MIBs Depot

CISCO-INTERFACE-XCVR-MONITOR-MIB

Registered at
1.3.6.1.4.1.9.9.706
Last updated
2009-10-09 00:00
Organization
Cisco Systems, Inc.
Revisions
2009-10-09 00:00
Namespace
cisco
Source file
CISCO-INTERFACE-XCVR-MONITOR-MIB
Digest
sha256:262e0d7889969c65a910d116b6436b482bb952315d4db3e9b61e25d3ec149ed2

Description

A MIB module that provides monitoring information about the transceivers plugged into interface on a system.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: sanos-pm@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
IF-MIBifName
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-INTERFACE-XCVR-MONITOR-MIB
CISCO-SMI
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CiscoInterfaceXcvrMonitorStatus
TEXTUAL-CONVENTION
This textual convention defines the status of the monitoring parameter for a given sensor type in transceiver digital diagnostics on an interface. The value of the monitoring parameter for a given sensor lies are bounded within maximum (high) and minimum (low) limits. If the current value is over the high limit, this status is set to 'highSet'. Upon the value of the sensor coming back into the normal range (between high and low values), this status is set to 'highClear'. Similarly, if the current value is below the low limit, this status is set to 'lowSet'. Upon the value the sensor coming back into normal range subsequently, this status is set to 'lowClear'. If the current value is stays within the high and low limits, this status is set to 'normal'. Also, subsequently after the status had been either 'highClear' or 'lowClear', if the value is within the high and low limits, this status is set to 'normal'.
current

Objects

NameOIDSyntaxAccessStatus
ciscoInterfaceXcvrMonMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.706.0
ciscoInterfaceXcvrMonMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.706.1
cIfXcvrMonDigitalDiagTempAlarm
OBJECT-TYPE
The current status of temperature alarm flag on the temperature sensor of the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.1CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonDigitalDiagTempWarning
OBJECT-TYPE
The current status of temperature warning flag on the temperature sensor of the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.2CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonDigitalDiagVoltAlarm
OBJECT-TYPE
The current status of voltage alarm flag on the voltage sensor of the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.3CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonDigitalDiagVoltWarning
OBJECT-TYPE
The current status of voltage warning flag on the voltage sensor of the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.4CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonDigitalDiagCurrAlarm
OBJECT-TYPE
The current status of current alarm flag on the current sensor of the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.5CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonDigitalDiagCurrWarning
OBJECT-TYPE
The current status of current warning flag on the current sensor of the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.6CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonDigitalDiagRxPwrAlarm
OBJECT-TYPE
The current status of Rx power alarm flag on the Rx power sensor of the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.7CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonDigitalDiagRxPwrWarning
OBJECT-TYPE
The current status of Rx power warning flag on the Rx power sensor of the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.8CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonDigitalDiagTxPwrAlarm
OBJECT-TYPE
The current status of Tx power alarm flag on the Tx power sensor of the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.9CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonDigitalDiagTxPwrWarning
OBJECT-TYPE
The current status of Tx power warning flag on the Tx power sensor of the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.10CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonDigitalDiagTxFaultAlarm
OBJECT-TYPE
The current status of Tx fault count flag on the transceiver in the interface.
1.3.6.1.4.1.9.9.706.1.11CiscoInterfaceXcvrMonitorStatusaccessible-for-notifycurrent
cIfXcvrMonStatusChangeNotifEnable
OBJECT-TYPE
Indicates whether cIfXcvrMonStatusChangeNotif should be generated.
1.3.6.1.4.1.9.9.706.1.12INTEGER {enable(1), disable(2)}read-writecurrent
ciscoInterfaceXcvrMonMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.706.2
ciscoInterfaceXcvrMonMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.706.2.1
ciscoInterfaceXcvrMonMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.706.2.2

Notifications

NameOIDStatus
cIfXcvrMonStatusChangeNotif
NOTIFICATION-TYPE
This notification trap indicates the current status of the alarm and warning monitoring parameters for all the sensors based on the digital diagnostic monitoring information. This notification is generated whenever there is a change in the status of atleast one of the monitoring parameters of the sensors on the transceiver in an interface.
1.3.6.1.4.1.9.9.706.0.1current

Conformance

NameOIDStatus
cIfXcvrMonMIBCompliance
MODULE-COMPLIANCE
This is a default module-compliance containing default object groups.
1.3.6.1.4.1.9.9.706.2.1.1current
cIfXcvrDigitalDiagMonStatusGroup
OBJECT-GROUP
A collection of Cisco specific Digital Diagnostics monitoring status information.
1.3.6.1.4.1.9.9.706.2.2.1current
cIfXcvrMonStatusChangeNotifGroup
NOTIFICATION-GROUP
A collection of Cisco specific Digital Diagnostics monitoring notifications.
1.3.6.1.4.1.9.9.706.2.2.2current