MIBs Depot

CISCO-IDSL-LINE-MIB

Registered at
1.3.6.1.4.1.9.9.154
Last updated
2000-01-20 00:36
Organization
Cisco Systems, Inc.
Revisions
2000-01-20 00:36
Namespace
cisco
Source file
CISCO-IDSL-LINE-MIB
Digest
sha256:6056569fcf09c985be31bad2373c0052bbaeed09c2f60c19bd2aa92e89dec552

Description

This MIB module describes IDSL (ISDN Digital Line Subscriber) line interfaces. The structure of this module resembles that of the ADSL-LINE-MIB (RFC-2662). Observe that the tables in this module do not necessarily extend the tables defined by the ADSL-LINE-MIB. Currently, only those tables that contain configuration information extend the profile tables defined by the ADSL-LINE-MIB. This allows the management client to define xDSL configuration profiles that apply across all xDSL modems, independent of the technology being utilized by the modem. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS *** ADSL - Asymmetric Digital Subscriber Line. ATM - Asynchronous Transfer Mode. BRITE - Basic Rate Interface Terminal Extender. CV - Coding Violation. DLC - Data Link Connection. DSL - Digital Subscriber Line. ES - Error Second. IDSL - IDSN Digital Subscriber Loop. ITU-C - IDSL Transceiver Unit, Central Office end. ITU-R - IDSL Transceiver Unit, Remote terminal end. LMI - Link Management Interface. LOF - Loss Of Frame. LOS - Loss Of Signal. NT - Network Terminator. PPP - Point-to-Point Protocol. PPPoA - PPP over ATM. SES - Severely Errored Second. *** DEFINITIONS *** CODING VIOLATION A coding violation occurs when the incoming signal exhibits a CRC anomaly. DOWNSTREAM The flow of data in the direction from the ITU-C to ITU-R. ERRORED SECOND A second with one or more coding violations. LINE RATE The total data rate supported by a line. Observe that the payload rate is equal the line rate for the earliest implementations of IDSL. However, the payload rate maybe less than the line rate for future implementations. SEVERELY ERRORED SECOND A second with 3 or more coding violations. UPSTREAM The flow of data in the direction from the ATU-R to ATU-C.

Contact

Cisco System Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 Tel: +1 800 555-NETS E-mail: cs-dslam@cisco.com

Imports

FromSymbols
ADSL-LINE-MIBAdslLineProfileName, adslLineConfProfileName
CISCO-SMIciscoMgmt
IF-MIBInterfaceIndex, ifIndex
PerfHist-TC-MIBPerfCurrentCount, PerfIntervalCount
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue, VariablePointer

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ADSL-LINE-MIB
ADSL-TC-MIB
CISCO-IDSL-LINE-MIB
CISCO-SMI
IANAifType-MIB
IF-MIB
PerfHist-TC-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
IdslPerfCurrDayCount
TEXTUAL-CONVENTION
A counter associated with interval performance measurements in a current 1-day (24 hour) measurement interval. The value of this counter starts at zero at the beginning of an interval and increases when associated events occur, until the end of the 1-day interval. At that time, the agent stores the value of the counter in the previous 1-day history interval, if available, and resets the value of the counter to zero. In the case where the agent has no valid data available for this interval, the corresponding object instance is not available. In this case, the agent will respond with the appropriate error indicating that the instance does not exist; that is, 'noSuchName' in response to a SNMPv1 get request, and 'noSuchInstance' in response to a SNMPv2 get request.
current
IdslPerfPrevDayCount
TEXTUAL-CONVENTION
A counter associated with interval performance measurements during the most previous 1-day (24 hour) measurement interval. The value of this counter is equal to the current day counter at the end of its most recent interval. In the case where the agent has no valid data available for this interval, the corresponding object instance is not available. In this case, the agent will respond with the appropriate error indicating that the instance does not exist; that is, 'noSuchName' in response to a SNMPv1 get request, and 'noSuchInstance' in response to a SNMPv2 get request.
current
IdslPerfTimeElapsed
TEXTUAL-CONVENTION
The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
current

Objects

NameOIDSyntaxAccessStatus
ciscoIdslLineMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.154.1
cIdslLineTable
OBJECT-TYPE
This table contains the common attributes describing both ends of IDSL lines supported by the system.
1.3.6.1.4.1.9.9.154.1.1not-accessiblecurrent
cIdslLineEntry
OBJECT-TYPE
A set of common attributes describing both ends of an IDSL line supported by the system. There exists an entry for each ifEntry with an ifType of idsl(154).
1.3.6.1.4.1.9.9.154.1.1.1not-accessiblecurrent
cIdslLineSpecific
OBJECT-TYPE
This object specifies an object identifier of an instance of an object in the MIB. The implementation determines the application of this object. For example, an implementation may use this object to provide a reference to the port-class physical entity (see the ENTITY-MIB for further details) corresponding to the IDSL line.
