MIBs Depot

CALIX-EOAM-EXT-MIB

Registered at
1.3.6.1.4.1.6321.1.99
Last updated
2011-01-24 00:00
Organization
CALIX, Inc
Namespace
calix
Source file
CALIX-EOAM-EXT-MIB
Digest
sha256:cebdaf85741fbeff59cc9c49a6c6dd4bb47f087fc6c164dea5e7565eb42d90ed

Description

A MIB module that extends the support of Ethernet OAM standards. Extensions are made to IEEE 802.3ah MIB for Link OAM or EFM (Ethernet First Mile) functionality, IEEE 802.1ag MIB for Service OAM or CFM (Connection Fault Management) functionality, including ITU-T Y.1731 entities. This version is compatible with Interport SOAM release 3.0.

Contact

Technical Support Calix Networks 1035 North McDowell Blvd. Petaluma CA 94954 UNITED STATES Tel: +1 707-766-3100 E-mail:

Imports

FromSymbols
IEEE8021-CFM-MIBDot1agCfmCcmInterval, Dot1agCfmIdPermission, Dot1agCfmMDLevel, Dot1agCfmMepId, Dot1agCfmMepIdOrZero, Dot1agCfmMpDirection, Dot1agCfmPbbComponentIdentifier, dot1agCfmLtrReceiveOrder, dot1agCfmLtrSeqNumber, dot1agCfmMaComponentId, dot1agCfmMaIndex, dot1agCfmMaMepListIdentifier, dot1agCfmMdIndex, dot1agCfmMepDbRMepIdentifier, dot1agCfmMepIdentifier
IF-MIBInterfaceIndex, InterfaceIndexOrZero
LLDP-MIBLldpChassisId, LldpChassisIdSubtype, LldpPortId, LldpPortIdSubtype
Q-BRIDGE-MIBVlanId, VlanIdOrNone
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TAddress, TDomain, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
CALIX-EOAM-EXT-MIB
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANAifType-MIB
IEEE8021-CFM-MIB
IEEE8021-TC-MIB
IF-MIB
LLDP-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
CalixEoamEnableType
TEXTUAL-CONVENTION
Enable/disable state.
current
CalixSoamLmType
TEXTUAL-CONVENTION
Single/Dual Frame Loss Measurement Type.
current

Objects

NameOIDSyntaxAccessStatus
calixEoamExtConfig
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.99.1
calixSoamExtMegTable
OBJECT-TYPE
This table contains all ITU-T Y.1731 MEG entries in the system.
1.3.6.1.4.1.6321.1.99.1.1not-accessiblecurrent
calixSoamExtMegEntry
OBJECT-TYPE
The ITU-T Y.1731 MEG entry.
1.3.6.1.4.1.6321.1.99.1.1.1not-accessiblecurrent
calixSoamExtMegIdentifier
OBJECT-TYPE
Index of the MEG entry in the MEG table. There is a common indexing space shared between MAs (IEEE 802.1ag) and MEGs(ITU-T Y.1731).
1.3.6.1.4.1.6321.1.99.1.1.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
calixSoamExtMegName
OBJECT-TYPE
Textual name of the MEG.
1.3.6.1.4.1.6321.1.99.1.1.1.2OCTET STRING (SIZE(1..44))read-createcurrent
calixSoamExtMegLevel
OBJECT-TYPE
Level for the MEG.
1.3.6.1.4.1.6321.1.99.1.1.1.3Dot1agCfmMDLevelread-createcurrent
calixSoamExtMegCcmInterval
OBJECT-TYPE
Interval between CCM transmissions to be used by all MEPs in the MEG.
1.3.6.1.4.1.6321.1.99.1.1.1.4Dot1agCfmCcmIntervalread-createcurrent
calixSoamExtMegVid
OBJECT-TYPE
The Primary VLAN ID with which the MEG is associated, or 0 if the MEG is not attached to any VID. If the MEG is associated with more than one VID, the dot1agCfmVlanTable lists them.
1.3.6.1.4.1.6321.1.99.1.1.1.5Unsigned32 (0..4095)read-createcurrent
calixSoamExtMegAutoDiscovery
OBJECT-TYPE
Specifies if MEP autodiscovery feature is enabled or not for this particular MEG.
1.3.6.1.4.1.6321.1.99.1.1.1.6CalixEoamEnableTyperead-createcurrent
calixSoamExtMegAutoDiscoveryTimeout
OBJECT-TYPE
The timeout value for removal of peer MEPs added through autodetection if no CCM frames are received from that peer MEP.
