MIBs Depot

CISCO-DMN-DSG-TUNING-MIB

Registered at
1.3.6.1.4.1.1429.2.2.5.5
Last updated
2012-11-19 08:00
Organization
Cisco Systems, Inc.
Revisions
2012-11-19 08:00, 2010-10-13 08:00, 2010-08-03 09:00, 2010-06-17 06:00, 2010-05-03 11:00, 2010-04-12 09:00, 2010-03-22 05:00, 2010-02-12 15:00, 2010-01-18 15:00, 2009-12-20 15:00, 2009-11-22 15:00
Namespace
cisco
Source file
CISCO-DMN-DSG-TUNING-MIB
Digest
sha256:5ad3a5fc5b83e228d5051f9b23900b9743b9817187c944dbe24e9b9e0cdec2e4

Description

Cisco DSG Tuning MIB.

Contact

Cisco Systems, Inc. Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 NETS E-mail: cs-ipsla@cisco.com

Imports

FromSymbols
CISCO-DMN-DSG-ROOT-MIBciscoDSGUtilities
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-DMN-DSG-ROOT-MIB
CISCO-DMN-DSG-TUNING-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
activeTuning
OBJECT-IDENTITY
1.3.6.1.4.1.1429.2.2.5.5.1
activeTuningInput
OBJECT-TYPE
Select Input for tuning.
1.3.6.1.4.1.1429.2.2.5.5.1.1INTEGER {asi(1), rf1(2), rf2(3), rf3(4), rf4(5), ipi(6), none(255)}read-writecurrent
activeTuningValidateOrbPos
OBJECT-TYPE
Command used to validate orbital position. Set this object to yes( 2 ) to validate Orbital position.
1.3.6.1.4.1.1429.2.2.5.5.1.2INTEGER {writeOnly(1), yes(2)}read-writecurrent
activeTuningChScan
OBJECT-TYPE
Channel Scan command. Setting scan( 1 ) triggers the channel scanning process.
1.3.6.1.4.1.1429.2.2.5.5.1.3INTEGER {scan(1), writeOnly(2)}read-writecurrent
activeTuningTable
OBJECT-IDENTITY
1.3.6.1.4.1.1429.2.2.5.5.2
activeTunerTable
OBJECT-TYPE
Active Tuner Table.
1.3.6.1.4.1.1429.2.2.5.5.2.1not-accessiblecurrent
activeTunerEntry
OBJECT-TYPE
Entry for Active Tuner Table.
1.3.6.1.4.1.1429.2.2.5.5.2.1.1not-accessiblecurrent
activeTunerIndex
OBJECT-TYPE
Active Tuner Index.
1.3.6.1.4.1.1429.2.2.5.5.2.1.1.1Integer32 (1)not-accessiblecurrent
activeTunerRFInput
OBJECT-TYPE
Active Tuner RF Input.
1.3.6.1.4.1.1429.2.2.5.5.2.1.1.2INTEGER {rf1(2), rf2(3), rf3(4), rf4(5), none(255)}read-writecurrent
activeTunerFreq
OBJECT-TYPE
The Satellite Downlink frequency in the range of 0 to 15000000 KHz in steps of 1 KHz.
1.3.6.1.4.1.1429.2.2.5.5.2.1.1.3Integer32 (0..15000000)read-writecurrent
activeTunerSymbolRate
OBJECT-TYPE
Data rate on the transport stream in millions of symbols per second. Range is from 10000 to 450000 hectoSym/second in steps of 1 hectoSym/second. ( 1 hecto = 10^2 ).
1.3.6.1.4.1.1429.2.2.5.5.2.1.1.4Integer32 (10000..450000)read-writecurrent
activeTunerDVBSFEC
OBJECT-TYPE
Forward Error Correction Rate. For DVB-S2 modulation only auto is applicable. For DVB-S modulation all options are applicable.
1.3.6.1.4.1.1429.2.2.5.5.2.1.1.5INTEGER {oneHalf(1), twoThirds(3), threeQuarters(4), fiveSixths(6), sevenEigths(7), auto(10)}read-writecurrent
activeTunerModulation
OBJECT-TYPE
Signal Modulation type.
1.3.6.1.4.1.1429.2.2.5.5.2.1.1.6INTEGER {dvbs(1), dvbs2(2)}read-writecurrent
activeTunerRollOff
OBJECT-TYPE
Alpha filtering - for DVB-S: 0.20/0.35, for DVB-S2: 0.20/0.25/0.35. Roll off with scaling factor of 1/100.
