MIBs Depot

CIENA-CES-MPLS-MIB

Registered at
1.3.6.1.4.1.1271.2.1.18
1.3.6.1.4.1.1271.2.2.17
Last updated
2016-11-22 00:00
Organization
Ciena, Inc
Revisions
2016-11-22 00:00, 2016-11-17 00:00, 2016-10-21 00:00, 2016-10-12 00:00, 2016-09-21 00:00, 2016-08-29 00:00, 2016-08-22 00:00, 2016-07-18 00:00, 2016-07-12 00:00, 2016-07-11 00:00, 2016-07-04 00:00, 2016-06-10 00:00, 2016-03-11 00:00, 2016-02-15 00:00, 2016-01-04 00:00, 2015-08-18 00:00, 2015-02-23 00:00, 2014-12-01 00:00, 2014-11-04 00:00, 2014-06-11 00:00, 2014-04-08 00:00, 2014-02-28 00:00, 2013-09-27 00:00, 2013-05-08 00:00, 2011-02-02 00:00
Namespace
ciena
Source file
CIENA-CES-MPLS-MIB
Digest
sha256:0d54a53d47c4581f77296e35fb880f36d5ccfc93445519986d8b2fb8e16b471d

Description

This MIB module defines the mgmt objects for the MPLS feature for LEOS based Ciena products.

Contact

Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com

Imports

FromSymbols
CIENA-GLOBAL-MIBcienaGlobalMacAddress, cienaGlobalSeverity
CIENA-SMIcienaCesConfig, cienaCesNotifications
CIENA-TCCienaGlobalState
IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers
MPLS-TC-STD-MIBMplsBitRate
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowPointer, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CIENA-CES-MPLS-MIB
CIENA-GLOBAL-MIB
CIENA-SMI
CIENA-TC
IANA-ADDRESS-FAMILY-NUMBERS-MIB
MPLS-TC-STD-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
AttachGroupType
TEXTUAL-CONVENTION
Attach Group Type
current
AutoSizeFailHdlr
TEXTUAL-CONVENTION
Auto size failure handler.
current
AutoSizeMode
TEXTUAL-CONVENTION
Auto size mode.
current
AutoSizeState
TEXTUAL-CONVENTION
Auto size dynamic states.
current
CacPolicy
TEXTUAL-CONVENTION
MPLS Class Profile Cac Policy
current
FCosPolicy
TEXTUAL-CONVENTION
Frame Cos Policy
current
MplsGlobalState
TEXTUAL-CONVENTION
This textual convention enumerates the administrative and operational state with not applicable value.
current
OperState
TEXTUAL-CONVENTION
Virtual Circuit Opererational State.
current
PathDisjointMode
TEXTUAL-CONVENTION
Tunnel Path Disjoint Mode
current
PathDisjointType
TEXTUAL-CONVENTION
Tunnel Path Disjoint Type
current
PrivateForwardGroup
TEXTUAL-CONVENTION
Private Forwarding Group
current
PseudoWireType
TEXTUAL-CONVENTION
Pseudo Wire Type
current
RCosPolicy
TEXTUAL-CONVENTION
Resolved Cos Policy
current
SRLGState
TEXTUAL-CONVENTION
SRLG state
current
TEMode
TEXTUAL-CONVENTION
TE mode
current
TTLPolicy
TEXTUAL-CONVENTION
TTL Policy
current
TunnelAisFault
TEXTUAL-CONVENTION
This is replaced by TunnelOamFault.
obsolete
TunnelOamFault
TEXTUAL-CONVENTION
Oam fault status on the tunnel.
current
TunnelType
TEXTUAL-CONVENTION
Transport tunnel types for MPLS VC
current
VCFailReason
TEXTUAL-CONVENTION
Virtual Circuit Failure Reason
current
VCState
TEXTUAL-CONVENTION
Current VC state
current
VCStatus
TEXTUAL-CONVENTION
VC Status. This is used for both local and remote status faults
current

Objects

NameOIDSyntaxAccessStatus
cienaCesMplsMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1
cienaCesMpls
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.1
cienaCesMplsGlobalAttrs
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.1.1
cienaCesMplsStaticAdminLabelRangeStart
OBJECT-TYPE
The beginning of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
1.3.6.1.4.1.1271.2.1.18.1.1.1.1INTEGER (16..1048575)read-onlydeprecated
cienaCesMplsStaticAdminLabelRangeEnd
OBJECT-TYPE
The end of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
1.3.6.1.4.1.1271.2.1.18.1.1.1.2INTEGER (16..1048575)read-onlydeprecated
cienaCesMplsStaticOperLabelRangeStart
OBJECT-TYPE
The beginning of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.1.1.3INTEGER (16..1048575)read-onlydeprecated
cienaCesMplsStaticOperLabelRangeEnd
OBJECT-TYPE
The end of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.1.1.4INTEGER (16..1048575)read-onlydeprecated
cienaCesMplsDynamicAdminLabelRangeStart
OBJECT-TYPE
The beginning of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.1.1.5INTEGER (16..1048575)read-onlydeprecated
cienaCesMplsDynamicAdminLabelRangeEnd
OBJECT-TYPE
The end of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.1.1.6INTEGER (16..1048575)read-onlydeprecated
cienaCesMplsDynamicOperLabelRangeStart
OBJECT-TYPE
The beginning of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.1.1.7INTEGER (16..1048575)read-onlydeprecated
cienaCesMplsDynamicOperLabelRangeEnd
OBJECT-TYPE
The end of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.1.1.8INTEGER (16..1048575)read-onlydeprecated
cienaCesMplsStaticIngressTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS static encap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.1.2not-accessiblecurrent
cienaCesMplsStaticIngressTunnelEntry
OBJECT-TYPE
This represents an entry of the MPLS static encap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1not-accessiblecurrent
cienaCesMplsStaticIngressTunnelIndex
OBJECT-TYPE
Unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesMplsStaticIngressTunnelName
OBJECT-TYPE
This represents the encap tunnel name. Tunnel names are common across static and dynamic.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsStaticIngressTunnelWeight
OBJECT-TYPE
A parameter to select the order of precedence of encap tunnels during tunnel switchover or reversion (if tunnel reversion is enabled). A higher weight indicates higher preference during switchover or reversion.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.3INTEGER (1..8)read-onlycurrent
cienaCesMplsStaticIngressTunnelNextHopIp
OBJECT-TYPE
Specifies the next hop IP address for the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.4IpAddressread-onlycurrent
cienaCesMplsStaticIngressTunnelAdminState
OBJECT-TYPE
Specifies the administrative status of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.5CienaGlobalStateread-onlycurrent
cienaCesMplsStaticIngressTunnelOperState
OBJECT-TYPE
Specifies the operational status of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.6CienaGlobalStateread-onlycurrent
cienaCesMplsStaticIngressTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.7IpAddressread-onlycurrent
cienaCesMplsStaticIngressTunnelLabel
OBJECT-TYPE
The label for the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.8INTEGER (0..1048575)read-onlycurrent
cienaCesMplsStaticIngressTunnelFrmCosPolicy
OBJECT-TYPE
Frame CoS policy of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.9FCosPolicyread-onlydeprecated
cienaCesMplsStaticIngressTunnelFrmCosMapId
OBJECT-TYPE
The frame CoS map ID of the static encap tunnel. This value is valid if the frame CoS policy selected for the static encap tunnel is rcos-mapped. This value corresponds to the index cienaCesTceDpTsCosMapFcosMapId of the cienaCesTceDpTsCosMapFcosMapTable.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.10INTEGER (1..65535)read-onlydeprecated
cienaCesMplsStaticIngressTunnelFixedExp
OBJECT-TYPE
This object is deprecated and the new object to provide this information is cienaCesMplsStaticIngressTunnelFixedTC in this table.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.11Unsigned32 (0..7)read-onlydeprecated
cienaCesMplsStaticIngressTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.12TTLPolicyread-onlycurrent
cienaCesMplsStaticIngressTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.13Unsigned32 (1..255)read-onlycurrent
cienaCesMplsStaticIngressTunnelGrpIndex
OBJECT-TYPE
The group ID of the tunnel group of which the static encap tunnel is a member.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.14Unsigned32read-onlycurrent
cienaCesMplsStaticIngressTunnelReversion
OBJECT-TYPE
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.16INTEGER {on(1), off(2)}read-onlycurrent
cienaCesMplsStaticIngressTunnelReversionTimeout
OBJECT-TYPE
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.17INTEGER (1..65535)read-onlycurrent
cienaCesMplsStaticIngressTunnelPrimaryTunnelName
OBJECT-TYPE
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.18DisplayStringread-onlydeprecated
cienaCesMplsStaticIngressTunnelFixedTC
OBJECT-TYPE
If the frame CoS policy for the static encap tunnel is fixed, this value is used for MPLS encapsulation.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.19Unsigned32 (0..7)read-onlydeprecated
cienaCesMplsStaticIngressTunnelProtectionRole
OBJECT-TYPE
specifies the protection role of the static encap tunnel
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.20INTEGER {none(0), primary(1), backup(2)}read-onlycurrent
cienaCesMplsStaticIngressTunnelProtectionState
OBJECT-TYPE
specifies the protection status of the static encap tunnel
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.21INTEGER {standby(0), active(1)}read-onlycurrent
cienaCesMplsStaticIngressTunnelProtectionPartnerName
OBJECT-TYPE
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.22DisplayStringread-onlycurrent
cienaCesMplsStaticIngressTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.23INTEGER (1..65535)read-onlycurrent
cienaCesMplsStaticIngressTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.24DisplayStringread-onlycurrent
cienaCesMplsStaticIngressTunnelRecoveryDisjoint
OBJECT-TYPE
Specifies the type of Recovery Disjoint
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.25INTEGER {none(1), link(2), node(3), srlg(4), unknown(5)}read-onlycurrent
cienaCesMplsDynamicIngressTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS encap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.1.3not-accessiblecurrent
cienaCesMplsDynamicIngressTunnelEntry
OBJECT-TYPE
An entry in the dynamic encap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1not-accessiblecurrent
cienaCesMplsDynamicIngressTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesMplsDynamicIngressTunnelName
OBJECT-TYPE
This represents the dynamic encap tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsDynamicIngressTunnelWeight
OBJECT-TYPE
A parameter to select the order of precedence of encap tunnels during tunnel switchover or reversion (if tunnel reversion is enabled). A higher weight indicates higher preference during switchover or reversion.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.3INTEGER (1..8)read-onlycurrent
cienaCesMplsDynamicIngressTunnelLspId
OBJECT-TYPE
A unique index within a tunnel group.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.4Unsigned32read-onlycurrent
cienaCesMplsDynamicIngressTunnelNextHopIp
OBJECT-TYPE
Specifies the next hop IP address for the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.5IpAddressread-onlycurrent
cienaCesMplsDynamicIngressTunnelAdminState
OBJECT-TYPE
Specifies the administrative status of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.6CienaGlobalStateread-onlycurrent
cienaCesMplsDynamicIngressTunnelOperState
OBJECT-TYPE
Specifies the operational status of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.7CienaGlobalStateread-onlycurrent
cienaCesMplsDynamicIngressTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the dynamic encap tunnel. If not specified, the dynamic encap tunnel inherits the IP address of the tunnel group. This object cannot be modified once the dynamic encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8IpAddressread-onlycurrent
cienaCesMplsDynamicIngressTunnelLabel
OBJECT-TYPE
Label for the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.9INTEGER (-1..1048575)read-onlycurrent
cienaCesMplsDynamicIngressTunnelFrmCosPolicy
OBJECT-TYPE
Frame CoS policy of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.10INTEGER {fixed(1), rcos-mapped(2)}read-onlydeprecated
cienaCesMplsDynamicIngressTunnelFrmCosMapId
OBJECT-TYPE
The frame CoS map ID of the dynamic encap tunnel. This value is valid if the frame CoS policy selected for the dynamic encap tunnel is rcos-mapped. This value corresponds to the index cienaCesTceDpTsCosMapFcosMapId of the cienaCesTceDpTsCosMapFcosMapTable.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.11INTEGER (1..65535)read-onlydeprecated
cienaCesMplsDynamicIngressTunnelFixedExp
OBJECT-TYPE
This object is deprecated and the new object to provide this information is cienaCesMplsDynamicIngressTunnelFixedTC in this table.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.12Unsigned32 (0..7)read-onlydeprecated
cienaCesMplsDynamicIngressTunnelSetupPriority
OBJECT-TYPE
Indicates the set up priority of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.13Unsigned32 (0..7)read-onlycurrent
cienaCesMplsDynamicIngressTunnelHoldPriority
OBJECT-TYPE
Indicates the holding priority of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.14Unsigned32 (0..7)read-onlycurrent
cienaCesMplsDynamicIngressTunnelRecordRoute
OBJECT-TYPE
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.15INTEGER {on(1), off(2)}read-onlycurrent
cienaCesMplsDynamicIngressTunnelFastRoute
OBJECT-TYPE
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.16INTEGER {none(1), link-protect(2), node-protect(3)}read-onlycurrent
cienaCesMplsDynamicIngressTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.17INTEGER {fixed(1), inherit(2)}read-onlycurrent
cienaCesMplsDynamicIngressTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the dynamic encap tunnel is fixed, this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.18Unsigned32 (1..255)read-onlycurrent
cienaCesMplsDynamicIngressTunnelPathIndex
OBJECT-TYPE
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.19Unsigned32read-onlycurrent
cienaCesMplsDynamicIngressTunnelPathName
OBJECT-TYPE
The path name corresponding to the pathIndex object.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.20DisplayStringread-onlycurrent
cienaCesMplsDynamicIngressTunnelGrpIndex
OBJECT-TYPE
The group id of the tunnel group of which the dynamic encap tunnel is a member.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.21Unsigned32read-onlycurrent
cienaCesMplsDynamicIngressTunnelResourcePointer
OBJECT-TYPE
The OID must be one of the entries in mplsTunnelResourceTable.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.23RowPointerread-onlycurrent
cienaCesMplsDynamicIngressTunnelReversion
OBJECT-TYPE
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.24INTEGER {on(1), off(2)}read-onlycurrent
cienaCesMplsDynamicIngressTunnelReversionTimeout
OBJECT-TYPE
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25INTEGER (1..65535)read-onlycurrent
cienaCesMplsDynamicIngressTunnelBandwidthProfile
OBJECT-TYPE
This object represents the bandwidth profile attached to this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.26DisplayStringread-onlycurrent
cienaCesMplsDynamicIngressTunnelPrimaryTunnelName
OBJECT-TYPE
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.27DisplayStringread-onlydeprecated
cienaCesMplsDynamicIngressTunnelFixedTC
OBJECT-TYPE
If the frame CoS policy for the dynamic encap tunnel is fixed, this value is used for MPLS encapsulation.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.28Unsigned32 (0..7)read-onlydeprecated
cienaCesMplsDynamicIngressTunnelProtectionRole
OBJECT-TYPE
specifies the protection role of the static encap tunnel
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.29INTEGER {none(0), primary(1), backup(2)}read-onlycurrent
cienaCesMplsDynamicIngressTunnelProtectionState
OBJECT-TYPE
specifies the protection status of the static encap tunnel
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.30INTEGER {standby(0), active(1)}read-onlycurrent
cienaCesMplsDynamicIngressTunnelProtectionPartnerName
OBJECT-TYPE
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.31DisplayStringread-onlycurrent
cienaCesMplsDynamicIngressTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.32INTEGER (1..65535)read-onlycurrent
cienaCesMplsDynamicIngressTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.33DisplayStringread-onlycurrent
cienaCesMplsStaticEgressTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS decap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.1.4not-accessiblecurrent
cienaCesMplsStaticEgressTunnelEntry
OBJECT-TYPE
An entry in the static decap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.1.4.1not-accessiblecurrent
cienaCesMplsStaticEgressTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.1Unsigned32not-accessiblecurrent
cienaCesMplsStaticEgressTunnelName
OBJECT-TYPE
This represents the decap tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsStaticEgressTunnelAdminState
OBJECT-TYPE
Administrative status of the static decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.3CienaGlobalStateread-onlycurrent
cienaCesMplsStaticEgressTunnelOperState
OBJECT-TYPE
Indicates the operational status of the static decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.4CienaGlobalStateread-onlycurrent
cienaCesMplsStaticEgressTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.5IpAddressread-onlycurrent
cienaCesMplsStaticEgressTunnelLabel
OBJECT-TYPE
Indicates the label of the static decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.6Unsigned32 (0..1048575)read-onlycurrent
cienaCesMplsDynamicEgressTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS dynamic decap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.1.5not-accessiblecurrent
cienaCesMplsDynamicEgressTunnelEntry
OBJECT-TYPE
An entry in the dynamic decap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.1.5.1not-accessiblecurrent
cienaCesMplsDynamicEgressTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.1Unsigned32not-accessiblecurrent
cienaCesMplsDynamicEgressTunnelName
OBJECT-TYPE
This represents the dynamic decap tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.2DisplayString (SIZE(1..32))read-onlycurrent
cienaCesMplsDynamicEgressTunnelAdminState
OBJECT-TYPE
Indicates the administrative status of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.3CienaGlobalStateread-onlycurrent
cienaCesMplsDynamicEgressTunnelOperState
OBJECT-TYPE
Indicates the operational status of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.4CienaGlobalStateread-onlycurrent
cienaCesMplsDynamicEgressTunnelInstance
OBJECT-TYPE
Indicates the LSP ID.
