BAY-STACK-NOTIFICATIONS-MIB
- Registered at
- 1.3.6.1.4.1.45.5.2
- Last updated
- 2014-01-27 00:00
- Organization
- Avaya
- Revisions
- 2014-01-27 00:00, 2013-10-11 00:00, 2013-08-22 00:00, 2013-03-19 00:00, 2012-09-04 00:00, 2012-08-22 00:00, 2012-08-16 00:00, 2012-06-21 00:00, 2012-06-20 00:00, 2011-11-30 00:00, 2010-12-21 00:00, 2009-09-28 00:00, 2008-07-09 00:00, 2008-03-31 00:00, 2007-03-05 00:00, 2006-04-06 00:00, 2006-04-04 00:00, 2005-08-22 00:00, 2005-06-30 00:00, 2005-03-26 00:00, 2004-08-06 00:00, 2004-08-02 00:00, 2004-07-20 00:00, 2003-03-16 00:00
- Namespace
- nortel
- Source file
BAY-STACK-NOTIFICATIONS-MIB- Digest
sha256:db7284dfc8fdd3da4fcd490b8a6373702648194bd5dd5ebb429ccf666d8e490c
Description
Miscellaneous NOTIFICATION definitions for BayStack products.
Contact
Avaya
Imports
| From | Symbols |
|---|---|
| BAY-STACK-MIB | bayStackConfigExpectedStackSize, bayStackUnitConfigIndex |
| IEEE8021-PAE-MIB | dot1xAuthBackendAuthState, dot1xAuthPaeState |
| IF-MIB | InterfaceIndex, ifAdminStatus, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| S5-AGENT-MIB | s5AgSysUsbTargetUnit, s5AgentScriptStatus |
| S5-CHASSIS-MIB | s5ChasComType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION |
| SYNOPTICS-ROOT-MIB | bayStackMibs |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BAY-STACK-MIB BAY-STACK-NOTIFICATIONS-MIB BRIDGE-MIB IANAifType-MIB IEEE8021-PAE-MIB IF-MIB INET-ADDRESS-MIB IPV6-TC P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB S5-AGENT-MIB S5-CHASSIS-MIB S5-ROOT-MIB S5-TCS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC SYNOPTICS-ROOT-MIB TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| bsnObjects OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.2.1 | |||
| bsnEapAccessViolationMacAddress OBJECT-TYPE The MAC address which caused an EAP access violation. | 1.3.6.1.4.1.45.5.2.1.1 | MacAddress | accessible-for-notify | current |
| bsnLoginFailureType OBJECT-TYPE The type of login being attempted when the failure occurred. | 1.3.6.1.4.1.45.5.2.1.2 | INTEGER {telnet(1), ssh(2), web(3), serialConsole(4)} | accessible-for-notify | current |
| bsnLoginFailureAddressType OBJECT-TYPE The address type contained in the associated value of bnsLoginFailureAddress. | 1.3.6.1.4.1.45.5.2.1.3 | InetAddressType | accessible-for-notify | current |
| bsnLoginFailureAddress OBJECT-TYPE The IP address from which the login was attempted when the failure occurred. | 1.3.6.1.4.1.45.5.2.1.4 | InetAddress | accessible-for-notify | current |
| bsnLoginFailureUsername OBJECT-TYPE The username for which the login failure occurred. | 1.3.6.1.4.1.45.5.2.1.5 | SnmpAdminString | accessible-for-notify | current |
| bsnActualStackSize OBJECT-TYPE The actual stack size when a bsnStackConfigurationError notification is generated. | 1.3.6.1.4.1.45.5.2.1.6 | Integer32 (1..8) | accessible-for-notify | current |
| bsnEapUbpFailureIfIndex OBJECT-TYPE The ifIndex of the port for which UBP policies could not be installed. | 1.3.6.1.4.1.45.5.2.1.7 | InterfaceIndex | accessible-for-notify | current |
| bsnEapUbpFailureMacAddress OBJECT-TYPE The MAC address for which UBP policies could not be installed. | 1.3.6.1.4.1.45.5.2.1.8 | MacAddress | accessible-for-notify | current |
| bsnEapUbpFailureRoleString OBJECT-TYPE The role string of the UBP policies which could not be installed. | 1.3.6.1.4.1.45.5.2.1.9 | OCTET STRING (SIZE(0..64)) | accessible-for-notify | current |
