BROTHER-MIB

Registered at: 1.3.6.1.4.1.2435
Namespace: brother
Source file: BROTHER-MIB
Digest: sha256:d8c7029adbb98d403dd99af4ae3df02fe8497188a5d4ed2d9775cfb4a7604f1a

Imports

From	Symbols
IPV6-TC	`Ipv6Address`
SNMPv2-CONF	`MODULE-COMPLIANCE, NOTIFICATION-GROUP`
SNMPv2-SMI	`Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso`
SNMPv2-TC	`DateAndTime, DisplayString, TEXTUAL-CONVENTION`

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BROTHER-MIB
IPV6-TC
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

Name	OID	Syntax	Access	Status
brother OBJECT-IDENTITY	1.3.6.1.4.1.2435
nm OBJECT-IDENTITY	1.3.6.1.4.1.2435.2
system OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3
net_peripheral OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9
net_printer OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.1
generalDeviceStatus OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.1.1
status OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.1.1.2
brJamPlace OBJECT-TYPE Location of JAM. 0:No Jam 1:Jam Trays 2:Jam Inside 3:Jam Rear 4:Jam Duplex unit	1.3.6.1.4.1.2435.2.3.9.1.1.2.9	INTEGER (0..4)	read-only	mandatory
tonerlow OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.1.1.2.10
brToner1Low OBJECT-TYPE Black Toner status. 0:Toner Full 1:Toner Low 2:No Toner Cartridge 3:Toner Empty	1.3.6.1.4.1.2435.2.3.9.1.1.2.10.1	INTEGER (0..3)	read-only	mandatory
brToner2Low OBJECT-TYPE Cyan Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty	1.3.6.1.4.1.2435.2.3.9.1.1.2.10.2	INTEGER (0..3)	read-only	mandatory
brToner3Low OBJECT-TYPE Magenta Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty	1.3.6.1.4.1.2435.2.3.9.1.1.2.10.3	INTEGER (0..3)	read-only	mandatory
brToner4Low OBJECT-TYPE Yellow Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty	1.3.6.1.4.1.2435.2.3.9.1.1.2.10.4	INTEGER (0..3)	read-only	mandatory
brieee1284id OBJECT-TYPE IEEE1284 device ID	1.3.6.1.4.1.2435.2.3.9.1.1.7	OCTET STRING	read-only	mandatory
brttt1 OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.1.1.10	INTEGER (0..255)	read-only	mandatory
net_MFP OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2
fax_setup OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.1
autodial OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.1.1
onetouchDial OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.1.1.1
brOneTouchDialCount OBJECT-TYPE Maximum number of One touch dial.	1.3.6.1.4.1.2435.2.3.9.2.1.1.1.1	INTEGER (1..65535)	read-only	mandatory
brOneTouchDialTable OBJECT-TYPE This table represents One touch dial.	1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2		not-accessible	mandatory
brOneTouchDialEntry OBJECT-TYPE A row in the OneTouchDial table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1		not-accessible	mandatory
brOneTouchDialIndex OBJECT-TYPE The One touch dial number.	1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1.1	INTEGER (1..65535)	read-only	mandatory
brOneTouchDialData OBJECT-TYPE The One Touch dial data.	1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1.2	OCTET STRING	read-write	mandatory
speedDial OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.1.1.2
brSpeedDialCount OBJECT-TYPE Maximum number of Speed dial.	1.3.6.1.4.1.2435.2.3.9.2.1.1.2.1	INTEGER (1..65535)	read-only	mandatory
brSpeedDialTable OBJECT-TYPE This table represents Speed dial.	1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2		not-accessible	mandatory
brSpeedDialEntry OBJECT-TYPE A row in the speedDial table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1		not-accessible	mandatory
brSpeedDialIndex OBJECT-TYPE The Speed dial number.	1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1.1	INTEGER (1..65535)	read-only	mandatory
brSpeedDialData OBJECT-TYPE The Speed dial Data.	1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1.2	OCTET STRING	read-write	mandatory
brDialDataAllClear OBJECT-TYPE Clear the all data of Onetouch dial and Speed dial.	1.3.6.1.4.1.2435.2.3.9.2.1.1.3	INTEGER (1..65535)	read-write	mandatory
fax_general OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.1.2
brFaxReceiveMode OBJECT-TYPE Fax Receive Mode 0:Auto 1:Manual 2:FaxTel 3:TAD	1.3.6.1.4.1.2435.2.3.9.2.1.2.1	INTEGER	read-write	mandatory
brRingDelayCount OBJECT-TYPE Ring Delay Count	1.3.6.1.4.1.2435.2.3.9.2.1.2.2	INTEGER (0..4)	read-write	mandatory
brOwnFaxNumber OBJECT-TYPE Own Fax Number	1.3.6.1.4.1.2435.2.3.9.2.1.2.3	OCTET STRING	read-write	mandatory
scanner_setup OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.11
scanToInfo OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.11.1
brRegisterKeyInfo OBJECT-TYPE Add the ScanTo information. If device receives GET request, device should reply fix value TRUE(writable), FALSE(not writable) to the client.	1.3.6.1.4.1.2435.2.3.9.2.11.1.1	OCTET STRING	read-write	mandatory
brUnRegisterKeyInfo OBJECT-TYPE Remove the ScanTo information. If device receives GET request, device should reply fix value TRUE (writable), FALSE (not writable) to the client.	1.3.6.1.4.1.2435.2.3.9.2.11.1.2	OCTET STRING	read-write	mandatory
brNetSKeyReceiverAddress OBJECT-TYPE IP Address or the name of the S-Key Receiver.	1.3.6.1.4.1.2435.2.3.9.2.11.1.5	OCTET STRING (SIZE(0..63))	read-write	mandatory
mfpCapability OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101
mcGeneral OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101.1
mcgRemoteSetup OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101.1.11
brNetRemoteSetUpSupported OBJECT-TYPE 0 indicates the Net Remote Setup function is not supported. 1 indicates the Net Remote Setup function is implemented by the firmware	1.3.6.1.4.1.2435.2.3.9.2.101.1.11.1	INTEGER (0..1)	read-only	mandatory
brNetRemoteSetUpEnable OBJECT-TYPE 0 indicates the Net Remote Setup is not enabled. 1 indicates that the Net Remote Setup is enabled. Writing a non-zero value will enable the Net Remote Setup if it is supported by the firmware.	1.3.6.1.4.1.2435.2.3.9.2.101.1.11.2	INTEGER (0..1)	read-write	mandatory
brNetRemoteSetUpFileFormat OBJECT-TYPE It is a file format of the Net Remote Setup function.	1.3.6.1.4.1.2435.2.3.9.2.101.1.11.3	INTEGER {rms(1), rmd(2), rmsrmd(3)}	read-only	mandatory
mcFax OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101.2
mcfGeneral OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101.2.1
brFaxSupported OBJECT-TYPE 0 indicates the Fax function is not supported. 1 indicates the Fax function is implemented by the firmware	1.3.6.1.4.1.2435.2.3.9.2.101.2.1.1	INTEGER (0..1)	read-only	mandatory
brIFaxSupported OBJECT-TYPE 0 indicates the IFax function is not supported. 1 indicates the IFax function is implemented by the firmware	1.3.6.1.4.1.2435.2.3.9.2.101.2.1.3	INTEGER (0..1)	read-only	mandatory
mcfNetFaxShare OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101.2.11
brNetFaxShareSupported OBJECT-TYPE 0 indicates the Net Fax Share is not supported. 1 indicates the Net Fax Share is implemented by the firmware	1.3.6.1.4.1.2435.2.3.9.2.101.2.11.1	INTEGER (0..1)	read-only	mandatory
brNetFaxShareEnable OBJECT-TYPE 0 indicates the Net Fax Share is not enabled. 1 indicates that the Net Fax Share is enabled. Writing a non-zero value will enable the Net Fax Share if it is supported by the firmware.	1.3.6.1.4.1.2435.2.3.9.2.101.2.11.2	INTEGER (0..1)	read-write	mandatory
mcfNetPcFaxRx OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101.2.12
brNetPcFaxRxSupported OBJECT-TYPE 0 indicates the Net PC Fax Rx is not supported. 1 indicates the Net PC Fax Rx is implemented by the firmware	1.3.6.1.4.1.2435.2.3.9.2.101.2.12.1	INTEGER (0..1)	read-only	mandatory
brNetPcFaxRxEnable OBJECT-TYPE 0 indicates the Net PC Fax Rx is not enabled. 1 indicates that the Net PC Fax Rx is enabled. Writing a non-zero value will enable the Net PC Fax Rx if it is supported by the firmware.	1.3.6.1.4.1.2435.2.3.9.2.101.2.12.2	INTEGER (0..1)	read-write	mandatory
brNetRegisterPcFaxInfo OBJECT-TYPE Add the PcFax information. If device receives GET request, device should reply fix value TRUE(writable), FALSE(not writable) to the client.	1.3.6.1.4.1.2435.2.3.9.2.101.2.12.3	OCTET STRING	read-write	mandatory
mcfFaxInfomation OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101.2.101
brPhoneNumberLastFax OBJECT-TYPE Phone Number of Last Fax	1.3.6.1.4.1.2435.2.3.9.2.101.2.101.1	OCTET STRING (SIZE(0..20))	read-only	mandatory
brPagesSentLastFax OBJECT-TYPE Pages Sent in Last Fax	1.3.6.1.4.1.2435.2.3.9.2.101.2.101.2	Counter	read-only	mandatory
brTimestampLastFax OBJECT-TYPE Timestamp of Last Fax	1.3.6.1.4.1.2435.2.3.9.2.101.2.101.3	DateAndTime	read-only	mandatory
brFaxHeaderInfo OBJECT-TYPE Fax Header Infomation	1.3.6.1.4.1.2435.2.3.9.2.101.2.101.4	DisplayString (SIZE(0..50))	read-write	mandatory
mcScanner OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101.3
mcsNetScanner OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101.3.11
brNetScannerSupported OBJECT-TYPE 0 indicates the Net Scanner is not supported. 1 indicates the Net Scanner is implemented by the firmware	1.3.6.1.4.1.2435.2.3.9.2.101.3.11.1	INTEGER (0..1)	read-only	mandatory
brNetScannerEnable OBJECT-TYPE 0 indicates the Net Scanner is not enabled. 1 indicates that the Net Scanner is enabled. Writing a non-zero value will enable the Net Scanner if it is supported by the firmware.	1.3.6.1.4.1.2435.2.3.9.2.101.3.11.2	INTEGER (0..1)	read-write	mandatory
mcsNetSKy OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.101.3.12
brNetSKeySupported OBJECT-TYPE 0 indicates the Net S-Key is not supported. 1 indicates the Net S-Key is implemented by the firmware	1.3.6.1.4.1.2435.2.3.9.2.101.3.12.1	INTEGER (0..1)	read-only	mandatory
brNetSKeyEnable OBJECT-TYPE 0 indicates the Net S-Key is not enabled. 1 indicates that the Net S-Key is enabled. Writing a non-zero value will enable the Net S-Key if it is supported by the firmware.	1.3.6.1.4.1.2435.2.3.9.2.101.3.12.2	INTEGER (0..1)	read-write	mandatory
mfpgeneral_setup OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.2.111
brServiceMode OBJECT-TYPE Service Mode	1.3.6.1.4.1.2435.2.3.9.2.111.1	OCTET STRING	read-write	mandatory
brLockMode OBJECT-TYPE Lock Mode 0:normal 1:Customer 2:Lock	1.3.6.1.4.1.2435.2.3.9.2.111.2	INTEGER (0..2)	read-write	mandatory
brActivityReportSetting OBJECT-TYPE Activity Report Setting 0:off 1:every 1hour 3:every 3hour 6:every 6hour 12:every 12hour 24:every 24hour 48:every 2day 96:every 4day 240:every Sunday 241:every Monday 242:every Tueseday 243:every Wednesday 244:every Thurseday 245:every Friday 246:every Saturday 255:interval 50FAX	1.3.6.1.4.1.2435.2.3.9.2.111.3	INTEGER	read-write	mandatory
netPML OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4
netPMLmgmt OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2
device OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1
destination_subsystem1 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1
sleep OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.1
brpowerstime OBJECT-TYPE PowerSave Timeout value. 1 to 2147483647 (sec)	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.1.1	INTEGER (1..2147483647)	read-write	mandatory
autoc OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.2
brautocont OBJECT-TYPE Auto Continue. 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.2.7	INTEGER (0..2)	read-write	mandatory
simm OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4
specification OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1
simmkind0 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1
brsimmtype0 OBJECT-TYPE SIMM type on slot0. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1.4	INTEGER	read-only	mandatory
brsimmsize0 OBJECT-TYPE SIMM size on slot0	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1.5	INTEGER	read-only	mandatory
simmkind1 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2
brsimmtype1 OBJECT-TYPE SIMM type on slot1. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2.4	INTEGER	read-only	mandatory
brsimmsize1 OBJECT-TYPE SIMM size on slot1	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2.5	INTEGER	read-only	mandatory
simmkind2 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3
brsimmtype2 OBJECT-TYPE SIMM type on slot2. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3.4	INTEGER	read-only	mandatory
brsimmsize2 OBJECT-TYPE SIMM size on slot2.	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3.5	INTEGER	read-only	mandatory
simmkind3 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4
brsimmtype3 OBJECT-TYPE SIMM type on slot3. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4.4	INTEGER	read-only	mandatory
brsimmsize3 OBJECT-TYPE SIMM type on slot3.	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4.5	INTEGER	read-only	mandatory
bio1_explanation OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3
determined OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3.1
brTBD1 OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3.1.4	INTEGER (1..15)	read-write	mandatory
destination_subsystem2 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.2
printerjob OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1
jobend OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1
brtimeout OBJECT-TYPE Job Timeout. 1 to 2147483647(sec)	1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1.1	INTEGER (1..2147483647)	read-write	mandatory
brTBD2 OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1.5	INTEGER (1..15)	read-write	mandatory
destination_subsystem3 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.3
prt_setup OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3
prt_condition OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1
brpersonality OBJECT-TYPE Printer Emulation setting. 1:PCL 2:HPGL 4:PS 5:AUTO 6:IBM 7:EPSON 8:HBP	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.1	INTEGER {pcl(1), hpgl(2), ps(4), auto(5), ibm(6), epson(7), hbp(8)}	read-write	mandatory
brorientation OBJECT-TYPE Default Paper Orientation. 1:portrait 2:landscape	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.2	INTEGER (0..4)	read-write	mandatory
brcopies OBJECT-TYPE Default Copy Pages. 1-999 pages	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.4	INTEGER (1..999)	read-write	mandatory
brTBD3 OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.6	INTEGER (1..15)	read-write	mandatory
brresolution OBJECT-TYPE Default Resolution. 300, 600 or 1200dpi	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.8	INTEGER (0..1200)	read-write	mandatory
brpageprotect OBJECT-TYPE Page Protect mode 1:Off 3:Auto 4:Letter 5:Legal 6:A4	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.10	INTEGER (0..6)	read-write	mandatory
brlines OBJECT-TYPE lines per page. 5-128	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.11	INTEGER (5..128)	read-write	mandatory
brpaper OBJECT-TYPE Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West 923:A5L 924:B6JIS 925:16K195x270 926:16K184x260 927:197x273 999:Other 1000:No Casette 1001:Auto	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.13	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), a5l(923), b6JIS(924), prc16k195x270(925), prc16k184x260(926), prc16k197x273(927), auto(1001)}	read-write	mandatory
brpapertype OBJECT-TYPE Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.22	INTEGER	read-write	mandatory
brpapertype2 OBJECT-TYPE Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 2nd Tray PaperType	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.23	INTEGER	read-write	mandatory
brpapertypeMP OBJECT-TYPE Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType	1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.26	INTEGER	read-write	mandatory
destination_subsystem4 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4
print_engine OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1
prt_density OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.1
brdensity OBJECT-TYPE Print Density. -15..15	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.1.5	INTEGER (-15..15)	read-write	mandatory
status_prt_eng OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.2
tray OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3
manual OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.1
brmanualfeed OBJECT-TYPE Manualfeed mode. 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.1.4	INTEGER (0..2)	read-write	mandatory
traysize OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3
mp OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.1
brmpsize OBJECT-TYPE MP Tray paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.1.1	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)}	read-write	mandatory
cassette OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.2
brtray1size OBJECT-TYPE Tray1 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.2.1	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)}	read-write	mandatory
cassette2 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.3
brtray2size OBJECT-TYPE Tray2 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.3.1	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)}	read-write	mandatory
cassette3 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.4
brtray3size OBJECT-TYPE Tray3 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.4.1	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)}	read-write	mandatory
cassette4 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.5
brtray4size OBJECT-TYPE Tray4 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.5.1	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)}	read-write	mandatory
economy OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6
brret OBJECT-TYPE HRC mode. 1:Off 2:Bright 3:Medium 4:Dark	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6.5	INTEGER (0..4)	read-write	mandatory
breconomode OBJECT-TYPE Toner Save mode. 100:Off 0:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6.7	INTEGER (0..100)	read-write	mandatory
brorg OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5
printersetup OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1
general OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1
brPrtGeneralEmulationTimeout OBJECT-TYPE Emulation Timeout. 1- 99(sec)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.1	INTEGER (1..99)	read-write	mandatory
brPrtGeneralFeeder OBJECT-TYPE Default Feeder mode. 0:Auto 1:MP Tray 2:Tray1 3:Tray2 4:Tray3 5:Tray4	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.2	INTEGER (0..5)	read-write	mandatory
brPrtGeneralPowerSave OBJECT-TYPE Power Save mode. 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.3	INTEGER (0..2)	read-write	mandatory
brPrtGeneralBuzzer OBJECT-TYPE Buzzer. 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.4	INTEGER (0..2)	read-write	mandatory
brPrtGeneralColor OBJECT-TYPE Default Color mode 1:Monochrome 2:Color 3:Auto	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.5	INTEGER (0..3)	read-write	mandatory
brPrtGeneralDuplex OBJECT-TYPE Duplex mode 1:Off(Simplex) 2:On(Duplex)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.6	INTEGER (0..2)	read-write	mandatory
brPrtGeneralBinding OBJECT-TYPE Binding type 3:Short Edge 2:Long Edge	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.7	INTEGER (0..3)	read-write	mandatory
advanced OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2
brPrtAdvancedPriority OBJECT-TYPE FX/XL Priority. 1:IBM XL 2:EPSON FX	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.1	INTEGER (0..2)	read-write	mandatory
brPrtAdvancedUseMPTrayFirst OBJECT-TYPE MP Tray First 1:No 2:Yes	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.2	INTEGER (0..2)	read-write	mandatory
brPrtAdvancedMPTrayFeed OBJECT-TYPE MP Tray feed mode. 1:Single 2:Continuous	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.3	INTEGER (0..2)	read-write	mandatory
brPrtAdvancedXOffset OBJECT-TYPE X Offset. -500 to +500 pixel(600dpi)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.4	INTEGER (-500..500)	read-write	mandatory
brPrtAdvancedYOffset OBJECT-TYPE Y Offset. -500 to +500 pixel(600dpi)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.5	INTEGER (-500..500)	read-write	mandatory
brPrtAdvancedImageCompression OBJECT-TYPE Image Compression mode. 0:Auto 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.6	INTEGER (0..2)	read-write	mandatory
autoff OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7
brPrtAdvancedAutoFormFeed OBJECT-TYPE Auto Formfeed mode. 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7.1	INTEGER (0..2)	read-write	mandatory
brPrtAdvancedAutoTimeout OBJECT-TYPE Auto Formfeed timeout. 1-99 (sec)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7.2	INTEGER (1..99)	read-write	mandatory
brPrtAdvancedFFSuppress OBJECT-TYPE FF Suppress mode. 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.8	INTEGER (0..2)	read-write	mandatory
brPrtAdvancedTonerLowPrint OBJECT-TYPE Print mode on Toner Low. 1:Stop 2:Continue	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.9	INTEGER (0..2)	read-write	mandatory
brPrtAdvancedPrintDensity OBJECT-TYPE Print Density. 1-15	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.10	INTEGER (0..15)	read-write	mandatory
brPrtAdvancedInputBuffer OBJECT-TYPE Input Buffer size. 1-15 blocks	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.11	INTEGER (1..15)	read-write	mandatory
brPrtAdvancedLanguage OBJECT-TYPE 1:ENGLISH 2:DANISH 3:DUTCH 4:FINNISH 5:FRENCH 6:GERMAN 7:ITALIAN 8:NORWEGIAN 9:PORTUGUESE 10:SWEDISH 11:SPANISH 12:TURKISH 13:POLISH 14:JAPANESE 15:RUSSIAN 16:CZECH 17:HUNGARIAN 18:ROMANIAN 19:BULGARIAN 20:SLOVAKIAN 21:CHINESE 22:BRAZIL	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.12	INTEGER {english(1), danish(2), dutch(3), finish(4), french(5), german(6), italian(7), norwegian(8), portuguse(9), swedish(10), spanish(11), turkish(12), polish(13), japanese(14), russian(15), czech(16), hungarian(17), romanian(18), bulgarian(19), slovakian(20), chinese(21), brazil(22)}	read-write	mandatory
brSecurePrintRAMSizeMax OBJECT-TYPE The Max of Secure print RAM Size	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.13	INTEGER (0..2147483647)	read-only	mandatory
brSecurePrintRAMSize OBJECT-TYPE Secure print RAM Size	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.14	INTEGER (0..2147483647)	read-write	mandatory
brPrtAdvancedJamRecovery OBJECT-TYPE Jam recovery setting	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.15	INTEGER {off(1), on(2)}	read-write	mandatory
brPrtAdvancedSleepIndication OBJECT-TYPE By enabling the Dimmed option, the status LED is dimmed while the printer is in sleep mode.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.16	INTEGER {off(1), dimmed(2)}	read-write	mandatory
brPrtAdvancedDestination OBJECT-TYPE Destination	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.17	INTEGER {standardOutputTray(1), oct(2), octStack(3)}	read-write	mandatory
brPrtAdvancedLowerLCD OBJECT-TYPE Lower LCD	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.18	INTEGER {nonePage(1), counter(2), jobName(3)}	read-write	mandatory
brPrtAdvancedAutoOnline OBJECT-TYPE Auto Online	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.19	INTEGER {off(1), on(2)}	read-write	mandatory
brPrtAdvancedButtonRepeat OBJECT-TYPE Button Repeat. 0.1-2.0	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.20	INTEGER (1..20)	read-write	mandatory
brPrtAdvancedMessageScroll OBJECT-TYPE Message Scroll. 1-10	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.21	INTEGER (1..20)	read-write	mandatory
buzzer OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22
brPrtAdvancedErrorBuzzer OBJECT-TYPE Error Buzzer	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.1	INTEGER {off(1), normal(2), special(3)}	read-write	mandatory
brPrtAdvancedPanelBuzzer OBJECT-TYPE Panel Buzzer	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.2	INTEGER {off(1), on(2)}	read-write	mandatory
brPrtAdvancedBuzzerVolume OBJECT-TYPE Buzzer Volume	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.3	INTEGER {high(1), low(2)}	read-write	mandatory
brPrtAdvancedLCDDensity OBJECT-TYPE LCDDensity	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.23	INTEGER	read-write	mandatory
smallPaperSize OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51
brSmallPaperSizeMP OBJECT-TYPE MP Tray Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.1	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), noCasette(1000)}	read-write	mandatory
brSmallPaperSize1 OBJECT-TYPE Tray1 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.2	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), noCasette(1000)}	read-write	mandatory
brSmallPaperSize2 OBJECT-TYPE Tray2 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.3	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), noCasette(1000)}	read-write	mandatory
brSmallPaperSize3 OBJECT-TYPE Tray3 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.4	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), noCasette(1000)}	read-write	mandatory
brSmallPaperSize4 OBJECT-TYPE Tray4 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.5	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), noCasette(1000)}	read-write	mandatory
trayPriority OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52
