CISCO-FC-MGMT-MIB
- Registered at
- 1.3.6.1.4.1.9.10.999999
- Last updated
- 2002-09-12 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2002-09-12 00:00
- Namespace
- cisco
- Source file
CISCO-FC-MGMT-MIB- Digest
sha256:d26cdaaa0ebc1496ec3cb6115e0cfbb3b6cbf8565155418a6338b1e2264dc36f
Description
This module defines management information specific to Fibre Channel-attached devices. This module is an adaptation of IETF's IPS working group's draft, draft-ietf-ips-fcmgmt-mib-02
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-dwdm@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-FC-MGMT-MIB CISCO-SMI IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CfcmDomainIdOrZero TEXTUAL-CONVENTION The Domain Id (of a FC switch), or zero if no Domain Id has been assigned. | current | |||
| CfcmFcAddressId TEXTUAL-CONVENTION A Fibre Channel Address ID, a 24-bit value unique within the address space of a Fabric. | current | |||
| CfcmFcBbCredit TEXTUAL-CONVENTION The buffer-to-buffer credit of an FC port. i.e., the number of frames a FC device can receive at a time without causing a buffer overrun condition. | current | |||
| CfcmFcBbCreditModel TEXTUAL-CONVENTION The buffer-to-buffer credit model of an Fx_Port. | current | |||
| CfcmFcClasses TEXTUAL-CONVENTION A set of Fibre Channel classes of service. | current | |||
| CfcmFcDataFieldSize TEXTUAL-CONVENTION The Receive Data Field Size associated with an FC port. | current | |||
| CfcmFcNameIdOrZero TEXTUAL-CONVENTION The World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. | current | |||
| CfcmFcPortType TEXTUAL-CONVENTION The type of a Fibre Channel port, being one of the types described below. unknown - Fibre Channel port type is not known. other - the port type is something other than the ones described below. dynamic - the port could be one of the below port types and this varies dynamically. nPort - Any port on a node device, e.g., a disk, PC, etc. that is directly attached to a Fabric port. (Refer FC-PH, FC-FS). nlPort - An 'nPort' that also has arbitrated loop capabilities. (Refer FC-AL-2). fPort - A port on a fibre channel fabric. (Refer FC-PH, FC-FS). flPort - A 'fPort' that also has arbitrated loop capabilities. (Refer FC-AL-2). ePort - A fabric expansion port which attaches to another 'ePort' or 'bPort' to create an Inter-Switch Link. (Refer FC-SW-2). bPort - A bridge port on a device that implements FC-BBW and connects to an E_port on a switch. (Refer FC-BB). | current | |||
| CfcmFcUnitFunctions TEXTUAL-CONVENTION A set of functions that a Fibre Channel Interconnect Element or Platform might perform. A value with no bits set, indicates the function(s) are unknown. The individual bits have the following meanings: other - none of the following. hub - a device that interconnects L_Ports, but does not operate as an FL_Port. switch - a fabric element conforming to the Fibre Channel switch fabric set of standards (e.g., FC-SW, FC-SW-2). bridge - a device that encapsulates Fibre Channel frames within another protocol (e.g., FC-BB, FC-BB-2). gateway - a device that converts an FC-4 to another protocol (e.g., FCP to iSCSI). host - a computer system that provides end users services such as computation and storage access. storageSubsys - an integrated collection of storage controllers, storage devices, and necessary software, that provides storage services to one or more hosts. storageAccessDev - a device that provides storage management and access for heterogeneous hosts and heterogeneous devices (e.g., medium changer). nas - a device that connects to a network and provides file access services. wdmux - a device that modulates/demodulates each of several data streams (e.g., Fibre Channel protocol data streams) onto/from a different part of the light spectrum in an optical fiber. | current | |||
| CfcmHrSWInstalledIndexOrZero TEXTUAL-CONVENTION The index value for a software module's row in the Host Resources MIB's hrSWInstalledTable. A zero value indicates that no row in the hrSWInstalledTable is applicable. | current | |||
| CfcmMicroSeconds TEXTUAL-CONVENTION Time units in microseconds. | current | |||
| CfcmMilliSeconds TEXTUAL-CONVENTION Time units in milliseconds. | current | |||
| CfcmPhysicalIndexOrZero TEXTUAL-CONVENTION The index value for a physical entity's row in the Entity MIB's entPhysicalTable. A zero value indicates that no row in the entPhysicalTable is applicable. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cfcmgmtObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.999999.1 | |||
| cfcmInstanceTable OBJECT-TYPE Information about the local Fibre Channel management instances. | 1.3.6.1.4.1.9.10.999999.1.1 | not-accessible | current | |
| cfcmInstanceEntry OBJECT-TYPE A list of attributes for a particular local Fibre Channel management instance. | 1.3.6.1.4.1.9.10.999999.1.1.1 | not-accessible | current | |
