MIBs Depot

CIENA-CES-DHCPV6-CLIENT-MIB

Registered at
1.3.6.1.4.1.1271.2.1.30
1.3.6.1.4.1.1271.2.2.30
Last updated
2016-06-21 00:00
Organization
Ciena, Inc
Revisions
2016-06-21 00:00, 2016-01-19 00:00, 2015-11-02 00:00, 2015-08-06 00:00, 2013-10-17 00:00, 2013-09-24 00:00, 2013-07-19 00:00, 2013-02-11 19:00, 2013-02-11 00:00, 2013-02-08 00:00, 2012-11-15 00:00
Namespace
ciena
Source file
CIENA-CES-DHCPV6-CLIENT-MIB
Digest
sha256:87e4eac466d718003deef5951c21a83366f92635d193961c32c4059c3dabcd92

Description

The MIB module to manage DHCPv6 client on Ciena CES products.

Contact

Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com

Imports

FromSymbols
CIENA-SMIcienaCesConfig, cienaCesNotifications
CIENA-TCCienaGlobalState, CienaStatsClear
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CIENA-CES-DHCPV6-CLIENT-MIB
CIENA-SMI
CIENA-TC
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
cienaCesDhcpv6ClientMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.30.1
cienaCesDhcpv6Client
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.30.1.1
cienaCesDhcpv6AdminState
OBJECT-TYPE
This object indicates if the DHCPv6 client is administratively enabled.
1.3.6.1.4.1.1271.2.1.30.1.1.1CienaGlobalStateread-onlycurrent
cienaCesDhcpv6IfName
OBJECT-TYPE
The interface associated with the DHCPV6 client.
1.3.6.1.4.1.1271.2.1.30.1.1.2DisplayString (SIZE(0..32))read-onlycurrent
cienaCesDhcpv6RapidCommitState
OBJECT-TYPE
This object indicates if rapid commit option is enabled on the DHCPv6 client.
1.3.6.1.4.1.1271.2.1.30.1.1.3CienaGlobalStateread-onlycurrent
cienaCesDhcpv6PrefLifetimeReq
OBJECT-TYPE
The requested preferred lifetime for the IPv6 address expressed in seconds.
1.3.6.1.4.1.1271.2.1.30.1.1.5Integer32 (0..2147483647)read-onlycurrent
cienaCesDhcpv6ValidLifetimeReq
OBJECT-TYPE
The requested valid lifetime for the IPv6 address expressed in seconds.
1.3.6.1.4.1.1271.2.1.30.1.1.6Integer32 (0..2147483647)read-onlycurrent
cienaCesDhcpv6ClientOptionTable
OBJECT-TYPE
List of options supported by the DHCPv6 client.
1.3.6.1.4.1.1271.2.1.30.1.1.7not-accessiblecurrent
cienaCesDhcpv6ClientOptionEntry
OBJECT-TYPE
An entry containing list of options supported by DHCPv6 client.
1.3.6.1.4.1.1271.2.1.30.1.1.7.1not-accessiblecurrent
cienaCesDhcpv6OptionCodeIndex
OBJECT-TYPE
Specifies the index used for this entry.
1.3.6.1.4.1.1271.2.1.30.1.1.7.1.1Integer32 (1..65535)not-accessiblecurrent
cienaCesDhcpv6OptionDesc
OBJECT-TYPE
Specifies the description for the given DHCPv6 option code.
1.3.6.1.4.1.1271.2.1.30.1.1.7.1.2DisplayStringread-onlycurrent
cienaCesDhcpv6OptionCode
OBJECT-TYPE
Specifies the option code specified by RFC specification.
1.3.6.1.4.1.1271.2.1.30.1.1.7.1.3Integer32 (0..2147483647)read-onlycurrent
cienaCesDhcpv6OptionState
OBJECT-TYPE
Specifies if the given option is enabled/disabled.
1.3.6.1.4.1.1271.2.1.30.1.1.7.1.4CienaGlobalStateread-onlycurrent
cienaCesDhcpv6ClientSessTable
OBJECT-TYPE
List of active DHCPv6 client sessions.
1.3.6.1.4.1.1271.2.1.30.1.1.8not-accessiblecurrent
cienaCesDhcpv6ClientSessEntry
OBJECT-TYPE
An entry in the cienaCesDhcpv6ClientSessTable.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1not-accessiblecurrent
cienaCesDhcpv6ClientSessMgmtIntfIndex
OBJECT-TYPE
The mgmt interface index.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.1Integer32 (1..65535)not-accessiblecurrent
cienaCesDhcpv6ClientSessState
OBJECT-TYPE
The DHCPv6 client state of this session.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.2INTEGER {disabled(1), init(2), bound(3), renewing(4), rebinding(5), solicit(6), request(7), reconfigure(8), unknown(99)}read-onlycurrent
cienaCesDhcpv6ClientSessAutoConfigState
OBJECT-TYPE
The DHCPv6 autoconfiguration state of this session set by the router advertisement.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.3INTEGER {none(1), stateless(2), stateful(3), unknown(99)}read-onlycurrent
cienaCesDhcpv6ClientSessUpTime
OBJECT-TYPE
The total length of time that this session has had active lease(s).
