MIBs Depot

BGP4-V2-MIB-JUNIPER

Registered at
1.3.6.1.4.1.2636.5.1.1
Last updated
2003-09-09 15:08
Organization
IETF IDR Working Group
Revisions
2012-12-17 00:00, 2003-09-09 15:08, 2002-11-04 00:00
Namespace
juniper
Source file
BGP4-V2-MIB-JUNIPER
Digest
sha256:c62b345ba0e73c0a968420e2906b5feac91a304281a9d62a9afd9e08e81483ff

Description

This MIB module defines management objects for the Border Gateway Protocol, Version 4.

Contact

E-mail: idr@merit.net Jeffrey Haas (Editor) 825 Victors Way, Suite 100 Ann Arbor, MI 48108 Tel: +1 734 222-1600 Fax: +1 734 222-1602 E-mail: jhaas@nexthop.com

Imports

FromSymbols
INET-ADDRESS-MIBInetAddress, InetAddressPrefixLength, InetAddressType, InetAutonomousSystemNumber, InetPortNumber
JUNIPER-EXPERIMENT-MIBjnxBgpM2Experiment
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, RowPointer, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BGP4-V2-MIB-JUNIPER
INET-ADDRESS-MIB
JUNIPER-EXPERIMENT-MIB
JUNIPER-SMI
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
JnxBgpM2Community
TEXTUAL-CONVENTION
The representation of a BGP Community.
current
JnxBgpM2ExtendedCommunity
TEXTUAL-CONVENTION
The representation of a BGP Extended Community.
current
JnxBgpM2Identifier
TEXTUAL-CONVENTION
The representation of a BGP Identifier. The BGP Identifier should be represented in the OCTET STRING as with the first OCTET of the string containing the first OCTET of the BGP Identifier received or sent in the OPEN packet and so on. Even though the BGP Identifier is trending away from an IP address it is still displayed as if it was one, even when it would be an illegal IP address.
current
JnxBgpM2Safi
TEXTUAL-CONVENTION
The representation of a BGP Safi
current

Objects

NameOIDSyntaxAccessStatus
jnxBgpM2BaseScalars
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1
jnxBgpM2BaseNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.0
jnxBgpM2Version
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.1
jnxBgpM2VersionTable
OBJECT-TYPE
Table of supported BGP versions.
1.3.6.1.4.1.2636.5.1.1.1.1.1not-accessiblecurrent
jnxBgpM2VersionEntry
OBJECT-TYPE
Entry containing data on a given supported version of the Border Gateway Protocol and the level of support provided. It is expected that any agent implementation supporting this MIB module will report support for Version 4 of the Border Gateway Protocol at the very minimum.
1.3.6.1.4.1.2636.5.1.1.1.1.1.1not-accessiblecurrent
jnxBgpM2VersionIndex
OBJECT-TYPE
The version number of the BGP Protocol.
1.3.6.1.4.1.2636.5.1.1.1.1.1.1.1Unsigned32 (0..255)read-onlycurrent
jnxBgpM2VersionSupported
OBJECT-TYPE
This value is TRUE if this version of the BGP protocol identified in 'jnxBgpM2VersionIndex' is supported. The absence of a row for a particular jnxBgpM2VersionIndex indicates that that jnxBgpM2VersionIndex protocol version number is not supported.
1.3.6.1.4.1.2636.5.1.1.1.1.1.1.2TruthValueread-onlycurrent
jnxBgpM2SupportedAuthentication
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.2
jnxBgpM2SupportedAuthTable
OBJECT-TYPE
The supported BGP authentication mechanisms.
1.3.6.1.4.1.2636.5.1.1.1.2.1not-accessiblecurrent
jnxBgpM2SupportedAuthEntry
OBJECT-TYPE
Entry containing information whether a given BGP authentication mechanism is supported by this implementation.
1.3.6.1.4.1.2636.5.1.1.1.2.1.1not-accessiblecurrent
jnxBgpM2SupportedAuthCode
OBJECT-TYPE
The BGP authentication code.
1.3.6.1.4.1.2636.5.1.1.1.2.1.1.1Unsigned32 (0..255)read-onlycurrent
jnxBgpM2SupportedAuthValue
OBJECT-TYPE
This value is TRUE if a given authentication method is supported by the local implementation.
1.3.6.1.4.1.2636.5.1.1.1.2.1.1.2TruthValueread-onlycurrent
jnxBgpM2SupportedCapabilities
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.3
jnxBgpM2CapabilitySupportAvailable
OBJECT-TYPE
This value is TRUE if capability support is available and is enabled.
1.3.6.1.4.1.2636.5.1.1.1.3.1TruthValueread-onlycurrent
jnxBgpM2SupportedCapabilitiesTable
OBJECT-TYPE
Table of supported BGP-4 capabilities.
1.3.6.1.4.1.2636.5.1.1.1.3.2not-accessiblecurrent
jnxBgpM2SupportedCapabilitiesEntry
OBJECT-TYPE
Information about supported capabilities indexed by capability number.
1.3.6.1.4.1.2636.5.1.1.1.3.2.1not-accessiblecurrent
jnxBgpM2SupportedCapabilityCode
OBJECT-TYPE
Index of supported capability. The index directly corresponds with the BGP-4 Capability Advertisement Capability Code.
1.3.6.1.4.1.2636.5.1.1.1.3.2.1.1Unsigned32 (0..255)read-onlycurrent
jnxBgpM2SupportedCapability
OBJECT-TYPE
This value is True if this capability is supported, False otherwise.
1.3.6.1.4.1.2636.5.1.1.1.3.2.1.2TruthValueread-onlycurrent
jnxBgpM2AsSize
OBJECT-TYPE
The size of the AS value in this implementation. The semantics of this are determined as per the as-4bytes draft.
1.3.6.1.4.1.2636.5.1.1.1.4INTEGER {twoOctet(1), fourOctet(2)}read-onlycurrent
jnxBgpM2LocalAs
OBJECT-TYPE
The local autonomous system number. If the jnxBgpM2AsSize is twoOctet, then the range is constrained to be 0-65535.
1.3.6.1.4.1.2636.5.1.1.1.5InetAutonomousSystemNumberread-onlycurrent
jnxBgpM2LocalIdentifier
OBJECT-TYPE
The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier.
1.3.6.1.4.1.2636.5.1.1.1.6JnxBgpM2Identifierread-onlycurrent
jnxBgpM2BaseScalarExtensions
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.7
jnxBgpM2BaseScalarNonCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.7.1
jnxBgpM2BaseScalarRouteReflectExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.7.1.2796
jnxBgpM2RouteReflector
OBJECT-TYPE
This value is TRUE if this implementation supports the BGP Route Reflection Extension and is enabled as a route reflector. If the BGP Route Reflection extension is not supported this value must be FALSE.
1.3.6.1.4.1.2636.5.1.1.1.7.1.2796.1TruthValueread-onlycurrent
jnxBgpM2ClusterId
OBJECT-TYPE
The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's JnxBgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled.
1.3.6.1.4.1.2636.5.1.1.1.7.1.2796.2JnxBgpM2Identifierread-onlycurrent
jnxBgpM2BaseScalarASConfedExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.7.1.3065
jnxBgpM2ConfederationRouter
OBJECT-TYPE
This value is TRUE if this implementation supports the BGP AS Confederations Extension and this router is configured to be in a confederation.
1.3.6.1.4.1.2636.5.1.1.1.7.1.3065.1TruthValueread-onlycurrent
jnxBgpM2ConfederationId
OBJECT-TYPE
The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router.
1.3.6.1.4.1.2636.5.1.1.1.7.1.3065.2InetAutonomousSystemNumberread-onlycurrent
jnxBgpM2BaseScalarCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.7.2
jnxBgpM2BaseScalarConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.8
jnxBgpM2CfgBaseScalarStorageType
OBJECT-TYPE
This object specifies the intended storage type for all configurable base scalars.
1.3.6.1.4.1.2636.5.1.1.1.8.1StorageTyperead-writecurrent
jnxBgpM2CfgLocalAs
OBJECT-TYPE
The local autonomous system number. If the jnxBgpM2AsSize is twoOctet, then the range is constrained to be 0-65535.
