MIBs Depot

CAMBIUM-PTP250-MIB

Registered at
1.3.6.1.4.1.17713.250
Last updated
2012-12-07 09:35
Organization
Cambium Networks
Revisions
2012-12-07 09:35, 2011-10-18 10:47
Namespace
cambium
Source file
CAMBIUM-PTP250-MIB
Digest
sha256:a25a1d05ae55bc387696ef43e3e0f46835676110647d67f958125a2c9ea23dfb

Description

MIB for PTP250

Contact

Post: Bill Jones Cambium Networks Ltd. Unit B2, Linhay Business Park, Eastern Road, Ashburton, Devon. TQ13 7UP United Kingdom Phone: +44 (0) 1364 655 500 Email: bill.jones@cambiumnetworks.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CAMBIUM-PTP250-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
ptp
OBJECT-IDENTITY
1.3.6.1.4.1.17713.1
ptmp
OBJECT-IDENTITY
1.3.6.1.4.1.17713.2
ptp250
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250
configuration
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.1
iPAddress
OBJECT-TYPE
Internet protocol (IP) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network.
1.3.6.1.4.1.17713.250.1.1IpAddressread-onlycurrent
subnetMask
OBJECT-TYPE
A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnetting can improve network security and performance.
1.3.6.1.4.1.17713.250.1.2IpAddressread-onlycurrent
gatewayIPAddress
OBJECT-TYPE
The IP address of a computer on the current network that is currently acting as a network gateway. A gateway acts as an entrance / exit to packets from / to other networks.
1.3.6.1.4.1.17713.250.1.3IpAddressread-onlycurrent
remoteMACAddress
OBJECT-TYPE
MAC address of the PTP wireless unit forming the other end of the PTP link
1.3.6.1.4.1.17713.250.1.4OCTET STRING (SIZE(6))read-onlycurrent
masterSlaveMode
OBJECT-TYPE
The PTP wireless link operates using a master and slave relationship
1.3.6.1.4.1.17713.250.1.5INTEGER {slave(0), master(1)}read-onlycurrent
maximumTransmitPower
OBJECT-TYPE
Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link
1.3.6.1.4.1.17713.250.1.6Integer32 (-15..27)read-onlycurrent
antennaGain
OBJECT-TYPE
Antenna Gain. Expressed in 10ths of dBi. NB: This attribute is ignored for variants with an integral antenna.
1.3.6.1.4.1.17713.250.1.7Integer32 (0..610)read-onlycurrent
cableLoss
OBJECT-TYPE
Loss in the cable between the ODU and the antenna. Expressed in 10ths of dB. NB: This attribute is ignored for variants with an integral antenna.
1.3.6.1.4.1.17713.250.1.8Integer32 (0..255)read-onlycurrent
channelBandwidth
OBJECT-TYPE
The selected bandwidth of the transmit and receive radio channels
1.3.6.1.4.1.17713.250.1.9INTEGER {bw20MHz(0), bw40MHz(1)}read-onlycurrent
remoteIPAddress
OBJECT-TYPE
IP Address of the peer wireless unit
1.3.6.1.4.1.17713.250.1.10IpAddressread-onlycurrent
linkName
OBJECT-TYPE
Name of the PTP link allocated by the System Administrator. Used to establish a connection with the correct PTP wireless unit at the other end of the link. NOTE: The link name MUST be the same at both ends of the PTP link.
1.3.6.1.4.1.17713.250.1.11DisplayString (SIZE(0..63))read-onlycurrent
siteName
OBJECT-TYPE
This field contains a user-provided description of the site name together with any additional notes
1.3.6.1.4.1.17713.250.1.12DisplayString (SIZE(0..63))read-onlycurrent
configuredModulationMode
OBJECT-TYPE
The fixed modulation mode or maximum adaptive modulation mode to be used by the wireless link
1.3.6.1.4.1.17713.250.1.13INTEGER {modBpskHalf(0), modQpskHalf(1), modQpskThreeQuarters(2), mod16QamHalf(3), mod16QamThreeQuarters(4), mod64QamTwoThirds(5), mod64QamThreeQuarters(6), mod64QamFiveSixths(7)}read-onlycurrent
band
OBJECT-TYPE
The frequency band to be used by the wireless link
1.3.6.1.4.1.17713.250.1.14INTEGER {unset(0), freq5400MHz(1), freq5800MHz(2)}read-onlycurrent
configuredRange
OBJECT-TYPE
Configured distance between the two peer wireless units expressed in hundredths of a kilometer.
