MIBs Depot

CISCO-FRAME-RELAY-MIB

Registered at
1.3.6.1.4.1.9.9.49
Last updated
2000-10-13 00:00
Organization
Cisco Systems, Inc.
Revisions
2000-10-13 00:00, 2000-05-22 00:00, 2000-05-16 00:00, 2000-04-26 00:00, 1999-08-21 00:00, 1996-08-15 00:00
Namespace
cisco
Source file
CISCO-FRAME-RELAY-MIB
Digest
sha256:4fff3f67b82f0b3a85a40dfc0121292c1adeb919e07102c1e3a3a2adc93fca72

Description

Cisco Frame Relay MIB

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-framerelay@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
IF-MIBInterfaceIndex, ifIndex
RFC1315-MIBfrCircuitDlci, frCircuitEntry, frCircuitIfIndex, frDlcmiEntry
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

3 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-FRAME-RELAY-MIB
CISCO-SMI
IANAifType-MIB
IF-MIB
RFC1315-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CfrMapProtocols
TEXTUAL-CONVENTION
Cisco link types (network protocols) that run over Frame Relay. Associated values, except for wildcard, match assigned values of internal software respectively.
current
DlciNumber
TEXTUAL-CONVENTION
Numerical format of Data Link Connection Identifier (DLCI) in decimal, identical to the 'DLCI' as INTEGER of 0..DLCINumber in RFC1315. The maximum value depends on Frame Relay implementation, which is currently set to be 1023 for 2-octet address format per UNI Implementation Agreement FRF.1.
current

Objects

NameOIDSyntaxAccessStatus
ciscoFrMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.1
cfrLmiObjs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.1.1
cfrLmiTable
OBJECT-TYPE
Table of Frame Relay LMI information that are either supplemental to the frDlcmiTable of RFC 1315 or specific to Cisco's implementation.
1.3.6.1.4.1.9.9.49.1.1.1not-accessiblecurrent
cfrLmiEntry
OBJECT-TYPE
Each entry of the table contains information of Frame Relay LMI over one physical interface. They are mostly FR generic and some Cisco specific.
1.3.6.1.4.1.9.9.49.1.1.1.1not-accessiblecurrent
cfrLmiLinkstatus
OBJECT-TYPE
Data link status via LMI.
1.3.6.1.4.1.9.9.49.1.1.1.1.1INTEGER {up(1), down(2)}read-onlycurrent
cfrLmiLinkType
OBJECT-TYPE
Frame Relay link type.
1.3.6.1.4.1.9.9.49.1.1.1.1.2INTEGER {dte(1), dce(2), nni(3)}read-onlycurrent
cfrLmiEnquiryIns
OBJECT-TYPE
Number of Status Enquiry messages received.
1.3.6.1.4.1.9.9.49.1.1.1.1.3Counter32read-onlycurrent
cfrLmiEnquiryOuts
OBJECT-TYPE
Number of Status Enquiry messages sent.
1.3.6.1.4.1.9.9.49.1.1.1.1.4Counter32read-onlycurrent
cfrLmiStatusIns
OBJECT-TYPE
Number of Status messages received.
1.3.6.1.4.1.9.9.49.1.1.1.1.5Counter32read-onlycurrent
cfrLmiStatusOuts
OBJECT-TYPE
Number of Status messages sent.
1.3.6.1.4.1.9.9.49.1.1.1.1.6Counter32read-onlycurrent
cfrLmiUpdateStatusIns
OBJECT-TYPE
Number of Update Status messages received.
1.3.6.1.4.1.9.9.49.1.1.1.1.7Counter32read-onlycurrent
cfrLmiUpdateStatusOuts
OBJECT-TYPE
Number of Update Status messages sent
1.3.6.1.4.1.9.9.49.1.1.1.1.8Counter32read-onlycurrent
cfrLmiStatusTimeouts
OBJECT-TYPE
Number of times when timeout occurred on waiting for Status message
1.3.6.1.4.1.9.9.49.1.1.1.1.9Counter32read-onlycurrent
cfrLmiStatusEnqTimeouts
OBJECT-TYPE
Number of times when timeout occurred on waiting for Status Enquiry message
1.3.6.1.4.1.9.9.49.1.1.1.1.10Counter32read-onlycurrent
cfrLmiN392Dce
OBJECT-TYPE
LMI error threshold for DCE interface. For DTE, value becomes 0.
1.3.6.1.4.1.9.9.49.1.1.1.1.11INTEGER (0..10)read-onlycurrent
cfrLmiN393Dce
OBJECT-TYPE
LMI monitored event count for DCE interface. For DTE, value becomes zero (0).
1.3.6.1.4.1.9.9.49.1.1.1.1.12INTEGER (0..10)read-onlycurrent
cfrLmiT392Dce
OBJECT-TYPE
DCE polling verification timer for DCE interface For DTE, the value becomes zero (0).
1.3.6.1.4.1.9.9.49.1.1.1.1.13INTEGER (0..30)read-onlycurrent
cfrCircuitObjs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.1.2
cfrCircuitTable
OBJECT-TYPE
Table of descriptive and statistics information that are generic to Frame Relay virtual circuits.