1.3.6.1.4.1.2636.5.1.1.1.8.2InetAutonomousSystemNumberread-writecurrent
jnxBgpM2CfgLocalIdentifier
OBJECT-TYPE
The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier.
1.3.6.1.4.1.2636.5.1.1.1.8.3JnxBgpM2Identifierread-writecurrent
jnxBgpM2CfgBaseScalarExtensions
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.8.4
jnxBgpM2CfgBaseScalarNonCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.8.4.1
jnxBgpM2CfgBaseScalarReflectorExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.8.4.1.2796
jnxBgpM2CfgRouteReflector
OBJECT-TYPE
This value is set to true if this implementation will be supporting route reflection.
1.3.6.1.4.1.2636.5.1.1.1.8.4.1.2796.1TruthValueread-writecurrent
jnxBgpM2CfgClusterId
OBJECT-TYPE
The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's JnxBgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled.
1.3.6.1.4.1.2636.5.1.1.1.8.4.1.2796.2JnxBgpM2Identifierread-writecurrent
jnxBgpM2CfgBaseScalarASConfedExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.8.4.1.3065
jnxBgpM2CfgConfederationRouter
OBJECT-TYPE
This value is set to true if this implementation will be supporting BGP AS Confederations.
1.3.6.1.4.1.2636.5.1.1.1.8.4.1.3065.1TruthValueread-writecurrent
jnxBgpM2CfgConfederationId
OBJECT-TYPE
The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router.
1.3.6.1.4.1.2636.5.1.1.1.8.4.1.3065.2InetAutonomousSystemNumberread-writecurrent
jnxBgpM2CfgBaseScalarCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.1.8.4.2
jnxBgpM2Peer
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2
jnxBgpM2PeerData
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.1
jnxBgpM2PeerTable
OBJECT-TYPE
BGP peer table. This table contains, one entry per remote BGP peer, any information about the connections with the remote BGP peers.
1.3.6.1.4.1.2636.5.1.1.2.1.1not-accessiblecurrent
jnxBgpM2PeerEntry
OBJECT-TYPE
Entry containing information about the connection with a remote BGP peer.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1not-accessiblecurrent
jnxBgpM2PeerIdentifier
OBJECT-TYPE
The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the jnxBgpM2PeerState is in the OpenConfirm or the Established state.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.1JnxBgpM2Identifierread-onlycurrent
jnxBgpM2PeerState
OBJECT-TYPE
The remote BGP peer's FSM state.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.2INTEGER {idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)}read-onlycurrent
jnxBgpM2PeerStatus
OBJECT-TYPE
Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The jnxBgpM2PeerState will generally be in the idle state when the FSM is halted, although some extensions such as Graceful Restart will leave the peer in the Idle state but with the FSM running.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.3INTEGER {halted(1), running(2)}read-onlycurrent
jnxBgpM2PeerConfiguredVersion
OBJECT-TYPE
The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.4Unsigned32 (1..255)read-onlycurrent
jnxBgpM2PeerNegotiatedVersion
OBJECT-TYPE
The negotiated version of BGP running between the two peers.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.5Unsigned32 (1..255)read-onlycurrent
jnxBgpM2PeerLocalAddrType
OBJECT-TYPE
The address family of the local end of the peering session.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.6InetAddressTyperead-onlycurrent
jnxBgpM2PeerLocalAddr
OBJECT-TYPE
The address of the local end of the peering session.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.7InetAddress (SIZE(4..20))read-onlycurrent
jnxBgpM2PeerLocalPort
OBJECT-TYPE
The local port for the TCP connection between the BGP peers.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.8InetPortNumberread-onlycurrent
jnxBgpM2PeerLocalAs
OBJECT-TYPE
Some implementations of BGP can represent themselves as multiple ASs. This is the AS that this peering session is representing itself as to the remote peer.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.9InetAutonomousSystemNumberread-onlycurrent
jnxBgpM2PeerRemoteAddrType
OBJECT-TYPE
The address family of the remote end of the peering session.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.10InetAddressTyperead-onlycurrent
jnxBgpM2PeerRemoteAddr
OBJECT-TYPE
The address of the remote end of the peering session.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.11InetAddress (SIZE(4..20))read-onlycurrent
jnxBgpM2PeerRemotePort
OBJECT-TYPE
The remote port for the TCP connection between the BGP peers. In the case of a transport for which the notion of 'port' is irrelevant, an instance value of -1 should be returned by the agent for this object. Note that the objects jnxBgpM2PeerLocalAddr, jnxBgpM2PeerLocalPort, jnxBgpM2PeerRemoteAddr and jnxBgpM2PeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. or even the ipv6 TCP MIB as in rfc2452.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.12InetPortNumberread-onlycurrent
jnxBgpM2PeerRemoteAs
OBJECT-TYPE
The remote autonomous system number.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.13InetAutonomousSystemNumberread-onlycurrent
jnxBgpM2PeerIndex
OBJECT-TYPE
This value is a unique index for the remote peer entry in the jnxBgpM2PeerTable. It is assigned by the agent at the point of creation of the jnxBgpM2PeerTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2PeerIndex row instance values across rows of the jnxBgpM2PeerTable. It is used to provide an index structure for other tables whose data is logically per-peer. For explicitly configured peers, this value will remain consistent until this row is deleted by deleting the configured peers. Unconfigured peers will generate a monotonically increasing number when a BGP FSM is built to process the peering session. Values in the jnxBgpM2PeerTable and other tables utilizing jnxBgpM2PeerIndex are expected to remain in existence for an arbitrary time after the unconfigured peer has been deleted in order to allow management applications to extract useful management information for those peers. Thus, an unconfigured peer using the same indices as the jnxBgpM2PeerTable that comes up while this row still exists will re-utilize the same row.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.14Unsigned32read-onlycurrent
jnxBgpM2PeerRoutingInstance
OBJECT-TYPE
Routing instance index.
1.3.6.1.4.1.2636.5.1.1.2.1.1.1.15Unsigned32read-onlycurrent
jnxBgpM2PeerErrors
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.2
jnxBgpM2PeerErrorsTable
OBJECT-TYPE
On a per peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. If no entry for a given peer, by its jnxBgpM2PeerIndex, exists in this table, then no such errors have been observed, reported, and recorded on the session.
1.3.6.1.4.1.2636.5.1.1.2.2.1not-accessiblecurrent
jnxBgpM2PeerErrorsEntry
OBJECT-TYPE
Each entry contains information about errors sent and received for a particular BGP peer.
1.3.6.1.4.1.2636.5.1.1.2.2.1.1not-accessiblecurrent
jnxBgpM2PeerLastErrorReceived
OBJECT-TYPE
The last error code and subcode received by this BGP Speaker via a NOTIFICATION message for this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
1.3.6.1.4.1.2636.5.1.1.2.2.1.1.1OCTET STRING (SIZE(2))read-onlycurrent
jnxBgpM2PeerLastErrorSent
OBJECT-TYPE
The last error code and subcode sent by this BGP Speaker via a NOTIFICATION message to this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
1.3.6.1.4.1.2636.5.1.1.2.2.1.1.2OCTET STRING (SIZE(2))read-onlycurrent
jnxBgpM2PeerLastErrorReceivedTime
OBJECT-TYPE
The timestamp that the last NOTIFICATION was received from this peer.
1.3.6.1.4.1.2636.5.1.1.2.2.1.1.3TimeTicksread-onlycurrent
jnxBgpM2PeerLastErrorSentTime
OBJECT-TYPE
The timestamp that the last NOTIFICATION was sent to this peer.
1.3.6.1.4.1.2636.5.1.1.2.2.1.1.4TimeTicksread-onlycurrent
jnxBgpM2PeerLastErrorReceivedText
OBJECT-TYPE
This object contains an implementation specific explanation of the error that was reported.
1.3.6.1.4.1.2636.5.1.1.2.2.1.1.5SnmpAdminStringread-onlycurrent
jnxBgpM2PeerLastErrorSentText
OBJECT-TYPE
This object contains an implementation specific explanation of the error that is being reported.
1.3.6.1.4.1.2636.5.1.1.2.2.1.1.6SnmpAdminStringread-onlycurrent
jnxBgpM2PeerLastErrorReceivedData
OBJECT-TYPE
The last error code's data seen by this peer.
