CISCO-IETF-MEGACO-MIB
- Registered at
- 1.3.6.1.4.1.9.10.99999
- Last updated
- 2003-04-28 12:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2003-04-28 12:00
- Namespace
- cisco
- Source file
CISCO-IETF-MEGACO-MIB- Digest
sha256:ece143888843769696d4d3ad1b8a1a1252fab86ac6c6ea4df7b78811e810b047
Description
This MIB module is based on the Internet Draft draft-ietf-megaco-mib-05.txt. It defines the attributes of Megaco protocol. Reference: ITU H.248 (Rev. COM16-107).
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-voice-gateway@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoExperiment |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | AutonomousType, DisplayString, RowStatus, TEXTUAL-CONVENTION, TestAndIncr, TimeStamp |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-IETF-MEGACO-MIB CISCO-SMI IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CMediaGatewayId TEXTUAL-CONVENTION Possible Media Gateway Id that can be used to identify any media gateway uniquely | current | |||
| CMediaGatewayLinkId TEXTUAL-CONVENTION Possible Media Gateway Link Id that can be used to identify any media gateway link uniquely | current | |||
| CMediaGatewayTermId TEXTUAL-CONVENTION Possible Termination Id that can be used to identify any media gateway termination uniquely | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoIetfMegacoMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.99999.0 | |||
| ciscoIetfMegacoMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.99999.1 | |||
| cmedConfiguration OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.99999.1.1 | |||
| cmedLinkIdTable OBJECT-TYPE This table contains a nextLinkId for each Gateway. It provides the manager with the nextLinkId for use in creating new Gateway Table Entries. | 1.3.6.1.4.1.9.10.99999.1.1.1 | not-accessible | current | |
| cmedLinkIdEntry OBJECT-TYPE This table contains the NextLinkId for this Gateway and is indexed by mediaGatewayId. | 1.3.6.1.4.1.9.10.99999.1.1.1.1 | not-accessible | current | |
| cmedNextLinkId OBJECT-TYPE The Next Value for a cmedGatewayLinkId. Assists the manager in selecting a value for cmedGatewayLinkId. Using the TestAndIncr syntax, A Manager will 'lock' this variable, ensuring single access. | 1.3.6.1.4.1.9.10.99999.1.1.1.1.1 | TestAndIncr | read-write | current |
| cmedGatewayConfigTable OBJECT-TYPE A list of cmedGatewayConfigEntry objects. | 1.3.6.1.4.1.9.10.99999.1.1.2 | not-accessible | current | |
| cmedGatewayConfigEntry OBJECT-TYPE Entry holding configuration information about a group of Media Gateway Controllers sharing the same signaling link. | 1.3.6.1.4.1.9.10.99999.1.1.2.1 | not-accessible | current | |
| cmedGatewayId OBJECT-TYPE The unique Media Gateway Id which identifies this media gateway | 1.3.6.1.4.1.9.10.99999.1.1.2.1.1 | CMediaGatewayId | not-accessible | current |
| cmedGatewayLinkId OBJECT-TYPE The unique link id which identifies the signaling link that this gateway uses to communicate with the Gateway Controllers to form an H.248 association. | 1.3.6.1.4.1.9.10.99999.1.1.2.1.2 | CMediaGatewayLinkId | not-accessible | current |
| cmedGatewayLinkName OBJECT-TYPE A descriptive name of this signaling link / media gateway combination | 1.3.6.1.4.1.9.10.99999.1.1.2.1.3 | SnmpAdminString (SIZE(0..255)) | read-create | current |
| cmedGatewayIPAddress OBJECT-TYPE The IP address that the Media Gateway Controller will use to communicate with the Media Gateway. This object reflects the IP address over control PVC that user configures in cMediaGwIpConfigTable. The value 0.0.0.0 is returned if the entry is invalid. | 1.3.6.1.4.1.9.10.99999.1.1.2.1.4 | IpAddress | read-create | current |
| cmedGatewayPort OBJECT-TYPE TCP/UDP port number that the Media Gateway Controller will use to communicate with the Media Gateway. The value 0 is returned if the entry is invalid. | 1.3.6.1.4.1.9.10.99999.1.1.2.1.5 | Integer32 (0..65535) | read-create | current |
