MIBs Depot

CISCO-CIPCMPC-MIB

Registered at
1.3.6.1.4.1.9.9.72
Last updated
1999-01-25 00:00
Organization
cisco IBU Engineering Working Group
Revisions
1999-01-25 00:00, 1998-01-06 00:00, 1997-02-09 00:00
Namespace
cisco
Source file
CISCO-CIPCMPC-MIB
Digest
sha256:f77fa6ff0dd2c6bcae83b93815d6e9272ba77a44ce9d38ef1f39597423042878

Description

This is the Management Information Base (MIB) module for objects used to manage the Cisco Multi-Path Channel (MPC) support on Cisco Mainframe Channel Connection (CMCC) cards, also called the CMPC feature. ------------------------------------------------- | Acronym Definitions: | | CIP = Channel Interface Processor | | CMPC = Cisco Multi-Path Channel | | HPR = High Performance Routing | | HPDT = High Performance Data Transfer | | ISR = Intermediate Session Routing | | MPC = Multi-Path Channel | | MPC+ = HPDT MPC | | SNA = Systems Network Architecture | | TG = Transmission Group | ------------------------------------------------- This MIB consists of the following tables: 1) CMPC Subchannel Administration 2) CMPC Subchannel Operational 3) CMPC TG Statistics Refer to the following MIBs for an understanding of Cisco channel terminology and Cisco CMCC terminology: CISCO-CHANNEL-MIB CISCO-CIPCSNA-MIB CISCO-CIPLAN-MIB CISCO-CIPTG-MIB

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com

Imports

FromSymbols
CISCO-CHANNEL-MIBcipCardDtrBrdIndex, cipCardEntryIndex, cipCardSubChannelIndex
CISCO-CIPCSNA-MIBChannelDevice, ChannelPath
CISCO-CIPTG-MIBChannelTgName
CISCO-SMIciscoMgmt
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TDomain, TEXTUAL-CONVENTION, TimeStamp

