MIBs Depot

BLADETYPE2-ACL-MIB

Registered at
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9
Last updated
2005-10-12 00:00
Organization
Hewlett Packard Company
Namespace
hp
Source file
BLADETYPE2-ACL-MIB
Digest
sha256:b99371e87c865aeb5e929656d8704c83b1f8259b169cd6c05a314605d16a0cb0

Description

The MIB module for the Access Control List configuration and statistics.

Contact

customerservice@hp.com

Imports

FromSymbols
HP-SWITCH-PL-MIBhpSwitchBladeType2-Mgmt
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BLADETYPE2-ACL-MIB
BRIDGE-MIB
HP-SWITCH-PL-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
acConfig
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1
acList
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1
aclCurCfgTable
OBJECT-TYPE
The table of current ACL configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1not-accessiblecurrent
aclCurCfgEntry
OBJECT-TYPE
Current information about a particular ACL configuration entry.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1not-accessiblecurrent
aclCurCfgIndex
OBJECT-TYPE
The index associated with this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.1Unsigned32not-accessiblecurrent
aclCurCfgBlock
OBJECT-TYPE
The index of the ACL block to which this ACL entry is a member of. A value of zero means the ACL is not a member of any block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.2Unsigned32read-onlycurrent
aclCurCfgGroup
OBJECT-TYPE
The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.3Unsigned32read-onlycurrent
aclCurCfgFilterAction
OBJECT-TYPE
The action to be performed on a packet that matches the filter settings of this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.4INTEGER {none(0), permit(1), deny(2), setcos(3)}read-onlycurrent
aclCurCfgFilterActionSetCOS
OBJECT-TYPE
The value to be used when the action to be performed is setCOS for this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.5INTEGER {none(0), cos0(1), cos1(2), cos2(3), cos3(4), cos4(5), cos5(6), cos6(7), cos7(8)}read-onlycurrent
aclCurCfgEthFmt
OBJECT-TYPE
The packet ethernet format to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.6INTEGER {none(0), ethernet2(1), snap(2), llc(3), ieee802dot3(4)}read-onlycurrent
aclCurCfgTagFmt
OBJECT-TYPE
The packet tag format to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.7INTEGER {untagged(1), tagged(2)}read-onlycurrent
aclCurCfgSrcMACAddress
OBJECT-TYPE
The source MAC address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.9MacAddressread-onlycurrent
aclCurCfgSrcMACMask
OBJECT-TYPE
The address mask applied to aclCurCfgSrcMACAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.10MacAddressread-onlycurrent
aclCurCfgDstMACAddress
OBJECT-TYPE
The destination MAC address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.11MacAddressread-onlycurrent
aclCurCfgDstMACMask
OBJECT-TYPE
The address mask applied to aclCurCfgDstMACAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.12MacAddressread-onlycurrent
aclCurCfgEthernetTypeName
OBJECT-TYPE
The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.13INTEGER {none(0), arp(1), ipv4(2), ipv6(3), mpls(4), rarp(5), any(6), other(7)}read-onlycurrent
aclCurCfgEthernetTypeValue
OBJECT-TYPE
The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.14INTEGER (0..65535)read-onlycurrent
aclCurCfgVLanId
OBJECT-TYPE
The virtual LAN identifier to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.15INTEGER (0..4095)read-onlycurrent
aclCurCfgVLanMask
OBJECT-TYPE
The mask applied to aclCurCfgVLanId for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.16INTEGER (0..4095)read-onlycurrent
aclCurCfg8021pPriority
OBJECT-TYPE
The 802.1p priority to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.17INTEGER {none(0), priority0(1), priority1(2), priority2(3), priority3(4), priority4(5), priority5(6), priority6(7), priority7(8)}read-onlycurrent
aclCurCfgTypeOfService
OBJECT-TYPE
The type of service to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.18INTEGER (0..255)read-onlycurrent
aclCurCfgProtocol
OBJECT-TYPE
The protocol to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.19INTEGER (0..255)read-onlycurrent
aclCurCfgSrcIPAddress
OBJECT-TYPE
The source IP address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.20IpAddressread-onlycurrent
aclCurCfgSrcIPMask
OBJECT-TYPE
The address mask applied to aclCurCfgSrcIPAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.21IpAddressread-onlycurrent
aclCurCfgDstIPAddress
OBJECT-TYPE
The destination IP address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.22IpAddressread-onlycurrent
aclCurCfgDstIPMask
