CASA-CABLE-CMCPE-MIB
- Registered at
- 1.3.6.1.4.1.20858.10
- Last updated
- 2008-12-02 14:53
- Organization
- Casa Systems Inc
- Namespace
- casa
- Source file
CASA-CABLE-CMCPE-MIB- Digest
sha256:dad5558a94cf007a5a8d18fb13a702a3622276f57f7dcbd753ef13a4d31e6412
Description
This is the enterprise MIB Module for CASA systems CMTS.
Contact
Guangzhou Casa Communications Ltd. No.206 YueHe Bld,Huacui Str. Tianhe Industrial Park Guangzhou China TEL:020 85545002/85577786 ext.212 FAX:020 85545002 ext.230 E-mail: huangxiaole@casachina.com.cn
Imports
| From | Symbols |
|---|---|
| CASA-MIB | casa |
| IF-MIB | InterfaceIndex, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CASA-CABLE-CMCPE-MIB CASA-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.20858.10.11 | casaFlapListMib | CASA-CABLE-FLAPLIST-MIB |
| 1.3.6.1.4.1.20858.10.13 | casaModuleCpuMemMib | CASA-ENTITY-EXT-MIB |
| 1.3.6.1.4.1.20858.10.18 | casaCmQueryMib | CASA-CABLE-CMQUERY-MIB |
| 1.3.6.1.4.1.20858.10.19 | casa802TapMIB | CASA-802-TAP-MIB |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| casaMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.20858.10 | |||
| casaCmtsCmCpeObjects OBJECT-IDENTITY | 1.3.6.1.4.1.20858.10.12.1 | |||
| casaCmtsUSModemTable OBJECT-TYPE Modem count for each upstream channel. | 1.3.6.1.4.1.20858.10.12.1.1 | not-accessible | current | |
| casaCmtsUSModemEntry OBJECT-TYPE Index of the table is logical uptream channel ifIndex . | 1.3.6.1.4.1.20858.10.12.1.1.1 | not-accessible | current | |
| casaCmtsUSActiveModemCount OBJECT-TYPE Active modem count for each upstream channel. | 1.3.6.1.4.1.20858.10.12.1.1.1.1 | Unsigned32 | read-only | current |
| casaCmtsUSRegisteredModemCount OBJECT-TYPE Registered modem count for each upstream channel. | 1.3.6.1.4.1.20858.10.12.1.1.1.2 | Unsigned32 | read-only | current |
| casaCmtsUSTotalModemCount OBJECT-TYPE Modem total for each upstream channel. | 1.3.6.1.4.1.20858.10.12.1.1.1.3 | Unsigned32 | read-only | current |
| casaCmtsDSModemTable OBJECT-TYPE Modem count for each downstream channel. | 1.3.6.1.4.1.20858.10.12.1.2 | not-accessible | current | |
| casaCmtsDSModemEntry OBJECT-TYPE Index of the table is downstream channel ifIndex . | 1.3.6.1.4.1.20858.10.12.1.2.1 | not-accessible | current | |
| casaCmtsDSActiveModemCount OBJECT-TYPE Active modem count for each downstream channel. | 1.3.6.1.4.1.20858.10.12.1.2.1.1 | Unsigned32 | read-only | current |
| casaCmtsDSRegisteredModemCount OBJECT-TYPE Registered modem count for each downstream channel. | 1.3.6.1.4.1.20858.10.12.1.2.1.2 | Unsigned32 | read-only | current |
| casaCmtsDSTotalModemCount OBJECT-TYPE Modem total for each downstream channel. | 1.3.6.1.4.1.20858.10.12.1.2.1.3 | Unsigned32 | read-only | current |
| casaCmtsCmCpeTable OBJECT-TYPE Describes the relation between CPE and CM. | 1.3.6.1.4.1.20858.10.12.1.3 | not-accessible | current | |
| casaCmtsCmCpeEntry OBJECT-TYPE The list contains information for a cable modem (CM) or a Customer Premises Equipment (CPE). An entry exist for each cable modem supported by CMTS and each Customer Premises Equipment connected to a cable modem supported by CMTS. | 1.3.6.1.4.1.20858.10.12.1.3.1 | not-accessible | current | |
| casaCmtsCmCpeMacAddress OBJECT-TYPE The Mac address to identify a cable modem or a Customer Premises Equipment. | 1.3.6.1.4.1.20858.10.12.1.3.1.1 | MacAddress | not-accessible | current |
| casaCmtsCmCpeType OBJECT-TYPE ndicate this entry is for cable modem or Customer Premises Equipment. The enumerations are: cm(1): cable modem cpe(2): Customer Premises Equipment | 1.3.6.1.4.1.20858.10.12.1.3.1.2 | INTEGER {cm(1), cpe(2)} | read-only | current |
| casaCmtsCmCpeIpAddress OBJECT-TYPE Ip address of the cable modem or Customer Premises Equipment. | 1.3.6.1.4.1.20858.10.12.1.3.1.3 | IpAddress | read-only | current |
| casaCmtsCmCpeIfIndex OBJECT-TYPE The CMTS cable MAC interface index (ifType of docsCableMaclayer(127)) that cable modem or Customer Premises Equipment connects to. Use casaCmtsCmCpeIfIndex and casaCmtsCmCpeCmtsServiceId to identify an entry in docsIfCmtsServiceTable. | 1.3.6.1.4.1.20858.10.12.1.3.1.4 | InterfaceIndex | read-only | current |