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.4Integer32read-onlycurrent
cienaCesDhcpv6ClientSessPrefLifetime
OBJECT-TYPE
The preferred lifetime in seconds of the current lease.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.5Integer32read-onlycurrent
cienaCesDhcpv6ClientSessValidLifetime
OBJECT-TYPE
The valid lifetime in seconds of the current lease.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.6Integer32read-onlycurrent
cienaCesDhcpv6ClientSessLeaseExpire
OBJECT-TYPE
The remaining seconds until the current lease expires.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.7Integer32read-onlycurrent
cienaCesDhcpv6ClientSessClientId
OBJECT-TYPE
The full 'client ID' value associated with this lease.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.8DisplayStringread-onlycurrent
cienaCesDhcpv6ClientSessServerIpAddrType
OBJECT-TYPE
The IP address type (IPv6) of the server from which this lease was obtained.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.9InetAddressTyperead-onlycurrent
cienaCesDhcpv6ClientSessServerIpAddr
OBJECT-TYPE
The IP address of the server from which this lease was obtained.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.10InetAddressread-onlycurrent
cienaCesDhcpv6ClientSessServerId
OBJECT-TYPE
The full 'server ID' value associated with this lease.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.11DisplayStringread-onlycurrent
cienaCesDhcpv6ClientSessT1Time
OBJECT-TYPE
The lease renewal (T1) time in seconds.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.12Integer32read-onlycurrent
cienaCesDhcpv6ClientSessT2Time
OBJECT-TYPE
The lease rebind (T2) time in seconds.
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.13Integer32read-onlycurrent
cienaCesDhcpv6ClientSessStatsTable
OBJECT-TYPE
The (conceptual) table listing the statistics for DHCPv6 per interface
1.3.6.1.4.1.1271.2.1.30.1.1.9not-accessiblecurrent
cienaCesDhcpv6ClientSessStatsEntry
OBJECT-TYPE
An entry (conceptual row) in the cienaCesDhcpv6ClientSessStatsTable.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1not-accessiblecurrent
cienaCesDhcpv6ClientSessStatsMgmtIntfIndex
OBJECT-TYPE
The mgmt interface index.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.1Integer32 (1..65535)not-accessiblecurrent
cienaCesDhcpv6ClientSessStatsClear
OBJECT-TYPE
This object clears the DHCPv6 session statistics.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.2CienaStatsClearread-writecurrent
cienaCesDhcpv6ClientSessStatsPktsRx
OBJECT-TYPE
The number of DHCPv6 packets received by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.3Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsReply
OBJECT-TYPE
The number of DHCPv6 reply messages received by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.4Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsAdvert
OBJECT-TYPE
The number of DHCPv6 advertise messages received by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.5Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsRecfg
OBJECT-TYPE
The number of DHCPv6 reconfigure messages received by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.6Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsInvalid
OBJECT-TYPE
The number of DHCPv6 invalid messages received by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.7Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsPktsTx
OBJECT-TYPE
The number of DHCPv6 messages sent by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.8Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsSolicit
OBJECT-TYPE
The number of DHCPv6 solicit messages sent by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.9Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsRequest
OBJECT-TYPE
The number of DHCPv6 request messages sent by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.10Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsConfirm
OBJECT-TYPE
The number of DHCPv6 confirm messages sent by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.11Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsRenew
OBJECT-TYPE
The number of DHCPv6 renew messages sent by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.12Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsRebind
OBJECT-TYPE
The number of DHCPv6 rebind messages sent by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.13Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsInfoReq
OBJECT-TYPE
The number of DHCPv6 information request messages sent by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.14Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsRelease
OBJECT-TYPE
The number of DHCPv6 release messages sent by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.15Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsDecline
OBJECT-TYPE
The number of DHCPv6 decline messages sent by the client.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.16Gauge32read-onlycurrent
cienaCesDhcpv6ClientSessStatsTxFail
OBJECT-TYPE
The number of DHCPv6 messages the client was unable to send.
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.17Gauge32read-onlycurrent
cienaCesDhcpv6RelayAgent
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.30.1.2
cienaCesDhcpv6RelayAgentGlobalAttrs
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.30.1.2.1
cienaCesDhcpv6LdraState
OBJECT-TYPE
Specifies the global state of the Lightweight DHCPv6 Relay Agent.
1.3.6.1.4.1.1271.2.1.30.1.2.1.1CienaGlobalStateread-writecurrent
cienaCesDhcpv6LdraInterfaceId
OBJECT-TYPE
Specifies the type of data to use in the InterfaceID option of LDRA messages.