OBJECT-TYPE
The address mask applied to aclCurCfgDstIPAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.23IpAddressread-onlycurrent
aclCurCfgSrcPort
OBJECT-TYPE
The source TCP/UDP port number to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.24INTEGER (0..65535)read-onlycurrent
aclCurCfgSrcPortMask
OBJECT-TYPE
The mask applied to aclCurCfgSrcPort for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.25INTEGER (0..65535)read-onlycurrent
aclCurCfgDstPort
OBJECT-TYPE
The destination TCP/UDP port number to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.26INTEGER (0..65535)read-onlycurrent
aclCurCfgDstPortMask
OBJECT-TYPE
The mask applied to aclCurCfgDstPort for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.27INTEGER (0..65535)read-onlycurrent
aclCurCfgTCPFlags
OBJECT-TYPE
The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.28Bits {reserved1(0), reserved2(1), tcpURG(2), tcpACK(3), tcpPSH(4), tcpRST(5), tcpSYN(6), tcpFIN(7)}read-onlycurrent
aclCurCfgEgressPorts
OBJECT-TYPE
The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.29OCTET STRINGread-onlycurrent
aclCurCfgStatistics
OBJECT-TYPE
Whether statistics collection for this ACL is enabled or not.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.30INTEGER {disable(0), enable(1)}read-onlycurrent
aclCurCfgTCPFlagsMask
OBJECT-TYPE
The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.1.1.39Bits {reserved1(0), reserved2(1), tcpURG(2), tcpACK(3), tcpPSH(4), tcpRST(5), tcpSYN(6), tcpFIN(7)}read-onlycurrent
aclNewCfgTable
OBJECT-TYPE
The table of new ACL configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2not-accessiblecurrent
aclNewCfgEntry
OBJECT-TYPE
New information about a particular ACL configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1not-accessiblecurrent
aclNewCfgIndex
OBJECT-TYPE
The index associated with this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.1Unsigned32not-accessiblecurrent
aclNewCfgBlock
OBJECT-TYPE
The index of the ACL block to which this ACL entry is a member of. A value of zero means the ACL is not a member of any block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.2Unsigned32read-onlycurrent
aclNewCfgGroup
OBJECT-TYPE
The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.3Unsigned32read-onlycurrent
aclNewCfgFilterAction
OBJECT-TYPE
The action to be performed on a packet that matches the filter settings of this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.4INTEGER {none(0), permit(1), deny(2), setcos(3)}read-writecurrent
aclNewCfgFilterActionSetCOS
OBJECT-TYPE
The COS queue to be used when the action for this ACL entry is set to SetCOS.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.5INTEGER {none(0), cos0(1), cos1(2), cos2(3), cos3(4), cos4(5), cos5(6), cos6(7), cos7(8)}read-writecurrent
aclNewCfgEthFmt
OBJECT-TYPE
The packet ethernet format to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.6INTEGER {none(0), ethernet2(1), snap(2), llc(3), ieee802dot3(4)}read-writecurrent
aclNewCfgTagFmt
OBJECT-TYPE
The packet tagging format to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.7INTEGER {none(1), tagged(2)}read-writecurrent
aclNewCfgSrcMACAddress
OBJECT-TYPE
The source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.9MacAddressread-writecurrent
aclNewCfgSrcMACMask
OBJECT-TYPE
The address mask to be applied to aclNewCfgSrcMACAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.10MacAddressread-writecurrent
aclNewCfgDstMACAddress
OBJECT-TYPE
The destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.11MacAddressread-writecurrent
aclNewCfgDstMACMask
OBJECT-TYPE
The address mask to be applied to aclNewCfgDstMACAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.12MacAddressread-writecurrent
aclNewCfgEthernetTypeName
OBJECT-TYPE
The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered. If this object is set to a value other than other(7), the value of the aclNewCfgEthernetTypeValue object is automatically set, as follows: aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue none(0) 0 arp(1) 2054 (0x0806) ipv4(2) 2048 (0x0800) ipv6(3) 34525 (0x86dd) mpls(4) 34887 (0x8847) rarp(5) 32821 (0x8035) any(6) 65535 (0xffff)
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.13INTEGER {none(0), arp(1), ipv4(2), ipv6(3), mpls(4), rarp(5), any(6), other(7)}read-writecurrent
aclNewCfgEthernetTypeValue
OBJECT-TYPE
The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.14INTEGER (0..65535)read-writecurrent
aclNewCfgVLanId
OBJECT-TYPE
The virtual LAN identifier to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgVLanMask object, if not yet set, will be automatically set to 4095 (0xfff).