1.3.6.1.4.1.1429.2.2.5.5.2.1.1.7INTEGER {f35(1), f25(2), f20(3)}read-writecurrent
activeTunerIQ
OBJECT-TYPE
Spectrum Inversion.
1.3.6.1.4.1.1429.2.2.5.5.2.1.1.8INTEGER {inverted(1), nonInverted(2), auto(3)}read-writecurrent
activeInputTable
OBJECT-TYPE
Active Input Table.
1.3.6.1.4.1.1429.2.2.5.5.2.2not-accessiblecurrent
activeInputEntry
OBJECT-TYPE
Entry for Active Input Table.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1not-accessiblecurrent
activeInputRFIndex
OBJECT-TYPE
Selection of RF Input.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.1INTEGER {rf1(1), rf2(2), rf3(3), rf4(4)}not-accessiblecurrent
activeInputLNBType
OBJECT-TYPE
LNB Type: C-Band/Single Ku/Dual Ku/Advanced. For simplified setup select C-Band or Ku-Band. If there is a need to configure LO, select Advanced.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.2INTEGER {cBand(1), singleKuBand(2), dualKuBand(3), advanced(4)}read-writecurrent
activeInputLNBTrim
OBJECT-TYPE
Low Noise Block Trim Level 1 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.3Integer32 (0..15000000)read-writecurrent
activeInputLNBTrim2
OBJECT-TYPE
Low Noise Block Trim Level 2 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.4Integer32 (0..15000000)read-writecurrent
activeInputLocalOscFreq1
OBJECT-TYPE
RW, only when LNB Type is Advanced. Local Oscillator #1 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.5Integer32 (0..15000000)read-writecurrent
activeInputLocalOscFreq2
OBJECT-TYPE
RW, only when LNB Type is Advanced. Local Oscillator #2 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.6Integer32 (0..15000000)read-writecurrent
activeInputCrossOver
OBJECT-TYPE
Crossover Frequency for Local Oscillator. It has a range of 0 to 15000000 KHz in steps of 1KHz.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.7Integer32 (0..15000000)read-writecurrent
activeInputLocalOscControl
OBJECT-TYPE
22KHz Local Osillator Control.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.8INTEGER {off(1), on(2), auto(3)}read-writecurrent
activeInputOrbitalPos
OBJECT-TYPE
Orbital location Azimuth.The range is from 0 to 3600 in steps of 1. The scaling factor is 1/10th of a degree.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.9Integer32 (0..3600)read-writecurrent
activeInputEastWestFlag
OBJECT-TYPE
RF Mapping Location East/West Flag.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.10INTEGER {east(1), west(2), notApplicable(3)}read-writecurrent
activeInputPolarization
OBJECT-TYPE
RF Mapping Polarization.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.11INTEGER {horizontal(1), vertical(2), automatic(3)}read-writecurrent
activeInputSatName
OBJECT-TYPE
Satellite Name Matching the Orbital Position + E/W Flag. Enter Satellite/Transponder Name to fill in Azimuth and E/W Flag automatically.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.12DisplayString (SIZE(0..32))read-onlycurrent
activeInputLastLNBConfig
OBJECT-TYPE
LNB configuration last applied.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.13Integer32 (1..10)read-writecurrent
activeInputDiSeqCEnable
OBJECT-TYPE
DiSeqC On/Off.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.14INTEGER {disable(1), enable(2)}read-writecurrent
activeInputDiSeqCSwitch
OBJECT-TYPE
DiSeqC switch selection.
1.3.6.1.4.1.1429.2.2.5.5.2.2.1.15INTEGER {off(1), a(2), b(3), c(4), d(5), e(6), f(7), g(8), h(9), i(10), j(11), k(12), l(13), m(14), n(15), o(16), p(17)}read-writecurrent
lnbPowerTable
OBJECT-TYPE
LNB power Table.
1.3.6.1.4.1.1429.2.2.5.5.2.3not-accessiblecurrent
lnbPowerEntry
OBJECT-TYPE
Entry for LNB power Table.
1.3.6.1.4.1.1429.2.2.5.5.2.3.1not-accessiblecurrent
lnbPowerIndex
OBJECT-TYPE
Low Noise Block Power Index.
1.3.6.1.4.1.1429.2.2.5.5.2.3.1.1Integer32 (1)not-accessiblecurrent
lnbPowerInput
OBJECT-TYPE
Low Noise Block Power Input.