1.3.6.1.4.1.9.9.154.1.1.1.1VariablePointerread-onlycurrent
cIdslLineConfProfile
OBJECT-TYPE
This object specifies the row in the adslLineConfProfileTable (see the ADSL-LINE-MIB for further details), which applies for this IDSL line interface. In the case the implementation utilizes 'dynamic mode' (see the ADSL-LINE-MIB for further details), then the value of this object defaults to the name of a configuration profile designated by the implementation as the default configuration profile. In the case the implementation utilizes 'static mode', then the the value of this object is read-only.
1.3.6.1.4.1.9.9.154.1.1.1.2AdslLineProfileNameread-writecurrent
cIdslLineAlarmConfProfile
OBJECT-TYPE
This object specifies the row in the adslLineAlarmConfProfileTable (see the ADSL-LINE-MIB for further details), which applies for this IDSL line interface. In the case the implementation utilizes 'dynamic mode' (see the ADSL-LINE-MIB for further details), then the value of this object defaults to the name of an alarm configuration profile designated by the implementation as the default alarm configuration profile. In the case the implementation utilizes 'static mode', then the the value of this object is read-only.
1.3.6.1.4.1.9.9.154.1.1.1.3AdslLineProfileNameread-writecurrent
cIdslItucPhysTable
OBJECT-TYPE
This table contains physical-layer parameters for ITU-C class devices supported by the system.
1.3.6.1.4.1.9.9.154.1.2not-accessiblecurrent
cIdslItucPhysEntry
OBJECT-TYPE
A set of physical-layer parameters for an ITU-C class device supported by the system. There exists an entry for each ifEntry with an ifType of idsl(154).
1.3.6.1.4.1.9.9.154.1.2.1not-accessiblecurrent
cIdslItucInvSerialNumber
OBJECT-TYPE
This object specifies the vendor specific string that identifies the vendor ITU-C.
1.3.6.1.4.1.9.9.154.1.2.1.1SnmpAdminStringread-onlycurrent
cIdslItucInvVendorId
OBJECT-TYPE
This object specifies the vendor identifier assigned according to ANSI T1.220.
1.3.6.1.4.1.9.9.154.1.2.1.2SnmpAdminStringread-onlycurrent
cIdslItucInvVersionNumber
OBJECT-TYPE
This object specifies the vendor specific version number of the ITU-C.
1.3.6.1.4.1.9.9.154.1.2.1.3SnmpAdminStringread-onlycurrent
cIdslItucStatus
OBJECT-TYPE
This object specifies the state of the ITU-C transceiver: - loopDown The IDSL link is down, as a result of a near-end has detected a LOS, a LOF, has not exchanged an ACT bit with the downstream BRITE/NT1, or similar fault/condition. - dslSync The IDSL link has achieved physical layer activation with the first downstream entity (iether a BRITE or the NT1). - loopUp The IDSL link has exchanged the ACT bit with the NT1, but LMI signalling is not yet active. This is the normal operating state for PPP operation. - loopUpLmiActive The IDSL link has exchnaged the ACT bit with the NT1 and the LMI signalling is active. This is the normal operating state for frame relay operation.
1.3.6.1.4.1.9.9.154.1.2.1.4INTEGER {loopDown(1), dslSync(2), loopUp(3), loopUpLmiActive(4)}read-onlycurrent
cIdslItucPerfDataTable
OBJECT-TYPE
This table contains physical-layer statistics for ITU-C class devices supported by the system.
1.3.6.1.4.1.9.9.154.1.6not-accessiblecurrent
cIdslItucPerfDataEntry
OBJECT-TYPE
A set of physical-layer statistics for an ITU-C class device supported by the system. There exists an entry for each ifEntry with an ifType of idsl(154).
1.3.6.1.4.1.9.9.154.1.6.1not-accessiblecurrent
cIdslItucPerfCVs
OBJECT-TYPE
This object specifies the number of coding violations experienced by the ITU-C since agent reset.
1.3.6.1.4.1.9.9.154.1.6.1.1Counter32read-onlycurrent
cIdslItucPerfESs
OBJECT-TYPE
This object specifies the number of errored seconds experienced by the ITU-C since agent reset.
1.3.6.1.4.1.9.9.154.1.6.1.2Counter32read-onlycurrent
cIdslItucPerfSESs
OBJECT-TYPE
This object specifies the number of severely errored seconds experienced by the ITU-C since agent reset.
1.3.6.1.4.1.9.9.154.1.6.1.3Counter32read-onlycurrent
cIdslItucPerfHdlcCVs
OBJECT-TYPE
This object specifies the number of HDLC coding violations experienced by the ITU-C since agent reset.
1.3.6.1.4.1.9.9.154.1.6.1.4Counter32read-onlycurrent
cIdslItucPerfHdlcAborts
OBJECT-TYPE
This object specifies the number of HDLC aborts experienced by the ITU-C since agent reset.
1.3.6.1.4.1.9.9.154.1.6.1.5Counter32read-onlycurrent
cIdslItucPerfHdlcAligns
OBJECT-TYPE
This object specifies the number of HDLC frames received by the ITU-C with a non-integral number of octets since agent reset.
1.3.6.1.4.1.9.9.154.1.6.1.6Counter32read-onlycurrent
cIdslItucPerfHdlcShorts
OBJECT-TYPE
This object specifies the number of short HDLC frames received by the ITU-C since agent reset. A short HDLC frame contains less than 5 octets.