| cfcmInstanceIndex OBJECT-TYPE An arbitrary integer value which uniquely identifies this instance amongst all local Fibre Channel management instances. It is mandatory that this value remain constant between restarts of the agent except, in case of certain re- configurations of the local system where it is natural for it to change. It is desirable that this value remain constant across restarts. | 1.3.6.1.4.1.9.10.999999.1.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cfcmInstanceWwn OBJECT-TYPE If the instance has one (or more) WWN(s), then this object contains that (or one of those) WWN(s). If the instance does not have a WWN associated with it, then this object contains the zero-length string. | 1.3.6.1.4.1.9.10.999999.1.1.1.2 | CfcmFcNameIdOrZero | read-only | current |
| cfcmInstanceFunctions OBJECT-TYPE One (or more) Fibre Channel unit functions being performed by this instance. | 1.3.6.1.4.1.9.10.999999.1.1.1.3 | CfcmFcUnitFunctions | read-only | current |
| cfcmInstancePhysicalIndex OBJECT-TYPE If this management instance corresponds to a physical component (or to a hierarchy of physical components), then this object's value is the value of the entPhysicalIndex of that component (or of the component at the root of that hierarchy). If there is no correspondence to a physical component (or no component which has an entPhysicalIndex value), then the value of this object is zero. | 1.3.6.1.4.1.9.10.999999.1.1.1.4 | CfcmPhysicalIndexOrZero | read-only | current |
| cfcmInstanceSoftwareIndex OBJECT-TYPE If this management instance corresponds to an installed software module, then this object's value is the value of the hrSWInstalledIndex of that module. If there is no correspondence to an installed software module (or no module which has a hrSWInstalledIndex value), then the value of this object is zero. | 1.3.6.1.4.1.9.10.999999.1.1.1.5 | CfcmHrSWInstalledIndexOrZero | read-only | current |
| cfcmInstanceStatus OBJECT-TYPE Overall status of the Fibre Channel entity/entities managed by this management instance. The value should reflect the most serious status of such entities. | 1.3.6.1.4.1.9.10.999999.1.1.1.6 | INTEGER {unknown(1), ok(2), warning(3), failed(4)} | read-only | current |
| cfcmInstanceTextName OBJECT-TYPE A textual name for this management instance and the Fibre Channel entity/entities that it is managing. | 1.3.6.1.4.1.9.10.999999.1.1.1.7 | SnmpAdminString (SIZE(0..79)) | read-write | current |
| cfcmInstanceDescr OBJECT-TYPE A textual description of this management instance and the Fibre Channel entity/entities that it is managing. | 1.3.6.1.4.1.9.10.999999.1.1.1.8 | SnmpAdminString | read-write | current |
| cfcmInstanceFabricId OBJECT-TYPE The globally unique Fabric Identifier which identifies the fabric to which the Fibre Channel entity/entities managed by this management instance are connected, or, of which they are a part. This is typically the Node WWN of the principal switch of a Fibre Channel fabric. The zero-length string indicates that the fabric identifier is unknown (or not applicable). | 1.3.6.1.4.1.9.10.999999.1.1.1.9 | CfcmFcNameIdOrZero | read-only | current |
| cfcmSwitchTable OBJECT-TYPE A table of information about Fibre Channel switches which are managed by Fibre Channel management instances. Each Fibre Channel management instance can manage one or more Fibre Channel switches. | 1.3.6.1.4.1.9.10.999999.1.2 | not-accessible | current | |
| cfcmSwitchEntry OBJECT-TYPE Information about a particular Fibre Channel switch which is managed by the management instance given by cfcmInstanceIndex. | 1.3.6.1.4.1.9.10.999999.1.2.1 | not-accessible | current | |
| cfcmSwitchIndex OBJECT-TYPE An arbitrary integer which uniquely identifies a Fibre Channel switch amongst those managed by one Fibre Channel management instance. | 1.3.6.1.4.1.9.10.999999.1.2.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cfcmSwitchDomainId OBJECT-TYPE The Domain Id of this switch. A value of zero indicates that a switch has not (yet) been assigned a Domain Id. | 1.3.6.1.4.1.9.10.999999.1.2.1.2 | CfcmDomainIdOrZero | read-write | current |
| cfcmSwitchPrincipal OBJECT-TYPE An indication of whether this switch is the principal switch within its fabric. | 1.3.6.1.4.1.9.10.999999.1.2.1.3 | TruthValue | read-only | current |
| cfcmPortTable OBJECT-TYPE Information about Fibre Channel ports. Each Fibre Channel port is represented by one entry in the IF-MIB's ifTable. | 1.3.6.1.4.1.9.10.999999.1.3 | not-accessible | current | |
| cfcmPortEntry OBJECT-TYPE Each entry contains information about a specific port. | 1.3.6.1.4.1.9.10.999999.1.3.1 | not-accessible | current | |
| cfcmPortInstanceIndex OBJECT-TYPE The value of cfcmInstanceIndex by which the Fibre Channel management instance, which manages this port, is identified in the cfcmInstanceTable. | 1.3.6.1.4.1.9.10.999999.1.3.1.1 | Unsigned32 (1..4294967295) | read-only | current |
| cfcmPortWwn OBJECT-TYPE The World Wide Name of the port, or the zero-length string if the port does not have a WWN. | 1.3.6.1.4.1.9.10.999999.1.3.1.2 | CfcmFcNameIdOrZero | read-only | current |
| cfcmPortNodeWwn OBJECT-TYPE The World Wide Name of the Node which contains this port, or the zero-length string if the port does not have a node WWN. | 1.3.6.1.4.1.9.10.999999.1.3.1.3 | CfcmFcNameIdOrZero | read-only | current |
