CISCO-DMN-DSG-DISEQC-DISH-POSITION-MIB
- Registered at
- 1.3.6.1.4.1.1429.2.2.5.19
- Last updated
- 2010-08-30 11:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2010-08-30 11:00, 2010-03-22 05:00, 2010-02-12 12:00, 2009-12-07 12:00
- Namespace
- cisco
- Source file
CISCO-DMN-DSG-DISEQC-DISH-POSITION-MIB- Digest
sha256:6cc072cd01ddfc3f521d4ef7cc68b7cfdec9a15f1e034153c177b57b8170c093
Description
Cisco DiSEqC Dish Position MIB.
Contact
Cisco Systems, Inc. Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 NETS E-mail: cs-ipsla@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-DMN-DSG-ROOT-MIB | ciscoDSGUtilities |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-DMN-DSG-DISEQC-DISH-POSITION-MIB CISCO-DMN-DSG-ROOT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| diSEqCTable OBJECT-TYPE DiSEqC Table. | 1.3.6.1.4.1.1429.2.2.5.19.1 | not-accessible | current | |
| diSEqCEntry OBJECT-TYPE Entry for DiSEqC Table. | 1.3.6.1.4.1.1429.2.2.5.19.1.1 | not-accessible | current | |
| diSEqCInstance OBJECT-TYPE Instance for DiSEqC Table. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.1 | Integer32 (1) | not-accessible | current |
| diSEqCEnable OBJECT-TYPE DiSEqC On/off. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.2 | INTEGER {disable(1), enable(2)} | read-write | current |
| diSEqCDishPosition OBJECT-TYPE Absolute Dish Position in steps of 1. The scaling factor is 1/10. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.3 | Integer32 (0..750) | read-write | current |
| diSEqCPositionJog OBJECT-TYPE Dish position fine adjustment - amount of steps ( each step is 2 degrees ). This is a diSEqc control object. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.4 | INTEGER {writeOnly(1), coarseAdjustmentEast(2), coarseAdjustmentWest(3), fineAdjustmentEast(4), fineAdjustmentWest(5)} | read-write | current |
| diSEqCEWFlag OBJECT-TYPE Dish direction. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.5 | INTEGER {east(1), west(2), notApplicable(3)} | read-write | current |
| diSEqCSatSelect OBJECT-TYPE Satellite Select. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.6 | Integer32 (1..255) | read-write | current |
| diSEqCInstallerAction OBJECT-TYPE Installer Action. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.7 | INTEGER {none(1), continuousWestMovement(2), continuousEastMovement(3), stopMove(4), gotoAbsolutePositionWest(5), gotoAbsolutePositionEast(6), gotoReference(7), gotoSatellite(8), storeSatellite(9), clearLimits(10), storeEastLimits(11), storeWestLimits(12), calculatePosition(13)} | read-write | current |
| diSEqCUserAction OBJECT-TYPE User Action. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.8 | INTEGER {none(1), gotoSatellite(2)} | read-write | current |
| diSEqCMode OBJECT-TYPE Installation Mode,User has limited rights. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.9 | INTEGER {installer(1), user(2)} | read-write | current |
| diSEqCAction OBJECT-TYPE DiSEqC Control Action.Setting this MIB object to activate( 2 ) moves the dish to the position determined by the diSEqC setting parameters. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.10 | INTEGER {writeOnly(1), activate(2)} | read-write | current |
| diSEqCStatusMode OBJECT-TYPE DiSEqC Mode Status. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.11 | INTEGER {installer(1), user(2)} | read-only | current |
| diSEqCStatusDishPosition OBJECT-TYPE Dish Position Status.The range is from 0.0 to 75.0 in steps of 0.1. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.12 | DisplayString (SIZE(0..32)) | read-only | current |
| diSEqCStatusEastWestFlag OBJECT-TYPE DiSEqC East/West Flag Status. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.13 | INTEGER {east(1), west(2), notApplicable(3)} | read-only | current |
| diSEqCStatusLastAction OBJECT-TYPE DiSEqC Status - Last Action. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.14 | INTEGER {clear(1), coarseAdjustmentEast(2), coarseAdjustmenWest(3), fineAdjustmenEast(4), fineAdjustmentWest(5), installerAction(6), userAction(7)} | read-only | current |
| diSEqCStatusEnable OBJECT-TYPE DiSEqC Status - Enable Status. | 1.3.6.1.4.1.1429.2.2.5.19.1.1.15 | INTEGER {disabled(1), enabled(2)} | read-only | current |