CENTRECOM-QOS-MIB
- Registered at
- 1.3.6.1.4.1.207.8.12.2.5
- Last updated
- 1998-03-02 00:00
- Organization
- Allied Telesis K.K
- Namespace
- allied
- Source file
CENTRECOM-QOS-MIB- Digest
sha256:b300780bdfe959d2d14a7038806e5749918e26de252fcf25d9306a841e010d1e
Description
Atkk Quality-of-Service objects
Contact
www1.allied-telesis.co.jp/GIGA
Imports
| From | Symbols |
|---|---|
| CENTRECOM-MIB | extSwitchMIB |
| CENTRECOM-VLAN-MIB | atiVlanIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CENTRECOM-MIB CENTRECOM-QOS-MIB CENTRECOM-VLAN-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| atiQosCommon OBJECT-IDENTITY | 1.3.6.1.4.1.207.8.12.2.5.1 | |||
| atiQosMode OBJECT-TYPE Indicates which QoS mode the device should use. ingress(1) applies priority-based QoS based on the incoming packet's destination IP or MAC address, 802.1p priority, PACE(tm), Source Port or VLAN. egress(2) applies priority- and bandwidth-based QoS based on destination IP or MAC address or VLAN. | 1.3.6.1.4.1.207.8.12.2.5.1.4 | INTEGER {ingress(1), egress(2)} | read-write | mandatory |
| atiQosUnconfigure OBJECT-TYPE Setting this to true will reset all QoS settings in the device to factory defaults. Reads from this value return an undefined value. | 1.3.6.1.4.1.207.8.12.2.5.1.5 | TruthValue | read-write | mandatory |
| atiQosProfileTable OBJECT-TYPE This table lists QoS profiles. | 1.3.6.1.4.1.207.8.12.2.5.1.6 | not-accessible | mandatory | |
| atiQosProfileEntry OBJECT-TYPE An individual QoS profile Entry. | 1.3.6.1.4.1.207.8.12.2.5.1.6.1 | not-accessible | mandatory | |
| atiQosProfileIndex OBJECT-TYPE An index that uniquely identifies an entry in the qos table. | 1.3.6.1.4.1.207.8.12.2.5.1.6.1.1 | INTEGER (1..65535) | read-write | mandatory |
| atiQosProfileName OBJECT-TYPE A unique qos profile name. | 1.3.6.1.4.1.207.8.12.2.5.1.6.1.2 | DisplayString (SIZE(0..127)) | read-write | mandatory |
| atiQosProfileMinBw OBJECT-TYPE The minumum percentage of bandwidth that this queue requires. The Switch is required to provide the minumum amount of bandwidth to the queue. The lowest possible value is 0%. | 1.3.6.1.4.1.207.8.12.2.5.1.6.1.3 | INTEGER | read-write | mandatory |
| atiQosProfileMaxBw OBJECT-TYPE The maximum percentage of bandwidth that this queue is permitted to use | 1.3.6.1.4.1.207.8.12.2.5.1.6.1.4 | INTEGER | read-write | mandatory |
| atiQosProfilePriority OBJECT-TYPE The level of priority in which this queue will be serviced by the Switch. | 1.3.6.1.4.1.207.8.12.2.5.1.6.1.5 | INTEGER {low(1), normal(2), medium(3), high(4)} | read-write | mandatory |
| atiQosProfileRowStatus OBJECT-TYPE The status of the atiQosProfile entry. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) notReady(3). Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to createAndWait(5) causes a row in this table to be created. The agent sets the status to notInService(2) if all of the information is present in the row and the values are acceptable to the agent; otherwise, the agent sets the status to notReady(3). Setting this object to active(1) is only valid when the current status is active(1) or notInService(2). When the state of the row transitions is set to active(1), the agent creates the corresponding row in the ifTable.. Setting this object to destroy(6) will remove the corresponding QoS Profile Entry. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any stacking dependencies in the ifStackTable and any protocol specific tables dependencies. | 1.3.6.1.4.1.207.8.12.2.5.1.6.1.6 | RowStatus | read-write | mandatory |
| atiQosByVlanMappingTable OBJECT-TYPE Table to associate a Vlan with the QoS profile that the Vlan is using. Every Vlan is assigned a Qos Profile and hence there is an entry in this table corresponding to every entry in the atiVlanIfTable. | 1.3.6.1.4.1.207.8.12.2.5.1.7 | not-accessible | mandatory | |
| atiQosByVlanMappingEntry OBJECT-TYPE The QoS associated with a particular Vlan. | 1.3.6.1.4.1.207.8.12.2.5.1.7.1 | not-accessible | mandatory | |
| atiQosByVlanMappingQosProfileIndex OBJECT-TYPE Value of atiQosProfileIndex that uniquely identifies a QoS Profile entry in atiQosProfileTable. This indicates the QoS to be given to traffic for this Vlan in the absence of any other more specific configuration information for this traffic. | 1.3.6.1.4.1.207.8.12.2.5.1.7.1.1 | INTEGER (1..65535) | read-write | mandatory |