CISCO-DLR-MIB
- Registered at
- 1.3.6.1.4.1.9.9.865
- Last updated
- 2019-09-11 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2019-09-11 00:00
- Namespace
- cisco
- Source file
CISCO-DLR-MIB- Digest
sha256:f9f5ee055222ad9c0e54ee9079a9047dd7957cd5a816490b3d649a026d3d987f
Description
The CISCO-DLR-MIB is used to monitor the Device Level Ring (DLR) and notifying their state change. The Device Level Ring Protocol (DLR) is a redundancy protocol for EtherNet/IP and operates on OSI Layer 2. It can detect bus faults in a single line topology compensated by activating a redundant communication path. Thus DLR allows to build fast recovering and redundant network topologies that do not influence the controlling applications
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-<list>@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-DLR-MIB CISCO-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DlrDeviceState TEXTUAL-CONVENTION Operational status of the DLR Device. undefined(0) Value is not valid. supBackup(1) DLR device is in Supervisor backup state. supActive(2) DLR device is in Supervisor active state. normalRing(3) DLR device is a normal ring device. nonDlr(4) Device is a non DLR device. | current | |||
| DlrGatewayDeviceState TEXTUAL-CONVENTION Operational status of the DLR Device. undefined(0) Value is not valid. gatewayIdle(1) DLR gateway device is in idle state. activeListen(2) DLR gateway device is in active listen state. activeNormal(3) DLR gateway device is in active normal state. fault(4) DLR gateway device is in fault state. backupNormal(5) DLR gateway device is in backup normal state. lossUplink(6) DLR gateway device is lost up link. partialNetworkfault(7) DLR gateway device partial network fault state | current | |||
| DlrGatewayDeviceStatus TEXTUAL-CONVENTION Operational status of the DLR ring. undefined(0) Value is not valid. nonGateway(1) Not a Gateway device. activeGateway(2) Device is a active gateway. backupGateway(3) Device is a backup gateway. faultGateway(4) Device is an fault gateway state. nonSupportedGateway(5) Device donot support gateway. partialFaultGateway(6) Device is a partial fault gateway. | current | |||
| DlrNetworkStatus TEXTUAL-CONVENTION Operational status of the DLR ring. undefined(0) Value is not valid. ringNormal(1) DLR ring is in normal state. ringFault(2) DLR ring is in fault state. ringUnexcpectedLoop(3) DLR ring is in unexpected loop. ringPartialFault(4) DLR ring is in partial fault state. ringRapidFaultRestore(5) DLR ring is in rapid fault restore cycle state. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoDlrMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.865.0 | |||
| ciscoDlrMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.865.1 | |||
| ciscoDlrRingTable OBJECT-TYPE This table contains one row per each Device Level redundancy ring configured on the device. | 1.3.6.1.4.1.9.9.865.1.1 | not-accessible | current | |
| ciscoDlrRingEntry OBJECT-TYPE Information about a particular DLR ring entry.Each entry provides objects (ciscoDlrRingId, ciscoDlrDomainName , ciscoDlrRingNetworkStatus, ciscoDlrRingDeviceState, ciscoDlrRingGatewayDeviceStatus and ciscoDlrRingGatewayDevicetate) to help an NMS identify and characterize the entry and objects. | 1.3.6.1.4.1.9.9.865.1.1.1 | not-accessible | current | |
| ciscoDlrRingIndex OBJECT-TYPE The index of the entry | 1.3.6.1.4.1.9.9.865.1.1.1.1 | Unsigned32 | not-accessible | current |
| ciscoDlrRingID OBJECT-TYPE A ring identifier of a DLR ring. | 1.3.6.1.4.1.9.9.865.1.1.1.2 | Unsigned32 | read-only | current |
| ciscoDlrRingName OBJECT-TYPE A textual description of DLR ring. This object should contain a string which identifies the dlr ring name. | 1.3.6.1.4.1.9.9.865.1.1.1.3 | DisplayString | read-only | current |
| ciscoDlrRingNetworkStatus OBJECT-TYPE Operational status of the DLR network. The different opertions status of are defined as part of DlrNetworkStatus. | 1.3.6.1.4.1.9.9.865.1.1.1.4 | DlrNetworkStatus | read-only | current |
| ciscoDlrRingDeviceState OBJECT-TYPE Operational status of the DLR Device. The different opertional state of the device is defined as part of DlrDeviceState. | 1.3.6.1.4.1.9.9.865.1.1.1.5 | DlrDeviceState | read-only | current |
| ciscoDlrRingGatewayDeviceStatus OBJECT-TYPE Operational status of the DLR Gateway Device. The different operational staus of the gateway device are defined as part of DlrGatewayStatus. | 1.3.6.1.4.1.9.9.865.1.1.1.6 | DlrGatewayDeviceStatus | read-only | current |
| ciscoDlrRingGatewayDeviceState OBJECT-TYPE Operational state of the DLR Gateway Device. The different opertional state are defined as part of DlrGatewayState. | 1.3.6.1.4.1.9.9.865.1.1.1.7 | DlrGatewayDeviceState | read-only | current |
| ciscoDlrMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.865.2 | |||
| ciscoDlrMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.865.2.1 | |||
| ciscoDlrMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.865.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| ciscoDlrRingStatus NOTIFICATION-TYPE A ciscoDlrRingSatus notification is generated when the value of ciscoDlrRingNetworkStatus is changed to Normal or Fault. The notification contains information of ciscoDlrRingID, ciscoDlrRingName, ciscoDlrNetworkStatus. | 1.3.6.1.4.1.9.9.865.0.1 | current |
| ciscoDlrRingSupervisorStatus NOTIFICATION-TYPE A ciscoDlrRingSupervisorSatus notification is generated when the value of ciscoDlrRingDeviceState is changed to ACTIVE or BACKUP. The notification contains ciscoDlrRingID, ciscoDlrRingName, ciscoDlrDeviceStatus. | 1.3.6.1.4.1.9.9.865.0.2 | current |
| ciscoDlrRingGatewayStatus NOTIFICATION-TYPE A ciscoDlrRingGatewaySatus notification is generated when the value of ciscoDlrRingGatewayDeviceState is changed to ACTIVE or BACKUP. The notification contains ciscoDlrRingID, ciscoDlrRingName, ciscoDlrGatewayDeviceStatus. | 1.3.6.1.4.1.9.9.865.0.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoDlrMIBModuleCompliance MODULE-COMPLIANCE This includes all the mandatory groups required for DLR mib | 1.3.6.1.4.1.9.9.865.2.1.1 | current |
| ciscoDlrMIBMainObjectGroup OBJECT-GROUP A collection of objects required for monitoring of DLR ring. | 1.3.6.1.4.1.9.9.865.2.2.1 | current |
| ciscoDlrMIBNotifyGroup NOTIFICATION-GROUP Collection of notification which indicates diffferent state changes of DLR ring, Supervisor Device, Gateway device. | 1.3.6.1.4.1.9.9.865.2.2.2 | current |