| cfcmPortAdminType OBJECT-TYPE The administratively desired type of this port. Each port will typically only be able to support a subset of these types. | 1.3.6.1.4.1.9.10.999999.1.3.1.4 | CfcmFcPortType | read-write | current |
| cfcmPortOperType OBJECT-TYPE The current operational type of this port. | 1.3.6.1.4.1.9.10.999999.1.3.1.5 | CfcmFcPortType | read-only | current |
| cfcmPortFcCapClass OBJECT-TYPE The classes of service capability of this port. | 1.3.6.1.4.1.9.10.999999.1.3.1.6 | CfcmFcClasses | read-only | current |
| cfcmPortFcOperClass OBJECT-TYPE The classes of service that are currently operational on this port. For an FL_Port, this is the union of the classes being supported across all attached NL_Ports. | 1.3.6.1.4.1.9.10.999999.1.3.1.7 | CfcmFcClasses | read-only | current |
| cfcmPortTransmitterType OBJECT-TYPE The technology of the port transceiver. | 1.3.6.1.4.1.9.10.999999.1.3.1.8 | INTEGER {unknown(1), other(2), shortwave850nm(3), longwave1550nm(4), longwave1310nm(5), electrical(6)} | read-only | current |
| cfcmPortConnectorType OBJECT-TYPE The module type of the port connector. This object refers to the hardware implementation of the port. It will be 'embedded' if the hardware equivalent to Gigabit interface card (GBIC) is part of the line card and is unremovable. It will be 'glm' if it's a gigabit link module (GLM). It will be 'gbicSerialId' if the GBIC serial id can be read, else it will be 'gbicNoSerialId'. It will be 'sfpSerialId', if the small form factor (SFP) pluggable GBICs serial id can be read, else it will be 'sfpNoSerialId'. | 1.3.6.1.4.1.9.10.999999.1.3.1.9 | INTEGER {unknown(1), other(2), gbic(3), embedded(4), glm(5), gbicSerialId(6), gbicNoSerialId(7), sfpSerialId(8), sfpNoSerialId(9)} | read-only | current |
| cfcmPortSerialNumber OBJECT-TYPE The serial number associated with the port (e.g., for a GBIC). If not applicable, the object's value is a zero- length string. | 1.3.6.1.4.1.9.10.999999.1.3.1.10 | SnmpAdminString | read-only | current |
| cfcmPortPhysicalNumber OBJECT-TYPE This is the port's 'Physical Port Number' as defined by GS-3. | 1.3.6.1.4.1.9.10.999999.1.3.1.11 | Unsigned32 | read-only | current |
| cfcmPortAdminSpeed OBJECT-TYPE The speed of the interface: 'auto' - auto-negotiation 'tenGbs' - 10Gbs 'fourGbs' - 4Gbs 'twoGbs' - 2Gbs 'oneGbs' - 1Gbs 'halfGbs' - 500Mbs 'quarterGbs' - 250Mbs 'eighthGbs' - 125Mbs | 1.3.6.1.4.1.9.10.999999.1.3.1.12 | INTEGER {auto(1), eighthGbs(2), quarterGbs(3), halfGbs(4), oneGbs(5), twoGbs(6), fourGbs(7), tenGbs(8)} | read-write | current |
| cfcmPortCapProtocols OBJECT-TYPE A bit mask specifying the higher level protocols which are supported on this port. Note that for generic Fx_Ports, E_Ports and B_Ports, this object will indicate all protocols. | 1.3.6.1.4.1.9.10.999999.1.3.1.13 | Bits {unknown(0), loop(1), fabric(2), scsi(3), tcpIp(4), vi(5), ficon(6)} | read-only | current |
| cfcmPortOperProtocols OBJECT-TYPE A bit mask specifying the higher level protocols which are currently operational on this port. For Fx_Ports, E_Ports and B_Ports, this object will typically have the value 'unknown'. | 1.3.6.1.4.1.9.10.999999.1.3.1.14 | Bits {unknown(0), loop(1), fabric(2), scsi(3), tcpIp(4), vi(5), ficon(6)} | read-only | current |
| cfcmPortStatsTable OBJECT-TYPE A list of statistics for Fibre Channel ports. | 1.3.6.1.4.1.9.10.999999.1.4 | not-accessible | current | |
| cfcmPortStatsEntry OBJECT-TYPE An entry containing statistics for a Fibre Channel port. | 1.3.6.1.4.1.9.10.999999.1.4.1 | not-accessible | current | |
| cfcmPortBBCreditZeros OBJECT-TYPE The number of transitions in/out of the buffer-to-buffer credit zero state. The other side is not providing any credit. | 1.3.6.1.4.1.9.10.999999.1.4.1.1 | Counter64 | read-only | current |
| cfcmPortFullInputBuffers OBJECT-TYPE The number of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to zero, i.e., there became no credit to provide to other side. | 1.3.6.1.4.1.9.10.999999.1.4.1.2 | Counter64 | read-only | current |
| cfcmPortClass2RxFrames OBJECT-TYPE The number of Class 2 frames received at this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.3 | Counter64 | read-only | current |
| cfcmPortClass2RxOctets OBJECT-TYPE The number of octets contained in Class 2 frames received at this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.4 | Counter64 | read-only | current |
| cfcmPortClass2TxFrames OBJECT-TYPE The number of Class 2 frames transmitted out of this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.5 | Counter64 | read-only | current |
| cfcmPortClass2TxOctets OBJECT-TYPE The number of octets contained in Class 2 frames transmitted out of this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.6 | Counter64 | read-only | current |
| cfcmPortClass2Discards OBJECT-TYPE The number of Class 2 frames that were discarded upon reception at this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.7 | Counter64 | read-only | current |
| cfcmPortClass2RxFbsyFrames OBJECT-TYPE The number of times that F_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when either the fabric or the destination port is temporarily busy. Note that this counter will never increment for an F_Port. | 1.3.6.1.4.1.9.10.999999.1.4.1.8 | Counter64 | read-only | current |