1.3.6.1.4.1.6321.1.99.1.1.1.7Unsigned32read-createcurrent
calixSoamExtMegCciInterworking
OBJECT-TYPE
Specifies if IEEE 802.1ag compatibility mode is enabled on this MEG.
1.3.6.1.4.1.6321.1.99.1.1.1.8CalixEoamEnableTyperead-createcurrent
calixSoamExtMegIdPermission
OBJECT-TYPE
Enumerated value indicating what, if anything, is to be included in the Sender ID TLV transmitted by MPs configured in this MEG. The value sendIdDefer is not allowed.
1.3.6.1.4.1.6321.1.99.1.1.1.9Dot1agCfmIdPermissionread-createcurrent
calixSoamExtMegRowStatus
OBJECT-TYPE
The status of the row. This field should be used to create or remove a MEG from the system.
1.3.6.1.4.1.6321.1.99.1.1.1.10RowStatusread-createcurrent
calixSoamExtMipTable
OBJECT-TYPE
This table contains all MIPs configured in the system.
1.3.6.1.4.1.6321.1.99.1.2not-accessiblecurrent
calixSoamExtMipEntry
OBJECT-TYPE
Each MIP in the system shall have an entry in this table.
1.3.6.1.4.1.6321.1.99.1.2.1not-accessiblecurrent
calixSoamExtMipIdentifier
OBJECT-TYPE
Unique numerical identifier for the MIP.
1.3.6.1.4.1.6321.1.99.1.2.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
calixSoamExtMipIfIndex
OBJECT-TYPE
This attributes specifies the interface index for the port on which the MIP is attached.
1.3.6.1.4.1.6321.1.99.1.2.1.3InterfaceIndexread-createcurrent
calixSoamExtMipAdminState
OBJECT-TYPE
Administrative state of the MIP.
1.3.6.1.4.1.6321.1.99.1.2.1.4CalixEoamEnableTyperead-createcurrent
calixSoamExtMipMacAddress
OBJECT-TYPE
MAC address of the MIP.
1.3.6.1.4.1.6321.1.99.1.2.1.5MacAddressread-onlycurrent
calixSoamExtMipResetStat
OBJECT-TYPE
True indicates MIPs statistics should be cleared.
1.3.6.1.4.1.6321.1.99.1.2.1.6TruthValueread-createcurrent
calixSoamExtMipRowStatus
OBJECT-TYPE
The status of the row. This attribute is used to create and delete a MIP in the system.
1.3.6.1.4.1.6321.1.99.1.2.1.7RowStatusread-createcurrent
calixSoamExtMipStatsTable
OBJECT-TYPE
This table contains Stats for all MIPs configured in the system.
1.3.6.1.4.1.6321.1.99.1.3not-accessiblecurrent
calixSoamExtMipStatsEntry
OBJECT-TYPE
Stats for a MIP entity.
1.3.6.1.4.1.6321.1.99.1.3.1not-accessiblecurrent
calixSoamExtMipStatsDirection
OBJECT-TYPE
The direction in which the MHF faces for statistics.
1.3.6.1.4.1.6321.1.99.1.3.1.1Dot1agCfmMpDirectionread-createcurrent
calixSoamExtMipStatsLbmIn
OBJECT-TYPE
The number of LBMs received by this MIP.
1.3.6.1.4.1.6321.1.99.1.3.1.2Counter32read-onlycurrent
calixSoamExtMipStatsLbrOut
OBJECT-TYPE
The number of LBRs sent by this MIP.
1.3.6.1.4.1.6321.1.99.1.3.1.3Counter32read-onlycurrent
calixSoamExtMipStatsLtmIn
OBJECT-TYPE
The number of LTMs received by this MIP.
1.3.6.1.4.1.6321.1.99.1.3.1.4Counter32read-onlycurrent
calixSoamExtMipStatsLtmForwarded
OBJECT-TYPE
The number of LTM messages forwarded by MIP.
1.3.6.1.4.1.6321.1.99.1.3.1.5Counter32read-onlycurrent
calixSoamExtMipStatsLtrOut
OBJECT-TYPE
The number of LTR responses sent by this MIP.
1.3.6.1.4.1.6321.1.99.1.3.1.6Counter32read-onlycurrent
calixSoamExtMipStatsLbmInvalidSenderId
OBJECT-TYPE
The total number of received LBM with a bad Sender ID.
