CISCO-DIAMETER-BASE-PROTOCOL-MIB
- Registered at
- 1.3.6.1.4.1.9.10.133
- Last updated
- 2006-08-24 00:01
- Organization
- Cisco Systems, Inc.
- Revisions
- 2006-08-24 00:01
- Namespace
- cisco
- Source file
CISCO-DIAMETER-BASE-PROTOCOL-MIB- Digest
sha256:44d5a1f0e36e6bf5b22aeded4b5f8eef54b107d44550556f1325ac5024017227
Description
The MIB module for entities implementing the Diameter Base Protocol. Initial Cisco'ized version of the IETF draft draft-zorn-dime-diameter-base-protocol-mib-00.txt.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-aaa@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoExperiment |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-DIAMETER-BASE-PROTOCOL-MIB CISCO-SMI INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoDiameterBasePMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.0 | |||
| ciscoDiameterBasePMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.1 | |||
| cdbpLocalCfgs OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.1.1 | |||
| cdbpLocalId OBJECT-TYPE The implementation identification string for the Diameter software in use on the system, for example; 'diameterd' | 1.3.6.1.4.1.9.10.133.1.1.1 | SnmpAdminString | read-only | current |
| cdbpLocalIpAddrTable OBJECT-TYPE The table listing the Diameter local host's IP Addresses. | 1.3.6.1.4.1.9.10.133.1.1.2 | not-accessible | current | |
| cdbpLocalIpAddrEntry OBJECT-TYPE A row entry representing a Diameter local host IP Address. | 1.3.6.1.4.1.9.10.133.1.1.2.1 | not-accessible | current | |
| cdbpLocalIpAddrIndex OBJECT-TYPE A number uniquely identifying the number of IP Addresses supported by this Diameter host. | 1.3.6.1.4.1.9.10.133.1.1.2.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpLocalIpAddrType OBJECT-TYPE The type of internet address stored in cdbpLocalIpAddress. | 1.3.6.1.4.1.9.10.133.1.1.2.1.2 | InetAddressType | read-only | current |
| cdbpLocalIpAddress OBJECT-TYPE The IP-Address of the host, which is of the type specified in cdbpLocalIpAddrType. | 1.3.6.1.4.1.9.10.133.1.1.2.1.3 | InetAddress | read-only | current |
| cdbpLocalTcpListenPort OBJECT-TYPE This object represents Diameter TCP 'listen' port. | 1.3.6.1.4.1.9.10.133.1.1.3 | Unsigned32 (1..65535) | read-only | current |
| cdbpLocalSctpListenPort OBJECT-TYPE This object represents Diameter SCTP 'listen' port. | 1.3.6.1.4.1.9.10.133.1.1.4 | Unsigned32 (1..65535) | read-only | current |
| cdbpLocalOriginHost OBJECT-TYPE This object represents the Local Origin Host. | 1.3.6.1.4.1.9.10.133.1.1.5 | SnmpAdminString | read-write | current |
| cdbpLocalRealm OBJECT-TYPE This object represents the Local Realm Name. | 1.3.6.1.4.1.9.10.133.1.1.6 | SnmpAdminString | read-only | current |
| cdbpRedundancyEnabled OBJECT-TYPE This parameter indicates if cisco redundancy has been enabled, it is enabled if set to true and disabled if set to false. | 1.3.6.1.4.1.9.10.133.1.1.7 | TruthValue | read-write | current |
| cdbpRedundancyInfraState OBJECT-TYPE This parameter indicates the current state of cisco redundancy infrastructure state. rfUnknown(0) - unknown state rfDisabled(1) - RF is not functioning at this time rfInitialization(2) - co-ordinating init with platform rfNegotiation(3) - initial negotiation with peer to determine active-standby rfStandbyCold(4) - peer is active, we're cold rfStandbyConfig(5) - sync config from active to standby rfStandbyFileSys(6) - sync file sys from active to standby rfStandbyBulk(7) - clients bulk sync from active to standby rfStandbyHot(8) - standby ready-n-able to be active rfActiveFast(9) - immediate notification of standby going active rfActiveDrain(10) - drain queued messages from peer rfActivePreconfig(11) - active and before config rfActivePostconfig(12) - active and post config rfActive(13) - actively processing new calls rfActiveExtraload(14) - actively processing new calls extra resources other Processing is failed and I have extra load. | 1.3.6.1.4.1.9.10.133.1.1.8 | INTEGER {rfUnknown(0), rfDisabled(1), rfInitialization(2), rfNegotiation(3), rfStandbyCold(4), rfStandbyConfig(5), rfStandbyFileSys(6), rfStandbyBulk(7), rfStandbyHot(8), rfActiveFast(9), rfActiveDrain(10), rfActivePreconfig(11), rfActivePostconfig(12), rfActive(13), rfActiveExtraload(14)} | read-only | current |
| cdbpRedundancyLastSwitchover OBJECT-TYPE This object represents the Last Switchover Time. | 1.3.6.1.4.1.9.10.133.1.1.9 | SnmpAdminString | read-only | current |
| cdbpLocalApplTable OBJECT-TYPE The table listing the Diameter applications supported by this server. | 1.3.6.1.4.1.9.10.133.1.1.10 | not-accessible | current | |
| cdbpLocalApplEntry OBJECT-TYPE A row entry representing a Diameter application on this server. | 1.3.6.1.4.1.9.10.133.1.1.10.1 | not-accessible | current | |
| cdbpLocalApplIndex OBJECT-TYPE A number uniquely identifying a supported Diameter application. Upon reload, cdbpLocalApplIndex values may be changed. | 1.3.6.1.4.1.9.10.133.1.1.10.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpLocalApplStorageType OBJECT-TYPE The storage type for this conceptual row. None of the columnar objects is writable when the conceptual row is permanent. | 1.3.6.1.4.1.9.10.133.1.1.10.1.2 | StorageType | read-create | current |
