BRCD-DOT1X-MIB
- Registered at
- 1.3.6.1.4.1.1991.1.1.3.38
- Last updated
- 2010-09-30 00:00
- Organization
- Brocade Communications Systems, Inc.
- Revisions
- 2010-09-30 00:00
- Namespace
- extreme
- Source file
BRCD-DOT1X-MIB- Digest
sha256:03e96359a3ed6d94bde8de2c3baa757de78028123edc896031d33c74e03e1cb1
Description
Management Information for configuration /querying of 802.1x authentication It is grouped into five MIBs - 1. Global level configurable admin /status 802.1x information 2. Port level EAPOL statistics information 3. Port level configuration information 4. Different Port state information and 5. 802.1x mac session information Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Contact
Technical Support Center 130 Holger Way, San Jose, CA 95134 Email: ipsupport@brocade.com Phone: 1-800-752-8061 URL: www.brocade.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRCD-DOT1X-MIB BRIDGE-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB P-BRIDGE-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| VlanId TEXTUAL-CONVENTION A 12-bit VLAN ID used in the VLAN Tag header. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| brcdDot1xAuthGlobalConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1991.1.1.3.38.1 | |||
| brcdDot1xAuthGlobalConfigQuietperiod OBJECT-TYPE When the Brocade device is unable to authenticate a Client, the amount of time the Brocade device waits before trying again.. The allowed range is from 1 to 4294967294 | 1.3.6.1.4.1.1991.1.1.3.38.1.1 | Unsigned32 (1..4294967294) | read-write | current |
| brcdDot1xAuthGlobalConfigTxPeriod OBJECT-TYPE When a Client does not send back an EAP(Extensible Authentication Protocol)-response/identity frame, the amount of time the Brocade device waits before retransmitting the EAP-request/identity frame to a Client The allowed range is from 1 to 4294967294 | 1.3.6.1.4.1.1991.1.1.3.38.1.2 | Unsigned32 (1..4294967294) | read-write | current |
| brcdDot1xAuthGlobalConfigSuppTimeOut OBJECT-TYPE When a supplicant (Client) does not respond to an EAP-request frame, the amount of time before the Brocade device retransmits the frame The allowed range is from 1 to 4294967294 | 1.3.6.1.4.1.1991.1.1.3.38.1.3 | Unsigned32 (1..4294967294) | read-write | current |
| brcdDot1xAuthGlobalConfigAuthServerTimeOut OBJECT-TYPE When the Authentication Server (RADIUS) does not respond to a message sent from the Client, the amount of time before the Brocade device retransmits the message. The allowed range is from 1 to 4294967294 | 1.3.6.1.4.1.1991.1.1.3.38.1.4 | Unsigned32 (1..4294967294) | read-write | current |
| brcdDot1xAuthGlobalConfigMaxReq OBJECT-TYPE The number of times the Brocade device retransmits an EAP-request/identity request frame if it does not receive an EAP-response/identity response frame from a Client | 1.3.6.1.4.1.1991.1.1.3.38.1.5 | Unsigned32 | read-write | current |
| brcdDot1xAuthGlobalConfigReAuthMax OBJECT-TYPE The number of re-authentication attempts that are permitted before the port becomes Unauthorized | 1.3.6.1.4.1.1991.1.1.3.38.1.6 | Unsigned32 | read-write | current |
| brcdDot1xAuthGlobalConfigReAuthPeriod OBJECT-TYPE How often the device automatically re-authenticates clients when periodic re-authentication is enabled The allowed range is from 1 to 4294967294 | 1.3.6.1.4.1.1991.1.1.3.38.1.7 | Unsigned32 (1..4294967294) | read-write | current |
