MIBs Depot

CISCO-IETF-VPLS-LDP-MIB

Registered at
1.3.6.1.4.1.9.10.141
Last updated
2007-11-22 12:00
Organization
Cisco Systems, Inc.
Revisions
2007-11-22 12:00
Namespace
cisco
Source file
CISCO-IETF-VPLS-LDP-MIB
Digest
sha256:b463ab0726819778b74d097317ff4aecaa29e768f8574c787fc7465fa1b75385

Description

This MIB module contains managed object definitions for LDP signalled Virtual Private LAN Services as in [L2VPN-VPLS-LDP] This MIB module enables the use of any underlying Pseudo Wire network. This MIB is based on the following IETF document. http://www1.tools.ietf.org/html/draft-nadeau-l2vpn-vpls-mib-03

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-l2vpn@cisco.com

Imports

FromSymbols
CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndex, cvplsPwBindIndex
CISCO-SMIciscoExperiment
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue
VPN-TC-STD-MIBVPNId

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-IETF-PW-TC-MIB
CISCO-IETF-VPLS-GENERIC-MIB
CISCO-IETF-VPLS-LDP-MIB
CISCO-SMI
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
VPN-TC-STD-MIB

Objects

NameOIDSyntaxAccessStatus
cvplsLdpObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.10.141.1
cvplsLdpConfigTable
OBJECT-TYPE
This table specifies information for configuring and monitoring LDP specific parameters for Virtual Private Lan Services(VPLS).
1.3.6.1.4.1.9.10.141.1.1not-accessiblecurrent
cvplsLdpConfigEntry
OBJECT-TYPE
A row in this table represents LDP specific information for Virtual Private Lan Service(VPLS) in a packet network. It is indexed by cvplsConfigIndex, which uniquely identifies a single VPLS. A row is automatically created when a VPLS service is configured using LDP signalling. None of the read-create objects values can be changed when cvplsRowStatus is in the active(1) state. Changes are allowed when the cvplsRowStatus is in notInService(2) or notReady(3) states only. If the operator need to change one of the values for an active row the cvplsConfigRowStatus should be first changed to notInService(2), the objects may be changed now, and later to active(1) in order to re-initiate the signaling process with the new values in effect.
1.3.6.1.4.1.9.10.141.1.1.1not-accessiblecurrent
cvplsLdpConfigMacAddrWithdraw
OBJECT-TYPE
This object specifies if MAC address withdrawl is enabled in this service. If this object is true then Mac address withdrawl Learning is enabled. If false, then Mac Learning is disabled.
1.3.6.1.4.1.9.10.141.1.1.1.1TruthValueread-createcurrent
cvplsLdpPwBindTable
OBJECT-TYPE
This table provides LDP specific information for an association between a VPLS service and the corresponding Pseudo Wires. A service can have more than one Pseudo Wire association. Pseudo Wires are defined in the cpwTable.
1.3.6.1.4.1.9.10.141.1.2not-accessiblecurrent
cvplsLdpPwBindEntry
OBJECT-TYPE
Each row represents an association between a VPLS instance and one or more Pseudo Wires defined in the cpwTable. Each index is unique in describing an entry in this table. However both indexes are required to define the one to many association of service to pseudowire. An entry in this table is instantiated only when LDP signalling is used to configure VPLS service. Each entry in this table provides LDP specific information for the VPlS represented by cvplsConfigIndex.
1.3.6.1.4.1.9.10.141.1.2.1not-accessiblecurrent
cvplsLdpPwBindMacAddressLimit
OBJECT-TYPE
The value of this object specifies the maximum number of learned and static entries allowed in the Forwarding database for this PW Binding. The value 0 means there is no limit for this PW Binding.
1.3.6.1.4.1.9.10.141.1.2.1.1Unsigned32 (0..4294967295)read-createcurrent
cvplsLdpConformance
OBJECT-IDENTITY
1.3.6.1.4.1.9.10.141.2
cvplsLdpCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.10.141.2.1
cvplsLdpGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.10.141.2.2

Conformance

NameOIDStatus
cvplsLdpModuleFullCompliance
MODULE-COMPLIANCE
Compliance requirement for implementations that provide full support for CISCO-IETF-VPLS-LDP-MIB. Such devices can then be monitored and configured using this MIB module.
1.3.6.1.4.1.9.10.141.2.1.1current
cvplsLdpModuleReadOnlyCompliance
MODULE-COMPLIANCE
Compliance requirement for implementations that only provide read-only support for CISCO-IETF-VPLS-LDP-MIB. Such devices can then be monitored but cannot be configured using this MIB modules.
1.3.6.1.4.1.9.10.141.2.1.2current
cvplsLdpGroup
OBJECT-GROUP
The group of objects supporting management of L2VPN VPLS services using LDP.
1.3.6.1.4.1.9.10.141.2.2.1current