CENTILLION-MCAST-MIB
- Registered at
- 1.3.6.1.4.1.930.2.1.2.31
- Namespace
- nortel
- Source file
CENTILLION-MCAST-MIB- Digest
sha256:e42ff22c8682acb0fdf6dd904619c6896caf30074f64a39df5b3ecddefb2f01d
Imports
| From | Symbols |
|---|---|
| CENTILLION-ROOT-MIB | Boolean, CardId, EnableIndicator, PortId, StatusIndicator, sysConfig |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CENTILLION-MCAST-MIB CENTILLION-ROOT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-SMI-v1 SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.930.2.1.2.31.2 | cnVlanMemberGroup | CENTILLION-VLAN-MIB |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| VlanId type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| vlan OBJECT-IDENTITY | 1.3.6.1.4.1.930.2.1.2.31 | |||
| vlanMcastProtocolGroup OBJECT-IDENTITY | 1.3.6.1.4.1.930.2.1.2.31.1 | |||
| vlanIGMPProtocolGroup OBJECT-IDENTITY | 1.3.6.1.4.1.930.2.1.2.31.1.1 | |||
| vlanIGMPConfig OBJECT-IDENTITY | 1.3.6.1.4.1.930.2.1.2.31.1.1.1 | |||
| igmpGeneralConfigTable OBJECT-TYPE IP IGMP general configuration table which includes pseudo query, IRAP query configuration, and maximum number of groups supported in this VLAN. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.1 | not-accessible | mandatory | |
| igmpGeneralConfigEntry OBJECT-TYPE IP IGMP general configuration entry. Each entry is indexed by a vlan id. An example to create the entry is: set igmpGeneralConfigIgmpSupport.3=I2 and igmpGeneralConfigMaxGroup.3=I20 to a switch ip address. (where 3 is vlan Id; 2 is enabled; 20 is maximum multicast groups to be supported for this vlan. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.1.1 | not-accessible | mandatory | |
| igmpGeneralConfigVlanId OBJECT-TYPE The unique VLAN identifier of this IGMP configuration entry. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.1.1.1 | VlanId | read-only | mandatory |
| igmpGeneralConfigPseudoQuery OBJECT-TYPE In the absence of a true IGMP router, the switch may be configured to issue general queries. This provides the capability for multicast pruning with an isoloated subnet. The mode defaults to disabled in a VLAN configured for IGMP support | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.1.1.2 | EnableIndicator | read-write | mandatory |
| igmpGeneralConfigIrapQuery OBJECT-TYPE Control whether IGMP Router Advertisement Protocol messages will be used to determine the existence of a router in a remote switch. Default is 'enabled'. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.1.1.3 | EnableIndicator | read-write | mandatory |
| igmpGeneralConfigIgmpSupport OBJECT-TYPE When 'enabled' is specified, it indicates that the IGMP is supported in this VLAN. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.1.1.4 | EnableIndicator | read-write | mandatory |
| igmpGeneralConfigMaxGroup OBJECT-TYPE The maximum number of multicast groups supported in this VLAN. If the VLAN supports only manually configured multicast groups, then the value of this field equals the length of the IGMP multicast group if the multicast group is an inclusive set. A value of 0 indicates that IGMP multicasting is not supported in this VLAN | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.1.1.5 | INTEGER | read-write | mandatory |
| igmpTimerConfigTable OBJECT-TYPE IP IGMP Multicast timer configuration table | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.2 | not-accessible | mandatory | |
| igmpTimerConfigEntry OBJECT-TYPE IP IGMP Multicast timer configuration entry. Each entry is indexed by a vlan id. This entry will be created when the corresponding igmpGeneralConfigEntry is created. All the values of the mibs in this entry will be set to default at the time of creation. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.2.1 | not-accessible | mandatory | |
| igmpTimerConfigVlanId OBJECT-TYPE The unique VLAN identifier of this multicast timer configuration entry. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.2.1.1 | VlanId | read-only | mandatory |
| igmpTimerConfigTimerRobustness OBJECT-TYPE The robustness variable for the multicast group. A value of zero indicates the default value should be taken. If the value specified is non-zero, it should be equal or greater than 2 | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.2.1.2 | INTEGER | read-write | mandatory |