1.3.6.1.4.1.6321.1.99.1.3.1.7Counter32read-onlycurrent
calixSoamExtMipStatsDiscards
OBJECT-TYPE
The total number of discarded OAM frames.
1.3.6.1.4.1.6321.1.99.1.3.1.8Counter32read-onlycurrent
calixSoamExtMipStatsResetStat
OBJECT-TYPE
True indicates MEP statistics should be cleared.
1.3.6.1.4.1.6321.1.99.1.3.1.9TruthValueread-createcurrent
calixSoamExtMepDmExtTable
OBJECT-TYPE
This table contains extended attributes and counters for the standard MEP table dot1agCfmMepTable, in order to support Delay Measurement and Delay Variation Measurment functionality.
1.3.6.1.4.1.6321.1.99.1.4not-accessiblecurrent
calixSoamExtMepDmExtEntry
OBJECT-TYPE
MEP Extension (DM and DVM) table for a given MEP object.
1.3.6.1.4.1.6321.1.99.1.4.1not-accessiblecurrent
calixSoamExtMepDmExtActive
OBJECT-TYPE
Use to enable delay measurement.
1.3.6.1.4.1.6321.1.99.1.4.1.1CalixEoamEnableTyperead-createcurrent
calixSoamExtMepDmExtDestMacAddress
OBJECT-TYPE
The Target MAC Address field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column calixSoamExtMepDmExtDestIsMepId is 'False'.
1.3.6.1.4.1.6321.1.99.1.4.1.2MacAddressread-createcurrent
calixSoamExtMepDmExtDestMepId
OBJECT-TYPE
The MEP ID of remote MEP to which the DM is to be sent. This address will be used if the value of the column calixSoamExtMepDmExtDestIsMepId is 'True'.
1.3.6.1.4.1.6321.1.99.1.4.1.3Dot1agCfmMepIdOrZeroread-createcurrent
calixSoamExtMepDmExtDestIsMepId
OBJECT-TYPE
True indicates that MEP ID of the target MEP is used for DM transmission. False indicates that unicast destination MAC address of the target MEP is used for DM transmission.
1.3.6.1.4.1.6321.1.99.1.4.1.4TruthValueread-createcurrent
calixSoamExtMepDmExtClassOfService
OBJECT-TYPE
Specifies the class of service for which the DMM is requested. A value of 8 indicates a full MEP level (CoS agnostic) request.
1.3.6.1.4.1.6321.1.99.1.4.1.5Unsigned32 (0..8)read-createcurrent
calixSoamExtMepDmExtDmPeriod
OBJECT-TYPE
Specifies the delay between two consecutive DM messages.
1.3.6.1.4.1.6321.1.99.1.4.1.6INTEGER {dm1sec(3), dm10sec(4)}read-createcurrent
calixSoamExtMepDmExtMaxRtdThrSet
OBJECT-TYPE
The maximum round trip delay threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.4.1.7Unsigned32 (0..100000)read-createcurrent
calixSoamExtMepDmExtMaxRtdThrClr
OBJECT-TYPE
The maximum round trip delay threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.4.1.8Unsigned32 (0..100000)read-createcurrent
calixSoamExtMepDmExtAvgRtdThrSet
OBJECT-TYPE
The average round trip delay threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.4.1.9Unsigned32 (0..100000)read-createcurrent
calixSoamExtMepDmExtAvgRtdThrClr
OBJECT-TYPE
The average round trip delay threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.4.1.10Unsigned32 (0..100000)read-createcurrent
calixSoamExtMepDmExtMaxRtdVarThrSet
OBJECT-TYPE
The maximum round trip delay variation threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.4.1.11Unsigned32 (0..100000)read-createcurrent
calixSoamExtMepDmExtMaxRtdVarThrClr
OBJECT-TYPE
The maximum round trip delay variation threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.4.1.12Unsigned32 (0..100000)read-createcurrent
calixSoamExtMepDmExtAvgRtdVarThrSet
OBJECT-TYPE
The average round trip delay variation threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.4.1.13Unsigned32 (0..100000)read-createcurrent
calixSoamExtMepDmExtAvgRtdVarThrClr
OBJECT-TYPE
The average round trip delay variation threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.4.1.14Unsigned32 (0..100000)read-createcurrent