1.3.6.1.4.1.17713.250.1.15Integer32 (0..5400)read-onlycurrent
channelSelection
OBJECT-TYPE
The channels selected for use by the user. The current channel will be selected from this list.
1.3.6.1.4.1.17713.250.1.16Bits {channum100(0), channum104(1), channum108(2), channum112(3), channum116(4), channum120(5), channum124(6), channum128(7), channum132(8), channum136(9), channum140(10), channum149(11), channum153(12), channum157(13), channum161(14), channum165(15)}read-onlycurrent
vlanTagging
OBJECT-TYPE
Whether or not to use VLAN tagging for management.
1.3.6.1.4.1.17713.250.1.17INTEGER {disabled(0), enabled(1)}read-onlycurrent
vlanId
OBJECT-TYPE
VLAN ID for management.
1.3.6.1.4.1.17713.250.1.18Integer32 (0..4094)read-onlycurrent
vlanPriority
OBJECT-TYPE
VLAN priority for management.
1.3.6.1.4.1.17713.250.1.19Integer32 (0..7)read-onlycurrent
fixedModMode
OBJECT-TYPE
If disabled, allows automatic modulation mode selection.
1.3.6.1.4.1.17713.250.1.22INTEGER {disabled(0), enabled(1)}read-onlycurrent
dualPayload
OBJECT-TYPE
If enabled, allows dual payload modulation modes to be selected.
1.3.6.1.4.1.17713.250.1.23INTEGER {disabled(0), enabled(1)}read-onlycurrent
ethernet
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.2
dataPortAutoNegotiation
OBJECT-TYPE
This controls whether the local Ethernet interface configuration is automatically negotiated or forced.
1.3.6.1.4.1.17713.250.2.1INTEGER {disabled(0), enabled(1)}read-onlycurrent
dataPortAutoNegAdvertisement
OBJECT-TYPE
This sets the different Ethernet configurations that will be advertised during auto negotiation.
1.3.6.1.4.1.17713.250.2.2Bits {negInvalid(0), neg10MbpsHalfDuplex(1), neg10MbpsFullDuplex(2), neg100MbpsHalfDuplex(3), neg100MbpsFullDuplex(4), neg1000MbpsFullDuplex(5)}read-onlycurrent
dataPortStatus
OBJECT-TYPE
Current status of the Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert
1.3.6.1.4.1.17713.250.2.3INTEGER {down(0), up(1)}read-onlycurrent
dataPortSpeedAndDuplex
OBJECT-TYPE
The current speed and duplex of the Ethernet link
1.3.6.1.4.1.17713.250.2.4INTEGER {speed1000MbpsFullDuplex(0), speed100MbpsFullDuplex(1), speed100MbpsHalfDuplex(2), speed10MbpsFullDuplex(3), speed10MbpsHalfDuplex(4), speedUnknown6(5)}read-onlycurrent
licence
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.3
regionCode
OBJECT-TYPE
The region code prohibits the wireless unit from operating outside the regulated limits. NB: a change of state may generate an SNMP trap and/or SMTP email alert
1.3.6.1.4.1.17713.250.3.1DisplayString (SIZE(0..63))read-onlycurrent
productVariant
OBJECT-TYPE
The product variant
1.3.6.1.4.1.17713.250.3.2INTEGER {ptpXX400Full(0), ptpXX400Deprecated1(1), ptpXX400Deprecated2(2), ptpXX400Lite(3), spare1(4), ptpXX300(5), spare2(6), spare3(7), ptpXX500FullDeprecated(8), ptpXX500LiteDeprecated(9), ptpXX500(10), ptpXX600Lite(11), ptpXX600Full(12), spare5(13), spare6(14), ptp800(15), ptp250(16)}read-onlycurrent
productName
OBJECT-TYPE
Name of the product variant
1.3.6.1.4.1.17713.250.3.3DisplayString (SIZE(0..63))read-onlycurrent
management
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.4
installArmState
OBJECT-TYPE
Indicates if the unit is being installed. NB: a change of state may generate an SNMP trap and/or SMTP email alert
1.3.6.1.4.1.17713.250.4.1INTEGER {disarmed(0), armed(1)}read-onlycurrent
tFTPServerIPAddress
OBJECT-TYPE
IP address of the TFTP Server from which the TFTP Software Upgrade File Name will be retrieved
1.3.6.1.4.1.17713.250.4.2IpAddressread-onlycurrent
tFTPServerPortNumber
OBJECT-TYPE
The port number of the TFTP Server from which the TFTP Software Upgrade File Name will be retrieved
1.3.6.1.4.1.17713.250.4.3Integer32 (0..65535)read-onlycurrent
tFTPSoftwareUpgradeFileName
OBJECT-TYPE
Filename of the Software Upgrade to be loaded from the TFTP Server
