CISCO-IPSLA-VIDEO-PROFILE-MIB
- Registered at
- 1.3.6.1.4.1.9.9.766
- Last updated
- 2011-01-24 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2011-01-24 00:00
- Namespace
- cisco
- Source file
CISCO-IPSLA-VIDEO-PROFILE-MIB- Digest
sha256:308f93f7cd662b5c687a5d99926a3e720370278d49b34efae6f23f879033ece4
Description
IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, network assessment and health monitoring. This MIB defines the following table as the collection of IP SLA video traffic profiles that are used when generating synthetic video traffic by configured IP SLA video operations. cipslaVideoProfileTable To run an IP SLA Video Operation, the MIB user should do the following configurations: 1. Create a new or reuse the existing rttMonEchoAdminEntry with valid rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress, rttMonEchoAdminTargetPort, rttMonEchoAdminSourceAddress, rttMonEchoAdminSourcePort, rttMonEchoAdminVideoTrafficProfile, rttMonEchoAdminDscp, rttMonEchoAdminReserveDsp, rttMonEchoAdminInputInterface, and other applicable objects (if any) in rttMonEchoAdminTable of CISCO-RTTMON-MIB. 2. Schedule the operation to run immediately or at some scheduled time(s) with optional recurrence(s) if desirable, by configuring with rttMonCtrlAdminTable of CISCO-RTTMON-MIB. 3. Each occurrance of the scheduled operation generates a report for the IP SLA VO statistics which are populated and available in cipslaLatestVideoStatsTable and cipslaVideoAggStatsTable of CISCO-IPSLA-VIDEO-MIB. Glossary: IP SLA - Cisco IOS IP Service Level Agreements IP SLA operation - Refers to the 'video' operation supported by IP SLA. RTT - Round Trip Time
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-ipsla@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| CISCO-VIDEO-SESSION-MIB | CvcVideoProfile |
| CISCO-VIDEO-TC | CvcVideoResolution |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-DIAL-CONTROL-MIB CISCO-IPSLA-VIDEO-PROFILE-MIB CISCO-SMI CISCO-VIDEO-SESSION-MIB CISCO-VIDEO-TC CISCO-VOICE-COMMON-DIAL-CONTROL-MIB DIAL-CONTROL-MIB IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoIpslaVideoProfileMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.766.0 | |||
| ciscoIpslaVideoProfileMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.766.1 | |||
| cipslaVideoProfile OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.766.1.1 | |||
| cipslaVideoProfileTable OBJECT-TYPE This table lists the definitions of IP SLA video profiles that contain descriptive parameters for synthetic video traffic patterns which can be used when generating synthetic video packets by IP SLA Video Operation. | 1.3.6.1.4.1.9.9.766.1.1.1 | not-accessible | current | |
| cipslaVideoProfileEntry OBJECT-TYPE A conceptual row in the cipslaVideoProfileTable | 1.3.6.1.4.1.9.9.766.1.1.1.1 | not-accessible | current | |
| cipslaVideoProfileID OBJECT-TYPE An arbitrary index that uniquely identifies a video profile | 1.3.6.1.4.1.9.9.766.1.1.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cipslaVideoProfileRowStatus OBJECT-TYPE This object is used to create a new row or modify or delete an existing row in this table. | 1.3.6.1.4.1.9.9.766.1.1.1.1.2 | RowStatus | read-create | current |
| cipslaVideoProfileStorageType OBJECT-TYPE This object specifies the storage type for this conceptual row. The following columnar objects are allowed to be writable when the storageType of this conceptual row is permanent(4): cipslaVideoProfileDescription cipslaVideoProfileEndpointType cipslaVideoProfileCodec cipslaVideoProfileVideoContents cipslaVideoProfileFrameRate cipslaVideoProfileResolution cipslaVideoProfileAvgBitrate cipslaVideoProfileMaxBitrate cipslaVideoProfileMinBitrate cipslaVideoProfileBitrateWindowSize cipslaVideoProfileIframeMaxSize cipslaVideoProfileIframeRefreshInterval cipslaVideoProfileRtpAvgSize cipslaVideoProfileRtpJitterPattern | 1.3.6.1.4.1.9.9.766.1.1.1.1.3 | StorageType | read-create | current |
| cipslaVideoProfileName OBJECT-TYPE This object specifies the name of an IP SLA video profile. | 1.3.6.1.4.1.9.9.766.1.1.1.1.4 | SnmpAdminString | read-create | current |
| cipslaVideoProfileDescription OBJECT-TYPE This object specifies the detailed description string of this video profile. | 1.3.6.1.4.1.9.9.766.1.1.1.1.5 | SnmpAdminString | read-create | current |
| cipslaVideoProfileEndpointType OBJECT-TYPE This object specifies the sender endpoint type which determines the traffic pattern according to the encoder's characteristics while generating and sending video packets. custom - Allows flexibile endpoint behavior cts1k - Cisco Telepresence System CTS-1000 cts3k - Cisco Telepresence System CTS-3000 cp99xx - Cisco CP-9900 series video IP phones unknown - unknown endpoint type | 1.3.6.1.4.1.9.9.766.1.1.1.1.6 | INTEGER {custom(1), cts1k(21), cts3k(22), cp99xx(31), unknown(9999)} | read-create | current |
| cipslaVideoProfileCodec OBJECT-TYPE This object specifies the video codec and codec profile for how the video contents are encoded in byte streams. | 1.3.6.1.4.1.9.9.766.1.1.1.1.7 | CvcVideoProfile | read-create | current |