| bsnTrialLicenseExpirationTime OBJECT-TYPE The number of days until a feature trial license will expire. A value of 0 means the license has expired. | 1.3.6.1.4.1.45.5.2.1.10 | Integer32 (0..30) | accessible-for-notify | current |
| bsnTrialLicenseExpirationNumber OBJECT-TYPE The number of the license that will expire or that has expired. | 1.3.6.1.4.1.45.5.2.1.11 | Integer32 (1..10) | accessible-for-notify | current |
| bsnEnteredForcedStackModeMAC OBJECT-TYPE The MAC address of a switch which has entered forced stack mode. | 1.3.6.1.4.1.45.5.2.1.12 | MacAddress | accessible-for-notify | current |
| bsnEapRAVErrorMacAddress OBJECT-TYPE The MAC address that was authorized on a port which could not be moved to the Radius-Assigned VLAN. | 1.3.6.1.4.1.45.5.2.1.13 | MacAddress | accessible-for-notify | current |
| bsnEapRAVErrorPort OBJECT-TYPE The ifIndex of the port that could not be moved to the Radius-Assigned VLAN. | 1.3.6.1.4.1.45.5.2.1.14 | InterfaceIndex | accessible-for-notify | current |
| bsnEnteredForcedStackModeAddressType OBJECT-TYPE The address type contained in the associated value of bsnEnteredForcedStackModeAddress. | 1.3.6.1.4.1.45.5.2.1.15 | InetAddressType | accessible-for-notify | current |
| bsnEnteredForcedStackModeAddress OBJECT-TYPE The IP address in use on the switch that entered forced stack mode. | 1.3.6.1.4.1.45.5.2.1.16 | InetAddress | accessible-for-notify | current |
| bsnStackProtectionEvent OBJECT-TYPE This object specifies the Stack Protection events which may occur. cannotJoinStack(1) occurs on a BU (base unit) enabled switch which tries to join an existing operational stack. unitIgnored(2) occurs on an operational stack, when a BU enabled switch tries to join the stack. | 1.3.6.1.4.1.45.5.2.1.17 | INTEGER {cannotJoinStack(1), unitIgnored(2)} | accessible-for-notify | current |
| bsnUSBInfo OBJECT-TYPE The USB module information. | 1.3.6.1.4.1.45.5.2.1.18 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| bsnSFPInfo OBJECT-TYPE The SFP module information. | 1.3.6.1.4.1.45.5.2.1.19 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| bsnAaaUserName OBJECT-TYPE The user name of an AAA user account. | 1.3.6.1.4.1.45.5.2.1.20 | SnmpAdminString (SIZE(10..16)) | accessible-for-notify | current |
| bsnNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.2.2 | |||
| bsnNotifications0 OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.2.2.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| bsnConfigurationSavedToNvram NOTIFICATION-TYPE This notification is generated whenever the device saves its configuration to non-volatile storage. The system should limit the frequency with which this notification is generated, as frequent configuration changes could potentially generate too many of these notifications. How the frequency is limitted is an implementation details, but it is suggested that no more than one notification be generated per minute. | 1.3.6.1.4.1.45.5.2.2.0.1 | current |
| bsnEapAccessViolation NOTIFICATION-TYPE This notification is generated whenever an EAP access violation occurs. | 1.3.6.1.4.1.45.5.2.2.0.2 | current |
| bsnPortSpeedDuplexMismatch NOTIFICATION-TYPE This notification is generated when a speed or duplex mismatch is detected. Once notification has been sent, further notifications may be sent, but it is suggested these be at least 5 minutes apart. | 1.3.6.1.4.1.45.5.2.2.0.3 | current |