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-CHANNEL-MIB
CISCO-CIPCMPC-MIB
CISCO-CIPCSNA-MIB
CISCO-CIPTG-MIB
CISCO-SMI
CISCO-SNA-LLC-MIB
CISCO-TC
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
cipCmpcObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.72.1
cipCmpcSubChannel
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.72.1.1
cipCmpcSubChannelAdminTable
OBJECT-TYPE
This table contains configuration information used to define subchannels for the Cisco Multi-Path Channel (CMPC) feature on the CMCC card. Each instance of this table is created when a CMPC sub-channel is configured on the router. When the CMPC sub-channel configuration statement is deleted from the router, the instance represented by this table is removed.
1.3.6.1.4.1.9.9.72.1.1.1not-accessiblecurrent
cipCmpcSubChannelAdminEntry
OBJECT-TYPE
A list of CMPC configuration values.
1.3.6.1.4.1.9.9.72.1.1.1.1not-accessiblecurrent
cipCmpcSubChannelAdminPath
OBJECT-TYPE
Channel path for this CMPC instance.
1.3.6.1.4.1.9.9.72.1.1.1.1.1ChannelPathread-createcurrent
cipCmpcSubChannelAdminDevice
OBJECT-TYPE
Device address of the subchannel the attached host will use to communicate with this CMPC instance.
1.3.6.1.4.1.9.9.72.1.1.1.1.2ChannelDeviceread-createcurrent
cipCmpcSubChannelAdminTgName
OBJECT-TYPE
This is the name of the CMPC transmission group. Each CMPC subchannel in the same connection transmission group must have the same TG name
1.3.6.1.4.1.9.9.72.1.1.1.1.3ChannelTgNameread-createcurrent
cipCmpcSubChannelAdminDirection
OBJECT-TYPE
Specifies whether the CMPC subchannel is for host reads or host writes.
1.3.6.1.4.1.9.9.72.1.1.1.1.4INTEGER {read(1), write(2), readOrWrite(3)}read-createcurrent
cipCmpcSubChannelAdminTgTransport
OBJECT-TYPE
This object specifies the Transmission Group transport type OID for which this CMPC Sub-Channel instance if configured. When the Transmission Group for this CMPC Sub-Channel instance is not configured, this object will be set to the NULL TDomian { 0, 0 }.
1.3.6.1.4.1.9.9.72.1.1.1.1.5TDomainread-onlycurrent
cipCmpcSubChannelAdminRowStatus
OBJECT-TYPE
This object is used by a Management Station to create or delete the row entry in the cipCmpcSubChannelAdminTable following the the RowStatus textual convention. Upon successful creation of the row, an Agent automatically creates a corresponding entry in the cipCmpcSubChannelOperTable and cipCmpcSubChannelStatsTable. The Management Station can initiate row deletion, by setting this value to 'destroy (6)'. The Agent will then delete the rows corresponding to this CMPC instance from the cipCmpcSubChannelAdminTable, cipCmpcSubChannelOperTable and cipCmpcSubChannelStatsTable.
1.3.6.1.4.1.9.9.72.1.1.1.1.6RowStatusread-createcurrent
cipCmpcSubChannelOperTable
OBJECT-TYPE
This table contains operational information for the Cisco Multi-Path Channel (CMPC) feature on the CMCC card.
1.3.6.1.4.1.9.9.72.1.1.2not-accessiblecurrent
cipCmpcSubChannelOperEntry
OBJECT-TYPE
A list of CMPC operational and status values. The entries are created by the Agent. They have read-only access.
1.3.6.1.4.1.9.9.72.1.1.2.1not-accessiblecurrent
cipCmpcSubChannelOperState
OBJECT-TYPE
Activation state of the CMPC subchannel. shutdown - CMCC interface with this CMPC subchannel configured is shutdown. inactive - CMCC physical channel up, CMPC subchannel has not started to activate yet. xid2Pending - VTAM and CMCC CMPC have started negotiating channel connection. active - CMCC CMPC subchannel is active in MPC or non-HPDT mode. activePlus - CMCC CMPC subchannel is active in MPC+ or HPDT mode.
1.3.6.1.4.1.9.9.72.1.1.2.1.1INTEGER {shutdown(1), inactive(2), xid2Pending(3), active(4), activePlus(5)}read-onlycurrent
cipCmpcSubChannelOperMaxbfru
OBJECT-TYPE
Maximum number of 4096 byte buffers allowed per channel block I/O on this CMPC subchannel. For host write subchannels, this is the maximum number of 4096 byte buffers the host can write to the CMCC for each channel block I/O. Since the CMCC is capable of receiving 16 4096 byte buffers per channel block I/O, the value on host write subchannels will always be 16. For host read subchannels, this is the maximum number of 4096 byte buffers the host can read from the CMCC for each channel block I/O.
1.3.6.1.4.1.9.9.72.1.1.2.1.2Integer32read-onlycurrent
cipCmpcTg
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.72.1.2
cipCmpcTgOperTable
OBJECT-TYPE
This table contains Operational information for each instance of a CMPC Transmission Group (TG). Each instance of this table is created for every CMPC TG with a unique tg-name configured on a CMCC card.
1.3.6.1.4.1.9.9.72.1.2.1not-accessiblecurrent
cipCmpcTgOperEntry
OBJECT-TYPE
A list of CMPC TG Operational objects.
1.3.6.1.4.1.9.9.72.1.2.1.1not-accessiblecurrent
cipCmpcTgOperName
OBJECT-TYPE
This is the name for this instance of a CMPC transmission group (TG).
1.3.6.1.4.1.9.9.72.1.2.1.1.1ChannelTgNamenot-accessiblecurrent
cipCmpcTgOperLastSeqNumFailureCause