1.3.6.1.4.1.1271.2.1.30.1.2.1.2INTEGER {slotAndPort(1), slotAndPortAndVlan(2), intidString(3)}read-writecurrent
cienaCesDhcpv6LdraRemoteId
OBJECT-TYPE
Specifies the type of data to use in the RemoteID option of LDRA messages.
1.3.6.1.4.1.1271.2.1.30.1.2.1.3INTEGER {macAddress(1), hostName(2), ridString(3)}read-writecurrent
cienaCesDhcpv6LdraRemoteIdOption
OBJECT-TYPE
If on, the RemoteID option will be added to client messages being relayed by LDRA.
1.3.6.1.4.1.1271.2.1.30.1.2.1.4INTEGER {on(1), off(2)}read-writecurrent
cienaCesDhcpv6LdraRemoteIdEnterpriseNo
OBJECT-TYPE
If the RemoteID option is on, this value will be used as the Enterprise Number in the RemoteID option field. Uses Broadband Forum value 3561 as default
1.3.6.1.4.1.1271.2.1.30.1.2.1.5Unsigned32 (1..4294967295)read-writecurrent
cienaCesDhcpv6LdraForward
OBJECT-TYPE
This object specifies the number of DHCPv6 packets forwarded rather than relayed. These are valid DHCPv6 frames that don't have a defined relay.
1.3.6.1.4.1.1271.2.1.30.1.2.1.6Counter32read-onlycurrent
cienaCesDhcpv6LdraRelayed
OBJECT-TYPE
This object specifies the number of DHCPv6 packets processed by the LDRA and not dropped.
1.3.6.1.4.1.1271.2.1.30.1.2.1.7Counter32read-onlycurrent
cienaCesDhcpv6LdraDropped
OBJECT-TYPE
This object specifies the number of DHCPv6 packets processed by the LDRA and dropped. Inspect the detailed statistics on each relay for more details related to dropped packets.
1.3.6.1.4.1.1271.2.1.30.1.2.1.8Counter32read-onlycurrent
cienaCesDhcpv6LdraGlobalStatsClear
OBJECT-TYPE
This object when set to 'clear(1)', clears the global DHCPv6 LDRA stats.
1.3.6.1.4.1.1271.2.1.30.1.2.1.9CienaStatsClearread-writecurrent
cienaCesDhcpv6LdraNotForRelay
OBJECT-TYPE
This object specifies the number of DHCPv6 packets passed to the relay, but were determined to not belong to the relay. The packets are dropped.
1.3.6.1.4.1.1271.2.1.30.1.2.1.10Counter32read-onlycurrent
cienaCesDhcpv6LdraStateTable
OBJECT-TYPE
Table allows changing configuration of DHCPv6 LDRA functionality for each cienaCesDhcpv6LdraVlan.
1.3.6.1.4.1.1271.2.1.30.1.2.2not-accessiblecurrent
cienaCesDhcpv6LdraStateEntry
OBJECT-TYPE
Entry in the table to configure DHCPv6 LDRA functionality.
1.3.6.1.4.1.1271.2.1.30.1.2.2.1not-accessiblecurrent
cienaCesDhcpv6LdraVlan
OBJECT-TYPE
This object specifies the VLAN on which DHCPv6 LDRA is configured.
1.3.6.1.4.1.1271.2.1.30.1.2.2.1.1Integer32 (1..24576)not-accessiblecurrent
cienaCesDhcpv6LdraAdminState
OBJECT-TYPE
This object allows the user to disable or enable DHCPv6 LDRA functionality on the given VLAN specified by cienaCesDhcpv6LdraVlan.
1.3.6.1.4.1.1271.2.1.30.1.2.2.1.2CienaGlobalStateread-createcurrent
cienaCesDhcpv6LdraOperState
OBJECT-TYPE
This object shows the operational status of the DHCPv6 LDRA on given VLAN.
1.3.6.1.4.1.1271.2.1.30.1.2.2.1.3CienaGlobalStateread-onlycurrent
cienaCesDhcpv6LdraRowStatus
OBJECT-TYPE
Set this object to 'Destroy' to terminate DHCPv6 LDRA Relaying on the VLAN specified by cienaCesDhcpv6LdraVlan. Set this object to 'CreateAndGo' to enable DHCPv6 LDRA Relaying on the VLAN specified by cienaCesDhcpv6LdraVlan.
1.3.6.1.4.1.1271.2.1.30.1.2.2.1.4RowStatusread-createcurrent
cienaCesDhcpv6LdraTrustTable
OBJECT-TYPE
This table is used to specify the slot / ports and VLANs that the DHCPv6 LDRA can trust. This table has been deprecated in favor of the cienaCesDhcpv6LdraExtTrustTable which adds a column for port status.
1.3.6.1.4.1.1271.2.1.30.1.2.3not-accessibledeprecated
cienaCesDhcpv6LdraTrustEntry
OBJECT-TYPE
Each entry in this table is used to specify the slot / port and VLAN to be trusted.