calixSoamExtMepDmExtAvgRoundTripDelay
OBJECT-TYPE
The average round trip delay for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.15Unsigned32read-onlycurrent
calixSoamExtMepDmExtMinRoundTripDelay
OBJECT-TYPE
The minimum round trip delay for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.16Unsigned32read-onlycurrent
calixSoamExtMepDmExtMaxRoundTripDelay
OBJECT-TYPE
The maximum round trip delay for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.17Unsigned32read-onlycurrent
calixSoamExtMepDmExtAvgRoundTripDelayVariation
OBJECT-TYPE
The average round trip delay variation for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.18Unsigned32read-onlycurrent
calixSoamExtMepDmExtMinRoundTripDelayVariation
OBJECT-TYPE
The minimum round trip delay variation for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.19Unsigned32read-onlycurrent
calixSoamExtMepDmExtMaxRoundTripDelayVariation
OBJECT-TYPE
The maximum round trip delay variation for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.20Unsigned32read-onlycurrent
calixSoamExtMepDmExtAvgRoundTripProcessingDelay
OBJECT-TYPE
The average processing delay for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.21Unsigned32read-onlycurrent
calixSoamExtMepDmExtMinRoundTripProcessingDelay
OBJECT-TYPE
The minimum round trip delay variation for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.22Unsigned32read-onlycurrent
calixSoamExtMepDmExtMaxRoundTripProcessingDelay
OBJECT-TYPE
The maximum round trip delay variation for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.23Unsigned32read-onlycurrent
calixSoamExtMepDmExtDataLength
OBJECT-TYPE
Length of data TLV in delay measurement frame.
1.3.6.1.4.1.6321.1.99.1.4.1.24Unsigned32read-createcurrent
calixSoamExtMepDmExtDataPattern
OBJECT-TYPE
Data pattern copied into data TLV.
1.3.6.1.4.1.6321.1.99.1.4.1.25Unsigned32read-createcurrent
calixSoamExtMepLmExtTable
OBJECT-TYPE
This table contains extended attributes and counters for the standard MEP table dot1agCfmMepTable, in order to support FLM on demand functionality.
1.3.6.1.4.1.6321.1.99.1.5not-accessiblecurrent
calixSoamExtMepLmExtEntry
OBJECT-TYPE
MEP Extension (FLM) table for a given MEP object
1.3.6.1.4.1.6321.1.99.1.5.1not-accessiblecurrent
calixSoamExtMepLmExtActive
OBJECT-TYPE
Use to enable frame delay measurement.
1.3.6.1.4.1.6321.1.99.1.5.1.1CalixEoamEnableTyperead-createcurrent
calixSoamExtMepLmExtDestMacAddress
OBJECT-TYPE
The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column calixSoamExtMepLmExtDestIsMepId is 'False'.
1.3.6.1.4.1.6321.1.99.1.5.1.2MacAddressread-createcurrent
calixSoamExtMepLmExtDestMepId
OBJECT-TYPE
The MEP ID of remote MEP to which the FLM is to be sent. This address will be used if the value of the column calixSoamExtMepLmExtDestIsMepId is 'True'.
1.3.6.1.4.1.6321.1.99.1.5.1.3Dot1agCfmMepIdOrZeroread-createcurrent
calixSoamExtMepLmExtDestIsMepId
OBJECT-TYPE
True indicates that MEPID is used for FLM transmission. False indicates that unicast destination MAC address is used for FLM transmission.
1.3.6.1.4.1.6321.1.99.1.5.1.4TruthValueread-createcurrent
calixSoamExtMepLmExtLmType
OBJECT-TYPE
Specifies the type of Frame Loss Measurement: Single or Dual.
1.3.6.1.4.1.6321.1.99.1.5.1.5CalixSoamLmTyperead-createcurrent
calixSoamExtMepLmExtClassOfService
OBJECT-TYPE
Specifies the class of service for which the FLM is requested. A value of 8 indicates a full MEP level (CoS agnostic) request.
