CISCO-BULK-FILE-MIB
- Registered at
- 1.3.6.1.4.1.9.9.81
- Last updated
- 2002-06-10 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2002-06-10 00:00, 2002-05-15 00:00, 2001-08-22 00:00, 2001-08-01 00:00, 2001-06-26 17:00, 1998-10-29 17:00
- Namespace
- cisco
- Source file
CISCO-BULK-FILE-MIB- Digest
sha256:82243bebef148259ff90a40cab2990297b4f90e42b27949e254dad7860b4b9aa
Description
The MIB module for creating and deleting bulk files of SNMP data for file transfer.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, zeroDotZero |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-BULK-FILE-MIB CISCO-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoBulkFileMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.81.1 | |||
| cbfDefine OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.81.1.1 | |||
| cbfDefineMaxFiles OBJECT-TYPE The maximum number of file definitions this system can hold in cbfDefineFileTable. A value of 0 indicates no configured limit. This object may be read-only on some systems. Changing this number does not disturb existing entries. | 1.3.6.1.4.1.9.9.81.1.1.1 | Unsigned32 (0..4294967295) | read-write | current |
| cbfDefineFiles OBJECT-TYPE The current number of file definitions in cbfDefineFileTable. | 1.3.6.1.4.1.9.9.81.1.1.2 | Gauge32 | read-only | current |
| cbfDefineHighFiles OBJECT-TYPE The maximum value of cbfDefineFiles since system initialization. | 1.3.6.1.4.1.9.9.81.1.1.3 | Gauge32 | read-only | current |
| cbfDefineFilesRefused OBJECT-TYPE The number of attempts to create a file definition that failed due to exceeding cbfDefineMaxFiles. | 1.3.6.1.4.1.9.9.81.1.1.4 | Counter32 | read-only | current |
| cbfDefineMaxObjects OBJECT-TYPE The maximum total number of object selections to go with file definitions this system, that is, the total number of objects this system can hold in cbfDefineObjectTable. A value of 0 indicates no configured limit. This object may be read-only on some systems. Changing this number does not disturb existing entries. | 1.3.6.1.4.1.9.9.81.1.1.5 | Unsigned32 (0..4294967295) | read-write | current |
| cbfDefineObjects OBJECT-TYPE The current number of object selections in cbfDefineObjectTable. | 1.3.6.1.4.1.9.9.81.1.1.6 | Gauge32 | read-only | current |
| cbfDefineHighObjects OBJECT-TYPE The maximum value of cbfDefineObjects since system initialization. | 1.3.6.1.4.1.9.9.81.1.1.7 | Gauge32 | read-only | current |
| cbfDefineObjectsRefused OBJECT-TYPE The number of attempts to create an object selection that failed due to exceeding cbfDefineMaxObjects. | 1.3.6.1.4.1.9.9.81.1.1.8 | Counter32 | read-only | current |
| cbfDefineFileTable OBJECT-TYPE A table of bulk file definition and creation controls. | 1.3.6.1.4.1.9.9.81.1.1.9 | not-accessible | current | |
| cbfDefineFileEntry OBJECT-TYPE Information for creation of a bulk file. To creat a bulk file an application creates an entry in this table and corresponding entries in cbfDefineObjectTable. When the entry in this table and the corresponding entries in cbfDefineObjectTable are 'active' the appliction uses cbfDefineFileNow to create the file and a corresponding entry in cbfStatusFileTable. Deleting an entry in cbfDefineFileTable deletes all corresponding entries in cbfDefineObjectTable and cbfStatusFileTable. An entry may not be modified or deleted while its cbfDefineFileNow has the value 'running'. | 1.3.6.1.4.1.9.9.81.1.1.9.1 | not-accessible | current | |
| cbfDefineFileIndex OBJECT-TYPE An arbitrary integer to uniquely identify this entry. To create an entry a management application should pick a random number. | 1.3.6.1.4.1.9.9.81.1.1.9.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cbfDefineFileName OBJECT-TYPE The file name which is to be created. Explicit device or path choices in the value of this object override cbfDefineFileStorage. | 1.3.6.1.4.1.9.9.81.1.1.9.1.2 | DisplayString (SIZE(0..255)) | read-create | current |