| cdbpLocalApplRowStatus OBJECT-TYPE The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdsgStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpLocalApplIndex has been set. cdbpLocalApplIndex may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpLocalApplStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpLocalApplStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpLocalApplStatus equal to values other than active(1) will be destroyed after timeout (5 minutes). | 1.3.6.1.4.1.9.10.133.1.1.10.1.3 | RowStatus | read-create | current |
| cdbpLocalVendorTable OBJECT-TYPE The table listing the vendor IDs supported by local Diameter. | 1.3.6.1.4.1.9.10.133.1.1.11 | not-accessible | current | |
| cdbpLocalVendorEntry OBJECT-TYPE A row entry representing a vendor ID supported by local Diameter. | 1.3.6.1.4.1.9.10.133.1.1.11.1 | not-accessible | current | |
| cdbpLocalVendorIndex OBJECT-TYPE A number uniquely identifying the vendor ID supported by local Diameter. Upon reload, cdbpLocalVendorIndex values may be changed. | 1.3.6.1.4.1.9.10.133.1.1.11.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpLocalVendorId OBJECT-TYPE The active vendor ID used for peer connections. diameterVendorIetf(0) - Diameter vendor id ietf diameterVendorCisco(9) - Diameter vendor id cisco diameterVendor3gpp(10415) - Diameter vendor id 3gpp diameterVendorVodafone(12645) - Diameter vendor id vodafone. | 1.3.6.1.4.1.9.10.133.1.1.11.1.2 | INTEGER {diameterVendorIetf(0), diameterVendorCisco(9), diameterVendor3gpp(10415), diameterVendorVodafone(12645)} | read-create | current |
| cdbpLocalVendorStorageType OBJECT-TYPE The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent. | 1.3.6.1.4.1.9.10.133.1.1.11.1.3 | StorageType | read-create | current |
| cdbpLocalVendorRowStatus OBJECT-TYPE The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpLocalVendorRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpLocalVendorId has been set. cdbpLocalVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpLocalVendorRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpLocalVendorRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpLocalVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes). | 1.3.6.1.4.1.9.10.133.1.1.11.1.4 | RowStatus | read-create | current |
| cdbpAppAdvToPeerTable OBJECT-TYPE The table listing the applications advertised by this host to each peer and the types of service supported: accounting, authentication or both. | 1.3.6.1.4.1.9.10.133.1.1.12 | not-accessible | current | |
| cdbpAppAdvToPeerEntry OBJECT-TYPE A row entry representing a discovered or configured Diameter peer server. | 1.3.6.1.4.1.9.10.133.1.1.12.1 | not-accessible | current | |
| cdbpAppAdvToPeerVendorId OBJECT-TYPE The IANA Enterprise Code value assigned to the vendor of the Diameter device. | 1.3.6.1.4.1.9.10.133.1.1.12.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpAppAdvToPeerIndex OBJECT-TYPE A number uniquely identifying the Diameter applications advertised as supported by this host to each peer. Upon reload, cdbpAppAdvToPeerIndex values may be changed. | 1.3.6.1.4.1.9.10.133.1.1.12.1.2 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpAppAdvToPeerServices OBJECT-TYPE The type of services supported for each application, accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication. | 1.3.6.1.4.1.9.10.133.1.1.12.1.3 | INTEGER {acct(1), auth(2), both(3)} | read-only | current |
| cdbpAppAdvToPeerStorageType OBJECT-TYPE The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent. | 1.3.6.1.4.1.9.10.133.1.1.12.1.4 | StorageType | read-create | current |
| cdbpAppAdvToPeerRowStatus OBJECT-TYPE The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpAppAdvToPeerRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpAppAdvToPeerVendorId has been set. cdbpAppAdvToPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpAppAdvToPeerRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpAppAdvToPeerRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpAppAdvToPeerRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes). | 1.3.6.1.4.1.9.10.133.1.1.12.1.5 | RowStatus | read-create | current |
| cdbpLocalStats OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.1.2 | |||
| cdbpLocalStatsTotalPacketsIn OBJECT-TYPE The total number of packets received by Diameter Base Protocol. | 1.3.6.1.4.1.9.10.133.1.2.1 | Counter32 | read-only | current |
| cdbpLocalStatsTotalPacketsOut OBJECT-TYPE The total number of packets transmitted by Diameter Base Protocol. | 1.3.6.1.4.1.9.10.133.1.2.2 | Counter32 | read-only | current |
| cdbpLocalStatsTotalUpTime OBJECT-TYPE This object represents the total time the Diameter server has been up until now. | 1.3.6.1.4.1.9.10.133.1.2.3 | TimeTicks | read-only | current |
| cdbpLocalResetTime OBJECT-TYPE If the server keeps persistent state (e.g., a process) and supports a 'reset' operation (e.g., can be told to re-read configuration files), this value will be the time elapsed (in hundredths of a second) since the server was 'reset'. For software that does not have persistence or does not support a 'reset' operation, this value will be zero. | 1.3.6.1.4.1.9.10.133.1.2.4 | TimeTicks | read-only | current |
