CISCO-ES-STACK-MIB
- Registered at
- 1.3.6.1.4.1.9.5.14.11.3.6.1.4.1.9.5.14.21.3.6.1.4.1.9.5.14.31.3.6.1.4.1.9.5.14.41.3.6.1.4.1.9.5.14.51.3.6.1.4.1.9.5.14.61.3.6.1.4.1.9.5.14.71.3.6.1.4.1.9.5.14.81.3.6.1.4.1.9.5.14.9
- Namespace
- cisco
- Source file
CISCO-ES-STACK-MIB- Digest
sha256:50054381cac79731b903b83da3261869d9d1b5764e6f0c9966cc2c152761e1a1
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-MIB | sysLocation, sysName |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-ES-STACK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| BridgeId type | ||||
| MacAddr type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cisco OBJECT-IDENTITY | 1.3.6.1.4.1.9 | |||
| workgroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.5 | |||
| esStack OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14 | |||
| ciscoEsMain OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14.1 | |||
| ciscoEsConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14.1.1 | |||
| ciscoEsIpAddr OBJECT-TYPE The IP address of the current vlan. | 1.3.6.1.4.1.9.5.14.1.1.1 | IpAddress | read-write | mandatory |
| ciscoEsNetMask OBJECT-TYPE The subnet mask of the current vlan. | 1.3.6.1.4.1.9.5.14.1.1.2 | IpAddress | read-write | mandatory |
| ciscoEsDefaultGateway OBJECT-TYPE IP default gateway of the current vlan. | 1.3.6.1.4.1.9.5.14.1.1.3 | IpAddress | read-write | mandatory |
| ciscoEsSysCurTime OBJECT-TYPE Current time at the switch. To set the time use the format yyyy mm dd hh mm ss. All fields are required. Setting this object will reset the time in all the switches in the stack to the new value. | 1.3.6.1.4.1.9.5.14.1.1.4 | DisplayString (SIZE(1..128)) | read-write | mandatory |
| ciscoEsConfiguration OBJECT-TYPE The stack configuration of the system. A system can exist in three possible configurations. 1. Stand alone mode where the system has only one switch and is not connected to any other switches. 2. Back to Back mode in which a pair of switches are connected back to back through Stack Port. 3. Matrix mode in which the stack has up to eight switches connected to a Matrix through the Stack Port. | 1.3.6.1.4.1.9.5.14.1.1.5 | INTEGER {stand-alone(1), back-to-back(2), prostack-matrix(3)} | read-only | mandatory |
| ciscoEsNumSwitches OBJECT-TYPE Total number of switches in the stack. | 1.3.6.1.4.1.9.5.14.1.1.6 | INTEGER | read-only | mandatory |
| ciscoEsStackStatus OBJECT-TYPE Stack status indicates if the stack is going through the Stack Management Update protocol. Management stations should check this status if they receive a generr on a SET request for any of the stack wide attributes. | 1.3.6.1.4.1.9.5.14.1.1.7 | INTEGER {running(1), updating(2)} | read-only | mandatory |
| ciscoEsTftpServer OBJECT-TYPE TFTP sever's IP address. | 1.3.6.1.4.1.9.5.14.1.1.8 | IpAddress | read-write | mandatory |
| ciscoEsTftpServerDomain OBJECT-TYPE VLAN to which the server is connected. | 1.3.6.1.4.1.9.5.14.1.1.9 | INTEGER (0..63) | read-write | mandatory |
| ciscoEsTftpFileLoc OBJECT-TYPE Location of the binary file on the server. | 1.3.6.1.4.1.9.5.14.1.1.10 | DisplayString (SIZE(0..256)) | read-write | mandatory |
| ciscoEsSetLock OBJECT-TYPE This object has not been in use since 2.0 release and there are currently no plans to implement it as defined below. This object when set to the manager's IP address locks out every other manager from doing any SET operations. This lock out expires after a fixed interval of 5 minutes. The Manager holding the lock can renew the lock by doing SET on this object again before the timeout expires otherwise it will contend with other managers trying to lock. The IP Address value should match the IP address that the manager uses to generate the SET request. | 1.3.6.1.4.1.9.5.14.1.1.11 | IpAddress | read-write | mandatory |
| ciscoEsProStackMatrixStatus OBJECT-TYPE Active Matrix module in the stack. This object is set to none if the switch is not connected to a Matrix. | 1.3.6.1.4.1.9.5.14.1.1.12 | INTEGER {primary(1), secondary(2), none(3), failed(4)} | read-only | mandatory |
| ciscoEsNumMatrixModules OBJECT-TYPE Number of Matrix modules in the stack. This object is set to zero if the switch is not connected to a Matrix. | 1.3.6.1.4.1.9.5.14.1.1.13 | INTEGER | read-only | mandatory |
| ciscoEsLLPortDsbld OBJECT-TYPE This OID is sent out along with the LINK_DOWN Trap only when the port is disabled due to the port security feature (learn and lock). Port could be disabled due to the discovery of invalid MAC address. | 1.3.6.1.4.1.9.5.14.1.1.14 | INTEGER {disabled(1)} | read-only | mandatory |
| ciscoEsTrapRcvrTable OBJECT-TYPE Trap Receiver Table for each vlan. | 1.3.6.1.4.1.9.5.14.1.1.25 | not-accessible | mandatory | |
| ciscoEsTrapRcvrEntry OBJECT-TYPE Definition of each row in the vlan specific trap receiver table. | 1.3.6.1.4.1.9.5.14.1.1.25.1 | not-accessible | mandatory | |
| ciscoEsTrapRcvrIndex OBJECT-TYPE Trap receiver index for each entry. | 1.3.6.1.4.1.9.5.14.1.1.25.1.1 | INTEGER (1..20) | read-only | mandatory |
| ciscoEsTrapRcvrStatus OBJECT-TYPE Setting the value of this object to invalid(3) deletes the row from the table. The value invalid(3) should never be returned on a GET. Setting this value to create(4) causes a new row to be created if the row does not already exist. To create a new row set ciscoEsTrapRcvrStatus to create(4) and ciscoEsTrapRcvrIndex to any valid index which does not already exist. The value returned on GETs should be valid(2) or other(1), which is used to indicate any other condition. | 1.3.6.1.4.1.9.5.14.1.1.25.1.2 | INTEGER {other(1), valid(2), invalid(3), create(4)} | read-write | mandatory |