brPrtAdvancedTrayPriority OBJECT-TYPE The value of brTrayPriorityIndex corresponding to the default setting.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.1	INTEGER	read-write	mandatory
brTrayPriorityCount OBJECT-TYPE Maximum number of TrayPriority INDEX.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.2	INTEGER	read-only	mandatory
brTrayPriorityTable OBJECT-TYPE This table represents TrayPriority setting.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3		not-accessible	mandatory
brTrayPriorityEntry OBJECT-TYPE A row in the TrayPriority table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1		not-accessible	mandatory
brTrayPriorityIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1.1	INTEGER (1..255)	read-only	mandatory
brTrayPriorityMember OBJECT-TYPE The TrayPriority member data. Format: valulen(1byte), value(valulen byte)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1.2	OCTET STRING	read-only	mandatory
carbonCopy OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53
brCarbonCopyMode OBJECT-TYPE Carbon Copy mode setting.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.1	INTEGER {off(1), on(2), auto(3), parallel(4)}	read-write	mandatory
brCarbonCopies OBJECT-TYPE The copies setting of Carbon Copy function.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.2	INTEGER	read-write	mandatory
brCarbonCopyTable OBJECT-TYPE This table represents CarbonCopy setting.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10		not-accessible	mandatory
brCarbonCopyEntry OBJECT-TYPE A row in the CarbonCopy table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1		not-accessible	mandatory
brCarbonCopyIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.1	INTEGER (1..65535)	read-only	mandatory
brCarbonCopyTray OBJECT-TYPE Copy Tray setting.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.2	INTEGER {tray1(1), tray2(2), tray3(3), tray4(4), mpTray(10), auto(11)}	read-write	mandatory
brCarbonCopyMacro OBJECT-TYPE Carbon Copy Macro Setting	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.3	INTEGER {off(1), on(2)}	read-write	mandatory
brCarbonCopyMacroID OBJECT-TYPE Carbon Copy Macro ID Setting	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.4	INTEGER	read-write	mandatory
mediaFix OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54
brMediaFixTray1 OBJECT-TYPE Media Fix setting for tray1.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.1	INTEGER {off(1), regular(2), thick(3), thicker(4), transparency(5), thin(6), bond(7), envelopes(8), envThick(9), envThin(10), recycled(11)}	read-write	mandatory
brMediaFixTray2 OBJECT-TYPE Media Fix setting for tray2.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.2	INTEGER {off(1), regular(2), thick(3), thicker(4), transparency(5), thin(6), bond(7), envelopes(8), envThick(9), envThin(10), recycled(11)}	read-write	mandatory
brMediaFixTray3 OBJECT-TYPE Media Fix setting for tray3.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.3	INTEGER {off(1), regular(2), thick(3), thicker(4), transparency(5), thin(6), bond(7), envelopes(8), envThick(9), envThin(10), recycled(11)}	read-write	mandatory
brMediaFixTray4 OBJECT-TYPE Media Fix setting for tray4.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.4	INTEGER {off(1), regular(2), thick(3), thicker(4), transparency(5), thin(6), bond(7), envelopes(8), envThick(9), envThin(10), recycled(11)}	read-write	mandatory
brMediaFixMP OBJECT-TYPE Media Fix setting for MPtray.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.10	INTEGER {off(1), regular(2), thick(3), thicker(4), transparency(5), thin(6), bond(7), envelopes(8), envThick(9), envThin(10), recycled(11)}	read-write	mandatory
directprint OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60
brDirectPrintPaperSize OBJECT-TYPE Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West 923:A5L 924:B6JIS 925:16K195x270 926:16k184x260 927:16k197x273	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.1	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), a5l(923), b6jis(924), prc16k195x270(925), prc16k184x260(926), prc16k197x273(927)}	read-write	mandatory
brDirectPrintMediaType OBJECT-TYPE Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.2	INTEGER	read-write	mandatory
brDirectPrintMultipulPage OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.3	INTEGER	read-write	mandatory
brDirectPrintOrientation OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.4	INTEGER	read-write	mandatory
brDirectPrintCollate OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.5	INTEGER	read-write	mandatory
brDirectPrintOutputColor OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.6	INTEGER	read-write	mandatory
brDirectPrintPrintQuality OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.7	INTEGER	read-write	mandatory
brDirectPrintPdfOption OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.8	INTEGER	read-write	mandatory
brDirectPrintSetting OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.9	INTEGER	read-only	mandatory
brDirectPrintPdfThumbnailType OBJECT-TYPE PDF Thumbnail Type 1:AlternativeImage 2:ReductionImage	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.10	INTEGER {alternativeImage(1), reductionImage(2)}	read-write	mandatory
pictbridge OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61
brPictBridgePaperSize OBJECT-TYPE Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.1	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)}	read-write	mandatory
brPictBridgeOrientation OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.2	INTEGER	read-write	mandatory
brPictBridgeDateTime OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.3	INTEGER	read-write	mandatory
brPictBridgeFileName OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.4	INTEGER	read-write	mandatory
brPictBridgePrintQuality OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.5	INTEGER	read-write	mandatory
brPictBridgePrintSetting OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.6	INTEGER	read-only	mandatory
colorcorrection OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62
brColorCalibration OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.1	INTEGER	read-write	mandatory
brColorCalibrationReset OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.2	INTEGER	read-write	mandatory
brAutoRegistRegistrate OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.3	INTEGER	read-write	mandatory
brAutoRegistSetInterval OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.4	INTEGER	read-write	mandatory
brRegistrationPrintChart OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.5	INTEGER	read-write	mandatory
brRegistrationXMagentaLeft OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.6	INTEGER	read-write	mandatory
brRegistrationXMagentaRight OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.7	INTEGER	read-write	mandatory
brRegistrationXCyanLeft OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.8	INTEGER	read-write	mandatory
brRegistrationXCyanRight OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.9	INTEGER	read-write	mandatory
brRegistrationXYellowLeft OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.10	INTEGER	read-write	mandatory
brRegistrationXYellowRight OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.11	INTEGER	read-write	mandatory
brRegistrationYMagenta OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.12	INTEGER	read-write	mandatory
brRegistrationYCyan OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.13	INTEGER	read-write	mandatory
brRegistrationYYellow OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.14	INTEGER	read-write	mandatory
funclock OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63
brFuncLockSettingInit OBJECT-TYPE Init Function Lock Setting.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.1	INTEGER	read-write	mandatory
brFuncLockAdminPassword OBJECT-TYPE Get or Set the administrator password of Function Lock.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.2	DisplayString	read-write	mandatory
brFuncLock OBJECT-TYPE Get or Set the status of Function Lock.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.3	INTEGER (1..2)	read-write	mandatory
brFuncLockPublicFuncCount OBJECT-TYPE Return the number of functions to be locked on the public mode.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.4	INTEGER (0..2147483647)	read-only	mandatory
brFuncLockPublicTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5		not-accessible	mandatory
brFuncLockPublicEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1		not-accessible	mandatory
brFuncLockPublicFuncIndex OBJECT-TYPE Return the index value of functions to be locked on the public mode.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.1	INTEGER (1..2147483647)	read-only	mandatory
brFuncLockPublicFuncMember OBJECT-TYPE Return the member of functions to be locked on the public mode.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.2	INTEGER {copycolor(1), copybr(2), faxtx(3), faxrx(4), scan(5), print(6), pcc(7)}	read-only	mandatory
brFuncLockPublicFuncSupported OBJECT-TYPE Return the status of availableness of functions to be locked on the public mode.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.3	INTEGER (0..1)	read-only	mandatory
brFuncLockPublicFuncEnable OBJECT-TYPE Get of Set the status of functions on the public mode.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.4	INTEGER (0..1)	read-write	mandatory
brFuncLockUserCount OBJECT-TYPE Return the number of users to be locked on function lock.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.6	INTEGER (0..2147483647)	read-only	mandatory
brFuncLockUserTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7		not-accessible	mandatory
brFuncLockUserEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1		not-accessible	mandatory
brFuncLockUserIndex OBJECT-TYPE Return the index value of users to be locked on function lock.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.1	INTEGER (1..2147483647)	read-only	mandatory
brFuncLockUserName OBJECT-TYPE Get or Set the user name of function lock.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.2	DisplayString	read-write	mandatory
brFuncLockUserPassword OBJECT-TYPE Get or Set the user password of function lock.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.3	DisplayString	read-write	mandatory
brFuncLockUserFuncCount OBJECT-TYPE Return the number of users to be locked on the function lock.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.8	INTEGER (0..2147483647)	read-only	mandatory
brFuncLockUserFuncTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9		not-accessible	mandatory
brFuncLockUserFuncEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1		not-accessible	mandatory
brFuncLockUserFuncIndex OBJECT-TYPE Return the index value of users to be locked on user mode.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.1	INTEGER (1..2147483647)	read-only	mandatory
brFuncLockUserFuncMember OBJECT-TYPE Return the function numbers to be locked on user mode.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.2	INTEGER {copycolor(1), copybr(2), faxtx(3), faxrx(4), scan(5), print(6), pcc(7)}	read-only	mandatory
brFuncLockUserFuncSupported OBJECT-TYPE Return the availableness of function to be locked on user mode.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.3	INTEGER (0..1)	read-only	mandatory
brFuncLockUserFuncEnable OBJECT-TYPE Get or Set the lock status on the user mode.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.4	INTEGER (0..1)	read-write	mandatory
brFuncLockSetting OBJECT-TYPE Write the all information of function lock.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.10	INTEGER	read-write	mandatory
brFuncLockUserPrintPageCounterReset OBJECT-TYPE Reset all user's counter of Color/Mono print page.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.20	INTEGER (0)	read-write	mandatory
brFuncLockPublicPrintLimitEnable OBJECT-TYPE This MIB represents Enable/Disable of print limit setting for public user.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.21	INTEGER (0..1)	read-write	mandatory
brFuncLockPublicPrintPageMax OBJECT-TYPE The Maximum of print limited for public user.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.22	INTEGER (1..999999)	read-write	mandatory
brFuncLockPublicPrintPageCountMono OBJECT-TYPE The counter of monochrome print page.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.23	INTEGER (0..999999)	read-only	mandatory
brFuncLockPublicPrintPageCountColor OBJECT-TYPE The counter of color print page for public user.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.24	INTEGER (0..999999)	read-only	mandatory
brFuncLockUserPrintPageTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25		not-accessible	mandatory
brFuncLockUserPrintPageEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1		not-accessible	mandatory
brFuncLockUserPrintPageIndex OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.1	INTEGER (1..2147483647)	read-only	mandatory
brFuncLockUserPrintPageLimitEnable OBJECT-TYPE The Maximum of Print Page setting for user.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.2	INTEGER (0..1)	read-write	mandatory
brFuncLockUserPrintPageCountMono OBJECT-TYPE The Counter of Monochrome Print Page for user.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.3	INTEGER (0..999999)	read-only	mandatory
brFuncLockUserPrintPageCountColor OBJECT-TYPE The counter of color print page for user.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.4	INTEGER (0..999999)	read-only	mandatory
brFuncLockUserPrintPageMax OBJECT-TYPE The Maximum of print limited for user.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.5	INTEGER (1..999999)	read-write	mandatory
brFuncLockUserPrintPageCountMonoLast OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.6	INTEGER (0..999999)	read-only	mandatory
brFuncLockUserPrintPageCountColorLast OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.7	INTEGER (0..999999)	read-only	mandatory
brFuncLockPcLoginNameAuthEnable OBJECT-TYPE This MIB represents Enable/Disable of PC Login Authentication setting.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.26	INTEGER (0..1)	read-write	mandatory
brFuncLockPcLoginNameAuthCount OBJECT-TYPE The number of PC Login Name.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.27	INTEGER	read-only	mandatory
brFuncLockPcLoginNameTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28		not-accessible	mandatory
brFuncLockPcLoginNameEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1		not-accessible	mandatory
brFuncLockPcLoginNameAuthIndex OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.1	INTEGER (1..50)	read-only	mandatory
brFuncLockPcLoginName OBJECT-TYPE The PC Login Name.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.2	OCTET STRING	read-write	mandatory
brFuncLockPcLoginNameAuthID OBJECT-TYPE PC Login ID for PC Login name.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.3	INTEGER (1..25)	read-write	mandatory
brFuncLockPublicPrintPageCountMonoLast OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.29	INTEGER (0..999999)	read-only	mandatory
brFuncLockPublicPrintPageCountColorLast OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.30	INTEGER (0..999999)	read-only	mandatory
autocountreset OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31
brFuncLockAutoCountResetFrequency OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.1	INTEGER (1..4)	read-write	mandatory
brFuncLockAutoCountResetTime OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.2	OCTET STRING (SIZE(2))	read-write	mandatory
brFuncLockAutoCountResetWeek OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.3	INTEGER (1..7)	read-write	mandatory
brFuncLockAutoCountResetDate OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.4	INTEGER (1..31)	read-write	mandatory
mail OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3
brPrtMailbox OBJECT-TYPE Mailbox Installed of not	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.1	INTEGER (0..2)	read-write	mandatory
brPrtMailboxProtectTable OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2		not-accessible	mandatory
brPrtMailboxProtectEntry OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1		not-accessible	mandatory
brPrtMailboxProtectIndex OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1.1	INTEGER (1..65535)	read-write	mandatory
brPrtMailboxProtect OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1.2	INTEGER (0..2)	read-write	mandatory
brPrtAvoidMailboxFullTable OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3		not-accessible	mandatory
brPrtAvoidMailboxFullEntry OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1		not-accessible	mandatory
brPrtAvoidMailboxFullIndex OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1.1	INTEGER (1..65535)	read-write	mandatory
brPrtAvoidMailboxFull OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1.2	INTEGER (0..2)	read-write	mandatory
brPrtMailboxOutbin OBJECT-TYPE Outbin	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.4	INTEGER (0..110)	read-write	mandatory
brPrtMailboxProtectGroup OBJECT-TYPE Mailbox Protect	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.5	INTEGER (0..99)	read-write	mandatory
brPrtAvoidMailboxFullGroup OBJECT-TYPE Avoid Mailbox Full	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.6	INTEGER (0..1)	read-write	mandatory
finisher OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.4
brPrtFinisher OBJECT-TYPE Finisher type 0:no finisher 1:FS5050 2:FS5100	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.4.1	INTEGER (0..255)	read-only	mandatory
catch_tray OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.5
brPrtCatchTray OBJECT-TYPE catch tray Installed or not	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.5.1	INTEGER (0..2)	read-only	mandatory
pagesetup OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2
pcl OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1
margin_p OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1
brPagePCLLeftMargin OBJECT-TYPE PCL LeftMargin 1270N :0-145 2400Ce :0-176	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.1	INTEGER (0..255)	read-write	mandatory
brPagePCLRightMargin OBJECT-TYPE PCL RightMargin 1270N :10-155 2400Ce :10-186	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.2	INTEGER (0..255)	read-write	mandatory
brPagePCLTopMargin OBJECT-TYPE PCL TopMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.3	INTEGER (0..200)	read-write	mandatory
brPagePCLBottomMargin OBJECT-TYPE PCL BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.4	INTEGER (0..200)	read-write	mandatory
brPagePCLLines OBJECT-TYPE PCL Form Line 5-128	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.5	INTEGER (5..128)	read-write	mandatory
auto_p OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2
brPagePCLAutoLF OBJECT-TYPE PCL AutoLF 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.1	INTEGER (0..2)	read-write	mandatory
brPagePCLAutoCR OBJECT-TYPE PCL AutoCR 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.2	INTEGER (0..2)	read-write	mandatory
brPagePCLAutoWrap OBJECT-TYPE PCL AutoWrap 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.3	INTEGER (0..2)	read-write	mandatory
brPagePCLAutoSkip OBJECT-TYPE PCL AutoSkip 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.4	INTEGER (0..2)	read-write	mandatory
ps OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2
brPagePSPrintPSError OBJECT-TYPE PrintPSError 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.1	INTEGER {off(1), on(2)}	read-write	mandatory
brPagePSKeepPCLFonts OBJECT-TYPE KeepPCLFonts 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.2	INTEGER {off(1), on(2)}	read-write	mandatory
brPagePSCAPTsetting OBJECT-TYPE PS CAPT setting 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.3	INTEGER {off(1), on(2)}	read-write	mandatory
gl OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3
pen1 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1
brPageGLPen1Size OBJECT-TYPE GL PenSize 1-16	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1.1	INTEGER (0..16)	read-write	mandatory
brPageGLPen1GrayLevel OBJECT-TYPE GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100%	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1.2	INTEGER (0..5)	read-write	mandatory
pen2 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2
brPageGLPen2Size OBJECT-TYPE GL PenSize 1-16	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2.1	INTEGER (0..16)	read-write	mandatory
brPageGLPen2GrayLevel OBJECT-TYPE GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100%	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2.2	INTEGER (0..5)	read-write	mandatory
pen3 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3
brPageGLPen3Size OBJECT-TYPE GL PenSize 1-16	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3.1	INTEGER (0..16)	read-write	mandatory
brPageGLPen3GrayLevel OBJECT-TYPE GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100%	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3.2	INTEGER (0..5)	read-write	mandatory
pen4 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4
brPageGLPen4Size OBJECT-TYPE GL PenSize 1-16	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4.1	INTEGER (0..16)	read-write	mandatory
brPageGLPen4GrayLevel OBJECT-TYPE GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100%	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4.2	INTEGER (0..5)	read-write	mandatory
pen5 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5
brPageGLPen5Size OBJECT-TYPE GL PenSize 1-16	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5.1	INTEGER (0..16)	read-write	mandatory
brPageGLPen5GrayLevel OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5.2	INTEGER (0..5)	read-write	mandatory
pen6 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6
brPageGLPen6Size OBJECT-TYPE GL PenSize 1-16	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6.1	INTEGER (0..16)	read-write	mandatory
brPageGLPen6GrayLevel OBJECT-TYPE GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100%	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6.2	INTEGER (0..5)	read-write	mandatory
epson OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4
margin_e OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1
brPageEPSONLeftMargin OBJECT-TYPE EPSON LeftMargin 1270N :0-145 2400Ce :0-176	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.1	INTEGER (0..255)	read-write	mandatory
brPageEPSONRightMargin OBJECT-TYPE EPSON RightMargin 1270N :10-155 2400Ce :10-186	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.2	INTEGER (0..255)	read-write	mandatory
brPageEPSONTopMargin OBJECT-TYPE EPSON TopMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.3	INTEGER (0..200)	read-write	mandatory
brPageEPSONBottomMargin OBJECT-TYPE EPSON BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.4	INTEGER (0..200)	read-write	mandatory
brPageEPSONLines OBJECT-TYPE EPSON Form Line 5-128	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.5	INTEGER (5..128)	read-write	mandatory
auto_e OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2
brPageEPSONAutoLF OBJECT-TYPE EPSON AutoLF 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2.1	INTEGER (0..2)	read-write	mandatory
brPageEPSONAutoMask OBJECT-TYPE EPSON AutoMask 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2.5	INTEGER (0..2)	read-write	mandatory
ibm OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5
margin_i OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1
brPageIBMLeftMargin OBJECT-TYPE IBM LeftMargin 1270N :0-145 2400Ce :0-176	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.1	INTEGER (0..255)	read-write	mandatory
brPageIBMRightMargin OBJECT-TYPE IBM LeftMargin 1270N :10-155 2400Ce :10-186	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.2	INTEGER (0..255)	read-write	mandatory
brPageIBMTopMargin OBJECT-TYPE IBM BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.3	INTEGER (0..200)	read-write	mandatory
brPageIBMBottomMargin OBJECT-TYPE IBM BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.4	INTEGER (0..200)	read-write	mandatory
brPageIBMLines OBJECT-TYPE IBM Form Line 5-128	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.5	INTEGER (5..128)	read-write	mandatory
auto_i OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2
brPageIBMAutoLF OBJECT-TYPE IBM AutoLF 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.1	INTEGER (0..2)	read-write	mandatory
brPageIBMAutoCR OBJECT-TYPE IBM AutoCR 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.2	INTEGER (0..2)	read-write	mandatory
brPageIBMAutoMask OBJECT-TYPE IBM AutoMask 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.5	INTEGER (0..2)	read-write	mandatory
fontsetup OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3
brFontName OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.1	INTEGER (0..99999)	read-write	mandatory
brFontPointSize OBJECT-TYPE unused(400-99975)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.2	INTEGER (4..99999)	read-write	mandatory
brFontPitch OBJECT-TYPE unused(44-9999)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.3	INTEGER (0..9999)	read-write	mandatory
