BroadworksMaintenance
- Registered at
- 1.3.6.1.4.1.6431.1.1
- Last updated
- 2005-08-16 10:00
- Organization
- Broadsoft, Inc
- Revisions
- 2006-06-09 09:30, 2006-03-23 19:35, 2005-08-16 10:00, 2000-09-19 14:31
- Namespace
- broadsoft
- Source file
BroadworksMaintenance- Digest
sha256:8cd389f63fbb72d87f436f5182e7063eb2966a8b9a0858ae067a54bff4b0d60d
Description
This is the System Management Information structure for the Broadsoft enterprise.
Contact
Broadsoft, Inc 220 Perry Parkway Gaithersburg, MD 20877 301-977-9440
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BroadworksMaintenance SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| broadworks OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1 | |||
| common OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1 | |||
| managedObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.2 | |||
| moServerModule OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.2.1 | |||
| bwServerType OBJECT-TYPE Gives the broadworks server type: { Application Server | Network Server | Media Server | Relay Server } | 1.3.6.1.4.1.6431.1.1.2.1.1 | DisplayString | read-only | current |
| bwRedundancyType OBJECT-TYPE Gives the broadworks server redundancy type: { Primary | Secondary | NotRedundant } | 1.3.6.1.4.1.6431.1.1.2.1.2 | INTEGER {nonRedundant(0), primary(1), seconday(2)} | read-only | current |
| bwActiveSoftwareVersion OBJECT-TYPE Gives the version of the active software version. An operator can change the active software version by setting this field. | 1.3.6.1.4.1.6431.1.1.2.1.3 | DisplayString | read-only | current |
| bwAdminState OBJECT-TYPE Server admin state. 0- Lock, 1- Locking, 2- Unlock, 3- ShuttingDown, 4- Stopped, 5- Forced Lock | 1.3.6.1.4.1.6431.1.1.2.1.4 | INTEGER {lock(0), locking(1), unlock(2), shuttingDown(3), stopped(4), forceLock(5)} | read-write | current |
| bwOperationalState OBJECT-TYPE Server operational state. 0- Enabled, 1- Disabled | 1.3.6.1.4.1.6431.1.1.2.1.5 | INTEGER {enabled(0), disabled(1)} | read-only | current |
| bwResetServer OBJECT-TYPE Remotely reset the BroadWorks server. The reset action kicks in when the counter is set to 1. | 1.3.6.1.4.1.6431.1.1.2.1.6 | INTEGER {set(0), reset(1), hardReset(2), revertReset(3), hardRevertReset(4)} | read-write | current |
| bwSubComponentTable OBJECT-TYPE This table exposes some key BroadWorks server sub components. It may or may not be empty depending on the server | 1.3.6.1.4.1.6431.1.1.2.1.7 | not-accessible | current | |
| bwSubComponentEntry OBJECT-TYPE This row contains information about a software component in the system | 1.3.6.1.4.1.6431.1.1.2.1.7.1 | not-accessible | current | |
| bwSubComponentIndex OBJECT-TYPE This integer represents the a software component index in the system | 1.3.6.1.4.1.6431.1.1.2.1.7.1.1 | Unsigned32 | read-only | current |
| bwSubComponentName OBJECT-TYPE The name of an exposed subcomponent | 1.3.6.1.4.1.6431.1.1.2.1.7.1.2 | DisplayString | read-only | current |
| bwSubComponentInfo OBJECT-TYPE Displays status information about the component | 1.3.6.1.4.1.6431.1.1.2.1.7.1.3 | DisplayString | read-only | current |
| bwTargetSoftwareVersion OBJECT-TYPE Gives the target software version. If the server is reset, the active server software version will be updated. | 1.3.6.1.4.1.6431.1.1.2.1.8 | DisplayString | read-write | current |
