CISCO-FCTRACEROUTE-MIB
- Registered at
- 1.3.6.1.4.1.9.9.296
- Last updated
- 2002-10-07 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2002-10-07 00:00
- Namespace
- cisco
- Source file
CISCO-FCTRACEROUTE-MIB- Digest
sha256:b32af5e9bcc231e2e2aa816f4e63bf0ba5434ff72913b3a1f266823678ac7032
Description
The MIB module for the management of the Fibre Channel Trace Route functionality.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-san@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-FCPING-MIB | FcStartOper |
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | FcAddress, FcAddressType, FcNameId, VsanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-FCPING-MIB CISCO-FCTRACEROUTE-MIB CISCO-SMI CISCO-ST-TC SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoFcTraceRouteMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.296.1 | |||
| fcTraceRouteConfiguration OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.296.1.1 | |||
| fcTraceRouteTable OBJECT-TYPE A table of trace route request entries. The fcTraceRouteTable will contain a set of trace route requests that need to be executed at the agent. | 1.3.6.1.4.1.9.9.296.1.1.1 | not-accessible | current | |
| fcTraceRouteEntry OBJECT-TYPE A trace route request entry. A management station wishing to create an entry should generate a pseudo-random number to be used as an index into this table and create an instance of the fcTraceRouteRowStatus object. After that, the management station should set the corresponding instance of fcTraceRouteTargetAddr object with the address of the destination for which the route needs to be determined and fcTraceRouteVsanIndex with the desired VSAN number. Once the appropriate instance of all the configuration objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active and the corresponding instance of fcTraceRouteAdminStatus should be set to 'enable' to initiate the trace route sequence. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted configuration objects. The results of the trace route operation are made available in the fcTraceRouteHopsTable. For an entry uniquely identified by fcTraceRouteIndex, the value of the corresponding instance of fcTraceRouteOperStatus object will specify whether test was a success or a failure. The fcTraceRouteHopsTable will contain the actual hops that were determined by the test. For an entry uniquely identified by fcTraceRouteIndex, entries will be created automatically in the fcTraceRouteHopsTable which contain the different hops of the trace route path. Once the trace route test is complete, the management station should retrieve the information from the fcTraceRouteHopsTable and delete the entry from this table. When an entry is deleted from this table, related entries in the fcTraceRouteHopsTable will be automatically deleted by the agent. In order to prevent old entries from clogging the table, entries will be aged out. But an entry will never be deleted within fcTraceRouteAgeInterval milliseconds of completing. If the management station wishes to repeat the trace route test for a particular destination, then it will need to set the corresponding instance of fcTraceRouteAdminStatus to 'enable' again. | 1.3.6.1.4.1.9.9.296.1.1.1.1 | not-accessible | current | |
| fcTraceRouteIndex OBJECT-TYPE The index of a trace route entry. This object uniquely identifies a trace route request entry on a particular VSAN. | 1.3.6.1.4.1.9.9.296.1.1.1.1.1 | Unsigned32 (1..2147483647) | not-accessible | current |
| fcTraceRouteVsanIndex OBJECT-TYPE This object identifies the VSAN on which this trace route request is to be performed. This object cannot be modified if the corresponding instance of fcTraceRouteOperStatus object has a value of 'inProgress'. | 1.3.6.1.4.1.9.9.296.1.1.1.1.2 | VsanIndex | read-create | current |
| fcTraceRouteTargetAddrType OBJECT-TYPE The format of the corresponding instance of fcTraceRouteTargetAddr object. | 1.3.6.1.4.1.9.9.296.1.1.1.1.3 | FcAddressType | read-create | current |