1.3.6.1.4.1.1429.2.2.5.5.2.3.1.2INTEGER {rf1(2), rf2(3), rf3(4), rf4(5), none(255)}read-writecurrent
lnbPowerControl
OBJECT-TYPE
Active LNB Power setting.13/18V is to control dual polarity LNB. The convention is: Horizontal-18V; Vertical-13V. Valid settings are, Off 13V ( 13V always, ignore polarity in NIT ) 18V ( 18V always, ignore polarity in NIT ) 13V-NIT ( 13V initially, over-ride by polarity in NIT ) 18V-NIT ( 18V initially, over-ride by polarity in NIT ).
1.3.6.1.4.1.1429.2.2.5.5.2.3.1.3INTEGER {off(1), thirteenV(2), eighteenH(3), hNIT(4), vNIT(5)}read-writecurrent
lnbPowerStatus
OBJECT-TYPE
Low Noise Block Power Supply Status.
1.3.6.1.4.1.1429.2.2.5.5.2.3.1.4INTEGER {notApplicable(1), normal(2), noLoad(3), overTemperature(4), overLoad(5), shortCircuit(6), disabled(7)}read-onlycurrent
tuningStatusTable
OBJECT-IDENTITY
1.3.6.1.4.1.1429.2.2.5.5.3
satSignalTable
OBJECT-TYPE
Satellite Signal Table.
1.3.6.1.4.1.1429.2.2.5.5.3.1not-accessiblecurrent
satSignalEntry
OBJECT-TYPE
Entry for Satellite Signal Table.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1not-accessiblecurrent
satSignalIndex
OBJECT-TYPE
Satellite Signal Table Index.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.1Integer32 (1)not-accessiblecurrent
satSignalPvBer
OBJECT-TYPE
Status: DVB-S Post-Viterbi Bit Error Rate.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.2DisplayString (SIZE(0..32))read-onlycurrent
satSignalQPSKBer
OBJECT-TYPE
Status: Quadrature phase-shift keying ( QPSK ) Bit error rate.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.3DisplayString (SIZE(0..32))read-onlycurrent
satSignalLdpCber
OBJECT-TYPE
Status: DVB-S2 Low Density Parity Check Bit Error Rate.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.4DisplayString (SIZE(0..32))read-onlycurrent
satSignalCndisp
OBJECT-TYPE
Status: Carrier to Noise Ratio.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.5DisplayString (SIZE(0..32))read-onlycurrent
satSignalCnMargin
OBJECT-TYPE
Status: Carrier to Noise Ratio Link Margin.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.6DisplayString (SIZE(0..32))read-onlycurrent
satSignalLevel
OBJECT-TYPE
Status: Signal Level.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.7DisplayString (SIZE(0..32))read-onlycurrent
satSignalSatDishCnMargin
OBJECT-TYPE
Status: SatDish CN Margin in dB Displays the margin in dB to a threshold level at which failure occurs. The range is 0dB to 10dB.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.8DisplayString (SIZE(0..40))read-onlycurrent
satSignalSatDishSigLevel
OBJECT-TYPE
Status: SatDish Signal level( in dBm ) plus some kind of graphical signal level meter on the LCD (the range is -75 dBm to +-20 dBm).
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.9DisplayString (SIZE(0..40))read-onlycurrent
satSignalPerDisp
OBJECT-TYPE
Status: DVB-S2 Packet Error Rate.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.10DisplayString (SIZE(0..32))read-onlycurrent
satSignalAfc
OBJECT-TYPE
Status: Tuner Frequency Offset. The range is from -51.0 to 51.0 in steps of 0.1 MHz.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.11DisplayString (SIZE(0..32))read-onlycurrent
satSignalUncorErrCnt
OBJECT-TYPE
Status: Uncorrected Error Counter. The range is from 0 to 4294967295.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.12DisplayString (SIZE(0..32))read-onlycurrent
satSignalCorErrCnt
OBJECT-TYPE
Status: DVB-S Reed-Solomon Corrected Error Counter.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.13DisplayString (SIZE(0..32))read-onlycurrent
satSignalRfLock
OBJECT-TYPE
Status: RF Lock Status.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.14INTEGER {noLock(1), lock(2)}read-onlycurrent
satSignalDnLkFreq
OBJECT-TYPE
Status: Downlink Frequency in the range of 0.000000 to 15.000000 GHz in steps of 0.000001 GHz.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.15DisplayString (SIZE(0..32))read-onlycurrent
satSignalLbandFreq
OBJECT-TYPE
Status: L-Band Frequency in the range of 950.000 to 2150.000 MHz in steps of 0.001 MHz.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.16DisplayString (SIZE(0..32))read-onlycurrent
satSignalSymbolRate
OBJECT-TYPE