1.3.6.1.4.1.2636.5.1.1.2.2.1.1.7OCTET STRING (SIZE(0..4075))read-onlycurrent
jnxBgpM2PeerLastErrorSentData
OBJECT-TYPE
The last error code's data sent to this peer.
1.3.6.1.4.1.2636.5.1.1.2.2.1.1.8OCTET STRING (SIZE(0..4075))read-onlycurrent
jnxBgpM2PeerAuthentication
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.3
jnxBgpM2PeerAuthTable
OBJECT-TYPE
BGP peer authentication table. This table contains, one entry per BGP peer, information about the authentication with BGP peers.
1.3.6.1.4.1.2636.5.1.1.2.3.1not-accessiblecurrent
jnxBgpM2PeerAuthEntry
OBJECT-TYPE
Entry containing information about the authentication with a BGP peer.
1.3.6.1.4.1.2636.5.1.1.2.3.1.1not-accessiblecurrent
jnxBgpM2PeerAuthSent
OBJECT-TYPE
The local peer has sent authentication information to the remote peer in the BGP Authentication field.
1.3.6.1.4.1.2636.5.1.1.2.3.1.1.1TruthValueread-onlycurrent
jnxBgpM2PeerAuthSentCode
OBJECT-TYPE
The code of the authentication information sent to the remote peer.
1.3.6.1.4.1.2636.5.1.1.2.3.1.1.2Unsigned32 (0..255)read-onlycurrent
jnxBgpM2PeerAuthSentValue
OBJECT-TYPE
The payload of the authentication information from the remote peer.
1.3.6.1.4.1.2636.5.1.1.2.3.1.1.3OCTET STRING (SIZE(0..252))read-onlycurrent
jnxBgpM2PeerAuthRcvd
OBJECT-TYPE
The local peer has received authentication information from the remote peer in the BGP Authentication field.
1.3.6.1.4.1.2636.5.1.1.2.3.1.1.4TruthValueread-onlycurrent
jnxBgpM2PeerAuthRcvdCode
OBJECT-TYPE
The code of the authentication information received from the remote peer.
1.3.6.1.4.1.2636.5.1.1.2.3.1.1.5Unsigned32 (0..255)read-onlycurrent
jnxBgpM2PeerAuthRcvdValue
OBJECT-TYPE
The payload of the authentication information from the remote peer.
1.3.6.1.4.1.2636.5.1.1.2.3.1.1.6OCTET STRING (SIZE(0..252))read-onlycurrent
jnxBgpM2PeerTimers
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.4
jnxBgpM2PeerEventTimesTable
OBJECT-TYPE
A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the Established state.
1.3.6.1.4.1.2636.5.1.1.2.4.1not-accessiblecurrent
jnxBgpM2PeerEventTimesEntry
OBJECT-TYPE
Each row contains a set of statistics about time spent and events encountered in the peer session Established state.
1.3.6.1.4.1.2636.5.1.1.2.4.1.1not-accessiblecurrent
jnxBgpM2PeerFsmEstablishedTime
OBJECT-TYPE
This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.
1.3.6.1.4.1.2636.5.1.1.2.4.1.1.1Gauge32read-onlycurrent
jnxBgpM2PeerInUpdatesElapsedTime
OBJECT-TYPE
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time jnxBgpM2PeerInUpdates is incremented, the value of this object is set to zero (0). This value shall also be zero (0) when the peer is not in the Established state
1.3.6.1.4.1.2636.5.1.1.2.4.1.1.2Gauge32read-onlycurrent
jnxBgpM2PeerConfiguredTimersTable
OBJECT-TYPE
Per peer management data on BGP session timers.
1.3.6.1.4.1.2636.5.1.1.2.4.2not-accessiblecurrent
jnxBgpM2PeerConfiguredTimersEntry
OBJECT-TYPE
Each entry corresponds to the current state of BGP timers on a given peering session.
1.3.6.1.4.1.2636.5.1.1.2.4.2.1not-accessiblecurrent
jnxBgpM2PeerConnectRetryInterval
OBJECT-TYPE
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
1.3.6.1.4.1.2636.5.1.1.2.4.2.1.1Unsigned32 (1..65535)read-onlycurrent
jnxBgpM2PeerHoldTimeConfigured
OBJECT-TYPE
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (jnxBgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
1.3.6.1.4.1.2636.5.1.1.2.4.2.1.2Unsigned32 (0 | 3..65535)read-onlycurrent
jnxBgpM2PeerKeepAliveConfigured
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in jnxBgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by jnxBgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of jnxBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.2636.5.1.1.2.4.2.1.3Unsigned32 (0 | 1..21845)read-onlycurrent
jnxBgpM2PeerMinASOrigInterval
OBJECT-TYPE
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
1.3.6.1.4.1.2636.5.1.1.2.4.2.1.4Unsigned32 (0..65535)read-onlycurrent
jnxBgpM2PeerMinRouteAdverInterval
OBJECT-TYPE
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.2636.5.1.1.2.4.2.1.5Unsigned32 (0..65535)read-onlycurrent
jnxBgpM2PeerNegotiatedTimersTable
OBJECT-TYPE
Current values of per-peer timers which can be dynamically set in the jnxBgpM2PeerConfiguredTimersTable. Values reflected in this table are the current operational values, after negotiation from values derived from initial configuration or last set from jnxBgpM2PeerConfiguredTimersTable row instances.
1.3.6.1.4.1.2636.5.1.1.2.4.3not-accessiblecurrent
jnxBgpM2PeerNegotiatedTimersEntry
OBJECT-TYPE
Each entry reflects a value of the currently operational, negotiated timers as reflected in the JnxBgpM2PeerNegotiatedTimersEntry.
1.3.6.1.4.1.2636.5.1.1.2.4.3.1not-accessiblecurrent
jnxBgpM2PeerHoldTime
OBJECT-TYPE
The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages are sent and the Hold Timer is not set. At least three (3). This value is the smaller of the value sent by this peer in the OPEN message and jnxBgpM2PeerHoldTimeConfigured for this peer. This value is only defined when the peering session is in the Established state.
1.3.6.1.4.1.2636.5.1.1.2.4.3.1.1Unsigned32 (0 | 3..65535)read-onlycurrent
jnxBgpM2PeerKeepAlive
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with jnxBgpM2PeerHoldTime, it has the same proportion as what jnxBgpM2PeerKeepAliveConfigured has when compared with jnxBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of jnxBgpM2PeerKeepAliveConfigured is zero (0). This value is only defined when the peering session is in the Established state.
1.3.6.1.4.1.2636.5.1.1.2.4.3.1.2Unsigned32 (0 | 1..21845)read-onlycurrent
jnxBgpM2PeerCapabilities
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.5
jnxBgpM2PeerCapsAnnouncedTable
OBJECT-TYPE
This table contains the capabilities that are supported for a given peer.
1.3.6.1.4.1.2636.5.1.1.2.5.1not-accessiblecurrent
jnxBgpM2PeerCapsAnnouncedEntry
OBJECT-TYPE
These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code
1.3.6.1.4.1.2636.5.1.1.2.5.1.1not-accessiblecurrent
jnxBgpM2PeerCapAnnouncedCode
OBJECT-TYPE
The BGP Capability Advertisement Capability Code.
1.3.6.1.4.1.2636.5.1.1.2.5.1.1.1Unsigned32 (0..255)read-onlycurrent
jnxBgpM2PeerCapAnnouncedIndex
OBJECT-TYPE
Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.
1.3.6.1.4.1.2636.5.1.1.2.5.1.1.2Unsigned32 (1..128)read-onlycurrent
jnxBgpM2PeerCapAnnouncedValue
OBJECT-TYPE
The value of the announced capability.
1.3.6.1.4.1.2636.5.1.1.2.5.1.1.3OCTET STRING (SIZE(0..255))read-onlycurrent
jnxBgpM2PeerCapsReceivedTable
OBJECT-TYPE
This table contains the capabilities that are supported for a given peer.
1.3.6.1.4.1.2636.5.1.1.2.5.2not-accessiblecurrent
jnxBgpM2PeerCapsReceivedEntry
OBJECT-TYPE
These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code
1.3.6.1.4.1.2636.5.1.1.2.5.2.1not-accessiblecurrent
jnxBgpM2PeerCapReceivedCode
OBJECT-TYPE
The BGP Capability Advertisement Capability Code.