1.3.6.1.4.1.9.9.154.1.6.1.7Counter32read-onlycurrent
cIdslItucPerfHdlcLongs
OBJECT-TYPE
This object specifies the number of long HDLC frames received by the ITU-C since agent reset. A long HDLC frame contains more than 1500 octets.
1.3.6.1.4.1.9.9.154.1.6.1.8Counter32read-onlycurrent
cIdslItucPerfValidIntervals
OBJECT-TYPE
The number of previous near-end performance data 15-minute intervals for which data was collected. The value will be <n> unless the measurement was (re-)started within the last (<n>*15) minutes, in which case the value will be the number of complete 15-minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
1.3.6.1.4.1.9.9.154.1.6.1.9INTEGER (0..96)read-onlycurrent
cIdslItucPerfInvalidIntervals
OBJECT-TYPE
The number of near-end performance data 15-minute intervals in the range from 0 to cSdslStucPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
1.3.6.1.4.1.9.9.154.1.6.1.10INTEGER (0..96)read-onlycurrent
cIdslItucPerfCurr15MinElapsed
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
1.3.6.1.4.1.9.9.154.1.6.1.11IdslPerfTimeElapsedread-onlycurrent
cIdslItucPerfCurr15MinCVs
OBJECT-TYPE
This object specifies the number of coding violations experienced by the ITU-C in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.6.1.12PerfCurrentCountread-onlycurrent
cIdslItucPerfCurr15MinESs
OBJECT-TYPE
This object specifies the number of errored seconds experienced by the ITU-C in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.6.1.13PerfCurrentCountread-onlycurrent
cIdslItucPerfCurr15MinSESs
OBJECT-TYPE
This object specifies the number of severely errored seconds experienced by the ITU-C in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.6.1.14PerfCurrentCountread-onlycurrent
cIdslItucPerfCurr15MinHdlcCVs
OBJECT-TYPE
This object specifies the number of HDLC coding violations experienced by the ITU-C in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.6.1.15PerfCurrentCountread-onlycurrent
cIdslItucPerfCurr15MinHdlcAborts
OBJECT-TYPE
This object specifies the number of HDLC aborts experienced by the ITU-C in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.6.1.16PerfCurrentCountread-onlycurrent
cIdslItucPerfCurr15MinHdlcAligns
OBJECT-TYPE
This object specifies the number of HDLC frames received by the ITU-C with a non-integral number of octets in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.6.1.17PerfCurrentCountread-onlycurrent
cIdslItucPerfCurr15MinHdlcShorts
OBJECT-TYPE
This object specifies the number of short HDLC frames received by the ITU-C since agent in the current 15-minute interval. A short HDLC frame contains less than 5 octets.
1.3.6.1.4.1.9.9.154.1.6.1.18PerfCurrentCountread-onlycurrent
cIdslItucPerfCurr15MinHdlcLongs
OBJECT-TYPE
This object specifies the number of long HDLC frames received by the ITU-C since agent in the current 15-minute interval. A long HDLC frame contains more than 1500 octets.
1.3.6.1.4.1.9.9.154.1.6.1.19PerfCurrentCountread-onlycurrent
cIdslItucPerfCurr1DayElapsed
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
1.3.6.1.4.1.9.9.154.1.6.1.20IdslPerfTimeElapsedread-onlycurrent
cIdslItucPerfCurr1DayCVs
OBJECT-TYPE
This object specifies the number of coding violations experienced by the ITU-C in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.21IdslPerfCurrDayCountread-onlycurrent
cIdslItucPerfCurr1DayESs
OBJECT-TYPE
This object specifies the number of errored seconds experienced by the ITU-C in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.22IdslPerfCurrDayCountread-onlycurrent
cIdslItucPerfCurr1DaySESs
OBJECT-TYPE
This object specifies the number of severely errored seconds experienced by the ITU-C in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.23IdslPerfCurrDayCountread-onlycurrent
cIdslItucPerfCurr1DayHdlcCVs
OBJECT-TYPE
This object specifies the number of HDLC coding violations experienced by the ITU-C in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.24IdslPerfCurrDayCountread-onlycurrent
cIdslItucPerfCurr1DayHdlcAborts
OBJECT-TYPE
This object specifies the number of HDLC aborts experienced by the ITU-C in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.25IdslPerfCurrDayCountread-onlycurrent
cIdslItucPerfCurr1DayHdlcAligns
OBJECT-TYPE
This object specifies the number of HDLC frames received by the ITU-C with a non-integral number of octets in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.26IdslPerfCurrDayCountread-onlycurrent
cIdslItucPerfCurr1DayHdlcShorts
OBJECT-TYPE
This object specifies the number of short HDLC frames received by the ITU-C since agent in the current 1-day interval. A short HDLC frame contains less than 5 octets.
1.3.6.1.4.1.9.9.154.1.6.1.27IdslPerfCurrDayCountread-onlycurrent
cIdslItucPerfCurr1DayHdlcLongs
OBJECT-TYPE
This object specifies the number of long HDLC frames received by the ITU-C since agent in the current 1-day interval. A long HDLC frame contains more than 1500 octets.
