CISCO-ATM-SWITCH-FR-IWF-MIB
- Registered at
- 1.3.6.1.4.1.9.9.112
- Last updated
- 2001-05-20 00:00
- Organization
- Cisco Systems
- Revisions
- 2001-05-20 00:00, 2000-02-29 00:00, 1998-07-09 00:00
- Namespace
- cisco
- Source file
CISCO-ATM-SWITCH-FR-IWF-MIB- Digest
sha256:98398b3b8c8b59cabad01d012c9bcecd478889159bd79bf904f2dcef7755d3ae
Description
A MIB module for managing Frame Relay to ATM interworking connections, and Frame Relay to Frame Relay switched connections via an ATM switching fabric, on a Cisco ATM switch.
Contact
Cisco Systems, Inc. 170 West Tasman Drive, San Jose CA 95134-1706. Phone: +1 408 526 5260 Email: cs-atm@cisco.com
Imports
| From | Symbols |
|---|---|
| ATM-MIB | AtmTrafficDescrParamIndex |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | Unsigned32 |
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-MIB ATM-TC-MIB CISCO-ATM-SWITCH-FR-IWF-MIB CISCO-SMI CISCO-TC IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AtmAddr TEXTUAL-CONVENTION An ATM address. The semantics are implied by the length. The address types are: - no address (0 octets) - E.164 (8 octets) - NSAP (20 octets) In addition, when subaddresses are used the AtmAddr may represent the concatenation of address and subaddress. The associated address types are: - E.164, E.164 (16 octets) - E.164, NSAP (28 octets) - NSAP, NSAP (40 octets) Address lengths other than defined in this definition imply address types defined elsewhere. Note: The E.164 address is encoded in BCD format. | current | |||
| CasfTrafficDescrRow TEXTUAL-CONVENTION Identifies an index into the casfTrafficDescrTable. The value 0 signifies that no row has been identified. | current | |||
| ConnectionKind TEXTUAL-CONVENTION The kind of connection, distinguished by the use of call control. | current | |||
| DlciValue TEXTUAL-CONVENTION A numerical value identifying a Data Link Connection Identifier (DLCI) for a Frame Relay connection. The valid range of values depends on the format of the address field used, as described in ITU Recommendation Q.922. When a 2-octet address field is used, the value ranges from 0 to 1023. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoAtmSwitchFrIwfMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.112.1 | |||
| casfFrTraffic OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.112.1.1 | |||
| casfTrafficDescrTable OBJECT-TYPE This table contains a set of self-consistent Frame Relay traffic parameters. It is intended to be used to create Frame Relay to ATM interworking connections, hence a ATM traffic service category is also included. An entry in this table is associated with an equivalent entry in the ATM traffic descriptor table (atmTrafficDescrParamTable); the mapping is given by the object casfTrafficDescrAtmIndex. The agent will not permit deletion of the associated atmTrafficDescrEntry while the Frame Relay Traffic Descriptor entry exists. When creating an entry in this table, if the value of casfTrafficDescrAtmIndex is specified, the following cases are possible: (a) if no corresponding row exists in atmTrafficDescrParamTable, the agent will create such a row with the given index value. (b) if a corresponding row does exist in atmTrafficDescrParamTable, the agent compares the parameter values in casfTrafficDescrEntry and the corresponding atmTrafficDescrParamEntry. If the two entries are not equivalent, an error is returned, and row creation fails. When creating an entry in this table, if the value of casfTrafficDescrAtmIndex is not specified, the agent will assign a value to this object so that it refers to an equivalent entry in the atmTrafficDescrParamTable. If such an equivalent entry does not already exist, the agent will create one. The agent creates rows in this table for use with signaled connections. These are called 'transient' rows - they disappear when the connection is torn down, and are not saved in non-volatile memory. By convention, transient rows usually use high-numbered index values. Entries can be deleted by setting the row status to destroy(6). The agent denies the request if the row is in use by existing connections. | 1.3.6.1.4.1.9.9.112.1.1.1 | not-accessible | current | |