1.3.6.1.4.1.6321.1.99.1.5.1.6Unsigned32 (0..8)read-createcurrent
calixSoamExtMepLmExtLmPeriod
OBJECT-TYPE
Specifies the delay between two consecutive FLM messages
1.3.6.1.4.1.6321.1.99.1.5.1.7INTEGER {lm100ms(1), lm1sec(2), lm10sec(3)}read-createcurrent
calixSoamExtMepLmExtMaxNearEndLossThrSet
OBJECT-TYPE
The maximum near end frame loss threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.5.1.8Unsigned32 (0..1000000)read-createcurrent
calixSoamExtMepLmExtMaxNearEndLossThrClr
OBJECT-TYPE
The maximum near end frame loss threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.5.1.9Unsigned32 (0..1000000)read-createcurrent
calixSoamExtMepLmExtAvgNearEndLossThrSet
OBJECT-TYPE
The average near end frame loss threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.5.1.10Unsigned32 (0..1000000)read-createcurrent
calixSoamExtMepLmExtAvgNearEndLossThrClr
OBJECT-TYPE
The average near end frame loss threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.5.1.11Unsigned32 (0..1000000)read-createcurrent
calixSoamExtMepLmExtMaxFarEndLossThrSet
OBJECT-TYPE
The maximum far end loss threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.5.1.12Unsigned32 (0..1000000)read-createcurrent
calixSoamExtMepLmExtMaxFarEndLossThrClr
OBJECT-TYPE
The maximum far end loss threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.5.1.13Unsigned32 (0..1000000)read-createcurrent
calixSoamExtMepLmExtAvgFarEndLossThrSet
OBJECT-TYPE
The average far end loss threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.5.1.14Unsigned32 (0..1000000)read-createcurrent
calixSoamExtMepLmExtAvgFarEndLossThrClr
OBJECT-TYPE
The average far end loss threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.5.1.15Unsigned32 (0..1000000)read-createcurrent
calixSoamExtMepLmExtNearEndLostPkts
OBJECT-TYPE
Number of frames lost at the near end.
1.3.6.1.4.1.6321.1.99.1.5.1.16Counter32read-onlycurrent
calixSoamExtMepLmExtNearEndLossRatio
OBJECT-TYPE
Frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.17Unsigned32read-onlycurrent
calixSoamExtMepLmExtMaxNearEndLossRatio
OBJECT-TYPE
Maximum frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.18Unsigned32read-onlycurrent
calixSoamExtMepLmExtMinNearEndLossRatio
OBJECT-TYPE
Minimum frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.19Unsigned32read-onlycurrent
calixSoamExtMepLmExtAvgNearEndLossRatio
OBJECT-TYPE
Average frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.20Unsigned32read-onlycurrent
calixSoamExtMepLmExtFarEndLostPkts
OBJECT-TYPE
Number of frames lost at the far end.
1.3.6.1.4.1.6321.1.99.1.5.1.21Counter32read-onlycurrent
calixSoamExtMepLmExtFarEndLossRatio
OBJECT-TYPE
Frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.22Unsigned32read-onlycurrent
calixSoamExtMepLmExtMaxFarEndLossRatio
OBJECT-TYPE
Maximum frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.23Unsigned32read-onlycurrent
calixSoamExtMepLmExtMinFarEndLossRatio
OBJECT-TYPE
Minimum frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.24Unsigned32read-onlycurrent
calixSoamExtMepLmExtAvgFarEndLossRatio
OBJECT-TYPE
Average frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.25Unsigned32read-onlycurrent
calixSoamExtMepMcastLoopbackSessionTable
OBJECT-TYPE
This table is used to initiate a multicast loopback request for a given MEP.
1.3.6.1.4.1.6321.1.99.1.6not-accessiblecurrent
calixSoamExtMepMcastLoopbackSessionEntry
OBJECT-TYPE
Each MEP can have only one active Multicast Loopback Request at a given time.
1.3.6.1.4.1.6321.1.99.1.6.1not-accessiblecurrent
calixSoamExtMepMcastLoopbackSessionStatus
OBJECT-TYPE
Specifies the status of the Multicast Loopback request for the particular ITU-T Y.1731 MEP. In order to activate a new session, write 'activate' in this variable.
1.3.6.1.4.1.6321.1.99.1.6.1.1INTEGER {none(1), inProgress(2), completed(3), activate(4), failed(5)}read-createcurrent
calixSoamExtMepMcastLoopbackSessionReplies
OBJECT-TYPE
Indicates the number of replies received for this multicast loopback session.
1.3.6.1.4.1.6321.1.99.1.6.1.2Unsigned32read-onlycurrent
calixSoamExtMepMcastLoopbackResultsTable
OBJECT-TYPE
This table is used to read the results of a multicast loopback request for a given MEP.