| ciscoEsTrapRcvrIpAddress OBJECT-TYPE IP address for an SNMP manager that is to receive the trap. | 1.3.6.1.4.1.9.5.14.1.1.25.1.3 | IpAddress | read-write | mandatory |
| ciscoEsTrapRcvrComm OBJECT-TYPE Community string to use. | 1.3.6.1.4.1.9.5.14.1.1.25.1.4 | DisplayString (SIZE(1..16)) | read-write | mandatory |
| ciscoEsTrapRcvrVLANs OBJECT-TYPE VLANs to which traps to this target are sent out on. Each octet within the value of this object specifies a set of eight vlans, with the first octet specifying vlans 0 through 7, the second octet specifying vlans 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered vlan, and the least significant bit represents the highest numbered vlan. Thus, each vlan of the stack is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is included in the set of ports; the vlan is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.5.14.1.1.25.1.5 | OCTET STRING (SIZE(128)) | read-write | mandatory |
| ciscoEsStack OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14.2 | |||
| ciscoEsStackTable OBJECT-TYPE Stack information table. This table provides the current configuration of the stack. It also provides a mapping of Switch Numbers to their addresses. The Management Application is required to retrieve this table and verify its own view of the stack periodically and/or when it receives a trap indicating a change in the stack configuration. | 1.3.6.1.4.1.9.5.14.2.1 | not-accessible | mandatory | |
| ciscoEsStackEntry OBJECT-TYPE Definition of each row in the Stack Table | 1.3.6.1.4.1.9.5.14.2.1.1 | not-accessible | mandatory | |
| ciscoEsStackSwitchNumber OBJECT-TYPE Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back. | 1.3.6.1.4.1.9.5.14.2.1.1.1 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsStackSwitchAddr OBJECT-TYPE Mac address of the switch. | 1.3.6.1.4.1.9.5.14.2.1.1.2 | MacAddr | read-only | mandatory |
| ciscoEsStackSwitchFwVersion OBJECT-TYPE Version number for the firmware running on the switch. | 1.3.6.1.4.1.9.5.14.2.1.1.3 | DisplayString (SIZE(1..128)) | read-only | mandatory |
| ciscoEsStackSwitchHwVersion OBJECT-TYPE Hardware version number for the switch. | 1.3.6.1.4.1.9.5.14.2.1.1.4 | DisplayString (SIZE(1..128)) | read-only | mandatory |
| ciscoEsStackSwitchUptime OBJECT-TYPE Time ticks since the switch was last reset. | 1.3.6.1.4.1.9.5.14.2.1.1.6 | TimeTicks | read-only | mandatory |
| ciscoEsStackSwitchStatus OBJECT-TYPE Operational status of the box. Setting this value to either coldReset (2) or warmReset (3) will cause cold start or warm start to occur after a specific time delay. | 1.3.6.1.4.1.9.5.14.2.1.1.7 | INTEGER {running(1), coldReset(2), warmReset(3)} | read-write | mandatory |
| ciscoEsStackSwitchTemperature OBJECT-TYPE Temperature status of each switch. | 1.3.6.1.4.1.9.5.14.2.1.1.8 | INTEGER {normal(1), toohigh(2), unknown(3)} | read-only | mandatory |
| ciscoEsStackSwitchMemory OBJECT-TYPE Installed memory on the switch in MB. | 1.3.6.1.4.1.9.5.14.2.1.1.9 | INTEGER | read-only | mandatory |
| ciscoEsStackSwitchProbe OBJECT-TYPE Port number to be monitored through the SwitchProbe. Setting this object to zero turns off SwitchProbe. | 1.3.6.1.4.1.9.5.14.2.1.1.10 | INTEGER (0..32) | read-write | mandatory |
| ciscoEsStackSwitchProbeDirection OBJECT-TYPE Direction of traffic to monitor on the SwitchProbe. | 1.3.6.1.4.1.9.5.14.2.1.1.11 | INTEGER {transmit(1), receive(2), both(3), none(4)} | read-write | mandatory |
| ciscoEsStackSwitchFeatureStatus OBJECT-TYPE This object indicates whether the switch is enabled to support enhanced features. | 1.3.6.1.4.1.9.5.14.2.1.1.12 | INTEGER {standard(1), enhanced(2), unknown(3)} | read-only | mandatory |
| ciscoEsStackSwitchFeatureKey OBJECT-TYPE Feature key to enable enhanced features. | 1.3.6.1.4.1.9.5.14.2.1.1.13 | INTEGER | read-write | mandatory |
| ciscoEsStackSwitchPorts OBJECT-TYPE A bit mask representing all the ports present in this switch. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.5.14.2.1.1.14 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| ciscoEsStackSwitchAgingTime OBJECT-TYPE Aging time in minutes for the master address table entries on this switch. | 1.3.6.1.4.1.9.5.14.2.1.1.15 | INTEGER (0..9999) | read-write | mandatory |
| ciscoEsStackSwitchAgingLevel OBJECT-TYPE Threshold to demand age the master address table. All numbers refer to percentage of the address table. The only values accepted by the agent are 50,60,70,80,90 and 0. Setting the value to 0 disables demand aging. | 1.3.6.1.4.1.9.5.14.2.1.1.16 | INTEGER (0..90) | read-write | mandatory |
| ciscoEsStackSwitchBufferOverruns OBJECT-TYPE Number of times the switch was out of buffers. | 1.3.6.1.4.1.9.5.14.2.1.1.17 | Counter | read-only | mandatory |
| ciscoEsStackSwitchSoftwareFrames OBJECT-TYPE Total number of frames sent to the CPU on this switch. | 1.3.6.1.4.1.9.5.14.2.1.1.18 | Counter | read-only | mandatory |
| ciscoEsStackSwitchInErrFrames OBJECT-TYPE Total number of frames in error on this switch. | 1.3.6.1.4.1.9.5.14.2.1.1.19 | Counter | read-only | mandatory |
| ciscoEsStackSwitchInShortFrames OBJECT-TYPE Total number of frames which were too short received on this switch. | 1.3.6.1.4.1.9.5.14.2.1.1.20 | Counter | read-only | mandatory |
| ciscoEsStackSwitchInLongFrames OBJECT-TYPE Total number of frames which were too long received on this switch. | 1.3.6.1.4.1.9.5.14.2.1.1.21 | Counter | read-only | mandatory |
| ciscoEsStackSwitchOutDroppedFrames OBJECT-TYPE Total number of received frames dropped by switch. | 1.3.6.1.4.1.9.5.14.2.1.1.22 | Counter | read-only | mandatory |
| ciscoEsStackSwitchInNoSpaceFrames OBJECT-TYPE Number of times incoming frames had to be dropped because of no more memory available. | 1.3.6.1.4.1.9.5.14.2.1.1.23 | Counter | read-only | mandatory |