1.3.6.1.4.1.9.9.49.1.2.1not-accessiblecurrent
cfrCircuitEntry
OBJECT-TYPE
Each entry of the table contains information of a circuit that are not included in frCircuitTable of RFC1315 but are generic to Frame Relay.
1.3.6.1.4.1.9.9.49.1.2.1.1not-accessiblecurrent
cfrCircuitDEins
OBJECT-TYPE
Number of packets received with the Discarded Eligibility indictor (the DE bit) set.
1.3.6.1.4.1.9.9.49.1.2.1.1.1Counter32read-onlycurrent
cfrCircuitDEouts
OBJECT-TYPE
Number of packets transmitted with DE bit set.
1.3.6.1.4.1.9.9.49.1.2.1.1.2Counter32read-onlycurrent
cfrCircuitDropPktsOuts
OBJECT-TYPE
Number of discarded packets that were to be sent.
1.3.6.1.4.1.9.9.49.1.2.1.1.3Counter32read-onlycurrent
cfrCircuitType
OBJECT-TYPE
Basic circuit type
1.3.6.1.4.1.9.9.49.1.2.1.1.4INTEGER {pvc(1), svc(2)}read-onlycurrent
cfrExtCircuitTable
OBJECT-TYPE
Table of Cisco implementation specific FR circuit information. This is a Cisco extension for the frCircuitTable of RFC 1315.
1.3.6.1.4.1.9.9.49.1.2.2not-accessiblecurrent
cfrExtCircuitEntry
OBJECT-TYPE
Each entry of the table contains information of a Frame Relay virtual circuit that are specific to Cisco implementation.
1.3.6.1.4.1.9.9.49.1.2.2.1not-accessiblecurrent
cfrExtCircuitIfName
OBJECT-TYPE
The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an interface used in the configuration and all console displays, such as 'serial 0', 'serial 3/0.3', etc.
1.3.6.1.4.1.9.9.49.1.2.2.1.1DisplayStringread-onlycurrent
cfrExtCircuitIfType
OBJECT-TYPE
Type of the subinterface this DLCI is associated with, if configured.
1.3.6.1.4.1.9.9.49.1.2.2.1.2INTEGER {mainInterface(1), pointToPoint(2), multipoint(3)}read-onlycurrent
cfrExtCircuitSubifIndex
OBJECT-TYPE
For value greater than zero (0), it indicates the network management interface index for the subinterface associated with this DLCI. Value 0 means the DLCI is not associated with any subinterface.
1.3.6.1.4.1.9.9.49.1.2.2.1.3InterfaceIndexread-onlycurrent
cfrExtCircuitMapStatus
OBJECT-TYPE
The mapping protocols (internally considered as the 'link type') applied on this circuit. The value ranges from 0 to 2047. For point-to-point DLCI, the value stays zero. Otherwise, the value is a sum. It initially takes the value zero, then, for each type of Protocol, 2 raised to a power is added to the sum. The following table presents respective power and equivalent value for each applicable type: Protocol Power Value -------- ----- ----- IP 0 1 IPX 1 2 Appletalk 2 4 XNS 3 8 VINES 4 16 DECnet 5 32 CLNS 6 64 Bridging 7 128 RSRB 8 256 STUN 9 512 LLC2 10 1024 For example, value 3 means the circuit's mapping protocols include IP and IPX. (3 = 2**1 + 2**0, where 0 corresponds to IP and 1 to IPX.) Value 0 means there is currently no mapping protocol for the circuit. See cfrMapTable for more mapping information.
1.3.6.1.4.1.9.9.49.1.2.2.1.4INTEGER (0..2047)read-onlycurrent
cfrExtCircuitCreateType
OBJECT-TYPE
Identify the last source of the circuit's creation.
1.3.6.1.4.1.9.9.49.1.2.2.1.5INTEGER {dynamic(1), static(2)}read-onlycurrent
cfrExtCircuitMulticast
OBJECT-TYPE
Indicate if this DLCI is a multicast DLCI.
1.3.6.1.4.1.9.9.49.1.2.2.1.6TruthValueread-onlycurrent
cfrExtCircuitRoutedDlci
OBJECT-TYPE
The routed DLCI to pair up with this DLCI for switching function. NOTE: Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI.
1.3.6.1.4.1.9.9.49.1.2.2.1.7DlciNumberread-onlycurrent
cfrExtCircuitRoutedIf
OBJECT-TYPE
The interface for the routed DLCI that pairs up with this DLCI for switching. Value greater than 0 is the InterfaceIndex for that interface. Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI.
1.3.6.1.4.1.9.9.49.1.2.2.1.8InterfaceIndexread-onlycurrent
cfrExtCircuitUncompressIns
OBJECT-TYPE
Number of inbound octets of the data packets, accounted at Frame Relay level after FRF.9 payload decompression is applied. In the case of non-FRF.9, this value could be identical to frCircuitReceivedOctets, unless otherwise noted.
1.3.6.1.4.1.9.9.49.1.2.2.1.9Counter32read-onlycurrent
cfrExtCircuitUncompressOuts
OBJECT-TYPE
Number of outbound octets of the data packets, accounted at Frame Relay level before FRF.9 payload compression is applied. In the case of non-FRF.9, this value could be identical to frCircuitSentOctets, unless otherwise noted.