brFontSymbolSet OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.4	INTEGER (0..99999)	read-write	mandatory
controlpanel OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4
reset OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1
brPanelResetUser OBJECT-TYPE User Reset	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1.1	INTEGER (0..100)	read-write	mandatory
brPanelResetFactory OBJECT-TYPE Factory Reset	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1.2	INTEGER (0..100)	read-write	mandatory
test OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2
brPanelTestConfiguration OBJECT-TYPE Print Config page	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.1	INTEGER (0..100)	read-write	mandatory
brPanelTestFontList OBJECT-TYPE Print Fonts list	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.2	INTEGER (0..100)	read-write	mandatory
brPanelTestTestPage OBJECT-TYPE Print Test page	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.3	INTEGER (0..100)	read-write	mandatory
brPanelTestDemoPage OBJECT-TYPE Print Demo page 0:Enable Print Demo page 1:Disable Print Demo page	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.4	INTEGER (0..100)	read-write	mandatory
panellock OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3
brPanelLockPasswd OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.1	INTEGER (0..100)	read-write	mandatory
brPanelLock OBJECT-TYPE The state of panel lock	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.2	INTEGER {off(1), on(2)}	read-only	mandatory
brPanelLockOn OBJECT-TYPE Panel Lock by setting a password.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.3	OCTET STRING	read-write	mandatory
brPanelLockOff OBJECT-TYPE Panel Lock is canceled by inputting a password..	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.4	OCTET STRING	read-write	mandatory
key OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4
brPanelKeyOnline OBJECT-TYPE Press Online Key	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.1	INTEGER (0..1)	read-write	mandatory
brPanelKeyFormFeed OBJECT-TYPE Press FormFeed Key	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.2	INTEGER (0..1)	read-write	mandatory
brPanelKeyContinue OBJECT-TYPE Press Countinue Key	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.3	INTEGER (0..1)	read-write	mandatory
brPanelKeyMode OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.4	INTEGER (0..1)	read-write	mandatory
brPanelKeyGo OBJECT-TYPE Press Go Key	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.5	INTEGER (0..1)	read-write	mandatory
brPanelKeyJobCancel OBJECT-TYPE Press JobCancel Key	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.6	INTEGER (0..1)	read-write	mandatory
brPanelKeyReprint OBJECT-TYPE Press Reprint Key	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.7	INTEGER (0..1)	read-write	mandatory
brPanelKeySecure OBJECT-TYPE Press SecurePrint Key	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.8	INTEGER (0..1)	read-write	mandatory
panelinfo OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5
brLCDMode1 OBJECT-TYPE LCD Display Mode. 1:fix 2:blink 3:scroll	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.1	INTEGER {fix(1), blink(2), scroll(3), blinkScroll(4)}	read-only	mandatory
brLCDString1 OBJECT-TYPE LCD Display String of first line.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.2	OCTET STRING	read-only	mandatory
brLCDMode2 OBJECT-TYPE LCD Display Mode. 1:fix 2:blink 3:scroll	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.3	INTEGER {fix(1), blink(2), scroll(3)}	read-only	mandatory
brLCDString2 OBJECT-TYPE LCD Display String of second line.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.4	OCTET STRING	read-only	mandatory
brLCDString16fix OBJECT-TYPE LCD Display String of 16fix.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.5	DisplayString	read-only	mandatory
brBackLightColor OBJECT-TYPE LCD Display Mode. 0:Off 1:Green 2:Orange 3:Red	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.6	INTEGER {green(1), orange(2), red(3), notsupport(255)}	read-only	mandatory
brLCDMode3 OBJECT-TYPE LCD Display Mode. 1:fix 2:blink 3:scroll	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.7	INTEGER {fix(1), blink(2), scroll(3), blinkScroll(4)}	read-only	mandatory
brLCDString3 OBJECT-TYPE LCD Display String of first line.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.8	OCTET STRING	read-only	mandatory
brLCDMode4 OBJECT-TYPE LCD Display Mode. 1:fix 2:blink 3:scroll	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.9	INTEGER {fix(1), blink(2), scroll(3), blinkScroll(4)}	read-only	mandatory
brLCDString4 OBJECT-TYPE LCD Display String of first line.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.10	OCTET STRING	read-only	mandatory
brLCDMode5 OBJECT-TYPE LCD Display Mode. 1:fix 2:blink 3:scroll	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.11	INTEGER {fix(1), blink(2), scroll(3), blinkScroll(4)}	read-only	mandatory
brLCDString5 OBJECT-TYPE LCD Display String of first line.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.12	OCTET STRING	read-only	mandatory
brLCDContrast OBJECT-TYPE This value adjusts the contrast of the LCD Display.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.13	INTEGER	read-write	mandatory
printerinfomation OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5
brInfoSerialNumber OBJECT-TYPE Serial number of printer	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.1	OCTET STRING	read-only	mandatory
brInfoType OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.2	INTEGER (0..255)	read-only	mandatory
version OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3
brInfoUpperMIBVer OBJECT-TYPE unused (upper digit of the MIB version)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3.1	INTEGER (0..255)	read-only	mandatory
brInfoLowerMIBVer OBJECT-TYPE unused (lower digit of the MIB version)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3.2	INTEGER (0..255)	read-only	mandatory
brInfoStatus OBJECT-TYPE Status message ID	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.4	INTEGER (0..255)	read-only	mandatory
brInfoNetVerUpStatus OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.5	INTEGER (0..255)	read-only	mandatory
brInfoPrinterUStatus OBJECT-TYPE Status ID	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.6	INTEGER	read-only	mandatory
brInfoPConSupported OBJECT-TYPE BRPCon support 0:not supported 1:supported	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.7	INTEGER	read-only	mandatory
brInfoMaintenance OBJECT-TYPE Maintenance info.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.8	OCTET STRING	read-only	mandatory
brInfoModelNumber OBJECT-TYPE Printer Model ID 4:2400Ce 5:3400CN 6:3260 8:2460 9:2600cn 11:3450cn 13:am 14:zlhe 15:zl2 16:jigen 17:aml 18:l4c 19: ALL 20: AL LED 21: AL LCD 22: HL-4040CN 23: ALL China 24: HL-4050CDN/HL-4070CDW 25: ALL2 101:ZL MFC FB type 102:ZL MFC Normal type 103:BH MFC Nornal type 104:BH MFC FB type 105:ZL MFC with HS 106:BH MFC with HS 107: ZL2FB 108: BHL2MFC 109: BHL2FB 110: ZL2MFC 111: Mini2 112: Mini2 ADF 113: BH3FB 114: BH3MFC 115: ALL-MFC 116: ALL-FB 117: SLow4C 118: mini2eColorLCD, 119: mini2eColorLCD ADF 120: AL-FB 121: DCP540 122: DCP750 123: MFC440 124: MFC665 125: MFC850 126: MFC860 127: MFC5460 128: MFC5860 129: DCP6150 130: DCP6260 131: MFC6460 132: MFC6860 133: DCP770 134: MFC480 135: AC-FB CIS 136: AC-FB CCD 137: MFC7440 138: MFC7840 139: MFC5490 140: MFC5890 141: MFC6490 142: DCP6690 143: MFC6890 144: DCP585 145: MFC490 146: MFC790 147: MFC990 148: MFC930	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.9	INTEGER {hl2400ce(4), hl3400CN(5), hl3260(6), hl2460(8), hl2600cn(9), hl3450cn(11), am(13), zlhe(14), zl2(15), jigen(16), aml(17), l4c(18), all(19), alLedModel(20), alLcdModel(21), hl4040(22), allchn(23), hl4050hl4070(24), all2(25), zlfb(101), zl(102), bh(103), bhfb(104), zlhs(105), bhhs(106), zl2fb(107), bhl2mfc(108), bhl2fb(109), zl2mfc(110), mini2(111), mini2adf(112), bh3fb(113), bh3mfc(114), allmfc(115), allfb(116), slow4c(117), mini2eColorLCD(118), mini2eColorLCDADF(119), alfb(120), dcp540(121), dcp750(122), mfc440(123), mfc665(124), mfc850(125), mfc860(126), mfc5460(127), mfc5860(128), dcp6150(129), dcp6260(130), dcp6460(131), dcp6860(132), dcp770(133), mfc480(134), acfbCIS(135), acfbCCD(136), mfc7440(137), mfc7840(138), mfc5490(139), mfc5890(140), mfc6490(141), dcp6690(142), mfc6890(143), dcp585(144), mfc490(145), mfc790(146), mfc990(147), mfc930(148)}	read-only	mandatory
brInfoCounter OBJECT-TYPE Page counter	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.10	OCTET STRING	read-only	mandatory
brInfoNextCare OBJECT-TYPE Remaining life info.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.11	OCTET STRING	read-only	mandatory
brInfoHDDSlot1 OBJECT-TYPE Card Slot1 status 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.12	INTEGER (0..6)	read-only	mandatory
brInfoHDDSlot2 OBJECT-TYPE Card Slot2 status 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.13	INTEGER (0..6)	read-only	mandatory
brInfoHDDInternal OBJECT-TYPE Internal HDD info. 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format)	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.14	INTEGER (0..6)	read-only	mandatory
brInfoHDDSize OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.15	OCTET STRING	read-only	mandatory
brInfoSolutionsCenterURL OBJECT-TYPE Brother Solutions Center's URL	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.16	DisplayString	read-only	mandatory
brInfoDeviceRomVersion OBJECT-TYPE The device rom version	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.17	DisplayString	read-only	mandatory
brInfoCoverage OBJECT-TYPE Coverage info.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.18	OCTET STRING	read-only	mandatory
brInfoEstimatedPagesRemaining OBJECT-TYPE Estimated pages remaining info.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.19	Counter	read-only	mandatory
brInfoReplaceCount OBJECT-TYPE Replace count info.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.20	OCTET STRING	read-only	mandatory
brInfoJamCount OBJECT-TYPE Jam count info.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.21	OCTET STRING	read-only	mandatory
brInfoJamCountClear OBJECT-TYPE Jam count Clear.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.22	INTEGER	read-write	mandatory
brInfoReplaceTime OBJECT-TYPE Replace count time info.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.23	OCTET STRING	read-only	mandatory
brInfoDeviceSubRomVersion OBJECT-TYPE The PCL/PS ROM Version.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.24	OCTET STRING	read-only	mandatory
brInfoAlertVersion OBJECT-TYPE It indicates the version that prtAlertLocation is implemented correctly.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.25	INTEGER	read-only	mandatory
brInfoBlackPrint OBJECT-TYPE It indicates black only print enable/disable info 0: disable 1: enable	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.26	INTEGER (0..1)	read-only	mandatory
errorHistory OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51
brErrorHistoryCount OBJECT-TYPE Maximum number of Error History.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.1	INTEGER	read-only	mandatory
brErrorHistoryTable OBJECT-TYPE This table represents Error History.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2		not-accessible	mandatory
brErrorHistoryEntry OBJECT-TYPE A row in the ErrorHistory table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1		not-accessible	mandatory
brErrorHistoryIndex OBJECT-TYPE A unique value for the error history.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1.1	INTEGER (1..65535)	read-only	mandatory
brErrorHistoryDescription OBJECT-TYPE The ErrorHistory Description.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1.2	OCTET STRING	read-only	mandatory
brErrorHistoryAllClear OBJECT-TYPE All clear Error History.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.3	INTEGER	read-write	mandatory
brCommunicationErrorHistoryCount OBJECT-TYPE Maximum number of Communication Error History.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.11	INTEGER	read-only	mandatory
brCommunicationErrorHistoryTable OBJECT-TYPE This table represents Communication Error History.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12		not-accessible	mandatory
brCommunicationErrorHistoryEntry OBJECT-TYPE A row in the Communication ErrorHistory table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1		not-accessible	mandatory
brCommunicationErrorHistoryIndex OBJECT-TYPE A unique value for the Communication error history.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1.1	INTEGER (1..65535)	read-only	mandatory
brCommunicationErrorHistoryDescription OBJECT-TYPE The Communication Error History Description.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1.2	OCTET STRING	read-only	mandatory
printPages OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52
brPrintPagesTable OBJECT-TYPE This table represents Print Pages.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1		not-accessible	mandatory
brPrintPagesEntry OBJECT-TYPE A row in the PrintPages table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1		not-accessible	mandatory
brPrintPagesIndex OBJECT-TYPE A unique value for the print pages.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.1	INTEGER (1..65535)	read-only	mandatory
brPrintPagesPaperSize OBJECT-TYPE The paper size of print pages.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.2	INTEGER {executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), legalA4Long(909), b6A5A6(910), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), b6JIS(924), otherPage(999)}	read-only	mandatory
brPrintPages OBJECT-TYPE The count of Print pages.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.3	Counter	read-only	mandatory
brPrintPagesMediaPlaceTable OBJECT-TYPE This table represents Print Pages of Media Place.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11		not-accessible	mandatory
brPrintPagesMediaPlaceEntry OBJECT-TYPE A row in the PrintPages Media Place table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1		not-accessible	mandatory
brPrintPagesMediaPlaceIndex OBJECT-TYPE A unique value for the print pages of media place.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.1	INTEGER (1..65535)	read-only	mandatory
brPrintPagesMediaPlaceType OBJECT-TYPE The place of media.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.2	INTEGER {face(1), back(2)}	read-only	mandatory
brPrintPagesMediaPlaceCounter OBJECT-TYPE The count of Print pages of media place.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.3	Counter	read-only	mandatory
brPrintPagesFuncTable OBJECT-TYPE This table represents Print Pages of each function.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21		not-accessible	mandatory
brPrintPagesFuncEntry OBJECT-TYPE A row in the PrintPages Func table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1		not-accessible	mandatory
brPrintPagesFuncIndex OBJECT-TYPE A unique value for the print pages of each function.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.1	INTEGER (1..65535)	read-only	mandatory
brPrintPagesFuncType OBJECT-TYPE The kind of function.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.2	INTEGER {pcPrinttotal(1), faxtotal(2), copytotal(3), copycolor(4), pcPrintcolor(5), faxcolor(6), pcPrintmono(7), faxmono(8), copymono(9)}	read-only	mandatory
brPrintPagesFuncCounter OBJECT-TYPE The count of Print pages of the function.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.3	Counter	read-only	mandatory
brPrintPagesPaperTypeTable OBJECT-TYPE This table represents Print Pages of Paper Type.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31		not-accessible	mandatory
brPrintPagesPaperTypeEntry OBJECT-TYPE A row in the PrintPages Paper Type table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1		not-accessible	mandatory
brPrintPagesPaperTypeIndex OBJECT-TYPE A unique value for the print pages of paper type.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.1	INTEGER (1..32767)	read-only	mandatory
brPrintPagesPaperTypeType OBJECT-TYPE The type of paper.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.2	INTEGER {transparency(3), regularthinrecycled(12), thickthickerbond(13), envelopesenvthickenvthin(14)}	read-only	mandatory
brPrintPagesPaperTypeCounter OBJECT-TYPE The count of Print pages of paper type.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.3	Counter	read-only	mandatory
capability OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53
copies OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1
brCapabilityCopiesMax OBJECT-TYPE The maximum value of copies	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1.1	INTEGER	read-only	mandatory
brCapabilityCopiesMin OBJECT-TYPE The minimum value of copies	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1.2	INTEGER	read-only	mandatory
orientation OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2
brCapabilityOrientationCount OBJECT-TYPE The number of support of orientation	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.1	INTEGER	read-only	mandatory
brCapabilityOrientationTable OBJECT-TYPE This table represents capability of orientation.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2		not-accessible	mandatory
brCapabilityOrientationEntry OBJECT-TYPE A row in the capability of orientation table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1		not-accessible	mandatory
brCapabilityOrientationIndex OBJECT-TYPE A unique value for the capability of orientation.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1.1	INTEGER (1..65535)	read-only	mandatory
brCapabilityOrientationName OBJECT-TYPE The name of orientation currently supported.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1.2	DisplayString	read-only	mandatory
paper OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3
brCapabilityPaperCount OBJECT-TYPE The number of kinds of the paper currently supported	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.1	INTEGER	read-only	mandatory
brCapabilityPaperTable OBJECT-TYPE This table represents capability of paper.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2		not-accessible	mandatory
brCapabilityPaperEntry OBJECT-TYPE A row in the capability of paper table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1		not-accessible	mandatory
brCapabilityPaperIndex OBJECT-TYPE A unique value for the capability of paper.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1.1	INTEGER (1..65535)	read-only	mandatory
brCapabilityPaperName OBJECT-TYPE The name of paper currently supported.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1.2	DisplayString	read-only	mandatory
mediatype OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4
brCapabilityMediatypeCount OBJECT-TYPE The number of kinds of the mediatype currently supported	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.1	INTEGER	read-only	mandatory
brCapabilityMediatypeTable OBJECT-TYPE This table represents capability of mediatype.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2		not-accessible	mandatory
brCapabilityMediatypeEntry OBJECT-TYPE A row in the capability of mediatype table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1		not-accessible	mandatory
brCapabilityMediatypeIndex OBJECT-TYPE A unique value for the capability of mediatype.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1.1	INTEGER (1..65535)	read-only	mandatory
brCapabilityMediatypeName OBJECT-TYPE The name of mediatype currently supported.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1.2	DisplayString	read-only	mandatory
resolution OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5
brCapabilityResolutionCount OBJECT-TYPE The number of kinds of the resolution currently supported	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.1	INTEGER	read-only	mandatory
brCapabilityResolutionTable OBJECT-TYPE This table represents capability of resolution.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2		not-accessible	mandatory
brCapabilityResolutionEntry OBJECT-TYPE A row in the capability of resolution table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1		not-accessible	mandatory
brCapabilityResolutionIndex OBJECT-TYPE A unique value for the capability of resolution.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1.1	INTEGER (1..65535)	read-only	mandatory
brCapabilityResolution OBJECT-TYPE The value of resolution currently supported.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1.2	INTEGER	read-only	mandatory
countinfo OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54
pfkit OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1
brPfKitIndexCount OBJECT-TYPE Maximum number of PF kit.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.1	INTEGER	read-only	mandatory
brPfKitTable OBJECT-TYPE This table represents PF kit.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2		not-accessible	mandatory
brPfKitEntry OBJECT-TYPE A row in the PfKit table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1		not-accessible	mandatory
brPfKitIndex OBJECT-TYPE A unique value for the PF kit.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.1	INTEGER (1..65535)	read-only	mandatory
brPfKitType OBJECT-TYPE The PF kit ID.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.2	INTEGER {pfkit1(1), pfkit2(2), pfkit3(3), pfkit4(4), pfkitmp(10), pfkitdx(20)}	read-only	mandatory
brPfKitCount OBJECT-TYPE Counter of the PF kit.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.3	Counter	read-only	mandatory
scancount OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2
brScanCountIndexCount OBJECT-TYPE Maximum number of Scan place.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.1	INTEGER	read-only	mandatory
brScanCountTable OBJECT-TYPE This table represents scan count.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2		not-accessible	mandatory
brScanCountEntry OBJECT-TYPE A row in the ScanCount table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1		not-accessible	mandatory
brScanCountIndex OBJECT-TYPE A unique value for the scan count place.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.1	INTEGER (1..65535)	read-only	mandatory
brScanCountType OBJECT-TYPE The scan place ID.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.2	INTEGER {adf(1), fb(2), adfdx(3)}	read-only	mandatory
brScanCountCounter OBJECT-TYPE Counter of the scan.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.3	Counter	read-only	mandatory
firmwareupdatekeyword OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55
brFirmwareUpdateKeywordCount OBJECT-TYPE The number of Firmware for update the device.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.1	INTEGER (1..4)	read-only	mandatory
brFirmwareUpdateKeywordTable OBJECT-TYPE The table represents the number of Firmware for Update.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2		not-accessible	mandatory
brFirmwareUpdateKeywordEntry OBJECT-TYPE A row in the FirmwareUpdateKeyword table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1		not-accessible	mandatory
brFirmwareUpdateKeywordIndex OBJECT-TYPE	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1.1	INTEGER (0..4)	read-only	mandatory
brFirmwareUpdateKeyword OBJECT-TYPE The keyword for firemware update the device.	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1.2	OCTET STRING (SIZE(0..255))	read-only	mandatory
printerstatus OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.6
brStatusSleep OBJECT-TYPE Sleeping status 0:ready 1:sleep	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.6.1	INTEGER (0..2)	read-only	mandatory
secret OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7
brSecretMPRetry OBJECT-TYPE unused	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.1	INTEGER (0..255)	read-write	mandatory
brSecretReprint OBJECT-TYPE Secret Reprint mode 0:Off 111:On 222:Job	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.2	INTEGER	read-write	mandatory
brFontSetting OBJECT-TYPE Font Setting 0:Brother Font 1:Agfa Font	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.3	INTEGER (0..1)	read-only	mandatory
brFontSwitchOn OBJECT-TYPE Switch of Agfa Font On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.4	INTEGER (0..999999)	read-write	mandatory
brFontSwitchOff OBJECT-TYPE Switch of Agfa Font Off	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.5	INTEGER (0..999999)	read-write	mandatory
adminsetting OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8
clockfunction OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1
brClockFuncTimeStyle OBJECT-TYPE Time format 0:YMD 1:MDY 2:DMY	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.1	INTEGER (0..2)	read-write	mandatory
brClockFuncSummerTime OBJECT-TYPE Summer time 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.2	INTEGER (0..2)	read-write	mandatory
brClockFuncTimeZone OBJECT-TYPE TimeZone	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.3	INTEGER (-24..24)	read-write	mandatory