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.5Unsigned32read-onlycurrent
cienaCesMplsDynamicEgressTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.6IpAddressread-onlycurrent
cienaCesMplsDynamicEgressTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.7IpAddressread-onlycurrent
cienaCesMplsDynamicEgressTunnelLabel
OBJECT-TYPE
Idicates the label of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.8Unsigned32read-onlycurrent
cienaCesMplsStaticTransitTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS static transit tunnels.
1.3.6.1.4.1.1271.2.1.18.1.1.6not-accessiblecurrent
cienaCesMplsStaticTransitTunnelEntry
OBJECT-TYPE
An entry in the static transit tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1not-accessiblecurrent
cienaCesMplsStaticTransitTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.1Unsigned32not-accessiblecurrent
cienaCesMplsStaticTransitTunnelName
OBJECT-TYPE
This represents the static transit tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.2DisplayString (SIZE(1..32))read-onlycurrent
cienaCesMplsStaticTransitTunnelAdminState
OBJECT-TYPE
Indicates the administrative status of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.3CienaGlobalStateread-onlycurrent
cienaCesMplsStaticTransitTunnelOperState
OBJECT-TYPE
Indicates the operational status of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.4CienaGlobalStateread-onlycurrent
cienaCesMplsStaticTransitTunnelNextHopIpAddr
OBJECT-TYPE
Next hop IP address of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.5IpAddressread-onlycurrent
cienaCesMplsStaticTransitTunnelInLabel
OBJECT-TYPE
Indicates the incoming label of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.6INTEGER (0..1048575)read-onlycurrent
cienaCesMplsStaticTransitTunnelOutLabel
OBJECT-TYPE
Indicates the outgoing label of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.7INTEGER (0..1048575)read-onlycurrent
cienaCesMplsStaticTransitTunnelFcosPolicy
OBJECT-TYPE
Frame CoS policy of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.8FCosPolicyread-onlydeprecated
cienaCesMplsStaticTransitTunnelFixedTc
OBJECT-TYPE
If frame CoS policy for the static transit tunnel is fixed, this value is used for MPLS encapsulation.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.9Unsigned32 (0..7)read-onlydeprecated
cienaCesMplsStaticTransitTunnelFrmCosMapId
OBJECT-TYPE
The frame CoS map ID of the static transit tunnel. This value is valid if the frame cos policy selected for the static transit tunnel is rcos-mapped.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.10INTEGER (1..65535)read-onlydeprecated
cienaCesMplsStaticTransitTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.11TTLPolicyread-onlycurrent
cienaCesMplsStaticTransitTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the static transit tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.12Unsigned32 (1..255)read-onlycurrent
cienaCesMplsStaticTransitTunnelRcosPolicy
OBJECT-TYPE
Resolved CoS policy of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.13FCosPolicyread-onlydeprecated
cienaCesMplsStaticTransitTunnelRCosMapId
OBJECT-TYPE
The resolved CoS map ID of the static transit tunnel. This value is valid if the resolved CoS policy selected for the static transit tunnel is rcos-mapped.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.14INTEGER (1..65535)read-onlydeprecated
cienaCesMplsStaticTransitTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.15INTEGER (1..65535)read-onlycurrent
cienaCesMplsStaticTransitTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.16DisplayStringread-onlycurrent
cienaCesMplsStaticTransitTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.17IpAddressread-onlycurrent
cienaCesMplsStaticTransitTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.18IpAddressread-onlycurrent
cienaCesMplsStaticTransitTunnelIncomingPackets
OBJECT-TYPE
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.19Unsigned32read-onlycurrent
cienaCesMplsStaticTransitTunnelOutgoingPackets
OBJECT-TYPE
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.20Unsigned32read-onlycurrent
cienaCesMplsStaticTransitTunnelIncomingBytes
OBJECT-TYPE
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.21Unsigned32read-onlycurrent
cienaCesMplsStaticTransitTunnelOutgoingBytes
OBJECT-TYPE
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.22Unsigned32read-onlycurrent
cienaCesMplsDynamicTransitTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS dynamic transit tunnels.
1.3.6.1.4.1.1271.2.1.18.1.1.7not-accessiblecurrent
cienaCesMplsDynamicTransitTunnelEntry
OBJECT-TYPE
An entry in the dynamic transit tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1not-accessiblecurrent
cienaCesMplsDynamicTransitTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.1Unsigned32not-accessiblecurrent
cienaCesMplsDynamicTransitTunnelName
OBJECT-TYPE
This represents the dynamic transit tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.2DisplayString (SIZE(1..32))read-onlycurrent
cienaCesMplsDynamicTransitTunnelAdminState
OBJECT-TYPE
Indicates the administrative status of the dynamic transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.3CienaGlobalStateread-onlycurrent
cienaCesMplsDynamicTransitTunnelOperState
OBJECT-TYPE
Indicates the operational status of the dynamic transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.4CienaGlobalStateread-onlycurrent
cienaCesMplsDynamicTransitTunnelInLabel
OBJECT-TYPE
Indicates the incoming label of the dynamic transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.5INTEGER (0..1048575)read-onlycurrent
cienaCesMplsDynamicTransitTunnelOutLabel
OBJECT-TYPE
Indicates the outgoing label of the dynamic transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.6INTEGER (0..1048575)read-onlycurrent
cienaCesMplsDynamicTransitTunnelNextHopIpAddr
OBJECT-TYPE
Next hop IP address of the Dynamic transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.7IpAddressread-onlycurrent
cienaCesMplsDynamicTransitTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.8IpAddressread-onlycurrent
cienaCesMplsDynamicTransitTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the static transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.9IpAddressread-onlycurrent
cienaCesMplsDynamicTransitTunnelIncomingPackets
OBJECT-TYPE
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.10Unsigned32read-onlycurrent
cienaCesMplsDynamicTransitTunnelOutgoingPackets
OBJECT-TYPE
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.11Unsigned32read-onlycurrent
cienaCesMplsDynamicTransitTunnelIncomingBytes
OBJECT-TYPE
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.12Unsigned32read-onlycurrent
cienaCesMplsDynamicTransitTunnelOutgoingBytes
OBJECT-TYPE
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.13Unsigned32read-onlycurrent
cienaCesMplsTunnelPath
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.1.8
cienaCesMplsTunnelPathTable
OBJECT-TYPE
The (conceptual) table listing the MPLS tunnel paths. To create an entry in the tunnel path table, cienaCesMplsTunnelPathName and cienaCesMplsTunnelPathRowStatus must both be specified.
1.3.6.1.4.1.1271.2.1.18.1.1.8.1not-accessiblecurrent
cienaCesMplsTunnelPathEntry
OBJECT-TYPE
An entry in the tunnel path table.
1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1not-accessiblecurrent
cienaCesMplsTunnelPathIndex
OBJECT-TYPE
A unique index in the path entry table.
1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.1Unsigned32not-accessiblecurrent
cienaCesMplsTunnelPathName
OBJECT-TYPE
Name associated with the path.
1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsTunnelPathUseCount
OBJECT-TYPE
Indicates the number of encap tunnels that are using this path.
1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.3Counter32read-onlycurrent
cienaCesMplsTunnelPathHopTable
OBJECT-TYPE
The (conceptual) table listing the MPLS tunnel path hop. To create an entry in the path-hop table, cienaCesMplsTunnelPathHopIpAddr and cienaCesMplsTunnelPathHopRowStatus must both be specified.
1.3.6.1.4.1.1271.2.1.18.1.1.8.2not-accessiblecurrent
cienaCesMplsTunnelPathHopEntry
OBJECT-TYPE
A tunnel hop entry.
1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1not-accessiblecurrent
cienaCesMplsTunnelPathHopIndex
OBJECT-TYPE
Unique index in the path hop table.
1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.1Unsigned32not-accessiblecurrent
cienaCesMplsTunnelPathHopIpAddr
OBJECT-TYPE
IP address associated with this hop. This object cannot be modified once the path hop is created.
1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.2IpAddressread-onlycurrent
cienaCesMplsTunnelPathHopType
OBJECT-TYPE
Indidcates the hop type of the path member. This object cannot be modified once the path hop is created.
1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.3INTEGER {strict(1), loose(2)}read-onlycurrent
cienaCesMplsEncapTunnelNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.1.9
cienaCesMplsNotifEncapTunnelTable
OBJECT-TYPE
Table of notification objects required for encap tunnel notification.
1.3.6.1.4.1.1271.2.1.18.1.1.9.1not-accessiblecurrent
cienaCesMplsNotifEncapTunnelEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesMplsNotifEncapTunnelTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1not-accessiblecurrent
cienaCesMplsNotifEncapTunnelIndex
OBJECT-TYPE
Tunnel index of the encap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesMplsNotifEncapTunnelType
OBJECT-TYPE
Encap tunnel type of the encap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.2INTEGER {static(1), dynamic(2), frr(3)}accessible-for-notifycurrent
cienaCesMplsNotifEncapTunnelName
OBJECT-TYPE
This represents the encap tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.3DisplayStringaccessible-for-notifycurrent
cienaCesMplsNotifEncapTunnelAdminState
OBJECT-TYPE
Administrative state of the encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.4CienaGlobalStateaccessible-for-notifycurrent
cienaCesMplsNotifEncapTunnelOperState
OBJECT-TYPE
Operational state of the encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.5CienaGlobalStateaccessible-for-notifycurrent
cienaCesMplsNotifEncapTunnelOamFaulted
OBJECT-TYPE
Indication if the tunnel has Oam fault.
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.6TunnelOamFaultaccessible-for-notifycurrent
cienaCesMplsNotifEncapTunnelFaultedNodeId
OBJECT-TYPE
IP address of the node with the AIS fault.
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.7IpAddressaccessible-for-notifycurrent
cienaCesMplsTransitTunnelNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.1.10
cienaCesMplsNotifTransitTunnelTable
OBJECT-TYPE
Table of notification objects required for transit tunnel notification.
1.3.6.1.4.1.1271.2.1.18.1.1.10.1not-accessiblecurrent
cienaCesMplsNotifTransitTunnelEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesMplsNotifTransitTunnelTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1not-accessiblecurrent
cienaCesMplsNotifTransitTunnelIndex
OBJECT-TYPE
Tunnel index of the transit tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesMplsNotifTransitTunnelType
OBJECT-TYPE
Transit tunnel type of the transit tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.2INTEGER {static(1), dynamic(2)}accessible-for-notifycurrent
cienaCesMplsNotifTransitTunnelName
OBJECT-TYPE
This represents the transit tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.3DisplayStringaccessible-for-notifycurrent
cienaCesMplsNotifTransitTunnelAdminState
OBJECT-TYPE
Administrative state of the transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.4CienaGlobalStateaccessible-for-notifycurrent
cienaCesMplsNotifTransitTunnelOperState
OBJECT-TYPE
Operational state of the transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.5CienaGlobalStateaccessible-for-notifycurrent
cienaCesMplsNotifTransitTunnelOamFaulted
OBJECT-TYPE
Indication if the tunnel has Oam fault.
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.6TunnelOamFaultaccessible-for-notifycurrent
cienaCesMplsEncapTunnelGrpNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.1.11
cienaCesMplsNotifEncapTunnelGrpTable
OBJECT-TYPE
Table of notification objects required for encap tunnel group notification.
1.3.6.1.4.1.1271.2.1.18.1.1.11.1not-accessiblecurrent
cienaCesMplsNotifEncapTunnelGrpEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesMplsNotifEncapTunnelGrpTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1not-accessiblecurrent
cienaCesMplsNotifEncapTunnelGrpIndex
OBJECT-TYPE
Tunnel group index of the encap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesMplsNotifEncapTunnelGrpName
OBJECT-TYPE
Tunnel group name of the encap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.2DisplayStringaccessible-for-notifycurrent
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlIndex
OBJECT-TYPE
Active Encap Tunnel index of the tunnel group associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.3Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlName
OBJECT-TYPE
Active Encap Tunnel name of the Tunnel group associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.4DisplayStringaccessible-for-notifycurrent
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlType
OBJECT-TYPE
Encap tunnel type of the encap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.5INTEGER {static(1), dynamic(2), frr(3)}accessible-for-notifycurrent
cienaCesMplsAssociatedTunnelTable
OBJECT-TYPE
The table listing the MPLS Associated tunnels.
1.3.6.1.4.1.1271.2.1.18.1.1.12not-accessiblecurrent
cienaCesMplsAssociatedTunnelEntry
OBJECT-TYPE
This represents an entry of the MPLS associated tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1not-accessiblecurrent
cienaCesMplsAssociatedTunnelIndex
OBJECT-TYPE
Unique index in the table. Specifies mpls associated tunnel index
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesMplsAssociatedTunnelName
OBJECT-TYPE
specifies mpls associated tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.2DisplayStringread-onlycurrent
cienaCesMplsAssociatedForwardTunnelName
OBJECT-TYPE
specifies associated forward tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.3DisplayStringread-onlycurrent
cienaCesMplsAssociatedForwardTunnelType
OBJECT-TYPE
specifies associated forward tunnel type.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.4DisplayStringread-onlycurrent
cienaCesMplsAssociatedReverseTunnelName
OBJECT-TYPE
specifies associated reverse tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.5DisplayStringread-onlycurrent
cienaCesMplsAssociatedReverseTunnelType
OBJECT-TYPE
specifies associated reverse tunnel type.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.6DisplayStringread-onlycurrent
cienaCesMplsAssociatedForwardTunnelDestIpAddr
OBJECT-TYPE
specifies associated mpls forward tunnel destination IP address
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.7IpAddressread-onlycurrent
cienaCesMplsAssociatedDynamicTunnelSrcIpAddr
OBJECT-TYPE
specifies associated mpls reverse tunnel source IP address.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.8IpAddressread-onlycurrent
cienaCesMplsAssociatedTunnelAdminState
OBJECT-TYPE
Administrative status of associated tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.9CienaGlobalStateread-onlycurrent
cienaCesMplsAssociatedTunnelOperState
OBJECT-TYPE
Operational status of associated tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.10CienaGlobalStateread-onlycurrent
cienaCesMplsAssociatedForwardTunnelOperState
OBJECT-TYPE
Operational status of associated forward tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.11CienaGlobalStateread-onlycurrent
cienaCesMplsAssociatedReverseTunnelOperState
OBJECT-TYPE
Operational status of associated reverse tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.12CienaGlobalStateread-onlycurrent
cienaCesMplsAssociatedProtectionRole
OBJECT-TYPE
specifies the protection role of the associated tunnel
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.13INTEGER {none(0), primary(1), backup(2)}read-onlycurrent
cienaCesMplsAssociatedProtectionState
OBJECT-TYPE
specifies the protection status of the associated tunnel
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.14INTEGER {standby(0), active(1)}read-onlycurrent
cienaCesMplsAssociatedTunnelProtectionPartnerName
OBJECT-TYPE
This object represents the tunnel name it is protecting
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.15DisplayStringread-onlycurrent
cienaCesMplsAssociatedBfdMonitoring
OBJECT-TYPE
Specifies status of BFD monitoring.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.16CienaGlobalStateread-onlycurrent
cienaCesMplsAssociatedBfdProfileName
OBJECT-TYPE
This object represent BFD profile name.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.17DisplayStringread-onlycurrent
cienaCesMplsAssociatedBfdSessionName
OBJECT-TYPE
Specifies BFD session name.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.18DisplayStringread-onlycurrent
cienaCesMplsAssociatedBfdSessionFaulted
OBJECT-TYPE
Indicates if BFD is faulted.
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.19INTEGERread-onlycurrent
cienaCesMplsAssociatedBfdProfileIndex
OBJECT-TYPE
This represents the BFD profile index in the BFD profile table configured for this associated tunnel
1.3.6.1.4.1.1271.2.1.18.1.1.12.1.20Unsigned32 (1..65535)read-onlycurrent
cienaCesMplsTunnelARHopTable
OBJECT-TYPE
The mplsTunnelARHopTable is used to indicate the hops for an MPLS tunnel defined in mplsTunnelTable, as reported by the MPLS signalling protocol. Thus at a transit LSR, this table (if the table is supported and if the signaling protocol is recording actual route information) contains the actual route of the whole tunnel. If the signaling protocol is not recording the actual route, this table MAY report the information from the mplsTunnelHopTable or the mplsTunnelCHopTable. Each row in this table is indexed by mplsTunnelARHopListIndex. Each row also has a secondary index mplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. Please note that since the information necessary to build entries within this table is not provided by some MPLS signalling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the MPLS signalling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read- only. Note also that the contencts of this table may change while it is being read because of re-routing activities. A network administrator may verify that the actual route read is consistent by reference to the mplsTunnelLastPathChange object.
