CISCO-FIREWALL-MIB
- Registered at
- 1.3.6.1.4.1.9.9.147
- Last updated
- 2020-10-01 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2020-10-01 00:00, 2005-12-06 00:00, 1999-04-29 12:00
- Namespace
- cisco
- Source file
CISCO-FIREWALL-MIB- Digest
sha256:183044e3aad38c4f528babe91e4fcda8e6116648ddbe947b38084e3a40848db8
Description
MIB module for monitoring Cisco Firewalls.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-pix@cisco.com cs-iosfw@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| IF-MIB | InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowPointer, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-FIREWALL-MIB CISCO-SMI IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AccessEvent TEXTUAL-CONVENTION This textual convention is used to describe various events and statistics that are related to the access control on a firewall. other : Miscellaneous access event. grant : A service has allowed access based on all of its access checks. deny : a client was denied use of a service. denyMult : A client was denied use of a service multiple times. error : An error has ocurred during the access control process. | current | |||
| AuthenticationEvent TEXTUAL-CONVENTION This textual convention is used to describe various events and statistics that are related to authorization. other : Miscellaneous authentication event. succ : A client successfuly authenticated. error : Error while authenticating. fail : A client failed an authenticating. succPriv : A client accessed a service with special privileges. failPriv : A client failed to access a service with special privileges. failMult : Multiple failed authentication attempts by a client. | current | |||
| ConnectionEvent TEXTUAL-CONVENTION This textual convention is used to describe various events and statistics that are related to the connections that occur on a firewall. other : A generic connection event. accept : A connection has been acccepted. error : An error has occurred for a connection. drop : The connection has been dropped. close : A connection has been closed. timeout : A connection has been timed out. refused : A connection has been refused. reset : A connection has been reset. noResp : A connection has received no response. | current | |||
| ConnectionStat TEXTUAL-CONVENTION This textual convention is used to describe various connections statistics. other : A generic connection event. totalOpen : Total open connections since reboot. currentOpen : The number of connections currently open. currentClosing : The number of connections currently closing. currentHalfOpen : The number of connections currently half-open. currentInUse : The number of connections currently in use. high : The highest number of connections in use at any one time since system startup. | current | |||
| ContentInspectionEvent TEXTUAL-CONVENTION Content inspection events, these events report that something was found in the application payload. The details entry in the event can report on what was found (eg., virus, company private info., etc), what it was found in (eg., html, win32 executable, e-mail), and what was done with it (eg., the quarantine location). other : A content inspection event. Used to indicate that some content inspection has occurred that is not covered by the other content inspection enumerations. okay : The check of the content was okay, nothing 'bad' was found. error : There was an error while checking the content. found : Something was found that the content inspection engine has determined merits attention. clean : The content inspection engine has found something that violates the security policy and has neutralized the content in the data flow. reject : The content inspection engine has found something that violates the security policy and has discarded the content. saved : The content inspection engine has found something that violates the security policy and has stored it in a quarentine storage area. | current | |||
| GenericEvent TEXTUAL-CONVENTION Generic Events - events for which there is no more specific enumeration abnormal : An abnormal event has occurred that is neither 'okay' nor an 'error'. okay : A normal event occurred or the system has changed from an abnormal state to a normal state error : An error event occurred | current | |||
| Hardware TEXTUAL-CONVENTION This textual convention is used to describe various hardware resouces that can be monitored by the firewall. memory - identifies memory. disk - identifies disk. power - identifies power. netInterface - identifies a network interface. tape - identifies a tape drive. controller - identifies hardware controller. cpu - identifies CPU. primaryUnit - identifies the primary unit of the two identical firewalls configured redundancy. secondaryUnit - identifies the secondary unit of the two identical firewalls configured redundancy. other - identifies other hardware. | current | |||
