CISCO-FC-SPAN-MIB
- Registered at
- 1.3.6.1.4.1.9.9.363
- Last updated
- 2003-04-09 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2003-04-09 00:00
- Namespace
- cisco
- Source file
CISCO-FC-SPAN-MIB- Digest
sha256:286b3d618c1f17acf00c263bc5e66eda00f0234e49646a0710f865ac109ea229
Description
MIB module for displaying and configuring Switched Port Analyzer(SPAN) related features in a Fibre Channel device. SPAN is a feature that enables the user to analyze network traffic, passing through the ports (called SPAN source ports) in a switched network using SwitchProbe device attached to a switch port called SPAN destination (SD) port. SPAN feature is non- intrusive and does not affect switching of network traffic for any of the source ports.
Contact
Cisco Systems Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-san@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| CISCO-ZS-MIB | FcList |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-FC-SPAN-MIB CISCO-NS-MIB CISCO-SMI CISCO-ST-TC CISCO-TC CISCO-VSAN-MIB CISCO-ZS-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| SessionIndex TEXTUAL-CONVENTION An arbitrary value which identifies a session. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoSpanMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.363.1 | |||
| cspanConfiguration OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.363.1.1 | |||
| cspanMaxSessions OBJECT-TYPE Maximum number of SPAN sessions that this device supports. | 1.3.6.1.4.1.9.9.363.1.1.1 | Integer32 (1..4095) | read-only | current |
| cspanSessionTable OBJECT-TYPE cspanSessionTable is a table that lets the user configure and monitor the SPAN sessions. A SPAN session represents an association of one destination port with traffic redirected from different interfaces and VSANs (Virtual Storage Area Networks). In most situations, there would be only one active session. The flexibility to configure multiple sessions is helpful in sharing the analyzer that is attached to the SPAN destination port. In other words, the user can configure multiple sessions, but only one is active. However, it is possible to have multiple session active at a given time. The traffic on the SPAN destination port is the result of the combination of the active sessions. | 1.3.6.1.4.1.9.9.363.1.1.2 | not-accessible | current | |
| cspanSessionEntry OBJECT-TYPE A SPAN session entry. Each session consists of session number, session Administrative Status session OperationStatus, session InactiveReason (if the session OperationStatus is Inactive) and a rowStatus object to add/delete sessions. cspanSessionIndex is the Index of this table that identifies a session. To Add a session: 1. Specify the session to be added (cspanSessionIndex) 2. Set the cspanSessionRowStatus to createAndGo (4). To Delete a session: 1. Specify the session to be deleted (cspanSessionIndex). 2. Set the cspanSessionRowStatus to destroy (6). | 1.3.6.1.4.1.9.9.363.1.1.2.1 | not-accessible | current | |
| cspanSessionIndex OBJECT-TYPE An arbitrary value which identifies a session. The value of this index must be less than the value of cspanMaxSessions. | 1.3.6.1.4.1.9.9.363.1.1.2.1.1 | SessionIndex | not-accessible | current |
| cspanSessionDestIfIndex OBJECT-TYPE The ifIndex of the destination port to be configured for the session specified by the instance of cspanSessionIndex. | 1.3.6.1.4.1.9.9.363.1.1.2.1.2 | InterfaceIndex | read-create | current |
| cspanSessionAdminStatus OBJECT-TYPE This object is used to suspend an active session or activate an inactive session. Note that setting the value to the existing value has no effect on the operation. i.e. setting the value to 'active' when session is 'active' has no effect. | 1.3.6.1.4.1.9.9.363.1.1.2.1.3 | INTEGER {active(1), inactive(2)} | read-create | current |
| cspanSessionOperStatus OBJECT-TYPE The current state of the session. | 1.3.6.1.4.1.9.9.363.1.1.2.1.4 | INTEGER {active(1), inactive(2)} | read-only | current |
| cspanSessionInactiveReason OBJECT-TYPE The description of the reason that this session is not active. This string will be a zero length string in case the session is active. | 1.3.6.1.4.1.9.9.363.1.1.2.1.5 | SnmpAdminString | read-only | current |
| cspanSessionRowStatus OBJECT-TYPE Status of this row. | 1.3.6.1.4.1.9.9.363.1.1.2.1.6 | RowStatus | read-create | current |
| cspanSourcesIfTable OBJECT-TYPE The cspanSourcesIfTable is used to configure source interfaces for SPAN sessions. | 1.3.6.1.4.1.9.9.363.1.1.3 | not-accessible | current | |
| cspanSourcesIfEntry OBJECT-TYPE A SPAN source interface entry. Each entry consists of session index, interface index of the source interface, the ingress or egress direction of the traffic on that interface and a rowStatus object | 1.3.6.1.4.1.9.9.363.1.1.3.1 | not-accessible | current | |
| cspanSourcesIfIndex OBJECT-TYPE cspanSourcesIfIndex denotes the interface index for this session. | 1.3.6.1.4.1.9.9.363.1.1.3.1.1 | InterfaceIndex | not-accessible | current |