| cbfDefineFileStorage OBJECT-TYPE The type of file storage to use: ephemeral data exists in small amounts until read volatile data exists in volatile memory permanent data survives reboot An ephemeral file is suitable to be read only one time. Note that this value is taken as advisory and may be overridden by explicit device or path choices in cbfDefineFile. A given system may support any or all of these. | 1.3.6.1.4.1.9.9.81.1.1.9.1.3 | INTEGER {ephemeral(1), volatile(2), permanent(3)} | read-create | current |
| cbfDefineFileFormat OBJECT-TYPE The format of the data in the file: StandardBER standard SNMP ASN.1 BER bulkBinary a binary format specified with this MIB bulkASCII a human-readable form of bulkBinary variantBERWithCksum ASN.1 BER encoding with checksum variantBinWithCksum a binary format with checksum A given system may support any or all of these. | 1.3.6.1.4.1.9.9.81.1.1.9.1.4 | INTEGER {standardBER(1), bulkBinary(2), bulkASCII(3), variantBERWithCksum(4), variantBinWithCksum(5)} | read-create | current |
| cbfDefineFileNow OBJECT-TYPE The control to cause file creation. The only values that can be set are 'create' and 'forcedCreate'. These can be set only when the value is 'ready'. Setting it to 'create' begins a file creation and creates a corresponding entry in cbfStatusFileTable. The system may choose to use an already existing copy of the file instead of creating a new one. This may happen if there has been no configuration change on the system and a request to recreate the file is received. Setting this object to 'forcedCreate' forces the system to create a new copy of the file. The value is 'notActve' as long as cbfDefineFileEntryStatus or any corresponding cbfDefineObjectEntryStatus is not active. When cbfDefineFileEntryStatus becomes active and all corresponding cbfDefineObjectEntryStatuses are active this object automatically goes to 'ready'. | 1.3.6.1.4.1.9.9.81.1.1.9.1.5 | INTEGER {notActive(1), ready(2), create(3), running(4), forcedCreate(5)} | read-create | current |
| cbfDefineFileEntryStatus OBJECT-TYPE The control that allows creation, modification, and deletion of entries. For detailed rules see the DESCRIPTION for cbfDefineFileEntry. | 1.3.6.1.4.1.9.9.81.1.1.9.1.6 | RowStatus | read-create | current |
| cbfDefineFileNotifyOnCompletion OBJECT-TYPE This controls the cbfDefineFileCompletion notification. If true, cbfDefineFileCompletion notification will be generated. It is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notification to be delivered. | 1.3.6.1.4.1.9.9.81.1.1.9.1.7 | TruthValue | read-create | current |
| cbfDefineObjectTable OBJECT-TYPE A table of objects to go in bulk files. | 1.3.6.1.4.1.9.9.81.1.1.10 | not-accessible | current | |
| cbfDefineObjectEntry OBJECT-TYPE Information about one object for a particular file. An application uses cbfDefineObjectEntryStatus to create entries in this table in correspondence with entries in cbfDefineFileTable, which must be created first. Entries in this table may not be changed, created or deleted while the corresponding value of cbfDefineFileNow is 'running'. | 1.3.6.1.4.1.9.9.81.1.1.10.1 | not-accessible | current | |
| cbfDefineObjectIndex OBJECT-TYPE An arbitrary integer to uniquely identify this entry. The numeric order of the entries controls the order of the objects in the file. | 1.3.6.1.4.1.9.9.81.1.1.10.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cbfDefineObjectClass OBJECT-TYPE The meaning of each object class is given below: object a single MIB object is retrieved. lexicalTable an entire table or partial table is retrieved in lexical order of rows. leastCpuTable an entire table is retrieved with lowest CPU utilization. Lexical ordering of rows may not be maintained and is dependent upon individual MIB implementation. | 1.3.6.1.4.1.9.9.81.1.1.10.1.2 | INTEGER {object(1), lexicalTable(2), leastCpuTable(3)} | read-create | current |
| cbfDefineObjectID OBJECT-TYPE The object identifier of a MIB object to be included in the file. If cbfDefineObjectClass is 'object' this must be a full OID, including all instance information. If cbfDefineObjectClass is 'lexicalTable' or 'leastCpuTable' this must be the OID of the table-defining SEQUENCE OF registration point. | 1.3.6.1.4.1.9.9.81.1.1.10.1.3 | OBJECT IDENTIFIER | read-create | current |