1.3.6.1.4.1.17713.250.4.4DisplayString (SIZE(0..127))read-onlycurrent
tFTPSoftwareUpgradeStatus
OBJECT-TYPE
The current status of the TFTP Software upgrade process
1.3.6.1.4.1.17713.250.4.5INTEGER {idle(0), uploadinprogress(1), uploadsuccessfulprogrammingFLASH(2), upgradesuccessfulreboottorunthenewsoftwareimage(3), upgradefailed(4)}read-onlycurrent
tFTPSoftwareUpgradeStatusText
OBJECT-TYPE
Descriptive text describing the status of the TFTP Software upgrade process, including any error details
1.3.6.1.4.1.17713.250.4.6DisplayString (SIZE(0..127))read-onlycurrent
tFTPSoftwareUpgradeStatusAdditionalText
OBJECT-TYPE
Any additional text describing the status of the TFTP Software upgrade process, including any error details
1.3.6.1.4.1.17713.250.4.7DisplayString (SIZE(0..127))read-onlycurrent
phyStatus
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.5
receivePower
OBJECT-TYPE
Receive power expressed in tenths of a dBm
1.3.6.1.4.1.17713.250.5.1Integer32read-onlycurrent
vectorError
OBJECT-TYPE
The vector error measurement compares the received signal's IQ modulation characteristics to an ideal signal to determine the composite error vector magnitude. The value represented by this attribute is the average vector error over the previous second expressed in tenths of a dB
1.3.6.1.4.1.17713.250.5.2Integer32read-onlycurrent
transmitPower
OBJECT-TYPE
Transmit power expressed in tenths of a dBm
1.3.6.1.4.1.17713.250.5.3Integer32read-onlycurrent
linkLoss
OBJECT-TYPE
The wireless link loss expressed in tenths of a dB
1.3.6.1.4.1.17713.250.5.5Integer32 (-500..500)read-onlycurrent
currentChannel
OBJECT-TYPE
Current active channel
1.3.6.1.4.1.17713.250.5.6Integer32 (0..63)read-onlycurrent
extendedChannel
OBJECT-TYPE
Current extended channel in 40MHz mode
1.3.6.1.4.1.17713.250.5.7Integer32 (0..63)read-onlycurrent
receiveModulationMode
OBJECT-TYPE
Current active receive modulation mode
1.3.6.1.4.1.17713.250.5.8INTEGER {acquisition(0), modBpskHalfSingle(1), modQpskHalfSingle(2), modQpskThreeQuartersSingle(3), mod16QamHalfSingle(4), mod16QamThreeQuartersSingle(5), mod64QamTwoThirdsSingle(6), mod64QamThreeQuartersSingle(7), mod64QamFiveSixthsSingle(8), modBpskHalfDual(9), modQpskHalfDual(10), modQpskThreeQuartersDual(11), mod16QamHalfDual(12), mod16QamThreeQuartersDual(13), mod64QamTwoThirdsDual(14), mod64QamThreeQuartersDual(15), mod64QamFiveSixthsDual(16)}read-onlycurrent
transmitModulationMode
OBJECT-TYPE
Current active transmit modulation mode
1.3.6.1.4.1.17713.250.5.9INTEGER {acquisition(0), modBpskHalfSingle(1), modQpskHalfSingle(2), modQpskThreeQuartersSingle(3), mod16QamHalfSingle(4), mod16QamThreeQuartersSingle(5), mod64QamTwoThirdsSingle(6), mod64QamThreeQuartersSingle(7), mod64QamFiveSixthsSingle(8), modBpskHalfDual(9), modQpskHalfDual(10), modQpskThreeQuartersDual(11), mod16QamHalfDual(12), mod16QamThreeQuartersDual(13), mod64QamTwoThirdsDual(14), mod64QamThreeQuartersDual(15), mod64QamFiveSixthsDual(16)}read-onlycurrent
currentFreqMHz
OBJECT-TYPE
Current channel frequency expressed in integer MHz
1.3.6.1.4.1.17713.250.5.11Integer32read-onlycurrent
extendedFreqMHz
OBJECT-TYPE
Extended channel frequency expressed in integer MHz
1.3.6.1.4.1.17713.250.5.12Integer32read-onlycurrent
signalStrengthRatio
OBJECT-TYPE
Signal strength ratio (Vertical / Horizontal) : the number of dB larger the Vertical antenna input is than the Horizontal antenna input expressed in tenths of a dB
1.3.6.1.4.1.17713.250.5.13Integer32read-onlycurrent
searchState
OBJECT-TYPE
Search status of the wireless unit. 'Registering' means that the unit has locked to an OFDM signal, and the wireless link is up. 'Searching' means that no wireless signal has been detected. 'Acquiring' means that a wireless signal has been detected, but the unit has not locked to an OFDM signal.