brClockFuncZoneSet OBJECT-TYPE TimeZone enable 1:Off 2:On	1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.4	INTEGER (0..2)	read-write	mandatory
interface OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4
npCard OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3
npSys OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1
npConfig OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1.1
brBasicSettingConfigured OBJECT-TYPE This value indicates that the basic setting is configured or not. The condition entry of this value is model dependent.	1.3.6.1.4.1.2435.2.4.3.1.1.1	INTEGER {unconfigured(1), configured(2)}	read-only	mandatory
adminCapa OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1.99
brAdminCapability OBJECT-TYPE AdminCapability	1.3.6.1.4.1.2435.2.4.3.1.99.1	OCTET STRING	read-only	mandatory
userSetting OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1.100
brUserPasswordVerify OBJECT-TYPE Submit the print server's user password for verification. An error will be returned if the password is incorrect.	1.3.6.1.4.1.2435.2.4.3.1.100.1	DisplayString	read-write	mandatory
brUserPassword OBJECT-TYPE Set the print server's user password value.	1.3.6.1.4.1.2435.2.4.3.1.100.2	DisplayString	read-write	mandatory
verify OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1.101
brpsVerifyPhysAddress OBJECT-TYPE For verify physical address.	1.3.6.1.4.1.2435.2.4.3.1.101.1	OCTET STRING (SIZE(0..6))	read-write	mandatory
npTcp OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.6
lpd OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.6.99
banner OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.6.99.1
brLPDBannerPage OBJECT-TYPE LPR banner page 0: disabled. 1: enabled. 2: force to print.	1.3.6.1.4.1.2435.2.4.3.6.99.1.1	INTEGER (0..2)	read-write	mandatory
npCtl OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.7
etherN OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.7.99
eNet OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.7.99.1
brENetModeSupported OBJECT-TYPE ENet Mode 0:not supported 1:supported	1.3.6.1.4.1.2435.2.4.3.7.99.1.1	INTEGER (0..1)	read-only	mandatory
brENetMode OBJECT-TYPE ENet Mode 0:Auto 1:FD100B 2:100Base 3:FD10B 4:10BASE	1.3.6.1.4.1.2435.2.4.3.7.99.1.2	INTEGER (0..255)	read-write	mandatory
npPort OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.13
funa OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.13.10
brFindPort OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.13.10.1	INTEGER (0..65535)	read-write	mandatory
brFindTime OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.13.10.2	INTEGER (0..255)	read-write	mandatory
npSet OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.99
dns OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.99.1
brDNSSupported OBJECT-TYPE DNS resolver 0:not supported 1:supported This is the obsolete MIB that is not currently used.	1.3.6.1.4.1.2435.2.4.3.99.1.1	INTEGER (0..1)	read-only	mandatory
brPrimaryDNSIP OBJECT-TYPE Primary DNS IP Address. This is the obsolete MIB that is not currently used.	1.3.6.1.4.1.2435.2.4.3.99.1.2	OCTET STRING	read-write	mandatory
brSecondaryDNSIP OBJECT-TYPE Secondary DNS IP Address This is the obsolete MIB that is not currently used.	1.3.6.1.4.1.2435.2.4.3.99.1.3	OCTET STRING	read-write	mandatory
brDNSIPSetup OBJECT-TYPE DNS mode 1:static 2:auto	1.3.6.1.4.1.2435.2.4.3.99.1.4	INTEGER {static(1), auto(2)}	read-write	mandatory
brTCPIPConnectTime OBJECT-TYPE TCP/IP connect time.	1.3.6.1.4.1.2435.2.4.3.99.1.5	INTEGER	read-write	mandatory
brAdvancedDNSSupported OBJECT-TYPE DNS resolver 0:not supported 1:supported	1.3.6.1.4.1.2435.2.4.3.99.1.6	INTEGER (0..1)	read-only	mandatory
brPrimaryDNSIPAddress OBJECT-TYPE Primary DNS IP Address	1.3.6.1.4.1.2435.2.4.3.99.1.7	IpAddress	read-write	mandatory
brSecondaryDNSIPAddress OBJECT-TYPE Secondary DNS IP Address	1.3.6.1.4.1.2435.2.4.3.99.1.8	IpAddress	read-write	mandatory
brPOP3ServerName OBJECT-TYPE The FQDN name of the POP3 server.	1.3.6.1.4.1.2435.2.4.3.99.1.9	OCTET STRING (SIZE(0..64))	read-write	mandatory
brSMTPServerName OBJECT-TYPE The FQDN name of the SMTP server.	1.3.6.1.4.1.2435.2.4.3.99.1.10	OCTET STRING (SIZE(0..64))	read-write	mandatory
pushstatus OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.99.2
brPushStatusSupported OBJECT-TYPE Notification 0:not supported 1:supported	1.3.6.1.4.1.2435.2.4.3.99.2.1	INTEGER (0..1)	read-only	mandatory
priadmin OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.99.2.2
brPriMailAddress OBJECT-TYPE Primary Mail Address	1.3.6.1.4.1.2435.2.4.3.99.2.2.1	OCTET STRING	read-write	mandatory
brPriError OBJECT-TYPE Primary Error	1.3.6.1.4.1.2435.2.4.3.99.2.2.2	INTEGER (0..65535)	read-write	mandatory
secadmin OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.99.2.3
brSecMailAddress OBJECT-TYPE Secondary Mail Address	1.3.6.1.4.1.2435.2.4.3.99.2.3.1	OCTET STRING	read-write	mandatory
brSecError OBJECT-TYPE Secondary Error	1.3.6.1.4.1.2435.2.4.3.99.2.3.2	INTEGER (0..65535)	read-write	mandatory
brNotificationCount OBJECT-TYPE Maximum number of Notification Method.	1.3.6.1.4.1.2435.2.4.3.99.2.4	INTEGER (1..127)	read-only	mandatory
brNotificationTable OBJECT-TYPE This table represents Notification Method.	1.3.6.1.4.1.2435.2.4.3.99.2.5		not-accessible	mandatory
brNotificationEntry OBJECT-TYPE A row in the Notification table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.99.2.5.1		not-accessible	mandatory
brNotificationIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.99.2.5.1.1	INTEGER (1..65535)	read-only	mandatory
brNotificationAddress OBJECT-TYPE The Notification Address.	1.3.6.1.4.1.2435.2.4.3.99.2.5.1.2	OCTET STRING	read-write	mandatory
brNotificationStatusGroup OBJECT-TYPE The Notification Status group	1.3.6.1.4.1.2435.2.4.3.99.2.5.1.3	INTEGER	read-write	mandatory
brNotificationShowURLInfo OBJECT-TYPE The setting of show URL infomation at Notification mail.	1.3.6.1.4.1.2435.2.4.3.99.2.5.1.4	INTEGER	read-write	mandatory
brNotificationErrorRule OBJECT-TYPE The setting of sending requirements for Notification.	1.3.6.1.4.1.2435.2.4.3.99.2.5.1.5	OCTET STRING	read-write	mandatory
brNotificationRestoration OBJECT-TYPE The setting of Restoration Notification mail	1.3.6.1.4.1.2435.2.4.3.99.2.5.1.6	INTEGER {off(1), on(2)}	read-write	mandatory
brPrintersEmailaddress OBJECT-TYPE The Printers Email Address.	1.3.6.1.4.1.2435.2.4.3.99.2.6	OCTET STRING	read-write	mandatory
brNotificationVersion OBJECT-TYPE The version of Notification	1.3.6.1.4.1.2435.2.4.3.99.2.7	OCTET STRING	read-only	mandatory
brShowIPAddressInfo OBJECT-TYPE The setting of show IP address infomation at Notification mail.	1.3.6.1.4.1.2435.2.4.3.99.2.8	INTEGER {off(1), on(2)}	read-write	mandatory
brNotificationRuleTable OBJECT-TYPE This table represents Notification Method.	1.3.6.1.4.1.2435.2.4.3.99.2.50		not-accessible	mandatory
brNotificationRuleEntry OBJECT-TYPE A row in the Notification rule table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.99.2.50.1		not-accessible	mandatory
brNotificationRuleIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.99.2.50.1.1	INTEGER (1..65535)	read-only	mandatory
brNotificationStatusID OBJECT-TYPE The Notification Status group ID	1.3.6.1.4.1.2435.2.4.3.99.2.50.1.2	INTEGER {coverOpen(1), jam(2), tonerLow(3), tonerEmpty(4), userConsumableWarning(5), userConsumableError(6), servicemanConsumableWarning(7), servicemanConsumableError(8), changeDrum(9), memoryFull(10), inputMediaError(11), outputFull(12), notInstalled(13), machineError(14), otherErrors(15)}	read-write	mandatory
brNotificationMainRule OBJECT-TYPE The main rule of Notification setting.	1.3.6.1.4.1.2435.2.4.3.99.2.50.1.3	INTEGER {off(1), everytime(2), times(3), minutes(4)}	read-write	mandatory
brNotificationRuleValue OBJECT-TYPE The value of Notification setting.	1.3.6.1.4.1.2435.2.4.3.99.2.50.1.4	INTEGER	read-write	mandatory
pjl OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.99.3
pjlinfo OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.99.3.1
brPJLInfoOptionsTable OBJECT-TYPE This table represents PJLInfoOptions.	1.3.6.1.4.1.2435.2.4.3.99.3.1.1		not-accessible	mandatory
brPJLInfoOptionsEntry OBJECT-TYPE A row in the PJLInfoOptions table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1		not-accessible	mandatory
brPJLInfoOptionsIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1.1	INTEGER (1..65535)	read-only	mandatory
brPJLInfoOptions OBJECT-TYPE The PJLInfoOptions.	1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1.2	OCTET STRING (SIZE(0..32))	read-only	mandatory
brPJLInfoIntrayconfigTable OBJECT-TYPE This table represents PJLInfoIntrayconfig.	1.3.6.1.4.1.2435.2.4.3.99.3.1.2		not-accessible	mandatory
brPJLInfoIntrayconfigEntry OBJECT-TYPE A row in the PJLInfoIntrayconfig table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1		not-accessible	mandatory
brPJLInfoIntrayconfigIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1.1	INTEGER (1..65535)	read-only	mandatory
brPJLInfoIntrayconfig OBJECT-TYPE The PJLInfoIntrayconfig.	1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1.2	OCTET STRING (SIZE(0..32))	read-only	mandatory
brPJLInfoOuttrayconfigTable OBJECT-TYPE This table represents PJLInfoOuttrayconfig.	1.3.6.1.4.1.2435.2.4.3.99.3.1.3		not-accessible	mandatory
brPJLInfoOuttrayconfigEntry OBJECT-TYPE A row in the PJLInfoOuttrayconfig table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1		not-accessible	mandatory
brPJLInfoOuttrayconfigIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1.1	INTEGER (1..65535)	read-only	mandatory
brPJLInfoOuttrayconfig OBJECT-TYPE The PJLInfoOuttrayconfig.	1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1.2	OCTET STRING (SIZE(0..32))	read-only	mandatory
brPJLInfoDXconfigTable OBJECT-TYPE This table represents PJLInfoDXconfig.	1.3.6.1.4.1.2435.2.4.3.99.3.1.4		not-accessible	mandatory
brPJLInfoDXconfigEntry OBJECT-TYPE A row in the PJLInfoDXconfig table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1		not-accessible	mandatory
brPJLInfoDXconfigIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1.1	INTEGER (1..65535)	read-only	mandatory
brPJLInfoDXconfig OBJECT-TYPE The PJLInfoDXconfig.	1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1.2	OCTET STRING (SIZE(0..32))	read-only	mandatory
brPJLInfoStorageconfigTable OBJECT-TYPE This table represents PJLInfoStorageconfig.	1.3.6.1.4.1.2435.2.4.3.99.3.1.5		not-accessible	mandatory
brPJLInfoStorageconfigEntry OBJECT-TYPE A row in the PJLInfoStorageconfig table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1		not-accessible	mandatory
brPJLInfoStorageconfigIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1.1	INTEGER (1..65535)	read-only	mandatory
brPJLInfoStorageconfig OBJECT-TYPE The PJLInfoStorageconfig.	1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1.2	OCTET STRING (SIZE(0..32))	read-only	mandatory
brPJLInfoFirmwareUpdateconfigTable OBJECT-TYPE This table represents PJLInfoFirmwareUpdateconfig.	1.3.6.1.4.1.2435.2.4.3.99.3.1.6		not-accessible	mandatory
brPJLInfoFirmwareUpdateconfigEntry OBJECT-TYPE A row in the PJLInfoFirmwareUpdateconfig table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1		not-accessible	mandatory
brPJLInfoFirmwareUpdateconfigIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1.1	INTEGER (1..65535)	read-only	mandatory
brPJLInfoFirmwareUpdateconfig OBJECT-TYPE The PJLInfoFirmwareUpdateconfig.	1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1.2	OCTET STRING (SIZE(0..255))	read-only	mandatory
eMailReports OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.99.4
brEmailReportsSupported OBJECT-TYPE E-mail reports 0:not supported 1:supported	1.3.6.1.4.1.2435.2.4.3.99.4.1	INTEGER (0..1)	read-only	mandatory
brEmailReportsCount OBJECT-TYPE The number of Administrator for E-mail reports.	1.3.6.1.4.1.2435.2.4.3.99.4.2	INTEGER	read-only	mandatory
brEmailReportsTable OBJECT-TYPE This table represents E-mail reports.	1.3.6.1.4.1.2435.2.4.3.99.4.11		not-accessible	mandatory
brEmailReportsEntry OBJECT-TYPE A row in the BrEmailReportsEntry table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1		not-accessible	mandatory
brEmailReportsIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1.1	INTEGER (1..16)	read-only	mandatory
brEmailReportsAddress OBJECT-TYPE The E-mail address of Administrator for E-mail reports.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1.2	OCTET STRING (SIZE(0..60))	read-write	mandatory
brEmailReportsFrequency OBJECT-TYPE The frequency of sending E-mail reports.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1.3	INTEGER {daily(1), weekly(2), monthly(3)}	read-write	mandatory
brEmailReportsTime OBJECT-TYPE The time setting for E-mail reports.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1.4	OCTET STRING	read-write	mandatory
brEmailReportsWeek OBJECT-TYPE The setting of day of the week for E-mail reports.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1.5	INTEGER {sunday(1), monday(2), tuesday(3), wednesday(4), thursday(5), friday(6), saturday(7)}	read-write	mandatory
brEmailReportsDate OBJECT-TYPE The setting of day for E-mail reports when real time clock exists.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1.6	INTEGER (1..31)	read-write	mandatory
brEmailReportsSendReportNow OBJECT-TYPE The setting of Send Report Now function for E-mail reports.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1.7	INTEGER {off(1), on(2)}	read-write	mandatory
brEmailReportsSendReportatPowerOn OBJECT-TYPE The setting of Send Report at PowerOn for E-mail reports.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1.8	INTEGER {off(1), on(2)}	read-write	mandatory
brEmailReportsNoRTCFrequency OBJECT-TYPE The setting of day for E-mail reports when real time clock does not exists.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1.9	INTEGER (1..30)	read-write	mandatory
brEmailReportsReportFormat OBJECT-TYPE The setting of ReportFormat for E-mail reports.	1.3.6.1.4.1.2435.2.4.3.99.4.11.1.10	INTEGER {plaintext(1), xml(2)}	read-write	mandatory
wireless OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100
wlInfo OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.1
wlCapability OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.1.1
brpsWLanDot11Supported OBJECT-TYPE Flags per bit. 802.11a bit1=1 802.11b bit2=1 802.11g bit3=1	1.3.6.1.4.1.2435.2.4.3.100.1.1.1	INTEGER	read-only	mandatory
brpsWLanAvailableChannel OBJECT-TYPE The available channel list.	1.3.6.1.4.1.2435.2.4.3.100.1.1.2	OCTET STRING	read-only	mandatory
brpsWLanCapabilityEncryptModeCount OBJECT-TYPE index	1.3.6.1.4.1.2435.2.4.3.100.1.1.3	INTEGER	read-only	mandatory
brpsWLanCapabilityEncryptModeTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.100.1.1.4		not-accessible	mandatory
brpsWLanCapabilityEncryptModeEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1		not-accessible	mandatory
brpsWLanCapabilityEncryptModeIndex OBJECT-TYPE index	1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.1	INTEGER (1..255)	read-only	mandatory
brpsWLanCapabilityEncryptModeType OBJECT-TYPE Encrypt Mode Type	1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.2	INTEGER {none(1), wep(2), tkip(3), aes(4), ckip(5)}	read-only	mandatory
brpsWLanCapabilityEncryptModeDescription OBJECT-TYPE Encrypt Mode description	1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.3	OCTET STRING	read-only	mandatory
brpsWLanCapabilityEncryptModeSupported OBJECT-TYPE 0: Not Supported 1: Supported	1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.4	INTEGER	read-only	mandatory
brpsWLanCapabilityAuthModeCount OBJECT-TYPE index	1.3.6.1.4.1.2435.2.4.3.100.1.1.5	INTEGER	read-only	mandatory
brpsWLanCapabilityAuthModeTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.100.1.1.6		not-accessible	mandatory
brpsWLanCapabilityAuthModeEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1		not-accessible	mandatory
brpsWLanCapabilitAuthModeIndex OBJECT-TYPE index	1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.1	INTEGER (1..255)	read-only	mandatory
brpsWLanCapabilityAuthModeType OBJECT-TYPE Auth Mode Type	1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.2	INTEGER {opensystem(1), shardkey(2), wpa-psk(3), wpa-none(4), wpa(5), wpa2(6), leap(7), eapfast-none(8), eapfast-mschapv2(9), eapfast-gtc(10), eapfast-tls(11), wpa2-psk(12)}	read-only	mandatory
brpsWLanCapabilityAuthModeDescription OBJECT-TYPE Auth Mode description	1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.3	OCTET STRING	read-only	mandatory
brpsWLanCapabilityAuthModeSupported OBJECT-TYPE 0: Not Supported 1: Supported	1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.4	INTEGER	read-only	mandatory
brpsWLanCapabilityAuthEAPCount OBJECT-TYPE index	1.3.6.1.4.1.2435.2.4.3.100.1.1.7	INTEGER	read-only	mandatory
brpsWLanCapabilityAuthEAPTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.100.1.1.8		not-accessible	mandatory
brpsWLanCapabilityAuthEAPEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1		not-accessible	mandatory
brpsWLanCapabilityAuthEAPIndex OBJECT-TYPE index	1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.1	INTEGER (1..65535)	read-only	mandatory
brpsWLanCapabilityAuthEAPType OBJECT-TYPE Auth EAP Type	1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.2	INTEGER {eap-md5(1), eap-tls(2), eap-ttls(3), peap(4), leap(5), eapfast-none(6), eapfast-mschapv2(7), eapfast-gtc(8), eapfast-tls(9)}	read-only	mandatory
brpsWLanCapabilityAuthEAPDescription OBJECT-TYPE Auth EAP description	1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.3	OCTET STRING	read-only	mandatory
brpsWLanCapabilityAuthEAPSupported OBJECT-TYPE 0: Not Supported 1: Supported	1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.4	INTEGER	read-only	mandatory
brpsWLanCapabilityAuthEAPSupportAuthentication OBJECT-TYPE put supported authentication protocol as bit. 1bit:802.1X 2bit:WPA 3bit:WPA2 4bit:CCKM	1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.5	INTEGER (0..15)	read-only	mandatory
brpsWLanCapabilityAuthEAPSupportEncryption OBJECT-TYPE put supported encryption as bit. 1bit:WEP 2bit:CKIP 3bit:TKIP 4bit:AES	1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.6	INTEGER (0..15)	read-only	mandatory
wlGeneralInfo OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.1.2
brpsWLanDestination OBJECT-TYPE The destination of this NIC.	1.3.6.1.4.1.2435.2.4.3.100.1.2.1	INTEGER	read-only	mandatory
brpsWLanTransmitLevel OBJECT-TYPE The level of the transmitting power.	1.3.6.1.4.1.2435.2.4.3.100.1.2.2	INTEGER	read-only	mandatory
brpsPit3WLanTestStatus OBJECT-TYPE The test status of pit3 for WLAN.	1.3.6.1.4.1.2435.2.4.3.100.1.2.3	INTEGER	read-only	mandatory
wlNetSearch OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.1.11
brpsWLanNetSearchSupported OBJECT-TYPE 0 indicates the Wireless network serch function is not supported. 1 indicates the Wireless network serch function is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.100.1.11.1	INTEGER	read-only	mandatory
brpsAvailableWLanScan OBJECT-TYPE Read: unsupported(1), supported(2) Set: <Format>= <1:Start \| 2:Start w/ option>[;<sWLanName>;<sWLanCommMode>[;<sWLanChannel>]]	1.3.6.1.4.1.2435.2.4.3.100.1.11.2	OCTET STRING	read-write	mandatory
brpsAvailableWLanScanWaitTime OBJECT-TYPE Scan Wait Time	1.3.6.1.4.1.2435.2.4.3.100.1.11.3	INTEGER	read-only	mandatory
brpsAvailableWLanCount OBJECT-TYPE Available wireless LAN count.	1.3.6.1.4.1.2435.2.4.3.100.1.11.10	INTEGER	read-only	mandatory
brpsAvailableWLanTable OBJECT-TYPE This table represents Available Wireless LAN Info.	1.3.6.1.4.1.2435.2.4.3.100.1.11.11		not-accessible	mandatory
brpsAvailableWLanEntry OBJECT-TYPE A row in the brpsAvailableWLanTable table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1		not-accessible	mandatory
brpsAvailableWLanIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.1	INTEGER (1..255)	read-only	mandatory
brpsAvailableWLanName OBJECT-TYPE The available wireless LAN name.	1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.2	OCTET STRING (SIZE(0..32))	read-only	mandatory
brpsAvailableWLanMode OBJECT-TYPE The available wireless LAN mode.	1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.3	INTEGER {dot11b-gAuto(1), dot11b(2), dot11g(3)}	read-only	mandatory
brpsAvailableWLanCommMode OBJECT-TYPE The available wireless LAN communication mode.	1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.4	INTEGER {accesPoint(1), adhoc-Wi-Fi(2)}	read-only	mandatory
brpsAvailableWLanChannel OBJECT-TYPE The available wireless LAN channel.	1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.5	INTEGER	read-only	mandatory
brpsAvailableWLanPowerLevel OBJECT-TYPE The available wireless LAN power level.	1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.6	INTEGER	read-only	mandatory
brpsAvailableWLanAuthMode OBJECT-TYPE The available wireless LAN authentication mode.	1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.7	INTEGER {none(1), active(2)}	read-only	mandatory
brpsAvailableWLanEncryptMode OBJECT-TYPE The available wireless LAN encryption mode.	1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.8	INTEGER {none(1), active(2), wep(3), tkip(4)}	read-only	mandatory
wlAOSS OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.1.12
brpsWLanAOSSSupported OBJECT-TYPE 0 indicates AOSS is not supported. 1 indicates AOSS is supported.	1.3.6.1.4.1.2435.2.4.3.100.1.12.1	INTEGER (0..1)	read-only	mandatory
brpsWLanAOSSIsRunnning OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.100.1.12.2	INTEGER (0..1)	read-only	mandatory
wlSES OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.1.13
brpsWLanSESSupported OBJECT-TYPE 0 indicates SES is not supported. 1 indicates SES is supported.	1.3.6.1.4.1.2435.2.4.3.100.1.13.1	INTEGER (0..1)	read-only	mandatory
wlWPS OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.1.14
brpsWLanWPSSupported OBJECT-TYPE 0 indicates WPS is not supported. 1 indicates WPS is supported.	1.3.6.1.4.1.2435.2.4.3.100.1.14.1	INTEGER (0..1)	read-only	mandatory
brpsWLanWPSResult OBJECT-TYPE 0 indicates WPS is successful. 1 indicates WPS is not successful. -1 indicates WPS is being set up.	1.3.6.1.4.1.2435.2.4.3.100.1.14.2	INTEGER (-1..1)	read-only	mandatory
wlSimpleWizard OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.1.15
brWlanSimpleWizardSupported OBJECT-TYPE WLAN Simple Wizard support information. 0 indicates Simple Wizard is not supported. 1 indicates Simple Wizard is supported.	1.3.6.1.4.1.2435.2.4.3.100.1.15.1	INTEGER (0..1)	read-only	mandatory
brWlanSimpleWizardPassword OBJECT-TYPE Simple Wizard Password. Max size 64	1.3.6.1.4.1.2435.2.4.3.100.1.15.2	OCTET STRING (SIZE(0..64))	read-write	mandatory
wlSetup OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.11
wlGeneral OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.11.1
brpsWLanAPSetupMode OBJECT-TYPE AP setup mode status.	1.3.6.1.4.1.2435.2.4.3.100.11.1.1	INTEGER {false(1), true(2)}	read-only	mandatory
brpsWLanMode OBJECT-TYPE Wireless LAN mode.	1.3.6.1.4.1.2435.2.4.3.100.11.1.2	INTEGER {dot11b-gAuto(1), dot11b(2), dot11g(3), dot11g-turbo(4)}	read-write	mandatory
brpsWLanName OBJECT-TYPE The SSID setting.	1.3.6.1.4.1.2435.2.4.3.100.11.1.3	OCTET STRING (SIZE(0..32))	read-write	mandatory
brpsWLanCommMode OBJECT-TYPE Wireless LAN communication mode.	1.3.6.1.4.1.2435.2.4.3.100.11.1.4	INTEGER {infrastructure(1), ad-Hoc-WiFi(2), ad-Hoc(3)}	read-write	mandatory
brpsWLanChannel OBJECT-TYPE Wireless LAN channel setting.	1.3.6.1.4.1.2435.2.4.3.100.11.1.5	INTEGER	read-write	mandatory
wlAdvanced OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.11.5
brpsWLanCtsMode OBJECT-TYPE Wireless LAN CTS mode setting.	1.3.6.1.4.1.2435.2.4.3.100.11.5.1	INTEGER {auto(1), always(2), none(3)}	read-write	mandatory
brpsWLanCtsRate OBJECT-TYPE Wireless LAN CTS rate setting. However, the unit is 1/10.	1.3.6.1.4.1.2435.2.4.3.100.11.5.2	INTEGER (0..32767)	read-write	mandatory
brpsWLanCtsType OBJECT-TYPE Wireless LAN CTS type setting.	1.3.6.1.4.1.2435.2.4.3.100.11.5.3	INTEGER {only(1), rts-cts(2)}	read-write	mandatory
brpsWLanRtsCtsThreshold OBJECT-TYPE Wireless LAN RTS/CTS threshold setting.	1.3.6.1.4.1.2435.2.4.3.100.11.5.4	INTEGER (256..2346)	read-write	mandatory
brpsWLanLengthThreshold OBJECT-TYPE Wireless LAN length threshold setting.	1.3.6.1.4.1.2435.2.4.3.100.11.5.5	INTEGER (256..2346)	read-write	mandatory
brpsWLanDataRetry OBJECT-TYPE Wireless LAN DATA retyr setting.	1.3.6.1.4.1.2435.2.4.3.100.11.5.6	INTEGER (0..15)	read-write	mandatory
brpsWLanTransmitPowerSetting OBJECT-TYPE Wireless LAN transmit power setting.	1.3.6.1.4.1.2435.2.4.3.100.11.5.7	INTEGER {full(1), half(2), quarter(3), one-eighth(4), minimum(5), off(6)}	read-write	mandatory
brpsWLanDeviceType OBJECT-TYPE Wireless LAN operation mode setting.	1.3.6.1.4.1.2435.2.4.3.100.11.5.8	INTEGER {stationMode(1), accessPointMode(2)}	read-write	mandatory
wlAssociate OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.11.11
brpsWLanEncryptMode OBJECT-TYPE Wireless LAN encrypt mode.	1.3.6.1.4.1.2435.2.4.3.100.11.11.1	INTEGER {none(1), wep(2), tkip(3), aes(4)}	read-write	mandatory
brpsWLanAuthMode OBJECT-TYPE Wireless LAN authenticate mode.	1.3.6.1.4.1.2435.2.4.3.100.11.11.11	INTEGER {openSystem(1), sharedKey(2), wpa-psk(3), wpa-none(4), wpa(5), wpa2(6), leap(7), eapfast-none(8), eapfast-mschapv2(9), eapfast-gtc(10), eapfast-tls(11), wpa2-psk(12)}	read-write	mandatory