| HardwareStatus TEXTUAL-CONVENTION This textual convention is used to describe various events that are related to the resources on a firewall. other : Generic resource event. up : The resource is in service. down : The resource is not in service. error : There has been an error for this resource. overTemp : The resource is overheating. busy : The resource is busy. noMedia : A device doesn't have its needed media. backup : Processing has switched to the backup. active : This is the active unit. standby : This is the standby unit. | current | |||
| ResourceStatistics TEXTUAL-CONVENTION This textual convention is used to identify various statistics that are related to the resources on a firewall. highUse : The highest load the resource has had for a time period. The time period will be implementation dependent. highLoad : The highest load the resource has had since startup. maximum : The maximum amount of the resource that is available. minimum : The minimum amount of the resource that is available. low : The lowest amount of the resource that has been available since startup. high : The highest amount of the resource that has been available since startup. average : The average amount of the resource that has been available since startup. free : The amount of the resource that is currently available since startup. inUse : The amount of the resource that is currently in use, eg. CPU usage, memory usage. | current | |||
| SecurityEvent TEXTUAL-CONVENTION This textual convention is used to describe various security-related events and statistics on a firewall. other : Generic attack event. none : No attack is occurring, an informational event. dos : A denial of service attack has been detected. recon : A pattern of reconnaissance activity has been detected. pakFwd : A packet forwarding attack has been detected. addrSpoof : A spoofed address has been detected. svcSpoof : A spoofed service (eg., DNS) has been detected. thirdParty : This site is being used as a third-party for an attack on another network. For example, the 'smurf' attack or email spamming. complete : An attack has terminated invlPak : An invalid packet with attack characteristics has been detected. illegCmd : An illegal command has been found. policy : An attempt has reen made to violate a security policy. | current | |||
| Services TEXTUAL-CONVENTION This textual convention is used to describe various services that are monitored by the firewall. otherFWService - a service that does not fit into any other category. fileXferFtp - identifies FTP, File Transfer Protocol. fileXferTftp - identifies TFTP, Trivial File Transfer Protocol fileXferFtps - identifies FTP, File Transfer Protocol running over Secure Sockets Layer. loginTelnet - identifies telnet loginRlogin - identifies rlogin. loginTelnets - identifies telnet over Secure Sockets Layer(SSL). remoteExecSunRPC - identifies Sun Remote Procedure Call Protocol. remoteExecMSRPC - identifies Microsoft Remote Procedure Call Protocol. remoteExecRsh - identifies the remote shell. remoteExecXserver - identifies the Xwindows server. webHttp - identifies Hyper Text Transfer Protocol. webHttps - identifies the secure HTTP protocol. mailSmtp - identifies SMTP, Simple Mail Transfer Protocol. mailSmtps - identifies SMTP, Simple Mail Transfer Protocol running over Secure Sockets Layer (SSL). multimediaStreamworks - identifies streamworks. multimediaH323 - identifies H323. multimediaNetShow - identifies NetShow. multimediaVDOLive - identifies vDOLive. multimediaRealAV - identifies RealAV. multimediaRTSP - identifies Real Time Streaming Protocol dbOracle - identifies Oracle's SQL*Net. dbMSsql - identifies MicroSoft SQL. contInspProgLang - identifies a payload as a programming language such as Java or ActiveX. contInspUrl - identifies a payload as a URL. directoryNis - identifies NIS, Network Information Service. directoryDns - identifies DNS, Domain Name Service. directoryNetbiosns - identifies NetBIOSNS - NetBIOS Name Service. directoryNetbiosdgm - identifies NetBIOSNS - NetBIOS datagram Service. directoryNetbiosssn - identifies NetBIOSNS - NetBIOS Session Service. directoryWins - identifies Windows Internet Naming Service (WINS). qryWhois - identifies WhoIs service. qryFinger - identifies finger. qryIdent - identifies Ident. fsNfsStatus - identifies Network File System (NFS) Status. fsNfs - identifies Network File System (NFS). fsCifs - identifies CIFS, Common Internet File Service. protoIcmp - identifies ICMP, Internet Control Message Protocol. protoTcp - identifies TCP, Transmission Control Protocol. protoUdp - identifies UDP, User Datagram Protocol. protoIp - identifies IP, Internet Protocol. protoSnmp - identifies SNMP, Simple Network Management Protocol. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoFirewallMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.1 | |||