1.3.6.1.4.1.1271.2.1.30.1.2.3.1not-accessibledeprecated
cienaCesDhcpv6LdraPort
OBJECT-TYPE
This object is used as an index in the table and is used to specify the port.
1.3.6.1.4.1.1271.2.1.30.1.2.3.1.1Integer32 (1..65535)not-accessiblecurrent
cienaCesDhcpv6LdraTrustMode
OBJECT-TYPE
This object is used to set the port as client trusted, server trusted or not trusted. Note that the client(1) mode is deprecated. That value will never be returned. Setting that value will set the mode to clientTrust(2) instead.
1.3.6.1.4.1.1271.2.1.30.1.2.3.1.2INTEGER {client(1), clientTrust(2), serverTrust(3), dualRoleTrust(4), unTrust(5)}read-createdeprecated
cienaCesDhcpv6LdraStatsTable
OBJECT-TYPE
Table to display L2 statistics for each cienaCesDhcpv6LdraVlan.
1.3.6.1.4.1.1271.2.1.30.1.2.4not-accessiblecurrent
cienaCesDhcpv6LdraStatsEntry
OBJECT-TYPE
Entry in the table to display LDRA stats.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1not-accessiblecurrent
cienaCesDhcpv6LdraPktsForRelay
OBJECT-TYPE
This object specifies the number of packets sent to this relay process.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.1Counter32read-onlycurrent
cienaCesDhcpv6LdraRelayedClient
OBJECT-TYPE
This object specifies the number of client sourced DHCPv6 packets relayed.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.2Counter32read-onlycurrent
cienaCesDhcpv6LdraRelayedServer
OBJECT-TYPE
This object specifies the number of server sourced DHCPv6 packets relayed.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.3Counter32read-onlycurrent
cienaCesDhcpv6LdraUntrustedClientPortPktsRx
OBJECT-TYPE
This object specifies the number of client DHCPv6 packets dropped because they were received on untrusted client ports.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.4Counter32read-onlycurrent
cienaCesDhcpv6LdraUntrustedServerPortPktsRx
OBJECT-TYPE
This object specifies the number of server DHCPv6 packets dropped because they were received on untrusted server ports.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.5Counter32read-onlycurrent
cienaCesDhcpv6LdraFailedValidationPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to failed validation.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.6Counter32read-onlycurrent
cienaCesDhcpv6LdraInvalidConfigPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to LDRA configuration issues.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.7Counter32read-onlycurrent
cienaCesDhcpv6LdraExceededHopCountPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to hop count in the packet exceeding hop count the limit.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.8Counter32read-onlycurrent
cienaCesDhcpv6LdraExceedMTUPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped because the new relay frame size would exceed the MTU.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.9Counter32read-onlycurrent
cienaCesDhcpv6LdraNoTrustedServerPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped because there are no server trusted ports configured.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.10Counter32read-onlycurrent
cienaCesDhcpv6LdraNoTrustedClientPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped because there are no client trusted ports configured.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.11Counter32read-onlycurrent
cienaCesDhcpv6LdraIPv6FragBadExtHdrPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to IPv6 packet extension headers that could not be processed.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.12Counter32read-onlycurrent
cienaCesDhcpv6LdraGeneralErrors
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to unclassified errors.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.13Counter32read-onlycurrent
cienaCesDhcpv6LdraStatsClear
OBJECT-TYPE
This object when set to 'true', clears DHCPv6 LDRA stats for given VLAN.
1.3.6.1.4.1.1271.2.1.30.1.2.4.1.14CienaStatsClearread-writecurrent
cienaCesDhcpv6LdraIntidStringTable
OBJECT-TYPE
This table is used to specify CID strings for slot / ports and VLANs that the DHCP relay agent can specify in Option 82 CID information.
1.3.6.1.4.1.1271.2.1.30.1.2.5not-accessiblecurrent
cienaCesDhcpv6LdraIntidStringEntry
OBJECT-TYPE
Each entry in this table is used to specify an interface id string for slot / port and VLAN combinations.
1.3.6.1.4.1.1271.2.1.30.1.2.5.1not-accessiblecurrent
cienaCesDhcpv6LdraIntidStringPort
OBJECT-TYPE
This object is used as an index in the table and is used to specify the port.
1.3.6.1.4.1.1271.2.1.30.1.2.5.1.1Integer32 (1..65535)not-accessiblecurrent
cienaCesDhcpv6LdraIntidString
OBJECT-TYPE
This object is used to get and set the IntID string for the port.
1.3.6.1.4.1.1271.2.1.30.1.2.5.1.2DisplayString (SIZE(1..64))read-createcurrent
cienaCesDhcpv6LdraIntidStringRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
1.3.6.1.4.1.1271.2.1.30.1.2.5.1.3RowStatusread-createcurrent
cienaCesDhcpv6LdraRidStringTable
OBJECT-TYPE
This table is used to specify RID strings for slot / ports and VLANs that the DHCP relay agent can specify in Option 82 RID information.