1.3.6.1.4.1.17713.250.5.14INTEGER {up(0), registering(1), acquiring(2), searching(3), radarCAC(4), initialising(5), noChannels(6)}read-onlycurrent
noiseFloor
OBJECT-TYPE
Noise floor expressed in tenths of a dBm
1.3.6.1.4.1.17713.250.5.15Integer32read-onlycurrent
radarDetectChannel
OBJECT-TYPE
Channel on which Radar has been detected. (Note that this variable is accessible-for-notify only).
1.3.6.1.4.1.17713.250.5.16Integer32 (0..63)accessible-for-notifycurrent
measuredRange
OBJECT-TYPE
Measured distance between the two peer wireless units expressed in tenths of Km.
1.3.6.1.4.1.17713.250.5.17Integer32read-onlycurrent
alarms
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.6
noWirelessChannelAvailable
OBJECT-TYPE
Spectrum Management was unable to locate a suitable wireless channel to operate on
1.3.6.1.4.1.17713.250.6.1INTEGER {ok(0), noWirelessChannelAvailable(1)}read-onlycurrent
smtp
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.7
sMTPServerIPAddress
OBJECT-TYPE
IP address of the SMTP server
1.3.6.1.4.1.17713.250.7.1IpAddressread-onlycurrent
sMTPServerPortNumber
OBJECT-TYPE
Port number of the SMTP server
1.3.6.1.4.1.17713.250.7.2Integer32 (0..65535)read-onlycurrent
sMTPSourceEmailAddress
OBJECT-TYPE
The 'from' email address used when constructing the automatically generated e-mail message
1.3.6.1.4.1.17713.250.7.3DisplayString (SIZE(0..63))read-onlycurrent
sMTPDestinationEmailAddress
OBJECT-TYPE
The 'to' email address used when constructing the automatically generated e-mail message
1.3.6.1.4.1.17713.250.7.4DisplayString (SIZE(0..63))read-onlycurrent
sMTPEnabledMessages
OBJECT-TYPE
This controls which SMTP messages the unit will send
1.3.6.1.4.1.17713.250.7.5Bits {dataPortUpDown(0), wirelessLinkUpDown(1), coldStart(2), radarDetect(3), installArmState(4), noChannelAvailable(5)}read-onlycurrent
snmpControl
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.8
sNMPCommunityTableNumber
OBJECT-TYPE
Number of entries in the sNMPCommunityTable.
1.3.6.1.4.1.17713.250.8.1Integer32 (2)read-onlycurrent
sNMPCommunityTable
OBJECT-TYPE
SNMP community string configuration table.
1.3.6.1.4.1.17713.250.8.2not-accessiblecurrent
sNMPCommunityTableEntry
OBJECT-TYPE
Table SNMPCommunityTable
1.3.6.1.4.1.17713.250.8.2.1not-accessiblecurrent
sNMPCommunityTableIndex
OBJECT-TYPE
SNMP community value, used to index the SNMPCommunityTable.
1.3.6.1.4.1.17713.250.8.2.1.1Integer32 (1..2)not-accessiblecurrent
sNMPCommunityString
OBJECT-TYPE
The community string for this entry
1.3.6.1.4.1.17713.250.8.2.1.2OCTET STRINGread-onlycurrent
sNMPCommunityAccess
OBJECT-TYPE
Whether this community allows read-only or read-write access
1.3.6.1.4.1.17713.250.8.2.1.3INTEGER {readOnly(0), readWrite(1)}read-onlycurrent
sNMPCommunityOid
OBJECT-TYPE
The OID at which the root of this community's subtree starts
1.3.6.1.4.1.17713.250.8.2.1.4OBJECT IDENTIFIERread-onlycurrent
sNMPTrapTableNumber
OBJECT-TYPE
Number of entries in the sNMPTrapTable.
