MIBs Depot

CIENA-CES-PORT-XCVR-MIB

Registered at
1.3.6.1.4.1.1271.2.1.9
1.3.6.1.4.1.1271.2.2.9
Last updated
2019-01-03 00:00
Organization
Ciena Corp.
Revisions
2019-01-03 00:00, 2018-09-28 00:00, 2018-06-15 00:00, 2017-06-07 00:00, 2016-10-07 00:00, 2011-08-23 00:00, 2011-07-06 00:00
Namespace
ciena
Source file
CIENA-CES-PORT-XCVR-MIB
Digest
sha256:d42701729e1bfd49b16cae88d2fc6e4944e5fa03221e0f16958aa3aaeb33bbfa

Description

This module defines the port XCVR related notifications.

Contact

Mib Meister 7035 Ridge Road Hanover, Maryland 21076 USA Phone: +1 800 921 1144 Email: support@ciena.com

Imports

FromSymbols
CIENA-GLOBAL-MIBcienaGlobalMacAddress, cienaGlobalSeverity
CIENA-SMIcienaCesConfig, cienaCesNotifications
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CIENA-CES-PORT-XCVR-MIB
CIENA-GLOBAL-MIB
CIENA-SMI
CIENA-TC
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
cienaCesPortXcvrMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.9.1
cienaCesPortXcvr
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.9.1.1
cienaCesPortXcvrTable
OBJECT-TYPE
This table contains descriptions and settings for each of the physical transceiver devices.
1.3.6.1.4.1.1271.2.1.9.1.1.1not-accessiblecurrent
cienaCesPortXcvrEntry
OBJECT-TYPE
The transceiver device entry.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1not-accessiblecurrent
cienaCesPortXcvrId
OBJECT-TYPE
The ID for the transceiver.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.1INTEGER (1..65535)not-accessiblecurrent
cienaCesPortXcvrOperState
OBJECT-TYPE
The operational state of the transceiver.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.2INTEGER {disabled(1), enabled(2), loopback(3), notPresent(4), faulted(5)}read-onlycurrent
cienaCesPortXcvrTemperature
OBJECT-TYPE
The temperature of the transceiver. Units are celsius.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.3INTEGER (1..65535)read-onlycurrent
cienaCesPortXcvrVcc
OBJECT-TYPE
The voltage of the transceiver. Units are milli volts
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.4INTEGER (1..65535)read-onlycurrent
cienaCesPortXcvrBias
OBJECT-TYPE
The bias of the transceiver. Units are milli amps
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.5INTEGER (1..65535)read-onlycurrent
cienaCesPortXcvrRxPower
OBJECT-TYPE
The measured receive power of the transceiver. Units are micro watts.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.6INTEGER (1..65535)read-onlycurrent
cienaCesPortXcvrHighTempAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for the temperature alarm. Units are celsius.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.7Integer32read-onlycurrent
cienaCesPortXcvrLowTempAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for the temperature alarm. Units are celsius.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.8Integer32read-onlycurrent
cienaCesPortXcvrHighVccAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for the voltage alarm. Units are milli volts
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.9Integer32read-onlycurrent
cienaCesPortXcvrLowVccAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for the voltage alarm. Units are milli volts
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.10Integer32read-onlycurrent
cienaCesPortXcvrHighBiasAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for the bias alarm. Units are milli amps
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.11Integer32read-onlycurrent
cienaCesPortXcvrLowBiasAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for the bias alarm. Units are milli amps
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.12Integer32read-onlycurrent
cienaCesPortXcvrHighTxPwAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for the Tx power alarm. Units are micro watts
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.13Integer32read-onlycurrent
cienaCesPortXcvrLowTxPwAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for the Tx power alarm. Units are micro watts.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.14Integer32read-onlycurrent
cienaCesPortXcvrHighRxPwAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for the Rx power alarm. Units are micro watts.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.15Integer32read-onlycurrent
cienaCesPortXcvrLowRxPwAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for the Rx power alarm. Units are micro watts.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.16Integer32read-onlycurrent
cienaCesPortXcvrNotifChassisIndex
OBJECT-TYPE
Indicates the chassis index for the port used for trap definition.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.17Unsigned32 (1)accessible-for-notifycurrent
cienaCesPortXcvrNotifShelfIndex
OBJECT-TYPE
Indicates the shelf index for the port used for trap definition.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.18Unsigned32 (1)accessible-for-notifycurrent