| brcdDot1xAuthGlobalConfigProtocolVersion OBJECT-TYPE The EAP protocol version | 1.3.6.1.4.1.1991.1.1.3.38.1.8 | Unsigned32 | read-only | current |
| brcdDot1xAuthGlobalConfigTotalPortsEnabled OBJECT-TYPE The total number of ports that have 802.1x enabled | 1.3.6.1.4.1.1991.1.1.3.38.1.9 | Unsigned32 | read-only | current |
| brcdDot1xAuthGlobalConfigReauthStatus OBJECT-TYPE Used to enable / disable Reauthentication globally | 1.3.6.1.4.1.1991.1.1.3.38.1.10 | EnabledStatus | read-write | current |
| brcdDot1xAuthGlobalConfigMacSessionMaxAge OBJECT-TYPE The Max-Age of the 802.1x mac session- A value between 0 and 65535 | 1.3.6.1.4.1.1991.1.1.3.38.1.11 | Unsigned32 | read-write | current |
| brcdDot1xAuthGlobalConfigNoAgingDeniedSessions OBJECT-TYPE Enable / Disable Mac-Session-No Aging for Denied sessions | 1.3.6.1.4.1.1991.1.1.3.38.1.12 | EnabledStatus | read-write | current |
| brcdDot1xAuthGlobalConfigNoAgingPermittedSessions OBJECT-TYPE Enable / Disable Mac-Session-No Aging for Permitted sessions | 1.3.6.1.4.1.1991.1.1.3.38.1.13 | EnabledStatus | read-write | current |
| brcdDot1xAuthGlobalConfigAuthFailAction OBJECT-TYPE To Configure the action to take when the authentication fails | 1.3.6.1.4.1.1991.1.1.3.38.1.14 | INTEGER {blockTraffic(1), restrictedVlan(2)} | read-write | current |
| brcdDot1xAuthPortStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.1991.1.1.3.38.2 | |||
| brcdDot1xAuthPortStatTable OBJECT-TYPE A table that contains port EAP(Extensible Authentication Protocol) frames statistics for 802.1x authentication | 1.3.6.1.4.1.1991.1.1.3.38.2.1 | not-accessible | current | |
| brcdDot1xAuthPortStatEntry OBJECT-TYPE An entry of EAP frames statistics indexed by ifIndex | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1 | not-accessible | current | |
| brcdDot1xAuthPortStatRxEAPFrames OBJECT-TYPE The total number of EAPOL frames received on the port It includes EAP frames - | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.1 | Counter32 | read-only | current |
| brcdDot1xAuthPortStatTxEAPFrames OBJECT-TYPE The no of EAPOL frames transmitted on the port | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.2 | Counter32 | read-only | current |
| brcdDot1xAuthPortStatRxEAPStartFrames OBJECT-TYPE The number of EAPOL-Start frames received on the port | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.3 | Counter32 | read-only | current |
| brcdDot1xAuthPortStatRxEAPLogOffFrames OBJECT-TYPE The number of EAPOL-Logoff frames received on the port | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.4 | Counter32 | read-only | current |
| brcdDot1xAuthPortStatRxEAPRespIdFrames OBJECT-TYPE The number of EAP frames other than Response/Identity frames received on the port | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.5 | Counter32 | read-only | current |
| brcdDot1xAuthPortStatTxEAPReqIdFrames OBJECT-TYPE The number of EAP-Request/Identity frames transmitted on the port | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.6 | Counter32 | read-only | current |
| brcdDot1xAuthPortStatRxEAPInvalidFrames OBJECT-TYPE The number of invalid EAPOL frames received on the port | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.7 | Counter32 | read-only | current |
| brcdDot1xAuthPortStatEAPLastFrameVersionRx OBJECT-TYPE The version of last EAP frame received | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.8 | Unsigned32 | read-only | current |