1.3.6.1.4.1.1271.2.1.18.1.1.13not-accessiblecurrent
cienaCesMplsTunnelARHopEntry
OBJECT-TYPE
An entry in this table represents a tunnel hop. An entry is created by the agent for signaled ERLSP set up by an MPLS signalling protocol.
1.3.6.1.4.1.1271.2.1.18.1.1.13.1not-accessiblecurrent
cienaMplsTunnelARHopListIndex
OBJECT-TYPE
Primary index into this table identifying a particular recorded hop list.
1.3.6.1.4.1.1271.2.1.18.1.1.13.1.1Unsigned32not-accessiblecurrent
cienaMplsTunnelARHopIndex
OBJECT-TYPE
Secondary index into this table identifying the particular hop.
1.3.6.1.4.1.1271.2.1.18.1.1.13.1.2Unsigned32not-accessiblecurrent
cienaMplsTunnelARHopAddrType
OBJECT-TYPE
The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.
1.3.6.1.4.1.1271.2.1.18.1.1.13.1.3INTEGERread-onlycurrent
cienaMplsTunnelARHopIpAddr
OBJECT-TYPE
The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding mplsTunnelARHopAddrType. If mplsTunnelARHopAddrType is set to unnum(4), then this value contains the LSR Router ID of the unnumbered interface. Otherwise the agent SHOULD set this object to the zero-length string and the manager should ignore this object.
1.3.6.1.4.1.1271.2.1.18.1.1.13.1.4IpAddressread-onlycurrent
cienaMplsTunnelARHopAddrUnnum
OBJECT-TYPE
If mplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with mplsTunnelARHopIpAddr which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
1.3.6.1.4.1.1271.2.1.18.1.1.13.1.5Unsigned32read-onlycurrent
cienaMplsTunnelARHopLspId
OBJECT-TYPE
If mplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
1.3.6.1.4.1.1271.2.1.18.1.1.13.1.6Unsigned32read-onlycurrent
cienaCesMplsAssociatedTunnelNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.1.14
cienaCesMplsNotifAssociatedTunnelTable
OBJECT-TYPE
Table of notification objects required for associated tunnel notification.
1.3.6.1.4.1.1271.2.1.18.1.1.14.1not-accessiblecurrent
cienaCesMplsNotifAssociatedTunnelEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesMplsNotifAssociatedTunnelTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1not-accessiblecurrent
cienaCesMplsNotifAssociatedTunnelIndex
OBJECT-TYPE
Tunnel index of the associated tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesMplsNotifAssociatedTunnelType
OBJECT-TYPE
Associated tunnel type of the associated tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.2INTEGER {static(1), dynamic(2)}accessible-for-notifycurrent
cienaCesMplsNotifAssociatedTunnelName
OBJECT-TYPE
This represents the associated tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.3DisplayStringaccessible-for-notifycurrent
cienaCesMplsNotifAssociatedTunnelAdminState
OBJECT-TYPE
Administrative state of the associated tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.4CienaGlobalStateaccessible-for-notifycurrent
cienaCesMplsNotifAssociatedTunnelOperState
OBJECT-TYPE
Operational state of the associated tunnel.
1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.5CienaGlobalStateaccessible-for-notifycurrent
cienaCesMplsNotifAssociatedTunnelOamFaulted
OBJECT-TYPE
Indication if the tunnel has Oam fault.
1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.6TunnelOamFaultaccessible-for-notifycurrent
cienaCesMplsNotifAssociatedTunnelFaultedNodeId
OBJECT-TYPE
IP address of the node with the AIS fault.
1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.7IpAddressaccessible-for-notifycurrent
cienaCesMplsCacInterfaceNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.1.15
cienaCesMplsNotifCacInterfaceTable
OBJECT-TYPE
Table of notification objects required for CAC interface notification.
1.3.6.1.4.1.1271.2.1.18.1.1.15.1not-accessiblecurrent
cienaCesMplsNotifCacInterfaceEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesMplsNotifCACInterfaceTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1not-accessiblecurrent
cienaCesMplsNotifCacInterfaceIndex
OBJECT-TYPE
CAC entry index associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesMplsNotifCacInterfaceClassType
OBJECT-TYPE
CAC class type value of the associated interface associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.2Unsigned32 (0..7)accessible-for-notifycurrent
cienaCesMplsNotifCacInterfaceName
OBJECT-TYPE
This represents the associated interface name.
1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.3DisplayStringaccessible-for-notifycurrent
cienaCesMplsNotifCacInterfaceThreshold
OBJECT-TYPE
Alarm threshold value of the associated interface associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.4Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesMplsClassProfileTable
OBJECT-TYPE
The (conceptual) table listing the MPLS Class Profiles.
1.3.6.1.4.1.1271.2.1.18.1.1.16not-accessiblecurrent
cienaCesMplsClassProfileEntry
OBJECT-TYPE
This represents an entry for MPLS Class Profile.
1.3.6.1.4.1.1271.2.1.18.1.1.16.1not-accessiblecurrent
cienaCesMplsClassProfileIndex
OBJECT-TYPE
This represents the unique index for MPLS Class Profile.
1.3.6.1.4.1.1271.2.1.18.1.1.16.1.1Unsigned32 (1..500)not-accessiblecurrent
cienaCesMplsClassProfileName
OBJECT-TYPE
This represents the MPLS Class Profile name.
1.3.6.1.4.1.1271.2.1.18.1.1.16.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsClassProfileCacPolicy
OBJECT-TYPE
MPLS Class Profile Cac policy.
1.3.6.1.4.1.1271.2.1.18.1.1.16.1.3CacPolicyread-onlycurrent
cienaCesMplsTEClassTypeTable
OBJECT-TYPE
The (conceptual) table listing the MPLS Class Types.
1.3.6.1.4.1.1271.2.1.18.1.1.17not-accessiblecurrent
cienaCesMplsTEClassTypeEntry
OBJECT-TYPE
This represents an entry for MPLS Class Type.
1.3.6.1.4.1.1271.2.1.18.1.1.17.1not-accessiblecurrent
cienaCesMplsClassType
OBJECT-TYPE
Indicates the MPLS Class Type value. Used as an Index in combination with MPLS Class Profile Index.
1.3.6.1.4.1.1271.2.1.18.1.1.17.1.1Unsigned32 (0..7)not-accessiblecurrent
cienaCesMplsClassTypeQueueGroupIndex
OBJECT-TYPE
Indicates the queue group index associated with MPLS Class Type.
1.3.6.1.4.1.1271.2.1.18.1.1.17.1.2Unsigned32 (1..500)read-onlycurrent
cienaCesMplsClassTypeQueueGroupInstance
OBJECT-TYPE
Indicates the instance for MPLS Class Type mapped to a particular queue group.
1.3.6.1.4.1.1271.2.1.18.1.1.17.1.3Unsigned32 (1..65534)read-onlycurrent
cienaCesMplsClassTypeLom
OBJECT-TYPE
Indicates the link multiplier value for the MPLS Class Type.
1.3.6.1.4.1.1271.2.1.18.1.1.17.1.4Unsigned32 (1..4)read-onlycurrent
cienaCesMplsClassTypeAlarmThreshold
OBJECT-TYPE
Indicates the Alarm Threshold percentage (%) for MPLS Class Type.
1.3.6.1.4.1.1271.2.1.18.1.1.17.1.5Unsigned32 (0..100)read-onlycurrent
cienaCesGmpls
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.2
cienaCesGmplsStaticIngressUniDirTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS static encap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.1not-accessiblecurrent
cienaCesGmplsStaticIngressUniDirTunnelEntry
OBJECT-TYPE
This represents an entry of the MPLS static encap TP unidirectional tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1not-accessiblecurrent
cienaCesGmplsStaticIngressUniDirTunnelIndex
OBJECT-TYPE
Unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesGmplsStaticIngressUniDirTunnelName
OBJECT-TYPE
This represents the encap tunnel name. Tunnel names are common across static and dynamic.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelNextHopIp
OBJECT-TYPE
Specifies the next hop IP address for the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.3IpAddressread-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelSrcIpAddr
OBJECT-TYPE
Source IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.4IpAddressread-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.5IpAddressread-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelAdminState
OBJECT-TYPE
Specifies the administrative status of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.6CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelOperState
OBJECT-TYPE
Specifies the operational status of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.7CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelForwardOutLabel
OBJECT-TYPE
The label for the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.8Unsigned32read-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelProtectionRole
OBJECT-TYPE
The label for the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.9INTEGER {none(0), primary(1), backup(2)}read-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelProtectionPartnerName
OBJECT-TYPE
Protection partner name of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.10DisplayStringread-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelProtectionState
OBJECT-TYPE
Specifies the Protection status of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.11INTEGER {standby(0), active(1)}read-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.12TTLPolicyread-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.13Unsigned32 (1..255)read-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelGrpIndex
OBJECT-TYPE
The group ID of the tunnel group of which the static encap tunnel is a member.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.14Unsigned32read-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelReversion
OBJECT-TYPE
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.15INTEGER {on(1), off(2)}read-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelReversionTimeout
OBJECT-TYPE
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.16Unsigned32read-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.17INTEGER (1..65535)read-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.18DisplayStringread-onlycurrent
cienaCesGmplsStaticIngressUniDirTunnelRecoveryDisjoint
OBJECT-TYPE
Specifies the type of Recovery Disjoint
1.3.6.1.4.1.1271.2.1.18.1.2.1.1.19INTEGER {none(1), link(2), node(3), srlg(4), unknown(5)}read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS static encap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.2not-accessiblecurrent
cienaCesGmplsStaticIngressCoroutedTunnelEntry
OBJECT-TYPE
This represents an entry of the MPLS static encap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1not-accessiblecurrent
cienaCesGmplsStaticIngressCoroutedTunnelIndex
OBJECT-TYPE
Unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesGmplsStaticIngressCoroutedTunnelName
OBJECT-TYPE
This represents the encap tunnel name. Tunnel names are common across static and dynamic.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelNextHopIp
OBJECT-TYPE
Specifies the next hop IP address for the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.3IpAddressread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr
OBJECT-TYPE
Source IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.4IpAddressread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.5IpAddressread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelAdminState
OBJECT-TYPE
Specifies the administrative status of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.6CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelOperState
OBJECT-TYPE
Specifies the operational status of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.7CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelForwardOutLabel
OBJECT-TYPE
The label for the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.8Unsigned32read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelReverseInLabel
OBJECT-TYPE
The label for the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.9Unsigned32read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelProtectionRole
OBJECT-TYPE
The label for the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.10INTEGER {none(0), primary(1), backup(2)}read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelProtectionPartnerName
OBJECT-TYPE
Protection partner name of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.11DisplayStringread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelProtectionState
OBJECT-TYPE
Specifies the Protection status of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.12INTEGER {standby(0), active(1)}read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.13TTLPolicyread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.14Unsigned32 (1..255)read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelGrpIndex
OBJECT-TYPE
The group ID of the tunnel group of which the static encap tunnel is a member.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.15Unsigned32read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelReversion
OBJECT-TYPE
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.16INTEGER {on(1), off(2)}read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelReversionTimeout
OBJECT-TYPE
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.17Unsigned32read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.18INTEGER (1..65535)read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.19DisplayStringread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelBfdMonitoring
OBJECT-TYPE
Specifies status of BFD monitoring.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.20CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileName
OBJECT-TYPE
This object represent BFD profile name.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.21DisplayStringread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionName
OBJECT-TYPE
Specifies BFD session name.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.22DisplayStringread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelAisMonitoring
OBJECT-TYPE
Specifies status of AIS monitoring.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.23CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelAisProfileName
OBJECT-TYPE
This object represent AIS profile name.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.24DisplayStringread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionFaulted
OBJECT-TYPE
Indicates if BFD is faulted.
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.25INTEGERread-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileIndex
OBJECT-TYPE
This represents the BFD profile index in the BFD profile table configured for this gmpls static ingress corouted tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.26Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelRecoveryDisjoint
OBJECT-TYPE
Specifies the type of Recovery Disjoint
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.27INTEGER {none(1), link(2), node(3), srlg(4), unknown(5)}read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelNextHopIfNum
OBJECT-TYPE
This represents next hop interface number for this gmpls static ingress corouted tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.28Unsigned32read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelLspId
OBJECT-TYPE
This represents LSP ID for this gmpls static ingress corouted tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.29Unsigned32read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelSrcTunnelId
OBJECT-TYPE
This represents source tunnel ID for this gmpls static ingress corouted tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.30Unsigned32read-onlycurrent
cienaCesGmplsStaticIngressCoroutedTunnelDestTunnelId
OBJECT-TYPE
This represents destination tunnel ID for this gmpls static ingress corouted tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.2.1.31Unsigned32read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS Dynamic encap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.3not-accessiblecurrent
cienaCesGmplsDynamicIngressUniDirTunnelEntry
OBJECT-TYPE
This represents an entry of the MPLS Dynamic encap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1not-accessiblecurrent
cienaCesGmplsDynamicIngressUniDirTunnelIndex
OBJECT-TYPE
Unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesGmplsDynamicIngressUniDirTunnelName
OBJECT-TYPE
This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsDynamicIngressUniDirTunnelLspId
OBJECT-TYPE
A unique index within a tunnel group.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.3Unsigned32read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp
OBJECT-TYPE
Specifies the next hop IP address for the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.4IpAddressread-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelSrcIpAddr
OBJECT-TYPE
Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.5IpAddressread-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.6IpAddressread-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelAdminState
OBJECT-TYPE
Specifies the administrative status of the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.7CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelOperState
OBJECT-TYPE
Specifies the operational status of the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.8CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelForwardOutLabel
OBJECT-TYPE
The label for the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.9Unsigned32read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelProtectionRole
OBJECT-TYPE
The label for the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.10INTEGER {none(0), primary(1), backup(2)}read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelProtectionPartnerName
OBJECT-TYPE
Protection partner name of the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.11DisplayStringread-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelProtectionState
OBJECT-TYPE
Specifies the Protection status of the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.12INTEGER {standby(0), active(1)}read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.13TTLPolicyread-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.14Unsigned32 (1..255)read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelGrpIndex
OBJECT-TYPE
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.15Unsigned32read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelReversion
OBJECT-TYPE
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.16INTEGER {on(1), off(2)}read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelReversionTimeout
OBJECT-TYPE
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.17Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.18Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.19DisplayStringread-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelRecordRoute
OBJECT-TYPE
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.20INTEGER {on(1), off(2)}read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelFastRoute
OBJECT-TYPE
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.21INTEGER {none(1), link-protect(2), node-protect(3)}read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelSetupPriority
OBJECT-TYPE
Indicates the set up priority of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.22Unsigned32 (0..7)read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelHoldPriority
OBJECT-TYPE
Indicates the holding priority of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.23Unsigned32 (0..7)read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelPathIndex
OBJECT-TYPE
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.24Unsigned32read-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelPathName
OBJECT-TYPE
The path name corresponding to the pathIndex object.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.25DisplayStringread-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile
OBJECT-TYPE
This object represents the bandwidth profile attached to this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.26DisplayStringread-onlycurrent
cienaCesGmplsDynamicIngressUniDirTunnelResourcePointer
OBJECT-TYPE
The OID must be one of the entries in mplsTunnelResourceTable.