Status: Symbol Rate in the Range of 1.0000 to 45.0000 MegaSym/second in steps of 0.0001 MegaSym/second.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.17DisplayString (SIZE(0..32))read-onlycurrent
satSignalFecRate
OBJECT-TYPE
Status: Forward Error Correction Rate.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.18INTEGER {notApplicable(1), half(2), threeFifth(3), twoThird(4), threeQuater(5), fourFifth(6), fiveSixth(7), sevenEight(8), eightNinth(9), nineTenth(10), auto(11)}read-onlycurrent
satSignalPolarization
OBJECT-TYPE
Status: Signal Polarization.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.19INTEGER {horizontal(1), vertical(2), leftCircular(3), rightCircular(4), auto(5)}read-onlycurrent
satSignalModulation
OBJECT-TYPE
Status: Signal Modulation Type.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.20INTEGER {notApplicable(1), qpskDvbs(2), qpskDvbs2(3), eightPskDvbs2(4), sixteenQamDvbs2(5)}read-onlycurrent
satSignalIQ
OBJECT-TYPE
Status: Spectrum Inversion.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.21INTEGER {inverted(1), nonlnverted(2), auto(3), notApplicable(4)}read-onlycurrent
satSignalLnbPsStatus
OBJECT-TYPE
Status: Low Noise Block Power Supply Status.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.22INTEGER {notApplicable(1), normal(2), noLoad(3), overTemperature(4), overLoad(5), shortCircuit(6), disabled(7)}read-onlycurrent
satSignalPilots
OBJECT-TYPE
Status: Presence of Pilot Symbols.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.23INTEGER {no(1), yes(2), notApplicable(3)}read-onlycurrent
satSignalLoSelect
OBJECT-TYPE
Status: LO Select.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.24INTEGER {off(1), on(2), auto(3)}read-onlycurrent
satSignalPolar
OBJECT-TYPE
Status: Polarization.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.25INTEGER {horizontal(1), vertical(2), leftCircular(3), rightCircular(4), auto(5)}read-onlycurrent
satSignalClearSigErrCnt
OBJECT-TYPE
Set this variable to yes( 2 ) to clear signal error counter.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.26INTEGER {writeOnly(1), yes(2)}read-writecurrent
satSignalValidateOrbPosDate
OBJECT-TYPE
Status: Last Orbital Position Validate Date.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.27DisplayString (SIZE(0..63))read-onlycurrent
satSignalValidateOrbPosStat
OBJECT-TYPE
Status: Orbital Position Validation Status.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.28DisplayString (SIZE(0..63))read-onlycurrent
satSignalChScanStatus
OBJECT-TYPE
Channel Scanning Status :Off/Scanning/Done.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.29INTEGER {off(1), scanning(2), done(3)}read-onlycurrent
satSignalSigLevelRaw
OBJECT-TYPE
Signal Level - RAW Register Value.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.30DisplayString (SIZE(0..5))read-onlycurrent
satSignalP1DStatus
OBJECT-TYPE
P1 DSTATUS.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.31DisplayString (SIZE(0..3))read-onlycurrent
satSignalDvbS2FrameLen
OBJECT-TYPE
DVB-S2 Frame Length.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.32INTEGER {shortFrame(1), longFrame(2), notApplicable(3)}read-onlycurrent
satSignalCnMarginRaw
OBJECT-TYPE
C/N Margin - RAW Register Value.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.33DisplayString (SIZE(0..17))read-onlycurrent
satSignalDvbSQpskErrCount
OBJECT-TYPE
DVB-S QPSK Error Count.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.34DisplayString (SIZE(0..8))read-onlycurrent
satSignalDvbS2LdpcErrCount
OBJECT-TYPE
DVB-S2 LPDC Error Count.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.35DisplayString (SIZE(0..8))read-onlycurrent
satSignalPvErrCount
OBJECT-TYPE
DVB-S PV Error Count.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.36DisplayString (SIZE(0..8))read-onlycurrent
satSignalFecSyncStatus
OBJECT-TYPE
FEC SYNC Status for DVB-S PV Decoder.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.37INTEGER {no(1), yes(2)}read-onlycurrent
satSignalPktErrCount
OBJECT-TYPE
DVB-S/DVB-S2 Packet Error Count.
1.3.6.1.4.1.1429.2.2.5.5.3.1.1.38DisplayString (SIZE(0..10))read-onlycurrent
inputStatusTable
OBJECT-TYPE
Input Status Table.