1.3.6.1.4.1.2636.5.1.1.2.5.2.1.1Unsigned32 (0..255)read-onlycurrent
jnxBgpM2PeerCapReceivedIndex
OBJECT-TYPE
Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.
1.3.6.1.4.1.2636.5.1.1.2.5.2.1.2Unsigned32 (1..128)read-onlycurrent
jnxBgpM2PeerCapReceivedValue
OBJECT-TYPE
The value of the announced capability.
1.3.6.1.4.1.2636.5.1.1.2.5.2.1.3OCTET STRING (SIZE(0..255))read-onlycurrent
jnxBgpM2PeerCounters
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.6
jnxBgpM2PeerCountersTable
OBJECT-TYPE
The counters associated with a BGP Peer.
1.3.6.1.4.1.2636.5.1.1.2.6.1not-accessiblecurrent
jnxBgpM2PeerCountersEntry
OBJECT-TYPE
Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session.
1.3.6.1.4.1.2636.5.1.1.2.6.1.1not-accessiblecurrent
jnxBgpM2PeerInUpdates
OBJECT-TYPE
The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.
1.3.6.1.4.1.2636.5.1.1.2.6.1.1.1Counter32read-onlycurrent
jnxBgpM2PeerOutUpdates
OBJECT-TYPE
The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.
1.3.6.1.4.1.2636.5.1.1.2.6.1.1.2Counter32read-onlycurrent
jnxBgpM2PeerInTotalMessages
OBJECT-TYPE
The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
1.3.6.1.4.1.2636.5.1.1.2.6.1.1.3Counter32read-onlycurrent
jnxBgpM2PeerOutTotalMessages
OBJECT-TYPE
The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
1.3.6.1.4.1.2636.5.1.1.2.6.1.1.4Counter32read-onlycurrent
jnxBgpM2PeerFsmEstablishedTrans
OBJECT-TYPE
The total number of times the BGP FSM transitioned into the established state for this peer.
1.3.6.1.4.1.2636.5.1.1.2.6.1.1.5Counter32read-onlycurrent
jnxBgpM2PrefixCountersTable
OBJECT-TYPE
Additional per-peer, per AFI SAFI counters for prefixes
1.3.6.1.4.1.2636.5.1.1.2.6.2not-accessiblecurrent
jnxBgpM2PrefixCountersEntry
OBJECT-TYPE
Entry containing information about a bgp-peers prefix counters.
1.3.6.1.4.1.2636.5.1.1.2.6.2.1not-accessiblecurrent
jnxBgpM2PrefixCountersAfi
OBJECT-TYPE
The AFI index of the per-peer, per prefix counters
1.3.6.1.4.1.2636.5.1.1.2.6.2.1.1InetAddressTyperead-onlycurrent
jnxBgpM2PrefixCountersSafi
OBJECT-TYPE
The SAFI index of the per-peer, per prefix counters
1.3.6.1.4.1.2636.5.1.1.2.6.2.1.2JnxBgpM2Safiread-onlycurrent
jnxBgpM2PrefixInPrefixes
OBJECT-TYPE
The number of prefixes received from a peer and are stored in the Adj-Ribs-In for that peer.
1.3.6.1.4.1.2636.5.1.1.2.6.2.1.7Gauge32read-onlycurrent
jnxBgpM2PrefixInPrefixesAccepted
OBJECT-TYPE
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are eligible to become active in the Loc-Rib.
1.3.6.1.4.1.2636.5.1.1.2.6.2.1.8Gauge32read-onlycurrent
jnxBgpM2PrefixInPrefixesRejected
OBJECT-TYPE
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are NOT eligible to become active in the Loc-Rib.
1.3.6.1.4.1.2636.5.1.1.2.6.2.1.9Gauge32read-onlycurrent
jnxBgpM2PrefixOutPrefixes
OBJECT-TYPE
The number of prefixes for a peer that are installed in that peers Adj-Ribs-Out.
1.3.6.1.4.1.2636.5.1.1.2.6.2.1.10Gauge32read-onlycurrent
jnxBgpM2PrefixInPrefixesActive
OBJECT-TYPE
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are the active route in the Loc-Rib.
1.3.6.1.4.1.2636.5.1.1.2.6.2.1.11Gauge32read-onlycurrent
jnxBgpM2PeerExtensions
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.7
jnxBgpM2PeerNonCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.7.1
jnxBgpM2PeerRouteReflectionExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.7.1.2796
jnxBgpM2PeerReflectorClientTable
OBJECT-TYPE
Table of route reflection client settings on a per-peer basis.
1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1not-accessiblecurrent
jnxBgpM2PeerReflectorClientEntry
OBJECT-TYPE
Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client.
1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1.1not-accessiblecurrent
jnxBgpM2PeerReflectorClient
OBJECT-TYPE
This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers.
1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1.1.1INTEGER {nonClient(0), client(1), meshedClient(2)}read-onlycurrent
jnxBgpM2PeerASConfederationExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.7.1.3065
jnxBgpM2PeerConfedMemberTable
OBJECT-TYPE
Table of confederation member settings on a per-peer basis.
1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1not-accessiblecurrent
jnxBgpM2PeerConfedMemberEntry
OBJECT-TYPE
Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member.
1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1.1not-accessiblecurrent
jnxBgpM2PeerConfedMember
OBJECT-TYPE
This value indicates whether the given peer is in our confederation or not.
1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1.1.1TruthValueread-onlycurrent
jnxBgpM2PeerCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.7.2
jnxBgpM2PeerConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.8
jnxBgpM2CfgPeerAdminStatusTable
OBJECT-TYPE
Table containing rows for administratively starting and stopping peering sessions.
1.3.6.1.4.1.2636.5.1.1.2.8.1not-accessiblecurrent
jnxBgpM2CfgPeerAdminStatusEntry
OBJECT-TYPE
Entry containing row for administratively starting and stopping peers.
1.3.6.1.4.1.2636.5.1.1.2.8.1.1not-accessiblecurrent
jnxBgpM2CfgPeerAdminStatus
OBJECT-TYPE
This object allows the Manual Stop and Manual Start events to be sent to an activated peering session.
1.3.6.1.4.1.2636.5.1.1.2.8.1.1.1INTEGER {stop(1), start(2)}read-writecurrent
jnxBgpM2CfgPeerNextIndex
OBJECT-TYPE
This object contains the next appropriate value to use as an index for creation of a row instance in in the jnxBgpM2CfgPeerTable. If the number of available entries in the jnxBgpM2CfgPeerTable is exhausted, a retrieval value of this object instance will return 0. A value of 0 may also be returned if the agent is otherwise incapable of jnxBgpM2CfgPeerTable row creation at the time of jnxBgpM2CfgPeerNextIndex retrieval.
1.3.6.1.4.1.2636.5.1.1.2.8.2Integer32 (0..65535)read-onlycurrent
jnxBgpM2CfgPeerTable
OBJECT-TYPE
BGP configuration peer table. This table allows the configuration of the parameters for a session with a BGP peer. +++wayne provide description of how config should be done for a peer per table.