| cfcmPortClass2RxPbsyFrames OBJECT-TYPE The number of times that P_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when the destination port is temporarily busy. | 1.3.6.1.4.1.9.10.999999.1.4.1.9 | Counter64 | read-only | current |
| cfcmPortClass2RxFrjtFrames OBJECT-TYPE The number of times that F_RJT was returned to this port as a result of a Class 2 frame that was rejected by the fabric. Note that this counter will never increment for an F_Port. | 1.3.6.1.4.1.9.10.999999.1.4.1.10 | Counter64 | read-only | current |
| cfcmPortClass2RxPrjtFrames OBJECT-TYPE The number of times that P_RJT was returned to this port as a result of a Class 2 frame that was rejected at the destination N_Port. | 1.3.6.1.4.1.9.10.999999.1.4.1.11 | Counter64 | read-only | current |
| cfcmPortClass2TxFbsyFrames OBJECT-TYPE The number of times that F_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because either the Fabric or the destination port was temporarily busy. Note that this counter will never increment for an N_Port. | 1.3.6.1.4.1.9.10.999999.1.4.1.12 | Counter64 | read-only | current |
| cfcmPortClass2TxPbsyFrames OBJECT-TYPE The number of times that P_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because the destination port was temporarily busy. Note that this counter will never increment for an F_Port. | 1.3.6.1.4.1.9.10.999999.1.4.1.13 | Counter64 | read-only | current |
| cfcmPortClass2TxFrjtFrames OBJECT-TYPE The number of times that F_RJT was generated by this port as a result of a Class 2 frame being rejected by the fabric. Note that this counter will never increment for an N_Port. | 1.3.6.1.4.1.9.10.999999.1.4.1.14 | Counter64 | read-only | current |
| cfcmPortClass2TxPrjtFrames OBJECT-TYPE The number of times that P_RJT was generated by this port as a result of a Class 2 frame being rejected at the destination N_Port. Note that this counter will never increment for an F_Port. | 1.3.6.1.4.1.9.10.999999.1.4.1.15 | Counter64 | read-only | current |
| cfcmPortClass3RxFrames OBJECT-TYPE The number of Class 3 frames received at this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.16 | Counter64 | read-only | current |
| cfcmPortClass3RxOctets OBJECT-TYPE The number of octets contained in Class 3 frames received at this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.17 | Counter64 | read-only | current |
| cfcmPortClass3TxFrames OBJECT-TYPE The number of Class 3 frames transmitted out of this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.18 | Counter64 | read-only | current |
| cfcmPortClass3TxOctets OBJECT-TYPE The number of octets contained in Class 3 frames transmitted out of this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.19 | Counter64 | read-only | current |
| cfcmPortClass3Discards OBJECT-TYPE The number of Class 3 frames that were discarded upon reception at this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.20 | Counter64 | read-only | current |
| cfcmPortClassFRxFrames OBJECT-TYPE The number of Class F frames received at this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.21 | Counter32 | read-only | current |
| cfcmPortClassFRxOctets OBJECT-TYPE The number of octets contained in Class F frames received at this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.22 | Counter32 | read-only | current |
| cfcmPortClassFTxFrames OBJECT-TYPE The number of Class F frames transmitted out of this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.23 | Counter32 | read-only | current |
| cfcmPortClassFTxOctets OBJECT-TYPE The number of octets contained in Class F frames transmitted out of this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.24 | Counter32 | read-only | current |
| cfcmPortClassFDiscards OBJECT-TYPE The number of Class F frames that were discarded upon reception at this port. | 1.3.6.1.4.1.9.10.999999.1.4.1.25 | Counter32 | read-only | current |
| cfcmPortLcStatsTable OBJECT-TYPE A list of Counter32-based statistics which are a shadow of the Counter64 statistics in the cfcmPortStatsTable, for systems which do not support Counter64. | 1.3.6.1.4.1.9.10.999999.1.5 | not-accessible | current | |
| cfcmPortLcStatsEntry OBJECT-TYPE An entry containing low-capacity (i.e., based on Counter32) statistics for a Fibre Channel port. | 1.3.6.1.4.1.9.10.999999.1.5.1 | not-accessible | current | |
| cfcmPortLcBBCreditZeros OBJECT-TYPE The number of transitions in/out of the buffer-to-buffer credit zero state. The other side is not providing any credit. | 1.3.6.1.4.1.9.10.999999.1.5.1.1 | Counter32 | read-only | current |
| cfcmPortLcFullInputBuffers OBJECT-TYPE The number of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to zero, i.e., there became no credit to provide to other side. | 1.3.6.1.4.1.9.10.999999.1.5.1.2 | Counter32 | read-only | current |
| cfcmPortLcClass2RxFrames OBJECT-TYPE The number of Class 2 frames received at this port. | 1.3.6.1.4.1.9.10.999999.1.5.1.3 | Counter32 | read-only | current |
| cfcmPortLcClass2RxOctets OBJECT-TYPE The number of octets contained in Class 2 frames received at this port. | 1.3.6.1.4.1.9.10.999999.1.5.1.4 | Counter32 | read-only | current |