1.3.6.1.4.1.17713.250.8.3Integer32 (2)read-onlycurrent
sNMPTrapTable
OBJECT-TYPE
SNMP trap configuration table.
1.3.6.1.4.1.17713.250.8.4not-accessiblecurrent
sNMPTrapTableEntry
OBJECT-TYPE
Table SNMPTrapTable
1.3.6.1.4.1.17713.250.8.4.1not-accessiblecurrent
sNMPTrapTableIndex
OBJECT-TYPE
SNMP trap value, used to index the SNMPTrapTable.
1.3.6.1.4.1.17713.250.8.4.1.1Integer32 (1..2)not-accessiblecurrent
sNMPTrapIPAddress
OBJECT-TYPE
The IP address to which all SNMP Traps are sent.
1.3.6.1.4.1.17713.250.8.4.1.2IpAddressread-onlycurrent
sNMPTrapPortNumber
OBJECT-TYPE
Destination port for SNMP Traps (default=162). A value of 0 will disable the trap receiver.
1.3.6.1.4.1.17713.250.8.4.1.3Integer32 (0..65535)read-onlycurrent
sNMPTrapCommunity
OBJECT-TYPE
The community string for this trap entry
1.3.6.1.4.1.17713.250.8.4.1.4OCTET STRINGread-onlycurrent
sNMPTrapVersion
OBJECT-TYPE
The SNMP protocol version for this trap entry
1.3.6.1.4.1.17713.250.8.4.1.5INTEGER {v1(0), v2c(1)}read-onlycurrent
sNMPEnabledTraps
OBJECT-TYPE
This controls which SNMP Traps the unit will send
1.3.6.1.4.1.17713.250.8.6Bits {dataPortUpDown(0), wirelessLinkUpDown(1), coldStart(2), radarDetect(3), installArmState(4), noChannelAvailable(5)}read-onlycurrent
ntp
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.9
nTPState
OBJECT-TYPE
NTP control state
1.3.6.1.4.1.17713.250.9.1INTEGER {disabled(0), enabled(1)}read-onlycurrent
nTPPollInterval
OBJECT-TYPE
The NTP server polling interval
1.3.6.1.4.1.17713.250.9.2Integer32 (60..43200)read-onlycurrent
nTPSync
OBJECT-TYPE
If NTP Sync fails then check the server settings in the Remote Management page, or disable NTP
1.3.6.1.4.1.17713.250.9.3INTEGER {noSync(0), inSync(1)}read-onlycurrent
nTPLastSync
OBJECT-TYPE
Last NTP sync time
1.3.6.1.4.1.17713.250.9.4Integer32read-onlycurrent
systemClock
OBJECT-TYPE
System clock presented as local time
1.3.6.1.4.1.17713.250.9.5Integer32read-onlycurrent
timeZone
OBJECT-TYPE
Time zone offsets from Greenwich Mean Time (GMT)
1.3.6.1.4.1.17713.250.9.6INTEGER {gmtMinus1200(0), gmtMinus1130(1), gmtMinus1100(2), gmtMinus1030(3), gmtMinus1000(4), gmtMinus0930(5), gmtMinus0900(6), gmtMinus0830(7), gmtMinus0800(8), gmtMinus0730(9), gmtMinus0700(10), gmtMinus0630(11), gmtMinus0600(12), gmtMinus0530(13), gmtMinus0500(14), gmtMinus0430(15), gmtMinus0400(16), gmtMinus0330(17), gmtMinus0300(18), gmtMinus0230(19), gmtMinus0200(20), gmtMinus0130(21), gmtMinus0100(22), gmtMinus0030(23), gmtZero(24), gmtPlus0030(25), gmtPlus0100(26), gmtPlus0130(27), gmtPlus0200(28), gmtPlus0230(29), gmtPlus0300(30), gmtPlus0330(31), gmtPlus0400(32), gmtPlus0430(33), gmtPlus0500(34), gmtPlus0530(35), gmtPlus0600(36), gmtPlus0630(37), gmtPlus0700(38), gmtPlus0730(39), gmtPlus0800(40), gmtPlus0830(41), gmtPlus0900(42), gmtPlus0930(43), gmtPlus1000(44), gmtPlus1030(45), gmtPlus1100(46), gmtPlus1130(47), gmtPlus1200(48), gmtPlus1230(49), gmtPlus1300(50)}read-onlycurrent
nTPServerIp
OBJECT-TYPE
Specifies the NTP server IP address.