1.3.6.1.4.1.6321.1.99.1.7not-accessiblecurrent
calixSoamExtMepMcastLoopbackResultsEntry
OBJECT-TYPE
Each MEP can have only one active Multicast Loopback Request at a given time. This table presents the results of the last request indexed by the reply order.
1.3.6.1.4.1.6321.1.99.1.7.1not-accessiblecurrent
calixSoamExtMepMcastLoopbackResultsIndex
OBJECT-TYPE
Specifies the index of the multicast loopback result.
1.3.6.1.4.1.6321.1.99.1.7.1.1Unsigned32not-accessiblecurrent
calixSoamExtMepMcastLoopbackResultsMacAddress
OBJECT-TYPE
MAC address for the received reply.
1.3.6.1.4.1.6321.1.99.1.7.1.2MacAddressread-onlycurrent
calixSoamExtMepStatsExtTable
OBJECT-TYPE
This table contains extensions of the dot1agCfmMepTable for MEP Statistics.
1.3.6.1.4.1.6321.1.99.1.8not-accessiblecurrent
calixSoamExtMepStatsExtEntry
OBJECT-TYPE
Extended counters and attributes for MEP configuration.
1.3.6.1.4.1.6321.1.99.1.8.1not-accessiblecurrent
calixSoamExtMepStatsExtCcmRdiSent
OBJECT-TYPE
The total number of sent CCMs with RDI bit set.
1.3.6.1.4.1.6321.1.99.1.8.1.1Counter32read-onlycurrent
calixSoamExtMepStatsExtCcmReceived
OBJECT-TYPE
The total number of CCMs received from all remote MEPs.
1.3.6.1.4.1.6321.1.99.1.8.1.2Counter32read-onlycurrent
calixSoamExtMepStatsExtCcmInvalidSenderId
OBJECT-TYPE
The total number of CCMs with invalid Sender ID TLV received from all remote MEPs.
1.3.6.1.4.1.6321.1.99.1.8.1.3Counter32read-onlycurrent
calixSoamExtMepStatsExtCcmInvalidPortStatus
OBJECT-TYPE
The total number of CCMs with invalid Port Status TLV received from all remote MEPs.
1.3.6.1.4.1.6321.1.99.1.8.1.4Counter32read-onlycurrent
calixSoamExtMepStatsExtCcmInvalidIfStatus
OBJECT-TYPE
The total number of CCMs with invalid Interface Status TLV received from all remote MEPs.
1.3.6.1.4.1.6321.1.99.1.8.1.5Counter32read-onlycurrent
calixSoamExtMepStatsExtCcmRdiReceived
OBJECT-TYPE
The total number of CCMs with RDI bit set received from all remote MEPs.
1.3.6.1.4.1.6321.1.99.1.8.1.6Counter32read-onlycurrent
calixSoamExtMepStatsExtLbmReceived
OBJECT-TYPE
The total number of LBM messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.7Counter32read-onlycurrent
calixSoamExtMepStatsExtLbmSent
OBJECT-TYPE
The total number of LBM messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.8Counter32read-onlycurrent
calixSoamExtMepStatsExtLbmInvalidSenderId
OBJECT-TYPE
The total number of LBM messages received with a bad sender ID.
1.3.6.1.4.1.6321.1.99.1.8.1.9Counter32read-onlycurrent
calixSoamExtMepStatsExtLbrInvalidSenderId
OBJECT-TYPE
The total number of LBR messages received with a bad sender ID.
1.3.6.1.4.1.6321.1.99.1.8.1.10Counter32read-onlycurrent
calixSoamExtMepStatsExtLtmReceived
OBJECT-TYPE
The total number of LTM messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.11Counter32read-onlycurrent
calixSoamExtMepStatsExtLtmSent
OBJECT-TYPE
The total number of LTM messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.12Counter32read-onlycurrent
calixSoamExtMepStatsExtLtrInvalidMac
OBJECT-TYPE
The total number of LTR messages received with a bad MAC address.
