CABLE-DIAG-MIB
- Registered at
- 1.3.6.1.4.1.171.12.58
- Last updated
- 1908-08-11 00:00
- Organization
- D-Link, Inc.
- Namespace
- dlink
- Source file
CABLE-DIAG-MIB- Digest
sha256:984909cbe63a799b998049725aad44579277364262a6b51b26c9b690e15b9783
Description
The MIB module for determining the status of the cables attached to the device
Contact
D-Link Customer Service Postal: No.20, Park Ave,II, Science-based Industrial Park, Hsinchu, Taiwan, R.O.C. Tel: 886-3-577-9966 Email:
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CABLE-DIAG-MIB DLINK-ID-REC-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| swCableDiagCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.58.1 | |||
| swEtherCableDiagTable OBJECT-TYPE A table that contains the cable situation for each port. | 1.3.6.1.4.1.171.12.58.1.1 | not-accessible | current | |
| swEtherCableDiagEntry OBJECT-TYPE A list of cable situations for each port on the device. | 1.3.6.1.4.1.171.12.58.1.1.1 | not-accessible | current | |
| swEtherCableDiagPortIndex OBJECT-TYPE This object indicates the module's port number.(1..Max port number in the module) | 1.3.6.1.4.1.171.12.58.1.1.1.1 | INTEGER (0..65535) | read-only | current |
| swEtherCableDiagPortType OBJECT-TYPE Indicates the supported port data rate classification. | 1.3.6.1.4.1.171.12.58.1.1.1.2 | INTEGER {fastEthernet(0), gigaEthernet(1), other(2)} | read-only | current |
| swEtherCableDiagLinkStatus OBJECT-TYPE This object indicates the link status. | 1.3.6.1.4.1.171.12.58.1.1.1.3 | INTEGER {link-down(0), link-up(1), other(2)} | read-only | current |
| swEtherCableDiagPair1Status OBJECT-TYPE This object indicates the status of pair 1 of the cable. | 1.3.6.1.4.1.171.12.58.1.1.1.4 | INTEGER {ok(0), open(1), short(2), open-short(3), crosstalk(4), unknown(5), count(6), no-cable(7), other(8)} | read-only | current |
| swEtherCableDiagPair2Status OBJECT-TYPE This object indicates the status of pair 2 of the cable. | 1.3.6.1.4.1.171.12.58.1.1.1.5 | INTEGER {ok(0), open(1), short(2), open-short(3), crosstalk(4), unknown(5), count(6), no-cable(7), other(8)} | read-only | current |
| swEtherCableDiagPair3Status OBJECT-TYPE This object indicates the status of pair 3 of the cable. | 1.3.6.1.4.1.171.12.58.1.1.1.6 | INTEGER {ok(0), open(1), short(2), open-short(3), crosstalk(4), unknown(5), count(6), no-cable(7), other(8)} | read-only | current |
| swEtherCableDiagPair4Status OBJECT-TYPE This object indicates the status of pair 4 of the cable. | 1.3.6.1.4.1.171.12.58.1.1.1.7 | INTEGER {ok(0), open(1), short(2), open-short(3), crosstalk(4), unknown(5), count(6), no-cable(7), other(8)} | read-only | current |
| swEtherCableDiagPair1Length OBJECT-TYPE This object indicates the approx. length or length to the failure of pair 1 of the cable. This value is in meter units. | 1.3.6.1.4.1.171.12.58.1.1.1.8 | INTEGER | read-only | current |
| swEtherCableDiagPair2Length OBJECT-TYPE This object indicates the approx. length or length to the failure of pair 2 of the cable. This value is in meter units. | 1.3.6.1.4.1.171.12.58.1.1.1.9 | INTEGER | read-only | current |
| swEtherCableDiagPair3Length OBJECT-TYPE This object indicates the approx. length or length to the failure of pair 3 of the cable. This value is in meter units. | 1.3.6.1.4.1.171.12.58.1.1.1.10 | INTEGER | read-only | current |
| swEtherCableDiagPair4Length OBJECT-TYPE This object indicates the approx. length or length to the failure of pair 4 of the cable. This value is in meter units. | 1.3.6.1.4.1.171.12.58.1.1.1.11 | INTEGER | read-only | current |
| swEtherCableDiagAction OBJECT-TYPE Function to run the cable diagnostic on selected port. | 1.3.6.1.4.1.171.12.58.1.1.1.12 | INTEGER {action(1), processing(2), other(3)} | read-write | current |
| swEtherCableDiagStatus OBJECT-TYPE Indicates the status of cable diagnostics on the port. not-run - cable diagnostics has never been run for this port processing - cable diagnostics is currently running on the port last-test-ok - the last cable diagnostics done on the port was successful last-test-failed - the last cable diagnostics done on the port failed | 1.3.6.1.4.1.171.12.58.1.1.1.13 | INTEGER {not-run(1), processing(2), last-test-ok(3), last-test-failed(4)} | read-only | current |