CISCO-DMN-DSG-TRANSCODE-MIB
- Registered at
- 1.3.6.1.4.1.1429.2.2.5.37
- Last updated
- 2013-07-10 12:20
- Organization
- Cisco Systems, Inc.
- Revisions
- 2013-07-10 12:20, 2012-03-20 18:00, 2010-10-13 08:00, 2010-08-24 07:00
- Namespace
- cisco
- Source file
CISCO-DMN-DSG-TRANSCODE-MIB- Digest
sha256:e001403adebdc8d7ed91fd546f8a4708304c11e9b373b51aaeb7803ce7787339
Description
Cisco Transcode MIB.
Contact
Cisco Systems, Inc. Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 NETS E-mail: cs-ipsla@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-DMN-DSG-ROOT-MIB | ciscoDSGUtilities |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-DMN-DSG-ROOT-MIB CISCO-DMN-DSG-TRANSCODE-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| transcoderInfo OBJECT-IDENTITY | 1.3.6.1.4.1.1429.2.2.5.37.1 | |||
| transcoderLOIAction OBJECT-TYPE Select whether outputs should transmit black or not transmit any data when there is a loss of input. | 1.3.6.1.4.1.1429.2.2.5.37.1.1 | INTEGER {blackOutput(1), noOutput(2)} | read-write | current |
| transcoderTable OBJECT-IDENTITY | 1.3.6.1.4.1.1429.2.2.5.37.2 | |||
| transcoderCfgTable OBJECT-TYPE Transcoder Configuration Table. | 1.3.6.1.4.1.1429.2.2.5.37.2.1 | not-accessible | current | |
| transcoderCfgEntry OBJECT-TYPE Entry for Transcoder configuration table. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1 | not-accessible | current | |
| transcoderCfgIndex OBJECT-TYPE Transcoder index. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.1 | Integer32 (1..8) | read-only | current |
| transcoderCfgApplyInband OBJECT-TYPE Apply in band transcoder parameters. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.2 | INTEGER {no(1), yes(2)} | read-write | current |
| transcoderCfgVRes OBJECT-TYPE Selection for Vertical resolution. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.3 | INTEGER {auto(1), hdOut(4), sdOut(5)} | read-write | current |
| transcoderCfgCCPkt1 OBJECT-TYPE Transcode Closed Caption Packet 1. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.4 | INTEGER {none(1), ccCEA708(2), ccSCTE20(3)} | read-write | current |
| transcoderCfgCCPkt2 OBJECT-TYPE Transcode Closed Caption Packet 2. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.5 | INTEGER {none(1), ccCEA708(2), ccSCTE20(3)} | read-write | current |
| transcoderCfgCCPkt3 OBJECT-TYPE Transcode Closed Caption Packet 3. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.6 | INTEGER {none(1), ccCEA708(2), ccSCTE20(3)} | read-only | current |
| transcoderCfgPCRRate OBJECT-TYPE PCR insertion rate in milliseconds. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.7 | INTEGER (10..1000) | read-only | current |
| transcoderCfgHDHRes OBJECT-TYPE High Definition Horizontal Resolution. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.8 | INTEGER {threeQuarter(1440), full(1920)} | read-write | current |
| transcoderCfgHDBitrateMode OBJECT-TYPE HD Bit rate mode selection : Constant Bit Rate( cbr )/ Variable Bit Rate ( vbr ). | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.9 | INTEGER {cbr(1), vbr(2)} | read-write | current |
| transcoderCfgHDBitRate OBJECT-TYPE HD bit rate in steps of 400bps. The Lower Limit is 8Mbps for D9859 and 10Mbps for D9858. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.10 | INTEGER (8000000..25000000) | read-write | current |