| cdbpLocalConfigReset OBJECT-TYPE Status/action object to reinitialize any persistent server state. When set to reset(2), any persistent server state (such as a process) is reinitialized as if the server had just been started. This value will never be returned by a read operation. When read, one of the following values will be returned: other(1) - server in some unknown state. reset(2) - command to reinitialize server state. initializing(3) - server (re)initializing. running(4) - server currently running. | 1.3.6.1.4.1.9.10.133.1.2.5 | INTEGER {other(1), reset(2), initializing(3), running(4)} | read-write | current |
| cdbpPeerCfgs OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.1.3 | |||
| cdbpPeerTable OBJECT-TYPE The table listing information regarding the discovered or configured Diameter peer servers. | 1.3.6.1.4.1.9.10.133.1.3.1 | not-accessible | current | |
| cdbpPeerEntry OBJECT-TYPE A row entry representing a discovered or configured Diameter peer server. | 1.3.6.1.4.1.9.10.133.1.3.1.1 | not-accessible | current | |
| cdbpPeerIndex OBJECT-TYPE A number uniquely identifying each Diameter peer with which the host server communicates. Upon reload, cdbpPeerIndex values may be changed. | 1.3.6.1.4.1.9.10.133.1.3.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpPeerId OBJECT-TYPE The server identifier for the Diameter peer. It must be unique and non-empty. | 1.3.6.1.4.1.9.10.133.1.3.1.1.2 | SnmpAdminString | read-create | current |
| cdbpPeerPortConnect OBJECT-TYPE The connection port this server used to connect to the Diameter peer. If there is no active connection, this value will be zero(0). | 1.3.6.1.4.1.9.10.133.1.3.1.1.3 | Unsigned32 (0..65535) | read-only | current |
| cdbpPeerPortListen OBJECT-TYPE The port the server is listening on. | 1.3.6.1.4.1.9.10.133.1.3.1.1.4 | Unsigned32 (1..65535) | read-create | current |
| cdbpPeerProtocol OBJECT-TYPE The transport protocol (tcp/sctp) the Diameter peer is using. tcp(1) - Transmission Control Protocol sctp(2) - Stream Control Transmission Protocol. | 1.3.6.1.4.1.9.10.133.1.3.1.1.5 | INTEGER {tcp(1), sctp(2)} | read-only | current |
| cdbpPeerSecurity OBJECT-TYPE The security the Diameter peer is using. other(1) - Unknown Security Protocol. tls(2) - Transport Layer Security Protocol. ipsec(3) - Internet Protocol Security. | 1.3.6.1.4.1.9.10.133.1.3.1.1.6 | INTEGER {other(1), tls(2), ipsec(3)} | read-only | current |
| cdbpPeerFirmwareRevision OBJECT-TYPE Firmware revision of peer. If no firmware revision, the revision of the Diameter software module may be reported instead. | 1.3.6.1.4.1.9.10.133.1.3.1.1.7 | Unsigned32 (1..4294967295) | read-only | current |
| cdbpPeerStorageType OBJECT-TYPE The storage type for this conceptual row. Only cdbpPeerPortListen object is writable when the conceptual row is permanent. | 1.3.6.1.4.1.9.10.133.1.3.1.1.8 | StorageType | read-create | current |
| cdbpPeerRowStatus OBJECT-TYPE The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpPeerRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpPeerId has been set. cdbpPeerId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpPeerRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpPeerRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpPeerRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes). | 1.3.6.1.4.1.9.10.133.1.3.1.1.9 | RowStatus | read-create | current |
| cdbpPeerIpAddrTable OBJECT-TYPE The table listing the Diameter server IP Addresses. | 1.3.6.1.4.1.9.10.133.1.3.2 | not-accessible | current | |
| cdbpPeerIpAddrEntry OBJECT-TYPE A row entry representing peer Diameter server IP Addresses. | 1.3.6.1.4.1.9.10.133.1.3.2.1 | not-accessible | current | |
| cdbpPeerIpAddressIndex OBJECT-TYPE A number uniquely identifying the number of IP Addresses supported by all Diameter peers. | 1.3.6.1.4.1.9.10.133.1.3.2.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpPeerIpAddressType OBJECT-TYPE The type of address stored in diameterPeerIpAddress. | 1.3.6.1.4.1.9.10.133.1.3.2.1.2 | InetAddressType | read-only | current |
| cdbpPeerIpAddress OBJECT-TYPE The active IP Address(es) used for connections. | 1.3.6.1.4.1.9.10.133.1.3.2.1.3 | IpAddress | read-write | current |
| cdbpAppAdvFromPeerTable OBJECT-TYPE The table listing the applications advertised by each peer to this host and the types of service supported: accounting, authentication or both. | 1.3.6.1.4.1.9.10.133.1.3.3 | not-accessible | current | |
| cdbpAppAdvFromPeerEntry OBJECT-TYPE A row entry representing a discovered or configured Diameter peer server. | 1.3.6.1.4.1.9.10.133.1.3.3.1 | not-accessible | current | |
| cdbpAppAdvFromPeerVendorId OBJECT-TYPE The IANA Enterprise Code value assigned to the vendor of the Diameter device. | 1.3.6.1.4.1.9.10.133.1.3.3.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpAppAdvFromPeerIndex OBJECT-TYPE A number uniquely identifying the applications advertised as supported from each Diameter peer. | 1.3.6.1.4.1.9.10.133.1.3.3.1.2 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpAppAdvFromPeerType OBJECT-TYPE The type of services supported for each application, accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication. | 1.3.6.1.4.1.9.10.133.1.3.3.1.3 | INTEGER {acct(1), auth(2), both(3)} | read-only | current |