| casfTrafficDescrEntry OBJECT-TYPE Describes a traffic descriptor that is used by Frame Relay connections. | 1.3.6.1.4.1.9.9.112.1.1.1.1 | not-accessible | current | |
| casfTrafficDescrIndex OBJECT-TYPE Uniquely identifies a row in this table. | 1.3.6.1.4.1.9.9.112.1.1.1.1.1 | CasfTrafficDescrRow | not-accessible | current |
| casfTrafficDescrCIR OBJECT-TYPE The value of the Committed Information Rate (CIR) parameter. | 1.3.6.1.4.1.9.9.112.1.1.1.1.2 | Unsigned32 | read-create | current |
| casfTrafficDescrBc OBJECT-TYPE The value of the Committed Burst Size (Bc) parameter. | 1.3.6.1.4.1.9.9.112.1.1.1.1.3 | Unsigned32 | read-create | current |
| casfTrafficDescrBe OBJECT-TYPE The value of the Excess Burst Size (Be) parameter. | 1.3.6.1.4.1.9.9.112.1.1.1.1.4 | Unsigned32 | read-create | current |
| casfTrafficDescrPIR OBJECT-TYPE The value of the Peak Information Rate (PIR) parameter. | 1.3.6.1.4.1.9.9.112.1.1.1.1.5 | Unsigned32 | read-create | current |
| casfTrafficDescrServCategory OBJECT-TYPE The service category, as defined for ATM. | 1.3.6.1.4.1.9.9.112.1.1.1.1.6 | INTEGER {vbrNrt(1), abr(2), ubr(3), vbrRt(4)} | read-create | current |
| casfTrafficDescrAtmIndex OBJECT-TYPE The index of the equivalent entry in the atmTrafficDescrParamTable. | 1.3.6.1.4.1.9.9.112.1.1.1.1.7 | AtmTrafficDescrParamIndex | read-create | current |
| casfTrafficDescrRowStatus OBJECT-TYPE Used to create, delete and modify this row. None of the columnar values (other than this one) can be modified while the row is active. | 1.3.6.1.4.1.9.9.112.1.1.1.1.8 | RowStatus | read-create | current |
| casfFrVC OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.112.1.2 | |||
| casfVcEndptTable OBJECT-TYPE This table contains information about Frame Relay end-points of FR-ATM interworking connections on the switch. When an entry is created in this table, the agent creates a corresponding entry in the atmVclTable of ATM-MIB, to represent the configuration on the internal ATM port. The mapping between an entry in this table, and the corresponding entry in the atmVclTable is shown in the casfFAMapTable and the casfAFMapTable. Entries can be created or deleted in this table by an NMS using the casfVcEndptRowStatus object. To create a PVC connection end-point, the value of casfVcEndptConnKind must be 'pvc'. To create a soft VC initiator end-point, set the value of casfVcEndptConnKind to 'spvcInitiator', and specify the value of casfVcEndptSpvcRemoteAddr and casfVcEndptSpvcRemoteType. If the value of casfVcEndptSpvcRemoteType is 'frameRelay', you must also specify the value of casfVcEndptSpvcRemoteDlci. Activating the conceptual row will then cause the agent to attempt to establish a connection to the remote frame relay interface. If the value of casfVcEndptSpvcRemoteType is 'atm', you must specify the values of casfVcEndptSpvcRemoteVpi and casfVcEndptSpvcRemoteVci. Activating the conceptual row will then cause the agent to attempt to establish a connection to the remote ATM interface. The agent creates an entry in this table when an incoming signaling request causes a soft VC connection to be established with a local frame relay interface as the destination. The value of casfVcEndptConnKind in this case will be 'spvcTarget'. Such entries cannot be modified or deleted by network management. They will be deleted when the connection is removed by signaling. | 1.3.6.1.4.1.9.9.112.1.2.1 | not-accessible | current | |
| casfVcEndptEntry OBJECT-TYPE Models a bidirectional Frame Relay VC end-point. The ifIndex identifies an ifTable entry for a Frame Relay interface on this device. | 1.3.6.1.4.1.9.9.112.1.2.1.1 | not-accessible | current | |
| casfVcEndptDlci OBJECT-TYPE The value of the Data Link Connection Identifier (DLCI) which identifies this connection end-point. | 1.3.6.1.4.1.9.9.112.1.2.1.1.1 | DlciValue | not-accessible | current |