| cmedGatewayEncodingScheme OBJECT-TYPE The encoding scheme that would be used to encode the H.248 messages that are sent/received to/from the gateway controller | 1.3.6.1.4.1.9.10.99999.1.1.2.1.6 | INTEGER {text(1), binary(2)} | read-create | current |
| cmedGatewayProtocol OBJECT-TYPE Type of the control protocol in use notApplicable (1) - other (2) - Other (none from the list below) dss1-ip (3) - Q931+ ipdc (4) - IPDC megacov1 (5) - MEGACO/H.248 Version 1 megacov2 (6) - MEGACO/H.248 Version 2 mgcp (7) - MGCP | 1.3.6.1.4.1.9.10.99999.1.1.2.1.7 | INTEGER {notApplicable(1), other(2), dss1Ip(3), ipdc(4), megacov1(5), megacov2(6), mgcp(7)} | read-create | current |
| cmedGatewaySigTptProtocol OBJECT-TYPE Type of the transport protocol that is being used to transport the H.248 signaling traffic | 1.3.6.1.4.1.9.10.99999.1.1.2.1.8 | INTEGER {tcp(1), udp(2), sctp(3), other(4)} | read-create | current |
| cmedGatewayAdminStatus OBJECT-TYPE The desired state of the gateway. The testing(3) state indicates that no signaling packets can be passed. When a managed system initializes, all gateways start with cmedGatewayAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, cmedGatewayAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state). | 1.3.6.1.4.1.9.10.99999.1.1.2.1.9 | INTEGER {up(1), down(2), testing(3)} | read-create | current |
| cmedGatewayOperStatus OBJECT-TYPE The current operational state of the gateway. up (1) - ready to communicate with MGC down (2) testing(3) - in some test mode unknown(4) - status can not be determined for some reason. The testing(3) state indicates that no signaling packets can be passed. If cmedGatewayAdminStatus is down(2) then cmedGatewayOperStatus should be down(2). If cmedGatewayAdminStatus is changed to up(1) then cmedGatewayOperStatus should change to up(1) if the gateway is ready to transmit and receive signaling traffic; it should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state | 1.3.6.1.4.1.9.10.99999.1.1.2.1.10 | INTEGER {up(1), down(2), testing(3), unknown(4)} | read-only | current |
| cmedGatewayLastStatusChange OBJECT-TYPE The value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. | 1.3.6.1.4.1.9.10.99999.1.1.2.1.11 | TimeStamp | read-only | current |
| cmedGatewayResetStatistics OBJECT-TYPE This object can be used to reset all statistics collected for this media gateway link so far. Statistics will be reset when the object is SET to 'reset'. Upon reset, the agent changes the value of this object to 'notApplicable'. | 1.3.6.1.4.1.9.10.99999.1.1.2.1.12 | INTEGER {notApplicable(1), other(2), reset(3)} | read-create | current |
| cmedGatewayRowStatus OBJECT-TYPE This is used to create new rows, modify existing rows and to delete existing rows. | 1.3.6.1.4.1.9.10.99999.1.1.2.1.13 | RowStatus | read-create | current |
| cmedGwyControllerTable OBJECT-TYPE List of the Media Gateway Controllers that are managed in the network | 1.3.6.1.4.1.9.10.99999.1.1.3 | not-accessible | current | |
| cmedGwyControllerEntry OBJECT-TYPE Entry holding information about an individual Media Gateway Controller. | 1.3.6.1.4.1.9.10.99999.1.1.3.1 | not-accessible | current | |
| cmedGwyControllerId OBJECT-TYPE An unique identification number that is assigned to the gateway controller by the manager | 1.3.6.1.4.1.9.10.99999.1.1.3.1.1 | Unsigned32 (1..2147483647) | not-accessible | current |
| cmedGwyControllerIPAddress OBJECT-TYPE The IP address of the Media Gateway Controller. The value 0.0.0.0 is returned if the entry is invalid. | 1.3.6.1.4.1.9.10.99999.1.1.3.1.2 | IpAddress | read-write | current |
| cmedGwyControllerPort OBJECT-TYPE TCP port of the Media Gateway Controller. The value 0 is returned if the entry is invalid. | 1.3.6.1.4.1.9.10.99999.1.1.3.1.3 | Integer32 (0..65535) | read-write | current |