| bwRevertBackupLocation OBJECT-TYPE Gives the location of the backup file to use if using the revert option of the reset command. | 1.3.6.1.4.1.6431.1.1.2.1.9 | DisplayString | read-write | current |
| moSoftwareVersionModule OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.2.2 | |||
| bwUpdateSoftwareVersionTable OBJECT-TYPE This counter is used to reload the installed software table. To do so, just set this register to 1 (reload) | 1.3.6.1.4.1.6431.1.1.2.2.1 | INTEGER {idle(0), reload(1)} | read-write | current |
| bwSoftwareVersionTable OBJECT-TYPE This table has an entry per software version installed on the server | 1.3.6.1.4.1.6431.1.1.2.2.2 | not-accessible | current | |
| bwSoftwareVersionEntry OBJECT-TYPE This row contains information on a particular braodworks software version installed on the server | 1.3.6.1.4.1.6431.1.1.2.2.2.1 | not-accessible | current | |
| bwSoftwareVersionIndex OBJECT-TYPE This integer represents the a group index in the system | 1.3.6.1.4.1.6431.1.1.2.2.2.1.1 | Unsigned32 | read-only | current |
| bwSoftwareVersionName OBJECT-TYPE The name of a software load installed on the server. | 1.3.6.1.4.1.6431.1.1.2.2.2.1.2 | DisplayString | read-only | current |
| bwSoftwareVersionInstallDate OBJECT-TYPE Installation date for this software version. | 1.3.6.1.4.1.6431.1.1.2.2.2.1.3 | DisplayString | read-only | current |
| bwSoftwareVersionStatus OBJECT-TYPE The status of a software version. | 1.3.6.1.4.1.6431.1.1.2.2.2.1.4 | INTEGER {installed(0), active(1)} | read-only | current |
| bwSoftwarePatchTable OBJECT-TYPE This table has an entry per service packs installed for each sofware versions | 1.3.6.1.4.1.6431.1.1.2.2.3 | not-accessible | current | |
| bwSoftwarePatchEntry OBJECT-TYPE This row contains information on a particular braodworks patch installed on the server | 1.3.6.1.4.1.6431.1.1.2.2.3.1 | not-accessible | current | |
| bwSoftwarePatchIndex OBJECT-TYPE This integer an index of a patch installed in the system | 1.3.6.1.4.1.6431.1.1.2.2.3.1.1 | Unsigned32 | read-only | current |
| bwSoftwarePatchVersionName OBJECT-TYPE The name of a software load for which this patch applies. This field was obsoleted in BroadWorks release 14.0. | 1.3.6.1.4.1.6431.1.1.2.2.3.1.2 | DisplayString | read-only | obsolete |
| bwSoftwarePatchName OBJECT-TYPE Patch name. | 1.3.6.1.4.1.6431.1.1.2.2.3.1.3 | DisplayString | read-only | current |
| bwSoftwarePatchType OBJECT-TYPE Patch type. This field was obsoleted in BroadWorks release 14.0. | 1.3.6.1.4.1.6431.1.1.2.2.3.1.4 | DisplayString | read-only | obsolete |
| bwSoftwarePatchInstallDate OBJECT-TYPE This field was obsoleted in BroadWorks release 14.0. | 1.3.6.1.4.1.6431.1.1.2.2.3.1.5 | DisplayString | read-only | obsolete |
| bwSoftwarePatchState OBJECT-TYPE The state of the patch. | 1.3.6.1.4.1.6431.1.1.2.2.3.1.6 | INTEGER {installed(0), active(1), installedPendingActive(2), activePendingInstalled(3), deleted(4), installedMissingDependencies(5)} | read-only | current |
| bwSoftwarePatchOperation OBJECT-TYPE This field was obsoleted in BroadWorks release 14.0. | 1.3.6.1.4.1.6431.1.1.2.2.3.1.7 | INTEGER {none(0), apply(1), remove(2), delete(3)} | read-write | obsolete |