1.3.6.1.4.1.1429.2.2.5.5.3.2not-accessiblecurrent
inputStatusEntry
OBJECT-TYPE
Entry for Input Status Table.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1not-accessiblecurrent
inputStatusIndex
OBJECT-TYPE
Status: Index for inputStatus Table.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.1Integer32 (1)not-accessiblecurrent
inputStatusCurInput
OBJECT-TYPE
Status: Current Input for D9865 only.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.2INTEGER {rf(1)}read-onlycurrent
inputStatusSatLock
OBJECT-TYPE
Status: Satellite Lock: No Lock/Lock+Sig/Lock-Sig.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.3INTEGER {nolock(1), lockminussignal(2), lockplussignal(3)}read-onlycurrent
inputStatusMpgIpLock
OBJECT-TYPE
Signal Validity.MPEG over IP Lock.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.4INTEGER {nolock(1), lock(2)}read-onlycurrent
inputStatusInputRate
OBJECT-TYPE
Status: Input Rate in Mega bauds per second ( Mbps ). The range is from 0.000000 to 4294.967295 Mbps in steps of 0.000001 Mbps.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.5DisplayString (SIZE(0..32))read-onlycurrent
inputStatusNetworkName
OBJECT-TYPE
Status: Network Name.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.6DisplayString (SIZE(0..64))read-onlycurrent
inputStatusNetworkId
OBJECT-TYPE
Status: Network ID.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.7DisplayString (SIZE(0..32))read-onlycurrent
inputStatusTransportId
OBJECT-TYPE
Status: Transport ID.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.8DisplayString (SIZE(0..32))read-onlycurrent
inputStatusScramblingMode
OBJECT-TYPE
Status: Scrambling mode.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.9INTEGER {unknown(1), des(2), dvb(3), biss1(4), biss2(5), biss3(6)}read-onlycurrent
inputStatusTransportError
OBJECT-TYPE
Status: Transport Error.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.10INTEGER {notApplicable(1), ok(2), error(3)}read-onlycurrent
inputStatusAsiLock
OBJECT-TYPE
Status: ASI Lock.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.11INTEGER {nolock(1), lock(2)}read-onlycurrent
inputStatusAsiLinkError
OBJECT-TYPE
Status: ASI Link Error.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.12INTEGER {notApplicable(1), ok(2), error(3)}read-onlycurrent
inputStatusAsiPacketSize
OBJECT-TYPE
Status: ASI Packet Size.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.13INTEGER {notApplicable(1), oneHundredAndEightyEight(2), twoHundredAndFour(3)}read-onlycurrent
inputStatusLastTuneReason
OBJECT-TYPE
Status: Reason for the last tune.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.14DisplayString (SIZE(0..16))read-onlycurrent
inputStatusCurD985xInput
OBJECT-TYPE
Status: Current Input for all IRD models.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.15DisplayString (SIZE(0..16))read-onlycurrent
inputStatusIpiLinkStatus
OBJECT-TYPE
Status: IPI Ethernet Link Status.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.16DisplayString (SIZE(0..16))read-onlycurrent
inputStatusIpiSignal
OBJECT-TYPE
Status: IPI Signal Encapsulation Lock Status.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.17DisplayString (SIZE(0..16))read-onlycurrent
inputStatusIpiFecLock
OBJECT-TYPE
Status: FEC Lock Status.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.18DisplayString (SIZE(0..16))read-onlycurrent
inputStatusIpiPcrLock
OBJECT-TYPE
Status: Indicates if PCR is received without errors or not.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.19DisplayString (SIZE(0..16))read-onlycurrent
inputStatusIpiDelLatency
OBJECT-TYPE
Status: Dejitter Buffer Latency.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.20DisplayString (SIZE(0..16))read-onlycurrent
inputStatusIpiData1SrcIP
OBJECT-TYPE
Status: DATA1 Source IP Selected.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.21IpAddressread-onlycurrent
inputStatusIpiData2SrcIP
OBJECT-TYPE
Status: DATA2 Source IP Selected.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.22IpAddressread-onlycurrent
inputStatusIpiData1TsType
OBJECT-TYPE
Status: DATA1 Source Transport Type.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.23DisplayString (SIZE(0..16))read-onlycurrent
inputStatusIpiData2TsType
OBJECT-TYPE
Status: DATA2 Source Transport Type.