| cmedGwyControllerAdminStatus OBJECT-TYPE The desired state of the gateway. The testing(3) state indicates that no signaling packets can be passed. When a managed system initializes, all gateways start with cmedGwyControllerAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, cmedGwyControllerAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state). | 1.3.6.1.4.1.9.10.99999.1.1.3.1.4 | INTEGER {up(1), down(2), testing(3)} | read-write | current |
| cmedGwyControllerOperStatus OBJECT-TYPE The current operational state of the gateway controller. The standby(3) state indicates that it is in the standby mode and no signaling packets can be passed. If cmedGwyControllerAdminStatus is down(2) then cmedGwyControllerOperStatus should be down(2). If cmedGwyControllerAdminStatus is changed to up(1), then cmedGwyControllerOperStatus should change to up(1). If the gateway controller is ready to transmit and receive signaling traffic; it should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state | 1.3.6.1.4.1.9.10.99999.1.1.3.1.5 | INTEGER {up(1), down(2), standby(3)} | read-only | current |
| cmedStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.99999.1.2 | |||
| cmedGatewayStatsTable OBJECT-TYPE A list of mediaGatewayTableEntry objects. | 1.3.6.1.4.1.9.10.99999.1.2.1 | not-accessible | current | |
| cmedGatewayStatsEntry OBJECT-TYPE Entry holding statistics about a group of media Gateway/signaling link pair | 1.3.6.1.4.1.9.10.99999.1.2.1.1 | not-accessible | current | |
| cmedNumInMessages OBJECT-TYPE Total number of messages received on the link. | 1.3.6.1.4.1.9.10.99999.1.2.1.1.1 | Counter32 | read-only | current |
| cmedNumInOctets OBJECT-TYPE Total number of octets received on the link. | 1.3.6.1.4.1.9.10.99999.1.2.1.1.2 | Counter32 | read-only | current |
| cmedNumOutMessages OBJECT-TYPE Total number of messages sent on the link. | 1.3.6.1.4.1.9.10.99999.1.2.1.1.3 | Counter32 | read-only | current |
| cmedNumOutOctets OBJECT-TYPE Total number of octets sent on the link. | 1.3.6.1.4.1.9.10.99999.1.2.1.1.4 | Counter32 | read-only | current |
| cmedNumErrors OBJECT-TYPE Total number of signaling-level errors encountered. Includes, but is not limited to, number of bad messages received, number of failures to sent a message and number of other errors. | 1.3.6.1.4.1.9.10.99999.1.2.1.1.5 | Counter32 | read-only | current |
| cmedNumTimerRecovery OBJECT-TYPE Total Number of timer recovery events since the statistics was last reset. This reflects all protocol timers that are supported (For H.248, T - start timer, S - short timer, L - long timer, and Z - long duration timer etc) | 1.3.6.1.4.1.9.10.99999.1.2.1.1.6 | Counter32 | read-only | current |
| cmedTransportNumLosses OBJECT-TYPE Number of times a transport link was lost (excluding switch-over cases). A link loss is defined as loss of communication with the entity (MGC) due to hardware/transient problems in the interface or other related hardware/software | 1.3.6.1.4.1.9.10.99999.1.2.1.1.7 | Counter32 | read-only | current |
| cmedTransportNumSwitchover OBJECT-TYPE Number of times when the signaling was switched over to an alternative link. This includes switchover due to the Handoffs initiated by the gateway controllers | 1.3.6.1.4.1.9.10.99999.1.2.1.1.8 | Counter32 | read-only | current |
| cmedTransportTotalNumAlarms OBJECT-TYPE Total number of all alarms issued for the transport layer. | 1.3.6.1.4.1.9.10.99999.1.2.1.1.9 | Counter32 | read-only | current |
| cmedTransportLastEvent OBJECT-TYPE Last event reported by the transport layer. notApplicable (1) - Invalid/unknown. other (2) - None from the list below. linkUp (3) - Transport link is up. linkLoss (4) - Transport link loss. persistentError (5) - No link - persistent error. linkShutdown (6) - Link is shut down. switchOver (7) - Fail-over. | 1.3.6.1.4.1.9.10.99999.1.2.1.1.10 | INTEGER {notApplicable(1), other(2), linkUp(3), linkLoss(4), persistentError(5), linkShutdown(6), switchOver(7)} | read-only | current |