1.3.6.1.4.1.1271.2.1.18.1.2.3.1.27RowPointerread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS Dynamic encap co-routed tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.4not-accessiblecurrent
cienaCesGmplsDynamicIngressCoroutedTunnelEntry
OBJECT-TYPE
This represents an entry of the MPLS Dynamic encap co-routed tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1not-accessiblecurrent
cienaCesGmplsDynamicIngressCoroutedTunnelIndex
OBJECT-TYPE
Unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesGmplsDynamicIngressCoroutedTunnelName
OBJECT-TYPE
This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelNextHopIp
OBJECT-TYPE
Specifies the next hop IP address for the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.3IpAddressread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelSrcIpAddr
OBJECT-TYPE
Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.4IpAddressread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.5IpAddressread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelAdminState
OBJECT-TYPE
Specifies the administrative status of the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.6CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelOperState
OBJECT-TYPE
Specifies the operational status of the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.7CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelForwardOutLabel
OBJECT-TYPE
The label for the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.8Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelReverseInLabel
OBJECT-TYPE
The label for the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.9Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionRole
OBJECT-TYPE
The label for the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.10INTEGER {none(0), primary(1), backup(2)}read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionPartnerName
OBJECT-TYPE
Protection partner name of the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.11DisplayStringread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionState
OBJECT-TYPE
Specifies the Protection status of the Dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.12INTEGER {standby(0), active(1)}read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.13TTLPolicyread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.14Unsigned32 (1..255)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelGrpIndex
OBJECT-TYPE
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.15Unsigned32read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelReversion
OBJECT-TYPE
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.16INTEGER {on(1), off(2)}read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelReversionTimeout
OBJECT-TYPE
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.17Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.18Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.19DisplayStringread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelRecordRoute
OBJECT-TYPE
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.20INTEGER {on(1), off(2)}read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelFastRoute
OBJECT-TYPE
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.21INTEGER {none(1), link-protect(2), node-protect(3)}read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority
OBJECT-TYPE
Indicates the set up priority of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22Unsigned32 (0..7)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelHoldPriority
OBJECT-TYPE
Indicates the holding priority of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.23Unsigned32 (0..7)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelPathIndex
OBJECT-TYPE
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.24Unsigned32read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelPathName
OBJECT-TYPE
The path name corresponding to the pathIndex object.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.25DisplayStringread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelBandwidthProfile
OBJECT-TYPE
This object represents the bandwidth profile attached to this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.26DisplayStringread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelResourcePointer
OBJECT-TYPE
The OID must be one of the entries in mplsTunnelResourceTable.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.27RowPointerread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelBfdMonitoring
OBJECT-TYPE
Specifies status of BFD monitoring.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.28CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileName
OBJECT-TYPE
This object represent BFD profile name.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.29DisplayStringread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionName
OBJECT-TYPE
Specifies BFD session name.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.30DisplayStringread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionFaulted
OBJECT-TYPE
Indicates if BFD is faulted.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.31INTEGERread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileIndex
OBJECT-TYPE
This represents the BFD profile index in the BFD profile table configured for this gmpls dynamic ingress corouted tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.32Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelAutoBackupEnable
OBJECT-TYPE
Indicates if auto-backup is enabled for this tunnel and always remains 0 in case of backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.33INTEGERread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelLspReoptimization
OBJECT-TYPE
Indicates if Lsp-Reoptimization is enabled or disabled for this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.34MplsGlobalStateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval
OBJECT-TYPE
Indicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35Unsigned32 (5..60)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointType
OBJECT-TYPE
Indicates path diversification criteria used for this tunnel. It can either be node based or srlg based or link based or combination.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.36PathDisjointTyperead-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointMode
OBJECT-TYPE
Indicates mode used for path diversification for this tunnel .
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.37PathDisjointModeread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeEnable
OBJECT-TYPE
Indicates if auto-size is enabled for this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.38MplsGlobalStateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeInterval
OBJECT-TYPE
Indicates auto-sizing interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.39Unsigned32 (5..60)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeFailureHdlr
OBJECT-TYPE
Indicates auto-sizing failure handler for this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.40AutoSizeFailHdlrread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeState
OBJECT-TYPE
Indicates dynamic auto-sizing states for this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.41AutoSizeStateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeMode
OBJECT-TYPE
Indicates auto-sizing mode for this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.42AutoSizeModeread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelMinBandwidth
OBJECT-TYPE
Indicates auto-size minimum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.43MplsBitRateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelMaxBandwidth
OBJECT-TYPE
Indicates auto-size maximum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.44MplsBitRateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelIncBandwidth
OBJECT-TYPE
Indicates auto-size increment bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.45MplsBitRateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelCurBandwidth
OBJECT-TYPE
Indicates auto-size current bandwidth(in kbps) for this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.46MplsBitRateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelReqBandwidth
OBJECT-TYPE
Indicates auto-size requested bandwidth(in kbps) for this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.47MplsBitRateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelUsedBandwidth
OBJECT-TYPE
Indicates auto-size used bandwidth(in kbps) for this tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.48MplsBitRateread-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelClassType
OBJECT-TYPE
Indicates the DSTE class type (CT0-CT7) mapped to this Tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.49Unsigned32 (0..7)read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAll
OBJECT-TYPE
Resource affinity Admin Color-Group which is applied in include-all colors mode to constrain path selection and always remains 0 in case of backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.50Unsigned32read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAny
OBJECT-TYPE
Resource affinity Admin Color-Group which is applied in include-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.51Unsigned32read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedTunnelResourceExcludeAny
OBJECT-TYPE
Resource affinity Admin Color-Group which is applied in exclude-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.52Unsigned32read-onlycurrent
cienaCesGmplsDynamicIngressCoroutedLspId
OBJECT-TYPE
Indicates the Ingress LSP ID.
1.3.6.1.4.1.1271.2.1.18.1.2.4.1.53Unsigned32read-onlycurrent
cienaCesGmplsStaticEgressUniDirTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS decap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.5not-accessiblecurrent
cienaCesGmplsStaticEgressUniDirTunnelEntry
OBJECT-TYPE
An entry in the static decap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.5.1not-accessiblecurrent
cienaCesGmplsStaticEgressUniDirTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.5.1.1Unsigned32not-accessiblecurrent
cienaCesGmplsStaticEgressUniDirTunnelName
OBJECT-TYPE
This represents the decap tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.5.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesGmplsStaticEgressUniDirTunnelAdminState
OBJECT-TYPE
Administrative status of the static decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.5.1.3CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticEgressUniDirTunnelOperState
OBJECT-TYPE
Indicates the operational status of the static decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.5.1.4CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticEgressUniDirTunnelPrevHopIpAddr
OBJECT-TYPE
Prev hop IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.5.1.5IpAddressread-onlycurrent
cienaCesGmplsStaticEgressUniDirTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.5.1.6IpAddressread-onlycurrent
cienaCesGmplsStaticEgressUniDirTunnelDestIpAddr
OBJECT-TYPE
destination IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.5.1.7IpAddressread-onlycurrent
cienaCesGmplsStaticEgressUniDirTunnelForwardInLabel
OBJECT-TYPE
Indicates the label of the static decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.5.1.8Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS decap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.6not-accessiblecurrent
cienaCesGmplsStaticEgressCoroutedTunnelEntry
OBJECT-TYPE
An entry in the static decap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1not-accessiblecurrent
cienaCesGmplsStaticEgressCoroutedTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.1Unsigned32not-accessiblecurrent
cienaCesGmplsStaticEgressCoroutedTunnelName
OBJECT-TYPE
This represents the decap tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelAdminState
OBJECT-TYPE
Administrative status of the static decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.3CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelOperState
OBJECT-TYPE
Indicates the operational status of the static decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.4CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelPrevHopIpAddr
OBJECT-TYPE
Prev hop IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.5IpAddressread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.6IpAddressread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelDestIpAddr
OBJECT-TYPE
destination IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.7IpAddressread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelForwardInLabel
OBJECT-TYPE
Indicates the in label of the static decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.8Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelReverseOutLabel
OBJECT-TYPE
Indicates the out label of the static decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.9Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelProtectionRole
OBJECT-TYPE
specifies protection tunnel role.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.10INTEGER {none(0), primary(1), backup(2)}read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelProtectionPartnerName
OBJECT-TYPE
Protection partner name of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.11DisplayStringread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelProtectionState
OBJECT-TYPE
Specifies the Protection status of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.12INTEGER {standby(0), active(1)}read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelGrpIndex
OBJECT-TYPE
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.13Unsigned32read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelReversion
OBJECT-TYPE
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.14INTEGER {on(1), off(2)}read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelReversionTimeout
OBJECT-TYPE
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.15Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.16Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.17DisplayStringread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelBfdMonitoring
OBJECT-TYPE
Specifies status of BFD monitoring.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.18CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelBfdProfileName
OBJECT-TYPE
This object represent BFD profile name.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.19DisplayStringread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelBfdSessionName
OBJECT-TYPE
Specifies BFD session name.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.20DisplayStringread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelAisMonitoring
OBJECT-TYPE
Specifies status of AIS monitoring.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.21CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelAisProfileName
OBJECT-TYPE
This object represent AIS profile name.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.22DisplayStringread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelBfdSessionFaulted
OBJECT-TYPE
Indicates if BFD is faulted.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.23INTEGERread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelBfdProfileIndex
OBJECT-TYPE
This represents the BFD profile index in the BFD profile table configured for this gmpls static egress corouted tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.24Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelRecoveryDisjoint
OBJECT-TYPE
Specifies the type of Recovery Disjoint
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.25INTEGER {none(1), link(2), node(3), srlg(4), unknown(5)}read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.26TTLPolicyread-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.27Unsigned32 (1..255)read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelPrevHopIfNum
OBJECT-TYPE
This represents previous hop interface number for this gmpls static egress corouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.28Unsigned32read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelLspId
OBJECT-TYPE
This represents LSP ID for this gmpls static egress corouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.29Unsigned32read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelSrcTunnelId
OBJECT-TYPE
This represents source tunnel ID for this gmpls static egress corouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.30Unsigned32read-onlycurrent
cienaCesGmplsStaticEgressCoroutedTunnelDestTunnelId
OBJECT-TYPE
This represents source tunnel ID for this gmpls static egress corouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.6.1.31Unsigned32read-onlycurrent
cienaCesGmplsDynamicEgressUniDirTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS dynamic decap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.7not-accessiblecurrent
cienaCesGmplsDynamicEgressUniDirTunnelEntry
OBJECT-TYPE
An entry in the dynamic decap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.7.1not-accessiblecurrent
cienaCesGmplsDynamicEgressUniDirTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.7.1.1Unsigned32not-accessiblecurrent
cienaCesGmplsDynamicEgressUniDirTunnelName
OBJECT-TYPE
This represents the dynamic decap tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.7.1.2DisplayString (SIZE(1..32))read-onlycurrent
cienaCesGmplsDynamicEgressUniDirTunnelAdminState
OBJECT-TYPE
Indicates the administrative status of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.7.1.3CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicEgressUniDirTunnelOperState
OBJECT-TYPE
Indicates the operational status of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.7.1.4CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicEgressUniDirLspId
OBJECT-TYPE
Indicates the LSP ID.
1.3.6.1.4.1.1271.2.1.18.1.2.7.1.5Unsigned32read-onlycurrent
cienaCesGmplsDynamicEgressUniDirTunnelPrevHopIpAddr
OBJECT-TYPE
Source IP address of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.7.1.6IpAddressread-onlycurrent
cienaCesGmplsDynamicEgressUniDirTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.7.1.7IpAddressread-onlycurrent
cienaCesGmplsDynamicEgressUniDirTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.7.1.8IpAddressread-onlycurrent
cienaCesGmplsDynamicEgressUniDirTunnelForwardInLabel
OBJECT-TYPE
Idicates the label of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.7.1.9Unsigned32read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS dynamic decap tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.8not-accessiblecurrent
cienaCesGmplsDynamicEgressCoroutedTunnelEntry
OBJECT-TYPE
An entry in the dynamic decap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1not-accessiblecurrent
cienaCesGmplsDynamicEgressCoroutedTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.1Unsigned32not-accessiblecurrent
cienaCesGmplsDynamicEgressCoroutedTunnelName
OBJECT-TYPE
This represents the dynamic decap tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.2DisplayString (SIZE(1..32))read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelAdminState
OBJECT-TYPE
Indicates the administrative status of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.3CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelOperState
OBJECT-TYPE
Indicates the operational status of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.4CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedLspId
OBJECT-TYPE
Indicates the LSP ID.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.5Unsigned32read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelPrevHopIpAddr
OBJECT-TYPE
Prev hop IP address of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.6IpAddressread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.7IpAddressread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.8IpAddressread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelForwardInLabel
OBJECT-TYPE
Idicates the label of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.9Unsigned32read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelReverseOutLabel
OBJECT-TYPE
Indicates the out label of the dynamic decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.10Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelProtectionRole
OBJECT-TYPE
specifies role of this dynamic tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.11INTEGER {none(0), primary(1), backup(2)}read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelProtectionPartnerName
OBJECT-TYPE
Protection partner name of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.12DisplayStringread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelProtectionState
OBJECT-TYPE
Specifies the Protection status of the static encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.13INTEGER {standby(0), active(1)}read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelGrpIndex
OBJECT-TYPE
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.14Unsigned32read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelReversion
OBJECT-TYPE
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.15INTEGER {on(1), off(2)}read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout
OBJECT-TYPE
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.16Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.17Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.18DisplayStringread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelBfdMonitoring
OBJECT-TYPE
This parameter indicates if BFD monitoring is enabled or disableb on tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.19CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelBfdProfileName
OBJECT-TYPE
It Indicates assigned BFD profile names to tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.20DisplayStringread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelBfdSessionName
OBJECT-TYPE
It Indicates BFD session names.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.21DisplayStringread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelBfdSessionFaulted
OBJECT-TYPE
Specifies if BFD faulted
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.22INTEGERread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelBfdProfileIndex
OBJECT-TYPE
This represents the BFD profile index in the BFD profile table configured for this gmpls dynamic egress corouted tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.23Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.24TTLPolicyread-onlycurrent
cienaCesGmplsDynamicEgressCoroutedTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.2.8.1.25Unsigned32 (1..255)read-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS static TransitUniDir tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.9not-accessiblecurrent
cienaCesGmplsStaticTransitUniDirTunnelEntry
OBJECT-TYPE
An entry in the static TransitUniDir tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1not-accessiblecurrent
cienaCesGmplsStaticTransitUniDirTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.1Unsigned32not-accessiblecurrent
cienaCesGmplsStaticTransitUniDirTunnelName
OBJECT-TYPE
This represents the static TransitUniDir tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.2DisplayString (SIZE(1..32))read-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelAdminState
OBJECT-TYPE
Indicates the administrative status of the static TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.3CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelOperState
OBJECT-TYPE
Indicates the operational status of the static TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.4CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the static TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.5IpAddressread-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the static TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.6IpAddressread-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelNextHopIpAddr
OBJECT-TYPE
Next hop IP address of the static TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.7IpAddressread-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelPrevHopIpAddr
OBJECT-TYPE
Previous hop IP address of the static TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.8IpAddressread-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelForwardInLabel
OBJECT-TYPE
Indicates the incoming label of the static TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.9Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelForwardOutLabel
OBJECT-TYPE
Indicates the outgoing label of the static TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.10Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.11TTLPolicyread-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the static TransitUniDir tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.12Unsigned32 (1..255)read-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.13Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.14DisplayStringread-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelAisMonitoring
OBJECT-TYPE
Specifies AIS monitoring's status.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.15CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelAisProfileName
OBJECT-TYPE
This object contais AIS profile name.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.16DisplayStringread-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelIncomingPackets
OBJECT-TYPE
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.17Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelOutgoingPackets
OBJECT-TYPE
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.18Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelIncomingBytes
OBJECT-TYPE
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.19Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitUniDirTunnelOutgoingBytes
OBJECT-TYPE
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.9.1.20Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS static TransitCorouted tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.10not-accessiblecurrent
cienaCesGmplsStaticTransitCoroutedTunnelEntry
OBJECT-TYPE
An entry in the static TransitCorouted tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1not-accessiblecurrent
cienaCesGmplsStaticTransitCoroutedTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.1Unsigned32not-accessiblecurrent
cienaCesGmplsStaticTransitCoroutedTunnelName
OBJECT-TYPE
This represents the static TransitCorouted tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.2DisplayString (SIZE(1..32))read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelAdminState
OBJECT-TYPE
Indicates the administrative status of the static TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.3CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelOperState
OBJECT-TYPE
Indicates the operational status of the static TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.4CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the static TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.5IpAddressread-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the static TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.6IpAddressread-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelNextHopIpAddr
OBJECT-TYPE
Next hop IP address of the static TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.7IpAddressread-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelPrevHopIpAddr
OBJECT-TYPE
Previous hop IP address of the static TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.8IpAddressread-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelForwardInLabel
OBJECT-TYPE
Indicates the incoming label of the static TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.9Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelForwardOutLabel
OBJECT-TYPE
Indicates the outgoing label of the static TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.10Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelReverseInLabel
OBJECT-TYPE
Indicates the incoming label of the static TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.11Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelReverseOutLabel
OBJECT-TYPE
Indicates the outgoing label of the static TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.12Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.13TTLPolicyread-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the static TransitCorouted tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.14Unsigned32 (1..255)read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelCosProfileIndex
OBJECT-TYPE
This object represents Cos profile index
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.15Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelCosProfileName
OBJECT-TYPE
Specifies the name of Cos profile
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.16DisplayStringread-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelAisMonitoring
OBJECT-TYPE
specifies AIS monitoring.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.17CienaGlobalStateread-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelAisProfileName
OBJECT-TYPE
This object contains AIS profile name
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.18DisplayStringread-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelPrevHopIfNum
OBJECT-TYPE
This represents previous hop interface number for this gmpls transit corouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.19Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelNextHopIfNum
OBJECT-TYPE
This represents next hop interface number for this gmpls transit corouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.20Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelLspId
OBJECT-TYPE
This represents LSP ID for this gmpls transit corouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.21Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelSrcTunnelId
OBJECT-TYPE
This represents source tunnel ID for this gmpls transit corouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.22Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelDestTunnelId
OBJECT-TYPE
This represents destination tunnel ID for this gmpls transit corouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.23Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelIncomingPackets
OBJECT-TYPE
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.24Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelOutgoingPackets
OBJECT-TYPE
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.25Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelIncomingBytes
OBJECT-TYPE
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.26Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelOutgoingBytes
OBJECT-TYPE
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.27Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelReverseIncomingPackets
OBJECT-TYPE
The number of reverse direction incoming packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.28Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelReverseOutgoingPackets
OBJECT-TYPE
The number of reverse direction outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.29Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelReverseIncomingBytes
OBJECT-TYPE
The number of reverse direction incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.30Unsigned32read-onlycurrent
cienaCesGmplsStaticTransitCoroutedTunnelReverseOutgoingBytes
OBJECT-TYPE
The number of reverse direction outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.10.1.31Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS Dynamic TransitUniDir tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.11not-accessiblecurrent
cienaCesGmplsDynamicTransitUniDirTunnelEntry
OBJECT-TYPE
An entry in the Dynamic TransitUniDir tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1not-accessiblecurrent
cienaCesGmplsDynamicTransitUniDirTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.1Unsigned32not-accessiblecurrent
cienaCesGmplsDynamicTransitUniDirTunnelName
OBJECT-TYPE
This represents the Dynamic TransitUniDir tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.2DisplayString (SIZE(1..32))read-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelAdminState
OBJECT-TYPE
Indicates the administrative status of the Dynamic TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.3CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelOperState
OBJECT-TYPE
Indicates the operational status of the Dynamic TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.4CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the Dynamic TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.5IpAddressread-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the Dynamic TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.6IpAddressread-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelNextHopIpAddr
OBJECT-TYPE
Next hop IP address of the Dynamic TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.7IpAddressread-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelForwardInLabel
OBJECT-TYPE
Indicates the incoming label of the Dynamic TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.8Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelForwardOutLabel
OBJECT-TYPE
Indicates the outgoing label of the Dynamic TransitUniDir tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.9Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.10TTLPolicyread-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the Dynamic TransitUniDir tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.11Unsigned32 (1..255)read-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelIncomingPackets
OBJECT-TYPE
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.12Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelOutgoingPackets
OBJECT-TYPE
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.13Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelIncomingBytes
OBJECT-TYPE
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.14Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitUniDirTunnelOutgoingBytes
OBJECT-TYPE
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.11.1.15Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelTable
OBJECT-TYPE
The (conceptual) table listing the MPLS Dynamic TransitCoRouted tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.12not-accessiblecurrent
cienaCesGmplsDynamicTransitCoroutedTunnelEntry
OBJECT-TYPE
An entry in the Dynamic TransitCorouted tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1not-accessiblecurrent
cienaCesGmplsDynamicTransitCoroutedTunnelIndex
OBJECT-TYPE
This represents the unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.1Unsigned32not-accessiblecurrent
cienaCesGmplsDynamicTransitCoroutedTunnelName
OBJECT-TYPE
This represents the Dynamic TransitCorouted tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.2DisplayString (SIZE(1..32))read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelAdminState
OBJECT-TYPE
Indicates the administrative status of the Dynamic TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.3CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelOperState
OBJECT-TYPE
Indicates the operational status of the Dynamic TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.4CienaGlobalStateread-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelSourceIpAddr
OBJECT-TYPE
Source IP address of the Dynamic TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.5IpAddressread-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelDestIpAddr
OBJECT-TYPE
Destination IP address of the Dynamic TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.6IpAddressread-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelNextHopIpAddr
OBJECT-TYPE
Next hop IP address of the Dynamic TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.7IpAddressread-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelPrevHopIpAddr
OBJECT-TYPE
Previous hop IP address of the Dynamic TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.8IpAddressread-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelForwardInLabel
OBJECT-TYPE
Indicates the incoming label of the Dynamic TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.9Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelForwardOutLabel
OBJECT-TYPE
Indicates the outgoing label of the Dynamic TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.10Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelReverseInLabel
OBJECT-TYPE
Indicates the incoming label of the Dynamic TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.11Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutLabel
OBJECT-TYPE
Indicates the outgoing label of the Dynamic TransitCorouted tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.12Unsigned32 (0..1048575)read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelTTLPolicy
OBJECT-TYPE
Specifies whether TTL is fixed or inherited from the frame.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.13TTLPolicyread-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelFixedTTL
OBJECT-TYPE
If the TTL policy for the Dynamic TransitCorouted tunnel is fixed, then this object is the TTL value.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.14Unsigned32 (1..255)read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelIncomingPackets
OBJECT-TYPE
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.15Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelOutgoingPackets
OBJECT-TYPE
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.16Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelIncomingBytes
OBJECT-TYPE
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.17Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelOutgoingBytes
OBJECT-TYPE
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.18Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingPackets
OBJECT-TYPE
The number of reverse incoming packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.19Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingPackets
OBJECT-TYPE
The number of reverse outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.20Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes
OBJECT-TYPE
The number of reverse incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.21Unsigned32read-onlycurrent
cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes
OBJECT-TYPE
The number of reverse outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.2.12.1.22Unsigned32read-onlycurrent
cienaCesGmplsAssociatedTunnelTable
OBJECT-TYPE
The (conceptual) table listing the Gmpls Associated tunnels.