1.3.6.1.4.1.2636.5.1.1.2.8.3not-accessiblecurrent
jnxBgpM2CfgPeerEntry
OBJECT-TYPE
Entry containing information set up by a management entity to configure a connection with a BGP peer.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1not-accessiblecurrent
jnxBgpM2CfgPeerConfiguredVersion
OBJECT-TYPE
The configured version to originally start with this peer. The BGP speaker may permit negotiation to a lower version number of the protocol depending on the set value of jnxBgpM2CfgAllowVersionNegotiation.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.1Unsigned32 (1..255)read-createcurrent
jnxBgpM2CfgAllowVersionNegotiation
OBJECT-TYPE
If set to true, during session establishment with this peer, negotiation to a version lower than that specified in jnxBgpM2CfgPeerConfiguredVersion will be allowed.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.2TruthValueread-createcurrent
jnxBgpM2CfgPeerLocalAddrType
OBJECT-TYPE
The address family of the speakers of this BGP session.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.3InetAddressTyperead-createcurrent
jnxBgpM2CfgPeerLocalAddr
OBJECT-TYPE
The address of the local end of the peering session.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.4InetAddress (SIZE(4..20))read-createcurrent
jnxBgpM2CfgPeerLocalAs
OBJECT-TYPE
Autonomous system represented to peer on peering session initialization. Some implementations of BGP can represent themselves as multiple ASes. These implementations can set this to an alternate autonomous system. If this object is set to zero (0) at the point this row instance is set to active, then the implementation will initialize this session representing itself as the value of jnxBgpM2CfgLocalAs.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.5InetAutonomousSystemNumberread-createcurrent
jnxBgpM2CfgPeerRemoteAddrType
OBJECT-TYPE
The address family of the speakers of the remote BGP session.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.6InetAddressTyperead-createcurrent
jnxBgpM2CfgPeerRemoteAddr
OBJECT-TYPE
The address of the remote end (destination address of peer) for peering session.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.7InetAddress (SIZE(4..20))read-createcurrent
jnxBgpM2CfgPeerRemotePort
OBJECT-TYPE
This is the remote port for the transport connection between the BGP peers. In the case of a transport for which the notion of port is irrelevant, the value of -1 can be defaulted or set.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.8Integer32 (-1 | 0..65535)read-createcurrent
jnxBgpM2CfgPeerRemoteAs
OBJECT-TYPE
Autonomous system number of the remote peer.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.9InetAutonomousSystemNumberread-createcurrent
jnxBgpM2CfgPeerEntryStorageType
OBJECT-TYPE
This object type specifies the intended storage type for the jnxBgpM2CfgPeerEntry row instance.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.10StorageTyperead-createcurrent
jnxBgpM2CfgPeerError
OBJECT-TYPE
This value indicates the current error status of the row denoting the configured error status. If this row is still under creation (has not been activated jnxBgpM2CfgPeerRowEntryStatus), then this instance will be set to not-activated (1). At the point that the row is activated, jnxBgpM2CfgPeerError will reflect the error status of the row data itself. If there is another session already activated with the same local and remote addresses as denoted by {jnxBgpM2CfgPeerLocalAddrType, jnxBgpM2CfgPeerLocalAddr, jnxBgpM2CfgPeerRemoteAddr, jnxBgpM2CfgPeerRemotePort}, then the value of this will be set to err-duplicate-peering-session (2). If this row is associated with a peer session whose initialization has been attempted, the value will be set to activated (3) (and, jnxBgpM2PeerCfgPeerEntry will be set to the row instance of the entry in the jnxBgpM2PeerTable which reflects the state of the peering session). Note that this object only reflects the error as a function of the attempted activation of this row as containing data for a bgp peering session. The actual state of the session at the point of any protocol exchange or session state machine initiation is reflected in the jnxBgpM2PeerTable row instance (as reflected through jnxBgpM2CfgPeerPeerEntry) associated with this row instance.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.11INTEGER {unknown(0), notActivated(1), errDuplicatePeeringSession(2), activated(3)}read-onlycurrent
jnxBgpM2CfgPeerBgpPeerEntry
OBJECT-TYPE
Upon activation of the session data contained in this row instance, this object points to an instance of a row within the jnxBgpM2PeerTable reflecting the session in its initializing or operational state. Retrieval of this column instance will always yield a value of {0.0} unless the session has successfully been activated (via jnxBgpM2CfgPeerRowEntryStatus). Such row instances will always have a value of jnxBgpM2CfgPeerError which is activated (3).
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.12RowPointerread-onlycurrent
jnxBgpM2CfgPeerRowEntryStatus
OBJECT-TYPE
This object type is used to control creation, activation, and deletion of this row instance.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.13RowStatusread-createcurrent
jnxBgpM2CfgPeerIndex
OBJECT-TYPE
Uniquely identifies an instance of a peer row, as an element of configuration.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.14Integer32 (1..65535)not-accessiblecurrent
jnxBgpM2CfgPeerStatus
OBJECT-TYPE
This specifies the state of the peering session upon activation. If disabled, the FSM is in the halted state and no Automatic Start events are generated. If enabled, the FSM is in the running state and Automatic Start events may be generated.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.15INTEGER {halted(1), running(2)}read-createcurrent
jnxBgpM2CfgPeerRoutingInstance
OBJECT-TYPE
Routing instance index.
1.3.6.1.4.1.2636.5.1.1.2.8.3.1.16Unsigned32read-createcurrent
jnxBgpM2CfgPeerAuthTable
OBJECT-TYPE
Table contain per peer configuration for BGP Authentication.
1.3.6.1.4.1.2636.5.1.1.2.8.4not-accessiblecurrent
jnxBgpM2CfgPeerAuthEntry
OBJECT-TYPE
Entry containing information about a peer's BGP Authentication configuration.
1.3.6.1.4.1.2636.5.1.1.2.8.4.1not-accessiblecurrent
jnxBgpM2CfgPeerAuthEnabled
OBJECT-TYPE
This value is true if BGP Authentication is enabled for this peer. This is the authentication mechanism documented in the base BGP specification, not the MD5 session protection mechanism.
1.3.6.1.4.1.2636.5.1.1.2.8.4.1.1TruthValueread-createcurrent
jnxBgpM2CfgPeerAuthCode
OBJECT-TYPE
The authentication code for the BGP Authentication mechanism.
1.3.6.1.4.1.2636.5.1.1.2.8.4.1.2Unsigned32 (0..255)read-createcurrent
jnxBgpM2CfgPeerAuthValue
OBJECT-TYPE
The authentication payload for the BGP authentication mechanism. This value has semantic meaning within the context of the authentication code.
1.3.6.1.4.1.2636.5.1.1.2.8.4.1.3OCTET STRING (SIZE(0..252))read-createcurrent
jnxBgpM2CfgPeerTimersTable
OBJECT-TYPE
Table for configuration of per-peer timers.
1.3.6.1.4.1.2636.5.1.1.2.8.5not-accessiblecurrent
jnxBgpM2CfgPeerTimersEntry
OBJECT-TYPE
Entry containing per-peer timer configuration.
1.3.6.1.4.1.2636.5.1.1.2.8.5.1not-accessiblecurrent
jnxBgpM2CfgPeerConnectRetryInterval
OBJECT-TYPE
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
1.3.6.1.4.1.2636.5.1.1.2.8.5.1.1Unsigned32 (1..65535)read-createcurrent
jnxBgpM2CfgPeerHoldTimeConfigured
OBJECT-TYPE
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (jnxBgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
1.3.6.1.4.1.2636.5.1.1.2.8.5.1.2Unsigned32 (0 | 3..65535)read-createcurrent
jnxBgpM2CfgPeerKeepAliveConfigured
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in jnxBgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by jnxBgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of jnxBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.2636.5.1.1.2.8.5.1.3Unsigned32 (0 | 1..21845)read-createcurrent
jnxBgpM2CfgPeerMinASOrigInterval
OBJECT-TYPE
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
1.3.6.1.4.1.2636.5.1.1.2.8.5.1.4Unsigned32 (0..65535)read-createcurrent
jnxBgpM2CfgPeerMinRouteAdverInter
OBJECT-TYPE
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.2636.5.1.1.2.8.5.1.5Unsigned32 (0..65535)read-createcurrent
jnxBgpM2CfgPeerExtensions
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.8.6
jnxBgpM2CfgPeerNonCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.8.6.1
jnxBgpM2CfgPeerRouteReflectionExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796
jnxBgpM2CfgPeerReflectorClientTable
OBJECT-TYPE
Table of route reflection client settings on a per-peer basis.
1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1not-accessiblecurrent
jnxBgpM2CfgPeerReflectorClientEntry
OBJECT-TYPE
Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client.
1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1.1not-accessiblecurrent
jnxBgpM2CfgPeerReflectorClient
OBJECT-TYPE
This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers.
1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1.1.1INTEGER {nonClient(0), client(1), meshedClient(2)}read-createcurrent
jnxBgpM2CfgPeerASConfederationExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065
jnxBgpM2CfgPeerConfedMemberTable
OBJECT-TYPE
Table of confederation member settings on a per-peer basis.
1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1not-accessiblecurrent
jnxBgpM2CfgPeerConfedMemberEntry
OBJECT-TYPE
Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member.
1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1.1not-accessiblecurrent
jnxBgpM2CfgPeerConfedMember
OBJECT-TYPE
This value indicates whether the given peer is in our confederation or not.