| cfcmPortLcClass2TxFrames OBJECT-TYPE The number of Class 2 frames transmitted out of this port. | 1.3.6.1.4.1.9.10.999999.1.5.1.5 | Counter32 | read-only | current |
| cfcmPortLcClass2TxOctets OBJECT-TYPE The number of octets contained in Class 2 frames transmitted out of this port. | 1.3.6.1.4.1.9.10.999999.1.5.1.6 | Counter32 | read-only | current |
| cfcmPortLcClass2Discards OBJECT-TYPE The number of Class 2 frames that were discarded upon reception at this port. | 1.3.6.1.4.1.9.10.999999.1.5.1.7 | Counter32 | read-only | current |
| cfcmPortLcClass2RxFbsyFrames OBJECT-TYPE The number of times that F_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when either the fabric or the destination port is temporarily busy. Note that this counter will never increment for an F_Port. | 1.3.6.1.4.1.9.10.999999.1.5.1.8 | Counter32 | read-only | current |
| cfcmPortLcClass2RxPbsyFrames OBJECT-TYPE The number of times that P_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when the destination port is temporarily busy. | 1.3.6.1.4.1.9.10.999999.1.5.1.9 | Counter32 | read-only | current |
| cfcmPortLcClass2RxFrjtFrames OBJECT-TYPE The number of times that F_RJT was returned to this port as a result of a Class 2 frame that was rejected by the fabric. Note that this counter will never increment for an F_Port. | 1.3.6.1.4.1.9.10.999999.1.5.1.10 | Counter32 | read-only | current |
| cfcmPortLcClass2RxPrjtFrames OBJECT-TYPE The number of times that P_RJT was returned to this port as a result of a Class 2 frame that was rejected at the destination N_Port. | 1.3.6.1.4.1.9.10.999999.1.5.1.11 | Counter32 | read-only | current |
| cfcmPortLcClass2TxFbsyFrames OBJECT-TYPE The number of times that F_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because either the Fabric or the destination port was temporarily busy. Note that this counter will never increment for an N_Port. | 1.3.6.1.4.1.9.10.999999.1.5.1.12 | Counter32 | read-only | current |
| cfcmPortLcClass2TxPbsyFrames OBJECT-TYPE The number of times that P_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because the destination port was temporarily busy. Note that this counter will never increment for an F_Port. | 1.3.6.1.4.1.9.10.999999.1.5.1.13 | Counter32 | read-only | current |
| cfcmPortLcClass2TxFrjtFrames OBJECT-TYPE The number of times that F_RJT was generated by this port as a result of a Class 2 frame being rejected by the fabric. Note that this counter will never increment for an N_Port. | 1.3.6.1.4.1.9.10.999999.1.5.1.14 | Counter32 | read-only | current |
| cfcmPortLcClass2TxPrjtFrames OBJECT-TYPE The number of times that P_RJT was generated by this port as a result of a Class 2 frame being rejected at the destination N_Port. Note that this counter will never increment for an F_Port. | 1.3.6.1.4.1.9.10.999999.1.5.1.15 | Counter32 | read-only | current |
| cfcmPortLcClass3RxFrames OBJECT-TYPE The number of Class 3 frames received at this port. | 1.3.6.1.4.1.9.10.999999.1.5.1.16 | Counter32 | read-only | current |
| cfcmPortLcClass3RxOctets OBJECT-TYPE The number of octets contained in Class 3 frames received at this port. | 1.3.6.1.4.1.9.10.999999.1.5.1.17 | Counter32 | read-only | current |
| cfcmPortLcClass3TxFrames OBJECT-TYPE The number of Class 3 frames transmitted out of this port. | 1.3.6.1.4.1.9.10.999999.1.5.1.18 | Counter32 | read-only | current |
| cfcmPortLcClass3TxOctets OBJECT-TYPE The number of octets contained in Class 3 frames transmitted out of this port. | 1.3.6.1.4.1.9.10.999999.1.5.1.19 | Counter32 | read-only | current |
| cfcmPortLcClass3Discards OBJECT-TYPE The number of Class 3 frames that were discarded upon reception at this port. | 1.3.6.1.4.1.9.10.999999.1.5.1.20 | Counter32 | read-only | current |
| cfcmPortErrorsTable OBJECT-TYPE Error counters for Fibre Channel ports. | 1.3.6.1.4.1.9.10.999999.1.6 | not-accessible | current | |
| cfcmPortErrorsEntry OBJECT-TYPE Error counters for a Fibre Channel port. | 1.3.6.1.4.1.9.10.999999.1.6.1 | not-accessible | current | |
| cfcmPortRxLinkResets OBJECT-TYPE The number of Link resets (LR primitives) received. | 1.3.6.1.4.1.9.10.999999.1.6.1.1 | Counter32 | read-only | current |
| cfcmPortTxLinkResets OBJECT-TYPE The number of Link resets (LRs primitive) transmitted. | 1.3.6.1.4.1.9.10.999999.1.6.1.2 | Counter32 | read-only | current |
| cfcmPortLinkResets OBJECT-TYPE The number of times the reset link protocol was initiated on this port. This includes the number of Loop Initialization Primitive (LIP) events on an arbitrated loop port. | 1.3.6.1.4.1.9.10.999999.1.6.1.3 | Counter32 | read-only | current |
| cfcmPortRxOfflineSequences OBJECT-TYPE The number of Offline Primitive OLS received at this port. | 1.3.6.1.4.1.9.10.999999.1.6.1.4 | Counter32 | read-only | current |
| cfcmPortTxOfflineSequences OBJECT-TYPE The number of Offline Primitive OLS transmitted by this port. | 1.3.6.1.4.1.9.10.999999.1.6.1.5 | Counter32 | read-only | current |
| cfcmPortLinkFailures OBJECT-TYPE The number of link failures. This count is part of FC-PH's Link Error Status Block (LESB). | 1.3.6.1.4.1.9.10.999999.1.6.1.6 | Counter32 | read-only | current |
