CISCO-IF-LINK-CONFIG-MIB
- Registered at
- 1.3.6.1.4.1.9.9.175
- Last updated
- 2001-10-05 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2001-10-05 00:00, 2000-09-14 00:00
- Namespace
- cisco
- Source file
CISCO-IF-LINK-CONFIG-MIB- Digest
sha256:b8504ddc340ac8f1a4e26cc1f6f9feb24622c6725dfedf536b84c5b53eb8a03e
Description
The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interfaces). Terminology : bulk-distribution : The bulk distribution is the feature by which a line/interface on one module can replace the line for the other. bulk-distribution module : The module which links its interfaces to the target module. target module : A module that gets incoming traffic from a bulk distribution module rather than from a back card. The Module which supports bulk distribution, converts traffic from its lines (may be T3, OC-N) to lines on the target module (may be T3, T1 etc). The bulk distribution is achieved by having a point-to-point connection (bulk-distribution bus) between the bulk-distribution module and the target module. The benefit of bulk distribution is that the target module need not have the back cards. The lines/interfaces from bulk-distribution module will be used as lines for the target module. An example is given here on linking interfaces. |------------------------------------------------| | | | |------------------------------| | | | | | | | | | |-------------| | | Ta|rget Module | | | | | ------- ------- ------- --------------- | | | | | | | | | | | | | | | | | T1 | | T1 | |T1 | | Bulk | |card | |card | |card | | Distribution | | | | | | | | | | | | | | | | Module | | | | | | | | | | | | | | | | (T3 card) | | | | | | | | | ------- ------- ------- ---------------
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoLocationSpecifier |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-IF-LINK-CONFIG-MIB CISCO-SMI CISCO-TC IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cilConfigMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.175.1 | |||
| cilConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.175.1.1 | |||
| cilConfTable OBJECT-TYPE The interface link configuration table. | 1.3.6.1.4.1.9.9.175.1.1.1 | not-accessible | current | |
| cilConfEntry OBJECT-TYPE An entry in the cilConfTable. This entry is used for linking an interface identified by cilSourceInterface to an interface identified by cilTaregetModuleInterface. The entries are created and deleted using the cilRowStatus object. An interface on the bulk-distribution module cannot be linked to multiple interfaces in the target module. | 1.3.6.1.4.1.9.9.175.1.1.1.1 | not-accessible | current | |
| cilSourceInterface OBJECT-TYPE An interface of the bulk-distribution module (Source) which will be linked with the interface of the target module. It represents an entry in the ifTable. | 1.3.6.1.4.1.9.9.175.1.1.1.1.1 | InterfaceIndex | not-accessible | current |
| cilTargetModuleInterface OBJECT-TYPE Location of the managed entity on the target module. Following is the supported format for this object and all the values must be present. shelf=<value>, slot=<value>, subSlot=<value> port =<value>. The zero length value for this object is not supported. | 1.3.6.1.4.1.9.9.175.1.1.1.1.2 | CiscoLocationSpecifier | read-create | current |
| cilRowStatus OBJECT-TYPE This object is used to create a new row or modify or delete an existing row in the table. The cilTargetModuleFramingType need not be specified to create a row. If cilTargetModuleFramingType is not specified, a default value will be assumed as described in the description of cilTargetModuleFramingType. | 1.3.6.1.4.1.9.9.175.1.1.1.1.3 | RowStatus | read-create | current |
| cilTargetModuleFramingType OBJECT-TYPE This object identifies the framing type of the target interface. notApplicable(1) can not be set. dsx1ESF Extended SuperFrame DS1 (T1.107) dsx1D4 AT&T D4 format DS1 (T1.107) Default value is dsx1ESF(3) if cilTargetModuleInterface is a T1 interface and sonet/sdh byte-synchronous mapping is used on the cilSourceInterface. Otherwise, the default value is notApplicable(1). | 1.3.6.1.4.1.9.9.175.1.1.1.1.4 | INTEGER {notApplicable(1), dsx1D4(2), dsx1ESF(3)} | read-create | current |
| cilConfigMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.175.3 | |||
| cilConfigMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.175.3.1 | |||
| cilConfigMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.175.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cilConfigMIBCompliance MODULE-COMPLIANCE The Compliance statement for interface link configuration group. This has been replaced by the cilConfigMIBComplianceRev1 statement. | 1.3.6.1.4.1.9.9.175.3.1.1 | deprecated |
| cilConfigMIBComplianceRev1 MODULE-COMPLIANCE The Compliance statement for interface link configuration group. This statement replaces cilConfigMIBCompliance statement. | 1.3.6.1.4.1.9.9.175.3.1.2 | current |
| cilConfMIBGroup OBJECT-GROUP These are objects related to interface link configuration group. This group has been replaced by cilConfMIBGroupRev1. | 1.3.6.1.4.1.9.9.175.3.2.1 | deprecated |
| cilConfMIBGroupRev1 OBJECT-GROUP These are objects related to interface link configuration group. This group replaces the cilConfMIBGroup. | 1.3.6.1.4.1.9.9.175.3.2.2 | current |