1.3.6.1.4.1.1429.2.2.5.5.3.2.1.24DisplayString (SIZE(0..16))read-onlycurrent
siRcvTable
OBJECT-IDENTITY
1.3.6.1.4.1.1429.2.2.5.5.4
siRcvOptionTable
OBJECT-TYPE
Rcv Option Table.
1.3.6.1.4.1.1429.2.2.5.5.4.1not-accessiblecurrent
siRcvOptionEntry
OBJECT-TYPE
Entry for Rcv Option Table.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1not-accessiblecurrent
siRcvOptionInstance
OBJECT-TYPE
Instance for siRcvOptionTable.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.1Integer32 (1)not-accessiblecurrent
siRcvOptionAcqMode
OBJECT-TYPE
Custom Tuning Mode: Acquisition Mode.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.2INTEGER {basic(1), auto(2), custom(3)}read-writecurrent
siRcvOptionReacq
OBJECT-TYPE
Set this variable to yes( 2 ) to reacquire signal.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.3INTEGER {writeOnly(1), yes(2)}read-writecurrent
siRcvOptionNetID
OBJECT-TYPE
Network ID.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.4Integer32 (0..65535)read-writecurrent
siRcvOptionInputSel
OBJECT-TYPE
UserCfg locks to RF input set by the user and SW Map uses Orbital Position settings to select RF input. It is recommended to set Validate Orbital Position to 'Yes' for SW Mapped option.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.5INTEGER {userCfg(1), swMap(2)}read-writecurrent
siRcvOptionFreqSel
OBJECT-TYPE
Custom Tuning Mode: Frequency Tuning Mode: NIT/Preset.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.6INTEGER {nit(1), userCfg(2)}read-writecurrent
siRcvOptionServListMode
OBJECT-TYPE
Custom Tuning Mode: Service List Mode: Rigorous/Degraded.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.7INTEGER {rigorous(1), degraded(2)}read-writecurrent
siRcvOptionUseBAT
OBJECT-TYPE
Custom Tuning Mode:Bouquet Association Table in Service List.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.8INTEGER {no(1), yes(2)}read-onlycurrent
siRcvOptionUseNIT
OBJECT-TYPE
Custom Tuning Mode:Network Information Table in Service List.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.9INTEGER {no(1), yes(2)}read-writecurrent
siRcvOptionUseSDT
OBJECT-TYPE
Custom Tuning Mode:Service Description Table in Service List.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.10INTEGER {no(1), yes(2)}read-writecurrent
siRcvOptionUsePAT
OBJECT-TYPE
Custom Tuning Mode:Program Association Table in Service List.
1.3.6.1.4.1.1429.2.2.5.5.4.1.1.11INTEGER {no(1), yes(2)}read-writecurrent
siRcvOptionStatusTable
OBJECT-TYPE
Rcv Option Status Table.
1.3.6.1.4.1.1429.2.2.5.5.4.2not-accessiblecurrent
siRcvOptionStatusEntry
OBJECT-TYPE
Entry for Rcv Option Status Table.
1.3.6.1.4.1.1429.2.2.5.5.4.2.1not-accessiblecurrent
siRcvOptionStatusInstance
OBJECT-TYPE
Instance of siRcv Option Status Table.
1.3.6.1.4.1.1429.2.2.5.5.4.2.1.1Integer32 (1)not-accessiblecurrent
siRcvOptionLastChanReas
OBJECT-TYPE
Source of the last tuning.
1.3.6.1.4.1.1429.2.2.5.5.4.2.1.2INTEGER {nit(1), uplinkForceRetune(2), userEntry(3), preset(4)}read-onlycurrent
siRcvOptionLastActivated
OBJECT-TYPE
Last Preset Activated number.The range is from 0 to 64.
1.3.6.1.4.1.1429.2.2.5.5.4.2.1.3DisplayString (SIZE(0..32))read-onlycurrent
siRcvOptionStatusFreqSel
OBJECT-TYPE
Status of Frequency tuning mode.
1.3.6.1.4.1.1429.2.2.5.5.4.2.1.4INTEGER {nit(1), userCfg(2)}read-onlycurrent
siRcvOptionStatusServListMode
OBJECT-TYPE
Status of Service list mode.
1.3.6.1.4.1.1429.2.2.5.5.4.2.1.5INTEGER {rigorous(1), degraded(2)}read-onlycurrent
siRcvOptionStatusUseBAT
OBJECT-TYPE
Status of Bouquet Association Table in Service List.
1.3.6.1.4.1.1429.2.2.5.5.4.2.1.6INTEGER {no(1), yes(2)}read-onlycurrent
siRcvOptionStatusUseNIT
OBJECT-TYPE
Status of Network Information Table in Service List.