1.3.6.1.4.1.9.9.154.1.6.1.28IdslPerfCurrDayCountread-onlycurrent
cIdslItucPerfPrev1DayMoniSecs
OBJECT-TYPE
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
1.3.6.1.4.1.9.9.154.1.6.1.29INTEGER (0..86400)read-onlycurrent
cIdslItucPerfPrev1DayCVs
OBJECT-TYPE
This object specifies the number of coding violations experienced by the ITU-C in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.30IdslPerfPrevDayCountread-onlycurrent
cIdslItucPerfPrev1DayESs
OBJECT-TYPE
This object specifies the number of errored seconds experienced by the ITU-C in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.31IdslPerfPrevDayCountread-onlycurrent
cIdslItucPerfPrev1DaySESs
OBJECT-TYPE
This object specifies the number of severely errored seconds experienced by the ITU-C in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.32IdslPerfPrevDayCountread-onlycurrent
cIdslItucPerfPrev1DayHdlcCVs
OBJECT-TYPE
This object specifies the number of HDLC coding violations experienced by the ITU-C in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.33IdslPerfPrevDayCountread-onlycurrent
cIdslItucPerfPrev1DayHdlcAborts
OBJECT-TYPE
This object specifies the number of HDLC aborts experienced by the ITU-C in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.34IdslPerfPrevDayCountread-onlycurrent
cIdslItucPerfPrev1DayHdlcAligns
OBJECT-TYPE
This object specifies the number of HDLC frames received by the ITU-C with a non-integral number of octets in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.6.1.35IdslPerfPrevDayCountread-onlycurrent
cIdslItucPerfPrev1DayHdlcShorts
OBJECT-TYPE
This object specifies the number of long HDLC frames received by the ITU-C since agent in the previous 1-day interval. A long HDLC frame contains more than 1500 octets.
1.3.6.1.4.1.9.9.154.1.6.1.36IdslPerfPrevDayCountread-onlycurrent
cIdslItucPerfPrev1DayHdlcLongs
OBJECT-TYPE
This object specifies the number of long HDLC frames received by the ITU-C since agent in the previous 1-day interval. A long HDLC frame contains more than 1500 octets.
1.3.6.1.4.1.9.9.154.1.6.1.37IdslPerfPrevDayCountread-onlycurrent
cIdslIturPerfDataTable
OBJECT-TYPE
This table contains physical-layer statistics for ITU-R class devices supported by the system.
1.3.6.1.4.1.9.9.154.1.7not-accessiblecurrent
cIdslIturPerfDataEntry
OBJECT-TYPE
A set of physical-layer statistics for an ITU-R class device supported by the system. There exists an entry for each ifEntry with an ifType of idsl(154).
1.3.6.1.4.1.9.9.154.1.7.1not-accessiblecurrent
cIdslIturPerfCVs
OBJECT-TYPE
This object specifies the number of coding violations experienced by the ITU-R since agent reset.
1.3.6.1.4.1.9.9.154.1.7.1.1Counter32read-onlycurrent
cIdslIturPerfESs
OBJECT-TYPE
This object specifies the number of errored seconds experienced by the ITU-R since agent reset.
1.3.6.1.4.1.9.9.154.1.7.1.2Counter32read-onlycurrent
cIdslIturPerfSESs
OBJECT-TYPE
This object specifies the number of severely errored seconds experienced by the ITU-R since agent reset.
1.3.6.1.4.1.9.9.154.1.7.1.3Counter32read-onlycurrent
cIdslIturPerfValidIntervals
OBJECT-TYPE
The number of previous near-end performance data 15-minute intervals for which data was collected. The value will be <n> unless the measurement was (re-)started within the last (<n>*15) minutes, in which case the value will be the number of complete 15-minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
1.3.6.1.4.1.9.9.154.1.7.1.4INTEGER (0..96)read-onlycurrent
cIdslIturPerfInvalidIntervals
OBJECT-TYPE
The number of near-end performance data 15-minute intervals in the range from 0 to cSdslStucPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
1.3.6.1.4.1.9.9.154.1.7.1.5INTEGER (0..96)read-onlycurrent
cIdslIturPerfCurr15MinElapsed
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
1.3.6.1.4.1.9.9.154.1.7.1.6IdslPerfTimeElapsedread-onlycurrent
cIdslIturPerfCurr15MinCVs
OBJECT-TYPE
This object specifies the number of coding violations experienced by the ITU-R in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.7.1.7PerfCurrentCountread-onlycurrent
cIdslIturPerfCurr15MinESs
OBJECT-TYPE
This object specifies the number of errored seconds experienced by the ITU-R in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.7.1.8PerfCurrentCountread-onlycurrent
cIdslIturPerfCurr15MinSESs
OBJECT-TYPE
This object specifies the number of severely errored seconds experienced by the ITU-R in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.7.1.9PerfCurrentCountread-onlycurrent
cIdslIturPerfCurr1DayElapsed
