CISCO-ATM-TRAFFIC-MIB
- Registered at
- 1.3.6.1.4.1.9.10.11
- Last updated
- 2002-08-26 00:00
- Organization
- Cisco System Inc.
- Revisions
- 2002-08-26 00:00, 2001-11-01 00:00, 1997-05-29 00:00
- Namespace
- cisco
- Source file
CISCO-ATM-TRAFFIC-MIB- Digest
sha256:31a847976e36e333481b3893cafb4240f21c30dcdfd1eab7ae9269ecb94cf18f
Description
This MIB module is an extension to traffic OIDs and variables defined in rfc1695.
Contact
Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-atm@cisco.com
Imports
| From | Symbols |
|---|---|
| ATM-MIB | atmTrafficDescrParamEntry |
| CISCO-SMI | ciscoExperiment |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-MIB ATM-TC-MIB CISCO-ATM-TRAFFIC-MIB CISCO-SMI IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoAtmTrafficExtMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.11.1 | |||
| ciscoAtmTrafficTypeExt OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.11.1.1 | |||
| atmNoClpNoScrCdvt OBJECT-IDENTITY Specifies peak cell rate for CLP, and cell delay variation tolerance: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CDVT in cell-times Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor is for cbr, abr or ubr service categories, desiring to specify the cdvt as well as pcr. | 1.3.6.1.4.1.9.10.11.1.1.1 | deprecated | ||
| atmClpScrMbsCdvt OBJECT-IDENTITY This traffic descriptor is for Peak Cell Rate (PCR), Sustained Cell Rate (SCR), Maximum Burst Size applied to SCR, and Cell Delay Variation Tolerance applied to PCR. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0 sustained cell rate in cells per second. Parameter 3: maximum burst size in cells Parameter 4: CDVT in cell-times Parameter 5: not used. | 1.3.6.1.4.1.9.10.11.1.1.2 | current | ||
| atmNoClpScrMbsCdvt OBJECT-IDENTITY This traffic descriptor is for Peak Cell Rate (PCR), Sustained Cell Rate (SCR), Maximum Burst Size applied to SCR, and Cell Delay Variation Tolerance applied to PCR. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0+1 sustained cell rate in cells per second. Parameter 3: maximum burst size in cells Parameter 4: CDVT in cell-times Parameter 5: not used. | 1.3.6.1.4.1.9.10.11.1.1.3 | current | ||
| atmNoClpMcr OBJECT-IDENTITY This traffic descriptor is for Peak Cell Rate (PCR) and Minimum Cell Rate (MCR). The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0+1 minimum cell rate in cells per second. Parameter 3: not used. Parameter 4: not used. Parameter 5: not used. | 1.3.6.1.4.1.9.10.11.1.1.4 | current | ||
| atmNoClpMcrCdvt OBJECT-IDENTITY This traffic descriptor is for Peak Cell Rate (PCR), Minimum Cell Rate (MCR), and Cell Delay Variation Tolerance applied to PCR. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CDVT in cell-times Parameter 3: CLP=0+1 minimum cell rate in cells per second. Parameter 4: not used. Parameter 5: not used. | 1.3.6.1.4.1.9.10.11.1.1.5 | current | ||
| ciscoAtmTrafficTableExt OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.11.1.2 | |||
| atmTrafficDescrParamExtTable OBJECT-TYPE Provide additional information specifying traffic parameters for a VC/VP. | 1.3.6.1.4.1.9.10.11.1.2.1 | not-accessible | current | |
| atmTrafficDescrParamExtEntry OBJECT-TYPE An entry in the Traffic Parameter Descriptor extension table. | 1.3.6.1.4.1.9.10.11.1.2.1.1 | not-accessible | current | |
| atmTrafficExplicitServCategory OBJECT-TYPE This objects indicates the Service Category specified by the Traffic Descriptor. If it is defined, the setting of this object determines the Service Category used for the connection. This then limits the possible Traffic Descriptor Types as follows: Explicit Service Category Type may only be ----------------------------------------- cbr atmNoClpNoScr. atmClpNoTaggingNoScr atmClpTaggingNoScr atmNoClpNoScrCdvt abr/ubr atmNoTrafficDescriptor atmNoClpNoScr. atmNoClpNoScrCdvt atmNoClpMcr -- ubr+/abr atmNoClpMcrCdvt -- ubr+/abr vbr atmNoClpScr atmClpNoTaggingScr atmClpTaggingScr atmClpScrMbsCdvt atmNoClpScrMbsCdvt ----------------------------------------- If the settings of Service Category and Traffic Descriptor Type are not compatible, the row can not be made active. | 1.3.6.1.4.1.9.10.11.1.2.1.1.1 | INTEGER {cbr(1), vbrRt(2), vbrNrt(3), abr(4), ubr(5), notDef(6)} | read-create | current |
| atmTrafficDerivedServCategory OBJECT-TYPE This object indicates the Service Category derived from the Traffic Descriptor. If the object atmTrafficExplicitServCategory has a defined value, then this object mirrors that value. If Explicit Service Category has the value notDef, then this object reflects the Service Category derived from the Traffic Descriptor Type as follows: Traffic Descriptor Service Type Category ----------------------------------------- atmNoTrafficDescriptor ubr atmNoClpMcr abr atmNoClpMcrCdvt abr atmNoClpNoScr --| atmClpNoTaggingNoScr |-- cbr atmClpTaggingNoScr | atmNoClpNoScrCdvt --| atmNoClpScr --| atmClpNoTaggingScr |-- vbr-rt atmClpScrMbsCdvt | atmNoClpScrMbsCdvt | atmClpTaggingScr --| ----------------------------------------- | 1.3.6.1.4.1.9.10.11.1.2.1.1.2 | INTEGER {cbr(1), vbrRt(2), vbrNrt(3), abr(4), ubr(5)} | read-only | current |
| atmTrafficDescriptorName OBJECT-TYPE A human readable string that contains the unique name of this Traffic Descriptor. This object will return a zero-length string if value is not set. | 1.3.6.1.4.1.9.10.11.1.2.1.1.3 | SnmpAdminString | read-create | current |
| ciscoAtmTrafficExtMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.11.3 | |||
| ciscoAtmTrafficExtMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.11.3.1 | |||
| ciscoAtmTrafficExtMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.11.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoAtmTrafficExtMIBCompliance MODULE-COMPLIANCE The compliance statement for the Cisco ATM Traffic Extension MIB. | 1.3.6.1.4.1.9.10.11.3.1.1 | deprecated |
| ciscoAtmTrafficExtMIBComplianceRev1 MODULE-COMPLIANCE The compliance statement for the Cisco ATM Traffic Extension MIB. | 1.3.6.1.4.1.9.10.11.3.1.2 | current |
| ciscoAtmTrafficTableExtMIBGroup OBJECT-GROUP A collection of objects which provide extensions to the ATM Traffic Parameter Descriptor Table. | 1.3.6.1.4.1.9.10.11.3.2.1 | current |
| ciscoAtmTrafficNmsGroup OBJECT-GROUP A collection of objects which provide additional information for a management system. | 1.3.6.1.4.1.9.10.11.3.2.2 | current |