1.3.6.1.4.1.1271.2.1.30.1.2.6not-accessiblecurrent
cienaCesDhcpv6LdraRidStringEntry
OBJECT-TYPE
Each entry in this table is used to specify an RID string for slot / port and VLAN combinations.
1.3.6.1.4.1.1271.2.1.30.1.2.6.1not-accessiblecurrent
cienaCesDhcpv6LdraRidStringPort
OBJECT-TYPE
This MIB object is used as an index in the table and is used to specify the port.
1.3.6.1.4.1.1271.2.1.30.1.2.6.1.1Integer32 (1..65535)not-accessiblecurrent
cienaCesDhcpv6LdraRidString
OBJECT-TYPE
This MIB object is used to get and set the RID string for the port.
1.3.6.1.4.1.1271.2.1.30.1.2.6.1.2DisplayString (SIZE(1..64))read-createcurrent
cienaCesDhcpv6LdraRidStringRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
1.3.6.1.4.1.1271.2.1.30.1.2.6.1.3RowStatusread-createcurrent
cienaCesDhcpv6LdraExtTrustTable
OBJECT-TYPE
This table is used to specify the ports and VLANs that the DHCPv6 LDRA can trust. This table is the same as cienaCesDhcpv6LdraTrustTable with the addition of a column for the port status.
1.3.6.1.4.1.1271.2.1.30.1.2.7not-accessiblecurrent
cienaCesDhcpv6LdraExtTrustEntry
OBJECT-TYPE
Each entry in this table is used to specify the port and VLAN to be trusted.
1.3.6.1.4.1.1271.2.1.30.1.2.7.1not-accessiblecurrent
cienaCesDhcpv6LdraExtPortState
OBJECT-TYPE
This object reports whether the specified port is active or inactive.
1.3.6.1.4.1.1271.2.1.30.1.2.7.1.1INTEGER {active(1), inactive(2)}read-onlycurrent
cienaCesDhcpv6LdraExtTrustMode
OBJECT-TYPE
This object is used to set the port as client trusted, server trusted or not trusted. Note that the client(1) mode is deprecated. That value will never be returned. Setting that value will set the mode to clientTrust(2) instead.
1.3.6.1.4.1.1271.2.1.30.1.2.7.1.2INTEGER {client(1), clientTrust(2), serverTrust(3), dualRoleTrust(4), unTrust(5)}read-createcurrent
cienaCesDhcpv6LdraVsStateTable
OBJECT-TYPE
Table allows changing configuration of DHCPv6 LDRA functionality for each VS.
1.3.6.1.4.1.1271.2.1.30.1.2.8not-accessiblecurrent
cienaCesDhcpv6LdraVsStateEntry
OBJECT-TYPE
Entry in the table to configure DHCPv6 LDRA functionality.
1.3.6.1.4.1.1271.2.1.30.1.2.8.1not-accessiblecurrent
cienaCesDhcpv6LdraVsVlan
OBJECT-TYPE
This object specifies the VS VLAN on which the DHCPv6 LDRA is configured.
1.3.6.1.4.1.1271.2.1.30.1.2.8.1.1Integer32 (1..24576)not-accessiblecurrent
cienaCesDhcpv6LdraVsName
OBJECT-TYPE
This object shows the name of the VS VLAN on which the DHCPv6 LDRA is configured.
1.3.6.1.4.1.1271.2.1.30.1.2.8.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesDhcpv6LdraVsAdminState
OBJECT-TYPE
This object allows the user to disable or enable DHCPv6 LDRA functionality on the given VS VLAN specified by cienaCesDhcpv6LdraVsVlan.
1.3.6.1.4.1.1271.2.1.30.1.2.8.1.3CienaGlobalStateread-createcurrent
cienaCesDhcpv6LdraVsOperState
OBJECT-TYPE
This object shows the operational status of the DHCPv6 LDRA on the given VS VLAN.
1.3.6.1.4.1.1271.2.1.30.1.2.8.1.4CienaGlobalStateread-onlycurrent
cienaCesDhcpv6LdraVsRowStatus
OBJECT-TYPE
Set this object to 'Destroy' to terminate DHCPv6 LDRA Relaying on the VS VLAN specified by cienaCesDhcpv6LdraVsVlan. Set this object to 'CreateAndGo' to enable DHCPv6 LDRA Relaying on the VS VLAN specified by cienaCesDhcpv6LdraVsVlan.
1.3.6.1.4.1.1271.2.1.30.1.2.8.1.5RowStatusread-createcurrent
cienaCesDhcpv6LdraVsTrustTable
OBJECT-TYPE
This table is used to specify the VLANs, ports and sub-VLANs that the DHCPv6 LDRA can trust.
1.3.6.1.4.1.1271.2.1.30.1.2.9not-accessiblecurrent
cienaCesDhcpv6LdraVsTrustEntry
OBJECT-TYPE
Each entry in this table is used to specify the VLAN, port and sub-VLAN to be trusted.