| bwSoftwarePatchBundle OBJECT-TYPE Patch Bundle name of the patch. | 1.3.6.1.4.1.6431.1.1.2.2.3.1.8 | DisplayString | read-only | current |
| bwSoftwareThirdPartyTable OBJECT-TYPE This table has an entry for third party software version used by the BroadWorks server | 1.3.6.1.4.1.6431.1.1.2.2.4 | not-accessible | current | |
| bwSoftwareThirdPartyEntry OBJECT-TYPE This row contains information on an installed 3rd party software version | 1.3.6.1.4.1.6431.1.1.2.2.4.1 | not-accessible | current | |
| bwSoftwareThirdPartyIndex OBJECT-TYPE This integer represents the a group index in the system | 1.3.6.1.4.1.6431.1.1.2.2.4.1.1 | Unsigned32 | read-only | current |
| bwSoftwareThirdPartyName OBJECT-TYPE The name of a software load for which this service pack applies | 1.3.6.1.4.1.6431.1.1.2.2.4.1.2 | DisplayString | read-only | current |
| bwSoftwareThirdPartyVersion OBJECT-TYPE A 3rd party software version id | 1.3.6.1.4.1.6431.1.1.2.2.4.1.3 | DisplayString | read-only | current |
| bwSoftwareThirdPartyStatus OBJECT-TYPE The status of a 3rd party software version. | 1.3.6.1.4.1.6431.1.1.2.2.4.1.4 | INTEGER {installed(0), active(1)} | read-only | current |
| bwSoftwarePatchHistoryTable OBJECT-TYPE This table contains information about all operation performed on patches. | 1.3.6.1.4.1.6431.1.1.2.2.5 | not-accessible | current | |
| bwSoftwarePatchHistoryEntry OBJECT-TYPE Entry of the patch history table containing history of operations applied to patches. | 1.3.6.1.4.1.6431.1.1.2.2.5.1 | not-accessible | current | |
| bwSoftwarePatchHistoryIndex OBJECT-TYPE This integer an index of a patch operation history. | 1.3.6.1.4.1.6431.1.1.2.2.5.1.1 | Unsigned32 | read-only | current |
| bwSoftwarePatchHistPatchName OBJECT-TYPE The name of the patch against which the operation was applied. | 1.3.6.1.4.1.6431.1.1.2.2.5.1.2 | DisplayString | read-only | current |
| bwSoftwarePatchHistTimeStamp OBJECT-TYPE The time stamp of the patch operation. | 1.3.6.1.4.1.6431.1.1.2.2.5.1.3 | DisplayString | read-only | current |
| bwSoftwarePatchHistNewState OBJECT-TYPE The new state of the patch. | 1.3.6.1.4.1.6431.1.1.2.2.5.1.4 | INTEGER {installed(0), active(1), installedPendingActive(2), activePendingInstalled(3), deleted(4), installedMissingDependencies(5)} | read-only | current |
| bwSoftwarePatchImpactedFileTable OBJECT-TYPE This table contains information about files modified by the patches applied on the system. | 1.3.6.1.4.1.6431.1.1.2.2.6 | not-accessible | current | |
| bwSoftwarePatchImpactedFileEntry OBJECT-TYPE Entry of the patch impacted file table containing information about files modified by patches. | 1.3.6.1.4.1.6431.1.1.2.2.6.1 | not-accessible | current | |
| bwSoftwarePatchImpactedFileIndex OBJECT-TYPE This integer an index of an impacted file/patch name. | 1.3.6.1.4.1.6431.1.1.2.2.6.1.1 | Unsigned32 | read-only | current |
| bwSoftwarePatchImpactedFilePatchName OBJECT-TYPE The name of the patch. | 1.3.6.1.4.1.6431.1.1.2.2.6.1.2 | DisplayString | read-only | current |
| bwSoftwarePatchImpactedFileFileName OBJECT-TYPE The name of an impacted file. | 1.3.6.1.4.1.6431.1.1.2.2.6.1.3 | DisplayString | read-only | current |
| moDeviceModule OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.2.3 | |||