| cfwEvents OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.1.1 | |||
| cfwBasicEvents OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.1.1.1 | |||
| cfwBasicEventsTableLastRow OBJECT-TYPE The index value of the most recently created row in the cfwBasicEventsTable. This number starts at 1 and increase by one with each new log entry. When this number wraps, all events are deleted. | 1.3.6.1.4.1.9.9.147.1.1.1.1 | Unsigned32 | read-only | current |
| cfwBasicEventsTable OBJECT-TYPE Table of basic data for firewall events. The agent may choose to delete the instances of cfwBasicEventsEntry as required because of lack of memory. The oldest Events will be selected first for deletion. | 1.3.6.1.4.1.9.9.147.1.1.1.2 | not-accessible | current | |
| cfwBasicEventsEntry OBJECT-TYPE An entry in the table, containing general information about an event. This table will always be sparse, i.e., each row will instanciate only a subet of the columnar objects. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1 | not-accessible | current | |
| cfwBasicEventIndex OBJECT-TYPE An index that uniquely identifies an entry in the log table. These indices are assigned beginning with 1 and increase by one with each new event logged. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1.1 | Unsigned32 | not-accessible | current |
| cfwBasicEventTime OBJECT-TYPE The time that the event occurred. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1.2 | DateAndTime | read-only | current |
| cfwBasicSecurityEventType OBJECT-TYPE The type of security-related event that this row contains. If the event is not security-related this object will not be instantiated. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1.3 | SecurityEvent | read-only | current |
| cfwBasicContentInspEventType OBJECT-TYPE The type of content inspection-related event that this row contains. If the event is not content inspection-related this object will not be instantiated. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1.4 | ContentInspectionEvent | read-only | current |
| cfwBasicConnectionEventType OBJECT-TYPE The type of connection-related event that this row contains. If the event is not connection-related this object will not be instantiated. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1.5 | ConnectionEvent | read-only | current |
| cfwBasicAccessEventType OBJECT-TYPE The type of access-related event that this row contains. If the event is not access-related this object will not be instantiated. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1.6 | AccessEvent | read-only | current |
| cfwBasicAuthenticationEventType OBJECT-TYPE The type of authentication-related event that this row contains. If the event is not authentication-related this object will not be instantiated. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1.7 | AuthenticationEvent | read-only | current |
| cfwBasicGenericEventType OBJECT-TYPE The type of generic event that this row contains. If the event does not fall into one of the other categories this object will be populated. Otherwise, this object will not be instantiated. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1.8 | GenericEvent | read-only | current |
| cfwBasicEventDescription OBJECT-TYPE A description of the event. The value of the object may be a zero-length string. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1.9 | SnmpAdminString | read-only | current |
| cfwBasicEventDetailsTableRow OBJECT-TYPE A pointer to a row in the table containing details about this event. Generally, the table will be the cfwNetEventsTable but a Cisco-defined table may also appear here. If there there is no more detailed information for this event the value of this object will have the value {0 0}. | 1.3.6.1.4.1.9.9.147.1.1.1.2.1.10 | RowPointer | read-only | current |
| cfwNetEvents OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.1.1.2 | |||
| cfwNetEventsTableLastRow OBJECT-TYPE The index value of the last row in the cfwNetEventsTable. This number starts at 1 and increase by one with each new log entry. When this number wraps, all events are deleted. | 1.3.6.1.4.1.9.9.147.1.1.2.1 | Unsigned32 | read-only | current |