| brcdDot1xAuthPortStatRxEAPRespOrIdFrames OBJECT-TYPE The number of received EAP response or Id frames on the port | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.9 | Counter32 | read-only | current |
| brcdDot1xAuthPortStatRxLengthErrorFrame OBJECT-TYPE The received EAP Length Error frame | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.10 | Integer32 | read-only | current |
| brcdDot1xAuthPortStatTxRequestFrames OBJECT-TYPE The number of transmitted EAP request frames on the port | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.11 | Counter32 | read-only | current |
| brcdDot1xAuthPortStatLastEAPFrameSource OBJECT-TYPE The MAC address of the source from which the last EAP frame came | 1.3.6.1.4.1.1991.1.1.3.38.2.1.1.12 | MacAddress | read-only | current |
| brcdDot1xAuthPortConfig OBJECT-IDENTITY | 1.3.6.1.4.1.1991.1.1.3.38.3 | |||
| brcdDot1xAuthPortConfigTable OBJECT-TYPE A table that allows configuration of dot1x values for a given port | 1.3.6.1.4.1.1991.1.1.3.38.3.1 | not-accessible | current | |
| brcdDot1xAuthPortConfigEntry OBJECT-TYPE An entry of 802.1x config values | 1.3.6.1.4.1.1991.1.1.3.38.3.1.1 | not-accessible | current | |
| brcdDot1xAuthPortConfigPortControl OBJECT-TYPE The configured port control type for the interface which can be 1. force-unauthorized - port's controlled port is placed unconditionally in the unauthorized state 2. control-auto - the controlled port is unauthorized until authentication takes place between client and RADIUS 3. force-authorized - the port's controlled port is placed unconditionally in the authorized state | 1.3.6.1.4.1.1991.1.1.3.38.3.1.1.1 | INTEGER {forceUnauthorized(1), controlauto(2), forceAuthorized(3)} | read-write | current |
| brcdDot1xAuthPortConfigFilterStrictSec OBJECT-TYPE To configure filter strict security on the interface - enable(1) or disable(0) | 1.3.6.1.4.1.1991.1.1.3.38.3.1.1.2 | EnabledStatus | read-write | current |
| brcdDot1xAuthPortConfigDot1xOnPort OBJECT-TYPE To Configure (enable / disable) 802.1x on an interface level | 1.3.6.1.4.1.1991.1.1.3.38.3.1.1.3 | EnabledStatus | read-write | current |
| brcdDot1xAuthPortState OBJECT-IDENTITY | 1.3.6.1.4.1.1991.1.1.3.38.4 | |||
| brcdDot1xAuthPortStateTable OBJECT-TYPE A table that contains entries of port dot1x values | 1.3.6.1.4.1.1991.1.1.3.38.4.1 | not-accessible | current | |
| brcdDot1xAuthPortStateEntry OBJECT-TYPE An entry of 802.1x config values indexed by ifIndex to be able to have port values | 1.3.6.1.4.1.1991.1.1.3.38.4.1.1 | not-accessible | current | |
| brcdDot1xAuthPortStateMacSessions OBJECT-TYPE Number of 802.1x MAC sessions per port | 1.3.6.1.4.1.1991.1.1.3.38.4.1.1.1 | Unsigned32 | read-only | current |
| brcdDot1xAuthPortStateAuthMacSessions OBJECT-TYPE Number of Authorized MAC sessions per port | 1.3.6.1.4.1.1991.1.1.3.38.4.1.1.2 | Unsigned32 | read-only | current |
| brcdDot1xAuthPortStateOriginalPVID OBJECT-TYPE Originally configured(not dynamically assigned) PVID(port's default VLAN ID) for the port | 1.3.6.1.4.1.1991.1.1.3.38.4.1.1.3 | Unsigned32 | read-only | current |
| brcdDot1xAuthPortStatePVIDMacTotal OBJECT-TYPE The number of devices transmitting untagged traffic on the port's PVID | 1.3.6.1.4.1.1991.1.1.3.38.4.1.1.4 | Unsigned32 | read-only | current |
| brcdDot1xAuthPortStatePVIDMacAuthorized OBJECT-TYPE The number of devices transmitting untagged traffic on the port's PVID as a result of dynamic VLAN assignment | 1.3.6.1.4.1.1991.1.1.3.38.4.1.1.5 | Unsigned32 | read-only | current |