| ciscoEsStackSwitchOutTotalReqs OBJECT-TYPE Total number of requests made by the CPU to send out a frame. | 1.3.6.1.4.1.9.5.14.2.1.1.24 | Counter | read-only | mandatory |
| ciscoEsStackSwitchOutTotalFrames OBJECT-TYPE Total number of frames sent out from this switch requested by the CPU. | 1.3.6.1.4.1.9.5.14.2.1.1.25 | Counter | read-only | mandatory |
| ciscoEsStackSwitchLongestHashChain OBJECT-TYPE The length of the longest hash chain in the CPU hash table. | 1.3.6.1.4.1.9.5.14.2.1.1.26 | Gauge | read-only | mandatory |
| ciscoEsStackSwitchHashTableFulls OBJECT-TYPE Total number of times the hash table was full when trying to add an entry. | 1.3.6.1.4.1.9.5.14.2.1.1.27 | Counter | read-only | mandatory |
| ciscoEsStackSwitchId OBJECT-TYPE The switch Id used to uniquely identify the kind of the cisco ethernet switch. | 1.3.6.1.4.1.9.5.14.2.1.1.28 | OBJECT IDENTIFIER | read-only | mandatory |
| ciscoEsStackSwitchDplxCtrl OBJECT-TYPE Control of setting the ports to full or half duplex. | 1.3.6.1.4.1.9.5.14.2.1.1.29 | INTEGER {hardware(1), software(2)} | read-write | mandatory |
| ciscoEsModule OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14.3 | |||
| ciscoEsModTable OBJECT-TYPE Module configuration table. Each EtherSwitch the set of 10 MB Ports is considered as slot 1. Each additional card which plugs into the system is numbered based on where the card is plugged into. | 1.3.6.1.4.1.9.5.14.3.1 | not-accessible | mandatory | |
| ciscoEsModEntry OBJECT-TYPE Definition of each row in the Module Table | 1.3.6.1.4.1.9.5.14.3.1.1 | not-accessible | mandatory | |
| ciscoEsModSwitchNumber OBJECT-TYPE Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back. | 1.3.6.1.4.1.9.5.14.3.1.1.1 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsModNumber OBJECT-TYPE The module number. | 1.3.6.1.4.1.9.5.14.3.1.1.2 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsModState OBJECT-TYPE The state indicates the current operational state of the module. | 1.3.6.1.4.1.9.5.14.3.1.1.3 | INTEGER {nomodule(1), running(2), stopped(3), faulty(4)} | read-only | mandatory |
| ciscoEsModType OBJECT-TYPE The type of module plugged in to the slot. Module type system (1) represents the mother board with the CPU and system memory. In RSM the system module always occupies slot 2. Module state none (6) represents a slot with no modules plugged in (indicated by ciscoEsModState). | 1.3.6.1.4.1.9.5.14.3.1.1.4 | INTEGER {system(1), ws-X3004(2), ws-X3001(3), ws-X3005(4), ws-X3002(5), ws-X3013(6), ws-X3003(7), ws-X3006(8), unknown(9), none(10), ws-X3007-8(11), ws-X3009(12), ws-X3010(13), ws-X3011(14)} | read-only | mandatory |
| ciscoEsModRevision OBJECT-TYPE The module revision number. | 1.3.6.1.4.1.9.5.14.3.1.1.5 | INTEGER | read-only | mandatory |
| ciscoEsModNumPorts OBJECT-TYPE Total number of ports in the module. | 1.3.6.1.4.1.9.5.14.3.1.1.6 | INTEGER | read-only | mandatory |
| ciscoEsModUptime OBJECT-TYPE Time in 1/100 seconds since the module was last reset. | 1.3.6.1.4.1.9.5.14.3.1.1.7 | TimeTicks | read-only | mandatory |
| ciscoEsPort OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14.4 | |||
| ciscoEsPortTable OBJECT-TYPE A table of information about each port. For Cisco ports only the following Counters are valid: ciscoEsPortInFrames ciscoEsPortOutFrames ciscoEsPortInOctets ciscoEsPortOutOctets ciscoEsPortLongFrames ciscoEsPortShortFrames ciscoEsPortSWHandledFrames ciscoEsPortInBufOverflows ciscoEsPortOutBufOverflows ciscoEsPortPktsInErrors ciscoEsPortForwardedFrames All other Counters will return 0 for such ports. | 1.3.6.1.4.1.9.5.14.4.1 | not-accessible | mandatory | |
| ciscoEsPortEntry OBJECT-TYPE Definition of rows in the port table. | 1.3.6.1.4.1.9.5.14.4.1.1 | not-accessible | mandatory | |
| ciscoEsPortSwitchNumber OBJECT-TYPE Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back. | 1.3.6.1.4.1.9.5.14.4.1.1.1 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsPortNumber OBJECT-TYPE A unique value for each port entry. The value corresponds the port number. | 1.3.6.1.4.1.9.5.14.4.1.1.2 | INTEGER (1..32) | read-only | mandatory |
| ciscoEsPortModNumber OBJECT-TYPE Module number of the module that contains this port. | 1.3.6.1.4.1.9.5.14.4.1.1.3 | INTEGER (1..4) | read-only | mandatory |
| ciscoEsPortIfIndex OBJECT-TYPE A pointer to the entry in the ifTable corresponding to this port. | 1.3.6.1.4.1.9.5.14.4.1.1.4 | INTEGER | read-only | mandatory |
| ciscoEsPortDuplex OBJECT-TYPE Indicates whether the port is jumper configured for full or half duplex operation. Note: internal connected ports are always halfDuplex(2). | 1.3.6.1.4.1.9.5.14.4.1.1.5 | INTEGER {fullDuplex(1), halfDuplex(2)} | read-write | mandatory |
| ciscoEsPortRcvLocalFrames OBJECT-TYPE Number of frames received where the destination is on this port. | 1.3.6.1.4.1.9.5.14.4.1.1.6 | Counter | read-only | mandatory |
| ciscoEsPortForwardedFrames OBJECT-TYPE Number of frames received on this port and forwarded to another port or the system module for processing. | 1.3.6.1.4.1.9.5.14.4.1.1.7 | Counter | read-only | mandatory |
| ciscoEsPortMostStations OBJECT-TYPE Highest number of stations ever active at any time since the last reset of the switch as seen by this port. | 1.3.6.1.4.1.9.5.14.4.1.1.8 | Counter | read-only | mandatory |
| ciscoEsPortMaxStations OBJECT-TYPE Maximum number of stations which the port can support simultaneously. | 1.3.6.1.4.1.9.5.14.4.1.1.9 | Counter | read-only | mandatory |
| ciscoEsPortSWHandledFrames OBJECT-TYPE Number of Frames received on this port and delivered to the system module for processing. | 1.3.6.1.4.1.9.5.14.4.1.1.10 | Counter | read-only | mandatory |