| casfVcEndptRxTrafficDescrRow OBJECT-TYPE Identifies the entry in the casfTrafficDescrTable which applies to the receive direction at this connection end-point. For connections that negotiate traffic parameters through signaling (e.g. ABR connections), this object points to the desired traffic parameters, while the object casfVcEndptRxNegTrafficDescrRow points to the negotiated traffic parameters, for the receive direction. | 1.3.6.1.4.1.9.9.112.1.2.1.1.2 | CasfTrafficDescrRow | read-create | current |
| casfVcEndptTxTrafficDescrRow OBJECT-TYPE Identifies the entry in the casfTrafficDescrTable which applies to the transmit direction at this connection end-point. For connections that negotiate traffic parameters through signaling (e.g. ABR connections), this object points to the desired traffic parameters, while the object casfVcEndptTxNegTrafficDescrRow points to the negotiated traffic parameter, for the transmit direction. | 1.3.6.1.4.1.9.9.112.1.2.1.1.3 | CasfTrafficDescrRow | read-create | current |
| casfVcEndptRxNegTrafficDescrRow OBJECT-TYPE Identifies the entry in the casfTrafficDescrTable which contains negotiated traffic parameters applied to the receive direction of this connection end-point. This object is not instantiated if this is not the calling side of a soft VC, or if there is no traffic negotiation. | 1.3.6.1.4.1.9.9.112.1.2.1.1.4 | CasfTrafficDescrRow | read-only | current |
| casfVcEndptTxNegTrafficDescrRow OBJECT-TYPE Identifies the entry in the casfTrafficDescrTable which contains negotiated traffic parameters applied to the transmit direction of this connection endpoint. This object is not instantiated if this is not the calling side of a soft VC, or if there is no traffic negotiation. | 1.3.6.1.4.1.9.9.112.1.2.1.1.5 | CasfTrafficDescrRow | read-only | current |
| casfVcEndptConnKind OBJECT-TYPE The connection kind. The value can be set prior to the row becoming 'active'. To create a pvc connection endpoint, set this value to pvc(1). To create a soft VC connection endpoint, set this value to spvcInitiator(4), and specify the value of casfVcEndptSpvcRemoteAddr. The values svcIncoming(2), svcOutgoing(3), and spvcTarget(5) can not be written. | 1.3.6.1.4.1.9.9.112.1.2.1.1.6 | ConnectionKind | read-create | current |
| casfVcEndptIwfType OBJECT-TYPE The type of the interworking function. The value can be set prior to the row becoming 'active'. | 1.3.6.1.4.1.9.9.112.1.2.1.1.7 | INTEGER {network(1), serviceTransparent(2), serviceTranslation(3), rfc1973(4)} | read-create | current |
| casfVcEndptClpMode OBJECT-TYPE Specifies how to map from Discard Eligibility (DE) bit on the Frame Relay side to Congestion Loss Priority (CLP) bit on the ATM side. For network interworking, clpIfDe(1) corresponds to Mode 1 as defined in FRF.5, section 4.4.1. clpIsZero(2) and clpIsOne(3) correspond to Mode 2 as defined in FRF.5, section 4.4.1. For service interworking, clpIfDe(1) corresponds to Mode 1 as defined in FRF.8, section 4.2.1. clpIsZero(2) and clpIsOne(3) correspond to Mode 2 as defined in FRF.8, section 4.2.1. | 1.3.6.1.4.1.9.9.112.1.2.1.1.8 | INTEGER {clpIfDe(1), clpIsZero(2), clpIsOne(3)} | read-create | current |
| casfVcEndptDeMode OBJECT-TYPE Specifies how to map from Congestion Loss Priority (CLP) bit on the ATM side to Discard Eligibility (DE) bit on the Frame Relay side. See the Frame Relay Forum specifications FRF.5 and FRF.8 for definitions of Mode 1 and Mode 2. For network interworking, the valid values are: deIfClpOrFrsscsDe(1) -- Mode 1 of FRF.5 section 4.4.2 deIfFrsscsDe(2) -- Mode 2 of FRF.5 section 4.4.2 For service interworking, the valid values are: deIfClp(3) -- Mode 1 of FRF.8 section 4.2.2 deIsZero(4) and deIsOne(5) -- Mode 2 of FRF.8 section 4.2.2 | 1.3.6.1.4.1.9.9.112.1.2.1.1.9 | INTEGER {deIfClpOrFrsscsDe(1), deIfFrsscsDe(2), deIfClp(3), deIsZero(4), deIsOne(5)} | read-create | current |
