MIBs Depot

CIENA-CES-RSVPTE-MIB

Registered at
1.3.6.1.4.1.1271.2.1.16
Last updated
2016-07-15 00:00
Organization
Ciena, Inc
Revisions
2016-07-15 00:00, 2016-07-14 00:00, 2016-07-04 00:00, 2013-05-08 00:00, 2011-02-02 00:00
Namespace
ciena
Source file
CIENA-CES-RSVPTE-MIB
Digest
sha256:8d981bf04a225ca9353907e77d7207909a209d123b675dae086eb5661087450d

Description

This MIB module is for the RSVP-TE configuration for MPLS tunnels

Contact

Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com

Imports

FromSymbols
CIENA-SMIcienaCesConfig, cienaCesNotifications
CIENA-TCCienaGlobalState
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CIENA-CES-RSVPTE-MIB
CIENA-SMI
CIENA-TC
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
AdvertisedLabel
TEXTUAL-CONVENTION
Advertised Label
current
RsvpGRMode
TEXTUAL-CONVENTION
The current GR operational state of RSVP-TE.
current
RsvpOperStatus
TEXTUAL-CONVENTION
The current operational state of RSVP-TE.
current

Objects

NameOIDSyntaxAccessStatus
cienaCesRsvpteMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.16.1
cienaCesRsvpteObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.16.1.1
cienaCesRsvpteAdminStatus
OBJECT-TYPE
The desired administrative status of RSVP-TE.
1.3.6.1.4.1.1271.2.1.16.1.1.1CienaGlobalStateread-onlycurrent
cienaCesRsvpteOperStatus
OBJECT-TYPE
The current operational status of RSVP-TE.
1.3.6.1.4.1.1271.2.1.16.1.1.2RsvpOperStatusread-onlycurrent
cienaCesRsvpteRetryInterval
OBJECT-TYPE
The persistent tunnel retry interval. This is the interval between the first failure of a persistent tunnel and the first attempt to re-establish the tunnel. This cannot be changed while the administrative status is enabled or the operational status is up.
1.3.6.1.4.1.1271.2.1.16.1.1.3Unsigned32 (3..65)read-onlycurrent
cienaCesRsvpteRetryInfiniteState
OBJECT-TYPE
The persistent tunnel retry infinity. This is the state which when on, triggers RSVP-TE to try to restore the tunnels infinite times. This object can only be set if RSVP-TE is globally disabled.
1.3.6.1.4.1.1271.2.1.16.1.1.4INTEGER {on(1), off(2)}read-onlycurrent
cienaCesRsvpteRetryMax
OBJECT-TYPE
The maximum number of retry attempts that will be made before a persistent tunnel is deemed inoperable. Once in this state, a management agent should set mplsTunnelAdminStatus to 'up' to attempt to re-establish the tunnel. This field is not used when cienaCesRsvpteRetryInfiniteState is on.
1.3.6.1.4.1.1271.2.1.16.1.1.5INTEGER (1..255)read-onlycurrent
cienaCesRsvpteRefreshInterval
OBJECT-TYPE
The RSVP-TE value, R, which is used to set the average interval between refresh path and RESV messages.
1.3.6.1.4.1.1271.2.1.16.1.1.6Integer32read-onlycurrent
cienaCesRsvpteRefreshMultiple
OBJECT-TYPE
The RSVP-TE value, K, which is the number of unresponded path or RESV refresh attempts that must be made, spaced by the refresh interval, before the state is deemed to have timed out.
1.3.6.1.4.1.1271.2.1.16.1.1.7Integer32 (1..214783647)read-onlycurrent
cienaCesRsvpteRfrshSlewDenom
OBJECT-TYPE
This object is deprecated and the new object to provide this information is cienaCesRsvpteRefreshSlewDenominator in this table.
1.3.6.1.4.1.1271.2.1.16.1.1.8Integer32 (1..214783647)read-onlydeprecated
cienaCesRsvpteRfrshSlewNumerator
OBJECT-TYPE
This object is deprecated and the new object to provide this information is cienaCesRsvpteRefreshSlewNumerator in this table.
1.3.6.1.4.1.1271.2.1.16.1.1.9Integer32 (1..214783647)read-onlydeprecated
cienaCesRsvpteBlockadeMultiple
OBJECT-TYPE
The RSVP-TE value, Kb, which is the number of refresh timeout periods after which the blockade state is deleted.
1.3.6.1.4.1.1271.2.1.16.1.1.10Integer32 (1..214783647)read-onlycurrent
cienaCesRsvpteLSPSetupPriority
OBJECT-TYPE
The setup priority to apply to LSPs that are not signaling this parameter. 0 represents the highest priority and 7 the lowest. The value of this object must be numerically greater than or equal to (lower or equal priority) than the value of the holding priority object.
1.3.6.1.4.1.1271.2.1.16.1.1.11Integer32 (0..7)read-onlycurrent
cienaCesRsvpteLSPHoldingPriority
OBJECT-TYPE
The holding priority to apply to LSPs that are not signaling this parameter. 0 represents the highest priority and 7 the lowest. The value of this object must be numerically less than or equal to (higher or equal priority) than the value of the holding priority object.
1.3.6.1.4.1.1271.2.1.16.1.1.12Integer32 (0..7)read-onlycurrent
cienaCesRsvpteUseHopByHop
OBJECT-TYPE