brpsWLanAuthEAP OBJECT-TYPE Wireless LAN authenticate EAP.	1.3.6.1.4.1.2435.2.4.3.100.11.11.12	INTEGER {eapMD5(1), eapTLS(2), eapTTLS(3), peap(4), leap(5), eapfast-none(6), eapfast-mschapv2(7), eapfast-gtc(8), eapfast-tls(9)}	read-write	mandatory
brpsWLanAuthUserID OBJECT-TYPE Wireless LAN authenticate user ID.	1.3.6.1.4.1.2435.2.4.3.100.11.11.13	OCTET STRING (SIZE(0..32))	read-write	mandatory
brpsWLanAuthUserPass OBJECT-TYPE Wireless LAN authenticate user password.	1.3.6.1.4.1.2435.2.4.3.100.11.11.14	OCTET STRING (SIZE(0..32))	read-write	mandatory
brpsWLanAssociate OBJECT-TYPE Wireless LAN associate.	1.3.6.1.4.1.2435.2.4.3.100.11.11.21	INTEGER {update(1), print(2), test(3), applyonly(4), simplewizard(5)}	read-write	mandatory
brpsWLanAssociateTestResult OBJECT-TYPE Wireless LAN associate test result. 0 indicates cleared.	1.3.6.1.4.1.2435.2.4.3.100.11.11.22	INTEGER {linkOK(1), noSuchWLan(2), invalidWLanNetKey(3), invalidAuthUserID(4), invalidAuthUserPass(5)}	read-only	mandatory
brpsWLanAssociateResult OBJECT-TYPE Wireless LAN associate result. 0 indicates cleared.	1.3.6.1.4.1.2435.2.4.3.100.11.11.23	INTEGER {linkOK(1), noSuchWLan(2), invalidWLanNetKey(3), invalidAuthUserID(4), invalidAuthUserPass(5)}	read-only	mandatory
brpsWLanAssociateTestSupported OBJECT-TYPE 0 indicates the Wireless network Associate Test function is not supported. 1 indicates the Wireless network Associate Test function is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.100.11.11.24	INTEGER	read-only	mandatory
wlWEP OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.11.11.101
brpsWLanWepKeyDefaultIndex OBJECT-TYPE The value of brpsWLanWepKeyIndex corresponding to the default setting.	1.3.6.1.4.1.2435.2.4.3.100.11.11.101.1	INTEGER	read-write	mandatory
brpsWLanWepKeyTable OBJECT-TYPE This table represents WEP KEY Info.	1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11		not-accessible	mandatory
brpsWLanWepKeyEntry OBJECT-TYPE A row in the brpsWLanWepKeyTable table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1		not-accessible	mandatory
brpsWLanWepKeyIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.1	INTEGER (1..4)	read-only	mandatory
brpsWLanWepKeySize OBJECT-TYPE The WEP KEY size.	1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.2	INTEGER {size40(1), size104(2)}	read-write	mandatory
brpsWLanWepKeyType OBJECT-TYPE The WEP KEY type.	1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.3	INTEGER {hex(1), ascii(2)}	read-write	mandatory
brpsWLanWepKey OBJECT-TYPE The WEP KEY.	1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.4	OCTET STRING	read-write	mandatory
wlWPA OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.11.11.102
brpsWLanNetworkKey OBJECT-TYPE The WPA-PSK.	1.3.6.1.4.1.2435.2.4.3.100.11.11.102.1	OCTET STRING	read-write	mandatory
wlTKIP OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.11.11.103
brpsWLanTKIPChangeInterval OBJECT-TYPE TKIP Interval (s)	1.3.6.1.4.1.2435.2.4.3.100.11.11.103.1	INTEGER	read-write	mandatory
wlLEAP OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.11.11.104
brpsWLanLEAPTimeout OBJECT-TYPE Leap timeout (s)	1.3.6.1.4.1.2435.2.4.3.100.11.11.104.1	INTEGER	read-write	mandatory
wlStatus OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.21
wlGeneralStatus OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.100.21.1
brpsWLanOperatingMode OBJECT-TYPE The mode which is actually operating. off(0), dot11a(1), dot11b(2), dot11g(3)	1.3.6.1.4.1.2435.2.4.3.100.21.1.1	INTEGER	read-only	mandatory
brpsWLanRSSLevel OBJECT-TYPE Wireless LAN RSS Level.	1.3.6.1.4.1.2435.2.4.3.100.21.1.2	INTEGER (0..5)	read-only	mandatory
brpsWLanCommSpeed OBJECT-TYPE Wireless LAN communication speed. However, the unit is 1/10.	1.3.6.1.4.1.2435.2.4.3.100.21.1.3	INTEGER (0..32767)	read-only	mandatory
brpsWLanOperatingChannel OBJECT-TYPE Wireless LAN operating channel.	1.3.6.1.4.1.2435.2.4.3.100.21.1.4	INTEGER	read-only	mandatory
brpsWLanOperatingName OBJECT-TYPE Wireless LAN operating SSID Name.	1.3.6.1.4.1.2435.2.4.3.100.21.1.5	OCTET STRING	read-only	mandatory
brpsWLanOperatingCommMode OBJECT-TYPE Wireless LAN operating communication mode. off(0), infrastructure(1), ad-Hoc-WiFi(2), ad-Hoc(3)	1.3.6.1.4.1.2435.2.4.3.100.21.1.6	INTEGER	read-only	mandatory
brpsWLanOperatingEncryptMode OBJECT-TYPE Wireless LAN operating encrypt mode. off(0), none(1), wep(2), tkip(3), aes(4), ckip(5)	1.3.6.1.4.1.2435.2.4.3.100.21.1.7	INTEGER	read-only	mandatory
brpsWLanOperatingAuthMode OBJECT-TYPE Wireless LAN operating authenticate mode. off(0), openSystem(1), sharedKey(2), wpa-psk(3), wpa-none(4), wpa(5), wpa2(6), leap(7), eapfast-none(8), eapfast-mschapv2(9), eapfast-gtc(10), eapfast-tls(11), wpa2-psk(12)	1.3.6.1.4.1.2435.2.4.3.100.21.1.8	INTEGER	read-only	mandatory
brpsWLanOperatingWepKeyDefaultIndex OBJECT-TYPE Wireless LAN operating WepKeyDefaultIndex.	1.3.6.1.4.1.2435.2.4.3.100.21.1.9	INTEGER	read-only	mandatory
brnetConfig OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240
brconfig OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.1
brpsNodeName OBJECT-TYPE The node name of this print server.	1.3.6.1.4.1.2435.2.4.3.1240.1.1	DisplayString (SIZE(0..32))	read-write	mandatory
brpsSerialNumber OBJECT-TYPE The serial number of this print server.	1.3.6.1.4.1.2435.2.4.3.1240.1.2	DisplayString (SIZE(0..32))	read-only	mandatory
brpsHardwareType OBJECT-TYPE Hardware type of the print server.	1.3.6.1.4.1.2435.2.4.3.1240.1.3	INTEGER (0..32767)	read-only	mandatory
brpsMainRevision OBJECT-TYPE Revision level of the Print Server firmware suitable for display. This object may be read but not written.	1.3.6.1.4.1.2435.2.4.3.1240.1.4	DisplayString (SIZE(0..5))	read-only	mandatory
brpsBootRevision OBJECT-TYPE Revision level of the boot firmware (if applicable) suitable for display. This object may be read but not written.	1.3.6.1.4.1.2435.2.4.3.1240.1.5	DisplayString (SIZE(0..5))	read-only	mandatory
brpsPasswordVerify OBJECT-TYPE Submit the print server's password for verification. An error will be returned if the password is incorrect.	1.3.6.1.4.1.2435.2.4.3.1240.1.6	DisplayString	read-write	mandatory
brpsPassword OBJECT-TYPE Set the print server's password value.	1.3.6.1.4.1.2435.2.4.3.1240.1.7	DisplayString	read-write	mandatory
brpsMIBVersion OBJECT-TYPE Revision level of the private MIB implemented by the device. For example: 1.0 This object may be read but not written.	1.3.6.1.4.1.2435.2.4.3.1240.1.8	DisplayString (SIZE(0..5))	read-only	mandatory
brpsOEMString OBJECT-TYPE OEM string setting for the print server. This object may be read but not written.	1.3.6.1.4.1.2435.2.4.3.1240.1.9	DisplayString (SIZE(3))	read-only	mandatory
brpsMIBMajor OBJECT-TYPE MIB major version number.	1.3.6.1.4.1.2435.2.4.3.1240.1.10	INTEGER (0..9)	read-only	mandatory
brpsMIBMinor OBJECT-TYPE MIB minor version number.	1.3.6.1.4.1.2435.2.4.3.1240.1.11	INTEGER (0..99)	read-only	mandatory
brpsServerDescription OBJECT-TYPE Product name of print server. For example: NC-3100h This object may be read but not written.	1.3.6.1.4.1.2435.2.4.3.1240.1.12	DisplayString (SIZE(0..32))	read-write	mandatory
brpsEnetMode OBJECT-TYPE Ethernet type.	1.3.6.1.4.1.2435.2.4.3.1240.1.13	INTEGER (0..4)	read-write	mandatory
brpsFlashROMSize OBJECT-TYPE Flash ROM Size of print server (MBytes).	1.3.6.1.4.1.2435.2.4.3.1240.1.14	INTEGER (0..255)	read-only	mandatory
brpsSNMPGetCommunity OBJECT-TYPE SNMP Get Community Name.	1.3.6.1.4.1.2435.2.4.3.1240.1.15	DisplayString (SIZE(0..32))	read-only	mandatory
brpsSNMPJetAdmin OBJECT-TYPE 0 indicates the JetAdmin compatibility mode is not enabled. 1 indicates JetAdmin compatibility mode is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.1.16	INTEGER (0..1)	read-only	mandatory
brpsSNMPSetCommunity1 OBJECT-TYPE SNMP Set Community Name #1.	1.3.6.1.4.1.2435.2.4.3.1240.1.17	DisplayString (SIZE(0..32))	read-only	mandatory
brpsSNMPSetCommunity2 OBJECT-TYPE SNMP Set Community Name #2.	1.3.6.1.4.1.2435.2.4.3.1240.1.18	DisplayString (SIZE(0..32))	read-only	mandatory
brSupportedInfo OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.1240.1.200	OCTET STRING (SIZE(0..255))	read-only	mandatory
brcontrol OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.2
brpsTestPage OBJECT-TYPE Setting any value generates a test page on all ports.	1.3.6.1.4.1.2435.2.4.3.1240.2.1	INTEGER (0..32767)	read-write	mandatory
brpsSetDefault OBJECT-TYPE Setting the value 5AA5h (23205) resets all parameters to their factory default value.	1.3.6.1.4.1.2435.2.4.3.1240.2.2	INTEGER (0..32767)	read-write	mandatory
brpsReset OBJECT-TYPE Setting the value 55AAh (21930) causes the print server to perform a soft reset.	1.3.6.1.4.1.2435.2.4.3.1240.2.3	INTEGER (0..32767)	read-write	mandatory
brpsProtectModeEnable OBJECT-TYPE 0 indicates the protect mode is not enabled. 1 indicates protect mode is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.2.4	INTEGER (0..1)	read-only	mandatory
brpsProtectPassword OBJECT-TYPE protect password.	1.3.6.1.4.1.2435.2.4.3.1240.2.5	DisplayString (SIZE(0..32))	read-only	mandatory
brport OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.3
brpsPortCount OBJECT-TYPE Number of ports on this print server.	1.3.6.1.4.1.2435.2.4.3.1240.3.1	INTEGER (0..32)	read-only	mandatory
brpsPortInfoTable OBJECT-TYPE This table represents the attributes of a port.	1.3.6.1.4.1.2435.2.4.3.1240.3.2		not-accessible	mandatory
brpsPortInfoEntry OBJECT-TYPE A row in the port table. Rows cannot be created or deleted via direct SNMP operations.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1		not-accessible	mandatory
brpsPortIndex OBJECT-TYPE The port number.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.1	INTEGER (1..255)	read-only	mandatory
brpsPortName OBJECT-TYPE The port name.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.2	DisplayString (SIZE(1..32))	read-write	mandatory
brpsPortType OBJECT-TYPE Type of port.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.3	INTEGER {parallel(1), serial(2)}	read-only	mandatory
brpsPortStatus OBJECT-TYPE The port status as a 32 bit integer.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.4	INTEGER (0..31)	read-only	mandatory
brpsPortStatusString OBJECT-TYPE The port status description. Reflects the printer's front panel display on internal print server interfaces.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.5	DisplayString (SIZE(1..32))	read-only	mandatory
brpsPortProtocol OBJECT-TYPE Protocol currently printing on this port.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.6	INTEGER (0..12)	read-only	mandatory
brpsPortQueueSize OBJECT-TYPE Number of protocols waiting to print on this port.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.7	INTEGER	read-only	mandatory
brpsPortDescriptionString OBJECT-TYPE The port description. Reflects the device ID of the printer connected to the port.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.8	DisplayString (SIZE(1..50))	read-only	mandatory
brpsPortInfoString OBJECT-TYPE The port status information. More information about the port status.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.9	DisplayString (SIZE(1..255))	read-only	mandatory
brpsPortHTTPExtensions OBJECT-TYPE 0 indicates the printer on this port does not support HTTP, 1 indicates that the printer does support HTTP.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.10	INTEGER (0..1)	read-only	mandatory
brpsPortSNMPExtensions OBJECT-TYPE 0 indicates the printer on this port does not support SNMP, 1 indicates that the printer does support SNMP.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.11	INTEGER (0..1)	read-only	mandatory
brpsPortAttribute OBJECT-TYPE Port attribute.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.12	DisplayString (SIZE(1..32))	read-write	mandatory
brpsPortBinaryMode OBJECT-TYPE Port binary mode.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.13	INTEGER (0..3)	read-write	mandatory
brpsPortInhibitDatagramSupport OBJECT-TYPE 0 indicates the inhibit datagram is not supported. 1 indicates the inhibit datagram is supported.	1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.14	INTEGER (0..1)	read-write	mandatory
brservice OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.4
brpsServiceCount OBJECT-TYPE Number of services on this print server.	1.3.6.1.4.1.2435.2.4.3.1240.4.1	INTEGER (0..128)	read-only	mandatory
brpsServiceInfoTable OBJECT-TYPE This table represents the attributes of a service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2		not-accessible	mandatory
brpsServiceInfoEntry OBJECT-TYPE A row in the services table. Rows cannot be created or deleted via direct SNMP operations.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1		not-accessible	mandatory
brpsServiceIndex OBJECT-TYPE The service number.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.1	INTEGER (1..32)	read-only	mandatory
brpsServiceName OBJECT-TYPE The service name.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.2	DisplayString (SIZE(1..32))	read-write	mandatory
brpsServicePort OBJECT-TYPE The port number assigned to this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.3	INTEGER (0..31)	read-write	mandatory
brpsServiceFilter OBJECT-TYPE Filter number assigned to this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.4	INTEGER (0..255)	read-write	mandatory
brpsServiceBOT OBJECT-TYPE Beginning of text string number assigned to this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.5	INTEGER (0..255)	read-write	mandatory
brpsServiceEOT OBJECT-TYPE End of text string number assigned to this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.6	INTEGER (0..255)	read-write	mandatory
brpsServiceMatch OBJECT-TYPE Match string number assigned to this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.7	INTEGER (0..255)	read-write	mandatory
brpsServiceReplace OBJECT-TYPE Replace string number assigned to this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.8	INTEGER (0..255)	read-write	mandatory
brpsServiceTCPPort OBJECT-TYPE TCP Port number assigned to this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.9	INTEGER (0..65535)	read-write	mandatory
brpsServiceNDSTree OBJECT-TYPE The NDS Tree.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.10	DisplayString (SIZE(1..48))	read-write	mandatory
brpsServiceNDSContext OBJECT-TYPE The NDS Context in Unicode.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.11	OCTET STRING (SIZE(0..255))	read-write	mandatory
brpsServiceVines OBJECT-TYPE The Vines StreetTalk name for this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.12	DisplayString (SIZE(1..48))	read-write	mandatory
brpsServiceObsolete OBJECT-TYPE Obsolete parameter that is no longer used	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.13	INTEGER (0..127)	read-write	mandatory
brpsServiceNetwareServerCount OBJECT-TYPE The number of Netware servers enabled on this service. Modifying the value will truncate the server list to the specified number of servers. If the value set is greater than the number of servers currently on the list, then the list will be unchanged.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.14	INTEGER (0..127)	read-write	mandatory
brpsServiceReceiveOnly OBJECT-TYPE When enabled, the service will only receive data, any printer responses will be discarded.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.15	INTEGER (0..1)	read-write	mandatory
brpsServiceTCPQueued OBJECT-TYPE When enabled, the raw TCP connections to the port will be queued while waiting for the port to become available	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.16	INTEGER (0..1)	read-write	mandatory
brpsServiceProtocolLAT OBJECT-TYPE When enabled, the LAT protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.17	INTEGER (0..1)	read-write	mandatory
brpsServiceProtocolTCPIP OBJECT-TYPE When enabled, the TCP/IP protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.18	INTEGER (0..1)	read-write	mandatory
brpsServiceProtocolNetware OBJECT-TYPE When enabled, the Netware protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.19	INTEGER (0..1)	read-write	mandatory
brpsServiceProtocolAppleTalk OBJECT-TYPE When enabled, the AppleTalk protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.20	INTEGER (0..1)	read-write	mandatory
brpsServiceProtocolBanyan OBJECT-TYPE When enabled, the Banyan protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.21	INTEGER (0..1)	read-write	mandatory
brpsServiceProtocolDLC OBJECT-TYPE When enabled, the DLC protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.22	INTEGER (0..1)	read-write	mandatory
brpsServiceProtocolNetBEUI OBJECT-TYPE When enabled, the NetBEUI protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.23	INTEGER (0..1)	read-write	mandatory
brpsServiceNetwareServerMode OBJECT-TYPE Netware mode for this service. 0 = Queue Server, 1 = Remote Printer	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.24	INTEGER (0..1)	read-write	mandatory
brpsServiceNetwareRemotePrinterNum OBJECT-TYPE Remote Printer Number for this service	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.25	INTEGER (0..255)	read-write	mandatory
brpsServiceProtocolIPP OBJECT-TYPE When enabled, the IPP protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.26	INTEGER (0..1)	read-write	mandatory
brpsServiceAppleTalkType OBJECT-TYPE AppleTalk type.	1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.27	DisplayString (SIZE(1..32))	read-write	mandatory
brpsServiceStringLimit OBJECT-TYPE Maximum number of service strings supported by the print server.	1.3.6.1.4.1.2435.2.4.3.1240.4.3	INTEGER (1..127)	read-only	mandatory
brpsServiceStringInfoTable OBJECT-TYPE This table represents the service BOT/EOT/MATCH/REPLACE strings defined.	1.3.6.1.4.1.2435.2.4.3.1240.4.4		not-accessible	mandatory
brpsServiceStringInfoEntry OBJECT-TYPE A row in the service string table. Rows cannot be created or deleted via direct SNMP operations.	1.3.6.1.4.1.2435.2.4.3.1240.4.4.1		not-accessible	mandatory
brpsServiceStringIndex OBJECT-TYPE The string number.	1.3.6.1.4.1.2435.2.4.3.1240.4.4.1.1	INTEGER (1..255)	read-only	mandatory
brpsServiceString OBJECT-TYPE The character string definition suitable for displaying.	1.3.6.1.4.1.2435.2.4.3.1240.4.4.1.2	DisplayString (SIZE(1..32))	read-write	mandatory
brpsServiceStringCount OBJECT-TYPE Number of service strings currently defined on the print server.	1.3.6.1.4.1.2435.2.4.3.1240.4.5	INTEGER	read-only	mandatory
brpsServiceFilterCount OBJECT-TYPE Number of service filters implemented by the device.	1.3.6.1.4.1.2435.2.4.3.1240.4.6	INTEGER	read-only	mandatory
brprotocol OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5
brlat OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5.1
brpsLATSupported OBJECT-TYPE 0 indicates the LAT protocol is not supported. 1 indicates LAT support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.1.1	INTEGER (0..1)	read-only	mandatory
brpsLATEnable OBJECT-TYPE 0 indicates the LAT protocol is not enabled. 1 indicates that the LAT protocol is enabled. Writing a non-zero value will enable the LAT protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.1.2	INTEGER (0..1)	read-write	mandatory
brpsLATCircuitTimer OBJECT-TYPE Minimum time (in milliseconds) between transmissions to the host. The default of 10 normally provides the best performance.	1.3.6.1.4.1.2435.2.4.3.1240.5.1.3	INTEGER (10..499)	read-write	mandatory
brpsLATKeepAliveTimer OBJECT-TYPE How often in seconds a packet is transmitted to keep a connection alive.	1.3.6.1.4.1.2435.2.4.3.1240.5.1.4	INTEGER (0..60000)	read-write	mandatory
brpsLATReceiveBufferMax OBJECT-TYPE LAT receive buffer max size.	1.3.6.1.4.1.2435.2.4.3.1240.5.1.5	INTEGER (0..5)	read-write	mandatory
brpsLATTransmitBufferMax OBJECT-TYPE LAT transmit buffer max size.	1.3.6.1.4.1.2435.2.4.3.1240.5.1.6	INTEGER (0..5)	read-write	mandatory
brpsLATTimeout OBJECT-TYPE LAT inactivity timeout (sec).	1.3.6.1.4.1.2435.2.4.3.1240.5.1.7	INTEGER (0..499)	read-write	mandatory
brpsLATGroup OBJECT-TYPE LAT group membership (mm-[nn]).	1.3.6.1.4.1.2435.2.4.3.1240.5.1.8	DisplayString (SIZE(1..7))	read-write	mandatory
brtcpip OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5.2
brpsTCPIPSupported OBJECT-TYPE 0 indicates the TCP/IP protocol is not supported. 1 indicates TCP/IP support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.2.1	INTEGER (0..1)	read-only	mandatory
brpsTCPIPEnable OBJECT-TYPE 0 indicates the TCP/IP protocol is not enabled. 1 indicates that the TCP/IP protocol is enabled. Writing a non-zero value will enable the TCP/IP protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.2	INTEGER (0..1)	read-write	mandatory
brpsTCPIPAddress OBJECT-TYPE IP Address assigned to the print server.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.3	IpAddress	read-write	mandatory
brpsTCPIPSubnetMask OBJECT-TYPE Subnet mask assigned to the print server.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.4	IpAddress	read-write	mandatory
brpsTCPIPGateway OBJECT-TYPE Gateway/Router address assigned to the print server.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.5	IpAddress	read-write	mandatory
brpsTCPIPMethod OBJECT-TYPE Method used to determine the IP Address. AUTO tries all protocols. STATIC uses the configured address. DHCP, BOOTP, and RARP use only that protocol.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.6	INTEGER (0..7)	read-write	mandatory
brpsTCPIPTimeout OBJECT-TYPE Timeout used for LPD connections.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.7	INTEGER (0..32767)	read-write	mandatory
brpsTCPIPBootTries OBJECT-TYPE Number of attempts to use BOOTP, RARP, and DHCP.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.8	INTEGER (0..32767)	read-write	mandatory
brpsTCPIPMaxWindow OBJECT-TYPE Maximum window size for TCP connections. Due to resource limitations setting the window to values greater than 10240 is not recommended.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.9	INTEGER (1500..65535)	read-write	mandatory
brpsTCPIPRARPNoSubnet OBJECT-TYPE If enabled, do not set the subnet mask based on the RARP response.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.10	INTEGER (0..1)	read-write	mandatory
brpsTCPIPRARPNoGateway OBJECT-TYPE If enabled, do not set the gateway/router address based on the RARP response.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.11	INTEGER (0..1)	read-write	mandatory
brpsTCPIPUpdate OBJECT-TYPE Hardware MAC address to be updated. This value is write only. Will read back as zeros.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.12	OCTET STRING (SIZE(6))	read-write	mandatory
brpsTCPIPBanner OBJECT-TYPE 0 indicates the LPR banner print is not enabled. 1 indicates that the LPR banner print is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.13	INTEGER (0..1)	read-write	mandatory
brpsTCPIPFastTimeoutEnable OBJECT-TYPE 0 indicates the fast timeout is not enabled. 1 indicates that the fast timeout is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.14	INTEGER (0..1)	read-write	mandatory
brpsTCPIPLPRRetryEnable OBJECT-TYPE 0 indicates the LPR print retry is not enabled. 1 indicates that the LPR print retry is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.15	INTEGER (0..1)	read-write	mandatory
brpsTCPIPUseMethod OBJECT-TYPE Method type that used set up TCP/IP configuration.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.16	INTEGER (0..7)	read-write	mandatory
brpsTCPIPMethodServer OBJECT-TYPE If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.17	IpAddress	read-write	mandatory
brpsTCPIPAccessTable OBJECT-TYPE This table represents the list of IP address of node that has parmittion for access.Up to 16 Netware addresses can be enabled.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.18		not-accessible	mandatory
brpsTCPIPAccessEntry OBJECT-TYPE A row in the TCP/IP access table. Rows cannot be created or deleted via direct SNMP operations.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1		not-accessible	mandatory
brpsTCPIPAccessIndex OBJECT-TYPE The TCP/IP access table's index.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.1	INTEGER (1..16)	read-only	mandatory
brpsTCPIPAccessNodeAddress OBJECT-TYPE IP address of node that has parmittion for access.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.2	IpAddress	read-write	mandatory
brpsTCPIPAccessSubnetMask OBJECT-TYPE Subnet mask of node that has parmittion for access.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.3	IpAddress	read-write	mandatory
brpsAdvancedTCPIPAccessSupported OBJECT-TYPE 0 indicates the Advanced TCP/IP Access is not supported. 1 indicates Advanced TCP/IP Access support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.2.19	INTEGER (0..1)	read-only	mandatory
brpsAdvancedTCPIPAccessEnable OBJECT-TYPE 0 indicates the Advanced TCP/IP Access is not enabled. 1 indicates that the Advanced TCP/IP Access is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.20	INTEGER (0..1)	read-write	mandatory
brpsAdvancedTCPIPAccessAdministratorIPAddress OBJECT-TYPE Administrator IPAddress.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.21	IpAddress	read-write	mandatory