| casfVcEndptEfciMode OBJECT-TYPE Specifies how to map from FECN field in the Frame Relay PDU to the EFCI field in ATM cells, in case of service interworking. This object does not apply to network interworking. efciIfFecn(1) and efciIsZero(2) correspond to Mode 1 and Mode 2 (as defined in FRF.8, section 4.3.1.1), respectively. | 1.3.6.1.4.1.9.9.112.1.2.1.1.10 | INTEGER {efciIfFecn(1), efciIsZero(2)} | read-create | current |
| casfVcEndptUpcMode OBJECT-TYPE Specifies the action taken by Usage Parameter Control (UPC) at the ingress port. | 1.3.6.1.4.1.9.9.112.1.2.1.1.11 | INTEGER {pass(1), tagDrop(2), tag(3), drop(4)} | read-create | current |
| casfVcEndptSpvcRemoteAddr OBJECT-TYPE The ATM address of the remote end of the soft VC. The value can be set prior to the row becoming 'active', and if the value of casfVcEndptConnKind is spvcInitiator(4). The agent will return an inconsistentValue error on sets if the value of casfVcEndptConnKind is other than spvcInitiator(4). If the value of casfVcEndptConnKind spvcTarget(5), this object is initialized by the agent. This object is instantiated only if the value of casfVcEndptConnKind is spvcInitiator(4) or spvcTarget(5). | 1.3.6.1.4.1.9.9.112.1.2.1.1.12 | AtmAddr | read-create | current |
| casfVcEndptSpvcRemoteType OBJECT-TYPE The type of the remote end of the soft VC. This object is instantiated only if the value of casfVcEndptConnKind is spvcInitiator(4) or spvcTarget(5). The agent will return an inconsistentValue error on sets if the value of casfVcEndptConnKind is other than spvcInitiator(4) or spvcTarget(5). | 1.3.6.1.4.1.9.9.112.1.2.1.1.13 | INTEGER {other(1), frameRelay(2), atm(3)} | read-create | current |
| casfVcEndptSpvcRemoteDlci OBJECT-TYPE The DLCI value to be used at the remote end of the soft VC. The value can be set prior to the row becoming 'active', and if the value of casfVcEndptConnKind is spvcInitiator(4), and the value of casfVcEndptSpvcRemoteType is frameRelay(2). The object is instantiated only if the value of casfVcEndptSpvcRemoteType is frameRelay(2). The agent will return an inconsistentValue error on sets if the value of casfVcEndptSpvcRemoteType is other than frameRelay(2). | 1.3.6.1.4.1.9.9.112.1.2.1.1.14 | DlciValue | read-create | current |
| casfVcEndptSpvcRemoteVpi OBJECT-TYPE The VPI value to be used at the remote end of the soft VC. The value can be set prior to the row becoming 'active', and if the value of casfVcEndptConnKind is spvcInitiator(4), and the value of casfVcEndptSpvcRemoteType is atm(3). The object is instantiated only if the value of casfVcEndptSpvcRemoteType is atm(3). The agent will return an inconsistentValue error on sets if the value of casfVcEndptSpvcRemoteType is other than atm(3). | 1.3.6.1.4.1.9.9.112.1.2.1.1.15 | INTEGER (0..255) | read-create | current |
| casfVcEndptSpvcRemoteVci OBJECT-TYPE The VCI value to be used at the remote end of the soft VC. The value can be set prior to the row becoming 'active', and if the value of casfVcEndptConnKind is spvcInitiator(4), and the value of casfVcEndptSpvcRemoteType is atm(3). The object is instantiated only if the value of casfVcEndptSpvcRemoteType is atm(3). The agent will return an inconsistentValue error on sets if the value of casfVcEndptSpvcRemoteType is other than atm(3). | 1.3.6.1.4.1.9.9.112.1.2.1.1.16 | INTEGER (0..65535) | read-create | current |
| casfVcEndptCreationTime OBJECT-TYPE The time when this row was created. | 1.3.6.1.4.1.9.9.112.1.2.1.1.17 | TimeStamp | read-only | current |
| casfVcEndptRcvdSigStatus OBJECT-TYPE The value of this object identifies the PVC status received via the local in-channel signaling procedures for this PVC end-point. This object is only pertinent for interfaces that perform the bidirectional procedures. For user-to-network network side procedures, the value of this object should be none(4). | 1.3.6.1.4.1.9.9.112.1.2.1.1.18 | INTEGER {deleted(1), active(2), inactive(3), none(4)} | read-only | current |