| bsnStackManagerReconfiguration NOTIFICATION-TYPE This notification is generated by a stackable system when the stack manager detects a problem with a link between stack members. | 1.3.6.1.4.1.45.5.2.2.0.4 | current |
| bsnLacTrunkUnavailable NOTIFICATION-TYPE This notification is generated when the last trunk is occupied out of a limited number of trunks that can be created. The condition usually occurs because a system has some hardware or software limit on the number of trunks that can be created. | 1.3.6.1.4.1.45.5.2.2.0.5 | current |
| bsnLoginFailure NOTIFICATION-TYPE This notification is generated when an attempt to login to the system fails as a result of an incorrect password. | 1.3.6.1.4.1.45.5.2.2.0.6 | current |
| bsnMLTHealthFailure NOTIFICATION-TYPE This notification is generated when a receiving switch does not receive an expected number of autotopology frames on an MLT in a given time interval from the sending switch(es) on the other end of the MLT. Once notification has been sent, further notifications may be sent, but it is suggested these be at least 5 minutes apart. The ifAdminStatus object reflects the state of the port. The port may be partitioned by the switch or still be active depending on the detection algorithm's control parameters. | 1.3.6.1.4.1.45.5.2.2.0.7 | current |
| bsnTrunkPortDisabledToPreventBroadcastStorm NOTIFICATION-TYPE This notification is generated when an MLT port is disabled as a result of an MLT trunk being disabled. | 1.3.6.1.4.1.45.5.2.2.0.8 | current |
| bsnLacPortDisabledToPreventBroadcastStorm NOTIFICATION-TYPE This notification is generated when a LAG port that was port of a trunk is disabled as a result of the LAC setting on the port being turned off. | 1.3.6.1.4.1.45.5.2.2.0.9 | current |
| bsnTrunkPortEnabledToPreventBroadcastStorm NOTIFICATION-TYPE This notification is generated when an MLT port is enabled as a result of an MLT trunk being disabled. | 1.3.6.1.4.1.45.5.2.2.0.10 | current |
| bsnLacPortDisabledDueToLossOfVLACPDU NOTIFICATION-TYPE Generated when a port is disabled due to the loss of a VLACP PDU. | 1.3.6.1.4.1.45.5.2.2.0.11 | current |
| bsnLacPortEnabledDueToReceiptOfVLACPDU NOTIFICATION-TYPE Generated when a port is enabled due to receipt of a VLACP PDU. | 1.3.6.1.4.1.45.5.2.2.0.12 | current |
| bsnStackConfigurationError NOTIFICATION-TYPE This notification is generated when the expected size of a stack is not equal to the actual size of the stack. | 1.3.6.1.4.1.45.5.2.2.0.13 | current |
| bsnEapUbpFailure NOTIFICATION-TYPE This notification is generated when installation of a UBP policy fails following EAP authentication. | 1.3.6.1.4.1.45.5.2.2.0.14 | current |
| bsnTrialLicenseExpiration NOTIFICATION-TYPE This notification is generated to indicate that a trial license is going to expire soon, or has already expired. | 1.3.6.1.4.1.45.5.2.2.0.15 | current |
| bsnEnteredForcedStackMode NOTIFICATION-TYPE This notification is generated to indicate that a switch has entered forced stack mode. | 1.3.6.1.4.1.45.5.2.2.0.16 | current |
| bsnTemperatureExceeded NOTIFICATION-TYPE This notification is generated when the temperature of a chassis component has exceeded some threshold. The instance of s5ChasComType included in the notification identifies the component. | 1.3.6.1.4.1.45.5.2.2.0.17 | current |
| bsnEapRAVError NOTIFICATION-TYPE This notification indicates that an Eap client MAC address was authorized on a port, but the port could not be moved to the Radius-Assigned VLAN. | 1.3.6.1.4.1.45.5.2.2.0.18 | current |