brpsAdvancedTCPIPAccessSetting OBJECT-TYPE 0 indicates the Advanced TCP/IP Access is reject. 1 indicates that the Advanced TCP/IP Access is Accept.	1.3.6.1.4.1.2435.2.4.3.1240.5.2.22	INTEGER (0..1)	read-write	mandatory
brnetware OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5.3
brpsNetwareSupported OBJECT-TYPE 0 indicates the Netware protocol is not supported. 1 indicates Netware support is implemented by the firmware. 2 indicates that Netware NEST NDS support is implemented by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.1	INTEGER (0..2)	read-only	mandatory
brpsNetwareEnable OBJECT-TYPE 0 indicates the Netware protocol is not enabled. 1 indicates that the Netware protocol is enabled. Writing a non-zero value will enable the Netware protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.2	INTEGER (0..1)	read-write	mandatory
brpsNetwareFrameType OBJECT-TYPE The frame type to be used as follows: 0 = Automatic, 1 = Ethernet 802.3, 2 = Ethernet II, 3 = Ethernet 802.2, 4 = Ethernet SNAP.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.3	INTEGER (0..4)	read-write	mandatory
brpsNetwarePollFreq OBJECT-TYPE File server polling frequency in seconds.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.4	INTEGER (2..60)	read-write	mandatory
brpsNetwareAdvFreq OBJECT-TYPE Print server advertising frequency in seconds.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.5	INTEGER (0..210)	read-write	mandatory
brpsNetwarePassword OBJECT-TYPE The Netware login password.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.6	DisplayString (SIZE(0..32))	read-write	mandatory
brpsNetwareRestart OBJECT-TYPE Setting any value will restart the Netware protocol.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.7	INTEGER (0..1)	read-write	mandatory
brpsNetwareServerTable OBJECT-TYPE This table represents the list of enabled Netware servers. Up to 16 Netware servers can be enabled. If the service is configured for remote printer mode, then only the first enabled server is used and it should specify a print server.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.8		not-accessible	mandatory
brpsNetwareServerEntry OBJECT-TYPE A row in the Netware server table. Rows cannot be created or deleted via direct SNMP operations.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1		not-accessible	mandatory
brpsNetwareServerIndex OBJECT-TYPE The Netware server number.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1.1	INTEGER (1..16)	read-only	mandatory
brpsNetwareServerName OBJECT-TYPE The Netware server name. Specifies a print server if the service is in remote printer mode, or a file server if the service is in queue server mode	1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1.2	DisplayString (SIZE(1..48))	read-write	mandatory
brpsNetwarePasswordSet OBJECT-TYPE Returns 1 if the Netware login password is set, 0 if not set.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.9	INTEGER (0..1)	read-only	mandatory
brpsNDSSupported OBJECT-TYPE 0 indicates NDS is not supported. 1 indicates NDS is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.3.10	INTEGER (0..1)	read-only	mandatory
brpsNetwareEtherIINetInfo OBJECT-TYPE Ethernet II network information.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.11	DisplayString (SIZE(0..255))	read-only	mandatory
brpsNetwareEtherIICount OBJECT-TYPE Ethernet II network counter	1.3.6.1.4.1.2435.2.4.3.1240.5.3.12	INTEGER (0..65535)	read-only	mandatory
brpsNetware8022NetInfo OBJECT-TYPE IEEE 802.2 network information.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.13	DisplayString (SIZE(0..255))	read-only	mandatory
brpsNetware8022Count OBJECT-TYPE IEEE 802.2 network counter.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.14	INTEGER (0..65535)	read-only	mandatory
brpsNetware8023NetInfo OBJECT-TYPE IEEE 802.3 network information.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.15	DisplayString (SIZE(0..255))	read-only	mandatory
brpsNetware8023Count OBJECT-TYPE IEEE 802.3 network information.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.16	INTEGER (0..65535)	read-only	mandatory
brpsNetwareSNAPNetInfo OBJECT-TYPE SNAP network information.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.17	DisplayString (SIZE(0..255))	read-only	mandatory
brpsNetwareSNAPCount OBJECT-TYPE SNAP network count.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.18	INTEGER (0..65535)	read-only	mandatory
brpsNetwareServicingServerName OBJECT-TYPE Netware server name.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.19	DisplayString (SIZE(1..48))	read-only	mandatory
brpsNetwareServicingQueueName OBJECT-TYPE Netware queue name.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.20	DisplayString (SIZE(1..48))	read-only	mandatory
brpsNetwareServicingServerCount OBJECT-TYPE Number of netware servers.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.21	INTEGER (0..255)	read-only	mandatory
brpsNetwareServicingQueueCount OBJECT-TYPE Number of netware queues.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.22	INTEGER (0..255)	read-only	mandatory
brpsNetwarePrintJob OBJECT-TYPE Number of netware print job.	1.3.6.1.4.1.2435.2.4.3.1240.5.3.23	INTEGER (0..65535)	read-only	mandatory
brappletalk OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5.4
brpsAppleTalkSupported OBJECT-TYPE 0 indicates the AppleTalk protocol is not supported. 1 indicates AppleTalk support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.4.1	INTEGER (0..1)	read-only	mandatory
brpsAppleTalkEnable OBJECT-TYPE 0 indicates the AppleTalk protocol is not enabled. 1 indicates that the AppleTalk protocol is enabled. Writing a non-zero value will enable the AppleTalk protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.4.2	INTEGER (0..1)	read-write	mandatory
brpsAppleTalkZone OBJECT-TYPE The AppleTalk zone the print server belongs to.	1.3.6.1.4.1.2435.2.4.3.1240.5.4.3	DisplayString	read-write	mandatory
brpsAppleTalkPrintJob OBJECT-TYPE Counter of AppleTalk print job.	1.3.6.1.4.1.2435.2.4.3.1240.5.4.4	INTEGER (0..65535)	read-only	mandatory
brpsAppleTalkReadByte OBJECT-TYPE Counter of read bytes.	1.3.6.1.4.1.2435.2.4.3.1240.5.4.5	INTEGER (0..65535)	read-only	mandatory
brpsAppleTalkWriteByte OBJECT-TYPE Counter of write bytes.	1.3.6.1.4.1.2435.2.4.3.1240.5.4.6	INTEGER (0..65535)	read-only	mandatory
brpsAppleTalkReadError OBJECT-TYPE Counter of read error.	1.3.6.1.4.1.2435.2.4.3.1240.5.4.7	INTEGER (0..65535)	read-only	mandatory
brpsAppleTalkWriteError OBJECT-TYPE Counter of write error.	1.3.6.1.4.1.2435.2.4.3.1240.5.4.8	INTEGER (0..65535)	read-only	mandatory
brbanyan OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5.5
brpsBanyanSupported OBJECT-TYPE 0 indicates the Banyan protocol is not supported. 1 indicates Banyan support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.5.1	INTEGER (0..1)	read-only	mandatory
brpsBanyanEnable OBJECT-TYPE 0 indicates the Banyan protocol is not enabled. 1 indicates that the Banyan protocol is enabled. Writing a non-zero value will enable the Banyan protocol if is is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.2	INTEGER (0..1)	read-write	mandatory
brpsBanyanLoginName OBJECT-TYPE The Banyan login name.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.3	DisplayString (SIZE(0..32))	read-write	mandatory
brpsBanyanPassword OBJECT-TYPE The Banyan login password.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.4	DisplayString (SIZE(0..16))	read-write	mandatory
brpsBanyanHopCount OBJECT-TYPE Number of hops between the print server and the Banyan file server.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.5	INTEGER (0..32767)	read-write	mandatory
brpsBanyanTimeout OBJECT-TYPE Timeout in seconds for a Banyan print job.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.6	INTEGER (0..32767)	read-write	mandatory
brpsBanyanPasswordSet OBJECT-TYPE Returns 1 if the Banyan login password is set, 0 if not set.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.7	INTEGER (0..1)	read-only	mandatory
brpsBanyanIPNetworkID1 OBJECT-TYPE IP Network ID.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.8	OCTET STRING (SIZE(8))	read-only	mandatory
brpsBanyanIPNetworkID2 OBJECT-TYPE IP Network ID.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.9	OCTET STRING (SIZE(4))	read-only	mandatory
brpsBanyanRouter1 OBJECT-TYPE Router ID.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.10	OCTET STRING (SIZE(8))	read-only	mandatory
brpsBanyanRouter2 OBJECT-TYPE Router ID.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.11	OCTET STRING (SIZE(4))	read-only	mandatory
brpsBanyanIPPacket OBJECT-TYPE Counter of IP Packet.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.12	INTEGER (0..65535)	read-only	mandatory
brpsBanyanErrorCS OBJECT-TYPE Counter of CS error.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.13	INTEGER (0..65535)	read-only	mandatory
brpsBanyanErrorPT OBJECT-TYPE Counter of PT error.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.14	INTEGER (0..65535)	read-only	mandatory
brpsBanyanErrorLE OBJECT-TYPE Counter of LE error.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.15	INTEGER (0..65535)	read-only	mandatory
brpsBanyanPrintServerStatus OBJECT-TYPE Banyan print server status.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.16	DisplayString (SIZE(0..255))	read-only	mandatory
brpsBanyanServerAddress1 OBJECT-TYPE Banyan server address.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.17	OCTET STRING (SIZE(8))	read-only	mandatory
brpsBanyanServerAddress2 OBJECT-TYPE Banyan server address.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.18	OCTET STRING (SIZE(4))	read-only	mandatory
brpsBanyanIPCConnectionInformation OBJECT-TYPE IPC connection information.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.19	DisplayString (SIZE(0..255))	read-only	mandatory
brpsBanyanIPCSequenceError OBJECT-TYPE IPC sequence error.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.20	INTEGER (0..65535)	read-only	mandatory
brpsBanyanIPCListen OBJECT-TYPE IPC listen.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.21	DisplayString (SIZE(0..255))	read-only	mandatory
brpsBanyanSPPConnectionInformation OBJECT-TYPE SPP connection information.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.22	DisplayString (SIZE(0..255))	read-only	mandatory
brpsBanyanSPPSequenceError OBJECT-TYPE SPP sequence error.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.23	INTEGER (0..65535)	read-only	mandatory
brpsBanyanSPPListen OBJECT-TYPE SPP listen.	1.3.6.1.4.1.2435.2.4.3.1240.5.5.24	DisplayString (SIZE(0..255))	read-only	mandatory
bremail OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5.6
brpsEmailSupported OBJECT-TYPE 0 indicates the POP3/SMTP email protocols are not supported. 1 indicates email support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.6.1	INTEGER (0..1)	read-only	mandatory
brpsEmailEnable OBJECT-TYPE 0 indicates the POP3/SMTP email protocols are not enabled. 1 indicates that the email protocols are enabled. Writing a non-zero value will enable the email protocols if they are supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.2	INTEGER (0..1)	read-write	mandatory
brpsPOP3Address OBJECT-TYPE The IP Address of the POP3 server.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.3	IpAddress	read-write	mandatory
brpsSMTPAddress OBJECT-TYPE The IP Address of the SMTP server.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.4	IpAddress	read-write	mandatory
brpsPOP3Name OBJECT-TYPE The POP3 mailbox name.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.5	DisplayString	read-write	mandatory
brpsPOP3Password OBJECT-TYPE The POP3 mailbox password.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.6	DisplayString	read-write	mandatory
brpsPOP3PollFreq OBJECT-TYPE The POP3 polling frequency in seconds.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.7	INTEGER (10..32767)	read-write	mandatory
brpsPOP3Timeout OBJECT-TYPE The POP3 timeout in minutes.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.8	INTEGER (10..32767)	read-write	mandatory
brpsPOP3PasswordSet OBJECT-TYPE Returns 1 if the POP3 password is set, 0 if not set.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.9	INTEGER (0..1)	read-only	mandatory
brpsPOP3TotalMessage OBJECT-TYPE Counter of POP3 message.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.10	INTEGER (0..65535)	read-only	mandatory
brpsPOP3TotalConnect OBJECT-TYPE Counter of POP3 connect.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.11	INTEGER (0..65535)	read-only	mandatory
brpsPOP3TotalConnectFailure OBJECT-TYPE Counter of POP3 connect error.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.12	INTEGER (0..65535)	read-only	mandatory
brpsPOP3TotalConnectionLost OBJECT-TYPE Counter of POP3 connection lost.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.13	INTEGER (0..65535)	read-only	mandatory
brpsPOP3TotalUserFailure OBJECT-TYPE Counter of POP3 user error.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.14	INTEGER (0..65535)	read-only	mandatory
brpsPOP3TotalPasswordFailure OBJECT-TYPE Counter of POP3 pass error.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.15	INTEGER (0..65535)	read-only	mandatory
brpsPOP3TotalIOError OBJECT-TYPE Counter of POP3 I/O error.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.16	INTEGER (0..65535)	read-only	mandatory
brpsSMTPTotalMessage OBJECT-TYPE Counter of SMTP message.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.17	INTEGER (0..65535)	read-only	mandatory
brpsSMTPTotalConnect OBJECT-TYPE Counter of SMTP connect.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.18	INTEGER (0..65535)	read-only	mandatory
brpsSMTPTotalConnectFailure OBJECT-TYPE Counter of SMTP connect error.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.19	INTEGER (0..65535)	read-only	mandatory
brpsSMTPTotalRecvFromFailure OBJECT-TYPE Counter of SMTP recvfrom error.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.20	INTEGER (0..65535)	read-only	mandatory
brpsSMTPTotalSendToFailure OBJECT-TYPE Counter of SMTP recvfrom error.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.21	INTEGER (0..65535)	read-only	mandatory
brpsPOP3Supported OBJECT-TYPE 0 indicates the POP3 protocol is not supported. 1 indicates the POP3 protocol is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.6.101	INTEGER (0..1)	read-only	mandatory
brpsSMTPServerAuthMethod OBJECT-TYPE 0 indicates the user is not authenticated to the SMTP Server. 1 indicates the user is authenticated to the SMTP Server using SMTP-AUTH. 2 indicates the user is authenticated to the SMTP Server using POP before SMTP.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.102	INTEGER (0..2)	read-write	mandatory
brpsSMTPAUTHUsername OBJECT-TYPE The username of SMTP server's account.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.103	OCTET STRING (SIZE(0..60))	read-write	mandatory
brpsSMTPAUTHPassword OBJECT-TYPE The password of SMTP server's account.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.104	OCTET STRING (SIZE(0..32))	read-write	mandatory
brpsSMTPAUTHPasswordSet OBJECT-TYPE Returns 1 if the SMTP server login password is set, 0 if not set.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.105	INTEGER (0..1)	read-only	mandatory
brpsSmtpAUTHTimeout OBJECT-TYPE The SMTP-AUTH timeout in seconds.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.106	INTEGER (10..32767)	read-write	mandatory
brpsPOPbeforeSMTPWait OBJECT-TYPE The wait time in mili seconds between POP logging in and SMTP sending.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.107	INTEGER (0..32767)	read-write	mandatory
brpsAPOPEnable OBJECT-TYPE 0 indicates the APOP is not enabled. 1 indicates the APOP is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.108	INTEGER (0..1)	read-write	mandatory
brpsSMTPEnhancedAuthSupported OBJECT-TYPE Bit0 indicates 'no authentication'. Bit1 indicates 'SMTP-AUTH'. Bit2 indicates 'POP before SMTP'.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.150	INTEGER (0..7)	read-only	mandatory
brpsAPOPSupported OBJECT-TYPE 0 indicates the APOP is not supported. 1 indicates the APOP is supported.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.151	INTEGER (0..1)	read-only	mandatory
brpsEmailSendTestSupported OBJECT-TYPE 0 indicates the Email Sending Test is not supported. 1 indicates the Email Sending Test is supported.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.152	INTEGER (0..1)	read-only	mandatory
brpsEmailRecvTestSupported OBJECT-TYPE 0 indicates the Email Receiving Test is not supported. 1 indicates the Email Receiving Test is supported.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.153	INTEGER (0..1)	read-only	mandatory
brpsChangeSMTPPortSupported OBJECT-TYPE 0 indicates to change the SMTP port number is not supported. 1 indicates to change the SMTP port number is supported.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.154	INTEGER (0..1)	read-only	mandatory
brpsSMTPPortNumber OBJECT-TYPE The port number of connection to SMTP server.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.155	INTEGER (1..65535)	read-write	mandatory
brpsChangePOP3PortSupported OBJECT-TYPE 0 indicates to change the POP3 port number is not supported. 1 indicates to change the POP3 port number is supported.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.156	INTEGER (0..1)	read-only	mandatory
brpsPOP3PortNumber OBJECT-TYPE The port number of connection to POP3 server.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.157	INTEGER (1..65535)	read-write	mandatory
brpsTmpSMTPServerName OBJECT-TYPE Temporary Setting for Email Sending Test. The FQDN name of the SMTP server.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.170	OCTET STRING (SIZE(0..64))	read-write	mandatory
brpsTmpSMTPServerAuthMethod OBJECT-TYPE Temporary Setting for Email Sending Test. 0 indicates the user is not authenticated to the SMTP Server. 1 indicates the user is authenticated to the SMTP Server using SMTP-AUTH. 2 indicates the user is authenticated to the SMTP Server using POP before SMTP.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.171	INTEGER (0..2)	read-write	mandatory
brpsTmpSMTPAUTHUsername OBJECT-TYPE Temporary Setting for Email Sending Test. The username of SMTP server's account.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.172	OCTET STRING (SIZE(0..60))	read-write	mandatory
brpsTmpSMTPAUTHPassword OBJECT-TYPE Temporary Setting for Email Sending Test. The password of SMTP server's account.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.173	OCTET STRING (SIZE(0..32))	read-write	mandatory
brpsTmpPOP3ServerName OBJECT-TYPE Temporary Setting for Email Sending/Receiving Test. The FQDN name of the POP3 server.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.174	OCTET STRING (SIZE(0..64))	read-write	mandatory
brpsTmpPOP3Name OBJECT-TYPE Temporary Setting for Email Sending/Receiving Test. The POP3 mailbox name.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.175	DisplayString	read-write	mandatory
brpsTmpPOP3Password OBJECT-TYPE Temporary Setting for Email Sending/Receiving Test. The POP3 mailbox password.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.176	DisplayString	read-write	mandatory
brpsTmpPrintersEmailaddress OBJECT-TYPE Temporary Setting for Email Sending Test. The Printers Email Address	1.3.6.1.4.1.2435.2.4.3.1240.5.6.177	OCTET STRING	read-write	mandatory
brpsTmpAPOPEnable OBJECT-TYPE Temporary Setting for Email Sending/Receiving Test. 0 indicates the APOP is not enabled. 1 indicates the APOP is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.178	INTEGER (0..1)	read-write	mandatory
brpsTmpSMTPAUTHPasswordModified OBJECT-TYPE 0 indicates the SMTP server password is not modified. 1 indicates the SMTP server password is modified.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.179	INTEGER (0..1)	read-write	mandatory
brpsTmpPOP3PasswordModified OBJECT-TYPE 0 indicates the POP3 server password is not modified. 1 indicates the POP3 server password is modified.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.180	INTEGER (0..1)	read-write	mandatory
brpsTmpSMTPPortNumber OBJECT-TYPE Temporary Setting for Email Sending Test. The port number of connection to SMTP server.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.181	INTEGER (1..65535)	read-write	mandatory
brpsTmpPOP3PortNumber OBJECT-TYPE Temporary Setting for Email Sending/Receiving Test. The port number of connection to POP3 server.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.182	INTEGER (1..65535)	read-write	mandatory
brpsEmailSendTestMail OBJECT-TYPE 0 indicates the testmail is not sended at Email Sending Test. 1 indicates the testmail is sended at Email Sending Test.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.200	INTEGER (0..1)	read-write	mandatory
brpsEmailTestDestinationAddress OBJECT-TYPE The destination Email Address of Email Sending Test.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.201	DisplayString (SIZE(0..80))	read-write	mandatory
brpsEmailSendTestCall OBJECT-TYPE 0 indicates the Email Sending Test is not called on. ('READY') 1 indicates the Email Sending Test is called on. ('START') 2 indicates the Email Sending Test is canceled. ('CANCEL')	1.3.6.1.4.1.2435.2.4.3.1240.5.6.210	INTEGER (0..2)	read-write	mandatory
brpsEmailRecvTestCall OBJECT-TYPE 0 indicates the Email Receiving Test is not called on. ('READY') 1 indicates the Email Receiving Test is called. ('START') 2 indicates the Email Receiving Test is canceled. ('CANCEL')	1.3.6.1.4.1.2435.2.4.3.1240.5.6.211	INTEGER (0..2)	read-write	mandatory
brpsEmailSendRecvTestCall OBJECT-TYPE 0 indicates the Email Sending and Receiving Test is not called on. ('READY') 1 indicates the Email Sending and Receiving Test is called. ('START') 2 indicates the Email Sending and Receiving Test is canceled. ('CANCEL')	1.3.6.1.4.1.2435.2.4.3.1240.5.6.212	INTEGER (0..2)	read-write	mandatory
brpsEmailTestResult OBJECT-TYPE This Value is divided into 15-8bit and 7-0bit. 15-8bit indicates Email Sending Test's Result. 7-0bit indicates Email Receiving Test's Result. (However, the value from 0x00 to 0x04 is only set to 7-0bit.) 0x00 indicates the Email Test is not running. 0x01 indicates the Email Test is running. ('BUSY') 0x02 indicates the Email Test is canceled.('CANCELED') 0x03 indicates the Email Test is Locked by another Email Test process.(LOCKED) 0x04 indicates the Email Test is not executed. -- unused 0x10 indicates the Status 'Fatal Error is occurred during Email Testing'. 0x20 indicates the Status 'Invalid value is set in SMTP Server Address'. 0x21 indicates the Status 'Invalid value is set in SMTP-AUTH Account Name'. 0x22 indicates the Status 'Invalid value is set in SMTP-AUTH Password'. 0x30 indicates the Status 'Invalid value is set in POP3 Server Address'. 0x31 indicates the Status 'Invalid value is set in POP3 Account Name'. 0x32 indicates the Status 'Invalid value is set in POP3 Account Password'. 0x40 indicates the Status 'Invalid value is set in POP3 Printer E-mail Address'. 0x41 indicates the Status 'Invalid value is set in Destination E-mail Address'. 0x50 indicates the Status 'Sending OK'. 0x51 indicates the Status 'Cannot locate SMTP server'. 0x52 indicates the Status 'Cannot connect to SMTP server'. 0x53 indicates the Status 'Cannot authenticate with SMTP server by using method'. 0x54 indicates the Status 'Authentication failure in SMTP server'. 0x55 indicates the Status 'Email Sending Timeout' -- unused 0x60 indicates the Status 'Receiving OK'. 0x61 indicates the Status 'Cannot locate POP3 server'. 0x62 indicates the Status 'Cannot connect to POP3 server'. 0x63 indicates the Status 'Authentication failure in POP3 server'. 0x64 indicates the Status 'Cannot authenticate with POP3 server by using method'. 0x65 indicates the Status 'Email Receiving Timeout' -- unused 0x66 indicates the Email Test is Locked by another Email process. 0x70 indicates the Status 'Cannot resolve the host name (DNS Error)'.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.220	INTEGER (0..65535)	read-write	mandatory
brpsPOP3TotalAPOPFailure OBJECT-TYPE Counter of POP3 APOP error.	1.3.6.1.4.1.2435.2.4.3.1240.5.6.221	INTEGER (0..65535)	read-only	mandatory
brdlc OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5.7
brpsDLCSupported OBJECT-TYPE 0 indicates the DLC protocol is not supported. 1 indicates DLC support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.7.1	INTEGER (0..1)	read-only	mandatory
brpsDLCEnable OBJECT-TYPE 0 indicates the DLC protocol is not enabled. 1 indicates that the DLC protocol is enabled. Writing a non-zero value will enable the DLC protocol if is is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.7.2	INTEGER (0..1)	read-write	mandatory
brpsDLCPrintStatus OBJECT-TYPE DLC print status.	1.3.6.1.4.1.2435.2.4.3.1240.5.7.3	DisplayString (SIZE(0..32))	read-only	mandatory
brpsDLCLLCState OBJECT-TYPE LLC status.	1.3.6.1.4.1.2435.2.4.3.1240.5.7.4	INTEGER (0..65535)	read-only	mandatory
brpsDLCLLCConnectHost OBJECT-TYPE LLC connected host name.	1.3.6.1.4.1.2435.2.4.3.1240.5.7.5	DisplayString (SIZE(0..32))	read-only	mandatory