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
1.3.6.1.4.1.9.9.154.1.7.1.10IdslPerfTimeElapsedread-onlycurrent
cIdslIturPerfCurr1DayCVs
OBJECT-TYPE
This object specifies the number of coding violations experienced by the ITU-R in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.7.1.11IdslPerfCurrDayCountread-onlycurrent
cIdslIturPerfCurr1DayESs
OBJECT-TYPE
This object specifies the number of errored seconds experienced by the ITU-R in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.7.1.12IdslPerfCurrDayCountread-onlycurrent
cIdslIturPerfCurr1DaySESs
OBJECT-TYPE
This object specifies the number of severely errored seconds experienced by the ITU-R in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.7.1.13IdslPerfCurrDayCountread-onlycurrent
cIdslIturPerfPrev1DayMoniSecs
OBJECT-TYPE
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
1.3.6.1.4.1.9.9.154.1.7.1.14INTEGER (0..86400)read-onlycurrent
cIdslIturPerfPrev1DayCVs
OBJECT-TYPE
This object specifies the number of coding violations experienced by the ITU-R in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.7.1.15IdslPerfPrevDayCountread-onlycurrent
cIdslIturPerfPrev1DayESs
OBJECT-TYPE
This object specifies the number of errored seconds experienced by the ITU-R in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.7.1.16IdslPerfPrevDayCountread-onlycurrent
cIdslIturPerfPrev1DaySESs
OBJECT-TYPE
This object specifies the number of severely errored seconds experienced by the ITU-R in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.7.1.17IdslPerfPrevDayCountread-onlycurrent
cIdslItucIntervalTable
OBJECT-TYPE
This table contains physical-layer statistics intervals for ITU-C class devices supported by the system.
1.3.6.1.4.1.9.9.154.1.8not-accessiblecurrent
cIdslItucIntervalEntry
OBJECT-TYPE
A 15-miute interval of physical-layer statistics for a ITU-C class device supported by the system. There exists up to 96 entries for each ifEntry with an ifType of idsl(154).
1.3.6.1.4.1.9.9.154.1.8.1not-accessiblecurrent
cIdslItucIntervalNumber
OBJECT-TYPE
The interval in which the statistics were collected, where the value of 1 represents the most recent interval, and the value of 96 represents the interval collected 24 hours ago. Intervals 2..96 are optional.
1.3.6.1.4.1.9.9.154.1.8.1.1INTEGER (1..96)read-onlycurrent
cIdslItucIntervalValidData
OBJECT-TYPE
This object specifies whether the data for this interval is valid.
1.3.6.1.4.1.9.9.154.1.8.1.2TruthValueread-onlycurrent
cIdslItucIntervalCVs
OBJECT-TYPE
This object specifies the number of coding violations experienced by the ITU-C in the interval.
1.3.6.1.4.1.9.9.154.1.8.1.3PerfIntervalCountread-onlycurrent
cIdslItucIntervalESs
OBJECT-TYPE
This object specifies the number of errored seconds experienced by the ITU-C in the interval.
1.3.6.1.4.1.9.9.154.1.8.1.4PerfIntervalCountread-onlycurrent
cIdslItucIntervalSESs
OBJECT-TYPE
This object specifies the number of severely errored seconds experienced by the ITU-C in the interval.
1.3.6.1.4.1.9.9.154.1.8.1.5PerfIntervalCountread-onlycurrent
cIdslItucIntervalHdlcCVs
OBJECT-TYPE
This object specifies the number of HDLC coding violations experienced by the ITU-C in the interval.
1.3.6.1.4.1.9.9.154.1.8.1.6PerfIntervalCountread-onlycurrent
cIdslItucIntervalHdlcAborts
OBJECT-TYPE
This object specifies the number of HDLC aborts experienced by the ITU-C in the interval.
1.3.6.1.4.1.9.9.154.1.8.1.7PerfIntervalCountread-onlycurrent
cIdslItucIntervalHdlcAligns
OBJECT-TYPE
This object specifies the number of HDLC frames received by the ITU-C with a non-integral number of octets in the interval.
1.3.6.1.4.1.9.9.154.1.8.1.8PerfIntervalCountread-onlycurrent
cIdslItucIntervalHdlcShorts
OBJECT-TYPE
This object specifies the number of short HDLC frames received by the ITU-C since agent in the interval. A short HDLC frame contains less than 5 octets.
1.3.6.1.4.1.9.9.154.1.8.1.9PerfIntervalCountread-onlycurrent
cIdslItucIntervalHdlcLongs
OBJECT-TYPE
This object specifies the number of long HDLC frames received by the ITU-C since agent in the interval. A long HDLC frame contains more than 1500 octets.
1.3.6.1.4.1.9.9.154.1.8.1.10PerfIntervalCountread-onlycurrent
cIdslIturIntervalTable
OBJECT-TYPE
This table contains physical-layer statistics intervals for ITU-R class devices supported by the system.
1.3.6.1.4.1.9.9.154.1.9not-accessiblecurrent
cIdslIturIntervalEntry
OBJECT-TYPE
A 15-miute interval of physical-layer statistics for a ITU-R class device supported by the system. There exists up to 96 entries for each ifEntry with an ifType of idsl(154).