1.3.6.1.4.1.6321.1.99.1.8.1.13Counter32read-onlycurrent
calixSoamExtMepStatsExtLtrReceived
OBJECT-TYPE
The total number of LTR messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.14Counter32read-onlycurrent
calixSoamExtMepStatsExtLtrSent
OBJECT-TYPE
The total number of LTR messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.15Counter32read-onlycurrent
calixSoamExtMepStatsExtLmmReceived
OBJECT-TYPE
The total number of LMM messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.16Counter32read-onlycurrent
calixSoamExtMepStatsExtLmmSent
OBJECT-TYPE
The total number of LMM messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.17Counter32read-onlycurrent
calixSoamExtMepStatsExtLmrReceived
OBJECT-TYPE
The total number of LMR messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.18Counter32read-onlycurrent
calixSoamExtMepStatsExtLmrSent
OBJECT-TYPE
The total number of LMR messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.19Counter32read-onlycurrent
calixSoamExtMepStatsExtDmmReceived
OBJECT-TYPE
The total number of DMM messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.20Counter32read-onlycurrent
calixSoamExtMepStatsExtDmmSent
OBJECT-TYPE
The total number of DMM messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.21Counter32read-onlycurrent
calixSoamExtMepStatsExtDmrReceived
OBJECT-TYPE
The total number of DMR messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.22Counter32read-onlycurrent
calixSoamExtMepStatsExtDmrSent
OBJECT-TYPE
The total number of DMR messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.23Counter32read-onlycurrent
calixSoamExtMepStatsExtResetStat
OBJECT-TYPE
True indicates MEP statistics should be cleared.
1.3.6.1.4.1.6321.1.99.1.8.1.24TruthValueread-createcurrent
calixSoamExtMepUcastLoopbackResultsTable
OBJECT-TYPE
This table contains Unicast Loopback protocol results for corresponding MEP.
1.3.6.1.4.1.6321.1.99.1.9not-accessiblecurrent
calixSoamExtMepUcastLoopbackResultsEntry
OBJECT-TYPE
Unicast Loopback result for corresponding MEP.
1.3.6.1.4.1.6321.1.99.1.9.1not-accessiblecurrent
calixSoamExtMepUcastLoopbackResultsLbmFirstSeqNumber
OBJECT-TYPE
The Loopback Transaction Identifier of the first LBM sent. This value can be obtained from dot1agCfmMepTransmitLbmSeqNumber of dot1agCfmMepTable table after Loopback transmitting.
1.3.6.1.4.1.6321.1.99.1.9.1.1Unsigned32read-onlycurrent
calixSoamExtMepUcastLoopbackResultsDestMacAddress
OBJECT-TYPE
The MAC Address of destination MP.
1.3.6.1.4.1.6321.1.99.1.9.1.2MacAddressread-onlycurrent
calixSoamExtMepUcastLoopbackResultsStatus
OBJECT-TYPE
Specifies the state of the current Loopback request.
1.3.6.1.4.1.6321.1.99.1.9.1.3INTEGER {none(0), inProgress(1), failed(2), succeeded(3)}read-onlycurrent
calixSoamExtMepUcastLoopbackResultsLbmOut
OBJECT-TYPE
Loopback Messages sent.
1.3.6.1.4.1.6321.1.99.1.9.1.4Counter32read-onlycurrent
calixSoamExtMepUcastLoopbackResultsLbrIn
OBJECT-TYPE
Loopback replies received.
1.3.6.1.4.1.6321.1.99.1.9.1.5Counter32read-onlycurrent
calixSoamExtCfgTable
OBJECT-TYPE
This table contains Unicast Loopback protocol results for corresponding MEP.
1.3.6.1.4.1.6321.1.99.1.10not-accessiblecurrent
calixSoamExtCfgEntry
OBJECT-TYPE
General Service OAM Configuration Table.
1.3.6.1.4.1.6321.1.99.1.10.1not-accessiblecurrent
calixSoamExtCfgIndex
OBJECT-TYPE
Index of auto instantited configuration MIB. Must be 1.
1.3.6.1.4.1.6321.1.99.1.10.1.1Unsigned32read-createcurrent
calixSoamExtCfgAdminState
OBJECT-TYPE
State of Service level Ethernet OAM. Set this to enable to begin transmitting Ethernet OAM frames from configures MEG/MEPs.
1.3.6.1.4.1.6321.1.99.1.10.1.2CalixEoamEnableTyperead-createcurrent
calixSoamExtCfgPermission
OBJECT-TYPE
Default permission level determining which optional TLVs to include.
1.3.6.1.4.1.6321.1.99.1.10.1.3Dot1agCfmIdPermissionread-createcurrent
calixSoamExtCfgChassisIdSubtype
OBJECT-TYPE
Chassis ID Subtype.
1.3.6.1.4.1.6321.1.99.1.10.1.4LldpChassisIdSubtyperead-createcurrent
calixSoamExtCfgChassisId
OBJECT-TYPE
Chassis ID.