brpsDLCLLCLastIFrame OBJECT-TYPE LLC last valid I-frame.	1.3.6.1.4.1.2435.2.4.3.1240.5.7.6	INTEGER (0..65535)	read-only	mandatory
brpsDLCLLCRecvPacket OBJECT-TYPE Counter of LLC receive packets.	1.3.6.1.4.1.2435.2.4.3.1240.5.7.7	INTEGER (0..65535)	read-only	mandatory
brpsDLCLLCPortStatus OBJECT-TYPE Port status.	1.3.6.1.4.1.2435.2.4.3.1240.5.7.8	DisplayString (SIZE(0..32))	read-only	mandatory
brnetbeui OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5.8
brpsNetBEUISupported OBJECT-TYPE 0 indicates the NetBEUI protocol is not supported. 1 indicates NetBEUI support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.8.1	INTEGER (0..1)	read-only	mandatory
brpsNetBEUIEnable OBJECT-TYPE 0 indicates the NetBEUI protocol is not enabled. 1 indicates that the NetBEUI protocol is enabled. Writing a non-zero value will enable the NetBEUI protocol if is is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.8.2	INTEGER (0..1)	read-write	mandatory
brpsNetBEUIDomain OBJECT-TYPE The NetBEUI domain name.	1.3.6.1.4.1.2435.2.4.3.1240.5.8.3	DisplayString (SIZE(0..15))	read-write	mandatory
brpsNetBIOSIPSupported OBJECT-TYPE 0 indicates the NetBIOS IP protocol is not supported. 1 indicates NetBIOS IP support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.8.4	INTEGER (0..1)	read-only	mandatory
brpsNetBIOSIPEnable OBJECT-TYPE 0 indicates the NetBIOS IP protocol is not enabled. 1 indicates that the NetBIOS IP protocol is enabled. Writing a non-zero value will enable the NetBIOS IP protocol if is is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.8.5	INTEGER (0..1)	read-write	mandatory
brpsNetBIOSIPMethod OBJECT-TYPE Method used to determine the IP Address of the WINS server. AUTO tries all protocols (currently only DHCP is tried). STATIC uses the configured address.	1.3.6.1.4.1.2435.2.4.3.1240.5.8.6	INTEGER (0..1)	read-write	mandatory
brpsNetBIOSPrimaryWINSAddr OBJECT-TYPE The IP Address of the primary WINS server.	1.3.6.1.4.1.2435.2.4.3.1240.5.8.7	IpAddress	read-write	mandatory
brpsNetBIOSSecondaryWINSAddr OBJECT-TYPE The IP Address of the secondary WINS server.	1.3.6.1.4.1.2435.2.4.3.1240.5.8.8	IpAddress	read-write	mandatory
brpsNetBIOSPrintingSupported OBJECT-TYPE 0 indicates the NetBIOS IP protocol printing is not supported. 1 indicates the NetBIOS IP protocol printing is supported.	1.3.6.1.4.1.2435.2.4.3.1240.5.8.101	INTEGER (0..1)	read-only	mandatory
bripp OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5.9
brpsIPPSupported OBJECT-TYPE 0 indicates the IPP protocol is not supported. 1 indicates IPP support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.9.1	INTEGER (0..1)	read-only	mandatory
brpsIPPEnable OBJECT-TYPE 0 indicates the IPP protocol is not enabled. 1 indicates that the IPP protocol is enabled. Writing a non-zero value will enable the IPP protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.9.2	INTEGER (0..1)	read-write	mandatory
brIPPRegularPortEnable OBJECT-TYPE 0 indicates that the IPP regular port is not enabled. 1 indicates that the IPP regular port is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.5.9.3	INTEGER (0..1)	read-write	mandatory
brIPPSSLPortEnable OBJECT-TYPE 0 indicates that the IPP SSL port is not enabled. 1 indicates that the IPP SSL port is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.5.9.4	INTEGER (0..1)	read-write	mandatory
brIPPOriginalPortEnable OBJECT-TYPE 0 indicates that the IPP original port is not enableed. 1 indicates that the IPP original port is enabled.	1.3.6.1.4.1.2435.2.4.3.1240.5.9.5	INTEGER (0..1)	read-write	mandatory
brntsend OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.5.10
brpsNtSendSupported OBJECT-TYPE 0 indicates the NtSend protocol is not supported. 1 indicates NtSend support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.5.10.1	INTEGER (0..1)	read-only	mandatory
brpsNtSendEnable OBJECT-TYPE 0 indicates the NtSend protocol is not enabled. 1 indicates that the NtSend protocol is enabled. Writing a non-zero value will enable the NtSend protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.5.10.2	INTEGER (0..1)	read-write	mandatory
brfirmware OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.1240.6
brpsFirmwareIPAddress OBJECT-TYPE The IP address of the host from which to TFTP GET the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.6.1	IpAddress	read-write	mandatory
brpsFirmwareHost OBJECT-TYPE The Netware server name from which to fetch the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.6.2	DisplayString	read-write	mandatory
brpsFirmwareFile OBJECT-TYPE The firmware file to be reloaded.	1.3.6.1.4.1.2435.2.4.3.1240.6.3	DisplayString	read-write	mandatory
brpsFirmwareReload OBJECT-TYPE Setting a value of 0x5A will cause the print server to begin attempts to reload the firmware within 5 seconds. Further attempts to read or modify the configuration are not recommended until after the firmware has been reloaded.	1.3.6.1.4.1.2435.2.4.3.1240.6.4	INTEGER (0..1)	read-write	mandatory
brpsFirmwareDescription OBJECT-TYPE Firmware version and date.	1.3.6.1.4.1.2435.2.4.3.1240.6.5	DisplayString	read-only	mandatory
brpsFirmwareXModem OBJECT-TYPE Set 1 execute XMODEM mode.	1.3.6.1.4.1.2435.2.4.3.1240.6.6	INTEGER (0..1)	read-write	mandatory
brpsFirmwareAdvancedAddressSupported OBJECT-TYPE 0 indicates the Firmware Advanced Address is not supported. 1 indicates Firmware Advanced Address support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.1240.6.7	INTEGER (0..1)	read-only	mandatory
brpsFirmwareAdvancedAddress OBJECT-TYPE The address of the host from which to TFTP GET the firmware.	1.3.6.1.4.1.2435.2.4.3.1240.6.8	DisplayString (SIZE(0..64))	read-write	mandatory
brnetConfigOpt OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435
broriginalprotocol OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5
broriginaltcpip OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.2
brLPDType OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.2435.5.2.1	INTEGER (0..3)	read-write	mandatory
broriginalftp OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.10
brFTPSupported OBJECT-TYPE 0 indicates the FTP protocol is not supported. 1 indicates FTP support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.10.1	INTEGER (0..1)	read-only	mandatory
brFTPEnable OBJECT-TYPE 0 indicates the FTP protocol is not enabled. 1 indicates that the FTP protocol is enabled. Writing a non-zero value will enable the FTP protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.10.2	INTEGER (0..1)	read-write	mandatory
broriginalupnp OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.11
brUPnPSupported OBJECT-TYPE 0 indicates the UPnP protocol is not supported. 1 indicates UPnP support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.11.1	INTEGER (0..1)	read-only	mandatory
brUPnPEnable OBJECT-TYPE 0 indicates the UPnP protocol is not enabled. 1 indicates that the UPnP protocol is enabled. Writing a non-zero value will enable the UPnP protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.11.2	INTEGER (0..1)	read-write	mandatory
broriginalapipa OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.12
brAPIPASupported OBJECT-TYPE 0 indicates the APIPA protocol is not supported. 1 indicates APIPA support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.12.1	INTEGER (0..1)	read-only	mandatory
brAPIPAEnable OBJECT-TYPE 0 indicates the APIPA protocol is not enabled. 1 indicates that the APIPA protocol is enabled. Writing a non-zero value will enable the APIPA protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.12.2	INTEGER (0..1)	read-write	mandatory
broriginalmdns OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.13
brmDNSSupported OBJECT-TYPE 0 indicates the mDNS protocol is not supported. 1 indicates mDNS support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.13.1	INTEGER (0..1)	read-only	mandatory
brmDNSEnable OBJECT-TYPE 0 indicates the mDNS protocol is not enabled. 1 indicates that the mDNS protocol is enabled. Writing a non-zero value will enable the mDNS protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.13.2	INTEGER (0..1)	read-write	mandatory
brmDNSPrinterName OBJECT-TYPE mDNS Service Name	1.3.6.1.4.1.2435.2.4.3.2435.5.13.3	DisplayString (SIZE(0..64))	read-write	mandatory
broriginalLAA OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.14
brLAASupported OBJECT-TYPE This value indicate if the locally administered addressing is supported. 0: Not Supported 1: Supported	1.3.6.1.4.1.2435.2.4.3.2435.5.14.1	INTEGER (0..1)	read-only	mandatory
brLAAMacAddress OBJECT-TYPE A locally administered address (LAA) that replaces the factory-assigned MAC address (UAA: universally administered address). If this setting is all-zero address (i.e. 6 bytes of zeros), the factory-assigned MAC address is used as the MAC address of the device. The LAA address must start with X2, X6, XA, or XE, where X is any hexadecimal digit 0 to F.	1.3.6.1.4.1.2435.2.4.3.2435.5.14.2	OCTET STRING (SIZE(6))	read-write	mandatory
broriginalIPv6 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.15
brIPv6Supported OBJECT-TYPE 0 indicates the IPv6 protocol is not supported. 1 indicates IPv6 support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.15.1	INTEGER (0..1)	read-only	mandatory
brIPv6Enable OBJECT-TYPE 0 indicates the IPv6 protocol is not enabled. 1 indicates that the IPv6 protocol is enabled. Writing a non-zero value will enable the IPv6 protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.15.2	INTEGER (0..1)	read-write	mandatory
brIPv6Priority OBJECT-TYPE 0 indicates the IPv6 protocol is low priority. 1 indicates that the IPv6 protocol is high priority.	1.3.6.1.4.1.2435.2.4.3.2435.5.15.3	INTEGER (0..1)	read-write	mandatory
broriginaltelnet OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.16
brtelnetSupported OBJECT-TYPE 0 indicates the telnet protocol is not supported. 1 indicates telnet support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.16.1	INTEGER (0..1)	read-only	mandatory
brtelnetEnable OBJECT-TYPE 0 indicates the telnet protocol is not enabled. 1 indicates that the telnet protocol is enabled. Writing a non-zero value will enable the telnet protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.16.2	INTEGER (0..1)	read-write	mandatory
broriginalEWS OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.17
brEWSSupported OBJECT-TYPE 0 indicates the EWS protocol is not supported. 1 indicates EWS support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.17.1	INTEGER (0..1)	read-only	mandatory
brEWSEnable OBJECT-TYPE 0 indicates the EWS protocol is not enabled. 1 indicates that the EWS protocol is enabled. Writing a non-zero value will enable the EWS protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.17.2	INTEGER (0..1)	read-write	mandatory
brEWSRegularPortEnable OBJECT-TYPE 0 indicates that the EWS regular port is not enabled. 1 indicates that the EWS regular port is enabled.	1.3.6.1.4.1.2435.2.4.3.2435.5.17.3	INTEGER (0..1)	read-write	mandatory
brEWSSSLPortEnable OBJECT-TYPE 0 indicates that the EWS SSL port is not enabled. 1 indicates that the EWS SSL port is enabled.	1.3.6.1.4.1.2435.2.4.3.2435.5.17.4	INTEGER (0..1)	read-write	mandatory
broriginalSNMP OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.18
brSNMPSupported OBJECT-TYPE 0 indicates the SNMP protocol is not supported. 1 indicates SNMP support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.18.1	INTEGER (0..1)	read-only	mandatory
brSNMPEnable OBJECT-TYPE 0 indicates the SNMP protocol is not enabled. 1 indicates that the SNMP protocol is enabled. Writing a non-zero value will enable the SNMP protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.18.2	INTEGER (0..1)	read-write	mandatory
brSNMPV3Supported OBJECT-TYPE 0 indicates SNMPv3 is not supported. 1 indicates SNMPv3 is supported.	1.3.6.1.4.1.2435.2.4.3.2435.5.18.10	INTEGER (0..1)	read-only	mandatory
brSNMPCommMode OBJECT-TYPE 1 indicates v1/v2c read-write access is enable. 2 indicates v3 read-write access is enable. 3 indicates v1/v2c read-only access and v3 read-write access is enable.	1.3.6.1.4.1.2435.2.4.3.2435.5.18.11	INTEGER (1..3)	read-write	mandatory
brSNMPV3UserName OBJECT-TYPE The username of SNMPv3.	1.3.6.1.4.1.2435.2.4.3.2435.5.18.12	DisplayString (SIZE(1..32))	read-write	mandatory
brSNMPV3KeyType OBJECT-TYPE 1 indicates that the key type of SNMPv3 is ASCII. 2 indicates that the key type of SNMPv3 is HEX	1.3.6.1.4.1.2435.2.4.3.2435.5.18.13	INTEGER (1..2)	read-write	mandatory
brSNMPV3AuthKey OBJECT-TYPE The authentication key of SNMPv3.	1.3.6.1.4.1.2435.2.4.3.2435.5.18.14	OCTET STRING (SIZE(0..16))	read-write	mandatory
brSNMPV3AuthPassword OBJECT-TYPE The authentication password of SNMPv3.	1.3.6.1.4.1.2435.2.4.3.2435.5.18.15	DisplayString (SIZE(1..16))	read-write	mandatory
brSNMPV3PrivKey OBJECT-TYPE The privacy key of SNMPv3.	1.3.6.1.4.1.2435.2.4.3.2435.5.18.16	OCTET STRING (SIZE(0..16))	read-write	mandatory
brSNMPV3PrivPassword OBJECT-TYPE The privacy password of SNMPv3.	1.3.6.1.4.1.2435.2.4.3.2435.5.18.17	DisplayString (SIZE(1..16))	read-write	mandatory
brSNMPV3ContextName OBJECT-TYPE The contextname of SNMPv3.	1.3.6.1.4.1.2435.2.4.3.2435.5.18.18	DisplayString (SIZE(0..32))	read-write	mandatory
broriginalldap OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.19
brLdapSupported OBJECT-TYPE 0 indicates the LDAP client is not supported. 1 indicates the LDAP client is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.19.1	INTEGER (0..1)	read-only	mandatory
brLdapEnable OBJECT-TYPE 0 indicates the LDAP client is not enabled. 1 indicates that the LDAP client is enabled. Writing a non-zero value will enable the Ldap if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.2	INTEGER (0..1)	read-write	mandatory
brLdapTimeout OBJECT-TYPE timeout value (sec) for LDAP server.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.3	INTEGER (1..32767)	read-write	mandatory
brLdapTimeoutSupported OBJECT-TYPE 0 indicates the LDAP timeout is not supported. 1 indicates the LDAP timeout is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.19.4	INTEGER (0..1)	read-only	mandatory
brLdapServerCount OBJECT-TYPE Maximum number of LDAP Server INDEX.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.11	INTEGER	read-only	mandatory
brLdapServerInfoTable OBJECT-TYPE This table represents LDAP Server Info.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12		not-accessible	mandatory
brLdapServerInfoEntry OBJECT-TYPE A row in the LdapServerInfo table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1		not-accessible	mandatory
brLdapServerInfoIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.1	INTEGER (0..1)	read-only	mandatory
brLdapServerName OBJECT-TYPE The LDAP server name.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.2	DisplayString (SIZE(0..64))	read-write	mandatory
brLdapServerPort OBJECT-TYPE The LDAP server port number.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.3	INTEGER (0..65535)	read-write	mandatory
brLdapServerAuth OBJECT-TYPE The LDAP server authentication method.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.4	INTEGER {anonymous(1), simple(2), kerberos(3)}	read-write	mandatory
brLdapServerUserDN OBJECT-TYPE The LDAP server user DN.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.5	OCTET STRING (SIZE(0..255))	read-write	mandatory
brLdapServerPassword OBJECT-TYPE The LDAP server password.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.6	OCTET STRING (SIZE(0..32))	read-write	mandatory
brLdapServerPasswordSet OBJECT-TYPE Returns 1 if the LDAP server password is set, 0 if not set.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.7	INTEGER (0..1)	read-only	mandatory
brLdapServerBaseDN OBJECT-TYPE The LDAP server base DN.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.8	OCTET STRING (SIZE(0..255))	read-write	mandatory
brLdapServerAttrEMail OBJECT-TYPE The LDAP server attribute or e-mail.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.10	DisplayString (SIZE(0..64))	read-write	mandatory
brLdapServerAttrFAXNumber OBJECT-TYPE The LDAP server attribute or facsimile telephone number.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.11	DisplayString (SIZE(0..64))	read-write	mandatory
brLdapServerAttrDetail1 OBJECT-TYPE The LDAP server attribute or detail 1.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.12	DisplayString (SIZE(0..64))	read-write	mandatory
brLdapServerAttrDetail2 OBJECT-TYPE The LDAP server attribute or detail 2.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.13	DisplayString (SIZE(0..64))	read-write	mandatory
brLdapServerAttrDetail3 OBJECT-TYPE The LDAP server attribute or detail 3.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.14	DisplayString (SIZE(0..64))	read-write	mandatory
brLdapServerAttrDetail4 OBJECT-TYPE The LDAP server attribute or detail 4.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.15	DisplayString (SIZE(0..64))	read-write	mandatory
brLdapServerAttrDetailEnable1 OBJECT-TYPE Enable flag of the LDAP server attribute of detail 1.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.16	INTEGER (0..1)	read-write	mandatory
brLdapServerAttrDetailEnable2 OBJECT-TYPE Enable flag of the LDAP server attribute of detail 2.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.17	INTEGER (0..1)	read-write	mandatory
brLdapServerAttrDetailEnable3 OBJECT-TYPE Enable flag of the LDAP server attribute of detail 3.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.18	INTEGER (0..1)	read-write	mandatory
brLdapServerAttrDetailEnable4 OBJECT-TYPE Enable flag of the LDAP server attribute of detail 4.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.19	INTEGER (0..1)	read-write	mandatory
brLdapKerberosServerName OBJECT-TYPE The Kerberos server name for LDAP.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.20	DisplayString (SIZE(0..64))	read-write	mandatory
brLdapKerberosServerPort OBJECT-TYPE The Kerberos server port number for LDAP.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.21	INTEGER (0..65535)	read-write	mandatory
brLdapServerAttrNameCount OBJECT-TYPE Maximum number of LDAP Server Attribute of name INDEX.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.21	INTEGER	read-only	mandatory
brLdapServerAttrNameTable OBJECT-TYPE This table represents LDAP Server Attribute of name.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.22		not-accessible	mandatory
brLdapServerAttrNameEntry OBJECT-TYPE A row in the LdapServerAttributeName table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1		not-accessible	mandatory
brLdapServerAttrNameIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1.1	INTEGER (0..4)	read-only	mandatory
brLdapServerAttrName OBJECT-TYPE The LDAP server attribute of name.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1.2	DisplayString (SIZE(0..64))	read-write	mandatory
brLdapSetDefault OBJECT-TYPE Setting the value resets all LDAP parameters to their factory default value.	1.3.6.1.4.1.2435.2.4.3.2435.5.19.99	INTEGER (0..32767)	read-write	mandatory
broriginalTFTP OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.20
brTFTPSupported OBJECT-TYPE 0 indicates the TFTP protocol is not supported. 1 indicates TFTP support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.20.1	INTEGER (0..1)	read-only	mandatory
brTFTPEnable OBJECT-TYPE 0 indicates the TFTP protocol is not enabled. 1 indicates that the TFTP protocol is enabled. Writing a non-zero value will enable the TFTP protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.20.2	INTEGER (0..1)	read-write	mandatory
broriginalHTTPS OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.21
brHTTPSSupported OBJECT-TYPE 0 indicates the HTTPS/IPPS protocol is not supported. 1 indicates HTTPS/IPPS support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.21.1	INTEGER (0..1)	read-only	mandatory
brHTTPSEnable OBJECT-TYPE 0 indicates the HTTPS/IPPS protocol is not enabled. 1 indicates that the HTTPS/IPPS protocol is enabled. Writing a non-zero value will enable the HTTPS/IPPS protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.21.2	INTEGER (0..1)	read-write	mandatory
broriginalLPD OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.22
brLPDSupported OBJECT-TYPE 0 indicates the LPD protocol is not supported. 1 indicates LPD support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.22.1	INTEGER (0..1)	read-only	mandatory
brLPDEnable OBJECT-TYPE 0 indicates the LPD protocol is not enabled. 1 indicates that the LPD protocol is enabled. Writing a non-zero value will enable the LPD protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.22.2	INTEGER (0..1)	read-write	mandatory
broriginalRawPort OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.23
brRawPortSupported OBJECT-TYPE 0 indicates the RawPort protocol is not supported. 1 indicates RawPort support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.23.1	INTEGER (0..1)	read-only	mandatory
brRawPortEnable OBJECT-TYPE 0 indicates the RawPort protocol is not enabled. 1 indicates that the RawPort protocol is enabled. Writing a non-zero value will enable the RawPort protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.23.2	INTEGER (0..1)	read-write	mandatory
broriginalLLTD OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.24
brLLTDSupported OBJECT-TYPE 0 indicates the LLTD protocol is not supported. 1 indicates LLTD support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.24.1	INTEGER (0..1)	read-only	mandatory
brLLTDEnable OBJECT-TYPE 0 indicates the LLTD protocol is not enabled. 1 indicates that the LLTD protocol is enabled. Writing a non-zero value will enable the LLTD protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.24.2	INTEGER (0..1)	read-write	mandatory
broriginalWebServices OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.25
brWebServicesSupported OBJECT-TYPE 0 indicates the WebServices protocol is not supported. 1 indicates WebServices support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.25.1	INTEGER (0..1)	read-only	mandatory
brWebServicesEnable OBJECT-TYPE 0 indicates the WebServices protocol is not enabled. 1 indicates that the WebServices protocol is enabled. Writing a non-zero value will enable the WebServices protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.25.2	INTEGER (0..1)	read-write	mandatory
brWebServicesRegularPortEnable OBJECT-TYPE 0 indicates that the WebServices regular port is not enabled. 1 indicates that the WebServices regular port is enabled.	1.3.6.1.4.1.2435.2.4.3.2435.5.25.3	INTEGER (0..1)	read-write	mandatory
brWebServicesSSLPortEnable OBJECT-TYPE 0 indicates that the WebServices SSL port is not enabled. 1 indicates that the WebServices SSL port is enabled.	1.3.6.1.4.1.2435.2.4.3.2435.5.25.4	INTEGER (0..1)	read-write	mandatory
broriginalLLMNR OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.26
brLLMNREnable OBJECT-TYPE 0 indicates the LLMNR protocol is not enabled. 1 indicates that the LLMNR protocol is enabled.	1.3.6.1.4.1.2435.2.4.3.2435.5.26.1	INTEGER (0..1)	read-write	mandatory
broriginalKerberos OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.27
brKerberosSupported OBJECT-TYPE 0 indicates the Kerberos protocol is not supported. 1 indicates Kerberos support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.27.1	INTEGER (0..1)	read-only	mandatory
broriginalCIFS OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.28
brCIFSSupported OBJECT-TYPE 0 indicates the CIFS protocol is not supported. 1 indicates CIFS support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.5.28.1	INTEGER (0..1)	read-only	mandatory
brCIFSEnable OBJECT-TYPE 0 indicates the CIFS protocol is not enabled. 1 indicates that the CIFS protocol is enabled. Writing a non-zero value will enable the CIFS protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.5.28.2	INTEGER (0..1)	read-write	mandatory
broriginalSNTP OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.29
brSNTPCSupported OBJECT-TYPE 0 indicates the SNTP is not supported. 1 indicates SNTP is supported.	1.3.6.1.4.1.2435.2.4.3.2435.5.29.1	INTEGER (0..1)	read-only	mandatory
brSNTPCEnable OBJECT-TYPE 0 indicates the SNTP is not disabled. 1 indicates that the SNTP is enabled.	1.3.6.1.4.1.2435.2.4.3.2435.5.29.2	INTEGER (0..1)	read-write	mandatory
brSNTPCServerMethod OBJECT-TYPE 1 indicates SNTP Server Method is AUTO. 2 indicates SNTP Server Method is STATIC. 3 indicates SNTP Server Method is PRESET.	1.3.6.1.4.1.2435.2.4.3.2435.5.29.3	INTEGER (1..3)	read-write	mandatory
brSNTPCSyncMethod OBJECT-TYPE 1 indicates Synchronous Method is AUTO. 2 indicates Synchronous Method is STATIC.	1.3.6.1.4.1.2435.2.4.3.2435.5.29.4	INTEGER (1..2)	read-write	mandatory
brSNTPCIntervalMin OBJECT-TYPE The minimum value of synchronous interval.	1.3.6.1.4.1.2435.2.4.3.2435.5.29.5	INTEGER (1..168)	read-write	mandatory
brSNTPCInterval OBJECT-TYPE The synchronous interval is used for synchronous method INTERVAL.	1.3.6.1.4.1.2435.2.4.3.2435.5.29.6	INTEGER (1..168)	read-write	mandatory
brSNTPCSyncResult OBJECT-TYPE The result of the last checking time. 1: Success 2: Synchronizing 3: Failed 4: Not yet checking	1.3.6.1.4.1.2435.2.4.3.2435.5.29.7	INTEGER (1..4)	read-only	mandatory