1.3.6.1.4.1.9.9.154.1.9.1not-accessiblecurrent
cIdslIturIntervalNumber
OBJECT-TYPE
The interval in which the statistics were collected, where the value of 1 represents the most recent interval, and the value of 96 represents the interval collected 24 hours ago. Intervals 2..96 are optional.
1.3.6.1.4.1.9.9.154.1.9.1.1INTEGER (1..96)read-onlycurrent
cIdslIturIntervalValidData
OBJECT-TYPE
This object specifies whether the data for this interval is valid.
1.3.6.1.4.1.9.9.154.1.9.1.2TruthValueread-onlycurrent
cIdslIturIntervalCVs
OBJECT-TYPE
This object specifies the number of coding violations experienced by the ITU-R in the interval.
1.3.6.1.4.1.9.9.154.1.9.1.3PerfIntervalCountread-onlycurrent
cIdslIturIntervalESs
OBJECT-TYPE
This object specifies the number of errored seconds experienced by the ITU-R in the interval.
1.3.6.1.4.1.9.9.154.1.9.1.4PerfIntervalCountread-onlycurrent
cIdslIturIntervalSESs
OBJECT-TYPE
This object specifies the number of severely errored seconds experienced by the ITU-R in the interval.
1.3.6.1.4.1.9.9.154.1.9.1.5PerfIntervalCountread-onlycurrent
cIdslLineConfProfileTable
OBJECT-TYPE
This table extends the adslLineConfProfileTable and contains IDSL line configuration information.
1.3.6.1.4.1.9.9.154.1.14not-accessiblecurrent
cIdslLineConfProfileEntry
OBJECT-TYPE
A configuration profile containing enterprise-specific IDSL line configuration information.
1.3.6.1.4.1.9.9.154.1.14.1not-accessiblecurrent
cIdslLineConfRate
OBJECT-TYPE
This object specifies the desired line rate.
1.3.6.1.4.1.9.9.154.1.14.1.1INTEGER {rate144k(1), rate144kIdl(2), rate128k(3), rate64k(4), rate56k(5)}read-createcurrent
cIdslLineConfProtocol
OBJECT-TYPE
This object specifies the layer 2 protocol to be employed by the line, and more specifically the encapsulation type: - frf Specifies the frame relay layer 2 protocol defined by FRF.8. Observe that the encapsulation can be selected per virtual circuit. - pppMuxCisco Specifies the PPP using Cisco proprietary virtual circuit multiplexed encapsulation. - pppMuxIetf Specifies the PPP using virtual circuit multiplexed encapsulation defined by RFC-2364. - pppLlcIetf Specifies the PPP using the LLC (Link Layer Control) encapsulation defined by RFC-2364.
1.3.6.1.4.1.9.9.154.1.14.1.2INTEGER {frf(1), pppMuxCisco(2), pppMuxIetf(3), pppLlcIetf(4)}read-createcurrent
cIdslLineConfLmiProtocol
OBJECT-TYPE
This object identifies the local inband signaling protocol.
1.3.6.1.4.1.9.9.154.1.14.1.3INTEGER {noLmiConfigured(1), lmiRev1(2), ansiT1617D(3), ansiT1617B(4), itut933A(5), ansiT1617D1994(6)}read-createcurrent
cIdslLineConfLmiNetN392
OBJECT-TYPE
This object specifies the interval between successive status enquiry messages.
1.3.6.1.4.1.9.9.154.1.14.1.4INTEGER (1..10)read-createcurrent
cIdslLineConfLmiNetN393
OBJECT-TYPE
This object specifies the value of the network-side error threshold.
1.3.6.1.4.1.9.9.154.1.14.1.5INTEGER (1..10)read-createcurrent
cIdslLineConfLmiNetT392
OBJECT-TYPE
This object specifies the value of the network-side polling verification timer.
1.3.6.1.4.1.9.9.154.1.14.1.6INTEGER (5..30)read-createcurrent
cIdslLineConfUpcIntent
OBJECT-TYPE
This object specifies the default UPC (Usage Parameter Control) action for connections that do not explicitly specify a UPC action.
1.3.6.1.4.1.9.9.154.1.14.1.7INTEGER {pass(1), tagDrop(2), tag(3), drop(4)}read-createcurrent
cIdslLineConfBcDefault
OBJECT-TYPE
This object specifies the default BC (Committed Burst Size) for connections that do not explicitly specify a BC.
1.3.6.1.4.1.9.9.154.1.14.1.8Integer32read-createcurrent
cIdslPppoaPerfDataTable
OBJECT-TYPE
This table contains PPPoA statistics for those ITU-C class devices configured for PPP operation.
1.3.6.1.4.1.9.9.154.1.16not-accessiblecurrent
cIdslPppoaPerfDataEntry
OBJECT-TYPE
A set of PPPoA statistics for an ITU-C class device configured for PPP operation. There exists an entry for each ifEntry that meet the following criteria: 1) The ifEntry has an ifType of idsl(154); 2) The profile associated with the ITU-C class device specifies a value of 'ppp' for the cIdslLineProtocol object.