| casfVcEndptRowStatus OBJECT-TYPE Used to create, modify or delete this row. | 1.3.6.1.4.1.9.9.112.1.2.1.1.19 | RowStatus | read-create | current |
| casfVcSignalStandardCalledIe OBJECT-TYPE Specifies whether or not to signal the standard (from the ATM-Forum PNNI Soft PVC Addendum) format of the Called Soft PVC IE, as opposed to the proprietary encoding we have used for the network-interworking case to a frame-relay destination. | 1.3.6.1.4.1.9.9.112.1.2.1.1.20 | TruthValue | read-create | current |
| casfFrInterface OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.112.1.3 | |||
| casfFrLmiTable OBJECT-TYPE This table contains frame relay Local Management Interface (LMI) parameters and counters. There is one entry for each frame relay interface. Entries come and go in this table as frame relay interfaces are created and deleted in the device. | 1.3.6.1.4.1.9.9.112.1.3.1 | not-accessible | current | |
| casfFrLmiEntry OBJECT-TYPE Frame relay LMI objects for a particular frame relay interface, which is identified by the ifIndex value in the INDEX clause. | 1.3.6.1.4.1.9.9.112.1.3.1.1 | not-accessible | current | |
| casfFrLmiProtocol OBJECT-TYPE Identifies the Local In-Channel Signaling Protocol that is used for this frame relay port. | 1.3.6.1.4.1.9.9.112.1.3.1.1.1 | INTEGER {none(1), lmi(2), ansiT1617D(3), ansiT1617B(4), ccittQ933A(5)} | read-write | current |
| casfFrLmiType OBJECT-TYPE Identifies the Local In-Channel Signaling Procedure that is used for this frame relay port. A dte performs only user-side procedures. A dce performs only network-side procedures. An nni performs bidirectional procedures. | 1.3.6.1.4.1.9.9.112.1.3.1.1.2 | INTEGER {dte(1), dce(2), nni(3)} | read-write | current |
| casfFrLmiUserN391 OBJECT-TYPE Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage. | 1.3.6.1.4.1.9.9.112.1.3.1.1.3 | INTEGER (1..255) | read-write | current |
| casfFrLmiUserN392 OBJECT-TYPE The maximum number of unanswered Status Enquiries the device shall accept before declaring the interface down. | 1.3.6.1.4.1.9.9.112.1.3.1.1.4 | INTEGER (1..10) | read-write | current |
| casfFrLmiUserN393 OBJECT-TYPE The number of status polling intervals over which the error threshold is counted. For example, if within N393 number of events the device receives N392 number of errors, the interface is marked as down. | 1.3.6.1.4.1.9.9.112.1.3.1.1.5 | INTEGER (1..10) | read-write | current |
| casfFrLmiUserT391 OBJECT-TYPE The number of seconds between successive status enquiry messages. | 1.3.6.1.4.1.9.9.112.1.3.1.1.6 | INTEGER (5..30) | read-write | current |
| casfFrLmiNetN392 OBJECT-TYPE The value of the network-side error threshold for this frame relay port. | 1.3.6.1.4.1.9.9.112.1.3.1.1.7 | INTEGER (1..10) | read-write | current |
| casfFrLmiNetN393 OBJECT-TYPE The value of the network-side monitored events count for this frame relay port. If, within N393 number of events, the network-side receives N392 number of errors, the interface is marked as down. | 1.3.6.1.4.1.9.9.112.1.3.1.1.8 | INTEGER (0..10) | read-write | current |
| casfFrLmiNetT392 OBJECT-TYPE The value of the network-side polling verification timer for this frame relay port. | 1.3.6.1.4.1.9.9.112.1.3.1.1.9 | INTEGER (5..30) | read-write | current |
| casfFrLmiEnquiryIns OBJECT-TYPE Number of Status Enquiry messages received. | 1.3.6.1.4.1.9.9.112.1.3.1.1.10 | Counter32 | read-only | current |
| casfFrLmiEnquiryOuts OBJECT-TYPE Number of Status Enquiry messages sent. | 1.3.6.1.4.1.9.9.112.1.3.1.1.11 | Counter32 | read-only | current |
| casfFrLmiStatusIns OBJECT-TYPE Number of Status messages received. | 1.3.6.1.4.1.9.9.112.1.3.1.1.12 | Counter32 | read-only | current |
| casfFrLmiStatusOuts OBJECT-TYPE Number of Status messages sent. | 1.3.6.1.4.1.9.9.112.1.3.1.1.13 | Counter32 | read-only | current |
| casfFrLmiStatusTimeouts OBJECT-TYPE Number of times when timeout occurred on waiting for Status message | 1.3.6.1.4.1.9.9.112.1.3.1.1.14 | Counter32 | read-only | current |