1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1.1.1TruthValueread-createcurrent
jnxBgpM2CfgPeerCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.2.8.6.2
jnxBgpM2Rib
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.3
jnxBgpM2NlriTable
OBJECT-TYPE
The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents the Adj-Ribs-In. The route where jnxBgpM2NlriBest is TRUE represents, for this NLRI, the route that is installed in the LocRib from the Adj-Ribs-In.
1.3.6.1.4.1.2636.5.1.1.3.1not-accessiblecurrent
jnxBgpM2NlriEntry
OBJECT-TYPE
Information about a path to a network.
1.3.6.1.4.1.2636.5.1.1.3.1.1not-accessiblecurrent
jnxBgpM2NlriIndex
OBJECT-TYPE
This index allows for multiple instances of a base prefix for a certain AFI SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single route instance. 2. Allow for extensions which extend the NLRI field to send the same prefix while utilizing other extension specific information. An example of this is RFC 3107 - Carrying MPLS labels in BGP.
1.3.6.1.4.1.2636.5.1.1.3.1.1.1Unsigned32read-onlycurrent
jnxBgpM2NlriAfi
OBJECT-TYPE
The address family of the prefix for this NLRI.
1.3.6.1.4.1.2636.5.1.1.3.1.1.2InetAddressTyperead-onlycurrent
jnxBgpM2NlriSafi
OBJECT-TYPE
The subsequent address family of the prefix for this NLRI
1.3.6.1.4.1.2636.5.1.1.3.1.1.3JnxBgpM2Safiread-onlycurrent
jnxBgpM2NlriPrefix
OBJECT-TYPE
An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by jnxBgpM2PathAttrAddrPrefixLen. Any bits beyond the length specified by jnxBgpM2PathAttrAddrPrefixLen are zeroed.
1.3.6.1.4.1.2636.5.1.1.3.1.1.4InetAddress (SIZE(4..20))read-onlycurrent
jnxBgpM2NlriPrefixLen
OBJECT-TYPE
Length in bits of the address prefix in the Network Layer Reachability Information field.
1.3.6.1.4.1.2636.5.1.1.3.1.1.5InetAddressPrefixLengthread-onlycurrent
jnxBgpM2NlriBest
OBJECT-TYPE
An indication of whether or not this route was chosen as the best BGP4 route.
1.3.6.1.4.1.2636.5.1.1.3.1.1.6TruthValueread-onlycurrent
jnxBgpM2NlriCalcLocalPref
OBJECT-TYPE
The degree of preference calculated by the receiving BGP4 speaker for an advertised route.
1.3.6.1.4.1.2636.5.1.1.3.1.1.7Unsigned32read-onlycurrent
jnxBgpM2PathAttrIndex
OBJECT-TYPE
This value is a unique index for the per-NLRI entry in the jnxBgpM2PeerAttrTable. It is assigned by the agent at the point of creation of the jnxBgpM2PeerAttrTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2PeerAttrIndex row instance values across rows of the jnxBgpM2PeerAttrTable. It is used to provide an index structure for other tables whose data is logically per-peer, per-NLRI.
1.3.6.1.4.1.2636.5.1.1.3.1.1.8Unsigned32read-onlycurrent
jnxBgpM2NlriOpaqueType
OBJECT-TYPE
This object enumerates the type of the row that is pointed to in the table row jnxBgpM2NlriOpaquePointer instance, if jnxBgpM2NlriOpaquePointer is in fact not a zero length. jnxBgpM2NlriOpaqueType is necessary since the data referenced by jnxBgpM2NlriOpaquePointer is opaque to BGP. For example, in the case of RFC 3107, the label stack that is pointed to may occur in the mplsLabelStackTable from the MPLS-LSR-MIB, and the instance value of jnxBgpM2NlriOpaqueType would be bgpMplsLabelStack(1).
1.3.6.1.4.1.2636.5.1.1.3.1.1.9INTEGER {none(0), bgpMplsLabelStack(1)}read-onlycurrent
jnxBgpM2NlriOpaquePointer
OBJECT-TYPE
Pointer to a row that decomposes the data that is opaque to the BGP MIB but is sent in the NLRI. This RowPointer has zero (0) length data instance if jnxBgpM2NlriOpaqueType is none.
1.3.6.1.4.1.2636.5.1.1.3.1.1.10RowPointerread-onlycurrent
jnxBgpM2AdjRibsOutTable
OBJECT-TYPE
This table contains on a per-peer basis one or more routes from the jnxBgpM2NlriTable that have been placed in this peer's Adj-Ribs-Out.
1.3.6.1.4.1.2636.5.1.1.3.2not-accessiblecurrent
jnxBgpM2AdjRibsOutEntry
OBJECT-TYPE
List of BGP routes that have been placed into a peer's Adj-Ribs-Out.
1.3.6.1.4.1.2636.5.1.1.3.2.1not-accessiblecurrent
jnxBgpM2AdjRibsOutIndex
OBJECT-TYPE
Certain extensions to BGP permit multiple instance of a per afi, per safi prefix to be advertised to a peer. This object allows the enumeration of them.
1.3.6.1.4.1.2636.5.1.1.3.2.1.1Unsigned32read-onlycurrent
jnxBgpM2AdjRibsOutRoute
OBJECT-TYPE
This object points to the route in the jnxBgpM2NlriTable that corresponds to the entry in the peer's Adj-Rib-Out. Outgoing route maps are not reflected at this point as those are part of the Update-Send process.
1.3.6.1.4.1.2636.5.1.1.3.2.1.2RowPointerread-onlycurrent
jnxBgpM2PathAttrCount
OBJECT-TYPE
The number of entries in the jnxBgpM2PathAttrTable.
1.3.6.1.4.1.2636.5.1.1.3.3Counter32read-onlycurrent
jnxBgpM2PathAttrTable
OBJECT-TYPE
Provides per advertised network-prefix attribute data, as advertised over a peering session.
1.3.6.1.4.1.2636.5.1.1.3.4not-accessiblecurrent
jnxBgpM2PathAttrEntry
OBJECT-TYPE
Each entry contains data about a given network prefix, per-prefix and per-advertising peer.
1.3.6.1.4.1.2636.5.1.1.3.4.1not-accessiblecurrent
jnxBgpM2PathAttrOrigin
OBJECT-TYPE
The ultimate origin of the path information.
1.3.6.1.4.1.2636.5.1.1.3.4.1.1INTEGER {igp(1), egp(2), incomplete(3)}read-onlycurrent
jnxBgpM2PathAttrNextHopAddrType
OBJECT-TYPE
The address family of the address for the border router that should be used to access the destination network.
1.3.6.1.4.1.2636.5.1.1.3.4.1.2InetAddressTyperead-onlycurrent
jnxBgpM2PathAttrNextHop
OBJECT-TYPE
The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of the prefix in this row. Note that for RFC2545 style double nexthops, this object will always contain the global scope nexthop. jnxBgpM2LinkLocalNextHopTable will contain the linklocal scope nexthop. In the case that the mechanism documented in draft-kato-bgp-ipv6-link-local-00.txt is used and only a link local nexthop has been sent, , jnxBgpM2LinkLocalNextHopPresent will be false and jnxBgpM2PathAttrNextHop will contain the link local nexthop.
1.3.6.1.4.1.2636.5.1.1.3.4.1.3InetAddress (SIZE(4..20))read-onlycurrent
jnxBgpM2PathAttrMedPresent
OBJECT-TYPE
Whether or not the MED value is present. If it is not present, the jnxBgpM2PathAttrMed object has no useful value and should be set to 0.
1.3.6.1.4.1.2636.5.1.1.3.4.1.4TruthValueread-onlycurrent
jnxBgpM2PathAttrMed
OBJECT-TYPE
This metric is used to discriminate between multiple exit points to an adjacent autonomous system.
1.3.6.1.4.1.2636.5.1.1.3.4.1.5Unsigned32read-onlycurrent
jnxBgpM2PathAttrLocalPrefPresent
OBJECT-TYPE
Whether or not the LocalPref value is present. If it is not present, the jnxBgpM2PathAttrLocalPref object has no useful value and should be set to 0.
1.3.6.1.4.1.2636.5.1.1.3.4.1.6TruthValueread-onlycurrent
jnxBgpM2PathAttrLocalPref
OBJECT-TYPE
The originating BGP4 speakers degree of preference for an advertised route.