| cbfDefineObjectEntryStatus OBJECT-TYPE The control that allows creation, modification, and deletion of entries. For detailed rules see the DESCRIPTION for cbfDefineObjectEntry. | 1.3.6.1.4.1.9.9.81.1.1.10.1.4 | RowStatus | read-create | current |
| cbfDefineObjectTableInstance OBJECT-TYPE If cbfDefineObjectClass is 'lexicalTable', then this object represents the starting instance in the cbfDefineObjectID table. The file created will have entries starting from the lexicographically next instance of the OID represented by this object. For Eg: ------- Let us assume we are polling ifTable and we have information till the second row(ifIndex.2). Now we may be interested in 10 rows lexically following the second row. So, we set cbfDefineObjectTableInstance as ifIndex.2 and cbfDefineObjectNumEntries as 10. We will get information for the next 10 rows or if there are less than 10 populated rows, we will receive information till the end of the table is reached. The default value for this object is zeroDotZero. If this object has the value of zeroDotZero and cbfDefineObjectNumEntries has value 0, then the whole table(represented by cbfDefineObjectID) is retrieved. If this object has the value of zeroDotZero, cbfDefineObjectNumEntries has value n (>0) and there are m(>0) entries in the table(represented by cbfDefineObjectID) then the first n entries in the table are retrieved if n < m. If n >= m, then the whole table is retrieved. When the value of cbfDefineObjectNumEntries is 0, it means all the entries in the table(represented by cbfDefineObjectID) which lexicographically follow cbfDefineObjectTableInstance are retrieved. This object is irrelevent if cbfDefineObjectClass is not 'lexicalTable'. | 1.3.6.1.4.1.9.9.81.1.1.10.1.5 | OBJECT IDENTIFIER | read-create | current |
| cbfDefineObjectNumEntries OBJECT-TYPE If cbfDefineObjectClass is 'lexicalTable', then this object represents the maximum number of entries which will be populated in the file starting from the lexicographically next instance of the OID represented by cbfDefineObjectTableInstance. This object is irrelevent if cbfDefineObjectClass is not 'lexicalTable'. Refer to the description of cbfDefineObjectTableInstance for examples and different scenarios relating to this object. | 1.3.6.1.4.1.9.9.81.1.1.10.1.6 | Unsigned32 (0..4294967295) | read-create | current |
| cbfDefineObjectLastPolledInst OBJECT-TYPE This object represents the last polled instance in the table. The value represented by this object will be relevent only if the corresponding cbfStatusFileState is emptied(3) for ephemeral files or ready(2) for volatile or permanent files. A value of zeroDotZero indicates an absence of last polled object. An NMS can use the value of this object and populate the cbfDefineObjectTableInstance to retrieve a contiguous set of rows in a table. | 1.3.6.1.4.1.9.9.81.1.1.10.1.7 | OBJECT IDENTIFIER | read-only | current |
| cbfStatus OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.81.1.2 | |||
| cbfStatusMaxFiles OBJECT-TYPE The maximum number of file statuses this system can hold in cbfStatusFileTable. A value of 0 indicates no configured limit. This object may be read-only on some systems. Changing this number deletes the oldest finished entries until the new limit is satisfied. | 1.3.6.1.4.1.9.9.81.1.2.1 | Unsigned32 (0..4294967295) | read-write | current |
| cbfStatusFiles OBJECT-TYPE The current number of file statuses in cbfStatusFileTable. | 1.3.6.1.4.1.9.9.81.1.2.2 | Gauge32 | read-only | current |
| cbfStatusHighFiles OBJECT-TYPE The maximum value of cbfStatusFiles since system initialization. | 1.3.6.1.4.1.9.9.81.1.2.3 | Gauge32 | read-only | current |
| cbfStatusFilesBumped OBJECT-TYPE The number times the oldest entry was deleted due to exceeding cbfStatusMaxFiles. | 1.3.6.1.4.1.9.9.81.1.2.4 | Counter32 | read-only | current |