| casaCmtsCmCpeCmtsServiceId OBJECT-TYPE The cable modem's primary Service ID if the type is cm. The primary Service ID for the CM which the CPE connects if the type is cpe. Use casaCmtsCmCpeIfIndex and casaCmtsCmCpeCmtsServiceId to identify an entry in docsIfCmtsServiceTable. | 1.3.6.1.4.1.20858.10.12.1.3.1.5 | Integer32 (1..16383) | read-only | current |
| casaCmtsCmCpeCmStatusIndex OBJECT-TYPE Pointer to an entry in docsIfCmtsCmStatusTable identifying status of the CM (which the CPE connects to.) | 1.3.6.1.4.1.20858.10.12.1.3.1.6 | Integer32 (1..2147483647) | read-only | current |
| casaCmtsCmCpeResetNow OBJECT-TYPE Setting this object to true(1) causes the device to reset. Reading this object always returns false(2). For casaCmtsCmCpeType value cm(1), CMTS removes the CM from the Station Maintenance List and would cause the CM to reset its interface. For casaCmtsCmCpeType value cpe(2), CMTS removes the CPE's MAC address from the internal address table. It then rediscovers and associates the CPE with the correct CM during the next DHCP lease cycle. By resetting the CPE, the user can replace an existing CPE or change its network interface card (NIC) | 1.3.6.1.4.1.20858.10.12.1.3.1.7 | TruthValue | read-write | current |
| casaCmtsCpeIpNetToPhysicalTable OBJECT-TYPE The IP Address Translation table used for mapping from IP addresses to physical addresses. | 1.3.6.1.4.1.20858.10.12.1.4 | not-accessible | current | |
| casaCmtsCpeIpNetToPhysicalEntry OBJECT-TYPE Each entry contains one IP address to `physical' address equivalence.. | 1.3.6.1.4.1.20858.10.12.1.4.1 | not-accessible | current | |
| casaCmtsCpeIpNetToPhysicalIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.4.1.20858.10.12.1.4.1.1 | InterfaceIndex | not-accessible | current |
| casaCmtsCpeIpNetToPhysicalNetAddressType OBJECT-TYPE The type of casaCmtsCpeIpNetToPhysicalNetAddress. | 1.3.6.1.4.1.20858.10.12.1.4.1.2 | InetAddressType | not-accessible | current |
| casaCmtsCpeIpNetToPhysicalNetAddress OBJECT-TYPE The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in casaCmtsCpeIpNetToPhysicalAddressType. | 1.3.6.1.4.1.20858.10.12.1.4.1.3 | InetAddress | not-accessible | current |
| casaCmtsCpeIpNetToPhysicalCmPhysAddress OBJECT-TYPE The CM MAC address. | 1.3.6.1.4.1.20858.10.12.1.4.1.5 | PhysAddress | read-only | current |
| casaCmtsCpeIpNetToPhysicalType OBJECT-TYPE The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToPhysicalTable. That is, it effectively dis- associates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToPhysicalType object. The 'dynamic(3)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g., IPv4 ARP or the IPv6 Neighbor Discovery protocol. The 'static(4)' type indicates that the mapping has been statically configured. Both of these refer to entries that provide mappings for other entities addresses. The 'local(5)' type indicates that the mapping is provided for an entity's own interface address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage. | 1.3.6.1.4.1.20858.10.12.1.4.1.7 | INTEGER {other(1), invalid(2), dynamic(3), static(4)} | read-only | current |
| casaCmtsCmReset OBJECT-IDENTITY | 1.3.6.1.4.1.20858.10.12.1.5 | |||
| casaCmtsCmResetByIpAddr OBJECT-TYPE to reset cable modem by ip address | 1.3.6.1.4.1.20858.10.12.1.5.1 | IpAddress | read-write | current |
| casaCmtsCmResetByMacAddr OBJECT-TYPE to reset cable modem by mac address | 1.3.6.1.4.1.20858.10.12.1.5.2 | MacAddress | read-write | current |
| casaCmtsCmResetAll OBJECT-TYPE If set to 'true', all cable modem are reset. Reading this object always returns 'false'. | 1.3.6.1.4.1.20858.10.12.1.5.3 | TruthValue | read-write | current |
| casaCmCpeGroups OBJECT-IDENTITY | 1.3.6.1.4.1.20858.10.12.2 | |||
| casaCmCpeCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.20858.10.12.3 |
Conformance
| Name | OID | Status |
|---|---|---|
| casaCmCpeGroup OBJECT-GROUP Description. | 1.3.6.1.4.1.20858.10.12.2.1 | current |
| casaCmCpeCompliance MODULE-COMPLIANCE Description. | 1.3.6.1.4.1.20858.10.12.3.1 | current |