CENTRECOM-SYSTEM-MIB
- Registered at
- 1.3.6.1.4.1.207.8.12.2.3
- Last updated
- 1998-10-02 00:00
- Organization
- Allied Telesis K.K
- Namespace
- allied
- Source file
CENTRECOM-SYSTEM-MIB- Digest
sha256:eeba36b74262a87ffb67912b48df12972a2aa0671aeaa786fc4316376a12fbb4
Description
Atkk Switch System objects
Contact
www1.allied-telesis.co.jp/GIGA
Imports
| From | Symbols |
|---|---|
| CENTRECOM-MIB | extSwitchMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CENTRECOM-MIB CENTRECOM-SYSTEM-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| atiSaveConfiguration OBJECT-TYPE When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value of the object. The save is performed asynchronously, and the snmp agent will continue to respond to both gets and sets while the save is taking place. A network management application may use the atiSaveStatus object to determine when the asynchronous save operation has completed. | 1.3.6.1.4.1.207.8.12.2.3.3 | INTEGER {saveToPrimary(1), saveToSecondary(2)} | write-only | mandatory |
| atiSaveStatus OBJECT-TYPE This object will return the status of a save operation invoked by setting the atiSaveConfiguration object. A network management application can read this object to determine that a save operation has completed. | 1.3.6.1.4.1.207.8.12.2.3.4 | INTEGER {saveInProgress(1), saveNotInProgress(2)} | read-only | mandatory |
| atiCurrentConfigInUse OBJECT-TYPE Shows which NVRAM configuration store was used at last boot | 1.3.6.1.4.1.207.8.12.2.3.5 | INTEGER {primary(1), secondary(2)} | read-only | mandatory |
| atiConfigToUseOnReboot OBJECT-TYPE Controls which NVRAM configuration store will be used on next reboot. | 1.3.6.1.4.1.207.8.12.2.3.6 | INTEGER {primary(1), secondary(2)} | read-write | mandatory |
| atiOverTemperatureAlarm OBJECT-TYPE Alarm status of overtemperature sensor in device enclosure. | 1.3.6.1.4.1.207.8.12.2.3.7 | TruthValue | read-only | mandatory |
| atiCurrentTemperature OBJECT-TYPE Current temperature in degrees celcius measured inside device enclosure. | 1.3.6.1.4.1.207.8.12.2.3.8 | INTEGER (0..100) | read-only | mandatory |
| atiFanStatusTable OBJECT-TYPE Table of operational status of all internal cooling fans. | 1.3.6.1.4.1.207.8.12.2.3.9 | not-accessible | mandatory | |
| atiFanStatusEntry OBJECT-TYPE Entry in table of all internal cooling fans. | 1.3.6.1.4.1.207.8.12.2.3.9.1 | not-accessible | mandatory | |
| atiFanNumber OBJECT-TYPE Identifier of cooling fan, numbered from the front and/or left side of device. | 1.3.6.1.4.1.207.8.12.2.3.9.1.1 | INTEGER | read-only | mandatory |
| atiFanOperational OBJECT-TYPE Operational status of a cooling fan. | 1.3.6.1.4.1.207.8.12.2.3.9.1.2 | TruthValue | read-only | mandatory |
| atiPrimaryPowerOperational OBJECT-TYPE Operational status of internal power supply of a device. | 1.3.6.1.4.1.207.8.12.2.3.10 | TruthValue | read-only | mandatory |
| atiRedundantPowerStatus OBJECT-TYPE Operational status of an external redundant power supply to a device. | 1.3.6.1.4.1.207.8.12.2.3.11 | INTEGER {notPresent(1), presentOK(2), presentNotOK(3)} | read-only | mandatory |
| atiRedundantPowerAlarm OBJECT-TYPE Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition. | 1.3.6.1.4.1.207.8.12.2.3.12 | TruthValue | read-only | mandatory |
| atiPrimarySoftwareRev OBJECT-TYPE The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device. | 1.3.6.1.4.1.207.8.12.2.3.13 | DisplayString (SIZE(0..15)) | read-only | mandatory |
| atiSecondarySoftwareRev OBJECT-TYPE The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device. | 1.3.6.1.4.1.207.8.12.2.3.14 | DisplayString (SIZE(0..15)) | read-only | mandatory |
| atiImageToUseOnReboot OBJECT-TYPE Controls which image will be used on next reboot. | 1.3.6.1.4.1.207.8.12.2.3.15 | INTEGER {primary(1), secondary(2)} | read-write | mandatory |
| atiSystemID OBJECT-TYPE This represents the System ID of the Switch. | 1.3.6.1.4.1.207.8.12.2.3.16 | DisplayString (SIZE(0..126)) | read-only | mandatory |
| atiSystemBoardID OBJECT-TYPE This represents the Board ID of the Switch. | 1.3.6.1.4.1.207.8.12.2.3.17 | DisplayString (SIZE(0..126)) | read-only | mandatory |
| atiSystemLeftBoardID OBJECT-TYPE This represents the Left Board ID of the Summit Switch. | 1.3.6.1.4.1.207.8.12.2.3.18 | DisplayString (SIZE(0..126)) | read-only | mandatory |
| atiSystemRightBoardID OBJECT-TYPE This represents the Right Board ID of the Summit Switch. | 1.3.6.1.4.1.207.8.12.2.3.19 | DisplayString (SIZE(0..126)) | read-only | mandatory |