ilmtMode(5)} | read-only | current |
| ciuIfExternalSTPort OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.18.1.2 | |||
| ciuIfExternalSTPortStatusTable OBJECT-TYPE The external S/T port status table. It contains the operation status of the external ISDN S/T ports. | 1.3.6.1.4.1.9.9.18.1.2.1 | not-accessible | current | |
| ciuIfExternalSTPortStatusEntry OBJECT-TYPE An entry in the status table for each external ISDN S/T port. | 1.3.6.1.4.1.9.9.18.1.2.1.1 | not-accessible | current | |
| ciuIfExternalSTPortNumber OBJECT-TYPE The external ISDN S/T port number. | 1.3.6.1.4.1.9.9.18.1.2.1.1.1 | INTEGER (1..8) | not-accessible | current |
| ciuIfExternalSTPortStatus OBJECT-TYPE This object contains the operation status of the external ISDN S/T port. activated - The external ISDN S/T port is activated. The port is active and data can be transmitted and received on the port. activationPending - The external ISDN S/T port is in activation pending state. Either the CO or the router has initiated activation of the port, but activation has not yet completed. Data cannot be transmitted or received. deactivated - The external ISDN S/T port is deactivated. Either no ISDN device is attached to the external S/T port or the ISDN line to the CO is deactivated. Data cannot be transmitted or received on the S/T port. | 1.3.6.1.4.1.9.9.18.1.2.1.1.2 | INTEGER {activated(1), activationPending(2), deactivated(3)} | read-only | current |
| ciuIfMIBNotificationEnables OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.18.1.3 | |||
| ciuIfEnableULoopStatusNotification OBJECT-TYPE Indicates whether or not an ISDN BRI integrated U interface Loop status notification (ciuIfLoopStatusNotification) will be generated by this router. | 1.3.6.1.4.1.9.9.18.1.3.1 | TruthValue | read-write | current |
| ciuIfMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.18.2 | |||
| ciuIfMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.18.2.0 | |||
| ciuIfMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.18.3 | |||
| ciuIfMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.18.3.1 | |||
| ciuIfMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.18.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| ciuIfLoopStatusNotification NOTIFICATION-TYPE A ciuIfLoopStatusNotification is sent when there is a change in ciscoIsdnuIfLoopStatus object. The status change occurs when the ISDN BRI integrated U interface enters into or exits from Loopback or Maintenance modes. | 1.3.6.1.4.1.9.9.18.2.0.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciuIfMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco ISDN BRI integrated U interface MIB | 1.3.6.1.4.1.9.9.18.3.1.1 | current |
| ciuIfMIBGroup OBJECT-GROUP The collection of objects providing information about the Cisco ISDN BRI integrated U interface. | 1.3.6.1.4.1.9.9.18.3.2.1 | current |