| transcoderCfgHDGOP OBJECT-TYPE HD GOP selection. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.11 | INTEGER {iFrameSync(1), userGop(2)} | read-write | current |
| transcoderCfgHDManualGOP OBJECT-TYPE HD Manual GOP selection. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.12 | INTEGER {manualGOP10(10), manualGOP122(122), manualGOP152(152), manualGOP242(242), manualGOP302(302)} | read-write | current |
| transcoderCfgHD32PullDown OBJECT-TYPE 3-2 Pulldown enabling. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.13 | INTEGER {disable(1), enable(2)} | read-write | current |
| transcoderCfgHDAspectRatio OBJECT-TYPE HD Output Aspect ratio. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.14 | INTEGER {fourThird(1), sixteenNinth(2)} | read-only | current |
| transcoderCfgHDARConversion OBJECT-TYPE HD Aspect ratio conversion. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.15 | INTEGER {none(1), auto(2), autoAFD(3), fourByThreeLetterBox(4), fourByThreePillarBox(5), fourteenByNine(6), fourByThreeFullHeight(7), sixteenByNineFullWidth(8)} | read-only | current |
| transcoderCfgHDVideoPreproc OBJECT-TYPE Transcode HD Video Pre-processing. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.16 | INTEGER {none(1), deBlock(2), mosquito(3), edgeEnhancement(4)} | read-only | current |
| transcoderCfgSDHRes OBJECT-TYPE Standard Definition Horizontal Resolution. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.17 | INTEGER {threeHundredAndFiftyTwo(352), fourHundredAndEighty(480), fiveHundredAndTwentyEight(528), fiveHundredAndFourtyFour(544), sevenHundredAndFour(704), sevenHundredAndTwenty(720)} | read-write | current |
| transcoderCfgSDBitRateMode OBJECT-TYPE Transcode SD bit rate mode : Constant Bit Rate mode ( cbr )/ Variable Bit Rate mode ( vbr ). | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.18 | INTEGER {cbr(1), vbr(2)} | read-write | current |
| transcoderCfgSDBitRate OBJECT-TYPE SD Bit rate in steps of 400. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.19 | INTEGER (2000000..15000000) | read-write | current |
| transcoderCfgSDGOP OBJECT-TYPE Transcode SD Group of Pictures-Format : Transparent/ Manual. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.20 | INTEGER {iFrameSync(1), userGOPmn(2)} | read-write | current |
| transcoderCfgSDManualGOP OBJECT-TYPE Transcode SD Manual Group of Pictures - Format values. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.21 | INTEGER {manualgop10(10), manualgop122(122), manualgop152(152), manualgop242(242), manualgop302(302)} | read-write | current |
| transcoderCfgSD32PullDown OBJECT-TYPE Transcode SD 3:2 Pulldown: Enabled/ disabled. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.22 | INTEGER {disabled(1), enabled(2)} | read-write | current |
| transcoderCfgSDAspectRatio OBJECT-TYPE Transcode SD Aspect ratio. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.23 | INTEGER {fourThird(1), sixteenNinth(2)} | read-write | current |
| transcoderCfgSDARConversion OBJECT-TYPE Transcode SD Aspect ratio conversion. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.24 | INTEGER {none(1), auto(2), autoAFD(3), fourByThreeLetterBox(4), fourByThreePillarBox(5), fourteenByNine(6), fourByThreeFullHeight(7), sixteenByNineFullWidth(8)} | read-write | current |