1.3.6.1.4.1.2636.5.1.1.3.4.1.7Unsigned32read-onlycurrent
jnxBgpM2PathAttrAtomicAggregate
OBJECT-TYPE
When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific.
1.3.6.1.4.1.2636.5.1.1.3.4.1.8INTEGER {atomicAggregatePresent(1), atomicAggregateMissing(2)}read-onlycurrent
jnxBgpM2PathAttrAggregatorAS
OBJECT-TYPE
The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.
1.3.6.1.4.1.2636.5.1.1.3.4.1.9InetAutonomousSystemNumberread-onlycurrent
jnxBgpM2PathAttrAggregatorAddr
OBJECT-TYPE
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
1.3.6.1.4.1.2636.5.1.1.3.4.1.10JnxBgpM2Identifierread-onlycurrent
jnxBgpM2AsPathCalcLength
OBJECT-TYPE
This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection.
1.3.6.1.4.1.2636.5.1.1.3.4.1.11Unsigned32read-onlycurrent
jnxBgpM2AsPathString
OBJECT-TYPE
This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability.
1.3.6.1.4.1.2636.5.1.1.3.4.1.12SnmpAdminStringread-onlycurrent
jnxBgpM2AsPathIndex
OBJECT-TYPE
This value is a unique index for the decomposed AS Path in the jnxBgpM2AsPathTable. It is assigned by the agent at the point of creation of the jnxBgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2AsPathIndex row instance values across rows of the jnxBgpM2AsPathTable.
1.3.6.1.4.1.2636.5.1.1.3.4.1.13Unsigned32read-onlycurrent
jnxBgpM2AsPath4byteTable
OBJECT-TYPE
This table is present for BGP speakers that support the AS 4byte specification and are functioning as a router between 2-byte and 4-byte AS space.
1.3.6.1.4.1.2636.5.1.1.3.5not-accessiblecurrent
jnxBgpM2AsPath4byteEntry
OBJECT-TYPE
Each row contains the information for the AS 4-byte extension's NEW_AS_PATH and NEW_AGGREGATOR attributes.
1.3.6.1.4.1.2636.5.1.1.3.5.1not-accessiblecurrent
jnxBgpM2AsPath4bytePathPresent
OBJECT-TYPE
This value may only be true if this BGP Speaker is functioning as a router between ASs that are in 2-byte and 4-byte AS space. If this value is true, then the NEW_AS_PATH attributes are present and the 4-byte versions of the appropriate path attributes are in this row. If this value is false, then the following values will be present in the row: jnxBgpM2PathAttrAggregatorAS - zero (0). jnxBgpM2AsPathCalcLength - zero (0). jnxBgpM2AsPathString - zero (0) length string. jnxBgpM2AsPathIndex - zero (0).
1.3.6.1.4.1.2636.5.1.1.3.5.1.1TruthValueread-onlycurrent
jnxBgpM2AsPath4byteAggregatorAS
OBJECT-TYPE
The NEW_AGGREGATOR AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.
1.3.6.1.4.1.2636.5.1.1.3.5.1.2InetAutonomousSystemNumberread-onlycurrent
jnxBgpM2AsPath4byteCalcLength
OBJECT-TYPE
This value represents the calculated length of the NEW_AS_PATH according to the rules of the BGP specification. This value is used in route selection.
1.3.6.1.4.1.2636.5.1.1.3.5.1.3Unsigned32read-onlycurrent
jnxBgpM2AsPath4byteString
OBJECT-TYPE
This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability.
1.3.6.1.4.1.2636.5.1.1.3.5.1.4SnmpAdminStringread-onlycurrent
jnxBgpM2AsPath4byteIndex
OBJECT-TYPE
This value is a unique index for the decomposed AS Path in the jnxBgpM2AsPathTable. It is assigned by the agent at the point of creation of the jnxBgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2AsPathIndex row instance values across rows of the jnxBgpM2AsPathTable.
1.3.6.1.4.1.2636.5.1.1.3.5.1.5Unsigned32read-onlycurrent
jnxBgpM2AsPathTable
OBJECT-TYPE
The BGP-4 Path Attribute AS Path Table contains the per network path (NLRI) AS PATH data received from the advertising BGP peer.
1.3.6.1.4.1.2636.5.1.1.3.6not-accessiblecurrent
jnxBgpM2AsPathEntry
OBJECT-TYPE
Information about an AS path provided with a path to a network.
1.3.6.1.4.1.2636.5.1.1.3.6.1not-accessiblecurrent
jnxBgpM2AsPathSegmentIndex
OBJECT-TYPE
A per-AS path segment index. This will index a set of autonomous systems in an AS path which are part of the same sequence or set (as determined by the row value of jnxBgpM2AsPathType, which should be the same value for each jnxBgpM2AsPathTable entry indexed by the same (jnxBgpM2PathAttrIndex, jnxBgpM2AsPathIndex) pair).
1.3.6.1.4.1.2636.5.1.1.3.6.1.1Unsigned32read-onlycurrent
jnxBgpM2AsPathElementIndex
OBJECT-TYPE
A per-AS element index. This will index a particular AS within a sequence or set of autonomous systems in an AS path.
1.3.6.1.4.1.2636.5.1.1.3.6.1.2Unsigned32read-onlycurrent
jnxBgpM2AsPathType
OBJECT-TYPE
The type of sequence in which this asPath was advertised as an attribute. Note that all asPath row instances for a given (jnxBgpM2PathAttrIndex, jnxBgpM2AsPathIndex) index pair will have their jnxBgpM2AsPathType set to the same value. The values for jnxBgpM2AsPathType are interpreted as defined in the base BGP document and the BGP AS Confederations document.
1.3.6.1.4.1.2636.5.1.1.3.6.1.3INTEGER {asSet(1), asSequence(2), confedSequence(3), confedSet(4)}read-onlycurrent
jnxBgpM2AsPathElementValue
OBJECT-TYPE
An AS value for an AS the related NLRI traversed in the propagation of its advertisement. This value is to be interpreted in the context of the sequence implied by jnxBgpM2AsPathIndex and jnxBgpM2AsPathType (and, in sequence of the other table rows with the same value of jnxBgpM2PathAttrIndex and jnxBgpM2AsPathIndex).
1.3.6.1.4.1.2636.5.1.1.3.6.1.4InetAutonomousSystemNumberread-onlycurrent
jnxBgpM2PathAttrUnknownTable
OBJECT-TYPE
The BGP-4 Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the local BGP implementation or not otherwise capable of being returned from this agent. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of such unknown attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).
1.3.6.1.4.1.2636.5.1.1.3.7not-accessiblecurrent
jnxBgpM2PathAttrUnknownEntry
OBJECT-TYPE
Information about an unknown attribute provided with a path to a network.
1.3.6.1.4.1.2636.5.1.1.3.7.1not-accessiblecurrent
jnxBgpM2PathAttrUnknownIndex
OBJECT-TYPE
An integer index for a row in this table.
1.3.6.1.4.1.2636.5.1.1.3.7.1.1Unsigned32read-onlycurrent
jnxBgpM2PathAttrUnknownType
OBJECT-TYPE
The attribute type advertised with this unknown attribute by the peer.
1.3.6.1.4.1.2636.5.1.1.3.7.1.2Unsigned32read-onlycurrent
jnxBgpM2PathAttrUnknownValue
OBJECT-TYPE
Value of path attribute not understood by the base BGP-4 document. Octets beyond the maximum size, if any, are not recorded by this row object.
1.3.6.1.4.1.2636.5.1.1.3.7.1.3OCTET STRING (SIZE(0..4070))read-onlycurrent
jnxBgpM2PathAttrExtensions
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.3.8
jnxBgpM2PathAttrNonCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.3.8.1
jnxBgpM2PathAttrCommunityExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.3.8.1.1997
jnxBgpM2PathAttrCommTable
OBJECT-TYPE
The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).
1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1not-accessiblecurrent
jnxBgpM2PathAttrCommEntry
OBJECT-TYPE
Information about a community association provided with a path to a network.
1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1not-accessiblecurrent
jnxBgpM2PathAttrCommIndex
OBJECT-TYPE
An integer index for a row in this table.