| casfFrLmiStatusEnqTimeouts OBJECT-TYPE Number of times when timeout occurred on waiting for Status Enquiry message | 1.3.6.1.4.1.9.9.112.1.3.1.1.15 | Counter32 | read-only | current |
| casfConfIfTable OBJECT-TYPE Contains an entry for each Frame Relay interface that supports FR-ATM interworking connections. An entry contains interworking related parameters for the interface. | 1.3.6.1.4.1.9.9.112.1.3.2 | not-accessible | current | |
| casfConfIfEntry OBJECT-TYPE Configuration parameters for interworking at a Frame Relay interface. | 1.3.6.1.4.1.9.9.112.1.3.2.1 | not-accessible | current | |
| casfConfIfAtmAddress OBJECT-TYPE The ATM Address that identifies this interface. This address can be used to setup soft VC's to this interface over an ATM network. | 1.3.6.1.4.1.9.9.112.1.3.2.1.1 | AtmAddr | read-only | current |
| casfConfIfUpcIntent OBJECT-TYPE Specifies the default Usage Parameter Control (UPC) action to use at this interface for connections that do not explicitly specify a UPC action. | 1.3.6.1.4.1.9.9.112.1.3.2.1.2 | INTEGER {pass(1), tagDrop(2), tag(3), drop(4)} | read-write | current |
| casfConfIfBcDefault OBJECT-TYPE Specifies the default Committed Burst Size (Bc) value to use at this interface for connections that do not explicitly specify the value of Bc. | 1.3.6.1.4.1.9.9.112.1.3.2.1.3 | Integer32 (0..32768) | read-write | current |
| casfConfIfCledSpvcDeModeDef OBJECT-TYPE Specifies the default mapping from Congestion Loss Priority (CLP) bit on the ATM side to Discard Eligibility (DE) bit on the Frame Relay side. This is used when receiving a soft PVC Setup using the standard encoding of the called Soft PVC IE. Otherwise a proprietary encoding provides this information. | 1.3.6.1.4.1.9.9.112.1.3.2.1.4 | INTEGER {deIfClpOrFrsscsDe(1), deIfFrsscsDe(2)} | read-write | current |
| casfConfIfCledSpvcClpModeDef OBJECT-TYPE Specifies the default mapping from Discard Eligibility (DE) bit on the Frame Relay side to Congestion Loss Priority (CLP) bit on the ATM side.This is used when receiving a soft PVC Setup using the standard encoding of the called Soft PVC IE. Otherwise a proprietary encoding provides this information. | 1.3.6.1.4.1.9.9.112.1.3.2.1.5 | INTEGER {clpIfDe(1), clpIfIsZero(2), clpIfIsOne(3)} | read-write | current |
| casfFrCounts OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.112.1.4 | |||
| casfVcCountTable OBJECT-TYPE A table containing counters at Frame Relay connection end-points. Entries in this table are created and deleted whenever corresponding entries in the casfVcEndptTable are created and deleted. | 1.3.6.1.4.1.9.9.112.1.4.1 | not-accessible | current | |
| casfVcCountEntry OBJECT-TYPE Counters at a Frame Relay connection end-point, which is identified by the ifIndex of the Frame Relay interface and the DLCI number. | 1.3.6.1.4.1.9.9.112.1.4.1.1 | not-accessible | current | |
| casfVcCountReceivedFrames OBJECT-TYPE Number of frames received. | 1.3.6.1.4.1.9.9.112.1.4.1.1.1 | Counter32 | read-only | current |
| casfVcCountReceivedOctets OBJECT-TYPE Number of octets received. This counter counts octets from the beginning of the frame relay header field to the end of user data. | 1.3.6.1.4.1.9.9.112.1.4.1.1.2 | Counter32 | read-only | current |
| casfVcCountReceivedFECNs OBJECT-TYPE Number of frames received from the network with the FECN (Forward Explicit Congestion Notification) bit set. | 1.3.6.1.4.1.9.9.112.1.4.1.1.3 | Counter32 | read-only | current |
| casfVcCountReceivedBECNs OBJECT-TYPE Number of frames received from the network with the BECN (Backward Explicit Network Congestion) bit set. | 1.3.6.1.4.1.9.9.112.1.4.1.1.4 | Counter32 | read-only | current |
| casfVcCountReceivedDEs OBJECT-TYPE Number of frames received with the Discard Eligibility (DE) bit set. | 1.3.6.1.4.1.9.9.112.1.4.1.1.5 | Counter32 | read-only | current |