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.15INTEGER (1..4095)read-writecurrent
aclNewCfgVLanMask
OBJECT-TYPE
The mask to be applied to aclNewCfgVLanId for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.16INTEGER (0..4095)read-writecurrent
aclNewCfg8021pPriority
OBJECT-TYPE
The 802.1p priority to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.17INTEGER {none(0), priority0(1), priority1(2), priority2(3), priority3(4), priority4(5), priority5(6), priority6(7), priority7(8)}read-writecurrent
aclNewCfgTypeOfService
OBJECT-TYPE
The type of service to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.18INTEGER (0..255)read-writecurrent
aclNewCfgProtocol
OBJECT-TYPE
The protocol to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.19INTEGER (0..255)read-writecurrent
aclNewCfgSrcIPAddress
OBJECT-TYPE
The source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set to 255.255.255.255.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.20IpAddressread-writecurrent
aclNewCfgSrcIPMask
OBJECT-TYPE
The address mask to be applied to aclNewCfgSrcIPAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.21IpAddressread-writecurrent
aclNewCfgDstIPAddress
OBJECT-TYPE
The destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically set to 255.255.255.255.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.22IpAddressread-writecurrent
aclNewCfgDstIPMask
OBJECT-TYPE
The address mask to be applied to aclNewCfgDstIPAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.23IpAddressread-writecurrent
aclNewCfgSrcPort
OBJECT-TYPE
The source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0xffff).
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.24INTEGER (1..65535)read-writecurrent
aclNewCfgSrcPortMask
OBJECT-TYPE
The mask to be applied to aclNewCfgSrcPort for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.25INTEGER (0..65535)read-writecurrent
aclNewCfgDstPort
OBJECT-TYPE
The destination TCP/UDP port number to be filtered. Whenever this object is set the aclNewCfgSrcPortMask object, if not yet set, will be automatically set to 65535 (0xffff).
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.26INTEGER (1..65535)read-writecurrent
aclNewCfgDstPortMask
OBJECT-TYPE
The mask to be applied to aclNewCfgDstPort for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.27INTEGER (0..65535)read-writecurrent
aclNewCfgTCPFlags
OBJECT-TYPE
The TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.28Bits {reserved1(0), reserved2(1), tcpURG(2), tcpACK(3), tcpPSH(4), tcpRST(5), tcpSYN(6), tcpFIN(7)}read-writecurrent
aclNewCfgEgressPorts
OBJECT-TYPE
The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.29OCTET STRINGread-onlycurrent
aclNewCfgStatistics
OBJECT-TYPE
Whether statistics collection for this ACL is enabled or not.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.30INTEGER {disable(0), enable(1)}read-writecurrent
aclNewCfgAddEgressPort
OBJECT-TYPE
The port to be added to the specified ACL for egress filtering. A value of zero is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.31Unsigned32read-writecurrent
aclNewCfgRemoveEgressPort
OBJECT-TYPE
The port to be removed from the specified ACL. A value of zero is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.32Unsigned32read-writecurrent
aclNewCfgDelete
OBJECT-TYPE
This is an action object to delete an ACL entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.33INTEGER {other(1), delete(2)}read-writecurrent
aclNewCfgTCPFlagsMask
OBJECT-TYPE
The TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Default value is 0x3f.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.1.2.1.39Bits {reserved1(0), reserved2(1), tcpURG(2), tcpACK(3), tcpPSH(4), tcpRST(5), tcpSYN(6), tcpFIN(7)}read-writecurrent
aclBlock
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2
aclBlockCurCfgTable
OBJECT-TYPE
The table of current ACL block configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.1not-accessiblecurrent
aclBlockCurCfgEntry
OBJECT-TYPE
Current information about a particular ACL block configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.1.1not-accessiblecurrent
aclBlockCurCfgIndex
OBJECT-TYPE
The index associated with this ACL block entry.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.1.1.1Unsigned32not-accessiblecurrent
aclBlockCurCfgMemberAcls
OBJECT-TYPE
The ACL members of this ACL block, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the block. 0 - the represented ACL is not a member of the block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.1.1.2OCTET STRINGread-onlycurrent