| cfcmPortLossofSynchs OBJECT-TYPE The number of instances of synchronization loss detected at this port. This count is part of FC-PH's Link Error Status Block (LESB). | 1.3.6.1.4.1.9.10.999999.1.6.1.7 | Counter32 | read-only | current |
| cfcmPortLossofSignals OBJECT-TYPE The number of instances of signal loss detected at this port. This count is part of FC-PH's Link Error Status Block (LESB). | 1.3.6.1.4.1.9.10.999999.1.6.1.8 | Counter32 | read-only | current |
| cfcmPortPrimSeqProtocolErrors OBJECT-TYPE The number of primitive sequence protocol errors detected at this port. This count is part of CFC-PH's Link Error Status Block (LESB). | 1.3.6.1.4.1.9.10.999999.1.6.1.9 | Counter32 | read-only | current |
| cfcmPortInvalidTxWords OBJECT-TYPE The number of invalid transmission words received at this port. This count is part of FC-PH's Link Error Status Block (LESB). | 1.3.6.1.4.1.9.10.999999.1.6.1.10 | Counter32 | read-only | current |
| cfcmPortInvalidCRCs OBJECT-TYPE The number of frames received with invalid CRC. This count is part of FC-PH's Link Error Status Block (LESB). | 1.3.6.1.4.1.9.10.999999.1.6.1.11 | Counter32 | read-only | current |
| cfcmPortInvalidOrderedSets OBJECT-TYPE The number of invalid ordered sets received at this port. | 1.3.6.1.4.1.9.10.999999.1.6.1.12 | Counter32 | read-only | current |
| cfcmPortFrameTooLongs OBJECT-TYPE The number of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of frame delimiter. | 1.3.6.1.4.1.9.10.999999.1.6.1.13 | Counter32 | read-only | current |
| cfcmPortTruncatedFrames OBJECT-TYPE The number of frames received at this port where the frame length was less than the minimum indicated by the frame header - normally 24 bytes, but it could be more if the DFCTL field indicates an optional header should have been present. | 1.3.6.1.4.1.9.10.999999.1.6.1.14 | Counter32 | read-only | current |
| cfcmPortAddressErrors OBJECT-TYPE The number of frames received with unknown addressing. e.x. unknown SID or DID. the SID or DID is not known to the routing algorithm. | 1.3.6.1.4.1.9.10.999999.1.6.1.15 | Counter32 | read-only | current |
| cfcmPortDelimiterErrors OBJECT-TYPE The number of invalid frame delimiters received at this port. An example is a frame with a class 2 start and a class 3 at the end. | 1.3.6.1.4.1.9.10.999999.1.6.1.16 | Counter32 | read-only | current |
| cfcmPortEncodingDisparityErrors OBJECT-TYPE The number of encoding disparity errors received at this port. | 1.3.6.1.4.1.9.10.999999.1.6.1.17 | Counter32 | read-only | current |
| cfcmPortOtherErrors OBJECT-TYPE The number of errors which were detected on this port but which were not counted by any other error counter in this row. | 1.3.6.1.4.1.9.10.999999.1.6.1.18 | Counter32 | read-only | current |
| cfcmFxPortTable OBJECT-TYPE Additional information about Fibre Channel ports which is specific to Fx_Ports. This table will contain one entry for each cfcmPortTable entry which represents an Fx_Port. | 1.3.6.1.4.1.9.10.999999.1.7 | not-accessible | current | |
| cfcmFxPortEntry OBJECT-TYPE Each entry contains information about FC protocol related timer values of a specific Fx_Port and information about buffer capacity, maximum data field size of frames handled by this port and other capability information. | 1.3.6.1.4.1.9.10.999999.1.7.1 | not-accessible | current | |
| cfcmFxPortRatov OBJECT-TYPE The Resource_Allocation_Timeout Value configured for this Fx_Port. This is used as the timeout value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents the Error_Detect_Timeout value (see cfcmFxPortEdtov) plus twice the maximum time that a frame may be delayed within the Fabric and still be delivered. | 1.3.6.1.4.1.9.10.999999.1.7.1.1 | CfcmMilliSeconds | read-only | current |
| cfcmFxPortEdtov OBJECT-TYPE The Error_Detect_Timeout value configured for this Fx_Port. This is used as the timeout value for detecting an error condition. | 1.3.6.1.4.1.9.10.999999.1.7.1.2 | CfcmMilliSeconds | read-only | current |
| cfcmFxPortRttov OBJECT-TYPE The Receiver_Transmitter_Timeout value of this Fx_Port. This is used by the receiver logic to detect Loss of Synchronization. | 1.3.6.1.4.1.9.10.999999.1.7.1.3 | CfcmMilliSeconds | read-only | current |
| cfcmFxPortHoldTime OBJECT-TYPE The maximum time that this Fx_Port shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that this Fx_Port does not support this parameter. | 1.3.6.1.4.1.9.10.999999.1.7.1.4 | CfcmMicroSeconds | read-only | current |
| cfcmFxPortCapBbCreditMax OBJECT-TYPE The maximum number of receive buffers which this port is capable of making available for holding frames from attached Nx_Port(s). | 1.3.6.1.4.1.9.10.999999.1.7.1.5 | CfcmFcBbCredit | read-only | current |
| cfcmFxPortCapBbCreditMin OBJECT-TYPE The minimum number of receive buffers which this port is capable of making available for holding frames from attached Nx_Port(s). | 1.3.6.1.4.1.9.10.999999.1.7.1.6 | CfcmFcBbCredit | read-only | current |
| cfcmFxPortCapDataFieldSizeMax OBJECT-TYPE The maximum size in bytes of the Data Field in a frame that this Fx_Port is capable of receiving from an attached Nx_Port. | 1.3.6.1.4.1.9.10.999999.1.7.1.7 | CfcmFcDataFieldSize | read-only | current |