1.3.6.1.4.1.1271.2.1.30.1.2.9.1not-accessiblecurrent
cienaCesDhcpv6LdraVsPort
OBJECT-TYPE
This object is used as an index in the table and is used to specify the VS port.
1.3.6.1.4.1.1271.2.1.30.1.2.9.1.1Integer32 (1..65535)not-accessiblecurrent
cienaCesDhcpv6LdraVsSubVlan
OBJECT-TYPE
This object specifies the sub-VLAN on which the DHCPv6 LDRA is configured. Note that the special value 0 means that no sub-VLAN is associated with this particular trust entry.
1.3.6.1.4.1.1271.2.1.30.1.2.9.1.2Integer32 (0..24576)not-accessiblecurrent
cienaCesDhcpv6LdraVsPortState
OBJECT-TYPE
This object reports whether the specified port and sub-VLAN is active or inactive.
1.3.6.1.4.1.1271.2.1.30.1.2.9.1.3INTEGER {active(1), inactive(2)}read-onlycurrent
cienaCesDhcpv6LdraVsTrustMode
OBJECT-TYPE
This object is used to set the port and sub-VLAN as client trusted, server trusted or not trusted. Note that the client(1) mode is deprecated. That value will never be returned. Setting that value will set the mode to clientTrust(2) instead.
1.3.6.1.4.1.1271.2.1.30.1.2.9.1.4INTEGER {client(1), clientTrust(2), serverTrust(3), dualRoleTrust(4), unTrust(5)}read-writecurrent
cienaCesDhcpv6LdraVsStatsTable
OBJECT-TYPE
Table to display VS statistics for each VS LDRA.
1.3.6.1.4.1.1271.2.1.30.1.2.10not-accessiblecurrent
cienaCesDhcpv6LdraVsStatsEntry
OBJECT-TYPE
Entry in the table to display VS LDRA statistics.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1not-accessiblecurrent
cienaCesDhcpv6LdraVsPktsForRelay
OBJECT-TYPE
This object specifies the number of packets sent to this relay process.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.1Counter32read-onlycurrent
cienaCesDhcpv6LdraVsRelayedClient
OBJECT-TYPE
This object specifies the number of client sourced DHCPv6 packets relayed.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.2Counter32read-onlycurrent
cienaCesDhcpv6LdraVsRelayedServer
OBJECT-TYPE
This object specifies the number of server sourced DHCPv6 packets relayed.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.3Counter32read-onlycurrent
cienaCesDhcpv6LdraVsUntrustedClientPortPktsRx
OBJECT-TYPE
This object specifies the number of client DHCPv6 packets dropped because they were received on untrusted client ports.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.4Counter32read-onlycurrent
cienaCesDhcpv6LdraVsUntrustedServerPortPktsRx
OBJECT-TYPE
This object specifies the number of server DHCPv6 packets dropped because they were received on untrusted server ports.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.5Counter32read-onlycurrent
cienaCesDhcpv6LdraVsFailedValidationPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to failed validation.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.6Counter32read-onlycurrent
cienaCesDhcpv6LdraVsInvalidConfigPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to LDRA configuration issues.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.7Counter32read-onlycurrent
cienaCesDhcpv6LdraVsExceededHopCountPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to hop count in the packet exceeding hop count the limit.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.8Counter32read-onlycurrent
cienaCesDhcpv6LdraVsExceedMTUPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped because the new relay frame size would exceed the MTU.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.9Counter32read-onlycurrent
cienaCesDhcpv6LdraVsNoTrustedServerPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped because there are no server trusted ports configured.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.10Counter32read-onlycurrent
cienaCesDhcpv6LdraVsNoTrustedClientPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped because there are no client trusted ports configured.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.11Counter32read-onlycurrent
cienaCesDhcpv6LdraVsIPv6FragBadExtHdrPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to IPv6 packet extension headers that could not be processed.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.12Counter32read-onlycurrent
cienaCesDhcpv6LdraVsGeneralErrors
OBJECT-TYPE
This object reports the number of DHCPv6 packets dropped due to unclassified errors.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.13Counter32read-onlycurrent
cienaCesDhcpv6LdraVsStatsClear
OBJECT-TYPE
This object when set to 'true', clears DHCPv6 LDRA stats for given VLAN.
1.3.6.1.4.1.1271.2.1.30.1.2.10.1.14CienaStatsClearread-writecurrent
cienaCesDhcpv6LdraVsIntidStringTable
OBJECT-TYPE
This table is used to specify CID strings for VS ports and VLANs that the LDRA can specify in Option 82 CID information.
1.3.6.1.4.1.1271.2.1.30.1.2.11not-accessiblecurrent
cienaCesDhcpv6LdraVsIntidStringEntry
OBJECT-TYPE
Each entry in this table is used to specify an interface ID string for VS port and VLAN combinations.