| cmedTransportLastEventTime OBJECT-TYPE The value of sysUpTime at the time when the event specified by cmedTransportLastEvent occurred. If the last event occurred prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. | 1.3.6.1.4.1.9.10.99999.1.2.1.1.11 | TimeStamp | read-only | current |
| cmedLastStatisticsReset OBJECT-TYPE The value of sysUpTime at the time when the statistics were reset. If the reset occurred prior to the last re-initialization of the local network management subsystem, this object contains a zero value. | 1.3.6.1.4.1.9.10.99999.1.2.1.1.12 | TimeStamp | read-only | current |
| cmedConnections OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.99999.1.3 | |||
| cmedTermIdTable OBJECT-TYPE This table contains a nextTerminationId for each Gateway. It provides the manager with the nextTerminationId for use in creating a new TerminationsTable Entry. | 1.3.6.1.4.1.9.10.99999.1.3.1 | not-accessible | current | |
| cmedTermIdEntry OBJECT-TYPE This table contains a nextTerminationId for each Gateway, and is indexed by mediaGatewayId. | 1.3.6.1.4.1.9.10.99999.1.3.1.1 | not-accessible | current | |
| cmedNextTerminationId OBJECT-TYPE The Next Value for a MediaGateway TerminationId. Assists the manager in selecting a value for cmedTermId. Using the TestAndIncr syntax, A Manager will 'lock' this variable, ensuring single access. | 1.3.6.1.4.1.9.10.99999.1.3.1.1.1 | TestAndIncr | read-write | current |
| cmedTerminationsTable OBJECT-TYPE This table contains information about terminations in a media gateway. It is a list of terminations. The number of entries equals to the total number of terminations for all contexts in a gateway. | 1.3.6.1.4.1.9.10.99999.1.3.2 | not-accessible | current | |
| cmedTerminationsEntry OBJECT-TYPE It contains objects that describe a termination. | 1.3.6.1.4.1.9.10.99999.1.3.2.1 | not-accessible | current | |
| cmedTermId OBJECT-TYPE An unique identification number that is assigned to the termination by a media gateway. This is the TerminationId that would be used in the protocol messages that are sent from the gateway | 1.3.6.1.4.1.9.10.99999.1.3.2.1.1 | CMediaGatewayTermId | not-accessible | current |
| cmedTermName OBJECT-TYPE A descriptive name that would describe this termination and its use. For example, 'emergency-ds0-1' indicating that this termination is reserved as an emergency DS0 channel | 1.3.6.1.4.1.9.10.99999.1.3.2.1.2 | SnmpAdminString (SIZE(0..64)) | read-create | current |
| cmedTermAdminStatus OBJECT-TYPE The desired state of the termination. The testing(3) state indicates that no connections can be created for this termination. When a managed system initializes, all terminations start with cmedTermAdminStatus in the outOfService(2) state. As a result of either explicit management action or per configuration information retained by the managed system, cmedTermAdminStatus is then changed to either the inService(1) or testing(3) states (or remains in the outOfService(2) state). | 1.3.6.1.4.1.9.10.99999.1.3.2.1.3 | INTEGER {inService(1), outOfService(2), testing(3)} | read-create | current |
| cmedTermOperStatus OBJECT-TYPE The current operational state of the termination. The testing(3) state indicates that it is in the testing mode and no connections can be created on it. If cmedTermAdminStatus is outOfService(2) then cmedTermOperStatus should be down(2). If cmedTermAdminStatus is changed to up(1) then cmedTermOperStatus should change to up (1) and the termination is ready to accept connections; it should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state | 1.3.6.1.4.1.9.10.99999.1.3.2.1.4 | INTEGER {up(1), down(2), testing(3)} | read-only | current |
| cmedTermInterfaceIdentifier OBJECT-TYPE A number that uniquely identifies the interface in the physical gateway. This is the ifIndex in the ifTable, that this termination would be using to communicate to other gateways | 1.3.6.1.4.1.9.10.99999.1.3.2.1.5 | InterfaceIndex | read-create | current |
