CISCO-DMN-DSG-DR-MIB
- Registered at
- 1.3.6.1.4.1.1429.2.2.5.43
- Last updated
- 2014-08-30 08:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2014-08-30 08:00
- Namespace
- cisco
- Source file
CISCO-DMN-DSG-DR-MIB- Digest
sha256:1d85f75abf20f1b01ee78d00eae0a58bcbbbdd7f0b13427861394896d7765fdb
Description
Cisco generic DR MIB.
Contact
Cisco Systems, Inc. Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 NETS E-mail: cs-ipsla@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-DMN-DSG-ROOT-MIB | ciscoDSGUtilities |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-DMN-DSG-DR-MIB CISCO-DMN-DSG-ROOT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| drGlobalCfg OBJECT-IDENTITY | 1.3.6.1.4.1.1429.2.2.5.43.1 | |||
| enable OBJECT-TYPE Disable/Enable Disaster Recovery Feature | 1.3.6.1.4.1.1429.2.2.5.43.1.1 | INTEGER {disable(1), enable(2)} | read-write | current |
| sigLockTime OBJECT-TYPE Signal Lock timer (In Seconds) | 1.3.6.1.4.1.1429.2.2.5.43.1.2 | INTEGER (5..255) | read-write | current |
| sigLossTime OBJECT-TYPE Signal Loss timer (In Seconds) | 1.3.6.1.4.1.1429.2.2.5.43.1.3 | INTEGER (5..2160000) | read-write | current |
| verifyTimer OBJECT-TYPE Verify timer (In Seconds) | 1.3.6.1.4.1.1429.2.2.5.43.1.4 | INTEGER (10..255) | read-write | current |
| profile OBJECT-TYPE Local/Uplink Disaster Recovery Profile | 1.3.6.1.4.1.1429.2.2.5.43.1.5 | INTEGER {local(1), uplink(2)} | read-write | current |
| backupTransportTable OBJECT-TYPE DR BackupTransport Configuration Table. | 1.3.6.1.4.1.1429.2.2.5.43.2 | not-accessible | current | |
| backupTransportEntry OBJECT-TYPE Entry for Disaster Recovery BackupTransport Configuration. | 1.3.6.1.4.1.1429.2.2.5.43.2.1 | not-accessible | current | |
| backupTransportIndex OBJECT-TYPE DR CSI record index | 1.3.6.1.4.1.1429.2.2.5.43.2.1.1 | Integer32 (1..3) | read-only | current |
| backupTransportSetIdx OBJECT-TYPE DR CSI Idx. | 1.3.6.1.4.1.1429.2.2.5.43.2.1.2 | Integer32 (1..32) | read-write | current |
| backupTransportDvbsFec OBJECT-TYPE DR DVBS Forward Error Correction: Forward Error Correction Rate. For DVB-S2 modulation only auto is applicable. For DVB-S modulation all options are applicable. | 1.3.6.1.4.1.1429.2.2.5.43.2.1.3 | INTEGER {oneHalf(1), twoThirds(3), threeQuarters(4), fiveSixths(6), sevenEigths(7), auto(10)} | read-write | current |
| backupTransportEwFlag OBJECT-TYPE DR E/W Flag | 1.3.6.1.4.1.1429.2.2.5.43.2.1.4 | INTEGER {east(1), west(2), notApplicable(3)} | read-write | current |
| backupTransportFrequency OBJECT-TYPE DR Frequency: The Satellite Downlink frequency in the range of 0 to 15000000 KHz in steps of 1 KHz.. | 1.3.6.1.4.1.1429.2.2.5.43.2.1.5 | Integer32 (0..15000000) | read-write | current |
| backupTransportRFInput OBJECT-TYPE DR Input: Select Input for tuning | 1.3.6.1.4.1.1429.2.2.5.43.2.1.6 | INTEGER {rf1(1), rf2(2), rf3(3), rf4(4)} | read-write | current |
| backupTransportModSys OBJECT-TYPE DR Modulation System. | 1.3.6.1.4.1.1429.2.2.5.43.2.1.7 | INTEGER {qpsk_dvb-s(1), qpsk_dvb-S2(2)} | read-write | current |
| backupTransportNetId OBJECT-TYPE Network Id. | 1.3.6.1.4.1.1429.2.2.5.43.2.1.8 | Integer32 (0..65535) | read-write | current |
| backupTransportOrbitalPos OBJECT-TYPE DR Orbital Position | 1.3.6.1.4.1.1429.2.2.5.43.2.1.9 | Integer32 (0..3600) | read-write | current |
| backupTransportOrbpolarization OBJECT-TYPE Orbital location Azimuth.The range is from 0 to 3600 in steps of 1. The scaling factor is 1 10th of a degree | 1.3.6.1.4.1.1429.2.2.5.43.2.1.10 | Integer32 (0..3600) | read-write | current |
| backupTransportSymbRate OBJECT-TYPE Data rate on the transport stream in millions of symbols per second. Range is from 10000 to 450000 hectoSym/second in steps of 1 hectoSym/second. ( 1 hecto = 10^2 ). | 1.3.6.1.4.1.1429.2.2.5.43.2.1.11 | Integer32 (10000..450000) | read-write | current |
| backupTransportRollOffFactor OBJECT-TYPE DR Rollof Factor:Alpha filtering - for DVB-S: 0.20/0.35, for DVB-S2: 0.20/0.25/0.35. Roll off with scaling factor of 1/100. | 1.3.6.1.4.1.1429.2.2.5.43.2.1.12 | INTEGER {f35(1), f20(3), f25(25)} | read-write | current |
| backupTransportRowstatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.1429.2.2.5.43.2.1.13 | INTEGER {active(1), inactive(2), delete(3), add(4)} | read-write | current |
| backupSetTable OBJECT-TYPE DR BackupSet Configuration Table. | 1.3.6.1.4.1.1429.2.2.5.43.3 | not-accessible | current | |
| backupSetEntry OBJECT-TYPE Entry for Disaster Recovery BackupSet Configuration. | 1.3.6.1.4.1.1429.2.2.5.43.3.1 | not-accessible | current | |
| backupSetPeid OBJECT-TYPE BackupSet PEId | 1.3.6.1.4.1.1429.2.2.5.43.3.1.1 | Integer32 (1..32) | read-only | current |
| backupSetRecid OBJECT-TYPE Backup Set Record Index | 1.3.6.1.4.1.1429.2.2.5.43.3.1.2 | Integer32 (1..32) | read-only | current |
| backupSetCsiidx OBJECT-TYPE CSI Index. | 1.3.6.1.4.1.1429.2.2.5.43.3.1.3 | Integer32 (1..32) | read-only | current |
| backupSetBkpch OBJECT-TYPE Backup Channel. | 1.3.6.1.4.1.1429.2.2.5.43.3.1.4 | Integer32 (0..65535) | read-write | current |
| backupSetBkpchDispText OBJECT-TYPE Backup Channel Display Text | 1.3.6.1.4.1.1429.2.2.5.43.3.1.5 | DisplayString (SIZE(0..8)) | read-only | current |
| backupSetRowStatus OBJECT-TYPE Backup Row Status. | 1.3.6.1.4.1.1429.2.2.5.43.3.1.6 | INTEGER {active(1), inactive(2)} | read-write | current |