1.3.6.1.4.1.1271.2.1.30.1.2.11.1not-accessiblecurrent
cienaCesDhcpv6LdraVsIntidString
OBJECT-TYPE
This object is used to get and set the IntID string for the port.
1.3.6.1.4.1.1271.2.1.30.1.2.11.1.1DisplayString (SIZE(1..64))read-createcurrent
cienaCesDhcpv6LdraVsIntidStringRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
1.3.6.1.4.1.1271.2.1.30.1.2.11.1.2RowStatusread-createcurrent
cienaCesDhcpv6LdraVsRidStringTable
OBJECT-TYPE
This table is used to specify RID strings for VS ports and VLANs that the DHCPv6 LDRA can specify in Option 82 RID information.
1.3.6.1.4.1.1271.2.1.30.1.2.12not-accessiblecurrent
cienaCesDhcpv6LdraVsRidStringEntry
OBJECT-TYPE
Each entry in this table is used to specify an RID string for VS port and VLAN combinations.
1.3.6.1.4.1.1271.2.1.30.1.2.12.1not-accessiblecurrent
cienaCesDhcpv6LdraVsRidString
OBJECT-TYPE
This MIB object is used to get and set the RID string for the port.
1.3.6.1.4.1.1271.2.1.30.1.2.12.1.1DisplayString (SIZE(1..64))read-createcurrent
cienaCesDhcpv6LdraVsRidStringRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
1.3.6.1.4.1.1271.2.1.30.1.2.12.1.2RowStatusread-createcurrent
cienaCesDhcpv6LdraMplsStateTable
OBJECT-TYPE
Table allows changing configuration of DHCPv6 LDRA functionality for each MPLS VS.
1.3.6.1.4.1.1271.2.1.30.1.2.13not-accessiblecurrent
cienaCesDhcpv6LdraMplsStateEntry
OBJECT-TYPE
Entry in the table to configure DHCPv6 LDRA functionality.
1.3.6.1.4.1.1271.2.1.30.1.2.13.1not-accessiblecurrent
cienaCesDhcpv6LdraMplsId
OBJECT-TYPE
This object specifies the MPLS VS on which DHCPv6 LDRA is configured.
1.3.6.1.4.1.1271.2.1.30.1.2.13.1.1Unsigned32 (1..1677215)not-accessiblecurrent
cienaCesDhcpv6LdraMplsName
OBJECT-TYPE
This object shows the name of the MPLS VS on which DHCPv6 LDRA is configured.
1.3.6.1.4.1.1271.2.1.30.1.2.13.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesDhcpv6LdraMplsAdminState
OBJECT-TYPE
This object allows the user to disable or enable DHCPv6 LDRA functionality on the given MPLS VS specified by cienaCesDhcpv6LdraMplsId.
1.3.6.1.4.1.1271.2.1.30.1.2.13.1.3CienaGlobalStateread-createcurrent
cienaCesDhcpv6LdraMplsOperState
OBJECT-TYPE
This object shows the operational status of the DHCPv6 LDRA on the given MPLS VS.
1.3.6.1.4.1.1271.2.1.30.1.2.13.1.4CienaGlobalStateread-onlycurrent
cienaCesDhcpv6LdraMplsRowStatus
OBJECT-TYPE
Set this object to 'Destroy' to terminate DHCPv6 LDRA Relaying on the MPLS VS specified by cienaCesDhcpv6LdraMplsId. Set this object to 'CreateAndGo' to enable DHCPv6 LDRA Relaying on the MPLS VS specified by cienaCesDhcpv6LdraMplsId.
1.3.6.1.4.1.1271.2.1.30.1.2.13.1.5RowStatusread-createcurrent
cienaCesDhcpv6LdraMplsTrustTable
OBJECT-TYPE
This table is used to specify the MPLS VSs and interfaces that the DHCPv6 LDRA can trust.
1.3.6.1.4.1.1271.2.1.30.1.2.14not-accessiblecurrent
cienaCesDhcpv6LdraMplsTrustEntry
OBJECT-TYPE
Each entry in this table is used to specify the MPLS VS and interface to be trusted.
1.3.6.1.4.1.1271.2.1.30.1.2.14.1not-accessiblecurrent
cienaCesDhcpv6LdraMplsInterface
OBJECT-TYPE
This object is used as an index in the table and is used to specify the MPLS interface.
1.3.6.1.4.1.1271.2.1.30.1.2.14.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
cienaCesDhcpv6LdraMplsVcName
OBJECT-TYPE
This object shows the name of the MPLS VC.
1.3.6.1.4.1.1271.2.1.30.1.2.14.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesDhcpv6LdraMplsInterfaceState
OBJECT-TYPE
This object reports whether the specified interface is active or inactive.