1.3.6.1.4.1.9.9.49.1.2.2.1.10Counter32read-onlycurrent
cfrExtCircuitFECNOuts
OBJECT-TYPE
Total number of frames sent out to the network indicating forward congestion.
1.3.6.1.4.1.9.9.49.1.2.2.1.11Counter32read-onlycurrent
cfrExtCircuitBECNOuts
OBJECT-TYPE
Total number of frames sent out to the network indicating backward congestion.
1.3.6.1.4.1.9.9.49.1.2.2.1.12Counter32read-onlycurrent
cfrExtCircuitMinThruputOut
OBJECT-TYPE
Circuit's outgoing minimal Throughput based on configuration.
1.3.6.1.4.1.9.9.49.1.2.2.1.13Integer32 (9600..1544000)read-onlycurrent
cfrExtCircuitMinThruputIn
OBJECT-TYPE
Circuit's incoming minimal Throughput based on configuration.
1.3.6.1.4.1.9.9.49.1.2.2.1.14Integer32 (9600..1544000)read-onlycurrent
cfrExtCircuitBcastPktOuts
OBJECT-TYPE
Total number of broadcast packets sent out to the network.
1.3.6.1.4.1.9.9.49.1.2.2.1.15Counter32read-onlycurrent
cfrExtCircuitBcastByteOuts
OBJECT-TYPE
Total number of bytes sent out to the network in broadcast packets.
1.3.6.1.4.1.9.9.49.1.2.2.1.16Counter32read-onlycurrent
cfrExtCircuitBandwidth
OBJECT-TYPE
Bandwidth of the virtual circuit, acquired from Cisco typed LMI Full Status message.
1.3.6.1.4.1.9.9.49.1.2.2.1.17Integer32 (0..16777215)read-onlycurrent
cfrExtCircuitShapeByteLimit
OBJECT-TYPE
Maximum number of tokens a token bucket can hold in any time interval in case of traffic shaping.
1.3.6.1.4.1.9.9.49.1.2.2.1.18Integer32 (125..2147483647)read-onlycurrent
cfrExtCircuitShapeInterval
OBJECT-TYPE
Committed rate measurement interval.
1.3.6.1.4.1.9.9.49.1.2.2.1.19Integer32 (10..125)read-onlycurrent
cfrExtCircuitShapeByteIncrement
OBJECT-TYPE
Number of tokens added into the token bucket per time interval in case of traffic shaping.
1.3.6.1.4.1.9.9.49.1.2.2.1.20Integer32 (125..2147483647)read-onlycurrent
cfrExtCircuitShapePkts
OBJECT-TYPE
Total number of packets that went through traffic shaping.
1.3.6.1.4.1.9.9.49.1.2.2.1.21Counter32read-onlycurrent
cfrExtCircuitShapeBytes
OBJECT-TYPE
Total number of bytes that went through traffic shaping.
1.3.6.1.4.1.9.9.49.1.2.2.1.22Counter32read-onlycurrent
cfrExtCircuitShapePktsDelay
OBJECT-TYPE
Total number of packets that were delayed by the traffic shaper.
1.3.6.1.4.1.9.9.49.1.2.2.1.23Counter32read-onlycurrent
cfrExtCircuitShapeBytesDelay
OBJECT-TYPE
Total number of bytes that were delayed by the traffic shaper.
1.3.6.1.4.1.9.9.49.1.2.2.1.24Counter32read-onlycurrent
cfrExtCircuitShapeActive
OBJECT-TYPE
Shows whether shaping is active or not.
1.3.6.1.4.1.9.9.49.1.2.2.1.25TruthValueread-onlycurrent
cfrExtCircuitShapeAdapting
OBJECT-TYPE
Type of Adaptive Shaping configured. none(1) - No adaptive shaping configured becn(2) - Backward Explicit Congestion Notification foreSight(3) - ForeSight is the network traffic control software used in Cisco WAN switches
1.3.6.1.4.1.9.9.49.1.2.2.1.26INTEGER {none(1), becn(2), foreSight(3)}read-onlycurrent
cfrExtCircuitTxDataRate
OBJECT-TYPE
The average rate (bytes/second) at which data is transmitted in this circuit.
1.3.6.1.4.1.9.9.49.1.2.2.1.27INTEGER (1..45000000)read-onlycurrent
cfrExtCircuitTxPktRate
OBJECT-TYPE
The average number of packets sent in a second in this circuit.
1.3.6.1.4.1.9.9.49.1.2.2.1.28INTEGER (1..45000000)read-onlycurrent
cfrExtCircuitRcvDataRate
OBJECT-TYPE
The average rate (bytes/second) at which data is received in this circuit.
1.3.6.1.4.1.9.9.49.1.2.2.1.29INTEGER (1..45000000)read-onlycurrent
cfrExtCircuitRcvPktRate
OBJECT-TYPE
The average number of packets received in a second in this circuit.
1.3.6.1.4.1.9.9.49.1.2.2.1.30INTEGER (1..45000000)read-onlycurrent
cfrMapObjs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.1.3
cfrMapTable
OBJECT-TYPE
Table of protocols and addresses mapping information of FR virtual circuit.
1.3.6.1.4.1.9.9.49.1.3.1not-accessiblecurrent
cfrMapEntry
OBJECT-TYPE
Each entry of the table contains one mapping information of a Frame Relay virtual circuit.