| cfcmFxPortCapDataFieldSizeMin OBJECT-TYPE The minimum size in bytes of the Data Field in a frame that this Fx_Port is capable of receiving from an attached Nx_Port. | 1.3.6.1.4.1.9.10.999999.1.7.1.8 | CfcmFcDataFieldSize | read-only | current |
| cfcmFxPortCapClass2SeqDeliv OBJECT-TYPE An indication of whether this Fx_Port is capable of supporting Class 2 Sequential Delivery. | 1.3.6.1.4.1.9.10.999999.1.7.1.9 | TruthValue | read-only | current |
| cfcmFxPortCapClass3SeqDeliv OBJECT-TYPE An indication of whether this Fx_Port is capable of supporting Class 3 Sequential Delivery. | 1.3.6.1.4.1.9.10.999999.1.7.1.10 | TruthValue | read-only | current |
| cfcmFxPortCapHoldTimeMax OBJECT-TYPE The maximum holding time that this Fx_Port is capable of supporting. | 1.3.6.1.4.1.9.10.999999.1.7.1.11 | CfcmMicroSeconds | read-only | current |
| cfcmFxPortCapHoldTimeMin OBJECT-TYPE The minimum holding time that this Fx_Port is capable of supporting. | 1.3.6.1.4.1.9.10.999999.1.7.1.12 | CfcmMicroSeconds | read-only | current |
| cfcmISPortTable OBJECT-TYPE Additional information about E_Ports, B_Ports, and any other type of Fibre Channel port to which inter-switch links can be connected. This table will contain one entry for each cfcmPortTable entry which represents such a port. | 1.3.6.1.4.1.9.10.999999.1.8 | not-accessible | current | |
| cfcmISPortEntry OBJECT-TYPE Each entry contains information about a specific port connected to an inter-switch link. | 1.3.6.1.4.1.9.10.999999.1.8.1 | not-accessible | current | |
| cfcmISPortClassFCredit OBJECT-TYPE The maximum number of Class F data frames which can be transmitted by the inter-switch port without receipt of ACK or Link_Response frames. | 1.3.6.1.4.1.9.10.999999.1.8.1.1 | CfcmFcBbCredit | read-write | current |
| cfcmISPortClassFDataFieldSize OBJECT-TYPE The Receive Data Field Size which the inter-switch port has agreed to support for Class F frames to/from this port. The size specifies the largest Data Field Size for an FT_1 frame. | 1.3.6.1.4.1.9.10.999999.1.8.1.2 | CfcmFcDataFieldSize | read-only | current |
| cfcmFLoginTable OBJECT-TYPE A table that contains one entry for each Nx_Port logged- in/attached to a particular Fx_Port in the switch. Each entry contains the services parameters established during the most recent Fabric Login, explicit or implicit. Note that an Fx_Port may have one or more Nx_Ports attached to it. | 1.3.6.1.4.1.9.10.999999.1.9 | not-accessible | current | |
| cfcmFLoginEntry OBJECT-TYPE An entry containing service parameters established from a successful Fabric Login. | 1.3.6.1.4.1.9.10.999999.1.9.1 | not-accessible | current | |
| cfcmFLoginNxPortIndex OBJECT-TYPE An arbitrary integer which uniquely identifies an Nx_Port amongst all those attached to the Fx_Port indicated by ifIndex. | 1.3.6.1.4.1.9.10.999999.1.9.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cfcmFLoginPortWwn OBJECT-TYPE The port name of the attached Nx_Port, or the zero-length string if unknown. | 1.3.6.1.4.1.9.10.999999.1.9.1.2 | CfcmFcNameIdOrZero | read-only | current |
| cfcmFLoginNodeWwn OBJECT-TYPE The node name of the attached Nx_Port, or the zero-length string if unknown. | 1.3.6.1.4.1.9.10.999999.1.9.1.3 | CfcmFcNameIdOrZero | read-only | current |
| cfcmFLoginBbCreditModel OBJECT-TYPE The buffer-to-buffer credit model in use by the Fx_Port. | 1.3.6.1.4.1.9.10.999999.1.9.1.4 | CfcmFcBbCreditModel | read-only | current |
| cfcmFLoginBbCredit OBJECT-TYPE The number of buffers available for holding frames to be transmitted to the attached Nx_Port. These buffers are for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port. | 1.3.6.1.4.1.9.10.999999.1.9.1.5 | CfcmFcBbCredit | read-only | current |
| cfcmFLoginClassesAgreed OBJECT-TYPE The Classes of Service which the Fx_Port has agreed to support for this Nx_Port. | 1.3.6.1.4.1.9.10.999999.1.9.1.6 | CfcmFcClasses | read-only | current |
| cfcmFLoginClass2SeqDelivAgreed OBJECT-TYPE An indication of whether the Fx_Port has agreed to support Class 2 sequential delivery for this Nx_Port. This is only meaningful if Class 2 service has been agreed. | 1.3.6.1.4.1.9.10.999999.1.9.1.7 | TruthValue | read-only | current |
| cfcmFLoginClass2DataFieldSize OBJECT-TYPE The Receive Data Field Size which the Fx_Port has agreed to support for Class 2 frames to/from this Nx_Port. The size specifies the largest Data Field Size for an FT_1 frame. This is only meaningful if Class 2 service has been agreed. | 1.3.6.1.4.1.9.10.999999.1.9.1.8 | CfcmFcDataFieldSize | read-only | current |
| cfcmFLoginClass3SeqDelivAgreed OBJECT-TYPE An indication of whether the Fx_Port has agreed to support Class 3 sequential delivery for this Nx_Port. This is only meaningful if Class 3 service has been agreed. | 1.3.6.1.4.1.9.10.999999.1.9.1.9 | TruthValue | read-only | current |
| cfcmFLoginClass3DataFieldSize OBJECT-TYPE The Receive Data Field Size which the Fx_Port has agreed to support for Class 3 frames to/from this Nx_Port. The size specifies the largest Data Field Size for an FT_1 frame. This is only meaningful if Class 3 service has been agreed. | 1.3.6.1.4.1.9.10.999999.1.9.1.10 | CfcmFcDataFieldSize | read-only | current |