1.3.6.1.4.1.9.9.154.1.16.1not-accessiblecurrent
cIdslPppoaPerfRTOs
OBJECT-TYPE
This object specifies the number of frames that could not be completely reassembled due to a reassembly timeout before being transmitted over this PPP session since agent reset.
1.3.6.1.4.1.9.9.154.1.16.1.1Counter32read-onlycurrent
cIdslPppoaPerfCVs
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session exhibiting a coding violation since agent reset.
1.3.6.1.4.1.9.9.154.1.16.1.2Counter32read-onlycurrent
cIdslPppoaPerfShorts
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session containing less than 5 octets since agent reset.
1.3.6.1.4.1.9.9.154.1.16.1.3Counter32read-onlycurrent
cIdslPppoaPerfLongs
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session containing more than 1500 octets since agent reset.
1.3.6.1.4.1.9.9.154.1.16.1.4Counter32read-onlycurrent
cIdslPppoaPerfDiscards
OBJECT-TYPE
This object specifies the total number of frames intended for transmission over this PPP session that were discarded for any reason since agent reset.
1.3.6.1.4.1.9.9.154.1.16.1.5Counter32read-onlycurrent
cIdslPppoaPerfValidIntervals
OBJECT-TYPE
The number of previous near-end performance data 15-minute intervals for which data was collected. The value will be <n> unless the measurement was (re-)started within the last (<n>*15) minutes, in which case the value will be the number of complete 15-minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
1.3.6.1.4.1.9.9.154.1.16.1.6INTEGER (0..96)read-onlycurrent
cIdslPppoaPerfInvalidIntervals
OBJECT-TYPE
The number of near-end performance data 15-minute intervals in the range from 0 to cSdslStucPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
1.3.6.1.4.1.9.9.154.1.16.1.7INTEGER (0..96)read-onlycurrent
cIdslPppoaPerfCurr15MinElapsed
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
1.3.6.1.4.1.9.9.154.1.16.1.8IdslPerfTimeElapsedread-onlycurrent
cIdslPppoaPerfCurr15MinRTOs
OBJECT-TYPE
This object specifies the number of frames that could not be completely reassembled due to a reassembly timeout before being transmitted over this PPP session in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.16.1.9PerfCurrentCountread-onlycurrent
cIdslPppoaPerfCurr15MinCVs
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session exhibiting a coding violation in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.16.1.10PerfCurrentCountread-onlycurrent
cIdslPppoaPerfCurr15MinShorts
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session containing less than 5 octets in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.16.1.11PerfCurrentCountread-onlycurrent
cIdslPppoaPerfCurr15MinLongs
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session containing more than 1500 octets in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.16.1.12PerfCurrentCountread-onlycurrent
cIdslPppoaPerfCurr15MinDiscards
OBJECT-TYPE
This object specifies the total number of frames intended for transmission over this PPP session that were discarded for any reason in the current 15-minute interval.
1.3.6.1.4.1.9.9.154.1.16.1.13PerfCurrentCountread-onlycurrent
cIdslPppoaPerfCurr1DayElapsed
OBJECT-TYPE
The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
1.3.6.1.4.1.9.9.154.1.16.1.14IdslPerfTimeElapsedread-onlycurrent
cIdslPppoaPerfCurr1DayRTOs
OBJECT-TYPE
This object specifies the number of frames that could not be completely reassembled due to a reassembly timeout before being transmitted over this PPP session in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.16.1.15IdslPerfCurrDayCountread-onlycurrent
cIdslPppoaPerfCurr1DayCVs
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session exhibiting a coding violation in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.16.1.16IdslPerfCurrDayCountread-onlycurrent
cIdslPppoaPerfCurr1DayShorts
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session containing less than 5 octets in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.16.1.17IdslPerfCurrDayCountread-onlycurrent
cIdslPppoaPerfCurr1DayLongs
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session containing more than 1500 octets in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.16.1.18IdslPerfCurrDayCountread-onlycurrent
cIdslPppoaPerfCurr1DayDiscards
OBJECT-TYPE
This object specifies the total number of frames intended for transmission over this PPP session that were discarded for any reason in the current 1-day interval.
1.3.6.1.4.1.9.9.154.1.16.1.19IdslPerfCurrDayCountread-onlycurrent
cIdslPppoaPerfPrev1DayMoniSecs
OBJECT-TYPE
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
1.3.6.1.4.1.9.9.154.1.16.1.20INTEGER (0..86400)read-onlycurrent
cIdslPppoaPerfPrev1DayRTOs
OBJECT-TYPE
This object specifies the number of frames that could not be completely reassembled due to a reassembly timeout before being transmitted over this PPP session in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.16.1.21IdslPerfPrevDayCountread-onlycurrent
cIdslPppoaPerfPrev1DayCVs
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session exhibiting a coding violation in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.16.1.22IdslPerfPrevDayCountread-onlycurrent
cIdslPppoaPerfPrev1DayShorts
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session containing less than 5 octets in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.16.1.23IdslPerfPrevDayCountread-onlycurrent
cIdslPppoaPerfPrev1DayLongs
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session containing more than 1500 octets in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.16.1.24IdslPerfPrevDayCountread-onlycurrent
cIdslPppoaPerfPrev1DayDiscards
OBJECT-TYPE
This object specifies the total number of frames intended for transmission over this PPP session that were discarded for any reason in the previous 1-day interval.