1.3.6.1.4.1.9.9.49.1.3.1.1not-accessiblecurrent
cfrMapIndex
OBJECT-TYPE
An arbitrary Index to the mapping information associated with a certain circuit. The maximum value is arbitrarily picked which is considered sufficient for usual configuration.
1.3.6.1.4.1.9.9.49.1.3.1.1.1INTEGER (1..999)read-onlycurrent
cfrMapProtocol
OBJECT-TYPE
Mapping protocol for this circuit.
1.3.6.1.4.1.9.9.49.1.3.1.1.2CfrMapProtocolsread-onlycurrent
cfrMapAddress
OBJECT-TYPE
Mapping protocol address at remote end for this DLCI. NOTE: For point-to-point DLCI, the string is fixed to be point-to-point.
1.3.6.1.4.1.9.9.49.1.3.1.1.3OCTET STRING (SIZE(0..64))read-onlycurrent
cfrMapType
OBJECT-TYPE
Type for the map creation.
1.3.6.1.4.1.9.9.49.1.3.1.1.4INTEGER {static(1), dynamic(2), svc(3)}read-onlycurrent
cfrMapEncaps
OBJECT-TYPE
Indication of the encapsulation type for this mapping protocol.
1.3.6.1.4.1.9.9.49.1.3.1.1.5INTEGER {ietf(1), cisco(2)}read-onlycurrent
cfrMapBroadcast
OBJECT-TYPE
Broadcast enabled or disabled.
1.3.6.1.4.1.9.9.49.1.3.1.1.6TruthValueread-onlycurrent
cfrMapPayloadCompress
OBJECT-TYPE
Indicate if payload compression is enabled.
1.3.6.1.4.1.9.9.49.1.3.1.1.7TruthValueread-onlydeprecated
cfrMapTcpHdrCompress
OBJECT-TYPE
TCP header compression type, if applicable.
1.3.6.1.4.1.9.9.49.1.3.1.1.8INTEGER {inapplicable(1), passive(2), active(3)}read-onlycurrent
cfrMapRtpHdrCompress
OBJECT-TYPE
RTP header compression type, if applicable. The value 'passive' means that the header of an outgoing RTP/IP packet is compressed only if an incoming RTP/IP packet had a compressed header. The value 'active' means the header of every outgoing RTP/IP packet is compressed.
1.3.6.1.4.1.9.9.49.1.3.1.1.9INTEGER {inapplicable(1), passive(2), active(3)}read-onlycurrent
cfrMapPayloadCompressType
OBJECT-TYPE
FR payload compression type, if applicable. FRF.9 is the Frame Relay Forum Implementation Agreement on FR payload compression. The compression can be done by either software or hardware (when equipped with the supporting hardware), depending on configuration.
1.3.6.1.4.1.9.9.49.1.3.1.1.10INTEGER {inapplicable(1), cisco(2), frf9Software(3), frf9Hardware(4)}read-onlycurrent
cfrSvcObjs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.1.4
cfrSvcTable
OBJECT-TYPE
Table of FR SVC specific, descriptive and statistics information.
1.3.6.1.4.1.9.9.49.1.4.1not-accessiblecurrent
cfrSvcEntry
OBJECT-TYPE
Each entry of the table contains circuit information specific to a Frame Relay Switched Virtual Circuit.
1.3.6.1.4.1.9.9.49.1.4.1.1not-accessiblecurrent
cfrSvcAddrLocal
OBJECT-TYPE
Local E.164/X.125 address for the circuit.
1.3.6.1.4.1.9.9.49.1.4.1.1.1OCTET STRING (SIZE(0..64))read-onlycurrent
cfrSvcAddrRemote
OBJECT-TYPE
Remote E.164/X.125 address for the circuit.
1.3.6.1.4.1.9.9.49.1.4.1.1.2OCTET STRING (SIZE(0..64))read-onlycurrent
cfrSvcThroughputIn
OBJECT-TYPE
Circuit's incoming throughput. For outgoing throughput (commonly referred to as CIR) see frCircuitThroughput per RFC1315.
1.3.6.1.4.1.9.9.49.1.4.1.1.3Integer32 (9600..1544000)read-onlycurrent
cfrSvcMinThruputOut
OBJECT-TYPE
Circuit's outgoing minimal Throughput.
1.3.6.1.4.1.9.9.49.1.4.1.1.4Integer32 (9600..1544000)read-onlydeprecated
cfrSvcMinThruputIn
OBJECT-TYPE
Circuit's incoming minimal Throughput.
1.3.6.1.4.1.9.9.49.1.4.1.1.5Integer32 (9600..1544000)read-onlydeprecated
cfrSvcCommitBurstIn
OBJECT-TYPE
Circuit's incoming Committed Burst Rate. See ANSI and/or ITU specifications for definition and calculations. For outgoing CBR, see frCircuitCommittedBurst per RFC 1315.
1.3.6.1.4.1.9.9.49.1.4.1.1.6Integer32 (9600..1544000)read-onlycurrent
cfrSvcExcessBurstIn
OBJECT-TYPE
Circuit's incoming Excess Burst Rate. See ANSI and/or ITU specifications for definition and calculations. For outgoing EBR, see frCircuitExcessBurst per RFC 1315.