| cfcmLinkTable OBJECT-TYPE A table containing any Fibre Channel link information which is known to local Fibre Channel managed instances. One end of such a link is typically at a local port, but the table can also contain information on links for which neither end is a local port. If one end of a link terminates locally, then that end is termed 'end1'; the other end is termed 'end2'. | 1.3.6.1.4.1.9.10.999999.1.10 | not-accessible | current | |
| cfcmLinkEntry OBJECT-TYPE An entry containing information which a particular Fibre Channel managed instance has about a Fibre Channel link. The two ends of the link are called 'end1' and 'end2'. | 1.3.6.1.4.1.9.10.999999.1.10.1 | not-accessible | current | |
| cfcmLinkIndex OBJECT-TYPE An arbitrary integer which uniquely identifies one link within the set of links about which a particular managed instance has information. | 1.3.6.1.4.1.9.10.999999.1.10.1.1 | Unsigned32 | not-accessible | current |
| cfcmLinkEnd1NodeWwn OBJECT-TYPE The node name of end1, or the zero-length string if unknown. | 1.3.6.1.4.1.9.10.999999.1.10.1.2 | CfcmFcNameIdOrZero | read-only | current |
| cfcmLinkEnd1PhysPortNumber OBJECT-TYPE The physical port number of end1, or zero if unknown. | 1.3.6.1.4.1.9.10.999999.1.10.1.3 | Unsigned32 | read-only | current |
| cfcmLinkEnd1PortWwn OBJECT-TYPE The port WWN of end1, or the zero-length string if unknown. ('end1' is local if this value is equal to the value of cfcmPortWwn in one of the rows of the cfcmPortTable.) | 1.3.6.1.4.1.9.10.999999.1.10.1.4 | CfcmFcNameIdOrZero | read-only | current |
| cfcmLinkEnd2NodeWwn OBJECT-TYPE The node name of end2, or the zero-length string if unknown. | 1.3.6.1.4.1.9.10.999999.1.10.1.5 | CfcmFcNameIdOrZero | read-only | current |
| cfcmLinkEnd2PhysPortNumber OBJECT-TYPE The physical port number of end2, or zero if unknown. | 1.3.6.1.4.1.9.10.999999.1.10.1.6 | Unsigned32 | read-only | current |
| cfcmLinkEnd2PortWwn OBJECT-TYPE The port WWN of end2, or the zero-length string if unknown. | 1.3.6.1.4.1.9.10.999999.1.10.1.7 | CfcmFcNameIdOrZero | read-only | current |
| cfcmLinkEnd2AgentAddress OBJECT-TYPE The address of the SNMP agent for the Fibre Channel Interconnect Element or Platform of which end2 is a part. If the address is unknown, the value of this object is the zero-length string. | 1.3.6.1.4.1.9.10.999999.1.10.1.8 | SnmpAdminString | read-only | current |
| cfcmLinkEnd2PortType OBJECT-TYPE The port type of end2. | 1.3.6.1.4.1.9.10.999999.1.10.1.9 | CfcmFcPortType | read-only | current |
| cfcmLinkEnd2UnitType OBJECT-TYPE The type of/function(s) performed by the Fibre Channel Interconnect Element or Platform of which end2 is a part. | 1.3.6.1.4.1.9.10.999999.1.10.1.10 | CfcmFcUnitFunctions | read-only | current |
| cfcmLinkEnd2FcAddressId OBJECT-TYPE The Fibre Channel Address ID of end2, or the zero-length string if unknown. | 1.3.6.1.4.1.9.10.999999.1.10.1.11 | CfcmFcAddressId | read-only | current |
| cfcmgmtNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.999999.2 | |||
| cfcmgmtNotifPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.999999.2.0 | |||
| cfcmgmtConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.999999.3 | |||
| cfcmgmtCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.999999.3.1 | |||
| cfcmgmtGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.999999.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cfcmgmtCompliance MODULE-COMPLIANCE Describes the requirements for compliance to this Fibre Channel Management MIB. | 1.3.6.1.4.1.9.10.999999.3.1.1 | current |
| cfcmInstanceBasicGroup OBJECT-GROUP Basic information about Fibre Channel managed instances. | 1.3.6.1.4.1.9.10.999999.3.2.1 | current |
| cfcmSwitchBasicGroup OBJECT-GROUP Basic information about Fibre Channel switches. | 1.3.6.1.4.1.9.10.999999.3.2.2 | current |
| cfcmPortBasicGroup OBJECT-GROUP Basic information about Fibre Channel ports. | 1.3.6.1.4.1.9.10.999999.3.2.3 | current |
| cfcmPortStatsGroup OBJECT-GROUP Traffic statistics, which are not specific to any one class of service, for Fibre Channel ports. | 1.3.6.1.4.1.9.10.999999.3.2.4 | current |
| cfcmPortClass23StatsGroup OBJECT-GROUP Traffic statistics for Class 2 and Class 3 traffic on Fibre Channel ports. | 1.3.6.1.4.1.9.10.999999.3.2.5 | current |
| cfcmPortClassFStatsGroup OBJECT-GROUP Traffic statistics for Class F traffic on Fibre Channel ports. | 1.3.6.1.4.1.9.10.999999.3.2.6 | current |
| cfcmPortLcStatsGroup OBJECT-GROUP Low-capacity (32-bit) statistics for Fibre Channel ports. | 1.3.6.1.4.1.9.10.999999.3.2.7 | current |
| cfcmPortErrorsGroup OBJECT-GROUP Error statistics for Fibre Channel ports. | 1.3.6.1.4.1.9.10.999999.3.2.8 | current |
| cfcmSwitchPortGroup OBJECT-GROUP Information about ports on a Fibre Channel switch. | 1.3.6.1.4.1.9.10.999999.3.2.9 | current |
| cfcmSwitchLoginGroup OBJECT-GROUP Information known to a Fibre Channel switch about attached/logged-in Nx_Ports. | 1.3.6.1.4.1.9.10.999999.3.2.10 | current |
| cfcmLinkBasicGroup OBJECT-GROUP Information about Fibre Channel links. | 1.3.6.1.4.1.9.10.999999.3.2.11 | current |