| bwManagedObjectsTable OBJECT-TYPE Table of all sub-managed objects under BroadWorks control | 1.3.6.1.4.1.6431.1.1.2.3.1 | not-accessible | current | |
| bwManagedObjectsEntry OBJECT-TYPE This row contains information on a particular sub-managed object | 1.3.6.1.4.1.6431.1.1.2.3.1.1 | not-accessible | current | |
| bwManagedObjectsIndex OBJECT-TYPE This integer represents the a managed object index in the system | 1.3.6.1.4.1.6431.1.1.2.3.1.1.1 | Unsigned32 | read-only | current |
| bwManagedObjectsName OBJECT-TYPE The name of a managed object controlled by BroadWorks | 1.3.6.1.4.1.6431.1.1.2.3.1.1.2 | DisplayString | read-only | current |
| bwManagedObjectsProtocol OBJECT-TYPE The protocol supported by a managed object controlled by BroadWorks | 1.3.6.1.4.1.6431.1.1.2.3.1.1.3 | DisplayString | read-only | current |
| bwManagedObjectsType OBJECT-TYPE The type of a managed object controlled by BroadWorks | 1.3.6.1.4.1.6431.1.1.2.3.1.1.4 | DisplayString | read-only | current |
| bwManagedObjectsAdminState OBJECT-TYPE The administrative state of a managed object controlled by BroadWorks. 0- Lock, 1- locking, 2- Unlock | 1.3.6.1.4.1.6431.1.1.2.3.1.1.5 | INTEGER {lock(0), locking(1), unlock(2)} | read-write | current |
| bwManagedObjectsOperationalState OBJECT-TYPE The operational state of a managed object controlled by BroadWorks. 0- Enabled, 1- Disabled | 1.3.6.1.4.1.6431.1.1.2.3.1.1.6 | INTEGER {enabled(0), disabled(1)} | read-only | current |
| thresholds OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.3 | |||
| thCounterModule OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.3.1 | |||
| bwCounterThresholdTable OBJECT-TYPE Table of all the thresholds set against counters in the system | 1.3.6.1.4.1.6431.1.1.3.1.1 | not-accessible | current | |
| bwCounterThresholdEntry OBJECT-TYPE This row contains information on a particular counter threshold | 1.3.6.1.4.1.6431.1.1.3.1.1.1 | not-accessible | current | |
| bwCounterThresholdIndex OBJECT-TYPE This integer represents the index of a counter threshold in the system | 1.3.6.1.4.1.6431.1.1.3.1.1.1.1 | Unsigned32 | read-only | current |
| bwCounterThresholdDescription OBJECT-TYPE A description for this threshold. | 1.3.6.1.4.1.6431.1.1.3.1.1.1.2 | DisplayString | read-write | current |
| bwCounterThresholdName OBJECT-TYPE The name of a counter. | 1.3.6.1.4.1.6431.1.1.3.1.1.1.3 | DisplayString | read-write | current |
| bwCounterThresholdInitialValue OBJECT-TYPE The initial counter threshold value | 1.3.6.1.4.1.6431.1.1.3.1.1.1.4 | Integer32 | read-write | current |
| bwCounterThresholdOffsetValue OBJECT-TYPE The offset to be added to the current threshold value once an alarm has been sent | 1.3.6.1.4.1.6431.1.1.3.1.1.1.5 | Integer32 | read-write | current |
| bwCounterThresholdCurrentValue OBJECT-TYPE The threshold value at which the next alarm will be generated | 1.3.6.1.4.1.6431.1.1.3.1.1.1.6 | Gauge32 | read-only | current |
| bwCounterThresholdSeverity OBJECT-TYPE The severity of the alarm to be sent | 1.3.6.1.4.1.6431.1.1.3.1.1.1.7 | INTEGER {informational(0), low(1), medium(2), high(3), critical(4)} | read-write | current |