1.3.6.1.4.1.9.9.49.1.4.1.1.7Integer32 (9600..2440000)read-onlycurrent
cfrSvcIdleTime
OBJECT-TYPE
Circuit's idle time period. If expires, the circuit is cleared.
1.3.6.1.4.1.9.9.49.1.4.1.1.8Integer32read-onlycurrent
cfrElmiObjs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.1.5
cfrElmiIpAddr
OBJECT-TYPE
This object represents the Management address of the device used for address registration. Network management station can send management messages to this IP address. This can be user configured address or the address of one of the interfaces on the device. If address registration is disabled then this will have a value of 0.0.0.0. This object is accessible only if the ELMI protocol is supported on the device
1.3.6.1.4.1.9.9.49.1.5.1IpAddressread-onlycurrent
cfrElmiTable
OBJECT-TYPE
Table of CISCO Frame Relay ELMI information that is specific to CISCO implementation
1.3.6.1.4.1.9.9.49.1.5.2not-accessiblecurrent
cfrElmiEntry
OBJECT-TYPE
Each entry of the table contains information about a physical interface. The table can be accessible only if the device supports ELMI protocol and if LMI is enabled on the interface.
1.3.6.1.4.1.9.9.49.1.5.2.1not-accessiblecurrent
cfrElmiLinkStatus
OBJECT-TYPE
This variable states whether Enhanced Link Management Interface(ELMI) protocol is enabled or not on a frame relay interface.
1.3.6.1.4.1.9.9.49.1.5.2.1.1INTEGER {enabled(1), disabled(2)}read-onlycurrent
cfrElmiArStatus
OBJECT-TYPE
This variable states whether the Enhanced Link Management Interface(ELMI) address registration(AR) mechanism is enabled or not on a frame relay interface. A value of 1 indicates ELMI AR is supported on the interface. A value of 2 indicates ELMI AR is supported but the user disabled the exchange of IP address and ifIndex with the neighboring device. This object doesn't have any significance if cfrElmiLinkStatus is disabled on the interface.
1.3.6.1.4.1.9.9.49.1.5.2.1.2INTEGER {enabled(1), disabled(2)}read-onlycurrent
cfrElmiRemoteStatus
OBJECT-TYPE
This variable states the Enhanced Link Management(ELMI) status on the other end of the interface. If cfrElmiLinkStatus is enabled on the other end a value of 1 will be returned, else 2 will be returned. This object doesn't have any significance if cfrElmiLinkStatus is disabled on the interface
1.3.6.1.4.1.9.9.49.1.5.2.1.3INTEGER {enabled(1), disabled(2)}read-onlycurrent
cfrElmiNeighborTable
OBJECT-TYPE
Table of CISCO Frame Relay Neighbor ELMI information that is specific to CISCO implementation.
1.3.6.1.4.1.9.9.49.1.5.3not-accessiblecurrent
cfrElmiNeighborEntry
OBJECT-TYPE
Each entry of the table contains information of the neighboring device connected to a physical interface. The entry will be present only if ELMI is enabled on the neighboring device interface. If the value of the cfrElmiRemoteStatus in the cfrElmiEntry is 1 then a valid entry exists for the interface. If ELMI is not supported on the remote end then, the neighbor information for the interface will not be present
1.3.6.1.4.1.9.9.49.1.5.3.1not-accessiblecurrent
cfrElmiNeighborArStatus
OBJECT-TYPE
This variable indicates the status of ELMI Address registration(AR) on the neighboring device. A value of 1 indicates ELMI AR is not supported on the neighboring device. A value of 2 indicates ELMI AR is enabled on the interface. A value of 3 indicates AR is supported, but user disabled the exchange of IP address and ifIndex with the neighbor.
1.3.6.1.4.1.9.9.49.1.5.3.1.1INTEGER {notsupported(1), enabled(2), disabled(3)}read-onlycurrent
cfrElmiNeighborIpAddress
OBJECT-TYPE
The Management IP address of the neighboring device to which the other end of this interface is connected. Network management system can use this address to send management messages to the device. If address registration is not supported on the remote end then the value will be 0.0.0.0. NMS uses this object in the topology discovery of the network.
1.3.6.1.4.1.9.9.49.1.5.3.1.2IpAddressread-onlycurrent
cfrElmiNeighborIfIndex
OBJECT-TYPE
The Interface index of the neighboring device to which this interface is connected. If the value of cfrElmiNeighborArStatus is 2 then this will have a valid value. If the value of cfrElmiNeighborArStatus is 3 or 1 then value of this object will be 0. NMS uses this object in the topology discovery of the network.
1.3.6.1.4.1.9.9.49.1.5.3.1.3InterfaceIndexread-onlycurrent
cfrElmiNeighborVendorName
OBJECT-TYPE
Vendor name of the neighboring device to which the other end of this interface is connected.
1.3.6.1.4.1.9.9.49.1.5.3.1.4DisplayStringread-onlycurrent
cfrElmiNeighborPlatformName
OBJECT-TYPE
Platform name of the neighboring device to which the other end of this interface is connected.
1.3.6.1.4.1.9.9.49.1.5.3.1.5DisplayStringread-onlycurrent
cfrElmiNeighborDeviceName
OBJECT-TYPE
Device name of the neighboring device to which the other end of this interface is connected.