| ciscoEsPortLocalStations OBJECT-TYPE Number of stations on this port which belong to the local segment. | 1.3.6.1.4.1.9.5.14.4.1.1.11 | Counter | read-only | mandatory |
| ciscoEsPortRemoteStations OBJECT-TYPE Number of stations on this port which belong to another segment. | 1.3.6.1.4.1.9.5.14.4.1.1.12 | Counter | read-only | mandatory |
| ciscoEsPortUnknownStaFrames OBJECT-TYPE Number of unicast frames received on this port and forwarded to the system module for processing because the source or destination station address is not in the port's forwarding table. | 1.3.6.1.4.1.9.5.14.4.1.1.13 | Counter | read-only | mandatory |
| ciscoEsPortResetStats OBJECT-TYPE Setting this object to reset(3) causes all traffic counters for this port to be set to zero. Also the value of ciscoEsPortResetTimer is set to zero. | 1.3.6.1.4.1.9.5.14.4.1.1.14 | INTEGER {other(1), running(2), reset(3)} | read-write | mandatory |
| ciscoEsPortResetTimer OBJECT-TYPE Time (in 100th second ticks) since the port counters were reset. | 1.3.6.1.4.1.9.5.14.4.1.1.15 | TimeTicks | read-only | mandatory |
| ciscoEsPortResetAddrs OBJECT-TYPE Setting this object to reset(3) clears all address table entries for this port as well as setting all port traffic counters to zero and setting ciscoEsPortResetTimer to zero. | 1.3.6.1.4.1.9.5.14.4.1.1.16 | INTEGER {other(1), running(2), reset(3)} | read-write | mandatory |
| ciscoEsPortInFrames OBJECT-TYPE Total Number of Frames received on this port. | 1.3.6.1.4.1.9.5.14.4.1.1.17 | Counter | read-only | mandatory |
| ciscoEsPortOutFrames OBJECT-TYPE Total Number of Frames transmitted by this port. | 1.3.6.1.4.1.9.5.14.4.1.1.18 | Counter | read-only | mandatory |
| ciscoEsPortLongFrames OBJECT-TYPE Total Number of Frames received on this port which were too long. | 1.3.6.1.4.1.9.5.14.4.1.1.19 | Counter | read-only | mandatory |
| ciscoEsPortShortFrames OBJECT-TYPE Total Number of Frames received on this port which were too short. | 1.3.6.1.4.1.9.5.14.4.1.1.20 | Counter | read-only | mandatory |
| ciscoEsPortInBufOverflows OBJECT-TYPE Total Number of Frames received on this port which caused a receive buffer overflow. | 1.3.6.1.4.1.9.5.14.4.1.1.21 | Counter | read-only | mandatory |
| ciscoEsPortOutBufOverflows OBJECT-TYPE Total Number of Frames which could not be transmitted from this port because of transmit buffer overflow. | 1.3.6.1.4.1.9.5.14.4.1.1.22 | Counter | read-only | mandatory |
| ciscoEsPortRcvBcasts OBJECT-TYPE Number of Broadcast Frames received on this port without errors. | 1.3.6.1.4.1.9.5.14.4.1.1.23 | Counter | read-only | mandatory |
| ciscoEsPortRcvMcasts OBJECT-TYPE Number of Multicast Frames received on this port without errors. | 1.3.6.1.4.1.9.5.14.4.1.1.24 | Counter | read-only | mandatory |
| ciscoEsPortSwitchedFrames OBJECT-TYPE Number of frames switched on this port. | 1.3.6.1.4.1.9.5.14.4.1.1.25 | Counter | read-only | mandatory |
| ciscoEsPortInOctets OBJECT-TYPE Total number of octets received through this port. This counter is the same as the ifInOctets counter in ifTable corresponding to this port. | 1.3.6.1.4.1.9.5.14.4.1.1.26 | Counter | read-only | mandatory |
| ciscoEsPortOutOctets OBJECT-TYPE Total number of octets transmitted from this port. This counter is the same as the ifOutOctets counter in ifTable corresponding to this port. | 1.3.6.1.4.1.9.5.14.4.1.1.27 | Counter | read-only | mandatory |
| ciscoEsPortPktsInErrors OBJECT-TYPE Total number of packets received or transmitted from this port and there was an error. | 1.3.6.1.4.1.9.5.14.4.1.1.28 | Counter | read-only | mandatory |
| ciscoEsPortLinkState OBJECT-TYPE Link state of the port. | 1.3.6.1.4.1.9.5.14.4.1.1.29 | INTEGER {up(1), down(2)} | read-only | mandatory |
| ciscoEsPortOprStatus OBJECT-TYPE Operational status of the port. Failed is returned when the the port fails power-on diagnostic tests. | 1.3.6.1.4.1.9.5.14.4.1.1.30 | INTEGER {enabled(1), disabled(2), failed(3)} | read-write | mandatory |
| ciscoEsPortMdiMdix OBJECT-TYPE Indicates whether the port is configured as MDI or MDIX or none (meaning not applicable). This object is also used to show the termination status for 10Base2 type ports. | 1.3.6.1.4.1.9.5.14.4.1.1.31 | INTEGER {mdi(1), mdix(2), none(3), internal-term-on(4), internal-term-off(5)} | read-only | mandatory |
| ciscoEsPortHashOverflows OBJECT-TYPE Number of times a hash bucket was full when trying to add an entry to the port address table. | 1.3.6.1.4.1.9.5.14.4.1.1.32 | Counter | read-only | mandatory |
| ciscoEsPortTableOverflows OBJECT-TYPE Number of times the address table was full when trying to add an entry to the port address table. | 1.3.6.1.4.1.9.5.14.4.1.1.33 | Counter | read-only | mandatory |
| ciscoEsPortAddrAgingTime OBJECT-TYPE Port level address aging time in minutes. Setting this object to zero disables address aging. | 1.3.6.1.4.1.9.5.14.4.1.1.34 | INTEGER (0..9999) | read-write | mandatory |
| ciscoEsPortDemandAgingLevel OBJECT-TYPE Threshold to demand age the port address table. All numbers refer to percentage of the address table. The only values accepted by the agent are 50,60,70,80,90 and 0. Setting the value to 0 disables demand aging. | 1.3.6.1.4.1.9.5.14.4.1.1.35 | INTEGER (0..90) | read-write | mandatory |
| ciscoEsPortCfgMode OBJECT-TYPE Set bridging mode for the port. | 1.3.6.1.4.1.9.5.14.4.1.1.36 | INTEGER {ieee8021d(1), cutthru(2), auto(3)} | read-write | mandatory |
| ciscoEsPortActiveMode OBJECT-TYPE Operational bridging mode for the port. | 1.3.6.1.4.1.9.5.14.4.1.1.37 | INTEGER {ieee8021d(1), cutthru(2), unknown(3)} | read-only | mandatory |