| casfVcCountInDiscards OBJECT-TYPE Number of frames received that were discarded at ingress. Possible reasons are policing, congestion. | 1.3.6.1.4.1.9.9.112.1.4.1.1.6 | Counter32 | read-only | current |
| casfVcCountOutDiscards OBJECT-TYPE Number of frames that were to be transmitted but were discarded. Possible reasons are policing, lack of buffers. | 1.3.6.1.4.1.9.9.112.1.4.1.1.7 | Counter32 | read-only | current |
| casfVcCountSentFrames OBJECT-TYPE Number of frames sent. | 1.3.6.1.4.1.9.9.112.1.4.1.1.8 | Counter32 | read-only | current |
| casfVcCountSentOctets OBJECT-TYPE Number of octets sent. This counter counts octets from the beginning of the frame relay header field to the end of user data. | 1.3.6.1.4.1.9.9.112.1.4.1.1.9 | Counter32 | read-only | current |
| casfVcCountSentFECNs OBJECT-TYPE Number of frames that were sent with the FECN bit set. | 1.3.6.1.4.1.9.9.112.1.4.1.1.10 | Counter32 | read-only | current |
| casfVcCountSentBECNs OBJECT-TYPE Number of frames sent with the BECN bit set. | 1.3.6.1.4.1.9.9.112.1.4.1.1.11 | Counter32 | read-only | current |
| casfVcCountSentDEs OBJECT-TYPE Number of frames sent with the DE bit set. | 1.3.6.1.4.1.9.9.112.1.4.1.1.12 | Counter32 | read-only | current |
| casfVcCountTaggedFECNs OBJECT-TYPE Number of frames for which the switch set the FECN bit. | 1.3.6.1.4.1.9.9.112.1.4.1.1.13 | Counter32 | read-only | current |
| casfVcCountTaggedBECNs OBJECT-TYPE Number of frames for which the switch set the BECN bit. | 1.3.6.1.4.1.9.9.112.1.4.1.1.14 | Counter32 | read-only | current |
| casfVcCountTaggedDEs OBJECT-TYPE Number of frames for which the switch set the DE bit. | 1.3.6.1.4.1.9.9.112.1.4.1.1.15 | Counter32 | read-only | current |
| casfVcIwfCountTable OBJECT-TYPE This table contains counters at the Frame Relay endpoint of FR-ATM interworking connections. There is an entry in this table corresponding to each entry in casfVcEndptTable. | 1.3.6.1.4.1.9.9.112.1.4.2 | not-accessible | current | |
| casfVcIwfCountEntry OBJECT-TYPE A set of counters at the Frame Relay endpoint of a FR-ATM interworking connection. | 1.3.6.1.4.1.9.9.112.1.4.2.1 | not-accessible | current | |
| casfVcIwfCountInUnknownProts OBJECT-TYPE Frames received with unknown protocol. This event is counted only for connections with service interworking in translation mode. For other types of connections, this count will remain at zero. | 1.3.6.1.4.1.9.9.112.1.4.2.1.1 | Counter32 | read-only | current |
| casfVcIwfCountOutUnknownProts OBJECT-TYPE Outbound frames that were not transmitted because they contained an unknown protocol. This event is counted only for connections with service interworking in translation mode. For other types of connections, this count will remain at zero. | 1.3.6.1.4.1.9.9.112.1.4.2.1.2 | Counter32 | read-only | current |
| casfVcIwfCountReassemblyTimeouts OBJECT-TYPE The number of frames which could not be completely reassembled due to a reassembly timeout, and were thus discarded before being transmitted on this connection. | 1.3.6.1.4.1.9.9.112.1.4.2.1.3 | Counter32 | read-only | current |
| casfVcIwfCountLengthErrors OBJECT-TYPE The number of reassembled frames intended to be transmitted on this connection for which the AAL5 PDU trailer length fields did not match the actual PDU length, and were thus discarded. | 1.3.6.1.4.1.9.9.112.1.4.2.1.4 | Counter32 | read-only | current |
| casfVcIwfCountCrcErrors OBJECT-TYPE The number of reassembled frames intended to be transmitted on this connection for which the AAL5 PDU had CRC errors, and were thus discarded. | 1.3.6.1.4.1.9.9.112.1.4.2.1.5 | Counter32 | read-only | current |
| casfVcIwfCountTotalDiscardFrames OBJECT-TYPE The number of frames intended to be transmitted on this connection that were discarded due to any reason including those described in other objects in this table (e.g., frames that were discarded because insufficient buffer space was available for reassembling the frame). | 1.3.6.1.4.1.9.9.112.1.4.2.1.6 | Counter32 | read-only | current |
| casfMapping OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.112.1.5 | |||