| cbfStatusFileTable OBJECT-TYPE A table of bulk file status. | 1.3.6.1.4.1.9.9.81.1.2.5 | not-accessible | current | |
| cbfStatusFileEntry OBJECT-TYPE Status for a particular file. An entry exists in this table for each time cbfDefineFileNow has been set to 'create' and the corresponding entry here has not been explicitly deleted by the application or bumped to make room for a new entry. Deleting an entry with cbfStatusFileState 'running' aborts the file creation attempt. It is implementation and file-system specific whether deleting the entry also deletes the file. | 1.3.6.1.4.1.9.9.81.1.2.5.1 | not-accessible | current | |
| cbfStatusFileIndex OBJECT-TYPE An arbitrary integer to uniquely identify this file. The numeric order of the entries implies the creation order of the files. | 1.3.6.1.4.1.9.9.81.1.2.5.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| cbfStatusFileState OBJECT-TYPE The file state: running data is being written to the file ready the file is ready to be read emptied an ephemeral file was successfully consumed noSpace no data due to insufficient file space badName no data due to a name or path problem writeErr no data due to fatal file write error noMem no data due to insufficient dynamic memory buffErr implementation buffer too small aborted short terminated by operator command Only the 'ready' state implies that the file is available for transfer. The disposition of files after an error is implementation and file-syste specific. | 1.3.6.1.4.1.9.9.81.1.2.5.1.2 | INTEGER {running(1), ready(2), emptied(3), noSpace(4), badName(5), writeErr(6), noMem(7), buffErr(8), aborted(9)} | read-only | current |
| cbfStatusFileCompletionTime OBJECT-TYPE The value of sysUpTime when the creation attempt completed. A value of 0 indicates not complete. For ephemeral files this is the time when cbfStatusFileState goes to 'emptied'. For others this is the time when the state leaves 'running'. | 1.3.6.1.4.1.9.9.81.1.2.5.1.3 | TimeStamp | read-only | current |
| cbfStatusFileEntryStatus OBJECT-TYPE The control that allows deletion of entries. For detailed rules see the DESCRIPTION for cbfStatusFileEntry. This object may not be set to any value other than 'destroy'. | 1.3.6.1.4.1.9.9.81.1.2.5.1.4 | RowStatus | read-write | current |
| ciscoBulkFileMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.81.2 | |||
| ciscoBulkFileMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.81.2.0 | |||
| ciscoBulkFileMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.81.3 | |||
| ciscoBulkFileMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.81.3.1 | |||
| ciscoBulkFileMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.81.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| cbfDefineFileCompletion NOTIFICATION-TYPE A cbfDefineFileCompletion notification is sent on the following conditions : - completion of a file consumption operation in case of ephemeral files. - completion of file creation operation in case of volatile or permanent files. - any error during file creation. | 1.3.6.1.4.1.9.9.81.2.0.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoBulkFileMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco Bulk File MIB. Implementation of this MIB is based on individual product needs. | 1.3.6.1.4.1.9.9.81.3.1.1 | deprecated |
| ciscoBulkFileMIBComplianceRev1 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco Bulk File MIB. Implementation of this MIB is based on individual product needs. | 1.3.6.1.4.1.9.9.81.3.1.2 | current |
| ciscoBulkFileDefineGroup OBJECT-GROUP Bulk file definition management. | 1.3.6.1.4.1.9.9.81.3.2.1 | deprecated |
| ciscoBulkFileStatusGroup OBJECT-GROUP Bulk file status management. | 1.3.6.1.4.1.9.9.81.3.2.2 | current |
| ciscoBulkFileNotiGroup NOTIFICATION-GROUP A collection of notification objects for supporting Bulk file notification management. | 1.3.6.1.4.1.9.9.81.3.2.3 | current |
| ciscoBulkFileDefineGroupRev1 OBJECT-GROUP Bulk file definition management. | 1.3.6.1.4.1.9.9.81.3.2.4 | current |