1.3.6.1.4.1.1429.2.2.5.5.4.2.1.7INTEGER {no(1), yes(2)}read-onlycurrent
siRcvOptionStatusUseSDT
OBJECT-TYPE
Status of Service Description Table in Service List.
1.3.6.1.4.1.1429.2.2.5.5.4.2.1.8INTEGER {no(1), yes(2)}read-onlycurrent
siRcvOptionStatusUsePAT
OBJECT-TYPE
Status of Program Association Table in Service List.
1.3.6.1.4.1.1429.2.2.5.5.4.2.1.9INTEGER {no(1), yes(2)}read-onlycurrent
siInfoRxTable
OBJECT-TYPE
Service information Receive table.
1.3.6.1.4.1.1429.2.2.5.5.4.3not-accessiblecurrent
siInfoRxEntry
OBJECT-TYPE
Entry for Service Information Received.
1.3.6.1.4.1.1429.2.2.5.5.4.3.1not-accessiblecurrent
siInfoRxInstance
OBJECT-TYPE
Instance of SI Info Receive table.
1.3.6.1.4.1.1429.2.2.5.5.4.3.1.1Integer32 (1)not-accessiblecurrent
siInfoRxIdx
OBJECT-TYPE
Service Information Receive Table Index.
1.3.6.1.4.1.1429.2.2.5.5.4.3.1.2Integer32 (1..65535)not-accessiblecurrent
siInfoRxType
OBJECT-TYPE
Service Information Receive Table Type.
1.3.6.1.4.1.1429.2.2.5.5.4.3.1.3INTEGER {pat(1), cat(2), pmt(3), tsdt(4), nit(5), nitother(6), sdt(7), sdtother(8), bat(9), aeitpf(10), oeitpf(11), aeitES0(12), aeitES1(13), oeitES(14), tdt(15), rst(16), st(17), tot(18), dit(19), sit(20), ecmodd(21), ecmeven(22), emm(23), mpe(24), dpi(25), drt(26), cdt(27), mct(28), mat(29), mit(30), ect(31), invalidtableid(32)}read-onlycurrent
siInfoRxIDExt
OBJECT-TYPE
Service Information Receive Table ID Extension. The range is from 0 to 4294967295.
1.3.6.1.4.1.1429.2.2.5.5.4.3.1.4DisplayString (SIZE(0..32))read-onlycurrent
siInfoRxUid
OBJECT-TYPE
Service Information Receive Unique ID. The range is from 1 to 32.
1.3.6.1.4.1.1429.2.2.5.5.4.3.1.5DisplayString (SIZE(0..32))read-onlycurrent
siInfoRxStatus
OBJECT-TYPE
Service Information Receive Status.
1.3.6.1.4.1.1429.2.2.5.5.4.3.1.6INTEGER {none(1), partial(2), full(3), update(4), timeout(5), lost(6)}read-onlycurrent
siInfoRxVer
OBJECT-TYPE
Service Information Version. The range is from 0 to 4294967295.
1.3.6.1.4.1.1429.2.2.5.5.4.3.1.7DisplayString (SIZE(0..32))read-onlycurrent
siInfoRxPID
OBJECT-TYPE
Service Information Program ID. The range is from 0 to 8192.
1.3.6.1.4.1.1429.2.2.5.5.4.3.1.8DisplayString (SIZE(0..32))read-onlycurrent
siInfoRxSections
OBJECT-TYPE
Service Information Number of Sections. The range is from 0 to 4294967295.
1.3.6.1.4.1.1429.2.2.5.5.4.3.1.9DisplayString (SIZE(0..32))read-onlycurrent
siInfoTsTable
OBJECT-TYPE
Transport Stream table.
1.3.6.1.4.1.1429.2.2.5.5.4.4not-accessiblecurrent
siInfoTsEntry
OBJECT-TYPE
Entry for Transport stream table.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1not-accessiblecurrent
siInfoTsInstance
OBJECT-TYPE
Transport Stream Table Instance.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.1Integer32 (1)not-accessiblecurrent
siInfoTsIdx
OBJECT-TYPE
Service Information Transport Stream Index.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.2Integer32 (1..256)not-accessiblecurrent
siInfoTsId
OBJECT-TYPE
Frequency Plan: Service Information Transport Stream ID. The range is from 0 to 4294967295.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.3DisplayString (SIZE(0..32))read-onlycurrent
siInfoTsFreq
OBJECT-TYPE
Frequency Plan: Service Information Frequency The range is from 0.000000 to 15.000000 GHz in steps of 0.000001 GHz.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.4DisplayString (SIZE(0..32))read-onlycurrent
siInfoTsSymRate
OBJECT-TYPE
Frequency Plan: Service Information Symbol Rate. The range is from 1.0000 to 45.0000 Megasym/second in steps of 0.0001 Megasym.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.5DisplayString (SIZE(0..32))read-onlycurrent
siInfoTsOrbPosn
OBJECT-TYPE
Frequency Plan: Service Information Orbital Position. The range is from 0.0 to 360.0 .