aclBlockNewCfgTable
OBJECT-TYPE
The table of new ACL block configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2not-accessiblecurrent
aclBlockNewCfgEntry
OBJECT-TYPE
New information about a particular ACL block configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1not-accessiblecurrent
aclBlockNewCfgIndex
OBJECT-TYPE
The index associated with this ACL block entry.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.1Unsigned32not-accessiblecurrent
aclBlockNewCfgMemberAcls
OBJECT-TYPE
The ACL members of this ACL block, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the block. 0 - the represented ACL is not a member of the block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.2OCTET STRINGread-onlycurrent
aclBlockNewCfgAddAcl
OBJECT-TYPE
The index of the ACL entry to be added into this ACL block. A successful set operation on this object will also set the bit corresponding to the ACL entry in the aclBlockNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.3Unsigned32read-writecurrent
aclBlockNewCfgRemoveAcl
OBJECT-TYPE
The index of the ACL entry to be removed from this ACL block. A successful set operation on this object will unset the bit corresponding to the ACL entry in the aclBlockNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.4Unsigned32read-writecurrent
aclBlockNewCfgDelete
OBJECT-TYPE
This is an action object to delete an ACL block. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.5INTEGER {other(1), delete(2)}read-writecurrent
aclGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3
aclGroupCurCfgTable
OBJECT-TYPE
The table of current ACL Group configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.1not-accessiblecurrent
aclGroupCurCfgEntry
OBJECT-TYPE
Information about a particular ACL configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.1.1not-accessiblecurrent
aclGroupCurCfgIndex
OBJECT-TYPE
The index associated with this ACL Group entry.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.1.1.1Unsigned32not-accessiblecurrent
aclGroupCurCfgMemberAcls
OBJECT-TYPE
The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.1.1.2OCTET STRINGread-onlycurrent
aclGroupCurCfgMemberBlocks
OBJECT-TYPE
The ACL block members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL Block 9 || || || ||___ ACL Block 8 || |____ ACL Block 7 || . . . . ||_________ ACL Block 2 |__________ ACL Block 1 where x: 1 - the represented ACL block is a member of the group. 0 - the represented ACL block is not a member of the group.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.1.1.3OCTET STRINGread-onlycurrent
aclGroupNewCfgTable
OBJECT-TYPE
The table of new ACL Group configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2not-accessiblecurrent
aclGroupNewCfgEntry
OBJECT-TYPE
New information about a particular ACL configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1not-accessiblecurrent
aclGroupNewCfgIndex
OBJECT-TYPE
The index associated with this ACL Group entry.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.1Unsigned32not-accessiblecurrent
aclGroupNewCfgMemberAcls
OBJECT-TYPE
The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.2OCTET STRINGread-onlycurrent
aclGroupNewCfgMemberBlocks
OBJECT-TYPE
The ACL block members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL Block 9 || || || ||___ ACL Block 8 || |____ ACL Block 7 || . . . . ||_________ ACL Block 2 |__________ ACL Block 1 where x: 1 - the represented ACL block is a member of the group. 0 - the represented ACL block is not a member of the group.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.3OCTET STRINGread-onlycurrent
aclGroupNewCfgAddAcl
OBJECT-TYPE
The index of the ACL entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.4Unsigned32read-writecurrent
aclGroupNewCfgRemoveAcl
OBJECT-TYPE
The index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.5Unsigned32read-writecurrent
aclGroupNewCfgAddBlock
OBJECT-TYPE
The index of the ACL block entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL block entry in the aclGroupNewCfgMemberBlocks bitmap. A value of zero is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.6Unsigned32read-writecurrent
aclGroupNewCfgRemoveBlock
OBJECT-TYPE
The index of the ACL block entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL block entry in the aclGroupNewCfgMemberBlocks bitmap. A value of zero is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.7Unsigned32read-writecurrent
aclGroupNewCfgDelete
OBJECT-TYPE
This is an action object to delete an ACL group. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.3.2.1.8INTEGER {other(1), delete(2)}read-writecurrent