| cdbpPeerVendorTable OBJECT-TYPE The table listing the Vendor IDs supported by the peer. | 1.3.6.1.4.1.9.10.133.1.3.4 | not-accessible | current | |
| cdbpPeerVendorEntry OBJECT-TYPE A row entry representing a Vendor ID supported by the peer. | 1.3.6.1.4.1.9.10.133.1.3.4.1 | not-accessible | current | |
| cdbpPeerVendorIndex OBJECT-TYPE A number uniquely identifying the Vendor ID supported by the peer. Upon reload, cdbpPeerVendorIndex values may be changed. | 1.3.6.1.4.1.9.10.133.1.3.4.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpPeerVendorId OBJECT-TYPE The active vendor ID used for peer connections. diameterVendorIetf(0) - Diameter vendor id ietf diameterVendorCisco(9) - Diameter vendor id cisco diameterVendor3gpp(10415) - Diameter vendor id 3gpp diameterVendorVodafone(12645) - Diameter vendor id vodafone. | 1.3.6.1.4.1.9.10.133.1.3.4.1.2 | INTEGER {diameterVendorIetf(0), diameterVendorCisco(9), diameterVendor3gpp(10415), diameterVendorVodafone(12645)} | read-create | current |
| cdbpPeerVendorStorageType OBJECT-TYPE The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent. | 1.3.6.1.4.1.9.10.133.1.3.4.1.3 | StorageType | read-create | current |
| cdbpPeerVendorRowStatus OBJECT-TYPE The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpPeerVendorRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpPeerVendorId has been set. Also, a newly created row cannot be made active until the corresponding 'cdbpPeerIndex' has been set. cdbpPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpPeerVendorRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpPeerVendorRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpPeerVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes). | 1.3.6.1.4.1.9.10.133.1.3.4.1.4 | RowStatus | read-create | current |
| cdbpPeerStats OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.1.4 | |||
| cdbpPeerStatsTable OBJECT-TYPE The table listing the Diameter peer statistics. | 1.3.6.1.4.1.9.10.133.1.4.1 | not-accessible | current | |
| cdbpPeerStatsEntry OBJECT-TYPE A row entry representing a Diameter peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1 | not-accessible | current | |
| cdbpPeerStatsState OBJECT-TYPE Connection state in the Peer State Machine of the peer with which this Diameter server is communicating. closed(1) - Connection closed with this peer. waitConnAck(2) - Waiting for an acknowledgment from this peer. waitICEA(3) - Waiting for a Capabilities-Exchange- Answer from this peer. elect(4) - When the peer and the server are both trying to bring up a connection with each other at the same time. An election process begins which determines which socket remains open. waitReturns(5) - Waiting for election returns. r-open(6) - Responder transport connection is used for communication. i-open(7) - Initiator transport connection is used for communication. closing(8) - Actively closing and doing cleanup. | 1.3.6.1.4.1.9.10.133.1.4.1.1.1 | INTEGER {closed(1), waitConnAck(2), waitICEA(3), elect(4), waitReturns(5), rOpen(6), iOpen(7), closing(8)} | read-only | current |
| cdbpPeerStatsStateDuration OBJECT-TYPE This object represents the Peer state duration. | 1.3.6.1.4.1.9.10.133.1.4.1.1.2 | TimeTicks | read-only | current |
| cdbpPeerStatsLastDiscCause OBJECT-TYPE The last cause for a peers disconnection. rebooting(1) - A scheduled reboot is imminent. busy(2) - The peer's internal resources are constrained, and it has determined that the transport connection needs to be shutdown. doNotWantToTalk(3) - The peer has determined that it does not see a need for the transport connection to exist, since it does not expect any messages to be exchanged in the foreseeable future. electionLost(4) - The peer has determined that it has lost the election process and has therefore disconnected the transport connection. | 1.3.6.1.4.1.9.10.133.1.4.1.1.3 | INTEGER {rebooting(1), busy(2), doNotWantToTalk(3), election(4)} | read-only | current |
| cdbpPeerStatsWhoInitDisconnect OBJECT-TYPE Did the host or peer initiate the disconnect? host(1) - If this server initiated the disconnect. peer(2) - If the peer with which this server was connected initiated the disconnect. | 1.3.6.1.4.1.9.10.133.1.4.1.1.4 | INTEGER {host(1), peer(2)} | read-only | current |
| cdbpPeerStatsDWCurrentStatus OBJECT-TYPE This object indicates the connection status. okay(1) - Indicates the connection is presumed working. suspect(2) - Indicates the connection is possibly congested or down. down(3) - The peer is no longer reachable, causing the transport connection to be shutdown. reopen(4) - Three watchdog messages are exchanged with accepted round trip times, and the connection to the peer is considered stabilized. | 1.3.6.1.4.1.9.10.133.1.4.1.1.5 | INTEGER {okay(1), suspect(2), down(3), reopen(4)} | read-only | current |
| cdbpPeerStatsTimeoutConnAtmpts OBJECT-TYPE If there is no transport connection with a peer, this is the number of times the server attempts to connect to that peer. This is reset on disconnection. | 1.3.6.1.4.1.9.10.133.1.4.1.1.6 | Counter32 | read-only | current |
| cdbpPeerStatsASRsIn OBJECT-TYPE Abort-Session-Request messages received from the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.7 | Counter32 | read-only | current |
