CISCO-CAT6k-NAT-STAT-MIB
- Registered at
- 1.3.6.1.4.1.9.9.861
- Last updated
- 2019-06-11 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2019-06-11 00:00
- Namespace
- cisco
- Source file
CISCO-CAT6k-NAT-STAT-MIB- Digest
sha256:013cba2fd598f546bef4c689317bbd2f7ad2a16ed42ec62d0b63821f61720700
Description
The cisco catalyst 6000 Nat stat mib provides information about NAT platform specific statistics in the system
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-cat6000@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-CAT6k-NAT-STAT-MIB CISCO-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| NatBool TEXTUAL-CONVENTION Boolean type in this mib | current | |||
| NatType TEXTUAL-CONVENTION Type of NAT | current | |||
| NetFlowType TEXTUAL-CONVENTION Type of Netflow | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoCat6kNatStatMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.861.1 | |||
| ciscoCat6kNatStatus OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.861.1.2 | |||
| ciscoCat6kNatType OBJECT-TYPE NAT type can be Static, Dynamic, Mixed and other. Static should be displayed when static rules are hit. Dynamic should be displayed when dynamic rules are hit. If traffic hits rmap/pat rules, it should display as Other. | 1.3.6.1.4.1.9.9.861.1.2.1 | NatType | read-only | current |
| ciscoCat6kNatNetFlowType OBJECT-TYPE Netflow type will be Layer-3 or Mixed. If the rules are hit based only on Layer 3 information, it should display as Layer-3.For static/dynamic nat it is L3,rmap and Pat uses L4 info and it is considered as Mixed. | 1.3.6.1.4.1.9.9.861.1.2.2 | NetFlowType | read-only | current |
| ciscoCat6kNatFlowRecord OBJECT-TYPE This object shows whether ip nat create flow config is enabled or not. By default it will be in enabled state only. | 1.3.6.1.4.1.9.9.861.1.2.3 | NatBool | read-only | current |
| ciscoCat6kNatDynamicEntryUtilization OBJECT-TYPE This object gives total utilization of dynamic NAT entries present in the system. | 1.3.6.1.4.1.9.9.861.1.2.4 | OCTET STRING | read-only | current |
| ciscoCat6kNatStaticEntryUtilization OBJECT-TYPE This object gives total utilization of static NAT entries present in the system. | 1.3.6.1.4.1.9.9.861.1.2.5 | OCTET STRING | read-only | current |
| ciscoCat6kNatOtherEntryUtilization OBJECT-TYPE This object gives total utilization of other NAT (PAT,RMAP,Etc.) entries present in the system. | 1.3.6.1.4.1.9.9.861.1.2.6 | OCTET STRING | read-only | current |
| ciscoCat6kNatTotalEntryCount OBJECT-TYPE This object gives consolidated count of static as well as dynamic entries present in the system. | 1.3.6.1.4.1.9.9.861.1.2.7 | Counter32 | read-only | current |
| ciscoCat6kNatResourceUtilization OBJECT-TYPE Total system resource used by the system | 1.3.6.1.4.1.9.9.861.1.2.8 | OCTET STRING | read-only | current |
| ciscoCat6kNatStatMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.861.2 | |||
| ciscoCat6kNatStatMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.861.2.1 | |||
| ciscoCat6kNatStatMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.861.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoCat6kNatStatMIBComplianceVer1 MODULE-COMPLIANCE The compliance statement for CISCO-CAT6k-NAT-STAT-MIB | 1.3.6.1.4.1.9.9.861.2.1.1 | current |
| ciscoCat6kNatStatGroup OBJECT-GROUP A collection of objects providing status of NAT statistics | 1.3.6.1.4.1.9.9.861.2.2.1 | current |