| cspanSourcesDirection OBJECT-TYPE cspanSourcesDirection denotes traffic direction on the cspanSourcesIfIndex. | 1.3.6.1.4.1.9.9.363.1.1.3.1.2 | INTEGER {receive(1), transmit(2)} | not-accessible | current |
| cspanSourcesRowStatus OBJECT-TYPE Status of this row. | 1.3.6.1.4.1.9.9.363.1.1.3.1.3 | RowStatus | read-create | current |
| cspanSourcesVsanTable OBJECT-TYPE The cspanSourcesVsanTable is used to list source VSANs for SPAN sessions. | 1.3.6.1.4.1.9.9.363.1.1.4 | not-accessible | current | |
| cspanSourcesVsanEntry OBJECT-TYPE An entry in the Source VSAN Table. For the session identified by the instance of cspanSessionIndex, it lists the VSANs that comprise the sources. | 1.3.6.1.4.1.9.9.363.1.1.4.1 | not-accessible | current | |
| cspanSourcesVsans2k OBJECT-TYPE The VSANs that are traffic sources to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 1 through 8, the second octet specifying VSAN 9 through 16, etc. Since there are 256 octets, the range of VSANs is from 0-2047. Within each octet, the most significant bit represents the lowest numbered VSAN id and the least significant bit represents the highest numbered VSAN id. Thus each VSAN is represented by a single bit within the value of this object. If that bit has value '1' then that VSAN is included in the set of VSANs; the VSAN is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.9.363.1.1.4.1.1 | FcList | read-only | current |
| cspanSourcesVsans4k OBJECT-TYPE The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 2048 through 2055, the second octet specifying VSAN 2056 through 2063, etc. Since there are 256 octets, he range of VSANs is from 2048 through 4095. Within each octet, the most significant bit represents the lowest numbered VSAN id and the least significant bit represents the highest numbered VSAN id. Thus each VSAN is represented by a single bit within the value of this object. If that bit has value '1' then that VSAN is included in the set of VSANs; the VSAN is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.9.363.1.1.4.1.2 | FcList | read-only | current |
| cspanSourcesVsanCfgTable OBJECT-TYPE The cspanSourcesVsanCfgTable is used to configure sources VSANs for SPAN sessions. | 1.3.6.1.4.1.9.9.363.1.1.5 | not-accessible | current | |
| cspanSourcesVsanCfgEntry OBJECT-TYPE An entry in the source Vsan Configuration Table. Each entry represents either an add or a delete VSANs operation for the session identified by the instance of cspanSourcesVsanCfgSessIndex. The VSANs to be added (or deleted) are specified by the values of cspanSourcesVsanCfgVsans2k and cspanSourcesVsanCfgVsans4k. | 1.3.6.1.4.1.9.9.363.1.1.5.1 | not-accessible | current | |
| cspanSourcesVsanCfgSessIndex OBJECT-TYPE A session index associated with a session for which the VSANs are to be added/deleted. | 1.3.6.1.4.1.9.9.363.1.1.5.1.1 | SessionIndex | not-accessible | current |
| cspanSourcesVsanCfgCommand OBJECT-TYPE The command to be executed for this entry. Only acceptable commands are 'add' and 'remove'. 'none' is returned in case of read operation. | 1.3.6.1.4.1.9.9.363.1.1.5.1.2 | INTEGER {add(1), remove(2), none(3)} | read-write | current |
| cspanSourcesVsanCfgVsans2k OBJECT-TYPE The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 1 through 8, the second octet specifying VSAN 9 through 16, etc. Since there are 256 octets, the range of VSANs is from 0-2047. Within each octet, the most significant bit represents the lowest numbered VSAN id and the least significant bit represents the highest numbered VSAN id. Thus each VSAN is represented by a single bit within the value of this object. If that bit has value '1' then that VSAN is included in the set of VSANs; the VSAN is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.9.363.1.1.5.1.3 | FcList | read-write | current |
| cspanSourcesVsanCfgVsans4k OBJECT-TYPE The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 2048 through 2055, the second octet specifying VSAN 2056 through 2063, etc. The range of VSANs is 2048-4095. Within each octet, the most significant bit represents the lowest numbered VSAN id and the least significant bit represents the highest numbered VSAN id. Thus each VSAN is represented by a single bit within the value of this object. If that bit has value '1' then that VSAN is included in the set of VSANs; the VSAN is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.9.363.1.1.5.1.4 | FcList | read-write | current |
| cspanVsanFilterTable OBJECT-TYPE The cspanVsanFilterTable is used to monitor and configure VSAN filters for SPAN sessions. cspanVsanFilterSessIndex denotes the session index of this sesion. cspanVsanFilterVsans2k and cspanVsanFilterVsans4k denote the VSANs in a bit mask fashion for each session. | 1.3.6.1.4.1.9.9.363.1.1.6 | not-accessible | current | |