| cdbpPeerStatsASRsOut OBJECT-TYPE Abort-Session-Request messages sent to the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.8 | Counter32 | read-only | current |
| cdbpPeerStatsASAsIn OBJECT-TYPE Number of Abort-Session-Answer messages received from the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.9 | Counter32 | read-only | current |
| cdbpPeerStatsASAsOut OBJECT-TYPE Number of Abort-Session-Answer messages sent to the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.10 | Counter32 | read-only | current |
| cdbpPeerStatsACRsIn OBJECT-TYPE Number of Accounting-Request messages received from the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.11 | Counter32 | read-only | current |
| cdbpPeerStatsACRsOut OBJECT-TYPE Number of Accounting-Request messages sent to the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.12 | Counter32 | read-only | current |
| cdbpPeerStatsACAsIn OBJECT-TYPE Number of Accounting-Answer messages received from the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.13 | Counter32 | read-only | current |
| cdbpPeerStatsACAsOut OBJECT-TYPE Number of Accounting-Answer messages sent to the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.14 | Counter32 | read-only | current |
| cdbpPeerStatsCERsIn OBJECT-TYPE Number of Capabilities-Exchange-Request messages received from the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.15 | Counter32 | read-only | current |
| cdbpPeerStatsCERsOut OBJECT-TYPE Number of Capabilities-Exchange-Request messages sent to the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.16 | Counter32 | read-only | current |
| cdbpPeerStatsCEAsIn OBJECT-TYPE Number of Capabilities-Exchange-Answer messages received from the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.17 | Counter32 | read-only | current |
| cdbpPeerStatsCEAsOut OBJECT-TYPE Number of Capabilities-Exchange-Answer messages sent to the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.18 | Counter32 | read-only | current |
| cdbpPeerStatsDWRsIn OBJECT-TYPE Number of Device-Watchdog-Request messages received from the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.19 | Counter32 | read-only | current |
| cdbpPeerStatsDWRsOut OBJECT-TYPE Number of Device-Watchdog-Request messages sent to the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.20 | Counter32 | read-only | current |
| cdbpPeerStatsDWAsIn OBJECT-TYPE Number of Device-Watchdog-Answer messages received from the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.21 | Counter32 | read-only | current |
| cdbpPeerStatsDWAsOut OBJECT-TYPE Number of Device-Watchdog-Answer messages sent to the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.22 | Counter32 | read-only | current |
| cdbpPeerStatsDPRsIn OBJECT-TYPE Number of Disconnect-Peer-Request messages received. | 1.3.6.1.4.1.9.10.133.1.4.1.1.23 | Counter32 | read-only | current |
| cdbpPeerStatsDPRsOut OBJECT-TYPE Number of Disconnect-Peer-Request messages sent. | 1.3.6.1.4.1.9.10.133.1.4.1.1.24 | Counter32 | read-only | current |
| cdbpPeerStatsDPAsIn OBJECT-TYPE Number of Disconnect-Peer-Answer messages received. | 1.3.6.1.4.1.9.10.133.1.4.1.1.25 | Counter32 | read-only | current |
| cdbpPeerStatsDPAsOut OBJECT-TYPE Number of Disconnect-Peer-Answer messages sent. | 1.3.6.1.4.1.9.10.133.1.4.1.1.26 | Counter32 | read-only | current |
| cdbpPeerStatsRARsIn OBJECT-TYPE Number of Re-Auth-Request messages received. | 1.3.6.1.4.1.9.10.133.1.4.1.1.27 | Counter32 | read-only | current |
| cdbpPeerStatsRARsOut OBJECT-TYPE Number of Re-Auth-Request messages sent. | 1.3.6.1.4.1.9.10.133.1.4.1.1.28 | Counter32 | read-only | current |
| cdbpPeerStatsRAAsIn OBJECT-TYPE Number of Re-Auth-Answer messages received. | 1.3.6.1.4.1.9.10.133.1.4.1.1.29 | Counter32 | read-only | current |
| cdbpPeerStatsRAAsOut OBJECT-TYPE Number of Re-Auth-Answer messages sent. | 1.3.6.1.4.1.9.10.133.1.4.1.1.30 | Counter32 | read-only | current |
| cdbpPeerStatsSTRsIn OBJECT-TYPE Number of Session-Termination-Request messages received from the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.31 | Counter32 | read-only | current |
| cdbpPeerStatsSTRsOut OBJECT-TYPE Number of Session-Termination-Request messages sent to the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.32 | Counter32 | read-only | current |
| cdbpPeerStatsSTAsIn OBJECT-TYPE Number of Session-Termination-Answer messages received from the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.33 | Counter32 | read-only | current |
| cdbpPeerStatsSTAsOut OBJECT-TYPE Number of Session-Termination-Answer messages sent to the peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.34 | Counter32 | read-only | current |
| cdbpPeerStatsDWReqTimer OBJECT-TYPE Device-Watchdog Request Timer, which is the interval between packets sent to peers. | 1.3.6.1.4.1.9.10.133.1.4.1.1.35 | TimeTicks | read-only | current |
| cdbpPeerStatsRedirectEvents OBJECT-TYPE Redirect Event count, which is the number of redirects sent from a peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.36 | Counter32 | read-only | current |