cienaCesPortXcvrNotifSlotIndex
OBJECT-TYPE
Indicates the slot index for the port used for trap definition.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.19Unsigned32 (1..7)accessible-for-notifycurrent
cienaCesPortXcvrNotifPortNumber
OBJECT-TYPE
Indicates the port number for the corresponding PGID used for trap definition.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.20Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesPortXcvrIdentiferType
OBJECT-TYPE
Type for the transceiver.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.21INTEGER {unknown(1), gbic(2), solderedType(3), sfp(4), xbi(5), xenpak(6), xfp(7), xff(8), xfpe(9), xpak(10), x2(11), reserved(12), vendorSpecific(13), cfp(14), qsfpPlus(15), qsfp28(16)}read-onlycurrent
cienaCesPortXcvrExtIdentiferType
OBJECT-TYPE
Extended identifier type represents for this transceiver.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.22INTEGERread-onlycurrent
cienaCesPortXcvrConnectorType
OBJECT-TYPE
Type of connector: unknown(1) sc(2) fiberChannelStyle1(3) fiberChannelStyle2(4) bnc/tnc(5) coaxialHeader(6) fiberJack(7) lc(8) mt-rj(9) mu(10) sg(11) opticalPitTail(12) reserved(13..32) hssdc(33) copperPitTail(34) reserved(35..128) vendorSpecific(129..256)
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.23INTEGER (1..65535)read-onlycurrent
cienaCesPortXcvrType
OBJECT-TYPE
Type of transceiver.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.24INTEGER (1..65535)read-onlycurrent
cienaCesPortXcvrVendorName
OBJECT-TYPE
String containing this transceiver's vendor name.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.25DisplayStringread-onlycurrent
cienaCesPortXcvrVendorOUI
OBJECT-TYPE
String containing this transceiver's vendor OUI.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.26OCTET STRING (SIZE(0..255))read-onlycurrent
cienaCesPortXcvrVendorPartNum
OBJECT-TYPE
String containing this transceiver's vendor part number.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.27DisplayStringread-onlycurrent
cienaCesPortXcvrRevNum
OBJECT-TYPE
String containing this tranceiver's part revision number.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.28DisplayStringread-onlycurrent
cienaCesPortXcvrSerialNum
OBJECT-TYPE
String containing this tranceiver's part serial number.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.29DisplayStringread-onlycurrent
cienaCesPortXcvrMfgDate
OBJECT-TYPE
String containing this transceiver's manufactured date.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.30DisplayStringread-onlycurrent
cienaCesPortXcvrWaveLength
OBJECT-TYPE
The wavelength of the transceiver. Units are nano meter.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.31INTEGER (1..65535)read-onlycurrent
cienaCesPortXcvrTxState
OBJECT-TYPE
Indicates whether this transceiver is currently set to transmit.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.32INTEGER {enabled(1), disabled(2)}read-onlycurrent
cienaCesPortXcvrTxFaultStatus
OBJECT-TYPE
Indicates the fault status of this transceiver.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.33INTEGER {fault(1), noFault(2)}read-onlycurrent
cienaCesPortXcvrAdminState
OBJECT-TYPE
The administrative state of the transceiver.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.34INTEGER {disabled(1), enabled(2), loopback(3)}read-onlycurrent
cienaCesPortXcvrTxOutputPower
OBJECT-TYPE
The measured transmitted output power of the transceiver. Units are micro watts.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.35INTEGER (1..65535)read-onlycurrent
cienaCesPortXcvrFecMode
OBJECT-TYPE
This represents the transceiver's FEC Mode. gfec means generic forward error correction, efec means enhanced forward error correction.
1.3.6.1.4.1.1271.2.1.9.1.1.1.1.36INTEGER {none(1), gfec(2), efec(3)}read-onlycurrent
cienaCesPortXcvrNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.9.1.2
cienaCesPortXcvrEventType
OBJECT-TYPE
Indicates if the transceiver specified by the ciena54XXPortXcvrId has come up, gone down or has been selected.
1.3.6.1.4.1.1271.2.1.9.1.2.1INTEGER {inserted(1), removed(2)}read-onlycurrent
cienaCesPortXcvrErrorType
OBJECT-TYPE
Indicates if the transceiver specified by the cienaCesPortXcvrId is faulted because of checksum failure or optical fault. This object only makes sense if the transceiver has been detected faulted; otherwise it returns 'none'.
1.3.6.1.4.1.1271.2.1.9.1.2.2INTEGER {none(0), chksumFailed(1), opticalFault(2)}accessible-for-notifycurrent
cienaCesPortXcvrMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.9.3
cienaCesPortXcvrMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.9.3.1
cienaCesPortXcvrMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.9.3.2
cienaCesPortXcvrMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.2.9
cienaCesPortXcvrMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.2.9.0