| brcdDot1xAuthPortStatePortVlanState OBJECT-TYPE The Current Vlan state the port is in, which can be RADIUS -The port's PVID was dynamically assigned by a RADIUS server Restricted - The port's PVID is the restricted VLAN Normal - The port's PVID is not set by a RADIUS server, nor is it the restricted VLAN | 1.3.6.1.4.1.1991.1.1.3.38.4.1.1.6 | INTEGER {radius(1), restricted(2), normal(3)} | read-only | current |
| brcdDot1xAuthPortStatePVID OBJECT-TYPE The Dot1x Authentication default Port VLAN Id | 1.3.6.1.4.1.1991.1.1.3.38.4.1.1.7 | Unsigned32 | read-only | current |
| brcdDot1xAuthPortStateRestrictPVID OBJECT-TYPE Restrict PVID | 1.3.6.1.4.1.1991.1.1.3.38.4.1.1.8 | Unsigned32 | read-only | current |
| brcdDot1xAuthPortStateRadiusAssignPVID OBJECT-TYPE RADIUS assign PVID | 1.3.6.1.4.1.1991.1.1.3.38.4.1.1.9 | Unsigned32 | read-only | current |
| brcdDot1xAuthMacSession OBJECT-IDENTITY | 1.3.6.1.4.1.1991.1.1.3.38.5 | |||
| brcdDot1xAuthMacSessionTable OBJECT-TYPE A table that contains 802.1x MAC sessions | 1.3.6.1.4.1.1991.1.1.3.38.5.1 | not-accessible | current | |
| brcdDot1xAuthMacSessionEntry OBJECT-TYPE An entry containing information applicable to a particular interface and client MAC ie., dot1x-mac-session | 1.3.6.1.4.1.1991.1.1.3.38.5.1.1 | not-accessible | current | |
| brcdDot1xAuthMacSessionAuthMac OBJECT-TYPE Mac address of the client - which basically represents the username used for RADIUS authentication | 1.3.6.1.4.1.1991.1.1.3.38.5.1.1.1 | MacAddress | not-accessible | current |
| brcdDot1xAuthMacSessionUserName OBJECT-TYPE User name of the 802.1x mac session | 1.3.6.1.4.1.1991.1.1.3.38.5.1.1.2 | SnmpAdminString | read-only | current |
| brcdDot1xAuthMacSessionIncomingVlanId OBJECT-TYPE Incoming VLAN ID | 1.3.6.1.4.1.1991.1.1.3.38.5.1.1.3 | VlanId | read-only | current |
| brcdDot1xAuthMacSessionCurrentVlanId OBJECT-TYPE The VLAN to which the port is currently assigned | 1.3.6.1.4.1.1991.1.1.3.38.5.1.1.4 | VlanId | read-only | current |
| brcdDot1xAuthMacSessionAccessStatus OBJECT-TYPE The authentication state of the dot1x-mac-session - which can be permitted, denied, restricted or in the Init state | 1.3.6.1.4.1.1991.1.1.3.38.5.1.1.5 | INTEGER {permit(1), blocked(2), restrict(3), init(4)} | read-only | current |
| brcdDot1xAuthMacSessionMaxAge OBJECT-TYPE MAX Age of the mac session in which the MAC address is authenticated. | 1.3.6.1.4.1.1991.1.1.3.38.5.1.1.6 | Unsigned32 | read-only | current |
| brcdDot1xAuthMacSessionAddrType OBJECT-TYPE Client(supplicant) IP address Type. Supported address types are ipv4(1) and ipv6(2) | 1.3.6.1.4.1.1991.1.1.3.38.5.1.1.7 | InetAddressType | read-only | current |
| brcdDot1xAuthMacSessionIpAddr OBJECT-TYPE The IP Address of the client | 1.3.6.1.4.1.1991.1.1.3.38.5.1.1.8 | InetAddress | read-only | current |
| brcdDot1xAuthMacSessionAging OBJECT-TYPE The age's type - Hardware or Software aging, Ena in which case the aging hasn't started, or notapplicable when there is a fake 802.1x mac session | 1.3.6.1.4.1.1991.1.1.3.38.5.1.1.9 | INTEGER {software(1), hardware(2), ena(3), notapplicable(4)} | read-only | current |
| brcdDot1xAuthGlobalAdminGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1991.1.1.3.38.6 | |||
| brcdDot1xAuthGlobalAdminConfigStatus OBJECT-TYPE Used to enable /disable 802.1x authentication globally | 1.3.6.1.4.1.1991.1.1.3.38.6.1 | EnabledStatus | read-write | current |