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.6DisplayString (SIZE(0..32))read-onlycurrent
siInfoTsPolar
OBJECT-TYPE
Frequency Plan: Service Information Polarization.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.7INTEGER {horizontal(1), vertical(2), leftCircular(3), rightCircular(4), auto(5)}read-onlycurrent
siInfoTsFEC
OBJECT-TYPE
Frequency Plan: Service Information Forward Error Correction Rate.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.8INTEGER {notApplicable(1), half(2), threeFifth(3), twoThird(4), threeQuarter(5), fourFifth(6), fiveSixth(7), sevenEighth(8), eightNinth(9), nineTenth(10), auto(11)}read-onlycurrent
siInfoTsModulation
OBJECT-TYPE
Frequency Plan: Service Information Modulation.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.9INTEGER {notapplicable(1), qpskDvbS(2), qpskDvbS2(3), eightPskDvbS2(4), sixteenQamDvbsS2(5)}read-onlycurrent
siInfoTsOrgNetID
OBJECT-TYPE
Frequency Plan: Service Information Original Network ID. The range is from 0 to 4294967295.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.10DisplayString (SIZE(0..32))read-onlycurrent
siInfoTsEastWestFlag
OBJECT-TYPE
Frequency Plan: Service Information East West flag.
1.3.6.1.4.1.1429.2.2.5.5.4.4.1.11INTEGER {east(1), west(2), notApplicable(3)}read-onlycurrent
siInfoVCInfoTable
OBJECT-TYPE
VC table.
1.3.6.1.4.1.1429.2.2.5.5.4.5not-accessiblecurrent
siInfoVCInfoEntry
OBJECT-TYPE
Entry for VC information.
1.3.6.1.4.1.1429.2.2.5.5.4.5.1not-accessiblecurrent
siInfoVCInfoInstance
OBJECT-TYPE
Virtual Channel Info table Instance.
1.3.6.1.4.1.1429.2.2.5.5.4.5.1.1Integer32 (1)not-accessiblecurrent
siInfoVCInfoIdx
OBJECT-TYPE
Virtual Channel Info table Index.
1.3.6.1.4.1.1429.2.2.5.5.4.5.1.2Integer32 (1..262144)not-accessiblecurrent
siInfoVCInfoId
OBJECT-TYPE
Service Information VC Service ID. The range is from 0 to 4294967295.
1.3.6.1.4.1.1429.2.2.5.5.4.5.1.3DisplayString (SIZE(0..32))read-onlycurrent
siInfoVCInfoTxID
OBJECT-TYPE
Service Information VC Transport Stream ID. The range is from 0 to 4294967295.
1.3.6.1.4.1.1429.2.2.5.5.4.5.1.4DisplayString (SIZE(0..32))read-onlycurrent
siInfoVCInfoProgName
OBJECT-TYPE
Service Information VC Programme Name.
1.3.6.1.4.1.1429.2.2.5.5.4.5.1.5DisplayString (SIZE(0..63))read-onlycurrent
siInfoVCInfoPMTPID
OBJECT-TYPE
Service Information VC Program Map Table Program ID.
1.3.6.1.4.1.1429.2.2.5.5.4.5.1.6DisplayString (SIZE(0..32))read-onlycurrent
siInfoVCInfoCHType
OBJECT-TYPE
Service Type:TV service/ Radio service.
1.3.6.1.4.1.1429.2.2.5.5.4.5.1.7INTEGER {tv(1), radio(2), other(3)}read-onlycurrent
siInfoVCInfoECMPID
OBJECT-TYPE
Service Information VC Entitlement Control Message Program ID.
1.3.6.1.4.1.1429.2.2.5.5.4.5.1.8DisplayString (SIZE(0..32))read-onlycurrent
siInfoVCInfoAuthorized
OBJECT-TYPE
Service List: Channel Authorized: Yes/No.
1.3.6.1.4.1.1429.2.2.5.5.4.5.1.9INTEGER {no(1), yes(2)}read-onlycurrent