Notifications

NameOIDStatus
cienaCesPortXcvrRemovedNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrRemovedNotification is sent if the transceiver has been removed. To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.1current
cienaCesPortXcvrInsertedNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrInsertedNotification is sent if the transceiver has been inserted. To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.2current
cienaCesPortXcvrErrorTypeNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrErrorTypeNotification is sent if the transceiver is detected to be faulted. The reason for the failure is specified by cienaCesPortXcvrErrorType. To enable the device to send this notification: cienaCesPortXcvrErrorTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, and cienaCesPortXcvrErrorType.
1.3.6.1.4.1.1271.2.2.9.0.5current
cienaCesPortXcvrTempHighNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrTempHighNotification is sent if the transceiver temperature exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.6current
cienaCesPortXcvrTempLowNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrTempLowNotification is sent if the transceiver temperature falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.7current
cienaCesPortXcvrTempNormalNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrTempNormalNotification is sent when the transceiver temperature returns to normal state. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.8current
cienaCesPortXcvrVoltageHighNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrVoltageHighNotification is sent if the transceiver voltage exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.9current
cienaCesPortXcvrVoltageLowNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrVoltageLowNotification is sent if the transceiver voltage falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.10current
cienaCesPortXcvrVoltageNormalNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrVoltageNormalNotification is sent when the transceiver voltage returns back to normal state. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.11current
cienaCesPortXcvrBiasHighNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrBiasHighNotification is sent if the transceiver bias exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.12current
cienaCesPortXcvrBiasLowNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrBiasLowNotification is sent if the transceiver bias falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.13current
cienaCesPortXcvrBiasNormalNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrBiasNormalNotification is sent when the transceiver bias returns to normal state. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.14current
cienaCesPortXcvrTxPowerHighNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrTxPowerHighNotification is sent if the transceiver TxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.15current
cienaCesPortXcvrTxPowerLowNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrTxPowerLowNotification is sent if the transceiver TxPower falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.16current
cienaCesPortXcvrTxPowerNormalNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrTxPowerNormalNotification is sent when the transceiver TxPower returns to normal state. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.17current
cienaCesPortXcvrRxPowerHighNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrRxPowerHighNotification is sent if the transceiver RxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.18current
cienaCesPortXcvrRxPowerLowNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrRxPowerLowNotification is sent if the transceiver RxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.19current
cienaCesPortXcvrRxPowerNormalNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrRxPowerNormalNotification is sent when the transceiver RxPower returns to normal state. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.20current
cienaCesPortXcvrSpeedInfoMissingNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrSpeedInfoMissingNotification is sent if the transceiver speed information is not found. To enable the device to send this notification: cienaCesPortXcvrSpeedInfoTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.21current
cienaCesPortXcvrUncertifiedNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrUncertifiedNotification is sent if the transceiver is not certified for use by Ciena. To enable the device to send this notification: cienaCesPortXcvrUncertifiedTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cesPortAllTrapState need to be set to enabled. cienaCesPortXcvrUncertifiedTrapState is set to disabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.22current
cienaCesPortXcvrRxPowerHighWarningNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrRxPowerHighWarningNotification is sent if the transceiver RxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.23current
cienaCesPortXcvrRxPowerLowWarningNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrRxPowerLowWarningNotification is sent if the transceiver RxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.24current
cienaCesPortXcvrTxPowerHighWarningNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrTxPowerHighWarningNotification is sent if the transceiver TxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.25current
cienaCesPortXcvrTxPowerLowWarningNotification
NOTIFICATION-TYPE
A cienaCesPortXcvrTxPowerLowWarningNotification is sent if the transceiver TxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber.
1.3.6.1.4.1.1271.2.2.9.0.26current