| ciscoEsPortErrThreshold OBJECT-TYPE Threshold error rate when the port moves from cut-through to store and forward mode. | 1.3.6.1.4.1.9.5.14.4.1.1.38 | INTEGER (0..100) | read-write | mandatory |
| ciscoEsPortLearningState OBJECT-TYPE Configure learning state on this port. | 1.3.6.1.4.1.9.5.14.4.1.1.39 | INTEGER {normal(1), disableSrcLearning(2), disableDstnLearning(3), disableLearning(4)} | read-write | mandatory |
| ciscoEsPortRuntlessMode OBJECT-TYPE Turn on/off runtless filtering on this port. When this this mode is turned on, no runts will be forwarded. | 1.3.6.1.4.1.9.5.14.4.1.1.40 | INTEGER {on(1), off(2)} | read-write | mandatory |
| ciscoEsPortType OBJECT-TYPE Type of port. | 1.3.6.1.4.1.9.5.14.4.1.1.41 | INTEGER {type-10BaseT(1), type-StkPort(2), type-100BaseT(3), type-100BaseFx(4), type-10BaseT-4(5), type-10Base2(6), type-10BaseFL(7), type-ATM155(8), unknown(9), type-100VG-Fx(10), type-100VG-Tx(11), type-ISL-FX(12), type-ISL-TX(13), type-R2503(14)} | read-only | mandatory |
| ciscoEsPortCDPTimeToLive OBJECT-TYPE The advertised time-to-live parameter on all CDP messages generated by this switch on this vlan. | 1.3.6.1.4.1.9.5.14.4.1.1.42 | INTEGER (0..255) | read-write | mandatory |
| ciscoEsPortFastPort OBJECT-TYPE Indicates whether the port is enable or disable for fast port support. When fast port is enable, port state will go to forwarding as soon as the link is up. | 1.3.6.1.4.1.9.5.14.4.1.1.43 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| ciscoEsPortISLOperStatus OBJECT-TYPE The current operational mode for an ISL port. | 1.3.6.1.4.1.9.5.14.4.1.1.44 | INTEGER {trunking(1), non-trunking(2)} | read-only | mandatory |
| ciscoEsPortISLAdminStatus OBJECT-TYPE Used to configure the DISL modes for an ISL trunk port. | 1.3.6.1.4.1.9.5.14.4.1.1.45 | INTEGER {on(1), off(2), desirable(3), auto(4)} | read-write | mandatory |
| ciscoEsOptPortStaTable OBJECT-TYPE A table of station addresses known at an individual port. This table is designed to reduce the number of SNMP GETNEXT requests. This is done by packing many values into an octet string. (The maximum size frame should be used to return the result.) The instance returned for a GETNEXT is the value that identifies the last 'row' in the octet string. When the table is completely retrieved with one or more GETNEXTs, duplicate entries may be present, and entries may be skipped if the table is changing while being retrieved. | 1.3.6.1.4.1.9.5.14.4.2 | not-accessible | mandatory | |
| ciscoEsOptPortStaEntry OBJECT-TYPE Definition of the rows in the optimized port station address table. Rows can not be created or deleted via SNMP requests. | 1.3.6.1.4.1.9.5.14.4.2.1 | not-accessible | mandatory | |
| ciscoEsOptPortStaPos OBJECT-TYPE Third index for items in the optimized port station address table. | 1.3.6.1.4.1.9.5.14.4.2.1.1 | INTEGER (0..65535) | read-only | mandatory |
| ciscoEsOptPortStaVal OBJECT-TYPE An OCTET STRING containing a multiple number of stations from a port station address table. Each entry is encoded in the following format: Station MAC address - 6 octets Location 1 - local 2 - remote - 1 octet Port of exit Mask - 4 octets Source Frame Count - 4 octets (integer in little endian) Destn Frame Count - 4 octets (integer in little endian) Source Byte Count - 4 octets (integer in little endian) Destn Byte Count - 4 octets (integer in little endian) The Port of exit mask is encoded in its raw form as stored in the switch. Octet 1 Bit position 7 6 5 4 3 2 1 0 Port Number 31 30 29 28 27 26 25 24 Octet 2 Bit position 7 6 5 4 3 2 1 0 Port Number 23 22 21 20 19 18 17 16 Octet 3 Bit position 7 6 5 4 3 2 1 0 Port Number 15 14 13 12 11 10 9 8 Octet 4 Bit position 7 6 5 4 3 2 1 0 Port Number 7 6 5 4 3 2 1 CPU | 1.3.6.1.4.1.9.5.14.4.2.1.2 | OCTET STRING | read-only | mandatory |
| ciscoEsPortStnTable OBJECT-TYPE Port station table. | 1.3.6.1.4.1.9.5.14.4.3 | not-accessible | mandatory | |
| ciscoEsPortStnEntry OBJECT-TYPE Definition of the Conceptual row in the Port station table. | 1.3.6.1.4.1.9.5.14.4.3.1 | not-accessible | mandatory | |
| ciscoEsPortStnSwitchNumber OBJECT-TYPE Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back. | 1.3.6.1.4.1.9.5.14.4.3.1.1 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsPortStnPortNum OBJECT-TYPE Port number corresponding to this entry. | 1.3.6.1.4.1.9.5.14.4.3.1.2 | INTEGER | read-only | mandatory |
| ciscoEsPortStnAddress OBJECT-TYPE Station MAC address. | 1.3.6.1.4.1.9.5.14.4.3.1.3 | MacAddr | read-only | mandatory |
| ciscoEsPortStnLocation OBJECT-TYPE Where the station is located. | 1.3.6.1.4.1.9.5.14.4.3.1.4 | INTEGER {local(1), remote(2)} | read-only | mandatory |
| ciscoEsPortStnSrcFrames OBJECT-TYPE Number of frames with this station as the source. | 1.3.6.1.4.1.9.5.14.4.3.1.5 | Counter | read-only | mandatory |
| ciscoEsPortStnSrcBytes OBJECT-TYPE Number of Bytes with this station as the source. | 1.3.6.1.4.1.9.5.14.4.3.1.6 | Counter | read-only | mandatory |
| ciscoEsPortStnDestnFrames OBJECT-TYPE Number of frames with this station as the destination. | 1.3.6.1.4.1.9.5.14.4.3.1.7 | Counter | read-only | mandatory |
| ciscoEsPortStnDestnBytes OBJECT-TYPE Number of bytes with this station as the destination. | 1.3.6.1.4.1.9.5.14.4.3.1.8 | Counter | read-only | mandatory |
| ciscoEsPortStnPortOfExit OBJECT-TYPE A bit string that identifies the ports that frames destined to this address are forwarded to when received on this port. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.5.14.4.3.1.9 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| ciscoEsDmns OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14.5 | |||
| ciscoEsEChannel OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14.6 | |||
