MIBs Depot

CISCO-ATM-QOS-MIB

Registered at
1.3.6.1.4.1.9.9.279
Last updated
2002-06-10 00:00
Organization
Cisco Systems, Inc.
Revisions
2002-06-10 00:00
Namespace
cisco
Source file
CISCO-ATM-QOS-MIB
Digest
sha256:0b87a00b2efea03c987a9e5da5cb6a096da0b816f6424b93282e1ebd4763d77b

Description

The MIB is created to provide ATM QoS information in these areas: 1. Traffic shaping on a per-VC basis 2. Traffic shaping on a per-VP basis 3. Per-VC queuing/buffering Although the initial requirements of the MIB are driven to support the GSR TAZ line card, CISCO-ATM-QOS-MIB is designed as a generic MIB to support ATM interfaces across all platforms. Here are the tables defined in this MIB: ciscoAtmQosVccTable - to provide information on traffic shaping on a per-VC basis. ciscoAtmQosVpcTable - to provide information on traffic shaping on a per-VP basis. ciscoAtmQosVcQueuingTable ciscoAtmQosVcQueuingClassTable - to provide information on per-VC queuing/buffering.

Contact

Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 SA Tel: +1 800 553-NETS Email: cs-atm@cisco.com

Imports

FromSymbols
ATM-FORUM-TC-MIBAtmServiceCategory
ATM-MIBatmVclVci, atmVclVpi, atmVplVpi
CISCO-SMIciscoMgmt
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-FORUM-TC-MIB
ATM-MIB
ATM-TC-MIB
CISCO-ATM-QOS-MIB
CISCO-SMI
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
VcParamConfigLocation
TEXTUAL-CONVENTION
The configuration source of a vc parameter: 1 - Not configured - using default 2 - Configured on vc directly 3 - VC-class configured on vc 4 - VC-class configured on sub-interface 5 - VC-class configured on main-interface.
current
VpState
TEXTUAL-CONVENTION
States of virtual path: 1 - Inactive 2 - Active
current