OBJECT-TYPE
The last CMPC TG sequence number failure cause. none - No sequence number errors have been detected. blockSeqError - Sequence number received in a cmpc I/O block did not match the expected sequence number. sweepSeqError - Sequence number received in a sweep message does not compare to the expected sequence number. for this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.1.1.2INTEGER {none(1), blockSeqError(2), sweepSeqError(3)}read-onlycurrent
cipCmpcTgOperLastSeqNumFailureTime
OBJECT-TYPE
This object describes the value of sysUpTime when this CMPC TG last detected a sequence number error. If the CMPC TG has not failed, then this value shall be zero.
1.3.6.1.4.1.9.9.72.1.2.1.1.3TimeStampread-onlycurrent
cipCmpcTgOperExpectedReceiveSeqNum
OBJECT-TYPE
This is the sequence number expected from the host by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.1.1.4Integer32read-onlycurrent
cipCmpcTgOperLastSeqNumReceived
OBJECT-TYPE
This is the last sequence number received from the host by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.1.1.5Integer32read-onlycurrent
cipCmpcTgOperLastSeqNumSent
OBJECT-TYPE
This is the last sequence number sent to the host by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.1.1.6Integer32read-onlycurrent
cipCmpcTgStatsTable
OBJECT-TYPE
This table contains statistical information for each instance of a CMPC Transmission Group (TG). Each instance of this table is created for every CMPC TG with a unique tg-name configured on a CMCC card.
1.3.6.1.4.1.9.9.72.1.2.2not-accessiblecurrent
cipCmpcTgStatsEntry
OBJECT-TYPE
A list of CMPC TG statistical objects.
1.3.6.1.4.1.9.9.72.1.2.2.1not-accessiblecurrent
cipCmpcTgStatsConnectReqs
OBJECT-TYPE
Number of connect requests received from the host by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.2.1.1Counter32read-onlycurrent
cipCmpcTgStatsConnectInds
OBJECT-TYPE
Number of connect indications sent to the host by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.2.1.2Counter32read-onlycurrent
cipCmpcTgStatsConnectRsps
OBJECT-TYPE
Number of connect responses received from the host by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.2.1.3Counter32read-onlycurrent
cipCmpcTgStatsConnectCnfms
OBJECT-TYPE
Number of connect confirms sent to the host by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.2.1.4Counter32read-onlycurrent
cipCmpcTgStatsDiscReqs
OBJECT-TYPE
Number of disconnect requests received from the host by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.2.1.5Counter32read-onlycurrent
cipCmpcTgStatsDiscInds
OBJECT-TYPE
Number of disconnect Indications sent to the host by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.2.1.6Counter32read-onlycurrent
cipCmpcTgStatsSweepReqsIn
OBJECT-TYPE
Number of sweep requests received from from the host by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.2.1.7Counter32read-onlycurrent
cipCmpcTgStatsSweepReqsOut
OBJECT-TYPE
Number of CMPC sweep requests sent by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.2.1.8Counter32read-onlycurrent
cipCmpcTgStatsSweepRspsIn
OBJECT-TYPE
Number of CMPC sweep responses received from VTAM by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.2.1.9Counter32read-onlycurrent
cipCmpcTgStatsSweepRspsOut
OBJECT-TYPE
Number of CMPC sweep responses sent by this CMPC TG.
1.3.6.1.4.1.9.9.72.1.2.2.1.10Counter32read-onlycurrent
cipCmpcTgStatsWraps
OBJECT-TYPE
Number of times the CMPC sequence number for this TG has wrapped.
1.3.6.1.4.1.9.9.72.1.2.2.1.11Counter32read-onlycurrent
cipCmpcNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.72.2
cipCmpcNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.72.2.0
ciscoCipCmpcMibConformance
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.72.3
ciscoCipCmpcMibCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.72.3.1
ciscoCipCmpcMibGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.72.3.2

Notifications

NameOIDStatus
cipCmpcDirectionMismatch
NOTIFICATION-TYPE
This trap indicates that the configured direction for the specified CMPC subchannel does not match the direction specified by the host. The CMPC subchannel will not activate as long as this mismatch exists.
1.3.6.1.4.1.9.9.72.2.0.1current
cipCmpcSeqNumError
NOTIFICATION-TYPE
This trap indicates that the CMPC TG has detected an MPC sequence number error. This error will cause the CMPC TG to disconnect.
1.3.6.1.4.1.9.9.72.2.0.2current

Conformance

NameOIDStatus
ciscoCipCmpcMibCompliance
MODULE-COMPLIANCE
The compliance statement for the Cisco Multi-Path Channel (CMPC) feature.
1.3.6.1.4.1.9.9.72.3.1.1current
ciscoCipCmpcSubChannelGroup
OBJECT-GROUP
A collection of objects providing Cisco Multi-Path Channel (CMPC) Administration, Operational status and Statistics.
1.3.6.1.4.1.9.9.72.3.2.1current
ciscoCipCmpcTgGroup
OBJECT-GROUP
A collection of objects providing CMPC TG Operational and Statistical information.
1.3.6.1.4.1.9.9.72.3.2.2current