| fcTraceRouteTargetAddr OBJECT-TYPE The address of the device to which the route is to be traced. If the value of the corresponding instance of fcTraceRouteTargetAddrType object is 'wwn', then this object will contain an 8 octet long WWN. If the value of the corresponding instance of fcTraceRouteTargetAddrType object is 'fcid', then this object will contain a 3 octet long FCID. This object MUST be set to a valid value before or concurrently with setting the corresponding instance of fcTraceRouteRowStatus to 'active'. | 1.3.6.1.4.1.9.9.296.1.1.1.1.4 | FcAddress | read-create | current |
| fcTraceRouteTimeout OBJECT-TYPE The timeout value for this trace route request. This object cannot be modified if the corresponding instance of fcTraceRouteOperStatus object has a value of 'inProgress'. | 1.3.6.1.4.1.9.9.296.1.1.1.1.5 | Unsigned32 (5..25) | read-create | current |
| fcTraceRouteAdminStatus OBJECT-TYPE This object specifies the desired state that a fcTraceRouteEntry should be in: enable(1) - Attempt to activate the test as defined by this entry. disable(2) - Deactivate the test as defined by this entry. The actual operational state of this test is indicated by the corresponding instance of fcTraceRouteOperStatus. When the trace route test corresponding to this entry is executing, this object cannot be modified. If this object is read at such a time, a value of 'enable' will be returned. When the test completes, the value of this object will be made 'disable' automatically by the agent. | 1.3.6.1.4.1.9.9.296.1.1.1.1.6 | FcStartOper | read-create | current |
| fcTraceRouteOperStatus OBJECT-TYPE This object indicates the operational status of this fcTraceRouteEntry. inProgress(1) - Indicates that the trace route test as defined by this instance of fcTraceRouteEntry is currently running. success(2) - Indicates that the trace route test as defined by this instance of fcTraceRouteEntry is currently complete and the whole path to the destination has been traced. partialSuccess(3) - Indicates that the trace route test as defined by this instance of fcTraceRouteEntry is currently partially successful. failure(4) - Indicates that the trace route test as defined by this instance of fcTraceRouteEntry has currently failed due to resource limitations. disabled(5) - Indicates that the trace route test as defined by this instance of fcTraceRouteEntry is currently disabled. Initially the value of this object will be 'inProgress' when the test is being executed. Once the test completes, the value of this object will be 'success' or 'partialSuccess' depending on the outcome of the test. If the value of this object is 'success', then the route to the target as determined by this test will be available in the fcTraceRouteHopsTable. If the value of this object is 'partialSuccess', then the fcTraceRouteHopsTable will contain that portion of the route that was traced by the test. If the value of this object is 'failure', then the test was not carried out and the fcTraceRouteHopsTable will not have any entries corresponding to this test. If the value of the corresponding instance of fcTraceRouteAdminStatus is 'disable', then this object will have a value of 'disabled'. | 1.3.6.1.4.1.9.9.296.1.1.1.1.7 | INTEGER {inProgress(1), success(2), partialSuccess(3), failure(4), disabled(5)} | read-only | current |
| fcTraceRouteAgeInterval OBJECT-TYPE The amount of time to wait after a trace route test completes before the entry is aged out. This object cannot be modified if the corresponding instance of fcTraceRouteOperStatus object has a value of 'inProgress'. | 1.3.6.1.4.1.9.9.296.1.1.1.1.8 | Unsigned32 (500000..900000) | read-create | current |
| fcTraceRouteTrapOnCompletion OBJECT-TYPE This object specifies if fcTraceRouteCompletionNotify notification should be generated or not when this trace route test completes. If this object is set to 'true', then the notification is generated. If this object is set to 'false', then the notification is not generated. This object cannot be modified if the corresponding instance of fcTraceRouteOperStatus object is having a value of 'inProgress'. | 1.3.6.1.4.1.9.9.296.1.1.1.1.9 | TruthValue | read-create | current |
| fcTraceRouteRowStatus OBJECT-TYPE The status of this conceptual row. If a trace route test is being executed and if the corresponding instance of this object is set to 'destroy', then the trace route test will be stopped. | 1.3.6.1.4.1.9.9.296.1.1.1.1.10 | RowStatus | read-create | current |