1.3.6.1.4.1.9.9.49.1.5.3.1.6DisplayStringread-onlycurrent
cfrFragObjs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.1.6
cfrFragTable
OBJECT-TYPE
Table of Frame Relay Fragmentation information. These are specific to Cisco's implementation.
1.3.6.1.4.1.9.9.49.1.6.1not-accessiblecurrent
cfrFragEntry
OBJECT-TYPE
Each entry of the table contains details of fragmentation configured on this circuit.
1.3.6.1.4.1.9.9.49.1.6.1.1not-accessiblecurrent
cfrFragSize
OBJECT-TYPE
cfrFragSize defines the payload size of a fragment and it excludes the FR headers and any FR fragmentation header.
1.3.6.1.4.1.9.9.49.1.6.1.1.1INTEGER (16..1600)read-onlycurrent
cfrFragType
OBJECT-TYPE
Fragmentation type configured by the user. The types supported are end-to-end, VoFR-cisco and VoFR.
1.3.6.1.4.1.9.9.49.1.6.1.1.2DisplayStringread-onlycurrent
cfrFragInPkts
OBJECT-TYPE
Total number of frames received that have a fragmentation header.
1.3.6.1.4.1.9.9.49.1.6.1.1.3Counter32read-onlycurrent
cfrFragOutPkts
OBJECT-TYPE
Total number of fragments that are transmitted with a fragmenation header.
1.3.6.1.4.1.9.9.49.1.6.1.1.4Counter32read-onlycurrent
cfrFragInOctets
OBJECT-TYPE
Total number of bytes received in frames that have a fragmentation header. The number of bytes include the FR header.
1.3.6.1.4.1.9.9.49.1.6.1.1.5Counter32read-onlycurrent
cfrFragOutOctets
OBJECT-TYPE
Total number of bytes that are transmitted in frames with a fragmenation header. The number of bytes also includes the FR header.
1.3.6.1.4.1.9.9.49.1.6.1.1.6Counter32read-onlycurrent
cfrFragNotInPkts
OBJECT-TYPE
Total number of frames received that do not require reassembly and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.
1.3.6.1.4.1.9.9.49.1.6.1.1.7Counter32read-onlycurrent
cfrFragNotOutPkts
OBJECT-TYPE
Total number of frames transmitted without fragmenting and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.
1.3.6.1.4.1.9.9.49.1.6.1.1.8Counter32read-onlycurrent
cfrFragNotInOctets
OBJECT-TYPE
Total number of bytes received in frames that do not require reassembly and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.
1.3.6.1.4.1.9.9.49.1.6.1.1.9Counter32read-onlycurrent
cfrFragNotOutOctets
OBJECT-TYPE
Total number of bytes transmitted in frames that are not fragmented and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.
1.3.6.1.4.1.9.9.49.1.6.1.1.10Counter32read-onlycurrent
cfrFragAssembledInPkts
OBJECT-TYPE
Total number of fully reassembled frames. It also counts the number of packets received without FR fragmentation header (i.e. in un-fragmentated pkts).
1.3.6.1.4.1.9.9.49.1.6.1.1.11Counter32read-onlycurrent
cfrFragAssembledInOctets
OBJECT-TYPE
Total number of bytes received in fully reassembled frames. It also counts the number of packets received without FR fragmentation header (i.e.in un-fragmentated pkts).
1.3.6.1.4.1.9.9.49.1.6.1.1.12Counter32read-onlycurrent
cfrFragPreOutPkts
OBJECT-TYPE
Total number of frames fragmented and trasmitted. It also counts the number of packets trasmitted without FR fragmentation header (i.e. in un-fragmentated pkts).
1.3.6.1.4.1.9.9.49.1.6.1.1.13Counter32read-onlycurrent
cfrFragPreOutOctets
OBJECT-TYPE
Total number of bytes transmitted in fragmented frames. It also counts the number of bytes trasmitted in frames without FR fragmentation header (i.e. in un-fragmentated pkts).
1.3.6.1.4.1.9.9.49.1.6.1.1.14Counter32read-onlycurrent
cfrFragDroppedReAssembledInPkts
OBJECT-TYPE
Number of received fragments dropped for reasons such as : running out of memory, receiving segments out of sequence, receiving an unexpected frame with a B bit set, timing out on a reassembling frame.
1.3.6.1.4.1.9.9.49.1.6.1.1.15Counter32read-onlycurrent
cfrFragDroppedFragmentedOutPkts
OBJECT-TYPE
Number of fragments dropped because of running out of memory.
1.3.6.1.4.1.9.9.49.1.6.1.1.16Counter32read-onlycurrent
cfrFragTimeoutsIn
OBJECT-TYPE
Number of reassemble timer timeouts for this circuit. A frame requiring more than two minutes to fully reassemble is dropped and timeout will be incremented by one.
1.3.6.1.4.1.9.9.49.1.6.1.1.17INTEGER (0..1000)read-onlycurrent
cfrFragOutOfSeqFragPkts
OBJECT-TYPE
Indicates the total number of packets received with an unexpected sequence number. All fragments being reassembled are dropped. Start a new packet with the received segment only if the B bit is set on the segment. Otherwise the new segment is also dropped.