| ciscoEsECTable OBJECT-TYPE The EtherChannel table. | 1.3.6.1.4.1.9.5.14.6.1 | not-accessible | mandatory | |
| ciscoEsECEntry OBJECT-TYPE Definition of each row in the EtherChannel table. | 1.3.6.1.4.1.9.5.14.6.1.1 | not-accessible | mandatory | |
| ciscoEsECSwitchNumber OBJECT-TYPE Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back. | 1.3.6.1.4.1.9.5.14.6.1.1.1 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsECNumber OBJECT-TYPE The EtherChannel number for this row. | 1.3.6.1.4.1.9.5.14.6.1.1.2 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsECPorts OBJECT-TYPE The set of ports in this switch which are active in this EtherChannel. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.5.14.6.1.1.3 | OCTET STRING (SIZE(4)) | read-write | mandatory |
| ciscoEsFilter OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14.7 | |||
| ciscoEsFilterTable OBJECT-TYPE Filters set up in the switch. | 1.3.6.1.4.1.9.5.14.7.1 | not-accessible | mandatory | |
| ciscoEsFilterEntry OBJECT-TYPE Definition of each row in the filter table. | 1.3.6.1.4.1.9.5.14.7.1.1 | not-accessible | mandatory | |
| ciscoEsFilterSwitchNumber OBJECT-TYPE Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back. | 1.3.6.1.4.1.9.5.14.7.1.1.1 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsFilterStationAddress OBJECT-TYPE The destination MAC address in a frame to which this entry's filtering information applies. | 1.3.6.1.4.1.9.5.14.7.1.1.2 | MacAddr | read-only | mandatory |
| ciscoEsFilterType OBJECT-TYPE There are two types of filters (i) source filters which act on the source address portion of a packet and (ii) destination filters which act on the destination address portion of a packet. | 1.3.6.1.4.1.9.5.14.7.1.1.3 | INTEGER {source-filter(1), destination-filter(2)} | read-only | mandatory |
| ciscoEsFilterPorts OBJECT-TYPE The set of ports to which this filter is applied. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.5.14.7.1.1.4 | OCTET STRING (SIZE(4)) | read-write | mandatory |
| ciscoEsFilterMask OBJECT-TYPE The filter mask for this station. The semantics of the filter mask depend on the type of filter. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.5.14.7.1.1.5 | OCTET STRING (SIZE(4)) | read-write | mandatory |
| ciscoEsFilterRemoteSwitch OBJECT-TYPE In case of destination filters you can specify a particular port in a remote box as the destination port for a given station address. A value of 0 indicates no remote switch is configured. | 1.3.6.1.4.1.9.5.14.7.1.1.6 | INTEGER (0..8) | read-write | mandatory |
| ciscoEsFilterRemotePort OBJECT-TYPE In case of destination filters you can specify a particular port in a remote box as the destination port for a given station address. A value of 0 indicates no remote ports assigned. | 1.3.6.1.4.1.9.5.14.7.1.1.7 | INTEGER (0..29) | read-write | mandatory |
| ciscoEsFilterStatus OBJECT-TYPE GET request always returns valid (1). Set this object to invalid (2) to delete an entry. | 1.3.6.1.4.1.9.5.14.7.1.1.8 | INTEGER {valid(1), invalid(2)} | read-write | mandatory |
| ciscoEsVLANs OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14.8 | |||
| ciscoEsVLANPortTable OBJECT-TYPE VLAN configuration table. | 1.3.6.1.4.1.9.5.14.8.1 | not-accessible | mandatory | |
| ciscoEsVLANPortEntry OBJECT-TYPE Definition of each row in the vlan Table | 1.3.6.1.4.1.9.5.14.8.1.1 | not-accessible | mandatory | |
| ciscoEsVLANPortVLANNumber OBJECT-TYPE VLAN identifier for this row. | 1.3.6.1.4.1.9.5.14.8.1.1.1 | INTEGER (0..63) | read-only | mandatory |
| ciscoEsVLANPortSwitchNumber OBJECT-TYPE Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back. | 1.3.6.1.4.1.9.5.14.8.1.1.2 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsVLANPortPorts OBJECT-TYPE The set of ports in this switch which belong to this VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.5.14.8.1.1.3 | OCTET STRING (SIZE(4)) | read-write | mandatory |
| ciscoEsVLANInfoTable OBJECT-TYPE VLAN Information table. | 1.3.6.1.4.1.9.5.14.8.2 | not-accessible | mandatory | |
| ciscoEsVLANInfoEntry OBJECT-TYPE Definition of each row in the vlan Table | 1.3.6.1.4.1.9.5.14.8.2.1 | not-accessible | mandatory | |
| ciscoEsVLANInfoVLANNumber OBJECT-TYPE VLAN identifier for this row. | 1.3.6.1.4.1.9.5.14.8.2.1.1 | INTEGER (0..63) | read-only | mandatory |
| ciscoEsVLANInfoState OBJECT-TYPE Current state of the vlan. If a vlan has at least one port, it is considered active (1). | 1.3.6.1.4.1.9.5.14.8.2.1.2 | INTEGER {active(1), inactive(2)} | read-only | mandatory |
| ciscoEsVLANInfoName OBJECT-TYPE User defined name of the vlan. | 1.3.6.1.4.1.9.5.14.8.2.1.3 | DisplayString (SIZE(1..32)) | read-write | mandatory |
| ciscoEsVLANInfoBaseAddr OBJECT-TYPE The MAC address assigned to this vlan. This address is the MAC address of the lowest numbered port in the vlan. | 1.3.6.1.4.1.9.5.14.8.2.1.4 | MacAddr | read-only | mandatory |
| ciscoEsVLANInfoIfIndex OBJECT-TYPE The ifIndex of the interface entry corresponding to each vlan. | 1.3.6.1.4.1.9.5.14.8.2.1.5 | INTEGER | read-only | mandatory |
| ciscoEsVLANInfoIpState OBJECT-TYPE IP configuration for this vlan. | 1.3.6.1.4.1.9.5.14.8.2.1.6 | INTEGER {disabled(1), auto-bootp(2), always-bootp(3)} | read-write | mandatory |
| ciscoEsVLANInfoIpAddress OBJECT-TYPE IP Address assigned to this vlan. Changes to the IP Address of the vlan to which the management station belongs cause loss of connectivity until the management station updates its information about the IP Address. | 1.3.6.1.4.1.9.5.14.8.2.1.7 | IpAddress | read-write | mandatory |
| ciscoEsVLANInfoIpSubnetMask OBJECT-TYPE The subnet mask for this vlan. | 1.3.6.1.4.1.9.5.14.8.2.1.8 | IpAddress | read-write | mandatory |