| cmedTermPropertyProfileId OBJECT-TYPE This determines the profile of the termination which determines what kind of capabilities this termination has. This is an index into the cmedPropertyProfileTable which identifies all the profile that are available | 1.3.6.1.4.1.9.10.99999.1.3.2.1.6 | Unsigned32 (1..2147483647) | read-create | current |
| cmedTermRowStatus OBJECT-TYPE This is used to create new rows in this table, Modify existing rows, and to delete existing rows. | 1.3.6.1.4.1.9.10.99999.1.3.2.1.7 | RowStatus | read-create | current |
| cmedPropertyProfileTable OBJECT-TYPE This table contains a list of the properties supported in a Profile. A Manager builds a Profile of properties, then ties each termination to a defined profile | 1.3.6.1.4.1.9.10.99999.1.3.3 | not-accessible | current | |
| cmedPropertyProfileEntry OBJECT-TYPE Each row represents a default property of the Property Profile N-entries per mediaGatewayId/PropertyId, one entry per property. | 1.3.6.1.4.1.9.10.99999.1.3.3.1 | not-accessible | current | |
| cmedPropertyProfileId OBJECT-TYPE This PropertyProfile Identifier uniquely identifies this set of properties. This is the value each termination would refer, when they would like to support all the properties in this profile | 1.3.6.1.4.1.9.10.99999.1.3.3.1.1 | Unsigned32 (1..2147483647) | not-accessible | current |
| cmedPropertyProfileIndex OBJECT-TYPE This is the index to the PropertyProfile This is just a 'counter' through the cmedPropertyProfile Table. ie, property=1 property=2 etc. | 1.3.6.1.4.1.9.10.99999.1.3.3.1.2 | Unsigned32 (1..2147483647) | not-accessible | current |
| cmedPropertyProfileProperty OBJECT-TYPE The Property supported by this Profile. This is an Object ID (OID) defined in a package MIB to identify a Particular property (such as AnalogLines, Tones etc). | 1.3.6.1.4.1.9.10.99999.1.3.3.1.3 | AutonomousType | read-create | current |
| cmedPropertyProfileRowStatus OBJECT-TYPE It is used to create new rows in this table, modify existing rows, and to delete existing rows. | 1.3.6.1.4.1.9.10.99999.1.3.3.1.4 | RowStatus | read-create | current |
| cmedProperties OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.99999.1.4 | |||
| ciscoIetfMegacoMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.99999.3 | |||
| cmedCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.99999.3.1 | |||
| cmedConfigGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.99999.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cmedCompliance MODULE-COMPLIANCE Compliance statement for entities which implement the CISCO-IETF-MEGACO-MIB. | 1.3.6.1.4.1.9.10.99999.3.1.1 | current |
| cmedConfig OBJECT-GROUP This group contains of all the configuration Information for a Media Gateway. This group is mandatory for any implementation managing a media gateway or a group of media gateways | 1.3.6.1.4.1.9.10.99999.3.2.1 | current |
| cmedStatsGroup OBJECT-GROUP This group contains of all the statistics Information for a Media Gateway. This group is mandatory for any implementation managing a media gateway or a group of media gateways | 1.3.6.1.4.1.9.10.99999.3.2.2 | current |
| cmedGwyControllerGroup OBJECT-GROUP This group contains of all the configuration Information for a Media Gateway Controller. This group is mandatory for any implementation managing a media gateway controller or a group of media gateway controllers. It is also mandatory for implementations managing media gateway(s) | 1.3.6.1.4.1.9.10.99999.3.2.3 | current |
| cmedNextIdGroup OBJECT-GROUP Agent provides NextId's to the Manager to assist in selecting and creating new table entries. This group is optional for all the implementations. But when it is not implemented, it is the manager's responsibility to uniquely determine these ids | 1.3.6.1.4.1.9.10.99999.3.2.4 | current |
| cmedTermGroup OBJECT-GROUP This group contains of all the configuration Information for a termination. This group is mandatory for any implementation managing termination. | 1.3.6.1.4.1.9.10.99999.3.2.5 | current |