| cdbpPeerStatsAccDupRequests OBJECT-TYPE The number of duplicate Diameter Accounting-Request packets received. | 1.3.6.1.4.1.9.10.133.1.4.1.1.37 | Counter32 | read-only | current |
| cdbpPeerStatsMalformedReqsts OBJECT-TYPE The number of malformed Diameter packets received. | 1.3.6.1.4.1.9.10.133.1.4.1.1.38 | Counter32 | read-only | current |
| cdbpPeerStatsAccsNotRecorded OBJECT-TYPE The number of Diameter Accounting-Request packets which were received and responded to but not recorded. | 1.3.6.1.4.1.9.10.133.1.4.1.1.39 | Counter32 | read-only | current |
| cdbpPeerStatsAccRetrans OBJECT-TYPE The number of Diameter Accounting-Request packets retransmitted to this Diameter server. | 1.3.6.1.4.1.9.10.133.1.4.1.1.40 | Counter32 | read-only | current |
| cdbpPeerStatsTotalRetrans OBJECT-TYPE The number of Diameter packets retransmitted to this Diameter server, not to include Diameter Accounting-Request packets retransmitted. | 1.3.6.1.4.1.9.10.133.1.4.1.1.41 | Counter32 | read-only | current |
| cdbpPeerStatsAccPendReqstsOut OBJECT-TYPE The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response, a timeout or a retransmission. | 1.3.6.1.4.1.9.10.133.1.4.1.1.42 | Gauge32 | read-only | current |
| cdbpPeerStatsAccReqstsDropped OBJECT-TYPE The number of Accounting-Requests to this server that have been dropped. | 1.3.6.1.4.1.9.10.133.1.4.1.1.43 | Counter32 | read-only | current |
| cdbpPeerStatsHByHDropMessages OBJECT-TYPE An answer message that is received with an unknown hop-by-hop identifier. Does not include accounting requests dropped. | 1.3.6.1.4.1.9.10.133.1.4.1.1.44 | Counter32 | read-only | current |
| cdbpPeerStatsEToEDupMessages OBJECT-TYPE Duplicate answer messages that are to be locally consumed. Does not include duplicate accounting requests received. | 1.3.6.1.4.1.9.10.133.1.4.1.1.45 | Counter32 | read-only | current |
| cdbpPeerStatsUnknownTypes OBJECT-TYPE The number of Diameter packets of unknown type which were received. | 1.3.6.1.4.1.9.10.133.1.4.1.1.46 | Counter32 | read-only | current |
| cdbpPeerStatsProtocolErrors OBJECT-TYPE This object represents the Number of protocol errors returned to peer, but not including redirects. | 1.3.6.1.4.1.9.10.133.1.4.1.1.47 | Counter32 | read-only | current |
| cdbpPeerStatsTransientFailures OBJECT-TYPE This object represents the transient failure count. | 1.3.6.1.4.1.9.10.133.1.4.1.1.48 | Counter32 | read-only | current |
| cdbpPeerStatsPermanentFailures OBJECT-TYPE This object represents the Number of permanent failures returned to peer. | 1.3.6.1.4.1.9.10.133.1.4.1.1.49 | Counter32 | read-only | current |
| cdbpPeerStatsTransportDown OBJECT-TYPE This object represents the Number of unexpected transport failures. | 1.3.6.1.4.1.9.10.133.1.4.1.1.50 | Counter32 | read-only | current |
| cdbpRealmCfgs OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.1.5 | |||
| cdbpRealmKnownPeersTable OBJECT-TYPE The table listing the Diameter realms and known peers. | 1.3.6.1.4.1.9.10.133.1.5.1 | not-accessible | current | |
| cdbpRealmKnownPeersEntry OBJECT-TYPE A row entry representing a Diameter realm and known peers. | 1.3.6.1.4.1.9.10.133.1.5.1.1 | not-accessible | current | |
| cdbpRealmKnownPeersIndex OBJECT-TYPE A number uniquely identifying a peer known to this realm. Upon reload, cdbpRealmKnownPeersIndex values may be changed. | 1.3.6.1.4.1.9.10.133.1.5.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpRealmKnownPeers OBJECT-TYPE The index of the peer this realm knows about. This is an ordered list, where the ordering signifies the order in which the peers are tried. Same as the cdbpPeerIndex | 1.3.6.1.4.1.9.10.133.1.5.1.1.2 | Unsigned32 (1..4294967295) | read-only | current |
| cdbpRealmKnownPeersChosen OBJECT-TYPE How the realm chooses which peer to send packets to. roundRobin(1) - The peer used for each transaction is selected based on the order in which peers are configured. loadBalance(2) - The peer used for each transaction is based on the load metric (maybe implementation dependent) of all peers defined for the realm, with the least loaded server selected first. firstPreferred(3) - The first defined server is always used for transactions unless failover occurs. mostRecentFirst(4) - The most recently used server is used first for each transaction. | 1.3.6.1.4.1.9.10.133.1.5.1.1.3 | INTEGER {roundRobin(1), loadBalance(2), firstPreferred(3), mostRecentFirst(4), other(5)} | read-only | current |
| cdbpRealmStats OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.1.6 | |||
| cdbpRealmMessageRouteTable OBJECT-TYPE The table listing the Diameter realm-based message route information. | 1.3.6.1.4.1.9.10.133.1.6.1 | not-accessible | current | |
| cdbpRealmMessageRouteEntry OBJECT-TYPE A row entry representing a Diameter realm based message route server. | 1.3.6.1.4.1.9.10.133.1.6.1.1 | not-accessible | current | |
| cdbpRealmMessageRouteIndex OBJECT-TYPE A number uniquely identifying each realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cdbpRealmMessageRouteRealm OBJECT-TYPE This object represents the realm name | 1.3.6.1.4.1.9.10.133.1.6.1.1.2 | SnmpAdminString | read-only | current |
| cdbpRealmMessageRouteApp OBJECT-TYPE Application id used to route packets to this realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.3 | Unsigned32 (1..4294967295) | read-only | current |
