CISCO-DMN-DSG-Cueing-MIB
- Registered at
- 1.3.6.1.4.1.1429.2.2.5.33
- Last updated
- 2010-08-30 08:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2010-08-30 08:00
- Namespace
- cisco
- Source file
CISCO-DMN-DSG-Cueing-MIB- Digest
sha256:d18344d4765777dc787762f570dcc473749e806510733a64d51bad37daf267fe
Description
Cisco Cueing MIB.
Contact
Cisco Systems, Inc. Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 NETS E-mail: cs-ipsla@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-DMN-DSG-ROOT-MIB | ciscoDSGUtilities |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-DMN-DSG-Cueing-MIB CISCO-DMN-DSG-ROOT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cueingMode OBJECT-TYPE Selection of Cueing Mode. | 1.3.6.1.4.1.1429.2.2.5.33.1 | INTEGER {trigger(1), tone(2)} | read-write | current |
| cueingTrigPol OBJECT-TYPE Selection of Cueing Trigger Polarity. | 1.3.6.1.4.1.1429.2.2.5.33.2 | INTEGER {low(1), high(2)} | read-write | current |
| cueingRepeatCnt OBJECT-TYPE Cueing Tone repeat count. | 1.3.6.1.4.1.1429.2.2.5.33.3 | Integer32 (1..3) | read-write | current |
| cueingTone OBJECT-TYPE Cueing Tone duration in milliseconds. | 1.3.6.1.4.1.1429.2.2.5.33.4 | Integer32 (0..80) | read-write | current |
| cueingSilence OBJECT-TYPE Silence duration in milliseconds. | 1.3.6.1.4.1.1429.2.2.5.33.5 | Integer32 (0..80) | read-write | current |
| cueingRelayMode OBJECT-TYPE Selection of Relay Mode. | 1.3.6.1.4.1.1429.2.2.5.33.6 | INTEGER {alarm(1), trigger(2)} | read-write | current |
| cueingRelayTrigBit OBJECT-TYPE Selection of Relay trigger bit. | 1.3.6.1.4.1.1429.2.2.5.33.7 | Integer32 (1..8) | read-write | current |
| cueingTestToneSequence OBJECT-TYPE Cueing test tone sequence. | 1.3.6.1.4.1.1429.2.2.5.33.8 | Integer32 (0..999) | read-write | current |
| cueingTestToneStartStop OBJECT-TYPE Cueing test tone start/stop. | 1.3.6.1.4.1.1429.2.2.5.33.9 | INTEGER {start(1), stop(2)} | read-write | current |
| cueingTestToneGo OBJECT-TYPE Cueing test tone go. | 1.3.6.1.4.1.1429.2.2.5.33.10 | INTEGER {no(1), yes(2)} | read-write | current |
| cueingTable OBJECT-IDENTITY | 1.3.6.1.4.1.1429.2.2.5.33.11 | |||
| cueingToneSeqTable OBJECT-TYPE Cueing Tone sequence Table. | 1.3.6.1.4.1.1429.2.2.5.33.11.1 | not-accessible | current | |
| cueingToneSeqEntry OBJECT-TYPE Entry for Cueing tone table. | 1.3.6.1.4.1.1429.2.2.5.33.11.1.1 | not-accessible | current | |
| cueingToneSeqNum OBJECT-TYPE Cueing Tone sequence number selection. | 1.3.6.1.4.1.1429.2.2.5.33.11.1.1.1 | Integer32 (1..16) | not-accessible | current |
| cueingToneSeqState OBJECT-TYPE Contact Tone Sequence state selection. | 1.3.6.1.4.1.1429.2.2.5.33.11.1.1.2 | INTEGER {disable(1), enable(2)} | read-write | current |
| cueingToneSeqTones OBJECT-TYPE Cueing Tone sequence tones. | 1.3.6.1.4.1.1429.2.2.5.33.11.1.1.3 | Integer32 (0..999) | read-write | current |
| cueingToneSeqMode OBJECT-TYPE Contact Tone Sequence mode selection. | 1.3.6.1.4.1.1429.2.2.5.33.11.1.1.4 | INTEGER {start(1), stop(2), both(3)} | read-write | current |
| cueingToneSeqDelay OBJECT-TYPE Cueing Tone sequence delay in seconds. | 1.3.6.1.4.1.1429.2.2.5.33.11.1.1.5 | Integer32 (1..255) | read-write | current |