1.3.6.1.4.1.9.9.49.1.6.1.1.18Counter32read-onlycurrent
cfrFragUnexpectedBBitSetPkts
OBJECT-TYPE
Number of fragments received in this circuit with a B bit set. All fragments being reassembled are dropped and a new packet is started with this segment.
1.3.6.1.4.1.9.9.49.1.6.1.1.19Counter32read-onlycurrent
cfrFragSeqMissedPkts
OBJECT-TYPE
Number of fragments received in this circuit with skipped sequence number.
1.3.6.1.4.1.9.9.49.1.6.1.1.20Counter32read-onlycurrent
cfrFragInterleavedOutPkts
OBJECT-TYPE
Number of packets that have been interleaved between segments.
1.3.6.1.4.1.9.9.49.1.6.1.1.21Counter32read-onlycurrent
cfrConnectionObjs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.1.7
cfrConnectionTable
OBJECT-TYPE
Table of Frame Relay/Frame Relay and Frame Relay/ATM Network/Service Interworking connection information. These are specific to Cisco's implementation.
1.3.6.1.4.1.9.9.49.1.7.1not-accessiblecurrent
cfrConnectionEntry
OBJECT-TYPE
Each entry of the table contains information of a connection that is established for Frame Relay/Frame Relay and Frame Relay/ATM Network/Service Interworking.
1.3.6.1.4.1.9.9.49.1.7.1.1not-accessiblecurrent
cfrConnName
OBJECT-TYPE
The textual name of a for FR/FR or FR/ATM Network/Service Interworking connection.
1.3.6.1.4.1.9.9.49.1.7.1.1.1DisplayStringread-onlycurrent
cfrConnID
OBJECT-TYPE
The numerical identifier of a FR/FR or FR/ATM Network/Service Interworking connection.
1.3.6.1.4.1.9.9.49.1.7.1.1.2INTEGER (1..2000)read-onlycurrent
cfrConnState
OBJECT-TYPE
Status of a FR/FR or FR/ATM Network/Service Interworking connection.
1.3.6.1.4.1.9.9.49.1.7.1.1.3DisplayStringread-onlycurrent
cfrConnSegment1Name
OBJECT-TYPE
The textual name used to identify the first segment of a FR/FR or FR/ATM Network/Service Interworking connection.
1.3.6.1.4.1.9.9.49.1.7.1.1.4DisplayStringread-onlycurrent
cfrConnSegment1VCGroup
OBJECT-TYPE
The textual name used to identify the VC-Group in the first segment of a Frame Relay/ATM Network Interworking (FRF.5)connection. This field is not applicabe in case of, FRF.8 (Frame Relay/ATM Service Interworking) and FR-FR connectione.
1.3.6.1.4.1.9.9.49.1.7.1.1.5DisplayStringread-onlycurrent
cfrConnSegment1Dlci
OBJECT-TYPE
The DLCI used as the first segment of a FR-FR or FR-ATM Network/Service Interworking connection.
1.3.6.1.4.1.9.9.49.1.7.1.1.6DlciNumberread-onlycurrent
cfrConnSegment2Name
OBJECT-TYPE
The interface on which second segment of a FR-FR or FR-ATM Network/Service Interworking connection is configured.
1.3.6.1.4.1.9.9.49.1.7.1.1.7DisplayStringread-onlycurrent
cfrConnSegment2Vpi
OBJECT-TYPE
The value of VPI, in the ATM connection, used as the second segment of a FR-ATM Network/Service Interworking connection. In case of FR-FR connection, the same will be used to display the DLCI used as the second segment.
1.3.6.1.4.1.9.9.49.1.7.1.1.8INTEGER (0..4095)read-onlycurrent
cfrConnSegment2Vci
OBJECT-TYPE
The value of VCI, in the ATM connection, used as the second segment of a FR-ATM Network/Service Interworking connection. In case of FR-FR connection, this is not supported.
1.3.6.1.4.1.9.9.49.1.7.1.1.9INTEGER (0..4095)read-onlycurrent
cfrConnServiceTranslation
OBJECT-TYPE
Shows whether Service Translation Mode is supported or not. Translation Mode is the interworking of internetworking (routed and/or bridged) protocols used in FR-ATM Service PVC Interworking(FRF.8). This is not supported in case of FRF.5 (FR-ATM network Interworking) and FR-FR connections.
1.3.6.1.4.1.9.9.49.1.7.1.1.10INTEGER {serviceTranslationEnabled(1), serviceTranslationNotEnabled(2)}read-onlycurrent
cfrConnFrSscsDlci
OBJECT-TYPE
The DLCI value used at the FR-SSCS layer. This is one of connection multiplexing methods used in Frame Relay/ATM Network Interworking. Not supported in case of FRF.8 (FR-ATM Service PVC Interworking) and FR-FR connections
1.3.6.1.4.1.9.9.49.1.7.1.1.11DlciNumberread-onlycurrent
cfrConnEfciBit
OBJECT-TYPE
Shows whether the FECN field in the FR frame is mapped to the ATM EFCI field of every cell generated out of the FR frame. This is used to indicate congestion in FR to ATM direction in case of Frame Relay/ATM Service PVC Interworking. Not supported in FRF.5 (Frame Relay/ATM Network Interworking and FR-FR connections.