| cdbpRealmMessageRouteType OBJECT-TYPE The types of service supported for each realm application: accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication. | 1.3.6.1.4.1.9.10.133.1.6.1.1.4 | INTEGER {acct(1), auth(2), both(3)} | read-only | current |
| cdbpRealmMessageRouteAction OBJECT-TYPE The action is used to identify how a message should be treated based on the realm, application and type. local(1) - Diameter messages that resolve to a route entry with the Local Action set to Local can be satisfied locally, and do not need to be routed to another server. relay(2) - All Diameter messages that fall within this category MUST be routed to a next-hop server, without modifying any non-routing AVPs. proxy(3) - All Diameter messages that fall within this category MUST be routed to a next-hop server. redirect(4) - Diameter messages that fall within this category MUST have the identity of the home Diameter server(s) appended, and returned to the sender of the message. | 1.3.6.1.4.1.9.10.133.1.6.1.1.5 | INTEGER {local(1), relay(2), proxy(3), redirect(4)} | read-only | current |
| cdbpRealmMessageRouteACRsIn OBJECT-TYPE Number of Accounting-Request messages received from the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.6 | Counter32 | read-only | current |
| cdbpRealmMessageRouteACRsOut OBJECT-TYPE Number of Accounting-Request messages sent to the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.7 | Counter32 | read-only | current |
| cdbpRealmMessageRouteACAsIn OBJECT-TYPE Number of Accounting-Answer messages received from the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.8 | Counter32 | read-only | current |
| cdbpRealmMessageRouteACAsOut OBJECT-TYPE Number of Accounting-Answer messages sent to the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.9 | Counter32 | read-only | current |
| cdbpRealmMessageRouteRARsIn OBJECT-TYPE Number of Re-Auth-Request messages received from the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.10 | Counter32 | read-only | current |
| cdbpRealmMessageRouteRARsOut OBJECT-TYPE Number of Re-Auth-Request messages sent to the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.11 | Counter32 | read-only | current |
| cdbpRealmMessageRouteRAAsIn OBJECT-TYPE Number of Re-Auth-Answer messages received from the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.12 | Counter32 | read-only | current |
| cdbpRealmMessageRouteRAAsOut OBJECT-TYPE Number of Re-Auth-Answer messages sent to the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.13 | Counter32 | read-only | current |
| cdbpRealmMessageRouteSTRsIn OBJECT-TYPE Number of Session-Termination-Request messages received from the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.14 | Counter32 | read-only | current |
| cdbpRealmMessageRouteSTRsOut OBJECT-TYPE Number of Session-Termination-Request messages sent to the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.15 | Counter32 | read-only | current |
| cdbpRealmMessageRouteSTAsIn OBJECT-TYPE Number of Session-Termination-Answer messages received from the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.16 | Counter32 | read-only | current |
| cdbpRealmMessageRouteSTAsOut OBJECT-TYPE Number of Session-Termination-Answer messages sent to the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.17 | Counter32 | read-only | current |
| cdbpRealmMessageRouteASRsIn OBJECT-TYPE Number of Abort-Session-Request messages received from the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.18 | Counter32 | read-only | current |
| cdbpRealmMessageRouteASRsOut OBJECT-TYPE Number of Abort-Session-Request messages sent to the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.19 | Counter32 | read-only | current |
| cdbpRealmMessageRouteASAsIn OBJECT-TYPE Number of Abort-Session-Answer messages received from the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.20 | Counter32 | read-only | current |
| cdbpRealmMessageRouteASAsOut OBJECT-TYPE Number of Abort-Session-Answer messages sent to the realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.21 | Counter32 | read-only | current |
| cdbpRealmMessageRouteAccRetrans OBJECT-TYPE The number of Diameter accounting packets retransmitted to this realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.22 | Counter32 | read-only | current |
| cdbpRealmMessageRouteAccDupReqsts OBJECT-TYPE The number of duplicate Diameter accounting packets sent to this realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.23 | Counter32 | read-only | current |
| cdbpRealmMessageRoutePendReqstsOut OBJECT-TYPE The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response, a timeout or a retransmission. | 1.3.6.1.4.1.9.10.133.1.6.1.1.24 | Gauge32 | read-only | current |
| cdbpRealmMessageRouteReqstsDrop OBJECT-TYPE The number of requests dropped by this realm. | 1.3.6.1.4.1.9.10.133.1.6.1.1.25 | Counter32 | read-only | current |
| cdbpTrapCfgs OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.1.7 | |||
| ciscoDiaBaseProtEnableProtocolErrorNotif OBJECT-TYPE Setting the value of this object to true(1) enables the ciscoDiaBaseProtProtocolErrorNotif notification. | 1.3.6.1.4.1.9.10.133.1.7.1 | TruthValue | read-write | current |
