CISCO-CIRCUIT-INTERFACE-MIB
- Registered at
- 1.3.6.1.4.1.9.9.160
- Last updated
- 2000-05-09 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2000-05-09 00:00
- Namespace
- cisco
- Source file
CISCO-CIRCUIT-INTERFACE-MIB- Digest
sha256:56a72f4ae06494b3871056a772d823dd9a946ef17636f9ebcd00bb3eb7567316
Description
The MIB module to configure the circuit description for an interface. The circuit description can be used to describe and identify circuits on interfaces like ATM, frame-relay etc.
Contact
Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-CIRCUIT-INTERFACE-MIB CISCO-SMI IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoCircuitInterfaceMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.160.1 | |||
| cciDescription OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.160.1.1 | |||
| cciDescriptionTable OBJECT-TYPE This table contains a circuit description to identify circuit based interfaces like ATM, Frame-Relay etc. The circuit description could be used for example, to correlate performance statistics associated with the corresponding interfaces. | 1.3.6.1.4.1.9.9.160.1.1.1 | not-accessible | current | |
| cciDescriptionEntry OBJECT-TYPE Each cciDescriptionEntry contains the circuit description for a particular circuit based interface. The entry is identified by the ifIndex which would typically correspond to circuit based interfaces. Interfaces with ifType equal to atm(37), frameRelay(32) frameRelayService(44) are some examples. Entries can only be created by management station action. Entries can be deleted by setting the cciStatus object to destroy(6). The agent will delete any cciEntry if the corresponding ifEntry is deleted. Entries are not maintained in any kind of NV-storage, and will not be recreated by the agent after a reboot. | 1.3.6.1.4.1.9.9.160.1.1.1.1 | not-accessible | current | |
| cciDescr OBJECT-TYPE The circuit description of the interface. It has no default value. | 1.3.6.1.4.1.9.9.160.1.1.1.1.1 | SnmpAdminString (SIZE(0..255)) | read-create | current |
| cciStatus OBJECT-TYPE The row status object, but with restricted values. Only two values are allowed for this object: createAndGo(4) and destroy(6). The row is created by specifying the value for cciDescr and setting this object to createAndGo(4). If the row creation is succesfull, the cciStatus would be active(1). In the active(1) state, the cciDescr can be modifed. The row is deleted by setting this object to destroy(6). | 1.3.6.1.4.1.9.9.160.1.1.1.1.2 | RowStatus | read-create | current |
| ciscoCircuitInterfaceMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.160.3 | |||
| ciscoCircuitInterfaceMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.160.3.1 | |||
| ciscoCircuitInterfaceMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.160.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoCircuitInterfaceMIBCompliance MODULE-COMPLIANCE The compliance statement for Cisco agents which implement the Cisco Circuit Interface MIB. | 1.3.6.1.4.1.9.9.160.3.1.1 | current |
| ciscoCircuitInterfaceGroup OBJECT-GROUP The Cisco Circuit Interface MIB objects. | 1.3.6.1.4.1.9.9.160.3.2.1 | current |