| fcTraceRouteResults OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.296.1.2 | |||
| fcTraceRouteHopsTable OBJECT-TYPE A table of trace route hop results. This table contains the hop-by-hop result of a trace route test performed for an entry in the fcTraceRouteTable. | 1.3.6.1.4.1.9.9.296.1.2.1 | not-accessible | current | |
| fcTraceRouteHopsEntry OBJECT-TYPE A trace route hop entry. The first index identifies the fcTraceRouteEntry that a fcTraceRouteHopsEntry belongs to. The second index element selects a hop in a trace route path. Entries are created automatically in this table corresponding to a fcTraceRouteEntry when the trace route test completes. In the case of a complete path being traced, the source and destination points along with the intermediate hops will be listed in this table. The entries in this table corresponding to a fcTraceRouteEntry are automatically deleted when the fcTraceRouteEntry is deleted or aged out. | 1.3.6.1.4.1.9.9.296.1.2.1.1 | not-accessible | current | |
| fcTraceRouteHopsHopIndex OBJECT-TYPE This object specifies the hop index for a traceroute hop. Values for this object with respect to the same fcTraceRouteIndex MUST start at 1 and increase monotonically. All hops (traceRouteHopsTable entries) in a trace route path MUST be updated at the same time when a trace route test completes. | 1.3.6.1.4.1.9.9.296.1.2.1.1.1 | Unsigned32 (1..2147483647) | not-accessible | current |
| fcTraceRouteHopsHopAddr OBJECT-TYPE This object reports the WWN of the device associated with this hop. | 1.3.6.1.4.1.9.9.296.1.2.1.1.2 | FcNameId | read-only | current |
| fcTraceRouteHopsHopLatencyValid OBJECT-TYPE This object indicates whether the corresponding instance of fcTraceRouteHopsHopLatency object contains a valid value. If the value of this object is 'true', then the corresponding instance of fcTraceRouteHopsHopLatency contains a valid value. If the value of this object is 'false', then the corresponding instance of fcTraceRouteHopsHopLatency does not contain a valid value and should be ignored. | 1.3.6.1.4.1.9.9.296.1.2.1.1.3 | TruthValue | read-only | current |
| fcTraceRouteHopsHopLatency OBJECT-TYPE This object reports the round trip time associated with this hop. | 1.3.6.1.4.1.9.9.296.1.2.1.1.4 | Unsigned32 (0..25000000) | read-only | current |
| fcTraceRouteNotification OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.296.1.3 | |||
| fcTraceRouteNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.296.1.3.0 | |||
| fcTraceRouteMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.296.2 | |||
| fcTraceRouteMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.296.2.1 | |||
| fcTraceRouteMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.296.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| fcTraceRouteCompletionNotify NOTIFICATION-TYPE This notification is generated whenever a trace route test is completed and the corresponding instance of fcTraceRouteTrapOnCompletion is set to 'true'. The agent is encouraged to append, at the end of this notification's varbindlist, one varbind for each hop of the traced route. Each such appended varbind would contain an instance of fcTraceRouteHopsHopAddr object. If the number of varbinds required would cause the notification to approach it's maximum size, the number of instances of fcTraceRouteHopsHopAddr will be truncated suitably. | 1.3.6.1.4.1.9.9.296.1.3.0.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| fcTraceRouteMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Fibre Channel Trace Route functionality. | 1.3.6.1.4.1.9.9.296.2.1.1 | current |
| fcTraceRouteConfigGroup OBJECT-GROUP A collection of objects for configuring Fibre Channel Trace route functionality. | 1.3.6.1.4.1.9.9.296.2.2.1 | current |
| fcTraceRouteResultsGroup OBJECT-GROUP A collection of objects for displaying Fibre Channel Trace route results. | 1.3.6.1.4.1.9.9.296.2.2.2 | current |
| fcTraceRouteNotifyGroup NOTIFICATION-GROUP A collection of notification(s) for monitoring Fibre Channel Trace route test completion. | 1.3.6.1.4.1.9.9.296.2.2.3 | current |