| casfFAMapTable OBJECT-TYPE This table provides mapping from a DLCI on a Frame Relay interface to a VPI/VCI on an internal ATM interface. | 1.3.6.1.4.1.9.9.112.1.5.1 | not-accessible | current | |
| casfFAMapEntry OBJECT-TYPE Given the ifIndex of a frame relay interface, and a DLCI on that interface, this entry provides the ifIndex and VPI/VCI on the corresponding internal atm interface. | 1.3.6.1.4.1.9.9.112.1.5.1.1 | not-accessible | current | |
| casfFAMapDlci OBJECT-TYPE The DLCI value. | 1.3.6.1.4.1.9.9.112.1.5.1.1.1 | DlciValue | not-accessible | current |
| casfFAMapInternalAtmInterface OBJECT-TYPE The ifIndex of the internal ATM interface to which this DLCI is mapped. | 1.3.6.1.4.1.9.9.112.1.5.1.1.2 | InterfaceIndex | read-only | current |
| casfFAMapInternalAtmVpi OBJECT-TYPE The VPI value to which this DLCI is mapped. | 1.3.6.1.4.1.9.9.112.1.5.1.1.3 | INTEGER (0..255) | read-only | current |
| casfFAMapInternalAtmVci OBJECT-TYPE The VCI value to which this DLCI is mapped. | 1.3.6.1.4.1.9.9.112.1.5.1.1.4 | INTEGER (0..65535) | read-only | current |
| casfAFMapTable OBJECT-TYPE This table provides mapping from an atmVclEntry on an internal ATM internal to a casfVcEndptEntry on a Frame Relay interface. | 1.3.6.1.4.1.9.9.112.1.5.2 | not-accessible | current | |
| casfAFMapEntry OBJECT-TYPE Given the ifIndex of an internal ATM interface, and VPI/VCI, provides the ifIndex of a Frame Relay interface and DLCI, if such mapping exists. The value of ifType for an internal ATM interface is propVirtual(53). For every such interface on the switch, this table contains an entry for each virtual channel link (VCL) that maps to a frame relay connection. Entries in this table come and go as the corresponding frame relay connections come and go. | 1.3.6.1.4.1.9.9.112.1.5.2.1 | not-accessible | current | |
| casfAFMapAtmVpi OBJECT-TYPE The VPI value of the Virtual Channel Link (VCL) on the ATM interface. | 1.3.6.1.4.1.9.9.112.1.5.2.1.1 | INTEGER (0..255) | not-accessible | current |
| casfAFMapAtmVci OBJECT-TYPE The VCI value of the Virtual Channel Link (VCL) on the ATM interface. | 1.3.6.1.4.1.9.9.112.1.5.2.1.2 | INTEGER (0..65535) | not-accessible | current |
| casfAFMapFrIndex OBJECT-TYPE The ifIndex of the frame relay interface that this VCL maps to. | 1.3.6.1.4.1.9.9.112.1.5.2.1.3 | InterfaceIndex | read-only | current |
| casfAFMapFrDlci OBJECT-TYPE The DLCI on the frame relay interface that this VCL maps to. | 1.3.6.1.4.1.9.9.112.1.5.2.1.4 | DlciValue | read-only | current |
| ciscoAtmSFrIwfMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.112.3 | |||
| ciscoAtmSFrIwfMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.112.3.1 | |||
| ciscoAtmSFrIwfMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.112.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoAtmSFrIwfMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco Atm Switch FR IWF MIB. | 1.3.6.1.4.1.9.9.112.3.1.1 | current |
| ciscoAtmSFrIwfConfConnGroup OBJECT-GROUP A collection of objects which allow configuration of FR-ATM connections on an ATM switch. | 1.3.6.1.4.1.9.9.112.3.2.1 | current |
| ciscoAtmSFrIwfLmiGroup OBJECT-GROUP A collection of objects for configuring and monitoring LMI on an FR interface. | 1.3.6.1.4.1.9.9.112.3.2.2 | current |
| ciscoAtmSFrIwfConfIfGroup OBJECT-GROUP A collection of objects which allow configuration of interworking related parameters on an FR interface. | 1.3.6.1.4.1.9.9.112.3.2.3 | current |
| ciscoAtmSFrIwfVcStatsGroup OBJECT-GROUP A collection of counters at FR VC end-points. | 1.3.6.1.4.1.9.9.112.3.2.4 | current |
| ciscoAtmSFrIwfVcIwStatsGroup OBJECT-GROUP A collection of counters related to FR-ATM interworking at FR VC end-points. | 1.3.6.1.4.1.9.9.112.3.2.5 | current |
| ciscoAtmSFrIwfMappingGroup OBJECT-GROUP A collection of objects that describe the mapping from a FR connection end-point to an ATM VCL, and vice versa. | 1.3.6.1.4.1.9.9.112.3.2.6 | current |