| transcoderCfgSDVideoPreproc OBJECT-TYPE Transcode SD Video Pre-processing. | 1.3.6.1.4.1.1429.2.2.5.37.2.1.1.25 | INTEGER {none(1), deBlock(2), mosquito(3), edgeEnhancement(4)} | read-only | current |
| transcoderStatusTable OBJECT-TYPE Transcoder status Table. | 1.3.6.1.4.1.1429.2.2.5.37.2.2 | not-accessible | current | |
| transcoderStatusEntry OBJECT-TYPE Entry for transcoder status table. | 1.3.6.1.4.1.1429.2.2.5.37.2.2.1 | not-accessible | current | |
| transcoderStatusIndex OBJECT-TYPE Trancoder status index. | 1.3.6.1.4.1.1429.2.2.5.37.2.2.1.1 | Integer32 (1..8) | read-only | current |
| transcoderStatusVideoStream OBJECT-TYPE Incoming stream format. | 1.3.6.1.4.1.1429.2.2.5.37.2.2.1.2 | INTEGER {unknown(1), sd480i2997(2), sd480i3000(3), sd576i2500(4), hd720p5000(5), hd720p5994(6), hd720p6000(7), hd1080i2500(8), hd1080i2997(9), hd1080i3000(10), unsupported(11)} | read-only | current |
| transcoderSubtTable OBJECT-TYPE Transcoder Subtitle Table. | 1.3.6.1.4.1.1429.2.2.5.37.2.3 | not-accessible | current | |
| transcoderSubtEntry OBJECT-TYPE Entry for transcoder subtitle burn-in table. | 1.3.6.1.4.1.1429.2.2.5.37.2.3.1 | not-accessible | current | |
| transcoderSubtIndex OBJECT-TYPE Trancoder subtitle burn-in index. | 1.3.6.1.4.1.1429.2.2.5.37.2.3.1.1 | Integer32 (1..8) | read-only | current |
| transcoderSubtOpMode OBJECT-TYPE Subtitle Burn-In Subtitles Mode: On/Off/Imitext/DVB. | 1.3.6.1.4.1.1429.2.2.5.37.2.3.1.2 | INTEGER {off(1), on(2), imiText(3), dvb(4)} | read-write | current |
| transcoderSubtLangMenu OBJECT-TYPE Subtitle Burn-In Language Preference by Language List, PMT Order or Manual Entry. | 1.3.6.1.4.1.1429.2.2.5.37.2.3.1.3 | INTEGER {languageList(1), languageEntry(2), pmtOrder(3)} | read-write | current |
| transcoderSubtLangList OBJECT-TYPE Subtitle Burn-In MPEG Languages Codes from the Language List. | 1.3.6.1.4.1.1429.2.2.5.37.2.3.1.4 | INTEGER {ara(1), btk(2), ben(3), bul(4), chi(5), cze(6), dan(7), dut(8), eng(9), fin(10), fre(11), ger(12), gre(13), heb(14), hin(15), hun(16), ice(17), ind(18), ita(19), jpn(20), kor(21), may(22), mul(23), nor(24), per(25), pol(26), por(27), rum(28), rus(29), san(30), scc(31), sin(32), slo(33), som(35), spa(36), swe(37), tai(38), tam(39), tha(40), tur(41), ukr(42), vie(43)} | read-write | current |
| transcoderSubtPMTOrder OBJECT-TYPE Subtitle Burn-In For Multiple Subtitle PIDs Select 1st, 2nd, 3rd, etc. | 1.3.6.1.4.1.1429.2.2.5.37.2.3.1.5 | INTEGER {first(1), second(2), third(3), fourth(4), fifth(5), sixth(6), seventh(7), eighth(8)} | read-write | current |
| transcoderSubtManualEntry OBJECT-TYPE Subtitle Burn-In Preferred Language Code. | 1.3.6.1.4.1.1429.2.2.5.37.2.3.1.6 | DisplayString (SIZE(0..3)) | read-write | current |
| transcoderSubtImitextPos OBJECT-TYPE Subtitle Burn-In Imitext Positioning: Standard/Extended. | 1.3.6.1.4.1.1429.2.2.5.37.2.3.1.7 | INTEGER {standard(1), extended(2)} | read-write | current |
| transcoderSubtForeGround OBJECT-TYPE Subtitle Burn-In Imitext Foreground Colour: Yellow/White/Auto. | 1.3.6.1.4.1.1429.2.2.5.37.2.3.1.8 | INTEGER {auto(1), yellow(2), white(3)} | read-write | current |
| transcoderSubtBackGround OBJECT-TYPE Subtitle Burn-In Imitext Background Colour: None/Auto/Shadow/Opaque/Semi. | 1.3.6.1.4.1.1429.2.2.5.37.2.3.1.9 | INTEGER {none(1), auto(2), shadow(3), opaque(4), semi(5)} | read-write | current |