| ciscoEsVLANInfoIpDefaultGateway OBJECT-TYPE The IP Address of the default gateway for this VLAN. | 1.3.6.1.4.1.9.5.14.8.2.1.9 | IpAddress | read-write | mandatory |
| ciscoEsVLANInfoStp OBJECT-TYPE Turn Spanning tree on or off. | 1.3.6.1.4.1.9.5.14.8.2.1.10 | INTEGER {on(1), off(2)} | read-write | mandatory |
| ciscoEsVLANInfoNumStations OBJECT-TYPE Number of local stations (nodes) in the vlan. | 1.3.6.1.4.1.9.5.14.8.2.1.11 | Gauge | read-only | mandatory |
| ciscoEsVLANInfoMaxStations OBJECT-TYPE Aggregate of the highest number of local stations (nodes) in the vlan calculated separately on each box. | 1.3.6.1.4.1.9.5.14.8.2.1.12 | INTEGER | read-only | mandatory |
| ciscoEsVLANStpTable OBJECT-TYPE Spanning tree information table for each vlan. | 1.3.6.1.4.1.9.5.14.8.3 | not-accessible | mandatory | |
| ciscoEsVLANStpEntry OBJECT-TYPE Definition of each row in the vlan specific spanning tree information table. | 1.3.6.1.4.1.9.5.14.8.3.1 | not-accessible | mandatory | |
| ciscoEsVLANStpVLANIndex OBJECT-TYPE Integer reference to the vlan number in the vlan table. | 1.3.6.1.4.1.9.5.14.8.3.1.1 | INTEGER (0..63) | read-only | mandatory |
| ciscoEsVLANStpPriority OBJECT-TYPE The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of ciscoEsVLANBaseBridgeAddress. The bridge ID corresponds to the particular instance of spanning tree running in this vlan | 1.3.6.1.4.1.9.5.14.8.3.1.2 | INTEGER (0..65535) | read-write | mandatory |
| ciscoEsVLANStpTimeSinceTopologyChange OBJECT-TYPE The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. | 1.3.6.1.4.1.9.5.14.8.3.1.3 | TimeTicks | read-only | mandatory |
| ciscoEsVLANStpTopChanges OBJECT-TYPE The total number of topology changes detected by this vlan since the management entity was last reset or initialized. | 1.3.6.1.4.1.9.5.14.8.3.1.4 | Counter | read-only | mandatory |
| ciscoEsVLANStpDesignatedRoot OBJECT-TYPE The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this vlan. | 1.3.6.1.4.1.9.5.14.8.3.1.5 | BridgeId | read-only | mandatory |
| ciscoEsVLANStpRootCost OBJECT-TYPE The cost of the path to the root as seen from this vlan. | 1.3.6.1.4.1.9.5.14.8.3.1.6 | INTEGER | read-only | mandatory |
| ciscoEsVLANStpRootPort OBJECT-TYPE The port number of the port which offers the lowest cost path from this vlan to the root bridge. | 1.3.6.1.4.1.9.5.14.8.3.1.7 | INTEGER | read-only | mandatory |
| ciscoEsVLANStpMaxAge OBJECT-TYPE The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this vlan is currently using. | 1.3.6.1.4.1.9.5.14.8.3.1.8 | INTEGER | read-only | mandatory |
| ciscoEsVLANStpHelloTime OBJECT-TYPE The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this vlan is currently using. | 1.3.6.1.4.1.9.5.14.8.3.1.9 | INTEGER | read-only | mandatory |
| ciscoEsVLANStpHoldTime OBJECT-TYPE This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this vlan, in units of hundredths of a second. | 1.3.6.1.4.1.9.5.14.8.3.1.10 | INTEGER | read-only | mandatory |
| ciscoEsVLANStpForwardDelay OBJECT-TYPE This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this vlan is currently using, in contrast to ciscoEsVLANStpBridgeForwardDelay which is the value that this vlan and all others would start using if/when this vlan were to become the root.] | 1.3.6.1.4.1.9.5.14.8.3.1.11 | INTEGER | read-only | mandatory |
| ciscoEsVLANStpBridgeMaxAge OBJECT-TYPE The value that all bridges use for MaxAge when this vlan is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of ciscoEsVLANStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. | 1.3.6.1.4.1.9.5.14.8.3.1.12 | INTEGER (600..4000) | read-write | mandatory |
| ciscoEsVLANStpBridgeHelloTime OBJECT-TYPE The value that all bridges use for HelloTime when this vlan is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. | 1.3.6.1.4.1.9.5.14.8.3.1.13 | INTEGER (100..1000) | read-write | mandatory |
| ciscoEsVLANStpBridgeForwardDelay OBJECT-TYPE The value that all bridges use for ForwardDelay when this vlan is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of ciscoEsVLANStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. | 1.3.6.1.4.1.9.5.14.8.3.1.14 | INTEGER (400..3000) | read-write | mandatory |
| ciscoEsVLANStationTable OBJECT-TYPE Stations seen in each vlan. | 1.3.6.1.4.1.9.5.14.8.4 | not-accessible | mandatory | |
| ciscoEsVLANStationEntry OBJECT-TYPE Definition of each row in the vlan specific station table. | 1.3.6.1.4.1.9.5.14.8.4.1 | not-accessible | mandatory | |
| ciscoEsVLANStationVLANIndex OBJECT-TYPE Integer reference to the vlan number in the vlan table. | 1.3.6.1.4.1.9.5.14.8.4.1.1 | INTEGER (0..63) | read-only | mandatory |
| ciscoEsVLANStationBoxNum OBJECT-TYPE Integer reference to the switch number on which the table entry resides. | 1.3.6.1.4.1.9.5.14.8.4.1.2 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsVLANStationAddress OBJECT-TYPE The Station's MAC address. | 1.3.6.1.4.1.9.5.14.8.4.1.3 | OCTET STRING (SIZE(6)) | read-only | mandatory |
| ciscoEsVLANStationPort OBJECT-TYPE The source port for the Station. | 1.3.6.1.4.1.9.5.14.8.4.1.4 | INTEGER | read-only | mandatory |
| ciscoEsVLANStationTraffic OBJECT-TYPE A bit string that identifies with value of one of the ports that this station has generated traffic to or from. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | 1.3.6.1.4.1.9.5.14.8.4.1.5 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| ciscoEsOptVLANStaTable OBJECT-TYPE A table of station addresses known at an individual port. This table is designed to reduce the number of SNMP GETNEXT requests. This is done by packing many values into an octet string. (The maximum size frame should be used to return the result.) The instance returned for a GETNEXT is the value that identifies the last 'row' in the octet string. When the table is completely retrieved with one or more GETNEXTs, duplicate entries may be present, and entries may be skipped if the table is changing while being retrieved. | 1.3.6.1.4.1.9.5.14.8.5 | not-accessible | mandatory | |