| cfwNetEventsTable OBJECT-TYPE Table of detailed data for network events. The agent may choose to delete the instances of cfwBasicEventsEntry as required because of lack of memory. It is an implementation-specific matter as to when this deletion may occur. It is recommended that the oldest log instances are deleted first. | 1.3.6.1.4.1.9.9.147.1.1.2.2 | not-accessible | current | |
| cfwNetEventsEntry OBJECT-TYPE An entry in the table, containing detailed information about an event. Note that this table may be sparse. If Network Address Translation is not enabled cfwNetEventInsideSrcIpAddress and cfwNetEventInsideDstIpAddress will not be instantiated in the row. If Port Address Translation is not enabled cfwNetEventInsideSrcIpPort and cfwNetEventInsideDstIpPort will not be instantiated in the row. Entries are added to this table at the same time that events are added to the cfwBasicEventsTable. These two tables may be configured to be different sizes so there may not be a one-to-one correspondence between rows in the two tables. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1 | not-accessible | current | |
| cfwNetEventIndex OBJECT-TYPE An index that uniquely identifies an entry in the log table. These indices are assigned beginning with one and increase by one with each new log entry. When this number wraps, all events are deleted in order to allow the NMS to differentiate between old and new events. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.1 | Unsigned32 | not-accessible | current |
| cfwNetEventInterface OBJECT-TYPE The interface most closely associated with this event. For example, for an event that relates to the receipt of a packet, this object identifies the interface on which the packet was received. If there are multiple interfaces associated with an event, the interface most closely associated with the cause of the event will be used. For example, for an event for the setup of a TCP connection, the interface on the initiator's side of the connection would be preferred. If there is no associated interface, then this object has the value zero. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.2 | InterfaceIndexOrZero | read-only | current |
| cfwNetEventSrcIpAddress OBJECT-TYPE Source IP address in the IP packet that caused the event. If there is no packet associated with the event this object has the value of zero. If the event is the result of multiple packets with different source addresses, this value may be zero or an address taken from an arbitrarily chosen packet in the sequence of packets causing the event. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.3 | IpAddress | read-only | current |
| cfwNetEventInsideSrcIpAddress OBJECT-TYPE Source IP address after Network Address Translation has been applied. If NAT has not been applied to the source address in this packet this object will not be instantiated, resulting in a sparse table. If the event is the result of multiple packets with different source addresses, this value may be zero or an address taken from an arbitrarily chosen packet in the sequence of packets causing the event. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.4 | IpAddress | read-only | current |
| cfwNetEventDstIpAddress OBJECT-TYPE Destination IP address in the IP packet that caused the event. If there is no packet associated with the event this object has the value of zero. If the event is the result of multiple packets with different destination addresses, this value may be zero or an address taken from an arbitrarily chosen packet in the sequence of packets causing the event. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.5 | IpAddress | read-only | current |
| cfwNetEventInsideDstIpAddress OBJECT-TYPE Destination IP address after Network Address Translation has been applied. If NAT has not been applied to the destination address in this packet this object will not be instantiated, resulting in a sparse table. If the event is the result of multiple packets with different destination addresses, this value may be zero or an address taken from an arbitrarily chosen packet in the sequence of packets causing the event. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.6 | IpAddress | read-only | current |
| cfwNetEventSrcIpPort OBJECT-TYPE Source UDP/TCP port in the IP packet that caused the event. If there is no packet associated with the event this object has the value of zero. If the event is the result of multiple packets with different source ports, this value may be zero or a port taken from an arbitrarily chosen packet in the sequence of packets causing the event. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.7 | INTEGER (0..65535) | read-only | current |