1.3.6.1.4.1.1271.2.1.30.1.2.14.1.3INTEGER {active(1), inactive(2)}read-onlycurrent
cienaCesDhcpv6LdraMplsTrustMode
OBJECT-TYPE
This object is used to set the interface as client trusted, server trusted or not trusted. Note that the client(1) mode is deprecated. That value will never be returned. Setting that value will set the mode to clientTrust(2) instead.
1.3.6.1.4.1.1271.2.1.30.1.2.14.1.4INTEGER {client(1), clientTrust(2), serverTrust(3), dualRoleTrust(4), unTrust(5)}read-writecurrent
cienaCesDhcpv6LdraMplsStatsTable
OBJECT-TYPE
Table to display MPLS statistics for each MPLS LDRA.
1.3.6.1.4.1.1271.2.1.30.1.2.15not-accessiblecurrent
cienaCesDhcpv6LdraMplsStatsEntry
OBJECT-TYPE
Entry in the table to display MPLS LDRA statistics.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1not-accessiblecurrent
cienaCesDhcpv6LdraMplsPktsForRelay
OBJECT-TYPE
This object specifies the number of packets sent to this relay process.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.1Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsRelayedClient
OBJECT-TYPE
This object specifies the number of client sourced DHCPv6 packets relayed.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.2Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsRelayedServer
OBJECT-TYPE
This object specifies the number of server sourced DHCPv6 packets relayed.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.3Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsUntrustedClientInterfacePktsRx
OBJECT-TYPE
This object specifies the number of client DHCPv6 packets dropped because they were received on untrusted client interfaces.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.4Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsUntrustedServerInterfacePktsRx
OBJECT-TYPE
This object specifies the number of server DHCPv6 packets dropped because they were received on untrusted server interfaces.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.5Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsFailedValidationPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to failed validation.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.6Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsInvalidConfigPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to LDRA configuration issues.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.7Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsExceededHopCountPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to hop count in the packet exceeding hop count the limit.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.8Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsExceedMTUPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped because the new relay frame size would exceed the MTU.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.9Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsNoTrustedServerPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped because there are no server trusted interfaces configured.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.10Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsNoTrustedClientPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped because there are no client trusted interfaces configured.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.11Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsIPv6FragBadExtHdrPktDrop
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to IPv6 packet extension headers that could not be processed.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.12Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsGeneralErrors
OBJECT-TYPE
This object specifies the number of DHCPv6 packets dropped due to unclassified errors.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.13Counter32read-onlycurrent
cienaCesDhcpv6LdraMplsStatsClear
OBJECT-TYPE
This object when set to 'true', clears DHCPv6 LDRA stats for given VLAN.
1.3.6.1.4.1.1271.2.1.30.1.2.15.1.14CienaStatsClearread-writecurrent
cienaCesDhcpv6LdraMplsIntidStringTable
OBJECT-TYPE
This table is used to specify interface ID strings for MPLS VSs and interfaces that the DHCPv6 LDRA can specify in Option 82 CID information.
1.3.6.1.4.1.1271.2.1.30.1.2.16not-accessiblecurrent
cienaCesDhcpv6LdraMplsIntidStringEntry
OBJECT-TYPE
Each entry in this table is used to specify an interface ID string for MPLS VS and interface combinations.
1.3.6.1.4.1.1271.2.1.30.1.2.16.1not-accessiblecurrent
cienaCesDhcpv6LdraMplsIntidString
OBJECT-TYPE
This object is used to get and set the IntID string for the interface.
1.3.6.1.4.1.1271.2.1.30.1.2.16.1.1DisplayString (SIZE(1..64))read-createcurrent
cienaCesDhcpv6LdraMplsIntidStringRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
1.3.6.1.4.1.1271.2.1.30.1.2.16.1.2RowStatusread-createcurrent
cienaCesDhcpv6LdraMplsRidStringTable
OBJECT-TYPE
This table is used to specify RID strings for MPLS VSs and interfaces that the DHCPv6 LDRA can specify in Option 82 RID information.
1.3.6.1.4.1.1271.2.1.30.1.2.17not-accessiblecurrent
cienaCesDhcpv6LdraMplsRidStringEntry
OBJECT-TYPE
Each entry in this table is used to specify an RID string for MPLS VS and interface combinations.
1.3.6.1.4.1.1271.2.1.30.1.2.17.1not-accessiblecurrent
cienaCesDhcpv6LdraMplsRidString
OBJECT-TYPE
This MIB object is used to get and set the RID string for the interface.
1.3.6.1.4.1.1271.2.1.30.1.2.17.1.1DisplayString (SIZE(1..64))read-createcurrent
cienaCesDhcpv6LdraMplsRidStringRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
1.3.6.1.4.1.1271.2.1.30.1.2.17.1.2RowStatusread-createcurrent
cienaCesDhcpv6ClientMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.30.2
cienaCesDhcpv6ClientMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.30.2.1
cienaCesDhcpv6ClientMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.30.2.2
cienaCesDhcpv6ClientMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.2.30
cienaCesDhcpv6ClientMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.2.30.0