1.3.6.1.4.1.17713.250.9.7IpAddressread-onlycurrent
nTPServerPortNumber
OBJECT-TYPE
Port number of the NTP server
1.3.6.1.4.1.17713.250.9.8Integer32 (0..65535)read-onlycurrent
versions
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.10
softwareVersion
OBJECT-TYPE
Current software version
1.3.6.1.4.1.17713.250.10.1DisplayString (SIZE(0..63))read-onlycurrent
hardwareVersion
OBJECT-TYPE
Hardware platform version
1.3.6.1.4.1.17713.250.10.2DisplayString (SIZE(0..63))read-onlycurrent
bootVersion
OBJECT-TYPE
Boot code software version
1.3.6.1.4.1.17713.250.10.3DisplayString (SIZE(0..63))read-onlycurrent
pubStats
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.11
receiveDataRate
OBJECT-TYPE
Average data rate over the last one second interval (tenths of Mbps)
1.3.6.1.4.1.17713.250.11.1Integer32read-onlycurrent
transmitDataRate
OBJECT-TYPE
Average data rate over the last one second interval (tenths of Mbps)
1.3.6.1.4.1.17713.250.11.2Integer32read-onlycurrent
aggregateDataRate
OBJECT-TYPE
Average data rate over the last one second interval (tenths of Mbps)
1.3.6.1.4.1.17713.250.11.3Integer32read-onlycurrent
wirelessLinkStatus
OBJECT-TYPE
Current status of the wireless link
1.3.6.1.4.1.17713.250.11.4INTEGER {down(0), up(1)}read-onlycurrent
ptpGroups
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.98
ptpTraps
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.99
ptpTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.17713.250.99.0

Notifications

NameOIDStatus
dataPortStatusTrap
NOTIFICATION-TYPE
Status of the Ethernet link has changed.
1.3.6.1.4.1.17713.250.99.0.1current
installArmStateTrap
NOTIFICATION-TYPE
Unit install arm state has changed
1.3.6.1.4.1.17713.250.99.0.2current
noWirelessChannelAvailableTrap
NOTIFICATION-TYPE
Wireless channel availability has changed
1.3.6.1.4.1.17713.250.99.0.3current
linkStatusTrap
NOTIFICATION-TYPE
Wireless link status has changed
1.3.6.1.4.1.17713.250.99.0.4current
radarDetectTrap
NOTIFICATION-TYPE
Radar has been detected on one or more channels
1.3.6.1.4.1.17713.250.99.0.5current

Conformance

NameOIDStatus
ptpCompliance
MODULE-COMPLIANCE
The compliance statement for the Cambium Networks PTP MIB
1.3.6.1.4.1.17713.250.97current
configurationGroup
OBJECT-GROUP
The configuration object group.
1.3.6.1.4.1.17713.250.98.5current
ethernetGroup
OBJECT-GROUP
The ethernet object group.
1.3.6.1.4.1.17713.250.98.6current
licenceGroup
OBJECT-GROUP
The licence object group.
1.3.6.1.4.1.17713.250.98.8current
managementGroup
OBJECT-GROUP
The management object group.
1.3.6.1.4.1.17713.250.98.9current
phyStatusGroup
OBJECT-GROUP
The phyStatus object group.
1.3.6.1.4.1.17713.250.98.12current
alarmsGroup
OBJECT-GROUP
The alarms object group.
1.3.6.1.4.1.17713.250.98.13current
smtpGroup
OBJECT-GROUP
The smtp object group.
1.3.6.1.4.1.17713.250.98.15current
snmpControlGroup
OBJECT-GROUP
The snmpControl object group.
1.3.6.1.4.1.17713.250.98.16current
ntpGroup
OBJECT-GROUP
The ntp object group.
1.3.6.1.4.1.17713.250.98.17current
versionsGroup
OBJECT-GROUP
The versions object group.
1.3.6.1.4.1.17713.250.98.19current
pubStatsGroup
OBJECT-GROUP
The pubStats object group.
1.3.6.1.4.1.17713.250.98.20current
notificationsGroup
NOTIFICATION-GROUP
The notifications group.
1.3.6.1.4.1.17713.250.98.99current