1.3.6.1.4.1.1271.2.1.18.1.2.13not-accessiblecurrent
cienaCesGmplsAssociatedTunnelEntry
OBJECT-TYPE
This represents an entry of the Gmpls static encap tunnel table.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1not-accessiblecurrent
cienaCesGmplsAssociatedTunnelIndex
OBJECT-TYPE
Unique tunnel index in the table.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesGmplsAssociatedTunnelName
OBJECT-TYPE
specifies Gmpls associated tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.2DisplayStringread-onlycurrent
cienaCesGmplsAssociatedForwardTunnelName
OBJECT-TYPE
specifies associated forward tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.3DisplayStringread-onlycurrent
cienaCesGmplsAssociatedForwardTunnelType
OBJECT-TYPE
specifies associated forward tunnel type.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.4DisplayStringread-onlycurrent
cienaCesGmplsAssociatedReverseTunnelName
OBJECT-TYPE
specifies associated reverse tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.5DisplayStringread-onlycurrent
cienaCesGmplsAssociatedReverseTunnelType
OBJECT-TYPE
specifies associated reverse tunnel type.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.6DisplayStringread-onlycurrent
cienaCesGmplsAssociatedForwardTunnelDestIpAddr
OBJECT-TYPE
specifies associated Gmpls forward tunnel destination IP address
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.7IpAddressread-onlycurrent
cienaCesGmplsAssociatedDynamicTunnelSrcIpAddr
OBJECT-TYPE
specifies associated Gmpls reverse tunnel source IP address.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.8IpAddressread-onlycurrent
cienaCesGmplsAssociatedTunnelAdminState
OBJECT-TYPE
Administrator status of associated tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.9CienaGlobalStateread-onlycurrent
cienaCesGmplsAssociatedTunnelOperState
OBJECT-TYPE
Operational status of associated tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.10CienaGlobalStateread-onlycurrent
cienaCesGmplsAssociatedForwardTunnelOperState
OBJECT-TYPE
Operational status of associated forward tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.11CienaGlobalStateread-onlycurrent
cienaCesGmplsAssociatedReverseTunnelOperState
OBJECT-TYPE
Operational status of associated reverse tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.12CienaGlobalStateread-onlycurrent
cienaCesGmplsAssociatedProtectionRole
OBJECT-TYPE
specifies the protection role of the associated tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.13INTEGER {none(0), primary(1), backup(2)}read-onlycurrent
cienaCesGmplsAssociatedProtectionState
OBJECT-TYPE
specifies the protection status of the associated tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.14INTEGER {standby(0), active(1)}read-onlycurrent
cienaCesGmplsAssociatedTunnelProtectionPartnerName
OBJECT-TYPE
This object represents the tunnel name it is protecting
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.15DisplayStringread-onlycurrent
cienaCesGmplsAssociatedBfdMonitoring
OBJECT-TYPE
Specifies status of BFD monitoring.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.16CienaGlobalStateread-onlycurrent
cienaCesGmplsAssociatedBfdProfileName
OBJECT-TYPE
This object represent BFD profile name.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.17DisplayStringread-onlycurrent
cienaCesGmplsAssociatedBfdSessionName
OBJECT-TYPE
Specifies BFD session name.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.18DisplayStringread-onlycurrent
cienaCesGmplsAssociatedAisMonitoring
OBJECT-TYPE
Specifies status of AIS monitoring.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.19CienaGlobalStateread-onlycurrent
cienaCesGmplsAssociatedAisProfileName
OBJECT-TYPE
This object represent BFD profile name.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.20DisplayStringread-onlycurrent
cienaCesGmplsAssociatedBfdSessionFaulted
OBJECT-TYPE
Specifies BFD session error code.
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.21INTEGERread-onlycurrent
cienaCesGmplsAssociatedBfdProfileIndex
OBJECT-TYPE
This represents the BFD profile index in the BFD profile table configured for this gmpls associated tunnel
1.3.6.1.4.1.1271.2.1.18.1.2.13.1.22Unsigned32 (1..65535)read-onlycurrent
cienaCesGmplsTunnelARHopTable
OBJECT-TYPE
The GmplsTunnelARHopTable is used to indicate the hops for an Gmpls tunnel defined in GmplsTunnelTable, as reported by the Gmpls signalling protocol. Thus at a transit LSR, this table (if the table is supported and if the signaling protocol is recording actual route information) contains the actual route of the whole tunnel. If the signaling protocol is not recording the actual route, this table MAY report the information from the GmplsTunnelHopTable or the GmplsTunnelCHopTable. Each row in this table is indexed by GmplsTunnelARHopListIndex. Each row also has a secondary index GmplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. Please note that since the information necessary to build entries within this table is not provided by some Gmpls signalling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the Gmpls signalling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read- only. Note also that the contencts of this table may change while it is being read because of re-routing activities. A network administrator may verify that the actual route read is consistent by reference to the GmplsTunnelLastPathChange object.
1.3.6.1.4.1.1271.2.1.18.1.2.14not-accessiblecurrent
cienaCesGmplsTunnelARHopEntry
OBJECT-TYPE
An entry in this table represents a tunnel hop. An entry is created by the agent for signaled ERLSP set up by an Gmpls signalling protocol.
1.3.6.1.4.1.1271.2.1.18.1.2.14.1not-accessiblecurrent
cienaGmplsTunnelARHopListIndex
OBJECT-TYPE
Primary index into this table identifying a particular recorded hop list.
1.3.6.1.4.1.1271.2.1.18.1.2.14.1.1Unsigned32not-accessiblecurrent
cienaGmplsTunnelARHopIndex
OBJECT-TYPE
Secondary index into this table identifying the particular hop.
1.3.6.1.4.1.1271.2.1.18.1.2.14.1.2Unsigned32not-accessiblecurrent
cienaGmplsTunnelARHopAddrType
OBJECT-TYPE
The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.
1.3.6.1.4.1.1271.2.1.18.1.2.14.1.3INTEGERread-onlycurrent
cienaGmplsTunnelARHopIpAddr
OBJECT-TYPE
The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding GmplsTunnelARHopAddrType. If GmplsTunnelARHopAddrType is set to unnum(4), then this value contains the LSR Router ID of the unnumbered interface. Otherwise the agent SHOULD set this object to the zero-length string and the manager should ignore this object.
1.3.6.1.4.1.1271.2.1.18.1.2.14.1.4IpAddressread-onlycurrent
cienaGmplsTunnelARHopAddrUnnum
OBJECT-TYPE
If GmplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with GmplsTunnelARHopIpAddr which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
1.3.6.1.4.1.1271.2.1.18.1.2.14.1.5Unsigned32read-onlycurrent
cienaGmplsTunnelARHopLspId
OBJECT-TYPE
If GmplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
1.3.6.1.4.1.1271.2.1.18.1.2.14.1.6Unsigned32read-onlycurrent
cienaCesGmplsEncapTunnelNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.2.15
cienaCesGmplsNotifEncapTunnelTable
OBJECT-TYPE
Table of notification objects required for encap tunnel notification.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1not-accessiblecurrent
cienaCesGmplsNotifEncapTunnelEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesGmplsNotifEncapTunnelTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1not-accessiblecurrent
cienaCesGmplsNotifEncapTunnelIndex
OBJECT-TYPE
Tunnel index of the encap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelType
OBJECT-TYPE
Encap tunnel type of the encap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.2INTEGER {static(1), dynamic(2)}accessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelName
OBJECT-TYPE
This represents the encap tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.3DisplayStringaccessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelAdminState
OBJECT-TYPE
Administrative state of the encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.4CienaGlobalStateaccessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelOperState
OBJECT-TYPE
Operational state of the encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.5CienaGlobalStateaccessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelAisFaulted
OBJECT-TYPE
This is replaced by cienaCesGmplsNotifOamTunnelAisFaulted.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.6TunnelAisFaultaccessible-for-notifyobsolete
cienaCesGmplsNotifEncapTunnelFaultedNodeId
OBJECT-TYPE
IP address of the node with the AIS fault.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.7IpAddressaccessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelFarEndLerId
OBJECT-TYPE
IP address of the far end LER for the tunne with the AIS fault.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.8IpAddressaccessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelResult
OBJECT-TYPE
specifies the result of encap tunnel auto sizing/MBB.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.9INTEGER {success(1), fail(2)}accessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelProtectionRole
OBJECT-TYPE
specifies the protection role of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.10INTEGER {none(0), primary(1), backup(2)}accessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelRequestedBw
OBJECT-TYPE
specifies the requested bandwidth of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.11Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelOperationalBw
OBJECT-TYPE
specifies the operational bandwidth of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.12Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelMbbParentApp
OBJECT-TYPE
specifies the parent application using MBB of the dynamic encap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.13INTEGER {none(1), autosize(2), lspreoptimization(3)}accessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelOamFaulted
OBJECT-TYPE
Indication if the tunnel has Oam fault.
1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.14TunnelOamFaultaccessible-for-notifycurrent
cienaCesGmplsDecapTunnelNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.2.16
cienaCesGmplsNotifDecapTunnelTable
OBJECT-TYPE
Table of notification objects required for decap tunnel notification.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1not-accessiblecurrent
cienaCesGmplsNotifDecapTunnelEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesGmplsNotifDecapTunnelTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1not-accessiblecurrent
cienaCesGmplsNotifDecapTunnelIndex
OBJECT-TYPE
Tunnel index of the decap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelType
OBJECT-TYPE
Decap tunnel type of the decap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.2INTEGER {static(1), dynamic(2)}accessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelName
OBJECT-TYPE
This represents the decap tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.3DisplayStringaccessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelAdminState
OBJECT-TYPE
Administrative state of the decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.4CienaGlobalStateaccessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelOperState
OBJECT-TYPE
Operational state of the decap tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.5CienaGlobalStateaccessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelAisFaulted
OBJECT-TYPE
This is replaced by cienaCesGmplsNotifDecapTunnelOamFaulted.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.6TunnelAisFaultaccessible-for-notifyobsolete
cienaCesGmplsNotifDecapTunnelFaultedNodeId
OBJECT-TYPE
IP address of the node with the AIS fault.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.7IpAddressaccessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelFarEndLerId
OBJECT-TYPE
IP address of the far end LER for the tunne with the AIS fault.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.8IpAddressaccessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelOamFaulted
OBJECT-TYPE
Indication if the tunnel has Oam fault.
1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.9TunnelOamFaultaccessible-for-notifycurrent
cienaCesGmplsTransitTunnelNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.2.17
cienaCesGmplsNotifTransitTunnelTable
OBJECT-TYPE
Table of notification objects required for transit tunnel notification.
1.3.6.1.4.1.1271.2.1.18.1.2.17.1not-accessiblecurrent
cienaCesGmplsNotifTransitTunnelEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesGmplsNotifTransitTunnelTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1not-accessiblecurrent
cienaCesGmplsNotifTransitTunnelIndex
OBJECT-TYPE
Tunnel index of the transit tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesGmplsNotifTransitTunnelType
OBJECT-TYPE
Transit tunnel type of the transit tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.2INTEGER {static(1), dynamic(2)}accessible-for-notifycurrent
cienaCesGmplsNotifTransitTunnelName
OBJECT-TYPE
This represents the transit tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.3DisplayStringaccessible-for-notifycurrent
cienaCesGmplsNotifTransitTunnelAdminState
OBJECT-TYPE
Administrative state of the transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.4CienaGlobalStateaccessible-for-notifycurrent
cienaCesGmplsNotifTransitTunnelOperState
OBJECT-TYPE
Operational state of the transit tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.5CienaGlobalStateaccessible-for-notifycurrent
cienaCesGmplsNotifTransitTunnelOamFaulted
OBJECT-TYPE
Indication if the tunnel has Oam fault.
1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.6TunnelOamFaultaccessible-for-notifycurrent
cienaCesGmplsAssociatedTunnelNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.2.18
cienaCesGmplsNotifAssociatedTunnelTable
OBJECT-TYPE
Table of notification objects required for associated tunnel notification.