| bwCounterThresholdControl OBJECT-TYPE This scalar controls the life cycle of the threshold. Setting this counter to create(3) using an unused index creates a row with the specified index. Setting it with an already used index has no effect. Setting this counter to delete(2) removes the entry. | 1.3.6.1.4.1.6431.1.1.3.1.1.1.8 | INTEGER {inactive(0), active(1), delete(2), create(3), invalid(4)} | read-write | current |
| thGaugeModule OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.3.2 | |||
| bwGaugeThresholdTable OBJECT-TYPE Table of all the thresholds set against gauges in the system | 1.3.6.1.4.1.6431.1.1.3.2.1 | not-accessible | current | |
| bwGaugeThresholdEntry OBJECT-TYPE This row contains information on a particular gauge threshold | 1.3.6.1.4.1.6431.1.1.3.2.1.1 | not-accessible | current | |
| bwGaugeThresholdIndex OBJECT-TYPE This integer represents the index of a gauge threshold in the system | 1.3.6.1.4.1.6431.1.1.3.2.1.1.1 | Unsigned32 | read-only | current |
| bwGaugeThresholdDescription OBJECT-TYPE A description for this threshold. | 1.3.6.1.4.1.6431.1.1.3.2.1.1.2 | DisplayString | read-write | current |
| bwGaugeThresholdName OBJECT-TYPE The name of a gauge. | 1.3.6.1.4.1.6431.1.1.3.2.1.1.3 | DisplayString | read-write | current |
| bwGaugeThresholdNotifyLow OBJECT-TYPE The gauge value at which an alarm will be generated when the gauge value reaches or crosses the NotifyHigh level in a rising direction. Subsequent similar crossings of the NotifyHigh level will not generate an alarm until the gauge has reached or crossed the corresponding NotifyLow level. | 1.3.6.1.4.1.6431.1.1.3.2.1.1.4 | Integer32 | read-write | current |
| bwGaugeThresholdNotifyHigh OBJECT-TYPE The gauge value at which an alarm will be generated when the gauge value reaches or crosses the NotifyLow level in a falling direction. Subsequent similar crossings of the NotifyLow level will not generate an alarm until the gauge has reached or crossed the corresponding NotifyHigh level. | 1.3.6.1.4.1.6431.1.1.3.2.1.1.5 | Integer32 | read-write | current |
| bwGaugeThresholdSeverity OBJECT-TYPE The severity of the alarm to be sent | 1.3.6.1.4.1.6431.1.1.3.2.1.1.6 | INTEGER {informational(0), low(1), medium(2), high(3), critical(4)} | read-write | current |
| bwGaugeThresholdControl OBJECT-TYPE This scalar controls the life cycle of the threshold. Setting this gauge to delete(2) removes the entry. | 1.3.6.1.4.1.6431.1.1.3.2.1.1.7 | INTEGER {inactive(0), active(1), delete(2), create(3), invalid(4)} | read-write | current |
| thAlarmModule OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.3.3 | |||
| bwAlarmThresholdTable OBJECT-TYPE Table of all the thresholds set against alarms in the system | 1.3.6.1.4.1.6431.1.1.3.3.1 | not-accessible | current | |
| bwAlarmThresholdEntry OBJECT-TYPE This row contains information on a particular alarm threshold | 1.3.6.1.4.1.6431.1.1.3.3.1.1 | not-accessible | current | |
| bwAlarmThresholdIndex OBJECT-TYPE This integer represents the index of an alarm threshold in the system | 1.3.6.1.4.1.6431.1.1.3.3.1.1.1 | Unsigned32 | read-only | current |
| bwAlarmThresholdName OBJECT-TYPE The name of an alarm or DEFAULT if the threshold applies to all alarms in the system | 1.3.6.1.4.1.6431.1.1.3.3.1.1.2 | DisplayString | read-write | current |