| ciscoEsOptVLANStaEntry OBJECT-TYPE Definition of the rows in the optimized port station address table. Rows can not be created or deleted via SNMP requests. | 1.3.6.1.4.1.9.5.14.8.5.1 | not-accessible | mandatory | |
| ciscoEsOptVLANStaPos OBJECT-TYPE Third index for items in the optimized port station address table. | 1.3.6.1.4.1.9.5.14.8.5.1.1 | INTEGER (0..65535) | read-only | mandatory |
| ciscoEsOptVLANStaVal OBJECT-TYPE An OCTET STRING containing a multiple number of stations from the vlan station address table. Each entry is encoded in the following format: Station MAC address - 6 octets Port of Entry - 1 octet Traffic Mask - 4 octets The traffic mask is encoded in its raw form as stored in the switch. Octet 1 Bit position 7 6 5 4 3 2 1 0 Port Number 31 30 29 28 27 26 25 24 Octet 2 Bit position 7 6 5 4 3 2 1 0 Port Number 23 22 21 20 19 18 17 16 Octet 3 Bit position 7 6 5 4 3 2 1 0 Port Number 15 14 13 12 11 10 9 8 Octet 4 Bit position 7 6 5 4 3 2 1 0 Port Number 7 6 5 4 3 2 1 CPU | 1.3.6.1.4.1.9.5.14.8.5.1.2 | OCTET STRING | read-only | mandatory |
| ciscoEsTransitedConfiguredVLANs OBJECT-TYPE A string of octets containing one bit per VLAN in the management domain. The first octet corresponds to VLANs with VlanIndex 1 through 8; the second octet to VLANs 9 through 16; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit correspond to a VLAN is set to '1', then the VLAN is a configured transited VLAN on the local device. (Default VLANs which must transit the local device are always considered to be 'configured transited VLANs'.) Any attempt to set a bit string which has: more bits set than the local device can transit; or does not have all bits set corresponding to default VLANs which must transit the device; or set any bits corresponding to non-existant VLANs (VLANs whose IDs are not defined in the management domain) will be completely rejected as an illegal value. | 1.3.6.1.4.1.9.5.14.8.6 | OCTET STRING (SIZE(128)) | read-write | mandatory |
| ciscoEsTransitedVLANs OBJECT-TYPE A string of octets containing one bit per VLAN in the management domain. The first octet corresponds to VLANs with VlanIndex 1 through 8; the second octet to VLANs 9 through 16; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the VLAN transits the local device either because it was configured to or because it was selected to automatically by the selection algorithm. | 1.3.6.1.4.1.9.5.14.8.7 | OCTET STRING (SIZE(128)) | read-only | mandatory |
| ciscoEsRouter OBJECT-IDENTITY | 1.3.6.1.4.1.9.5.14.9 | |||
| ciscoEsRouterTable OBJECT-TYPE Router Port information. | 1.3.6.1.4.1.9.5.14.9.1 | not-accessible | mandatory | |
| ciscoEsRouterEntry OBJECT-TYPE Definition of each row in the Router Table | 1.3.6.1.4.1.9.5.14.9.1.1 | not-accessible | mandatory | |
| ciscoEsRouterBox OBJECT-TYPE Index into the router table row. | 1.3.6.1.4.1.9.5.14.9.1.1.1 | INTEGER (1..8) | read-only | mandatory |
| ciscoEsRouterPort OBJECT-TYPE Index into the router table column. | 1.3.6.1.4.1.9.5.14.9.1.1.2 | INTEGER | read-only | mandatory |
| ciscoEsRouterOpState OBJECT-TYPE GET request returns up (1) down(2) for operation state. | 1.3.6.1.4.1.9.5.14.9.1.1.3 | INTEGER {up(1), down(2), empty(3), unknown(4)} | read-only | mandatory |
| ciscoEsRouterNetAddr OBJECT-TYPE The IP address of the router. | 1.3.6.1.4.1.9.5.14.9.1.1.4 | IpAddress | read-only | mandatory |
| ciscoEsRouterBoardId OBJECT-TYPE The Board Id of the router. | 1.3.6.1.4.1.9.5.14.9.1.1.5 | INTEGER | read-only | mandatory |
| ciscoEsRouterRev OBJECT-TYPE The Board Rev of the router. | 1.3.6.1.4.1.9.5.14.9.1.1.6 | INTEGER | read-only | mandatory |
Notifications
| Name | OID | Status |
|---|---|---|
| ciscoEsStackCfgChange NOTIFICATION-TYPE This trap is generated when there is a change in the stack configuration i.e. when either a new switch is added to the stack or a switch leaves a stack. ciscoEsNumSwitches indicates the current number of switches which are part of the stack. The management station has to update its stack information according to the stack table. | 1.3.6.1.4.1.9.5.14.1.1.0.1 | |
| ciscoEsStackProStackMatrixChange NOTIFICATION-TYPE This trap is generated when the stack switches over from primary to secondary Matrix or from secondary back to primary Matrix. | 1.3.6.1.4.1.9.5.14.1.1.0.2 | |
| ciscoEsStackTempChange NOTIFICATION-TYPE This trap is generated when the temperature in a switch exceeds normal or returns to normal. | 1.3.6.1.4.1.9.5.14.2.0.1 | |
| ciscoEsPortStrNFwdEntry NOTIFICATION-TYPE This trap is generated when a port automatically enters store and forward mode when the error rate exceeds the threshold. | 1.3.6.1.4.1.9.5.14.4.0.1 | |
| ciscoEsEtherChannelFailed NOTIFICATION-TYPE This trap is sent when one of the links in an EtherChannel fail. The variable ciscoEsECPorts contains the ports which are operational in the EtherChannel. | 1.3.6.1.4.1.9.5.14.6.0.1 | |
| ciscoEsVLANNewRoot NOTIFICATION-TYPE This trap is a vlan specific version of the newRoot trap as described in RFC1493. The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election. Implementation of this trap is optional. | 1.3.6.1.4.1.9.5.14.8.0.1 | |
| ciscoEsVLANTopologyChange NOTIFICATION-TYPE This trap is a vlan specific version of the topologyChange trap as described in RFC1493. A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional. | 1.3.6.1.4.1.9.5.14.8.0.2 |