1.3.6.1.4.1.1271.2.1.18.1.2.18.1not-accessiblecurrent
cienaCesGmplsNotifAssociatedTunnelEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesGmplsNotifAssociatedTunnelTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1not-accessiblecurrent
cienaCesGmplsNotifAssociatedTunnelIndex
OBJECT-TYPE
Tunnel index of the associated tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesGmplsNotifAssociatedTunnelType
OBJECT-TYPE
Associated tunnel type of the associated tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.2INTEGER {static(1), dynamic(2)}accessible-for-notifycurrent
cienaCesGmplsNotifAssociatedTunnelName
OBJECT-TYPE
This represents the associated tunnel name.
1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.3DisplayStringaccessible-for-notifycurrent
cienaCesGmplsNotifAssociatedTunnelAdminState
OBJECT-TYPE
Administrative state of the associated tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.4CienaGlobalStateaccessible-for-notifycurrent
cienaCesGmplsNotifAssociatedTunnelOperState
OBJECT-TYPE
Operational state of the associated tunnel.
1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.5CienaGlobalStateaccessible-for-notifycurrent
cienaCesGmplsNotifAssociatedTunnelAisFaulted
OBJECT-TYPE
Replaced by cienaCesGmplsNotifAssociatedTunnelOamFaulted
1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.6TunnelAisFaultaccessible-for-notifyobsolete
cienaCesGmplsNotifAssociatedTunnelFaultedNodeId
OBJECT-TYPE
IP address of the node with the AIS fault.
1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.7IpAddressaccessible-for-notifycurrent
cienaCesGmplsNotifAssociatedTunnelFarEndLerId
OBJECT-TYPE
IP address of the far end LER for the tunne with the AIS fault.
1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.8IpAddressaccessible-for-notifycurrent
cienaCesGmplsNotifAssociatedTunnelOamFaulted
OBJECT-TYPE
Indication if the tunnel has Oam fault.
1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.9TunnelOamFaultaccessible-for-notifycurrent
cienaCesGmplsEncapTunnelGrpNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.2.19
cienaCesGmplsNotifEncapTunnelGrpTable
OBJECT-TYPE
Table of notification objects required for encap tunnel group notification.
1.3.6.1.4.1.1271.2.1.18.1.2.19.1not-accessiblecurrent
cienaCesGmplsNotifEncapTunnelGrpEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesGmplsNotifEncapTunnelGrpTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1not-accessiblecurrent
cienaCesGmplsNotifEncapTunnelGrpIndex
OBJECT-TYPE
Tunnel group index of the encap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelGrpName
OBJECT-TYPE
Tunnel group name of the encap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.2DisplayStringaccessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlIndex
OBJECT-TYPE
Active Encap Tunnel index of the tunnel group associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.3Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlName
OBJECT-TYPE
Active Encap Tunnel name of the Tunnel group associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.4DisplayStringaccessible-for-notifycurrent
cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlType
OBJECT-TYPE
Encap tunnel type of the encap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.5INTEGER {static(1), dynamic(2)}accessible-for-notifycurrent
cienaCesGmplsDecapTunnelGrpNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.2.20
cienaCesGmplsNotifDecapTunnelGrpTable
OBJECT-TYPE
Table of notification objects required for decap tunnel group notification.
1.3.6.1.4.1.1271.2.1.18.1.2.20.1not-accessiblecurrent
cienaCesGmplsNotifDecapTunnelGrpEntry
OBJECT-TYPE
An entry(conceptual row) in the cienaCesGmplsNotifDecapTunnelGrpTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1not-accessiblecurrent
cienaCesGmplsNotifDecapTunnelGrpIndex
OBJECT-TYPE
Tunnel group index of the decap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.1Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelGrpName
OBJECT-TYPE
Tunnel group name of the decap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.2DisplayStringaccessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlIndex
OBJECT-TYPE
Active Decap Tunnel index of the tunnel group associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.3Unsigned32 (1..65535)accessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlName
OBJECT-TYPE
Active Decap Tunnel name of the Tunnel group associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.4DisplayStringaccessible-for-notifycurrent
cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlType
OBJECT-TYPE
Decap tunnel type of the decap tunnel associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.5INTEGER {static(1), dynamic(2)}accessible-for-notifycurrent
cienaCesGmplsTunnelAisFaultErrorNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.2.21
cienaCesGmplsNotifTunnelAisFaultErrorTable
OBJECT-TYPE
Table of notification objects required for tunnel Ais Fault error notification.
1.3.6.1.4.1.1271.2.1.18.1.2.21.1not-accessiblecurrent
cienaCesGmplsNotifTunnelAisFaultErrorEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesGmplsNotifTunnelAisFaultErrorTable No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1not-accessiblecurrent
cienaCesGmplsNotifTunnelDecapLabel
OBJECT-TYPE
Decap label associated with the notification.
1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1.1Unsigned32 (16..1048575)accessible-for-notifycurrent
cienaCesGmplsNotifTunnelErrorMsg
OBJECT-TYPE
This represents the fault error message for decap label associated with the notification
1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1.2DisplayStringaccessible-for-notifycurrent
cienaCesMplsGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.3
cienaCesMplsAttrs
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.3.1
cienaCesMplsGlobalStaticAdminLabelRangeStart
OBJECT-TYPE
The beginning of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
1.3.6.1.4.1.1271.2.1.18.1.3.1.1Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticAdminLabelRangeEnd
OBJECT-TYPE
The end of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
1.3.6.1.4.1.1271.2.1.18.1.3.1.2Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticOperLabelRangeStart
OBJECT-TYPE
The beginning of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.3Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticOperLabelRangeEnd
OBJECT-TYPE
The end of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.4Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalDynamicAdminLabelRangeStart
OBJECT-TYPE
The beginning of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.5Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalDynamicAdminLabelRangeEnd
OBJECT-TYPE
The end of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.6Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalDynamicOperLabelRangeStart
OBJECT-TYPE
The beginning of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.7Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalDynamicOperLabelRangeEnd
OBJECT-TYPE
The end of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.8Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticAdminTunnelLabelRangeStart
OBJECT-TYPE
The beginning of the static tunnel administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
1.3.6.1.4.1.1271.2.1.18.1.3.1.9Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticAdminTunnelLabelRangeEnd
OBJECT-TYPE
The end of the static tunnel administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
1.3.6.1.4.1.1271.2.1.18.1.3.1.10Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticOperTunnelLabelRangeStart
OBJECT-TYPE
The beginning of the static tunnel operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.11Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticOperTunnelLabelRangeEnd
OBJECT-TYPE
The end of the static tunnel operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.12Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticAdminVcLabelRangeStart
OBJECT-TYPE
The beginning of the static VC administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
1.3.6.1.4.1.1271.2.1.18.1.3.1.13Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticAdminVcLabelRangeEnd
OBJECT-TYPE
The end of the static VC administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
1.3.6.1.4.1.1271.2.1.18.1.3.1.14Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticOperVcLabelRangeStart
OBJECT-TYPE
The beginning of the static VC operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.15Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalStaticOperVcLabelRangeEnd
OBJECT-TYPE
The end of the static VC operational label range. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.16Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsGlobalNextFreeStaticVcLabel
OBJECT-TYPE
The next free static VC label. There cannot be any overlap between static and dynamic label ranges.
1.3.6.1.4.1.1271.2.1.18.1.3.1.17Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsTunnelCosProfileTable
OBJECT-TYPE
Mpls cos-profile table.
1.3.6.1.4.1.1271.2.1.18.1.3.2not-accessiblecurrent
cienaCesMplsTunnelCosProfileEntry
OBJECT-TYPE
Mpls cos-profile table entry.
1.3.6.1.4.1.1271.2.1.18.1.3.2.1not-accessiblecurrent
cienaCesMplsTunnelCosProfileIndex
OBJECT-TYPE
Unique index for Mpls tunnel Cos profile.
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.1Unsigned32not-accessiblecurrent
cienaCesMplsTunnelCosProfileName
OBJECT-TYPE
Mpls tunnel Cos profile name
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.2DisplayStringread-onlycurrent
cienaCesMplsTunnelFrmCosPolicy
OBJECT-TYPE
Frame CoS policy of the tunnel.
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.3FCosPolicyread-onlycurrent
cienaCesMplsTunnelFrmCosMapId
OBJECT-TYPE
The frame CoS map ID of tunnel. This value is valid if the frame CoS policy selected for the tunnel is rcos-mapped.
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.4INTEGER (1..65535)read-onlycurrent
cienaCesMplsTunnelFrmCosMapName
OBJECT-TYPE
Mpls tunnel frame cos Map name
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.5DisplayStringread-onlycurrent
cienaCesMplsTunnelFixedTC
OBJECT-TYPE
If the frame CoS policy for the tunnel is fixed, this value is used for MPLS encapsulation.
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.6Unsigned32 (0..7)read-onlycurrent
cienaCesMplsTunnelRcosPolicy
OBJECT-TYPE
Resolved CoS policy of the tunnel.
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.7RCosPolicyread-onlycurrent
cienaCesMplsTunnelRcosMapName
OBJECT-TYPE
Mpls tunnel resolved cos Map name. This object is valid only for 39XX and 51XX platforms
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.8DisplayStringread-onlycurrent
cienaCesMplsTunnelRCosMapId
OBJECT-TYPE
The resolved CoS map ID of the tunnel. This value is valid if the resolved CoS policy selected for the tunnel is rcos-mapped. This object is valid only for 39XX and 51XX platforms
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.9INTEGER (1..65535)read-onlycurrent
cienaCesMplsTunnelRcosProfileName
OBJECT-TYPE
Mpls Tunnel resolved cos Profile name. This object is valid only for 87XX platforms
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.10DisplayStringread-onlycurrent
cienaCesMplsTunnelRCosProfileId
OBJECT-TYPE
The resolved Cos profile ID of the Tunnel. This value is valid if the resolved Cos policy selected for the pseudowire is rcos-mapped. This object is valid only for 87XX platforms
1.3.6.1.4.1.1271.2.1.18.1.3.2.1.11Unsigned32 (1..65535)read-onlycurrent
cienaCesMplsGlobalTunnelPath
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.3.3
cienaCesMplsGlobalTunnelPathTable
OBJECT-TYPE
The (conceptual) table listing the MPLS tunnel paths. To create an entry in the tunnel path table, cienaCesMplsGlobalTunnelPathName and cienaCesMplsGlobalTunnelPathRowStatus must both be specified.
1.3.6.1.4.1.1271.2.1.18.1.3.3.1not-accessiblecurrent
cienaCesMplsGlobalTunnelPathEntry
OBJECT-TYPE
An entry in the tunnel path table.
1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1not-accessiblecurrent
cienaCesMplsGlobalTunnelPathIndex
OBJECT-TYPE
A unique index in the path entry table.
1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.1Unsigned32not-accessiblecurrent
cienaCesMplsGlobalTunnelPathName
OBJECT-TYPE
Name associated with the path.
1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsGlobalTunnelPathUseCount
OBJECT-TYPE
Indicates the number of encap tunnels that are using this path.
1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.3Counter32read-onlycurrent
cienaCesMplsGlobalTunnelPathHopTable
OBJECT-TYPE
The (conceptual) table listing the MPLS tunnel path hop. To create an entry in the path-hop table, cienaCesMplsGlobalTunnelPathHopIpAddr and cienaCesMplsGlobalTunnelPathHopRowStatus must both be specified.
1.3.6.1.4.1.1271.2.1.18.1.3.3.2not-accessiblecurrent
cienaCesMplsGlobalTunnelPathHopEntry
OBJECT-TYPE
A tunnel hop entry.
1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1not-accessiblecurrent
cienaCesMplsGlobalTunnelPathHopIndex
OBJECT-TYPE
Unique index in the path hop table.
1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.1Unsigned32not-accessiblecurrent
cienaCesMplsGlobalTunnelPathHopIpAddr
OBJECT-TYPE
IP address associated with this hop. This object cannot be modified once the path hop is created.
1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.2IpAddressread-onlycurrent
cienaCesMplsGlobalTunnelPathHopType
OBJECT-TYPE
Indidcates the hop type of the path member. This object cannot be modified once the path hop is created.
1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.3INTEGER {strict(1), loose(2)}read-onlycurrent
cienaCesMplsGlobalFreeStaticTunnelLabelTable
OBJECT-TYPE
Mpls Free static Tunnel Label table.
1.3.6.1.4.1.1271.2.1.18.1.3.4not-accessiblecurrent
cienaCesMplsGlobalFreeStaticTunnelLabelEntry
OBJECT-TYPE
Mpls Free static Tunnel Label table.
1.3.6.1.4.1.1271.2.1.18.1.3.4.1not-accessiblecurrent
cienaCesMplsGlobalFreeStaticTunnelLabelIndex
OBJECT-TYPE
Unique index for Mpls Free static Tunnel Label table.
1.3.6.1.4.1.1271.2.1.18.1.3.4.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesMplsGlobalFreeStaticTunnelLabel
OBJECT-TYPE
Mpls Free static Tunnel Label.
1.3.6.1.4.1.1271.2.1.18.1.3.4.1.2Unsigned32 (16..1048575)read-onlycurrent
cienaCesMplsPw
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.4
cienaCesMplsPwTable
OBJECT-TYPE
The (conceptual) table listing the MPLS pseudo wires.
1.3.6.1.4.1.1271.2.1.18.1.4.1not-accessiblecurrent
cienaCesMplsPwEntry
OBJECT-TYPE
This represents an entry of the MPLS pseudowire table.
1.3.6.1.4.1.1271.2.1.18.1.4.1.1not-accessiblecurrent
cienaCesMplsPwIndex
OBJECT-TYPE
Unique index in the table.
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesMplsPwSignallingType
OBJECT-TYPE
Specifies Pw signalling type
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.2INTEGER {static(1), dynamic(2)}read-onlycurrent
cienaCesMplsPwId
OBJECT-TYPE
This represents the unique id that is signalled in LDP
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.3Unsigned32 (1..2147483647)read-onlycurrent
cienaCesMplsPwName
OBJECT-TYPE
This represents the pseudowire name
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.4DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwCustomerName
OBJECT-TYPE
This represents the customer name
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.5DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwAdminState
OBJECT-TYPE
This represents the pseudowire administrative status
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.6CienaGlobalStateread-onlycurrent
cienaCesMplsPwOperState
OBJECT-TYPE
This represents the pseudowire operational status
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.7CienaGlobalStateread-onlycurrent
cienaCesMplsPwPeerIpAddr
OBJECT-TYPE
Peer Ip address of the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.8IpAddressread-onlycurrent
cienaCesMplsPwInLabel
OBJECT-TYPE
Indicates the inbound label of the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.9Integer32 (-1..1048575)read-onlycurrent
cienaCesMplsPwOutLabel
OBJECT-TYPE
Indicates the outbound label of the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.10Integer32 (-1..1048575)read-onlycurrent
cienaCesMplsPwStatusTlv
OBJECT-TYPE
This represents whether the pseudowire status tlv is turned on or off
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.11INTEGER {on(1), off(2)}read-onlycurrent
cienaCesMplsPwRefreshStatusIntvl
OBJECT-TYPE
This represents the refresh interval for status tlv. This is only applicable for static Pseudowire. For dynamic Pseudowire this is displayed as 0.