| bsnEapRateLimitExceeded NOTIFICATION-TYPE This notification indicates that incoming traffic on a port exceeded the rate limit settings on that port. | 1.3.6.1.4.1.45.5.2.2.0.19 | current |
| bsnSystemUp365Days NOTIFICATION-TYPE This notification indicates that the system has been up for 365 days. In stack configuration, bayStackUnitConfigIndex specifies the unit number. For a standalone unit bayStackUnitConfigIndex is always 1. | 1.3.6.1.4.1.45.5.2.2.0.20 | current |
| bsnUSBInsertion NOTIFICATION-TYPE This notification is triggered when an USB device is inserted. In stack configuration, s5AgSysUsbTargetUnit specifies the unit number. For standalone, s5AgSysUsbTargetUnit is always 0. | 1.3.6.1.4.1.45.5.2.2.0.21 | current |
| bsnUSBRemoval NOTIFICATION-TYPE This notification is triggered when an USB device is removed. In stack configuration, s5AgSysUsbTargetUnit specifies the unit number. For standalone, s5AgSysUsbTargetUnit is always 0. | 1.3.6.1.4.1.45.5.2.2.0.22 | current |
| bsnSFPInsertion NOTIFICATION-TYPE This notification is triggered when an SFP module is inserted. | 1.3.6.1.4.1.45.5.2.2.0.23 | current |
| bsnSFPRemoval NOTIFICATION-TYPE This notification is triggered when an SFP module is removed. | 1.3.6.1.4.1.45.5.2.2.0.24 | current |
| bsnROPasswordExpired NOTIFICATION-TYPE This notification is sent when RO password expired. | 1.3.6.1.4.1.45.5.2.2.0.25 | current |
| bsnRWPasswordExpired NOTIFICATION-TYPE This notification is sent when RW password expired. | 1.3.6.1.4.1.45.5.2.2.0.26 | current |
| bsnStackProtection NOTIFICATION-TYPE This notification is sent when a stack protection event occurs. The event type is specified by the bsnStackProtectionEvent object. | 1.3.6.1.4.1.45.5.2.2.0.27 | current |
| bsnRunScripts NOTIFICATION-TYPE This notification is sent when a script has been run. It indicates whether the execution was successful or not. | 1.3.6.1.4.1.45.5.2.2.0.28 | current |
| bsnAaaUserAccountNotUsed NOTIFICATION-TYPE A bsnAaaUserAccountNotUsed trap signifies that a user account has never been used during a time interval. | 1.3.6.1.4.1.45.5.2.2.0.29 | current |
| bsnAaaAlreadyConnected NOTIFICATION-TYPE A bsnAaaAlreadyConnected trap signifies that a user is already connected while he attempts to connect again. | 1.3.6.1.4.1.45.5.2.2.0.30 | current |
| bsnAaaIncorrectLogOnThresholdExceeded NOTIFICATION-TYPE A bsnAaaIncorrectLogOnThresholdExceeded trap signifies that the threshold for incorrect user-entered information is exceeded. | 1.3.6.1.4.1.45.5.2.2.0.31 | current |
| bsnAaaMaxNoOfSessionsExceeded NOTIFICATION-TYPE A bsnAaaMaxNoOfSessionsExceeded trap signifies that the maxim number of current sessions for an AAA user account is exceeded. | 1.3.6.1.4.1.45.5.2.2.0.32 | current |
| bsnAuditUnsentMessages NOTIFICATION-TYPE A bsnAuditUnsentMessages trap signifies that the number of audit unsent messages has reached 50% from the total capacity. | 1.3.6.1.4.1.45.5.2.2.0.33 | current |
| bsnAuditRecordEventsFailure NOTIFICATION-TYPE A bsnAuditRecordEventsFailure trap signifies that security log fails to record the events that are required to be recorded. | 1.3.6.1.4.1.45.5.2.2.0.34 | current |
| bsnAuditStartUpTrap NOTIFICATION-TYPE A bsnAuditStartUpTrap trap signifies that the audit function starts up. | 1.3.6.1.4.1.45.5.2.2.0.35 | current |
| bsnAuditShutDownTrap NOTIFICATION-TYPE A bsnAuditStartUpTrap trap signifies that the audit function shuts down. | 1.3.6.1.4.1.45.5.2.2.0.36 | current |