1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1.1Unsigned32read-onlycurrent
jnxBgpM2PathAttrCommValue
OBJECT-TYPE
A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics.
1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1.2JnxBgpM2Communityread-onlycurrent
jnxBgpM2LinkLocalNextHopTable
OBJECT-TYPE
Table of link local nexthops as sent by RFC 2545 for IPv6 BGP Speakers.
1.3.6.1.4.1.2636.5.1.1.3.8.1.2545not-accessiblecurrent
jnxBgpM2LinkLocalNextHopEntry
OBJECT-TYPE
Entry containing the link-local nexthops as sent by a BGP speaker running RFC 2545 extensions for double-nexthops.
1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1not-accessiblecurrent
jnxBgpM2LinkLocalNextHopPresent
OBJECT-TYPE
This value is TRUE if and only if the BGP speaker is receiving IPv6 NLRI using the RFC 2545 double nexthop convention and it has received a link local scope nexthop in addition to the global scope nexthop.
1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1.1TruthValueread-onlycurrent
jnxBgpM2LinkLocalNextHop
OBJECT-TYPE
This value contains an IPv6 link local address of InetAddressType of type ipv6z. This value is only present if jnxBgpM2LinkLocalNextHopPresent is true.
1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1.2InetAddress (SIZE(20))read-onlycurrent
jnxBgpM2PathAttrRouteReflectionExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.3.8.1.2796
jnxBgpM2PathAttrOriginatorIdTable
OBJECT-TYPE
Per prefix data pertinent to advertisement of a network prefix through an originator.
1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1not-accessiblecurrent
jnxBgpM2PathAttrOriginatorIdEntry
OBJECT-TYPE
Each entry contains data pertinent to a network prefix as received through its originating BGP route reflector.
1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1.1not-accessiblecurrent
jnxBgpM2PathAttrOriginatorId
OBJECT-TYPE
The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute.
1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1.1.1JnxBgpM2Identifierread-onlycurrent
jnxBgpM2PathAttrClusterTable
OBJECT-TYPE
The BGP-4 Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).
1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2not-accessiblecurrent
jnxBgpM2PathAttrClusterEntry
OBJECT-TYPE
Information about a cluster traversal provided with a path to a network.
1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1not-accessiblecurrent
jnxBgpM2PathAttrClusterIndex
OBJECT-TYPE
An integral index for a row in this table.
1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1.1Unsigned32read-onlycurrent
jnxBgpM2PathAttrClusterValue
OBJECT-TYPE
A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster that the route has traversed. The sequence of this path as received in the route advertisement will be preserved in the sequence of jnxBgpM2PathAttrClusterTable rows (and the jnxBgpM2PathAttrClusterValues in each row) as returned for a given jnxBgpM2PathAttrIndex value, and the monotonically increasing sequence of jnxBgpM2PathAttrClusterIndex values for that jnxBgpM2PathAttrIndex.
1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1.2JnxBgpM2Identifierread-onlycurrent
jnxBgpM2PathAttrExtCommTable
OBJECT-TYPE
The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the extended community membership advertised with a route. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable). XXX JMH - can not assign the OID until an RFC is published.
1.3.6.1.4.1.2636.5.1.1.3.8.1.65001not-accessiblecurrent
jnxBgpM2PathAttrExtCommEntry
OBJECT-TYPE
Information about an extended community association provided with a path to a network.
1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1not-accessiblecurrent
jnxBgpM2PathAttrExtCommIndex
OBJECT-TYPE
An integral index for a row in this table.
1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1.1Unsigned32read-onlycurrent
jnxBgpM2PathAttrExtCommValue
OBJECT-TYPE
A value representing an extended community which was received with the route implied by the jnxBgpM2PathAttr Index value of this row data. There are certain 8-octet long values which could be returned in this columnar row data that carry additional semantics.
1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1.2JnxBgpM2ExtendedCommunityread-onlycurrent
jnxBgpM2PathAttrCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.3.8.2
jnxBgpM2Conformance
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.4
jnxBgpM2MIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.4.1
jnxBgpM2MIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2636.5.1.1.4.2

Notifications

NameOIDStatus
jnxBgpM2Established
NOTIFICATION-TYPE
The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.
1.3.6.1.4.1.2636.5.1.1.1.0.1current
jnxBgpM2BackwardTransition
NOTIFICATION-TYPE
The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.
1.3.6.1.4.1.2636.5.1.1.1.0.2current

Conformance

NameOIDStatus
jnxBgpM2MIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the BGP4 mib.
1.3.6.1.4.1.2636.5.1.1.4.1.1current
jnxBgpM2AuthenticationGroup
OBJECT-GROUP
Objects associated with BGP authentication.
1.3.6.1.4.1.2636.5.1.1.4.2.1current
jnxBgpM2CommunitiesGroup
OBJECT-GROUP
Objects associated with BGP communities.
1.3.6.1.4.1.2636.5.1.1.4.2.2current
jnxBgpM2ExtCommunitiesGroup
OBJECT-GROUP
Objects associated with BGP extended communities.
1.3.6.1.4.1.2636.5.1.1.4.2.3current
jnxBgpM2RouteReflectionGroup
OBJECT-GROUP
Objects associated with BGP route reflection.
1.3.6.1.4.1.2636.5.1.1.4.2.4current
jnxBgpM2AsConfederationGroup
OBJECT-GROUP
Objects associated with BGP confederation membership.
1.3.6.1.4.1.2636.5.1.1.4.2.5current
jnxBgpM2TimersGroup
OBJECT-GROUP
Objects associated with BGP peering timers.
1.3.6.1.4.1.2636.5.1.1.4.2.6current
jnxBgpM2CountersGroup
OBJECT-GROUP
Objects to count discrete events and exchanges on BGP sessions.
1.3.6.1.4.1.2636.5.1.1.4.2.7current
jnxBgpM2CapabilitiesGroup
OBJECT-GROUP
Objects to report capabilities as received on BGP sessions.
1.3.6.1.4.1.2636.5.1.1.4.2.8current
jnxBgpM2AsPathGroup
OBJECT-GROUP
Objects to report AS paths received on BGP NLRIs.
1.3.6.1.4.1.2636.5.1.1.4.2.9current
jnxBgpM2As4byteGroup
OBJECT-GROUP
AS Size objects.
1.3.6.1.4.1.2636.5.1.1.4.2.10current
jnxBgpM2BaseGroup
OBJECT-GROUP
Basic objects in local BGP implementation.
1.3.6.1.4.1.2636.5.1.1.4.2.11current
jnxBgpM2ErrorsGroup
OBJECT-GROUP
Errors received on BGP peering sessions.
1.3.6.1.4.1.2636.5.1.1.4.2.12current
jnxBgpM2PeerGroup
OBJECT-GROUP
Core object types on BGP peering sessions.
1.3.6.1.4.1.2636.5.1.1.4.2.13current
jnxBgpM2PathAttributesGroup
OBJECT-GROUP
Attributes received on BGP peering sessions.
1.3.6.1.4.1.2636.5.1.1.4.2.14current
jnxBgpM2PeerConfigurationGroup
OBJECT-GROUP
Configuration objects for BGP peers.
1.3.6.1.4.1.2636.5.1.1.4.2.15current
jnxBgpM2PeerAuthConfigurationGroup
OBJECT-GROUP
Configuration objects for BGP peers that support authentication.
1.3.6.1.4.1.2636.5.1.1.4.2.16current
jnxBgpM2PeerRouteReflectorCfgGroup
OBJECT-GROUP
Configuration objects for BGP peers that support route reflection.
1.3.6.1.4.1.2636.5.1.1.4.2.17current
jnxBgpM2PeerAsConfederationCfgGroup
OBJECT-GROUP
Configuration objects for BGP peers that support BGP confederations.
1.3.6.1.4.1.2636.5.1.1.4.2.18current
jnxBgpM2MIBNotificationsGroup
NOTIFICATION-GROUP
This group contains objects for notifications supported by this mib module.
1.3.6.1.4.1.2636.5.1.1.4.2.19current
jnxBgpM2Rfc2545Group
OBJECT-GROUP
This group is required for peers that support exchanging of IPv6 NLRI per RFC 2545.
1.3.6.1.4.1.2636.5.1.1.4.2.20current