brSNTPCPrimaryServerName OBJECT-TYPE The primary server name of SNTP.	1.3.6.1.4.1.2435.2.4.3.2435.5.29.8	DisplayString (SIZE(0..64))	read-write	mandatory
brSNTPCPrimaryServerPort OBJECT-TYPE The port number of primary SNTP server.	1.3.6.1.4.1.2435.2.4.3.2435.5.29.9	INTEGER (1..65535)	read-write	mandatory
brSNTPCSecondaryServerName OBJECT-TYPE The secondary server name of SNTP.	1.3.6.1.4.1.2435.2.4.3.2435.5.29.10	DisplayString (SIZE(0..64))	read-write	mandatory
brSNTPCSecondaryServerPort OBJECT-TYPE The port number of secondary SNTP server.	1.3.6.1.4.1.2435.2.4.3.2435.5.29.11	INTEGER (1..65535)	read-write	mandatory
broriginalSecurity OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.100
brSecurityGeneralStatus OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.100.1
brDeviceNegotiationEncryptVer OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.2435.5.100.1.1	INTEGER (0..1)	read-only	mandatory
brpsServerCertificateNum OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.2435.5.100.1.2	INTEGER	read-only	mandatory
brSecurityGeneralSetup OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.100.2
brSecurityDeviceNegotiation OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.5.100.10
brDeviceNegotiationGetChallenge OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.1	OCTET STRING (SIZE(20))	read-only	mandatory
brDeviceNegotiationConfirmPassword OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.2	OCTET STRING (SIZE(60))	read-write	mandatory
brDeviceNegotiationChangePassword OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.3	OCTET STRING (SIZE(48))	read-write	mandatory
broriginalinternetsetting OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.10
broriginalproxy OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.10.1
brProxySupported OBJECT-TYPE 0 indicates the Proxy is not supported. 1 indicates Proxy is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.10.1.1	INTEGER (0..1)	read-only	mandatory
brProxyEnable OBJECT-TYPE 0 indicates the Proxy is not enabled. 1 indicates that the Proxy is enabled. Writing a non-zero value will enable the Proxy if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.3.2435.10.1.2	INTEGER (0..1)	read-write	mandatory
brProxyBypassServer OBJECT-TYPE on(2) indicates the bypass proxy server for local addresses.	1.3.6.1.4.1.2435.2.4.3.2435.10.1.3	INTEGER {off(1), on(2)}	read-write	mandatory
brProxyServerCount OBJECT-TYPE Maximum number of Proxy Server INDEX.	1.3.6.1.4.1.2435.2.4.3.2435.10.1.11	INTEGER	read-only	mandatory
brProxyServerInfoTable OBJECT-TYPE This table represents Proxy Server Info.	1.3.6.1.4.1.2435.2.4.3.2435.10.1.12		not-accessible	mandatory
brProxyServerInfoEntry OBJECT-TYPE A row in the ProxyServerInfo table. Rows cannot be created or deleted.	1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1		not-accessible	mandatory
brProxyServerInfoIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.1	INTEGER (1..16)	read-only	mandatory
brProxyServerType OBJECT-TYPE The Proxy server ID.	1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.2	INTEGER {http(1), secure(2), ftp(3), gopher(4), socks(5)}	read-write	mandatory
brProxyServerName OBJECT-TYPE The Proxy server name.	1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.3	OCTET STRING (SIZE(0..80))	read-write	mandatory
brProxyServerPort OBJECT-TYPE The Proxy server port number.	1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.4	INTEGER (0..65535)	read-write	mandatory
broriginalOtherSetting OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.20
broriginalJobTermination OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.20.1
brJobTerminationSupported OBJECT-TYPE 0 indicates the Job termination setting is not supported. 1 indicates the Job termination setting is implemented by the firmware	1.3.6.1.4.1.2435.2.4.3.2435.20.1.1	INTEGER (0..1)	read-only	mandatory
brJobTerminationEnable OBJECT-TYPE 0 indicates the Job termination setting is not enabled. 1 indicates the Job termination setting is enabled.	1.3.6.1.4.1.2435.2.4.3.2435.20.1.2	INTEGER (0..1)	read-write	mandatory
broriginalSNMPTrap OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.20.2
brSNMPTrapTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.2435.20.2.1		not-accessible	mandatory
brSNMPTrapEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1		not-accessible	mandatory
brSNMPTrapIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1.1	INTEGER (1..16)	read-only	mandatory
brTCPIPServerAddress OBJECT-TYPE The Destination IP Address for SNMP Trap.	1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1.2	IpAddress	read-write	mandatory
broriginalLegacy OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.3.2435.20.3
brLegacyCompatible OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.3.2435.20.3.1	INTEGER	read-write	mandatory
npMultiCards OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4
npMultiIFSet OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.99
brMultiIFdns OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.99.1
brMultiIFDNSTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.99.1.1		not-accessible	mandatory
brMultiIFDNSEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.99.1.1.1		not-accessible	mandatory
brMultiIFTCPIPDNSIPSetup OBJECT-TYPE DNS mode 1:static 2:auto	1.3.6.1.4.1.2435.2.4.4.99.1.1.1.1	INTEGER {static(1), auto(2)}	read-write	mandatory
brMultiIFPrimaryDNSIPAddress OBJECT-TYPE Primary DNS IP Address	1.3.6.1.4.1.2435.2.4.4.99.1.1.1.2	IpAddress	read-write	mandatory
brMultiIFSecondaryDNSIPAddress OBJECT-TYPE Secondary DNS IP Address	1.3.6.1.4.1.2435.2.4.4.99.1.1.1.3	IpAddress	read-write	mandatory
brMultiIFTCPIPConnectTime OBJECT-TYPE TCP/IP connect time.	1.3.6.1.4.1.2435.2.4.4.99.1.1.1.4	INTEGER	read-write	mandatory
brnetMultiIFConfig OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240
brMultiIFconfig OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240.1
brMultiIFSupported OBJECT-TYPE 0 indicates the Multi Interface is not supported. 1 indicates Multi Interface is supported.	1.3.6.1.4.1.2435.2.4.4.1240.1.1	INTEGER (0..1)	read-only	mandatory
brMultiIFActiveIF OBJECT-TYPE 1 LAN 2 Wireless LAN 3 Both	1.3.6.1.4.1.2435.2.4.4.1240.1.2	INTEGER {lan(1), wirelesslan(2), both(3)}	read-only	mandatory
brMultiIFAllSetDefault OBJECT-TYPE Setting the value resets all parameters to their factory default value.	1.3.6.1.4.1.2435.2.4.4.1240.1.3	INTEGER (0..32767)	read-write	mandatory
brMultiIFCount OBJECT-TYPE MultiIF Count	1.3.6.1.4.1.2435.2.4.4.1240.1.4	INTEGER	read-only	mandatory
brMultiIFConfigureTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.1.5		not-accessible	mandatory
brMultiIFConfigureEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.1.5.1		not-accessible	mandatory
brMultiIFConfigureIndex OBJECT-TYPE The number.	1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.1	INTEGER (1..4)	read-only	mandatory
brMultiIFType OBJECT-TYPE Interface Type	1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.2	INTEGER {lan(1), wirelesslan(2)}	read-only	mandatory
brMultiIFDescription OBJECT-TYPE Interface Description	1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.3	DisplayString (SIZE(0..64))	read-only	mandatory
brMultiIFNodeName OBJECT-TYPE An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.	1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.4	OCTET STRING	read-write	mandatory
brMultiIFInterfaceEnable OBJECT-TYPE 0 indicates the Interfase is not enabled. 1 indicates the Interfase is enabled.	1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.5	INTEGER (0..1)	read-write	mandatory
brMultiIFEnetMode OBJECT-TYPE Ethernet type.	1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.6	INTEGER (0..4)	read-write	mandatory
brMultiIFHardwareType OBJECT-TYPE Hardware type of the print server.	1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.7	INTEGER (0..32767)	read-only	mandatory
brMultiIFNodeType OBJECT-TYPE A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.	1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.8	OCTET STRING	read-only	mandatory
brMultiIFInterfaceEnableImmediate OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.9	INTEGER (0..1)	read-write	mandatory
brMultiIFPrimaryInterface OBJECT-TYPE Primary Interface	1.3.6.1.4.1.2435.2.4.4.1240.1.6	INTEGER	read-write	mandatory
brMultiIFInterfaceInformation OBJECT-TYPE 0bit Auto 1bit manual 2bit enable both 3bit disable both	1.3.6.1.4.1.2435.2.4.4.1240.1.7	INTEGER	read-only	mandatory
brMultiIFcontrol OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240.2
brMultiIFControlTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.2.1		not-accessible	mandatory
brMultiIFControlEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.2.1.1		not-accessible	mandatory
brMultiIFSetDefault OBJECT-TYPE Setting the value resets all parameters to their factory default value.	1.3.6.1.4.1.2435.2.4.4.1240.2.1.1.1	INTEGER (0..32767)	read-write	mandatory
brMultiIFservice OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240.4
brMultiIFServiceTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.4.1		not-accessible	mandatory
brMultiIFServiceEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.4.1.1		not-accessible	mandatory
brMultiIFServiceCount OBJECT-TYPE Number of services on this print server.	1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.1	INTEGER (0..128)	read-only	mandatory
brMultiIFServiceStringLimit OBJECT-TYPE Maximum number of service strings supported by the print server.	1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.2	INTEGER (1..127)	read-only	mandatory
brMultiIFServiceStringCount OBJECT-TYPE Number of service strings currently defined on the print server.	1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.3	INTEGER	read-only	mandatory
brMultiIFServiceFilterCount OBJECT-TYPE Number of service filters implemented by the device.	1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.4	INTEGER	read-only	mandatory
brMultiIFServiceInfoTable OBJECT-TYPE This table represents the attributes of a service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2		not-accessible	mandatory
brMultiIFServiceInfoEntry OBJECT-TYPE A row in the services table. Rows cannot be created or deleted via direct SNMP operations.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1		not-accessible	mandatory
brMultiIFServiceIndex OBJECT-TYPE The service number.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.1	INTEGER (1..32)	read-only	mandatory
brMultiIFServiceName OBJECT-TYPE The service name.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.2	DisplayString (SIZE(1..32))	read-write	mandatory
brMultiIFServicePort OBJECT-TYPE The port number assigned to this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.3	INTEGER (0..31)	read-write	mandatory
brMultiIFServiceFilter OBJECT-TYPE Filter number assigned to this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.4	INTEGER (0..255)	read-write	mandatory
brMultiIFServiceBOT OBJECT-TYPE Beginning of text string number assigned to this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.5	INTEGER (0..255)	read-write	mandatory
brMultiIFServiceEOT OBJECT-TYPE End of text string number assigned to this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.6	INTEGER (0..255)	read-write	mandatory
brMultiIFServiceMatch OBJECT-TYPE Match string number assigned to this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.7	INTEGER (0..255)	read-write	mandatory
brMultiIFServiceReplace OBJECT-TYPE Replace string number assigned to this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.8	INTEGER (0..255)	read-write	mandatory
brMultiIFServiceTCPPort OBJECT-TYPE TCP Port number assigned to this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.9	INTEGER (0..65535)	read-write	mandatory
brMultiIFServiceNDSTree OBJECT-TYPE The NDS Tree.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.10	DisplayString (SIZE(1..48))	read-write	mandatory
brMultiIFServiceNDSContext OBJECT-TYPE The NDS Context in Unicode.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.11	OCTET STRING (SIZE(0..255))	read-write	mandatory
brMultiIFServiceVines OBJECT-TYPE The Vines StreetTalk name for this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.12	DisplayString (SIZE(1..48))	read-write	mandatory
brMultiIFServiceObsolete OBJECT-TYPE Obsolete parameter that is no longer used	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.13	INTEGER (0..127)	read-write	mandatory
brMultiIFServiceNetwareServerCount OBJECT-TYPE The number of Netware servers enabled on this service. Modifying the value will truncate the server list to the specified number of servers. If the value set is greater than the number of servers currently on the list, then the list will be unchanged.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.14	INTEGER (0..127)	read-write	mandatory
brMultiIFServiceReceiveOnly OBJECT-TYPE When enabled, the service will only receive data, any printer responses will be discarded.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.15	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceTCPQueued OBJECT-TYPE When enabled, the raw TCP connections to the port will be queued while waiting for the port to become available	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.16	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceProtocolLAT OBJECT-TYPE When enabled, the LAT protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.17	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceProtocolTCPIP OBJECT-TYPE When enabled, the TCP/IP protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.18	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceProtocolNetware OBJECT-TYPE When enabled, the Netware protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.19	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceProtocolAppleTalk OBJECT-TYPE When enabled, the AppleTalk protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.20	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceProtocolBanyan OBJECT-TYPE When enabled, the Banyan protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.21	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceProtocolDLC OBJECT-TYPE When enabled, the DLC protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.22	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceProtocolNetBEUI OBJECT-TYPE When enabled, the NetBEUI protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.23	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceNetwareServerMode OBJECT-TYPE Netware mode for this service. 0 = Queue Server, 1 = Remote Printer	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.24	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceNetwareRemotePrinterNum OBJECT-TYPE Remote Printer Number for this service	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.25	INTEGER (0..255)	read-write	mandatory
brMultiIFServiceProtocolIPP OBJECT-TYPE When enabled, the IPP protocol will be available on this service.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.26	INTEGER (0..1)	read-write	mandatory
brMultiIFServiceAppleTalkType OBJECT-TYPE AppleTalk type.	1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.27	DisplayString (SIZE(1..32))	read-write	mandatory
brMultiIFServiceStringInfoTable OBJECT-TYPE This table represents the service BOT/EOT/MATCH/REPLACE strings defined.	1.3.6.1.4.1.2435.2.4.4.1240.4.3		not-accessible	mandatory
brMultiIFServiceStringInfoEntry OBJECT-TYPE A row in the service string table. Rows cannot be created or deleted via direct SNMP operations.	1.3.6.1.4.1.2435.2.4.4.1240.4.3.1		not-accessible	mandatory
brMultiIFServiceStringIndex OBJECT-TYPE The string number.	1.3.6.1.4.1.2435.2.4.4.1240.4.3.1.1	INTEGER (1..255)	read-only	mandatory
brMultiIFServiceString OBJECT-TYPE The character string definition suitable for displaying.	1.3.6.1.4.1.2435.2.4.4.1240.4.3.1.2	DisplayString (SIZE(1..32))	read-write	mandatory
brMultiIFprotocol OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240.5
brMultiIFtcpip OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240.5.2
brMultiIFTCPIPTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1		not-accessible	mandatory
brMultiIFTCPIPEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1		not-accessible	mandatory
brMultiIFTCPIPAddress OBJECT-TYPE IP Address assigned to the print server.	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.1	IpAddress	read-write	mandatory
brMultiIFTCPIPSubnetMask OBJECT-TYPE Subnet mask assigned to the print server.	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.2	IpAddress	read-write	mandatory
brMultiIFTCPIPGateway OBJECT-TYPE Gateway/Router address assigned to the print server	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.3	IpAddress	read-write	mandatory
brMultiIFTCPIPMethod OBJECT-TYPE Method used to determine the IP Address. AUTO tries all protocols. STATIC uses the configured address. DHCP, BOOTP, and RARP use only that protocol.	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.4	INTEGER (0..7)	read-write	mandatory
brMultiIFTCPIPUpdate OBJECT-TYPE Hardware MAC address to be updated. This value is write only. Will read back as zeros.	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.5	OCTET STRING (SIZE(6))	read-write	mandatory
brMultiIFTCPIPTimeout OBJECT-TYPE Timeout used for LPD connections.	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.6	INTEGER (0..32767)	read-write	mandatory
brMultiIFTCPIPBootTries OBJECT-TYPE Number of attempts to use BOOTP, RARP, and DHCP.	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.7	INTEGER (0..32767)	read-write	mandatory
brMultiIFTCPIPRARPNoSubnet OBJECT-TYPE If enabled, do not set the subnet mask based on the RARP response.	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.8	INTEGER (0..1)	read-write	mandatory
brMultiIFTCPIPRARPNoGateway OBJECT-TYPE If enabled, do not set the gateway/router address based on the RARP response.	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.9	INTEGER (0..1)	read-write	mandatory
brMultiIFTCPIPUseMethod OBJECT-TYPE Method type that used set up TCP/IP configuration.	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.10	INTEGER (0..7)	read-write	mandatory
brMultiIFTCPIPMethodServer OBJECT-TYPE If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server.	1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.11	IpAddress	read-write	mandatory
brMultiIFnetbeui OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240.5.8
brMultiIFNetBIOSTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.8.1		not-accessible	mandatory
brMultiIFNetBIOSEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1		not-accessible	mandatory
brMultiIFNetBIOSIPMethod OBJECT-TYPE Method used to determine the IP Address of the WINS server. AUTO tries all protocols (currently only DHCP is tried). STATIC uses the configured address.	1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.1	INTEGER (0..1)	read-write	mandatory
brMultiIFTCPIPNetBIOSPrimaryWINSAddr OBJECT-TYPE The IP Address of the primary WINS server.	1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.2	IpAddress	read-write	mandatory
brMultiIFTCPIPNetBIOSSecondaryWINSAddr OBJECT-TYPE The IP Address of the secondary WINS server.	1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.3	IpAddress	read-write	mandatory
brMultiIFNetBEUIDomain OBJECT-TYPE The NetBEUI domain name.	1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.4	DisplayString (SIZE(0..15))	read-write	mandatory
brMultiIForiginalapipa OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240.5.12
brMultiIFAPIPATable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.12.1		not-accessible	mandatory
brMultiIFAPIPAEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1		not-accessible	mandatory
brMultiIFAPIPASupported OBJECT-TYPE 0 indicates the APIPA protocol is not supported. 1 indicates APIPA support is implemented by the firmware	1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1.1	INTEGER (0..1)	read-only	mandatory
brMultiIFAPIPAEnable OBJECT-TYPE 0 indicates the APIPA protocol is not enabled. 1 indicates that the APIPA protocol is enabled. Writing a non-zero value will enable the APIPA protocol if it is supported by the firmware.	1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1.2	INTEGER (0..1)	read-write	mandatory
brMultiIForiginalLAA OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240.5.14
brMultiIFLAATable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.14.1		not-accessible	mandatory
brMultiIFLAAEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1		not-accessible	mandatory
brMultiIFLAASupported OBJECT-TYPE This value indicate if the locally administered addressing is supported. 0: Not Supported 1: Supported	1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1.1	INTEGER (0..1)	read-only	mandatory
brMultiIFLAAMacAddress OBJECT-TYPE A locally administered address (LAA) that replaces the factory-assigned MAC address (UAA: universally administered address). If this setting is all-zero address (i.e. 6 bytes of zeros), the factory-assigned MAC address is used as the MAC address of the device. The LAA address must start with X2, X6, XA, or XE, where X is any hexadecimal digit 0 to F.	1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1.2	OCTET STRING (SIZE(6))	read-write	mandatory
brMultiIForiginalIPv6 OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240.5.15
brMultiIFIPv6AddressCountTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.1		not-accessible	mandatory
brMultiIFIPv6AddressCountEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.1.1		not-accessible	mandatory
brMultiIFIPv6AddressCount OBJECT-TYPE IPv6Address Counter.	1.3.6.1.4.1.2435.2.4.4.1240.5.15.1.1.1	INTEGER	read-only	mandatory
brMultiIFIPv6AddressTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.2		not-accessible	mandatory
brMultiIFIPv6AddressEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1		not-accessible	mandatory
brMultiIFIPv6AddressIndex OBJECT-TYPE index	1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.1	INTEGER (1..16)	read-only	mandatory
brMultiIFIPv6Address OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.2	Ipv6Address	read-only	mandatory
brMultiIFIPv6UseMethod OBJECT-TYPE Method type that used set up TCP/IP configuration. 0: Unknown (Information not supported) 1: Manually 2: DHCPv6 3: Stateless Address Auto-configuration 4: Reserved 5: Link Local	1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.3	INTEGER (0..7)	read-only	mandatory
brMultiIFIPv6MethodServer OBJECT-TYPE If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server.	1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.4	DisplayString (SIZE(0..64))	read-only	mandatory
brMultiIFIPv6StaticAddressCountTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.3		not-accessible	mandatory
brMultiIFIPv6StaticAddressCountEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.3.1		not-accessible	mandatory
brMultiIFIPv6StaticAddressCount OBJECT-TYPE IPv6StaticAddress Counter.	1.3.6.1.4.1.2435.2.4.4.1240.5.15.3.1.1	INTEGER	read-only	mandatory
brMultiIFIPv6StaticAddressTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.4		not-accessible	mandatory
brMultiIFIPv6StaticAddressEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1		not-accessible	mandatory
brMultiIFIPv6StaticAddressIndex OBJECT-TYPE index	1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.1	INTEGER (1..16)	read-only	mandatory
brMultiIFIPv6StaticAddressEnable OBJECT-TYPE index	1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.2	INTEGER	read-write	mandatory
brMultiIFIPv6StaticAddress OBJECT-TYPE IPv6 Static Address	1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.3	Ipv6Address	read-write	mandatory
brMultiIFIPv6StaticAddressPrefixLength OBJECT-TYPE IPv6Address Prefix Length	1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.4	INTEGER	read-write	mandatory
brMultiIFDNSIPv6AddressTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.5		not-accessible	mandatory
brMultiIFDNSIPv6AddressEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1		not-accessible	mandatory
brMultiIFPrimaryDNSIPv6Address OBJECT-TYPE Primary DNS IPv6 Address	1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1.1	Ipv6Address	read-write	mandatory
brMultiIFSecondaryDNSIPv6Address OBJECT-TYPE Secondary DNS IPv6 Address	1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1.2	Ipv6Address	read-write	mandatory
brMultiIForiginalWebServices OBJECT-IDENTITY	1.3.6.1.4.1.2435.2.4.4.1240.5.16
brMultiIFWebServicesTable OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.16.1		not-accessible	mandatory
brMultiIFWebServicesEntry OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1		not-accessible	mandatory
brMultiIFWebServicesName OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.1	DisplayString (SIZE(0..64))	read-write	mandatory
brMultiIFWebServicesInstanceID OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.2	INTEGER (1..2147483647)	read-write	mandatory
brMultiIFWebServicesMetadataVersion OBJECT-TYPE	1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.3	INTEGER (1..2147483647)	read-write	mandatory