1.3.6.1.4.1.9.9.49.1.7.1.1.12INTEGER {mapFecn(1), notMapFecn(2)}read-onlycurrent
cfrConnDeBit
OBJECT-TYPE
The method of operation for loss priority mapping in the B-ISDN to FR direction.. Not supported in case of FR-FR connection.
1.3.6.1.4.1.9.9.49.1.7.1.1.13INTEGER {noMapClp(1), mapClp(2), setDe0(3), setDe1(4)}read-onlycurrent
cfrConnClpBit
OBJECT-TYPE
The method of operation used to map loss priority mapping in the FR to ATM direction. Not supported in case of FR-FR connection.
1.3.6.1.4.1.9.9.49.1.7.1.1.14INTEGER {setClpTo0AndCopyDeToFrsscsDe(1), setClpTo1AndCopyDeToFrsscsDe(2), copyDeToFrsscsDeAndClp(3), copyDeToClp(4), setClp1(5), setClp0(6)}read-onlycurrent
ciscoFrMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.3
ciscoFrMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.3.1
ciscoFrMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.49.3.2

Conformance

NameOIDStatus
ciscoFrMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement this Cisco Frame Relay MIB.
1.3.6.1.4.1.9.9.49.3.1.1obsolete
ciscoFrMIBCompliancesRev1
MODULE-COMPLIANCE
The compliance statement for entities which implement this Cisco Frame Relay MIB.
1.3.6.1.4.1.9.9.49.3.1.2obsolete
ciscoFrMIBCompliancesRev2
MODULE-COMPLIANCE
The compliance statement for entities which implement this Cisco Frame Relay MIB.
1.3.6.1.4.1.9.9.49.3.1.3obsolete
ciscoFrMIBCompliancesRev3
MODULE-COMPLIANCE
The compliance statement for entities which implement this Cisco Frame Relay MIB.
1.3.6.1.4.1.9.9.49.3.1.4deprecated
ciscoFrMIBCompliancesRev4
MODULE-COMPLIANCE
The compliance statement for entities which implement this Cisco Frame Relay MIB.
1.3.6.1.4.1.9.9.49.3.1.5current
ciscoFrMIBGroup
OBJECT-GROUP
The compliance statement for entities which implement this Cisco Frame Relay MIB.
1.3.6.1.4.1.9.9.49.3.2.1deprecated
ciscoFrMIBGroupRev1
OBJECT-GROUP
A collection of objects providing router's Frame Relay configuration and statistics information that are additional to the IETF standard Frame Relay DTE MIB.
1.3.6.1.4.1.9.9.49.3.2.2deprecated
ciscoFrLmiMIBGroup
OBJECT-GROUP
A collection of objects providing router's Frame Relay LMI configuration and statistics information either supplemental to the frDlcmiTable of RFC 1315 or specific to Cisco's implementation.
1.3.6.1.4.1.9.9.49.3.2.3current
ciscoFrCircuitMIBGroup
OBJECT-GROUP
A collection of objects providing information of a circuit that are not included in frCircuitTable of RFC1315 but are generic to Frame Relay.
1.3.6.1.4.1.9.9.49.3.2.4current
ciscoExtCircuitMIBGroup
OBJECT-GROUP
A collection of objects that provide Cisco implementation specific FR circuit information. This is a Cisco extension for the frCircuitTable of RFC 1315.
1.3.6.1.4.1.9.9.49.3.2.5deprecated
ciscoFrTsMIBGroup
OBJECT-GROUP
A collection of objects that provide information about Frame Relay Traffic Shaping. These are additional to the IETF standard Frame Relay DTE MIB.
1.3.6.1.4.1.9.9.49.3.2.6current
ciscoFrMapMIBGroup
OBJECT-GROUP
A collection of objects to provide mapping information of a Frame Relay virtual circuit. These are additional to the IETF standard Frame Relay DTE MIB.
1.3.6.1.4.1.9.9.49.3.2.7current
ciscoFrSvcMIBGroup
OBJECT-GROUP
A collection of objects to provide circuit information specific to a Frame Relay Switched Virtual Circuit.This is in addition to the IETF standard Frame Relay DTE MIB.
1.3.6.1.4.1.9.9.49.3.2.8current
ciscoFrElmiMIBGroup
OBJECT-GROUP
A collection of objects providing router's ELMI information.
1.3.6.1.4.1.9.9.49.3.2.9deprecated
ciscoFrElmiMIBGroup1
OBJECT-GROUP
A collection of objects providing router's ELMI information.
1.3.6.1.4.1.9.9.49.3.2.10current
ciscoFrFragMIBGroup
OBJECT-GROUP
A collection of objects providing router's fragmentation information.
1.3.6.1.4.1.9.9.49.3.2.11current
ciscoFrConnMIBGroup
OBJECT-GROUP
A collection of objects providing router's fragmentation information.
1.3.6.1.4.1.9.9.49.3.2.12current
ciscoExtCircuitMIBGroup1
OBJECT-GROUP
A collection of objects that provide Cisco implementation specific FR circuit information. This is a Cisco extension for the frCircuitTable of RFC 1315.
1.3.6.1.4.1.9.9.49.3.2.13current