1.3.6.1.4.1.9.9.154.1.16.1.25IdslPerfPrevDayCountread-onlycurrent
cIdslPppoaIntervalTable
OBJECT-TYPE
This table contains PPPoA statistics intervals for those ITU-C class devices configured for PPP operation.
1.3.6.1.4.1.9.9.154.1.17not-accessiblecurrent
cIdslPppoaIntervalEntry
OBJECT-TYPE
A 15-minute interval of PPPoA statistics intervals for a ITU-C class device configured for PPP operation. There exists up to 96 entries for each ifEntry that meets the following criteria: 1) The ifEntry has an ifType of idsl(154); 2) The profile associated with the ITU-C class device specifies a value of 'ppp' for the cIdslLineProtocol object.
1.3.6.1.4.1.9.9.154.1.17.1not-accessiblecurrent
cIdslPppoaIntervalNumber
OBJECT-TYPE
The interval in which the statistics were collected, where the value of 1 represents the most recent interval, and the value of 96 represents the interval collected 24 hours ago. Intervals 2..96 are optional.
1.3.6.1.4.1.9.9.154.1.17.1.1INTEGER (1..96)read-onlycurrent
cIdslPppoaIntervalValidData
OBJECT-TYPE
This object specifies whether the data for this interval is valid.
1.3.6.1.4.1.9.9.154.1.17.1.2TruthValueread-onlycurrent
cIdslPppoaIntervalRTOs
OBJECT-TYPE
This object specifies the number of frames that could not be completely reassembled due to a reassembly timeout before being transmitted over this PPP session in the interval.
1.3.6.1.4.1.9.9.154.1.17.1.3PerfIntervalCountread-onlycurrent
cIdslPppoaIntervalCVs
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session exhibiting a coding violation in the interval.
1.3.6.1.4.1.9.9.154.1.17.1.4PerfIntervalCountread-onlycurrent
cIdslPppoaIntervalShorts
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session containing less than 5 octets in the interval.
1.3.6.1.4.1.9.9.154.1.17.1.5PerfIntervalCountread-onlycurrent
cIdslPppoaIntervalLongs
OBJECT-TYPE
This object specifies the number of reassembled frames intended for transmission over this PPP session containing more than 1500 octets in the interval.
1.3.6.1.4.1.9.9.154.1.17.1.6PerfIntervalCountread-onlycurrent
cIdslPppoaIntervalDiscards
OBJECT-TYPE
This object specifies the total number of frames intended for transmission over this PPP session that were discarded for any reason in the interval.
1.3.6.1.4.1.9.9.154.1.17.1.7PerfIntervalCountread-onlycurrent
cIdslPppoaMapTable
OBJECT-TYPE
This table defines the mapping between PPP sessions and ATM VC.
1.3.6.1.4.1.9.9.154.1.18not-accessiblecurrent
cIdslPppoaMapEntry
OBJECT-TYPE
A mapping between a PPP session and an ATM VC. There exists an entry for each ifEntry that meet the following criteria: 1) The ifEntry has an ifType of idsl(154); 2) The profile associated with the ITU-C class device specifies a value of 'ppp' for the cIdslLineProtocol object.
1.3.6.1.4.1.9.9.154.1.18.1not-accessiblecurrent
cIdslPppoaMapIfIndex
OBJECT-TYPE
The ifIndex associated with the pseudo-ATM interface onto which the IDSL interface is being mapped.
1.3.6.1.4.1.9.9.154.1.18.1.1InterfaceIndexread-onlycurrent
cIdslPppoaMapVpi
OBJECT-TYPE
The VPI (Virtual Path Identifier) associated with the ATM VCL onto which the PPP session is being mapped.
1.3.6.1.4.1.9.9.154.1.18.1.2INTEGER (0..4095)read-writecurrent
cIdslPppoaMapVci
OBJECT-TYPE
The VCI (Virtual Circuit Identifier) associated with the ATM VCL onto which the PPP session is being mapped.
1.3.6.1.4.1.9.9.154.1.18.1.3INTEGER (0..65535)read-writecurrent
ciscoIdslLineMIBNotificationsPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.154.2
ciscoIdslLineMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.154.2.0
ciscoIdslLineMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.154.3
ciscoIdslLineMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.154.3.1
ciscoIdslLineMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.154.3.2

Conformance

NameOIDStatus
ciscoIdslLineMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities that implement the CISCO-IDSL-LINE-MIB. Implementation of this MIB is mandatory for any platform that supports one or more IDSL line interfaces.
1.3.6.1.4.1.9.9.154.3.1.1current
cIdslBasicGroup
OBJECT-GROUP
A collection of managed objects defining the basic operation of an IDSL line.
1.3.6.1.4.1.9.9.154.3.2.1current
cIdslPM15MinIntervalGroup
OBJECT-GROUP
A collection of managed objects defining performance data collection capability using 15-minute intervals.
1.3.6.1.4.1.9.9.154.3.2.2current