| cfwNetEventInsideSrcIpPort OBJECT-TYPE Source UDP/TCP port after Port Address Translation has been applied. If PAT has not been applied to the source port in this packet this object will not be instantiated, resulting in a sparse table. If the event is the result of multiple packets with different source ports, this value may be zero or a port taken from an arbitrarily chosen packet in the sequence of packets causing the event. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.8 | INTEGER (0..65535) | read-only | current |
| cfwNetEventDstIpPort OBJECT-TYPE Destination UDP/TCP port in the IP packet that caused the event. If there is no packet associated with the event this object has the value of zero. If the event is the result of multiple packets with different destination ports, this value may be zero or a port taken from an arbitrarily chosen packet in the sequence of packets causing the event. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.9 | INTEGER (0..65535) | read-only | current |
| cfwNetEventInsideDstIpPort OBJECT-TYPE Destination UDP/TCP port after Port Address Translation has been applied. If PAT has not been applied to the Destination port in this packet this object will not be instantiated, resulting in a sparse table. If the event is the result of multiple packets with different destination ports, this value may be zero or a port taken from an arbitrarily chosen packet in the sequence of packets causing the event. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.10 | INTEGER (0..65535) | read-only | current |
| cfwNetEventService OBJECT-TYPE The identification of the type of service involved with this event. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.11 | Services | read-only | current |
| cfwNetEventServiceInformation OBJECT-TYPE Specific service information. This can be used to describe the particular service indentified by cfwNetEventService and can reflect whether the service is a local service or a gateway service. For example, if the value for cfwNetEventService is loginTelnet then the string provided might be 'local telnet'. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.12 | SnmpAdminString | read-only | current |
| cfwNetEventIdentity OBJECT-TYPE This object will contain a description of the entity that caused the event. The entity could be a userid, username, processid or other identifier for the entity using the service. If there is no such information then this object will contain a zero-length string. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.13 | SnmpAdminString | read-only | current |
| cfwNetEventDescription OBJECT-TYPE A detailed description of the event. | 1.3.6.1.4.1.9.9.147.1.1.2.2.1.14 | SnmpAdminString | read-only | current |
| cfwSystem OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.1.2 | |||
| cfwStatus OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.1.2.1 | |||
| cfwHardwareStatusTable OBJECT-TYPE Table of firewall cfwHardwareStatusEntry entries. | 1.3.6.1.4.1.9.9.147.1.2.1.1 | not-accessible | current | |
| cfwHardwareStatusEntry OBJECT-TYPE An entry in the table, containing status information about a resource. | 1.3.6.1.4.1.9.9.147.1.2.1.1.1 | not-accessible | current | |
| cfwHardwareType OBJECT-TYPE The hardware type for which this row provides status information. | 1.3.6.1.4.1.9.9.147.1.2.1.1.1.1 | Hardware | not-accessible | current |
| cfwHardwareInformation OBJECT-TYPE A detailed textual description of the resource identified by cfwHardwareType. | 1.3.6.1.4.1.9.9.147.1.2.1.1.1.2 | SnmpAdminString | read-only | current |
| cfwHardwareStatusValue OBJECT-TYPE This object contains the current status of the resource. | 1.3.6.1.4.1.9.9.147.1.2.1.1.1.3 | HardwareStatus | read-only | current |
| cfwHardwareStatusDetail OBJECT-TYPE A detailed textual description of the current status of the resource which may provide a more specific description than cfwHardwareStatusValue. | 1.3.6.1.4.1.9.9.147.1.2.1.1.1.4 | SnmpAdminString | read-only | current |
| cfwStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.1.2.2 | |||
| cfwBufferStatsTable OBJECT-TYPE A table conatining status information about a firewall's buffers. | 1.3.6.1.4.1.9.9.147.1.2.2.1 | not-accessible | current | |
| cfwBufferStatsEntry OBJECT-TYPE An entry in the table, containing status information about a particular statistic for the set of buffers of a particular size. | 1.3.6.1.4.1.9.9.147.1.2.2.1.1 | not-accessible | current | |
| cfwBufferStatSize OBJECT-TYPE This object contains the size of the set of buffers for which this row contains the statistics given by cfwBufferStatType. | 1.3.6.1.4.1.9.9.147.1.2.2.1.1.1 | Unsigned32 | not-accessible | current |
