CISCO-FC-MULTICAST-MIB
- Registered at
- 1.3.6.1.4.1.9.9.435
- Last updated
- 2004-10-07 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2004-10-07 00:00
- Namespace
- cisco
- Source file
CISCO-FC-MULTICAST-MIB- Digest
sha256:8b2a0f5c1241430420d6e0ebc345c342c3da57953f5309a85a483201b6db1faf
Description
MIB module for monitoring and configuring Fibre Channel Multicast feature.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-san@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | DomainIdOrZero |
| CISCO-VSAN-MIB | vsanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-FC-MULTICAST-MIB CISCO-SMI CISCO-ST-TC CISCO-TC CISCO-VSAN-MIB IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CfmMulticastRootMode TEXTUAL-CONVENTION The multicast Root Mode. principalSwitch - principal switch is used as the root for multicast tree computation. lowestDomainIdSwitch - lowest domainId switch is used as the root for mulitcast tree computation. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoFcMulticastNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.435.0 | |||
| ciscoFcMulticastMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.435.1 | |||
| cfmConfiguration OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.435.1.1 | |||
| cfmMulticastRootTable OBJECT-TYPE This table allows the users to configure and monitor the FC Multicast parameters on all the VSANs configured on the local switch. An entry is automatically created in this table if there is an entry in the fspfTable (defined in CISCO-FSPF-MIB) and fspfOperStatus (defined in CISCO-FSPF-MIB) for that entry is 'up'. An entry is automatically deleted from this table if either : a) the fspfOperStatus in the fspfTable entry for the corresponding VSAN changes to 'down'. or b) the fspfTable entry for the corresponding VSAN is deleted. Entries in this table can be created via cfmMulticastRootRowStatus only as the means to specify non-default parameter values for a VSAN either because the VSAN is suspended or fspfOperStatus (defined in CISCO-FSPF-MIB) for that VSAN is 'down' (VSAN state is indicated by object vsanOperState which is defined in CISCO-VSAN-MIB). So an entry in this table exists when one or both of these conditions holds: - one or more configuration parameters have non-default values for a VSAN which is either suspended or the fspfOperStatus for that VSAN is down. - the fspfOperStatus for VSAN is 'up'. This has a number of consequences: - an entry exists for a suspended VSAN whenever that VSAN has non-default parameters. - an entry cannot be created (via cfmMulticastRootRowStatus) for a VSAN with default parameters; instead, the agent creates/deletes an entry for a VSAN with default parameters according to whether the fspfOperStatus is 'up' or 'down'. - an entry can not be created via cfmMulticastRootRowStatus unless non-default parameter values are (simultaneously) configured for a VSAN whose fspfOperStatus is 'down'. - deleting an entry via cfmMulticastRootRowStatus when either the VSAN is suspended and configured with non-default values or the VSAN is active, is equivalent to resetting its parameters to their default values. If an entry is configured with default-values and the VSAN is in suspended state, then the entry would be deleted. | 1.3.6.1.4.1.9.9.435.1.1.1 | not-accessible | current | |
| cfmMulticastRootEntry OBJECT-TYPE This entry contains the multicase parameters on this VSAN. | 1.3.6.1.4.1.9.9.435.1.1.1.1 | not-accessible | current | |
| cfmMulticastRootConfigMode OBJECT-TYPE The configured multicast root mode on this VSAN. | 1.3.6.1.4.1.9.9.435.1.1.1.1.1 | CfmMulticastRootMode | read-create | current |
| cfmMulticastRootOperMode OBJECT-TYPE The operational multicast root mode on this VSAN. | 1.3.6.1.4.1.9.9.435.1.1.1.1.2 | CfmMulticastRootMode | read-only | current |
| cfmMulticastRootDomainId OBJECT-TYPE The domainID of the multicast root on this VSAN. | 1.3.6.1.4.1.9.9.435.1.1.1.1.3 | DomainIdOrZero | read-only | current |
| cfmMulticastRootRowStatus OBJECT-TYPE The status of conceptual row on this VSAN. This object can be used to create an entry only if either the corresponding VSAN is suspended or the fspfOperStatus is down. If the VSAN is either not-existent or fspfOperStatus is up, the create will fail. | 1.3.6.1.4.1.9.9.435.1.1.1.1.4 | RowStatus | read-create | current |
| ciscoFcMulticaseConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.435.2 | |||
| ciscoFcMulticastMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.435.2.1 | |||
| ciscoFcMulticastMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.435.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoFcMulticastMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-FC-MULTICAST-MIB. | 1.3.6.1.4.1.9.9.435.2.1.1 | current |
| cfmConfigurationGroup OBJECT-GROUP A collection of objects for FC multicast configuration. | 1.3.6.1.4.1.9.9.435.2.2.1 | current |