1.3.6.1.4.1.6321.1.99.1.10.1.5LldpChassisIdread-createcurrent
calixSoamExtCfgManAddressDomain
OBJECT-TYPE
Management Domain.
1.3.6.1.4.1.6321.1.99.1.10.1.6TDomainread-createcurrent
calixSoamExtCfgManAddress
OBJECT-TYPE
Management Address.
1.3.6.1.4.1.6321.1.99.1.10.1.7TAddressread-createcurrent
calixSoamExtCfgCcmOptTlvSenderId
OBJECT-TYPE
Enable to include sender ID TLV in CCM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.8CalixEoamEnableTyperead-createcurrent
calixSoamExtCfgCcmOptTlvPortStatus
OBJECT-TYPE
Enable to include Port Status TLV in CCM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.9CalixEoamEnableTyperead-createcurrent
calixSoamExtCfgCcmOptTlvIfStatus
OBJECT-TYPE
Enable to include Interface Status TLV in CCM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.10CalixEoamEnableTyperead-createcurrent
calixSoamExtCfgLtmOptTlvSenderId
OBJECT-TYPE
Enable to include Sender ID TLV in LTM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.11CalixEoamEnableTyperead-createcurrent
calixSoamExtCfgLbmOptTlvSenderId
OBJECT-TYPE
Enable to include Sender ID TLV in LBM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.12CalixEoamEnableTyperead-createcurrent
calixSoamExtCfgLbmOptTlvIfStatus
OBJECT-TYPE
Enable to include Interface Status TLV in LBM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.13CalixEoamEnableTyperead-createcurrent
calixSoamExtCfgLbmOptTlvData
OBJECT-TYPE
Enable to include Data TLV in LBM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.14CalixEoamEnableTyperead-createcurrent
calixSoamExtCfgDmmOptTlvData
OBJECT-TYPE
Enable to include Data TLV in DMM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.15CalixEoamEnableTyperead-createcurrent
calixLoamExtCfgTable
OBJECT-TYPE
This table contains settings for enabling/disabling the Link OAM feature.
1.3.6.1.4.1.6321.1.99.1.11not-accessiblecurrent
calixLoamExtCfgEntry
OBJECT-TYPE
General Link OAM Configuration Table.
1.3.6.1.4.1.6321.1.99.1.11.1not-accessiblecurrent
calixLoamExtCfgIndex
OBJECT-TYPE
Index of auto instantiated configuration MIB. Must be 1.
1.3.6.1.4.1.6321.1.99.1.11.1.1Unsigned32read-createcurrent
calixLoamExtCfgAdminState
OBJECT-TYPE
State of Service level Ethernet OAM. Set this to enable to begin transmitting Ethernet OAM frames from configures MEG/MEPs.
1.3.6.1.4.1.6321.1.99.1.11.1.2CalixEoamEnableTyperead-writecurrent
calixRfc2544CfgTable
OBJECT-TYPE
This table places a port in RFC2544 Reflector Mode.
1.3.6.1.4.1.6321.1.99.1.12not-accessiblecurrent
calixRfc2544CfgEntry
OBJECT-TYPE
Only one port can be in RFC 2544 Reflector Mode at any given time.
1.3.6.1.4.1.6321.1.99.1.12.1not-accessiblecurrent
calixRfc2544CfgIndex
OBJECT-TYPE
Index of auto instantiated RFC 2544 configuration MIB. Must be 1.
1.3.6.1.4.1.6321.1.99.1.12.1.1Unsigned32read-createcurrent
calixRfc2544CfgAdminState
OBJECT-TYPE
Administrative state of the RFC 2544 Reflector.
1.3.6.1.4.1.6321.1.99.1.12.1.2CalixEoamEnableTyperead-createcurrent
calixRfc2544CfgIfIndex
OBJECT-TYPE
This attributes specifies the interface index for the port in RFC 2544 Reflector Mode.
1.3.6.1.4.1.6321.1.99.1.12.1.3InterfaceIndexread-writecurrent
calixRfc2544CfgVlanId
OBJECT-TYPE
VLAN ID of Service.
1.3.6.1.4.1.6321.1.99.1.12.1.4VlanIdread-writecurrent
calixRfc2544CfgMacAddress
OBJECT-TYPE
Destination MAC address of frames to reflect.
1.3.6.1.4.1.6321.1.99.1.12.1.5MacAddressread-writecurrent