A flag to indicate that RSVP-TE should use the hop by hop addressing scheme for the PATH and PATH-TEAR messages it sends. If set, then the IP addresses used in the IP header of the PATH messages forwarded by RSVP-TE set the source as the local outgoing interface IP address, and set the destination as the next hop router IP address.
1.3.6.1.4.1.1271.2.1.16.1.1.13TruthValueread-onlycurrent
cienaCesRsvpteRestartCapable
OBJECT-TYPE
A flag to indicate whether the local node should advertise itself as restart capable.
1.3.6.1.4.1.1271.2.1.16.1.1.14TruthValueread-onlycurrent
cienaCesRsvpteRestartTime
OBJECT-TYPE
The time in milliseconds that the local node takes to restart RSVP-TE and the communication channel used for RSVP-TE communication. This is advertised to neighbors in the Restart_Cap object in Hello messages. Only used if cienaCesRsvpteRestartCapable is set to true. For devices which only act as the Helper node, this timer is unused and will return value 0.
1.3.6.1.4.1.1271.2.1.16.1.1.15Unsigned32read-onlycurrent
cienaCesRsvpteRecoveryTime
OBJECT-TYPE
The period of time in milliseconds that the local node would like neighbors to take to resyncronize RSVP-TE and MPLS forwarding information after the re-establishment of Hello connectivity. This is advertised to neighbors in the Restart_Cap object in Hello messages. A value of zero indicates that the node does not support resynchronization following failure of the local node. A value of 0xFFFFFFFF indicates an infinite recovery time. Only used if cienaCesRsvpteRestartCapable is set to true. For devices which only act as the Helper node, this timer is unused and will return value 0.
1.3.6.1.4.1.1271.2.1.16.1.1.16Unsigned32read-onlycurrent
cienaCesRsvpteMinPeerRestart
OBJECT-TYPE
The mininum period of time in milliseconds that RSVP-TE should wait for a restart capable neighbor to regain Hello connectivity before invoking procedures related to communication loss. RSVP-TE waits for the maximum of this time and the restart_time advertised in the RESTART_CAP object in Hello messages from the neighbor.
1.3.6.1.4.1.1271.2.1.16.1.1.17Integer32read-onlycurrent
cienaCesRsvpteRefreshSlewDenominator
OBJECT-TYPE
The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value.
1.3.6.1.4.1.1271.2.1.16.1.1.18Integer32 (1..214783647)read-onlycurrent
cienaCesRsvpteRefreshSlewNumerator
OBJECT-TYPE
The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value.
1.3.6.1.4.1.1271.2.1.16.1.1.19Integer32 (1..214783647)read-onlycurrent
cienaCesRsvpteGRAdminStatus
OBJECT-TYPE
RSVP-TE Graceful restart status (Enabled/Disabled).
1.3.6.1.4.1.1271.2.1.16.1.1.20CienaGlobalStateread-onlycurrent
cienaCesRsvpteGRMode
OBJECT-TYPE
RSVP-TE Graceful restart Operational status.
1.3.6.1.4.1.1271.2.1.16.1.1.21RsvpGRModeread-onlycurrent
cienaCesRsvpte
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.16.1.2
cienaCesRsvpteIfTable
OBJECT-TYPE
A table of interfaces on which RSVP-TE can be enabled.
1.3.6.1.4.1.1271.2.1.16.1.2.1not-accessiblecurrent
cienaCesRsvpteIfEntry
OBJECT-TYPE
An entry in the RSVP-TE interface table.
1.3.6.1.4.1.1271.2.1.16.1.2.1.1not-accessiblecurrent
cienaCesRsvpteIfIndex
OBJECT-TYPE
Interface index.
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.1INTEGER (1..4096)not-accessiblecurrent
cienaCesRsvpteIfName
OBJECT-TYPE
Interface name.
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.2OCTET STRING (SIZE(0..32))read-onlycurrent
cienaCesRsvpteIfIpAddr
OBJECT-TYPE
Interface IP address.
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.3IpAddressread-onlycurrent
cienaCesRsvpteIfMtu
OBJECT-TYPE
This object is deprecated and no longer in use.
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.4INTEGER (1500..9216)read-onlydeprecated
cienaCesRsvpteIfAdminStatus
OBJECT-TYPE
RSVP-TE administrative status on this interface.
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.5CienaGlobalStateread-onlycurrent
cienaCesRsvpteIfOperStatus
OBJECT-TYPE
RSVP-TE operational status on this interface.
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.6INTEGER {up(1), down(2)}read-onlycurrent
cienaCesRsvpteIfHelloInterval
OBJECT-TYPE
RSVP-TE Hello message interval.
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.7Unsigned32 (0..30)read-onlycurrent
cienaCesRsvpteIfHelloTolerance
OBJECT-TYPE
RSVP-TE Hello tolerance defines the number of Hello intervals that can pass without receiving a successful Hello message from a partner before the Hello session times out.
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.8Unsigned32 (0..10)read-onlycurrent
cienaCesRsvpteIfAdvertisedLabel
OBJECT-TYPE
This object indicates what kind of label will be advertised by RSVP-TE for a Label Request received on this L3 interface.
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.9AdvertisedLabelread-onlycurrent