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.12Unsigned32 (1..2147483647)read-onlycurrent
cienaCesMplsPwLocalFault
OBJECT-TYPE
This represents the pseudowire local fault
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.13VCStatusread-onlycurrent
cienaCesMplsPwRemoteFault
OBJECT-TYPE
This represents the pseudowire remote fault
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.14VCStatusread-onlycurrent
cienaCesMplsPwMtu
OBJECT-TYPE
Indicates the pseudowire mtu
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.15Unsigned32 (1500..9128)read-onlycurrent
cienaCesMplsPwType
OBJECT-TYPE
This represents the pseudowire type raw or tagged
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.16INTEGER {raw(1), tagged(2), tdm(3)}read-onlycurrent
cienaCesMplsPwMode
OBJECT-TYPE
This represents the pseudowire mode whether it is mesh, spoke, or a MS-PW segment
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.17INTEGER {mesh(1), spoke(2), switching(3)}read-onlycurrent
cienaCesMplsPwCoSProfileName
OBJECT-TYPE
This represents the cos profile name that is being used by pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.18DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwCoSProfileIndex
OBJECT-TYPE
This represents the index in cienaCesMplsPwCosProfile table
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.19Unsigned32 (1..65535)read-onlycurrent
cienaCesMplsPwEgressL2PtTransform
OBJECT-TYPE
This represents the pseudowire L2PT transform for classified L2 CFT control frames
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.20CienaGlobalStateread-onlycurrent
cienaCesMplsPwVccVProfileName
OBJECT-TYPE
This represents the vccv profile name that is being used by pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.21DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwVccVProfileIndex
OBJECT-TYPE
This represents the index in cienaCesMplsPwVccvProfile table
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.22Unsigned32 (1..65535)read-onlycurrent
cienaCesMplsPwLocalCcCv
OBJECT-TYPE
This represents the CC/CV configured on the local pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.23DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwRemoteCcCv
OBJECT-TYPE
This represents the CC/CV configured on the remote pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.24DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwOperatingCcCv
OBJECT-TYPE
This represents the negotiated/operating CC/CV
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.25DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwBlocking
OBJECT-TYPE
Specifies whether pseudowire is blocking or forwarding
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.26INTEGER {yes(1), no(2)}read-onlycurrent
cienaCesMplsPwVifIndex
OBJECT-TYPE
This represents the Vif/tunnel group that is being used for the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.27Unsigned32 (32769..2147483647)read-onlycurrent
cienaCesMplsPwConfigTunnelName
OBJECT-TYPE
This represents the configured transport tunnel name for the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.28DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwConfigTunnelType
OBJECT-TYPE
This represents the configured transport tunnel type for the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.29TunnelTyperead-onlycurrent
cienaCesMplsPwConfigTunnelIndex
OBJECT-TYPE
Specifies the configured transport tunnel index in one of the cienaCesMplsTunnel/cienaCesGmplsTunnel tables for the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.30Unsigned32 (1..65535)read-onlycurrent
cienaCesMplsPwActiveTunnelName
OBJECT-TYPE
This represents the active transport tunnel name for the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.31DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwActiveTunnelType
OBJECT-TYPE
This represents the active transport tunnel type for the pseudo wire. This would be the same as configured tunnel type
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.32TunnelTyperead-onlycurrent
cienaCesMplsPwActiveTunnelIndex
OBJECT-TYPE
Specifies the active transport tunnel index in one of the cienaCesMplsTunnel/cienaCesGmplsTunnel tables for the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.33Unsigned32 (1..65535)read-onlycurrent
cienaCesMplsPwRole
OBJECT-TYPE
This represents the pseudowire role whether it is a protecting or primary pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.34INTEGER {primary(1), secondary(2), stand-alone(3)}read-onlydeprecated
cienaCesMplsPwPrimaryPwName
OBJECT-TYPE
This represents the primary pseudowire name if this is a secondary pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.35DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwPrimaryPwIndex
OBJECT-TYPE
This represents the primary pseudowire index in cienaCesMplsPw table if this is a secondary pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.36Unsigned32 (1..65535)read-onlycurrent
cienaCesMplsPwVsIndex
OBJECT-TYPE
This represents the virtual switch index in the virtual switch MIB table
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.37Unsigned32 (1..65535)read-onlycurrent
cienaCesServiceDelimiterVID
OBJECT-TYPE
This represents the service delimiter VID. This object is valid only for 39XX and 51XX platforms
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.38Unsigned32 (1..4094)read-onlydeprecated
cienaCesServiceDelimiterTPID
OBJECT-TYPE
This represents the service delimiter TPID. This object is valid only for 39XX and 51XX platforms
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.39Unsigned32read-onlydeprecated
cienaCesMplsPwReversion
OBJECT-TYPE
This represents whether the Pseudowire Reversion is turned on or off. With the Reversion turned on, when the Primary Pseudowire has recovered from earlier failure, it will be held down for a period of cienaCesMplsPwRevertTime(sec) before the switchover from the Backup Pseudowire to Primary Pseudowire takes place. With the Reversion turned off, the user must use manual switchover command to perform a switchover back to the Primary Pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.40INTEGER {on(1), off(2)}read-onlycurrent
cienaCesMplsPwRevertTime
OBJECT-TYPE
This represents the Reversion Hold-time(in seconds) on the Primary Pseudowire. When the Primary Pseudowire has recovered from earlier failure, it will be held down for the length of this hold time. Once the time has elapsed, and if the Primary Pseudowire does not encountered any more failure, there will be a switchover from the Backup Pseudowire back to the Primary Pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.41Unsigned32 (0..3600)read-onlycurrent
cienaCesMplsPwProtectionRole
OBJECT-TYPE
This represents the role of the pseudowire in a Protection bundle.
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.42INTEGER {primary-pseudowire(1), backup-pseudowire(2), stand-alone-pseudowire(3)}read-onlycurrent
cienaCesMplsPwProtectionState
OBJECT-TYPE
This represents the pseudowire protection state. It only applies to those pseudowires in the protection bundle. For stand alone pseudowire this has no meaning and is reflected as n/a in this object
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.43INTEGER {not-applicable(1), active(2), standby(3), man-swo-active(4), man-swo-standby(5), pw-reversion-pending(6), pw-activation-pending(7)}read-onlycurrent
cienaCesMplsPwVsName
OBJECT-TYPE
This represents the virtual switch name to which the pseudowire is attached.
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.44DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsPwStatusQuery
OBJECT-TYPE
This represents whether the pseudowire status query is enabled. With the status query enabled, the pseudowire is able to query the remote status when it comes up and the remote status is unknown.
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.45INTEGER {on(1), off(2)}read-onlycurrent
cienaCesMplsMsPwPeerPwName
OBJECT-TYPE
This represents the peer pseudowire name if this is a MS-PW.
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.46DisplayString (SIZE(1..31))read-onlycurrent
cienaCesMplsMsPwPeerPwIndex
OBJECT-TYPE
This represents the peer pseudowire index if this is a MS-PW.
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.47Unsigned32 (1..65535)read-onlycurrent
cienaCesMplsPwIdInRemoteFault
OBJECT-TYPE
This represents the PW Id in the SP-PE TLV of the remote Status
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.48Unsigned32 (1..2147483647)read-onlycurrent
cienaCesMplsLocalIpInRemoteFault
OBJECT-TYPE
Local Ip address in the SP-PE TLV of the remote Status
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.49IpAddressread-onlycurrent
cienaCesMplsRemoteIpInRemoteFault
OBJECT-TYPE
Remote Ip address in the SP-PE TLV of the remote Status
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.50IpAddressread-onlycurrent
cienaCesMplsPwFaultToNextHop
OBJECT-TYPE
This represents the aggregated MS-PW faults sent to the next hop
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.51VCStatusread-onlycurrent
cienaCesMplsPwIdInFaultToNextHop
OBJECT-TYPE
This represents the PW Id in the SP-PE TLV sent to the next hop
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.52Unsigned32 (1..2147483647)read-onlycurrent
cienaCesMplsLocalIpInFaultToNextHop
OBJECT-TYPE
Local Ip address in the SP-PE TLV sent to the next hop
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.53IpAddressread-onlycurrent
cienaCesMplsRemoteIpInFaultToNextHop
OBJECT-TYPE
Remote Ip address in the SP-PE TLV sent to the next hop
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.54IpAddressread-onlycurrent
cienaCesMplsPwConfigBandwidth
OBJECT-TYPE
This represents the configured Bandwidth(in kbps) of pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.55MplsBitRate (0..10000000)read-onlycurrent
cienaCesMplsPwOperBandwidth
OBJECT-TYPE
This represents the operational Bandwidth(in kbps) of pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.56MplsBitRate (0..10000000)read-onlycurrent
cienaCesMplsPwBandwidthState
OBJECT-TYPE
This represents the Bandwidth state of pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.1.1.57INTEGER {none(1), configured(2), notRequired(3), admitted(4), acquired(5), rejected(6)}read-onlycurrent
cienaCesMplsPwCosProfileTable
OBJECT-TYPE
The (conceptual) table listing the MPLS pseudowire cos profiles.
1.3.6.1.4.1.1271.2.1.18.1.4.2not-accessiblecurrent
cienaCesMplsPwCosProfileEntry
OBJECT-TYPE
This represents an entry of the MPLS pseudowire Cos profile table.
1.3.6.1.4.1.1271.2.1.18.1.4.2.1not-accessiblecurrent
cienaCesMplsPwCosProfileIndex
OBJECT-TYPE
Unique index for Mpls Pw Cos profile.
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.1Unsigned32not-accessiblecurrent
cienaCesMplsPwCosProfileName
OBJECT-TYPE
Mpls pseudowire Cos profile name
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.2DisplayStringread-onlycurrent
cienaCesMplsPwCosProfileFrmCosPolicy
OBJECT-TYPE
Frame CoS policy of the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.3FCosPolicyread-onlycurrent
cienaCesMplsPwCosProfileFrmCosMapId
OBJECT-TYPE
The frame CoS map ID of pseudo wire. This value is valid if the frame Cos policy selected for the pseudowire is rcos-mapped
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.4Unsigned32 (1..65535)read-onlycurrent
cienaCesMplsPwCosProfileFrmCosMapName
OBJECT-TYPE
Mpls pseudowire frame cos Map name
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.5DisplayStringread-onlycurrent
cienaCesMplsPwCosProfileFixedTC
OBJECT-TYPE
If the frame CoS policy for the pseudowire is fixed, this value is used for MPLS encapsulation.
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.6Unsigned32 (0..7)read-onlycurrent
cienaCesMplsPwCosProfileRcosPolicy
OBJECT-TYPE
Resolved CoS policy of the pseudowire
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.7RCosPolicyread-onlycurrent
cienaCesMplsPwCosProfileRcosMapName
OBJECT-TYPE
Mpls pseudowire resolved cos Map name. This object is valid only for 39XX and 51XX platforms
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.8DisplayStringread-onlycurrent
cienaCesMplsPwCosProfileRCosMapId
OBJECT-TYPE
The resolved Cos map ID of the pseudo wire. This value is valid if the resolved Cos policy selected for the pseudowire is rcos-mapped. This object is valid only for 39XX and 51XX platforms
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.9Unsigned32 (1..65535)read-onlycurrent
cienaCesMplsPwCosProfileRcosProfileName
OBJECT-TYPE
Mpls pseudowire resolved cos Profile name. This object is valid only for 87XX
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.10DisplayStringread-onlycurrent
cienaCesMplsPwCosProfileRCosProfileId
OBJECT-TYPE
The resolved Cos profile ID of the pseudo wire. This value is valid if the resolved Cos policy selected for the pseudowire is rcos-mapped. This object is valid only for 87XX
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.11INTEGER (1..65535)read-onlycurrent
cienaCesMplsPwCosProfileRCosFixed
OBJECT-TYPE
If the resolved CoS policy for the pseudowire is fixed, this value is used
1.3.6.1.4.1.1271.2.1.18.1.4.2.1.12Unsigned32 (0..7)read-onlycurrent
cienaCesMplsPwVccvProfileTable
OBJECT-TYPE
The (conceptual) table listing the MPLS pseudowire Vccv profiles.
1.3.6.1.4.1.1271.2.1.18.1.4.3not-accessiblecurrent
cienaCesMplsPwVccvProfileEntry
OBJECT-TYPE
This represents an entry of the MPLS pseudowire Vccv profile table.
1.3.6.1.4.1.1271.2.1.18.1.4.3.1not-accessiblecurrent
cienaCesMplsPwVccvProfileIndex
OBJECT-TYPE
Unique index for Mpls Pw Vccv profile.
1.3.6.1.4.1.1271.2.1.18.1.4.3.1.1Unsigned32not-accessiblecurrent
cienaCesMplsPwVccvProfileName
OBJECT-TYPE
Mpls pseudowire Vccv profile name
1.3.6.1.4.1.1271.2.1.18.1.4.3.1.2DisplayStringread-onlycurrent
cienaCesMplsPwVccvProfileCcTtlExp
OBJECT-TYPE
This represents the pseudowire TTL-expiry VCCV control channel (CC Type-3) operation
1.3.6.1.4.1.1271.2.1.18.1.4.3.1.3INTEGER {on(1), off(2)}read-onlycurrent
cienaCesMplsPwVccvProfileCcCienaOob
OBJECT-TYPE
This represents the pseudowire CIENA proprietary out-of-band VCCV control channel (CC Type-4) operation
1.3.6.1.4.1.1271.2.1.18.1.4.3.1.4INTEGER {on(1), off(2)}read-onlycurrent
cienaCesMplsPwNotif
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.4.4
cienaCesMplsPwNotifTable
OBJECT-TYPE
Table of notification objects required for pseudowire notification.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1not-accessiblecurrent
cienaCesMplsPwNotifEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesMplsPwNotifTable. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1not-accessiblecurrent
cienaCesMplsPwNotifPwIndex
OBJECT-TYPE
Unique pseudowire index in the PW table
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.1Unsigned32 (1..4294967295)accessible-for-notifycurrent
cienaCesMplsPwNotifPwId
OBJECT-TYPE
Unique Pseudowire ID used to identify the PW in the signaling. For the static PW this represents the locally configured value.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.2Unsigned32 (1..4294967295)accessible-for-notifycurrent
cienaCesMplsPwNotifPwName
OBJECT-TYPE
This represents the locally configured PW name.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.3DisplayStringaccessible-for-notifycurrent
cienaCesMplsPwNotifPwPeerIpAddr
OBJECT-TYPE
This represents the IP address of the Peer on the remote end of the PW.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.4IpAddressaccessible-for-notifycurrent
cienaCesMplsPwNotifPriPwId
OBJECT-TYPE
This represents the PW Id of the primary PW.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.5Unsigned32 (1..4294967295)accessible-for-notifycurrent
cienaCesMplsPwNotifPriPwName
OBJECT-TYPE
This represents the PW name of the primary PW.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.6DisplayStringaccessible-for-notifycurrent
cienaCesMplsPwNotifPriPwPeerIpAddr
OBJECT-TYPE
This represents the IP address of the Peer on the remote end of the primary PW.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.7IpAddressaccessible-for-notifycurrent
cienaCesMplsPwNotifActPwIndex
OBJECT-TYPE
Unique pseudowire index in the PW table
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.8Unsigned32 (1..4294967295)accessible-for-notifycurrent
cienaCesMplsPwNotifActPwId
OBJECT-TYPE
This represents the PW Id of the active PW.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.9Unsigned32 (1..4294967295)accessible-for-notifycurrent
cienaCesMplsPwNotifActPwName
OBJECT-TYPE
This represents the PW name of the active PW.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.10DisplayStringaccessible-for-notifycurrent
cienaCesMplsPwNotifActPwPeerIpAddr
OBJECT-TYPE
This represents the IP address of the Peer on the remote end of the active PW.
1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.11IpAddressaccessible-for-notifycurrent
cienaCesMplsPWTrafficStatsTable
OBJECT-TYPE
Mpls PW Traffic Statistics table. The attributes in this table are supported only on specific platforms.
1.3.6.1.4.1.1271.2.1.18.1.4.5not-accessiblecurrent
cienaCesMplsPWTrafficStatsEntry
OBJECT-TYPE
Mpls PW Traffic Statistics table entry.
1.3.6.1.4.1.1271.2.1.18.1.4.5.1not-accessiblecurrent
cienaCesMplsPWTrafficStatsPWIndex
OBJECT-TYPE
Unique index for Mpls PW Traffic Statistics table.
1.3.6.1.4.1.1271.2.1.18.1.4.5.1.1Unsigned32not-accessiblecurrent
cienaCesMplsPWTrafficStatsIncomingPackets
OBJECT-TYPE
The number of incoming packets for the given PW.
1.3.6.1.4.1.1271.2.1.18.1.4.5.1.2Unsigned32read-onlycurrent
cienaCesMplsPWTrafficStatsOutgoingPackets
OBJECT-TYPE
The number of outgoing packets for the given PW.
1.3.6.1.4.1.1271.2.1.18.1.4.5.1.3Unsigned32read-onlycurrent
cienaCesMplsPWTrafficStatsIncomingBytes
OBJECT-TYPE
The number of incoming bytes for the given PW.
1.3.6.1.4.1.1271.2.1.18.1.4.5.1.4Unsigned32read-onlycurrent
cienaCesMplsPWTrafficStatsOutgoingBytes
OBJECT-TYPE
The number of outgoing bytes for the given PW.
1.3.6.1.4.1.1271.2.1.18.1.4.5.1.5Unsigned32read-onlycurrent
cienaCesMplsTe
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.18.1.5
cienaCesTeLinkTable
OBJECT-TYPE
This table captures the TE-link entries along with their respective attributes.