Objects

NameOIDSyntaxAccessStatus
ciscoAtmQosMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.279.0
ciscoAtmQosMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.279.1
caqVccParams
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.279.1.1
caqVccParamsTable
OBJECT-TYPE
This table is defined to provide QoS information for each active ATM VC existing on the interface.
1.3.6.1.4.1.9.9.279.1.1.1not-accessiblecurrent
caqVccParamsEntry
OBJECT-TYPE
This list contains the ATM QoS parameters provided by ciscoAtmQosVccEntry.
1.3.6.1.4.1.9.9.279.1.1.1.1not-accessiblecurrent
caqVccParamsType
OBJECT-TYPE
The service category of this virtual circuit connection.
1.3.6.1.4.1.9.9.279.1.1.1.1.1AtmServiceCategoryread-writecurrent
caqVccParamsPcrIn0
OBJECT-TYPE
Input Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 0 (clp0).
1.3.6.1.4.1.9.9.279.1.1.1.1.2Unsigned32read-writecurrent
caqVccParamsPcrIn01
OBJECT-TYPE
Number of OAM F5 end to end loopback cells sent through the VCC.
1.3.6.1.4.1.9.9.279.1.1.1.1.3Unsigned32read-writecurrent
caqVccParamsPcrOut0
OBJECT-TYPE
Output Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 0 (clp0).
1.3.6.1.4.1.9.9.279.1.1.1.1.4Unsigned32read-writecurrent
caqVccParamsPcrOut01
OBJECT-TYPE
Output Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 1 (clp01).
1.3.6.1.4.1.9.9.279.1.1.1.1.5Unsigned32read-writecurrent
caqVccParamsScrIn0
OBJECT-TYPE
Input Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
1.3.6.1.4.1.9.9.279.1.1.1.1.6Unsigned32read-writecurrent
caqVccParamsScrIn01
OBJECT-TYPE
Input Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
1.3.6.1.4.1.9.9.279.1.1.1.1.7Unsigned32read-writecurrent
caqVccParamsScrOut0
OBJECT-TYPE
Output Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
1.3.6.1.4.1.9.9.279.1.1.1.1.8Unsigned32read-writecurrent
caqVccParamsScrOut01
OBJECT-TYPE
Output Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
1.3.6.1.4.1.9.9.279.1.1.1.1.9Unsigned32read-writecurrent
caqVccParamsBcsIn0
OBJECT-TYPE
Input Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
1.3.6.1.4.1.9.9.279.1.1.1.1.10Unsigned32read-writecurrent
caqVccParamsBcsIn01
OBJECT-TYPE
Input Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
1.3.6.1.4.1.9.9.279.1.1.1.1.11Unsigned32read-writecurrent
caqVccParamsBcsOut0
OBJECT-TYPE
Output Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
1.3.6.1.4.1.9.9.279.1.1.1.1.12Unsigned32read-writecurrent
caqVccParamsBcsOut01
OBJECT-TYPE
Output Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
1.3.6.1.4.1.9.9.279.1.1.1.1.13Unsigned32read-writecurrent
caqVccParamsInheritLevel
OBJECT-TYPE
The source of configuration for peak cell rate.
1.3.6.1.4.1.9.9.279.1.1.1.1.14VcParamConfigLocationread-onlycurrent
caqVccParamsMcrIn
OBJECT-TYPE
Input Minimum Cell Rate (MCR) in kbps for connection with VBR-nrt or ABR type of QoS.
1.3.6.1.4.1.9.9.279.1.1.1.1.15Unsigned32read-writecurrent
caqVccParamsMcrOut
OBJECT-TYPE
Output Minimum Cell Rate (MCR) in kbps for connection with VBR-nrt or ABR type of QoS.
1.3.6.1.4.1.9.9.279.1.1.1.1.16Unsigned32read-writecurrent
caqVccParamsInvRdf
OBJECT-TYPE
Inverse of rate decrease factor.
1.3.6.1.4.1.9.9.279.1.1.1.1.17Unsigned32read-writecurrent
caqVccParamsInvRif
OBJECT-TYPE
Inverse of rate increase factor.
1.3.6.1.4.1.9.9.279.1.1.1.1.18Unsigned32read-writecurrent
caqVccParamsRfl
OBJECT-TYPE
The source of configuration for rate factor.
1.3.6.1.4.1.9.9.279.1.1.1.1.19VcParamConfigLocationread-onlycurrent
caqVccParamsCdv
OBJECT-TYPE
Cell delay variation.
1.3.6.1.4.1.9.9.279.1.1.1.1.20Unsigned32read-onlycurrent
caqVccParamsCdvt
OBJECT-TYPE
Cell delay variation tolerance.
1.3.6.1.4.1.9.9.279.1.1.1.1.21Unsigned32read-writecurrent
caqVccParamsIcr
OBJECT-TYPE
Initial cell rate.
1.3.6.1.4.1.9.9.279.1.1.1.1.22Unsigned32read-writecurrent
caqVccParamsTbe
OBJECT-TYPE
Transient buffer exposure.
1.3.6.1.4.1.9.9.279.1.1.1.1.23Unsigned32read-writecurrent
caqVccParamsFrtt
OBJECT-TYPE
Fixed round-trip time.
1.3.6.1.4.1.9.9.279.1.1.1.1.24Unsigned32read-writecurrent
caqVccParamsNrm
OBJECT-TYPE
Maximum number of tx cells for each forward rm cell.
1.3.6.1.4.1.9.9.279.1.1.1.1.25Unsigned32read-writecurrent
caqVccParamsInvTrm
OBJECT-TYPE
Maximum time between forward rm cells.
1.3.6.1.4.1.9.9.279.1.1.1.1.26Unsigned32read-writecurrent
caqVccParamsInvCdf
OBJECT-TYPE
Inverse of cutoff decrease factor.
1.3.6.1.4.1.9.9.279.1.1.1.1.27Unsigned32read-writecurrent
caqVccParamsAdtf
OBJECT-TYPE
Allowed cell rate decrease time factor.
1.3.6.1.4.1.9.9.279.1.1.1.1.28Unsigned32read-writecurrent
caqVpcParams
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.279.1.2
caqVpcParamsTable
OBJECT-TYPE
This table is defined to provide QoS information for each active ATM VP existing on the interface.
1.3.6.1.4.1.9.9.279.1.2.1not-accessiblecurrent
caqVpcParamsEntry
OBJECT-TYPE