| cfwBufferStatType OBJECT-TYPE This object identifies the type of statistic given by this row for the particular set of buffers identified by cfwBufferStatSize. | 1.3.6.1.4.1.9.9.147.1.2.2.1.1.2 | ResourceStatistics | not-accessible | current |
| cfwBufferStatInformation OBJECT-TYPE A detailed textual description of the statistic identified by cfwBufferStatType. | 1.3.6.1.4.1.9.9.147.1.2.2.1.1.3 | SnmpAdminString | read-only | current |
| cfwBufferStatValue OBJECT-TYPE The value of the buffer statistic. | 1.3.6.1.4.1.9.9.147.1.2.2.1.1.4 | Gauge32 | read-only | current |
| cfwConnectionStatTable OBJECT-TYPE Table of firewall statistic instances. | 1.3.6.1.4.1.9.9.147.1.2.2.2 | not-accessible | current | |
| cfwConnectionStatEntry OBJECT-TYPE An entry in the table, containing information about a firewall statistic. | 1.3.6.1.4.1.9.9.147.1.2.2.2.1 | not-accessible | current | |
| cfwConnectionStatService OBJECT-TYPE The identification of the type of connection providing statistics. | 1.3.6.1.4.1.9.9.147.1.2.2.2.1.1 | Services | not-accessible | current |
| cfwConnectionStatType OBJECT-TYPE The state of the connections that this row contains statistics for. | 1.3.6.1.4.1.9.9.147.1.2.2.2.1.2 | ConnectionStat | not-accessible | current |
| cfwConnectionStatDescription OBJECT-TYPE A detailed textual description of this statistic. | 1.3.6.1.4.1.9.9.147.1.2.2.2.1.3 | SnmpAdminString | read-only | current |
| cfwConnectionStatCount OBJECT-TYPE This is an integer that contains the value of the resource statistic. If a type of 'gauge' is more appropriate this object will be omitted resulting in a sparse table. | 1.3.6.1.4.1.9.9.147.1.2.2.2.1.4 | Counter32 | read-only | current |
| cfwConnectionStatValue OBJECT-TYPE This is an integer that contains the value of the resource statistic. If a type of 'counter' is more appropriate this object will be omitted resulting in a sparse table. | 1.3.6.1.4.1.9.9.147.1.2.2.2.1.5 | Gauge32 | read-only | current |
| cfwConnectionPerSecond OBJECT-TYPE The current cps rate on the firewall. | 1.3.6.1.4.1.9.9.147.1.2.2.3 | Gauge32 | read-only | current |
| cfwConnectionPerSecondPeak OBJECT-TYPE The peak cps rate hit on the firewall. | 1.3.6.1.4.1.9.9.147.1.2.2.4 | Gauge32 | read-only | current |
| ciscoFirewallMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.2 | |||
| ciscoFirewallMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.2.0 | |||
| ciscoFirewallMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.3 | |||
| ciscoFirewallMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.3.1 | |||
| ciscoFirewallMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.147.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| cfwSecurityNotification NOTIFICATION-TYPE This notification is used for events involving security events. The included objects provide more detailed information about the event. | 1.3.6.1.4.1.9.9.147.2.0.2 | current |
| cfwContentInspectNotification NOTIFICATION-TYPE This notification is used to notify the NMS of content inspection events. The included objects provide more detailed information about the event. | 1.3.6.1.4.1.9.9.147.2.0.3 | current |
| cfwConnNotification NOTIFICATION-TYPE This notification is used to notify the NMS of connection-oriented events. The included objects provide more detailed information about the event. | 1.3.6.1.4.1.9.9.147.2.0.4 | current |
| cfwAccessNotification NOTIFICATION-TYPE This notification is used to notify the NMS of access events. The included objects provide more detailed information about the event. | 1.3.6.1.4.1.9.9.147.2.0.5 | current |
| cfwAuthNotification NOTIFICATION-TYPE This notification is used to notify the NMS of authentication events. The included objects provide more detailed information about the event. | 1.3.6.1.4.1.9.9.147.2.0.6 | current |
| cfwGenericNotification NOTIFICATION-TYPE This notification is used to notify the NMS of events that do not fall into the other categories. The included objects provide more detailed information about the event. | 1.3.6.1.4.1.9.9.147.2.0.7 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoFirewallMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco FirewallMIB. | 1.3.6.1.4.1.9.9.147.3.1.1 | deprecated |
| ciscoFirewallMIBComplianceRev1 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco FirewallMIB. | 1.3.6.1.4.1.9.9.147.3.1.2 | current |
| ciscoFirewallMIBEventsGroup OBJECT-GROUP Firewall events | 1.3.6.1.4.1.9.9.147.3.2.1 | current |
| ciscoFirewallMIBStatisticsGroup OBJECT-GROUP Firewall statistics | 1.3.6.1.4.1.9.9.147.3.2.2 | current |
| ciscoFirewallMIBNotificationGroup OBJECT-GROUP Firewall Notifications | 1.3.6.1.4.1.9.9.147.3.2.3 | obsolete |
| ciscoFirewallMIBNotificationGroupRev1 NOTIFICATION-GROUP Firewall Notifications | 1.3.6.1.4.1.9.9.147.3.2.4 | current |