1.3.6.1.4.1.1271.2.1.18.1.5.1not-accessiblecurrent
cienaCesTeLinkEntry
OBJECT-TYPE
This represents an entry for the TE-Link interface
1.3.6.1.4.1.1271.2.1.18.1.5.1.1not-accessiblecurrent
cienaCesTeIfIndex
OBJECT-TYPE
This represents the unique index for TE-Interface.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.1Unsigned32 (1..65535)not-accessiblecurrent
cienaCesTeInterfaceName
OBJECT-TYPE
This represents the TE Interface name.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesTeLinkMetric
OBJECT-TYPE
Link cost of the TE-Interface.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.3Unsigned32 (1..4294967295)read-onlycurrent
cienaCesTeResourceColorGroupIndex
OBJECT-TYPE
Resource Color Group Index this TE-link is associated to.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.4Unsigned32 (1..64)read-onlycurrent
cienaCesTeResourceColorBitMask
OBJECT-TYPE
This represents individual bit for Resource Color which will be set in Resource Color Group.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.5OCTET STRING (SIZE(4))read-onlycurrent
cienaCesMplsClassProfIndex
OBJECT-TYPE
Class Profile Index this TE-link is associated to.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.6Unsigned32 (1..500)read-onlycurrent
cienaCesTeLinkMode
OBJECT-TYPE
TE mode of the TE-Interface.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.7TEModeread-onlycurrent
cienaCesTeLinkSrlgCount
OBJECT-TYPE
This identifies the total number of SRLGs configured on this TE link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.8Unsigned32read-onlycurrent
cienaCesTeLinkMaximumBandwidth
OBJECT-TYPE
Maximum TE-link Bandwidth(in kbps). This is same as the port bandwidth on which this TE-link is created
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.9MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkMaximumReservableBandwidth
OBJECT-TYPE
Maximum Reservable bandwidth(in kbps) on this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.10MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkTotalBandwidthPrio0
OBJECT-TYPE
Total Priority 0 Bandwidth(in kbps) allocated in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.11MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkReservedBandwidthPrio0
OBJECT-TYPE
Reserved Priority 0 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.12MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkUnReservedBandwidthPrio0
OBJECT-TYPE
UnReserved Priority 0 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.13MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkTotalBandwidthPrio1
OBJECT-TYPE
Total Priority 1 Bandwidth(in kbps) allocated in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.14MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkReservedBandwidthPrio1
OBJECT-TYPE
Reserved Priority 1 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.15MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkUnReservedBandwidthPrio1
OBJECT-TYPE
UnReserved Priority 1 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.16MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkTotalBandwidthPrio2
OBJECT-TYPE
Total Priority 2 Bandwidth(in kbps) allocated in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.17MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkReservedBandwidthPrio2
OBJECT-TYPE
Reserved Priority 2 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.18MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkUnReservedBandwidthPrio2
OBJECT-TYPE
UnReserved Priority 2 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.19MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkTotalBandwidthPrio3
OBJECT-TYPE
Total Priority 3 Bandwidth(in kbps) allocated in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.20MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkReservedBandwidthPrio3
OBJECT-TYPE
Reserved Priority 3 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.21MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkUnReservedBandwidthPrio3
OBJECT-TYPE
UnReserved Priority 3 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.22MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkTotalBandwidthPrio4
OBJECT-TYPE
Total Priority 4 Bandwidth(in kbps) allocated in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.23MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkReservedBandwidthPrio4
OBJECT-TYPE
Reserved Priority 4 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.24MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkUnReservedBandwidthPrio4
OBJECT-TYPE
UnReserved Priority 4 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.25MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkTotalBandwidthPrio5
OBJECT-TYPE
Total Priority 5 Bandwidth(in kbps) allocated in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.26MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkReservedBandwidthPrio5
OBJECT-TYPE
Reserved Priority 5 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.27MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkUnReservedBandwidthPrio5
OBJECT-TYPE
UnReserved Priority 5 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.28MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkTotalBandwidthPrio6
OBJECT-TYPE
Total Priority 6 Bandwidth(in kbps) allocated in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.29MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkReservedBandwidthPrio6
OBJECT-TYPE
Reserved Priority 6 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.30MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkUnReservedBandwidthPrio6
OBJECT-TYPE
UnReserved Priority 6 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.31MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkTotalBandwidthPrio7
OBJECT-TYPE
Total Priority 7 Bandwidth(in kbps) allocated in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.32MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkReservedBandwidthPrio7
OBJECT-TYPE
Reserved Priority 7 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.33MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeLinkUnReservedBandwidthPrio7
OBJECT-TYPE
UnReserved Priority 7 Bandwidth(in kbps) in this TE-link.
1.3.6.1.4.1.1271.2.1.18.1.5.1.1.34MplsBitRate (0..1000000000)read-onlycurrent
cienaCesTeResourceGrpTable
OBJECT-TYPE
This table captures the Resource Color Group Template entries.
1.3.6.1.4.1.1271.2.1.18.1.5.2not-accessiblecurrent
cienaCesTeResGrpEntry
OBJECT-TYPE
An entry in this table exists for each of the Resource color group template.
1.3.6.1.4.1.1271.2.1.18.1.5.2.1not-accessiblecurrent
cienaCesTeResourceColorGrpIndex
OBJECT-TYPE
This represents the unique index for Resource Color Group entry. Index 0 is used to get the colors which are not associated to any color group cienaCesTeResourceColorsTable
1.3.6.1.4.1.1271.2.1.18.1.5.2.1.1Unsigned32 (0..64)not-accessiblecurrent
cienaCesTeResourceGrpName
OBJECT-TYPE
This represents the name of the Resource Color Group.
1.3.6.1.4.1.1271.2.1.18.1.5.2.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesTeResourceColorGroupBitMask
OBJECT-TYPE
This represents the bitmask value for colors added to this Resource Color Group.
1.3.6.1.4.1.1271.2.1.18.1.5.2.1.3OCTET STRING (SIZE(4))read-onlycurrent
cienaCesTeResourceColorGroupUseCount
OBJECT-TYPE
Indicates the number of Tunnels using this MPLS Resource Color Group.
1.3.6.1.4.1.1271.2.1.18.1.5.2.1.4Counter32read-onlycurrent
cienaCesTeResourceColorsTable
OBJECT-TYPE
This table captures the Resource Colors entries. These colors can be associated to any Resource Color Group
1.3.6.1.4.1.1271.2.1.18.1.5.3not-accessiblecurrent
cienaCesTeResColorEntry
OBJECT-TYPE
An entry in this table exists for each of the Resource colors configured along with its associated Resource Group.
1.3.6.1.4.1.1271.2.1.18.1.5.3.1not-accessiblecurrent
cienaCesTeResourceColorIndex
OBJECT-TYPE
This represents the unique index for Resource Color entry.
1.3.6.1.4.1.1271.2.1.18.1.5.3.1.1Unsigned32 (1..32)not-accessiblecurrent
cienaCesTeResourceColorName
OBJECT-TYPE
This represents the name of the Resource Color.
1.3.6.1.4.1.1271.2.1.18.1.5.3.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesTeResourceColorBit
OBJECT-TYPE
This represents individual bit for Resource Color which will be set in Resource Color Group's cienaCesTeResourceColorGroupBitMask.
1.3.6.1.4.1.1271.2.1.18.1.5.3.1.3OCTET STRING (SIZE(4))read-onlycurrent
cienaCesTeResourceColorUseCount
OBJECT-TYPE
Indicates the number of MPLS Resource Groups using this Resource Color.
1.3.6.1.4.1.1271.2.1.18.1.5.3.1.4Counter32read-onlycurrent
cienaCesTeLinkSrlgTable
OBJECT-TYPE
This table specifies the SRLGs associated with TE links.
1.3.6.1.4.1.1271.2.1.18.1.5.4not-accessiblecurrent
cienaCesTeLinkSrlgEntry
OBJECT-TYPE
An entry in this table contains information about an SRLG associated with a TE link. An ifEntry in the ifTable must exist before a teLinkSrlgEntry using the same ifIndex is created. The ifType of ifEntry must be teLink(200). If a TE link entry in the ifTable is destroyed, then so are all of the entries in the teLinkSrlgTable that use the ifIndex of this TE link.
1.3.6.1.4.1.1271.2.1.18.1.5.4.1not-accessiblecurrent
cienaCesTeLinkSrlg
OBJECT-TYPE
This identifies an SRLG supported by the TE link. An SRLG is identified with a 32-bit number that is unique within an IGP domain. Zero is a valid SRLG number.
1.3.6.1.4.1.1271.2.1.18.1.5.4.1.1Unsigned32 (0..4294967295)not-accessiblecurrent
cienaCesTeLinkSrlgStatus
OBJECT-TYPE
This variable represents the SRLG value status. Currently we support only active(1) indicating SRLG is configured.
1.3.6.1.4.1.1271.2.1.18.1.5.4.1.2SRLGStateread-onlycurrent
cienaCesMplsMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.2.17
cienaCesMplsMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.2.17.0
cienaCesGmplsMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.2.17.1
cienaCesMplsPwMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.2.17.2

Notifications

NameOIDStatus
cienaCesMplsTunnelOperStateChgTrap
NOTIFICATION-TYPE
This notification is sent when the operational state of an encap tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifEncapTunnelIndex, cienaCesMplsNotifEncapTunnelType, cienaCesMplsNotifEncapTunnelName, cienaCesMplsNotifEncapTunnelAdminState, cienaCesMplsNotifEncapTunnelOperState, cienaCesMplsNotifEncapTunnelOamFaulted, cienaCesMplsNotifEncapTunnelFaultNodeId.
1.3.6.1.4.1.1271.2.2.17.0.1current
cienaCesMplsEncapTunnelGrpActiveEncapTunnelChange
NOTIFICATION-TYPE
This notification is sent whenever the active encap tunnel in a tunnel group changes.
1.3.6.1.4.1.1271.2.2.17.0.2current
cienaCesMplsTransitTunnelOperStateChgTrap
NOTIFICATION-TYPE
This notification is sent when the operational state of a transit tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifTransitTunnelIndex, cienaCesMplsNotifTransitTunnelType, cienaCesMplsNotifTransitTunnelName, cienaCesMplsNotifTransitTunnelAdminState, cienaCesMplsNotifTransitTunnelOperState, cienaCesMplsNotifTransitTunnelOamFaulted.
1.3.6.1.4.1.1271.2.2.17.0.3current
cienaCesMplsAssociatedTunnelOperStateChgTrap
NOTIFICATION-TYPE
This notification is sent when the operational state of an associated tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifAssociatedTunnelIndex, cienaCesMplsNotifAssociatedTunnelType, cienaCesMplsNotifAssociatedTunnelName, cienaCesMplsNotifAssociatedTunnelAdminState, cienaCesMplsNotifAssociatedTunnelOperState, cienaCesMplsNotifAssociatedTunnelOamFaulted, cienaCesMplsNotifAssociatedTunnelFaultedNodeId.
1.3.6.1.4.1.1271.2.2.17.0.6current
cienaCesMplsCacInterfaceThresholdTrap
NOTIFICATION-TYPE
This notification is sent when LSP bandwith usage exceeds the threshold. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifCasInterfaceIndex, cienaCesMplsNotifCacInterfaceClassType, cienaCesMplsNotifCacInterfaceName, cienaCesMplsNotifCacInterfaceThreshold.
1.3.6.1.4.1.1271.2.2.17.0.7current
cienaCesGmplsEncapUnidirTunnelOperStateChgTrap
NOTIFICATION-TYPE
This notification is sent when the operational state of an encap uni-direction tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelAdminState, cienaCesGmplsNotifEncapTunnelOperState, cienaCesGmplsNotifEncapTunnelOamFaulted, cienaCesGmplsNotifEncapTunnelFaultedNodeId.
1.3.6.1.4.1.1271.2.2.17.1.1current
cienaCesGmplsEncapCoroutedTunnelOperStateChgTrap
NOTIFICATION-TYPE
This notification is sent when the operational state of an encap corouted tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelAdminState, cienaCesGmplsNotifEncapTunnelOperState, cienaCesGmplsNotifEncapTunnelOamFaulted, cienaCesGmplsNotifEncapTunnelFaultedNodeId.
1.3.6.1.4.1.1271.2.2.17.1.2current
cienaCesGmplsDecapCoroutedTunnelOperStateChgTrap
NOTIFICATION-TYPE
This notification is sent when the operational state of an decap corouted tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifDecapTunnelIndex, cienaCesGmplsNotifDecapTunnelType, cienaCesGmplsNotifDecapTunnelName, cienaCesGmplsNotifDecapTunnelAdminState, cienaCesGmplsNotifDecapTunnelOperState, cienaCesGmplsNotifDecapTunnelOamFaulted, cienaCesGmplsNotifDecapTunnelFaultedNodeId.
1.3.6.1.4.1.1271.2.2.17.1.3current
cienaCesGmplsTransitUnidirTunnelOperStateChgTrap
NOTIFICATION-TYPE
This notification is sent when the operational state of a transit uni-direcition tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifTransitTunnelIndex, cienaCesGmplsNotifTransitTunnelType, cienaCesGmplsNotifTransitTunnelName, cienaCesGmplsNotifTransitTunnelAdminState, cienaCesGmplsNotifTransitTunnelOperState, cienaCesGmplsNotifTransitTunnelOamFaulted.
1.3.6.1.4.1.1271.2.2.17.1.4current
cienaCesGmplsTransitCoroutedTunnelOperStateChgTrap
NOTIFICATION-TYPE
This notification is sent when the operational state of a transit corouted tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifTransitTunnelIndex, cienaCesGmplsNotifTransitTunnelType, cienaCesGmplsNotifTransitTunnelName, cienaCesGmplsNotifTransitTunnelAdminState, cienaCesGmplsNotifTransitTunnelOperState, cienaCesGmplsNotifTransitTunnelOamFaulted.
1.3.6.1.4.1.1271.2.2.17.1.5current
cienaCesGmplsEncapUnidirTunnelGrpActiveEncapTunnelChangeTrap
NOTIFICATION-TYPE
This notification is sent whenever the active encap tunnel in an encap uni-direction tunnel group changes.
1.3.6.1.4.1.1271.2.2.17.1.6current
cienaCesGmplsEncapCoroutedTunnelGrpActiveEncapTunnelChangeTrap
NOTIFICATION-TYPE
This notification is sent whenever the active encap tunnel in an encap corouted tunnel group changes.
1.3.6.1.4.1.1271.2.2.17.1.7current
cienaCesGmplsDecapCoroutedTunnelGrpActiveDecapTunnelChangeTrap
NOTIFICATION-TYPE
This notification is sent whenever the active decap tunnel in a decap corouted tunnel group changes.
1.3.6.1.4.1.1271.2.2.17.1.8current
cienaCesGmplsAssociatedTunnelOperStateChgTrap
NOTIFICATION-TYPE
This notification is sent when the operational state of an encap tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifAssociatedTunnelIndex, cienaCesGmplsNotifAssociatedTunnelType, cienaCesGmplsNotifAssociatedTunnelName, cienaCesGmplsNotifAssociatedTunnelAdminState, cienaCesGmplsNotifAssociatedTunnelOperState, cienaCesGmplsNotifAssociatedTunnelOamFaulted, cienaCesGmplsNotifAssociatedTunnelFaultedNodeId.
1.3.6.1.4.1.1271.2.2.17.1.9current
cienaCesGmplsEncapCoroutedTunnelAisFaultStateChgTrap
NOTIFICATION-TYPE
This notification is obsoleted, its functionality is absorbed in the OperState Change notification.
1.3.6.1.4.1.1271.2.2.17.1.10obsolete
cienaCesGmplsDecapCoroutedTunnelAisFaultStateChgTrap
NOTIFICATION-TYPE
This notification is obsoleted, its functionality is absorbed in the OperState Change notification.
1.3.6.1.4.1.1271.2.2.17.1.11obsolete
cienaCesGmplsAssociatedTunnelAisFaultStateChgTrap
NOTIFICATION-TYPE
This notification is obsoleted, its functionality is absorbed in the OperState Change notification.
1.3.6.1.4.1.1271.2.2.17.1.12obsolete
cienaCesGmplsTunnelAisFaultErrorTrap
NOTIFICATION-TYPE
This notification is sent when there is a fault sent for a LSP whose label is not associated with any tunnel. This will happen whenever the AIS admin state is disabled for the bidirectional tunnel. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifTunnelDecapLabel, and cienaCesGmplsNotifTunnelErrorMsg
1.3.6.1.4.1.1271.2.2.17.1.13current
cienaCesGmplsEncapTunnelResizeResultTrap
NOTIFICATION-TYPE
This notification is sent when the encap tunnel auto size is done Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelResult, cienaCesGmplsNotifEncapTunnelProtectionRole, cienaCesGmplsNotifEncapTunnelRequestdBw and cienaCesGmplsNotifEncapTunnelOperationalBw.
1.3.6.1.4.1.1271.2.2.17.1.14current
cienaCesGmplsEncapTunnelMbbResultTrap
NOTIFICATION-TYPE
This notification is sent when the encap tunnel MBB done Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelResult, cienaCesGmplsNotifEncapTunnelProtectionRole, cienaCesGmplsNotifEncapTunnelRequestdBw and cienaCesGmplsNotifEncapTunnelOperationalBw, cienaCesGmplsNotifEncapTunnelMbbParentApp.
1.3.6.1.4.1.1271.2.2.17.1.15current
cienaCesMplsPwDown
NOTIFICATION-TYPE
This notification is sent when the operational state of a pseudowire has changed from up to down.
1.3.6.1.4.1.1271.2.2.17.2.1current
cienaCesMplsPwUp
NOTIFICATION-TYPE
This notification is sent when the operational state of a pseudowire has changed from down to up.
1.3.6.1.4.1.1271.2.2.17.2.2current
cienaCesMplsPwBundleActivePwChange
NOTIFICATION-TYPE
This notification is sent when the active member of the pseudowire bundle has changed.
1.3.6.1.4.1.1271.2.2.17.2.3current