This list contains the ATM QoS parameters provided by ciscoAtmQosVpcEntry.
1.3.6.1.4.1.9.9.279.1.2.1.1not-accessiblecurrent
caqVpcParamsVpState
OBJECT-TYPE
VP state of the current permanent virtual path.
1.3.6.1.4.1.9.9.279.1.2.1.1.1VpStateread-onlycurrent
caqVpcParamsPeakRate
OBJECT-TYPE
Maximum rate in kbps at which the associated permanent virtual path can transmit data.
1.3.6.1.4.1.9.9.279.1.2.1.1.2Unsigned32read-onlycurrent
caqVpcParamsCesRate
OBJECT-TYPE
Maximum rate in kbps at which CES VCs can transmit data with the associated permanent virtual path.
1.3.6.1.4.1.9.9.279.1.2.1.1.3Unsigned32read-onlycurrent
caqVpcParamsDataVcCount
OBJECT-TYPE
Number of data VCs currently associated with the permanent virtual path.
1.3.6.1.4.1.9.9.279.1.2.1.1.4Integer32 (0..65535)read-onlycurrent
caqVpcParamsCesVcCount
OBJECT-TYPE
Number of CES VCs currently associated with the permanent virtual path.
1.3.6.1.4.1.9.9.279.1.2.1.1.5Integer32 (0..65535)read-onlycurrent
caqVpcParamsVcdF4Seg
OBJECT-TYPE
Vcd for F4 OAM segment processing.
1.3.6.1.4.1.9.9.279.1.2.1.1.6Integer32 (0..65535)read-onlycurrent
caqVpcParamsVcdF4Ete
OBJECT-TYPE
Vcd for F4 OAM end to end processing.
1.3.6.1.4.1.9.9.279.1.2.1.1.7Integer32 (0..65535)read-onlycurrent
caqVpcParamsScr
OBJECT-TYPE
Sustained cell rate associated with the PVP.
1.3.6.1.4.1.9.9.279.1.2.1.1.8Unsigned32read-onlycurrent
caqVpcParamsMbs
OBJECT-TYPE
Maximum burst size associated with the PVP.
1.3.6.1.4.1.9.9.279.1.2.1.1.9Unsigned32read-onlycurrent
caqVpcParamsAvailBw
OBJECT-TYPE
Bandwidth in Kbps currently currently available on this PVP.
1.3.6.1.4.1.9.9.279.1.2.1.1.10Unsigned32read-onlycurrent
caqQueuingParams
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.279.1.3
caqQueuingParamsTable
OBJECT-TYPE
This table provides queuing related information for a VC existing on an ATM interface.
1.3.6.1.4.1.9.9.279.1.3.1not-accessiblecurrent
caqQueuingParamsEntry
OBJECT-TYPE
This is defined as an entry in caqQueuingParamsTable.
1.3.6.1.4.1.9.9.279.1.3.1.1not-accessiblecurrent
caqQueuingParamsMeanQDepth
OBJECT-TYPE
Mean Queue Depth associated with the vc. This value is calculated based on the actual queue depth on the interface and the exponential weighting constant.
1.3.6.1.4.1.9.9.279.1.3.1.1.1Unsigned32read-onlycurrent
caqQueuingParamsClassTable
OBJECT-TYPE
This table provides queuing information for all queuing classes associating with a VC.
1.3.6.1.4.1.9.9.279.1.3.2not-accessiblecurrent
caqQueuingParamsClassEntry
OBJECT-TYPE
This is defined as an entry in ciscoAtmQosVcQueuingClassTable to provide queuing information of a specific class.
1.3.6.1.4.1.9.9.279.1.3.2.1not-accessiblecurrent
caqQueuingParamsClassIndex
OBJECT-TYPE
A class index, which associates with an IP precedence (0 to 8), is defined to reference individual caqQueuingParamsClassEntry.
1.3.6.1.4.1.9.9.279.1.3.2.1.1Integer32 (0..8)not-accessiblecurrent
caqQueuingParamsClassRandDrp
OBJECT-TYPE
Number of packets dropped when Mean Queue Length is between Minimum Threshold and Maximum Threshold range.
1.3.6.1.4.1.9.9.279.1.3.2.1.2Unsigned32read-onlycurrent
caqQueuingParamsClassTailDrp
OBJECT-TYPE
Number of packets dropped because the Mean Queue Depth exceeds the Maximum Threshold value.
1.3.6.1.4.1.9.9.279.1.3.2.1.3Unsigned32read-onlycurrent
caqQueuingParamsClassMinThre
OBJECT-TYPE
Minimum Threshold value in kbps.
1.3.6.1.4.1.9.9.279.1.3.2.1.4Unsigned32read-onlycurrent
caqQueuingParamsClassMaxThre
OBJECT-TYPE
Maximum Threshold value in kbps.
1.3.6.1.4.1.9.9.279.1.3.2.1.5Unsigned32read-onlycurrent
caqQueuingParamsClassMrkProb
OBJECT-TYPE
Mark probability denominator. This is the value used in the calculation of a packet being dropped when the average queue size is between the minimum threshold and the maximum threshold.
1.3.6.1.4.1.9.9.279.1.3.2.1.6Unsigned32read-onlycurrent
ciscoAtmQosMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.279.2
ciscoAtmQosMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.279.2.1
ciscoAtmQosMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.279.2.2

Conformance

NameOIDStatus
ciscoAtmQosMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement this Cisco ATM QoS MIB.
1.3.6.1.4.1.9.9.279.2.1.1current
ciscoAtmQosVccGroup
OBJECT-GROUP
A collection of objects providing per-VC ATM QoS related info.
1.3.6.1.4.1.9.9.279.2.2.1current
ciscoAtmQosVccAddon1Group
OBJECT-GROUP
Add-on objects providing per-VC ATM QoS related info.
1.3.6.1.4.1.9.9.279.2.2.2current
ciscoAtmQosVpcGroup
OBJECT-GROUP
A collection of objects providing per-VP ATM QoS related info.
1.3.6.1.4.1.9.9.279.2.2.3current
ciscoAtmQosVpcAddon1Group
OBJECT-GROUP
Add-on objects providing per-VP ATM QoS related info.
1.3.6.1.4.1.9.9.279.2.2.4current
ciscoAtmQosVcQueuingGroup
OBJECT-GROUP
A collection of objects providing per-VC queuing/buffering related info.
1.3.6.1.4.1.9.9.279.2.2.5current