| igmpTimerConfigQueryInterval OBJECT-TYPE The query interval configured for the multicast group. A value of zero indicates the default value should be used. The value should be less than 0xffff | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.2.1.3 | INTEGER | read-write | mandatory |
| igmpTimerConfigQueryResponse OBJECT-TYPE The response interval configured for the multicast group. A value of zero indicates the default value should be used. The value should be less than 0xffff. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.2.1.4 | INTEGER | read-write | mandatory |
| igmpGroupTable OBJECT-TYPE IP IGMP Multicast group address configuration table. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.3 | not-accessible | mandatory | |
| igmpGroupEntry OBJECT-TYPE IP IGMP Multicast group configuration entry. Each entry is indexed by igmpGroupVlanId, igmpGroupStatic, and igmpGroupAddress | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.3.1 | not-accessible | mandatory | |
| igmpGroupVlanId OBJECT-TYPE The unique VLAN identifier of this IGMP multicast group address entry. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.3.1.1 | VlanId | read-only | mandatory |
| igmpGroupStatic OBJECT-TYPE Indicates whether the IGMP multicast group was created statically(TRUE) by a management entity, or dynamically learned | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.3.1.2 | Boolean | read-only | mandatory |
| igmpGroupAddress OBJECT-TYPE The multicast group address(Class D). The range is from 224.0.0.0 to 239.255.255.255. The addresses from 224.0.0.0 to 224.0.0.255 are reserved IP multicast addresses. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.3.1.3 | IpAddress | read-only | mandatory |
| igmpGroupIncluded OBJECT-TYPE Indicates the multicast addresses are to be included or excluded from the group. Dynamic entries are always included and can not be modified, while static entries may be either included or excluded. For each VLAN, it only allows to configure either 'included' as static or 'excluded' as static. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.3.1.4 | INTEGER {included(1), excluded(2)} | read-write | mandatory |
| igmpGroupStatus OBJECT-TYPE The status of this multicast group entry: 'valid' and 'invalid'. This object enables the user to add or delete this multicast group. Setting the status as 'valid' is to add the entry; otherwise as 'invalid' is to delete the entry. An example to create an multicast group entry is: set igmpGroupStatus.3.1.224.0.0.1= valid where 3: vlan id; 1: static; 224.0.0.1: multicast group IP address | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.3.1.5 | StatusIndicator | read-write | mandatory |
| igmpRouterPortTable OBJECT-TYPE IP IGMP Multicast router port table. It contains a list of the ports containing configured IGMP routers. These ports initialize the IPrDtag and IPmDtag for the group. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.4 | not-accessible | mandatory | |
| igmpRouterPortEntry OBJECT-TYPE IP IGMP Multicast router port entry. Each entry is indexed by igmpRouterPortVlanId, igmpRouterPortStatic, igmpRouterPortCard, igmpRouterPortPort | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.4.1 | not-accessible | mandatory | |
| igmpRouterPortVlanId OBJECT-TYPE The unique VLAN identifier of this IGMP multicast router port entry. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.4.1.1 | VlanId | read-only | mandatory |
| igmpRouterPortStatic OBJECT-TYPE Indicates whether the IGMP multicast router port was created statically(TRUE) by a management entity, or dynamically learned. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.4.1.2 | Boolean | read-only | mandatory |
| igmpRouterPortCard OBJECT-TYPE The card id of this multicast router port entry. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.4.1.3 | CardId | read-only | mandatory |
| igmpRouterPortPort OBJECT-TYPE The port id of this multicast router port entry. | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.4.1.4 | PortId | read-only | mandatory |
| igmpRouterPortStatus OBJECT-TYPE The status of this multicast router port entry: 'valid' and 'invalid'. This object enables the user to add or delete this multicast group. Setting the status as 'valid' is to add the entry; otherwise as 'invalid' is to delete the entry. An example to create an multicast router port entry is: set igmpRouterPortStatus.3.1.5.2 = valid where 3: vlan id; 1: static; 5.2 : card/port that is connected with igmp router | 1.3.6.1.4.1.930.2.1.2.31.1.1.1.4.1.5 | StatusIndicator | read-write | mandatory |