| ciscoDiaBaseProtEnableTransientFailureNotif OBJECT-TYPE Setting the value of this object to true(1) enables the ciscoDiaBaseProtTransientFailureNotif notification. | 1.3.6.1.4.1.9.10.133.1.7.2 | TruthValue | read-write | current |
| ciscoDiaBaseProtEnablePermanentFailureNotif OBJECT-TYPE Setting the value of this object to true(1) enables the ciscoDiaBaseProtPermanentFailureNotif notification. | 1.3.6.1.4.1.9.10.133.1.7.3 | TruthValue | read-write | current |
| ciscoDiaBaseProtEnablePeerConnectionDownNotif OBJECT-TYPE Setting the value of this object to true(1) enables the ciscoDiaBaseProtPeerConnectionDownNotif notification. | 1.3.6.1.4.1.9.10.133.1.7.4 | TruthValue | read-write | current |
| ciscoDiaBaseProtEnablePeerConnectionUpNotif OBJECT-TYPE Setting the value of this object to true(1) enables the ciscoDiaBaseProtPeerConnectionUpNotif notification. | 1.3.6.1.4.1.9.10.133.1.7.5 | TruthValue | read-write | current |
| ciscoDiameterBasePMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.2 | |||
| ciscoDiameterBasePMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.2.1 | |||
| ciscoDiameterBasePMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.133.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| ciscoDiaBaseProtProtocolErrorNotif NOTIFICATION-TYPE An ciscoDiaBaseProtProtocolErrorNotif notification is sent when both the following conditions are true: 1) the value of ciscoDiaBaseProtEnableProtocolErrorNotif is true(1) 2) the value of cdbpPeerStatsProtocolErrors changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. | 1.3.6.1.4.1.9.10.133.0.1 | current |
| ciscoDiaBaseProtTransientFailureNotif NOTIFICATION-TYPE An ciscoDiaBaseProtTransientFailureNotif notification is sent when both the following conditions are true: 1) the value of ciscoDiaBaseProtEnableTransientFailureNotif is true(1) 2) the value of cdbpPeerStatsTransientFailures changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. | 1.3.6.1.4.1.9.10.133.0.2 | current |
| ciscoDiaBaseProtPermanentFailureNotif NOTIFICATION-TYPE An ciscoDiaBaseProtPermanentFailureNotif notification is sent when both the following conditions are true: 1) the value of ciscoDiaBaseProtEnablePermanentFailureNotif is true(1) 2) the value of cdbpPeerStatsPermanentFailures changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. | 1.3.6.1.4.1.9.10.133.0.3 | current |
| ciscoDiaBaseProtPeerConnectionDownNotif NOTIFICATION-TYPE An ciscoDiaBaseProtPeerConnectionDownNotif notification is sent when both the following conditions are true: 1) the value of ciscoDiaBaseProtEnablePeerConnectionDownNotif is true(1) 2) cdbpPeerStatsState changes to closed(1). It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. | 1.3.6.1.4.1.9.10.133.0.4 | current |
| ciscoDiaBaseProtPeerConnectionUpNotif NOTIFICATION-TYPE An ciscoDiaBaseProtPeerConnectionUpNotif notification is sent when both the following conditions are true: 1) the value of ciscoDiaBaseProtEnablePeerConnectionUpNotif is true(1) 2) the value of cdbpPeerStatsState changes to either rOpen(6)or iOpen(7). It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. | 1.3.6.1.4.1.9.10.133.0.5 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoDiameterBasePMIBCompliance MODULE-COMPLIANCE The compliance statement for Diameter Base Protocol entities. | 1.3.6.1.4.1.9.10.133.2.1.1 | current |
| ciscoDiameterBasePMIBLocalCfgGroup OBJECT-GROUP A collection of objects providing configuration common to the server. | 1.3.6.1.4.1.9.10.133.2.2.1 | current |
| ciscoDiameterBasePMIBPeerCfgGroup OBJECT-GROUP A collection of objects providing configuration of the Diameter peers. | 1.3.6.1.4.1.9.10.133.2.2.2 | current |
| ciscoDiameterBasePMIBPeerStatsGroup OBJECT-GROUP A collection of objects providing statistics of the Diameter peers. | 1.3.6.1.4.1.9.10.133.2.2.3 | current |
| ciscoDiameterBasePMIBNotificationsGroup NOTIFICATION-GROUP The set of notifications which an agent is required to implement. | 1.3.6.1.4.1.9.10.133.2.2.4 | current |
| ciscoDiameterBasePMIBTrapCfgGroup OBJECT-GROUP A collection of objects providing configuration for base protocol notifications. | 1.3.6.1.4.1.9.10.133.2.2.5 | current |
| ciscoDiameterBasePMIBLocalCfgSkippedGroup OBJECT-GROUP A collection of objects providing configuration common to the server. | 1.3.6.1.4.1.9.10.133.2.2.6 | current |
| ciscoDiameterBasePMIBLocalStatsSkippedGroup OBJECT-GROUP A collection of objects providing statistics common to the server. | 1.3.6.1.4.1.9.10.133.2.2.7 | current |
| ciscoDiameterBasePMIBPeerCfgSkippedGroup OBJECT-GROUP A collection of objects providing configuration for Diameter peers. | 1.3.6.1.4.1.9.10.133.2.2.8 | current |
| ciscoDiameterBasePMIBPeerStatsSkippedGroup OBJECT-GROUP A collection of objects providing statistics of Diameter peers. | 1.3.6.1.4.1.9.10.133.2.2.9 | current |
| ciscoDiameterBasePMIBRealmCfgSkippedGroup OBJECT-GROUP A collection of objects providing configuration for realm message routing. | 1.3.6.1.4.1.9.10.133.2.2.10 | current |
| ciscoDiameterBasePMIBRealmStatsSkippedGroup OBJECT-GROUP A collection of objects providing statistics of realm message routing. | 1.3.6.1.4.1.9.10.133.2.2.11 | current |