| cipslaVideoProfileVideoContents OBJECT-TYPE This object specifies the video contents that determine the amount of information to be encoded by the video sender and thus have effects on the peak rate and frame size in the video traffic generation. This gives a high level description of the traffic patterns, and can be overwritten by the detailed parameters such as cipslaVideoProfileIframeRefreshInterval. The supported video contents are as follows. conferenceRoom - conference room scene singlePerson - single person in video conferencing presentation - presentation video sports - sports activities video streetView - video scene from street views other - other scenes | 1.3.6.1.4.1.9.9.766.1.1.1.1.8 | INTEGER {conferenceRoom(1), singlePerson(2), presentation(3), sports(4), streetView(5), other(255)} | read-create | current |
| cipslaVideoProfileFrameRate OBJECT-TYPE This object specifies the video frame rates in the generated video traffic, in unit of 'frames per 1K seconds' or fpks. For example, 30000 means 30 frames per second (fps), and 7500 means 7.5 fps. The maximum frame rate is 120 fps or 120000 fpks. | 1.3.6.1.4.1.9.9.766.1.1.1.1.9 | Unsigned32 (1..120000) | read-create | current |
| cipslaVideoProfileResolution OBJECT-TYPE This object specifies the video frame resolution of the generated video traffic. | 1.3.6.1.4.1.9.9.766.1.1.1.1.10 | CvcVideoResolution | read-create | current |
| cipslaVideoProfileAvgBitrate OBJECT-TYPE This object specifies the average bit rate of a video traffic pattern in kilo-bits per second. It is used by the sender's encoder to upper-limit the generated video packets. | 1.3.6.1.4.1.9.9.766.1.1.1.1.11 | Unsigned32 (1..24000) | read-create | current |
| cipslaVideoProfileMaxBitrate OBJECT-TYPE This object specifies the maximum bit rate or peak rate of the video traffic that can be generated by the sender's encoder, in kilo-bits per second. This value is valid only in the range from the average bit rate to 10 times the average bit rate, where the average bit rate is specified in cipslaVideoProfileAvgBitrate object. | 1.3.6.1.4.1.9.9.766.1.1.1.1.12 | Unsigned32 (1..240000) | read-create | current |
| cipslaVideoProfileMinBitrate OBJECT-TYPE This object specifies the minimum bit rate in kilo-bits per second, at which the video traffic can be generated even when the video contents are still. This value is valid only in the range from 1 to the average bit rate as specified in cipslaVideoProfileAvgBitrate object. | 1.3.6.1.4.1.9.9.766.1.1.1.1.13 | Unsigned32 (1..24000) | read-create | current |
| cipslaVideoProfileBitrateWindowSize OBJECT-TYPE This object specifies the rate control window size which is used by the video encoder to calculate the running average bit rate. The smaller the value of this bit rate window size, less bursty of the traffic; this bitrate control window size is specified in milliseconds. Value 0 indicates no bitrate window control. | 1.3.6.1.4.1.9.9.766.1.1.1.1.14 | Unsigned32 (0..10000) | read-create | current |
| cipslaVideoProfileIframeMaxSize OBJECT-TYPE This object specifies the maximum size of an I-frame that the video encoder can generate, in kilo-bytes. | 1.3.6.1.4.1.9.9.766.1.1.1.1.15 | Unsigned32 (1..1000) | read-create | current |
| cipslaVideoProfileIframeRefreshInterval OBJECT-TYPE This object specifies the refresh-rate of video intra-frames, in seconds. Value 0 indicates that only the first frame is an intra-frame, i.e no refresh. | 1.3.6.1.4.1.9.9.766.1.1.1.1.16 | Unsigned32 (0..100000) | read-create | current |
| cipslaVideoProfileRtpAvgSize OBJECT-TYPE This object specifies the average RTP packet size in generated video traffic, in bytes. | 1.3.6.1.4.1.9.9.766.1.1.1.1.17 | Unsigned32 (500..1600) | read-create | current |
| cipslaVideoProfileRtpJitterPattern OBJECT-TYPE This object specifies the output buffering control mechanism of the video encoder when generating packets. bursty - send packets all out at once, no buffering shaped - send packets evenly in a frame interval, with buffering other - other patterns | 1.3.6.1.4.1.9.9.766.1.1.1.1.18 | INTEGER {bursty(1), shaped(2), other(99)} | read-create | current |
| ciscoIpslaVideoProfileMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.766.2 | |||
| ciscoIpslaVideoProfileMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.766.2.1 | |||
| ciscoIpslaVideoProfileMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.766.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoIpslaVideoProfileMIBCompliance MODULE-COMPLIANCE This is the module-compliance for ISR G2 with PVDM3 platforms, containing object groups and notification groups. | 1.3.6.1.4.1.9.9.766.2.1.1 | current |
| ciscoIpslaVideoProfileBaseGroup OBJECT-GROUP The is the base group to include those objects for all platforms implementations. | 1.3.6.1.4.1.9.9.766.2.2.1 | current |
| ciscoIpslaVideoProfileIsrg2Pvdm3Group OBJECT-GROUP This is the object group to include those objects that are only applicable to Cisco ISR G2 platforms with PVDM3. | 1.3.6.1.4.1.9.9.766.2.2.2 | current |