| cspanVsanFilterEntry OBJECT-TYPE An entry in the VsanFilter Table. cspanVsanFilterVsans2k and cspanVsanFilterVsans4k denote the VSANs that are part of the filter applied to the session identified by the instance of cspanVsanFilterSessIndex. | 1.3.6.1.4.1.9.9.363.1.1.6.1 | not-accessible | current | |
| cspanVsanFilterSessIndex OBJECT-TYPE A session index associated with a session. | 1.3.6.1.4.1.9.9.363.1.1.6.1.1 | SessionIndex | not-accessible | current |
| cspanVsanFilterVsans2k OBJECT-TYPE The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 1 through 8, the second octet specifying VSAN 9 through 16, etc. Since there are 256 octets, the range of VSANs is from 0-2047. Within each octet, the most significant bit represents the lowest numbered VSAN id and the least significant bit represents the highest numbered VSAN id. Thus each VSAN is represented by a single bit within the value of this object. If that bit has value '1' then that VSAN is included in the set of VSANs; the VSAN is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.9.363.1.1.6.1.2 | FcList | read-only | current |
| cspanVsanFilterVsans4k OBJECT-TYPE The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 2048 through 2055, the second octet specifying VSAN 2056 through 2063, etc. the range of VSANs is 2048-4095. Within each octet, the most significant bit represents the lowest numbered VSAN id and the least significant bit represents the highest numbered VSAN id. Thus each VSAN is represented by a single bit within the value of this object. If that bit has value '1' then that VSAN is included in the set of VSANs; the VSAN is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.9.363.1.1.6.1.3 | FcList | read-only | current |
| cspanVsanFilterOpTable OBJECT-TYPE cspanVsanFilterOpTable is used to configure VSAN filters for SPAN sessions. cspanVsanFilterSessIndex denotes the session index of this sesion. cspanVsanFilterVsans denotes the VSANs in a bit mask fashion for each session. | 1.3.6.1.4.1.9.9.363.1.1.7 | not-accessible | current | |
| cspanVsanFilterOpEntry OBJECT-TYPE An entry in the VsanFilterOp Table. | 1.3.6.1.4.1.9.9.363.1.1.7.1 | not-accessible | current | |
| cspanVsanFilterOpSessIndex OBJECT-TYPE A session index associated with a session. | 1.3.6.1.4.1.9.9.363.1.1.7.1.1 | SessionIndex | not-accessible | current |
| cspanVsanFilterOpCommand OBJECT-TYPE The command to be executed for this entry. | 1.3.6.1.4.1.9.9.363.1.1.7.1.2 | INTEGER {add(1), remove(2), none(3)} | read-write | current |
| cspanVsanFilterOpVsans2k OBJECT-TYPE The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 1 through 8, the second octet specifying VSAN 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VSAN id and the least significant bit represents the highest numbered VSAN id. Thus each VSAN is represented by a single bit within the value of this object. If that bit has value '1' then that VSAN is included in the set of VSANs; the VSAN is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.9.363.1.1.7.1.3 | FcList | read-write | current |
| cspanVsanFilterOpVsans4k OBJECT-TYPE The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 2048 through 2055, the second octet specifying VSAN 2056 through 2063, etc. In each octet, the most significant bit represents the lowest numbered VSAN id and the least significant bit represents the highest numbered VSAN id. Thus each VSAN is represented by a single bit within the value of this object. If that bit has value '1' then that VSAN is included in the set of VSANs; the VSAN is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.9.363.1.1.7.1.4 | FcList | read-write | current |
| ciscoFcSpanMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.363.2 | |||
| ciscoFcSpanMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.363.2.1 | |||
| ciscoFcSpanMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.363.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoFcSpanMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-FC-SPAN-MIB. | 1.3.6.1.4.1.9.9.363.2.1.1 | current |
| cspanScalarsGroup OBJECT-GROUP A collection of scalar objects in this MIB. | 1.3.6.1.4.1.9.9.363.2.2.1 | current |
| cspanSessionsGroup OBJECT-GROUP A collection of objects for sessions configuration. | 1.3.6.1.4.1.9.9.363.2.2.2 | current |
| cspanSourceIfGroup OBJECT-GROUP A collection of objects for source interface configuration. | 1.3.6.1.4.1.9.9.363.2.2.3 | current |
| cspanSourceVsanGroup OBJECT-GROUP A collection of objects for source VSANs display. | 1.3.6.1.4.1.9.9.363.2.2.4 | current |
| cspanSourceVsanCfgGroup OBJECT-GROUP A collection of objects for source VSANs configuration. | 1.3.6.1.4.1.9.9.363.2.2.5 | current |
| cspanVsanFilterGroup OBJECT-GROUP A collection of objects for filter display information. | 1.3.6.1.4.1.9.9.363.2.2.6 | current |
| cspanVsanFilterOpGroup OBJECT-GROUP A collection of objects for filter operations. | 1.3.6.1.4.1.9.9.363.2.2.7 | current |