CISCO-DMN-DSG-PROTOCOLS-MIB
- Registered at
- 1.3.6.1.4.1.1429.2.2.5.39
- Last updated
- 2013-07-10 19:03
- Organization
- Cisco Systems, Inc.
- Revisions
- 2013-07-10 19:03, 2012-03-07 07:30
- Namespace
- cisco
- Source file
CISCO-DMN-DSG-PROTOCOLS-MIB- Digest
sha256:759608d51d277fd2f1c22771d9e4bd327def98c94bcdf346c435854f5124825d
Description
Cisco Routing MIB.
Contact
Cisco Systems, Inc. Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 NETS E-mail: cs-ipsla@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-DMN-DSG-ROOT-MIB | ciscoDSGUtilities |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-DMN-DSG-PROTOCOLS-MIB CISCO-DMN-DSG-ROOT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| protocolsCtrlTelnet OBJECT-TYPE Select whether to allow Telnet connections or not | 1.3.6.1.4.1.1429.2.2.5.39.1 | INTEGER {disable(1), enable(2)} | read-write | current |
| protocolsCtrlSSH OBJECT-TYPE Select whether to allow secure shell connections or not. | 1.3.6.1.4.1.1429.2.2.5.39.2 | INTEGER {disable(1), enable(2)} | read-write | current |
| protocolsCtrlHTTP OBJECT-TYPE Select whether to allow web connections or not and choose secure or unsecure mode. | 1.3.6.1.4.1.1429.2.2.5.39.3 | INTEGER {disable(1), enable(2), secure(3)} | read-write | current |
| protocolsCtrlSNMP OBJECT-TYPE Select whether to allow SNMP connections or not. | 1.3.6.1.4.1.1429.2.2.5.39.5 | INTEGER {disable(1), enable(2)} | read-write | current |
| protocolsCtrlRIP OBJECT-TYPE Select whether to allow RIPv2 protocol or not. | 1.3.6.1.4.1.1429.2.2.5.39.6 | INTEGER {disable(1), enable(2)} | read-write | current |
| protocolsCtrlMPE OBJECT-TYPE Select whether to allow MPE protocol or not and select a mode. | 1.3.6.1.4.1.1429.2.2.5.39.7 | INTEGER {fwdNone(1), fwdAll(2), fwdFiltered(3)} | read-write | current |
| protocolsCtrlIGMP OBJECT-TYPE Select whether to allow IGMP protocol or not. | 1.3.6.1.4.1.1429.2.2.5.39.8 | INTEGER {disable(1), v3(2), v2(3)} | read-write | current |
| protocolslTimeoutsIdleSessonGlobal OBJECT-TYPE Number of seconds after which an idle session will timeout. Enter 0 to never timeout. Minimum timeout is 30 seconds. | 1.3.6.1.4.1.1429.2.2.5.39.9 | INTEGER (0..1209600) | read-write | current |
| protocolsCtrlSyslog OBJECT-TYPE Select whether to allow Syslog and select a mode. | 1.3.6.1.4.1.1429.2.2.5.39.10 | INTEGER {disable(1), legacy(2), syslogTcp(3), syslogUdp(4)} | read-write | current |
| protocolsCtrlSyslogCfgIpAddr OBJECT-TYPE Syslog server entry IP Address. | 1.3.6.1.4.1.1429.2.2.5.39.11 | IpAddress | read-write | current |
| protocolsCtrlSyslogCfgPort OBJECT-TYPE Syslog server entry port number. | 1.3.6.1.4.1.1429.2.2.5.39.12 | Integer32 (1..65535) | read-write | current |