| bwAlarmThresholdMaxNumTrapsPerTimePeriod OBJECT-TYPE The maximum number of traps that the system outputs per sliding time period. If set to 0 (zero), the alarm is suppressed and the system does not output any trap for this alarm filter. | 1.3.6.1.4.1.6431.1.1.3.3.1.1.3 | Integer32 | read-write | current |
| bwAlarmThresholdTimePeriodInSeconds OBJECT-TYPE The time period used for threshold calculation, in seconds. | 1.3.6.1.4.1.6431.1.1.3.3.1.1.4 | Integer32 | read-write | current |
| bwAlarmThresholdProblemTextVarNum1 OBJECT-TYPE To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero). | 1.3.6.1.4.1.6431.1.1.3.3.1.1.5 | Integer32 | read-write | current |
| bwAlarmThresholdProblemTextVarNum2 OBJECT-TYPE To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero). | 1.3.6.1.4.1.6431.1.1.3.3.1.1.6 | Integer32 | read-write | current |
| bwAlarmThresholdProblemTextVarNum3 OBJECT-TYPE To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero). | 1.3.6.1.4.1.6431.1.1.3.3.1.1.7 | Integer32 | read-write | current |
| bwAlarmThresholdProblemTextVarNum4 OBJECT-TYPE To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero). | 1.3.6.1.4.1.6431.1.1.3.3.1.1.8 | Integer32 | read-write | current |
| bwAlarmThresholdProblemTextVarNum5 OBJECT-TYPE To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero). | 1.3.6.1.4.1.6431.1.1.3.3.1.1.9 | Integer32 | read-write | current |
| bwAlarmThresholdMinimumSeverity OBJECT-TYPE This is the minimum alarm severity under which alarms start to be discarded. | 1.3.6.1.4.1.6431.1.1.3.3.1.1.10 | INTEGER {informational(0), low(1), medium(2), high(3), critical(4)} | read-write | current |
| bwAlarmThresholdControl OBJECT-TYPE This scalar controls the life cycle of the threshold. Setting this threshold to create(3) using an unused index creates a row with the specified index. Setting it with an already used index has no effect. Setting this threshold to delete(2) removes the entry. | 1.3.6.1.4.1.6431.1.1.3.3.1.1.11 | INTEGER {inactive(0), active(1), delete(2), create(3), invalid(4)} | read-write | current |
| reservedModule OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.10 | |||
| bwReservedScalar OBJECT-TYPE This is a reserved counter | 1.3.6.1.4.1.6431.1.1.10.1 | INTEGER {notUsed(0)} | read-only | current |
| bwMtcMibConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.20 | |||
| bwMtcMibGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.20.1 | |||
| bwMtcMibCompliancy OBJECT-IDENTITY | 1.3.6.1.4.1.6431.1.1.20.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| bwMoServerGroup OBJECT-GROUP This group defines managed object server attributes. | 1.3.6.1.4.1.6431.1.1.20.1.1 | current |
| bwMoSoftwareVersionsGroup OBJECT-GROUP This group defines the software version attributes for the managed object. | 1.3.6.1.4.1.6431.1.1.20.1.2 | current |
| bwMoDeviceGroup OBJECT-GROUP This group defines the counters used to manage the access or network devices monitored by this managed object. | 1.3.6.1.4.1.6431.1.1.20.1.3 | current |
| bwMoThresholdsGroup OBJECT-GROUP This group defines the threshold control for this managed object. | 1.3.6.1.4.1.6431.1.1.20.1.4 | current |
| bwMoReserveGroup OBJECT-GROUP MIB reserved section. | 1.3.6.1.4.1.6431.1.1.20.1.10 | current |
| bwMoBasicCompliance MODULE-COMPLIANCE BroadWorks Common managed object MIB compliance | 1.3.6.1.4.1.6431.1.1.20.2.1 | current |