BAY-STACK-EAPOL-EXTENSION-MIB
- Registered at
- 1.3.6.1.4.1.45.5.3
- Last updated
- 2013-03-04 00:00
- Organization
- Avaya
- Revisions
- 2013-03-04 00:00, 2013-02-08 00:00, 2013-01-17 00:00, 2012-11-27 00:00, 2012-11-05 00:00, 2012-08-01 00:00, 2012-05-23 00:00, 2012-03-01 00:00, 2011-10-06 00:00, 2011-07-22 00:00, 2011-06-26 00:00, 2010-09-07 00:00, 2010-01-25 00:00, 2010-01-11 00:00, 2008-11-11 00:00, 2008-07-03 00:00, 2008-06-30 00:00, 2008-04-14 00:00, 2008-03-28 00:00, 2007-11-09 00:00, 2006-11-01 00:00, 2006-05-24 00:00, 2005-06-27 00:00, 2005-03-10 00:00, 2005-02-17 00:00, 2004-11-11 00:00, 2004-08-31 00:00, 2004-07-20 00:00, 2003-09-18 00:00
- Namespace
- nortel
- Source file
BAY-STACK-EAPOL-EXTENSION-MIB- Digest
sha256:00333db1a50df622d4609366eb9fec5e77e337e28df166debe42c478b614a018
Description
BayStack EAPOL Extension MIB Copyright 2003-2010 Avaya All rights reserved. This Avaya SNMP Management Information Base Specification (Specification) embodies Avaya's confidential and proprietary intellectual property. Avaya retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Avaya makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Contact
Avaya
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanId, VlanIdOrAny, VlanIdOrNone |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| SYNOPTICS-ROOT-MIB | bayStackMibs |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BAY-STACK-EAPOL-EXTENSION-MIB BRIDGE-MIB IANAifType-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC SYNOPTICS-ROOT-MIB TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| bseeObjects OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.3.1 | |||
| bseeUserBasedPoliciesEnabled OBJECT-TYPE This object indicates whether EAPOL User-based policies are enabled or disabled. | 1.3.6.1.4.1.45.5.3.1.1 | TruthValue | read-write | current |
| bseeGuestVlanId OBJECT-TYPE This object specifies the ID of the global default guest VLAN. This VLAN is used for ports which do not have a configured guest VLAN. Access to the guest VLAN is allowed for MAC addresses before EAP authentication has been performed. However, if the value of bseeGuestVlanEnabled is false(2), then access to the guest VLAN is not allowed for ports that do not have a configured guest VLAN. | 1.3.6.1.4.1.45.5.3.1.2 | VlanId | read-write | current |
| bseeRemediationVlanId OBJECT-TYPE This object specifies the ID of the remediation VLAN. If EAP authentication fails for a port, MAC addresses on that port are restricted to access only the remediation VLAN. However, if the value of bseeRemediationVlanEnabled is false(2), then access is not allowed at all for a port when EAP authentication fails. | 1.3.6.1.4.1.45.5.3.1.3 | VlanId | read-write | current |
| bseeMaximumEapClientMacs OBJECT-TYPE This object specifies the global maximum number of EAP authenticated MAC addresses allowed. | 1.3.6.1.4.1.45.5.3.1.4 | Integer32 (1..800) | read-write | current |
| bseeMaximumNonEapClientMacs OBJECT-TYPE This object specifies the global maximum number of non-EAP authenticated MAC addresses allowed. | 1.3.6.1.4.1.45.5.3.1.5 | Integer32 (1..800) | read-write | current |
| bseeGuestVlanEnabled OBJECT-TYPE This object specifies whether access to the global default guest VLAN is allowed. | 1.3.6.1.4.1.45.5.3.1.6 | TruthValue | read-write | current |
| bseeRemediationVlanEnabled OBJECT-TYPE This object specifies whether access to the remediation VLAN is allowed. | 1.3.6.1.4.1.45.5.3.1.7 | TruthValue | read-write | current |
| bseeMultiHostAllowNonEapClient OBJECT-TYPE This object controls whether non-EAP clients (MAC addresses) are allowed. This is the system-wide setting. The associated per-port setting (bseePortConfigMultiHostAllowNonEapClient) must also be true for non-EAP clients to be allowed on a particular port. | 1.3.6.1.4.1.45.5.3.1.8 | TruthValue | read-write | current |
| bseeMultiHostRadiusAuthNonEapClient OBJECT-TYPE This object controls whether non-EAP clients (MAC addresses) may be authenticated using RADIUS. This is the system-wide setting. The associated per-port setting (bseePortConfigMultiHostRadiusAuthNonEapClient) must also be true for non-EAP clients to be authenticated using RADIUS on a particular port. | 1.3.6.1.4.1.45.5.3.1.9 | TruthValue | read-write | current |
| bseeMultiHostSingleAuthEnabled OBJECT-TYPE This object controls whether non-EAP clients (MAC addresses) may be automatically authenticated on a port after an EAP client has been authenticated (known as MHSA). This is the system-wide setting. The associated per-port setting must also be true for non-EAP clients to be authenticated in this way. | 1.3.6.1.4.1.45.5.3.1.10 | TruthValue | read-write | current |
| bseeUserBasedPoliciesFilterOnMac OBJECT-TYPE This object indicates whether the EAPOL User-based policy filters that are installed on ports will be dynamically modified to include the MAC address for which the filters are installed. | 1.3.6.1.4.1.45.5.3.1.11 | TruthValue | read-write | current |
| bseeMultiHostNonEapUserBasedPoliciesEnabled OBJECT-TYPE This object indicates whether non-EAPOL User-based policies are enabled or disabled. | 1.3.6.1.4.1.45.5.3.1.12 | TruthValue | read-write | current |
| bseeMultiHostNonEapUserBasedPoliciesFilterOnMac OBJECT-TYPE This object indicates whether the non-EAPOL User-based policy filters that are installed on ports will be dynamically modified to include the MAC address for which the filters are installed. | 1.3.6.1.4.1.45.5.3.1.13 | TruthValue | read-write | current |
| bseeMultihostNonEapRadiusPasswordAttributeFormat OBJECT-TYPE This object controls the format of the RADIUS password attribute that is included in requests to the RADIUS server for authenticating non-EAP clients (MAC addresses). If the ipAddr(0) bit is set, the password attribute will contain the switch's IP address encoded as a string of four 3-digit 0-padded integers. For example, the encoding for the IP address 47.80.225.1 would be '047080225001'. If the macAddr(1) bit is set, the password attribute will contain the MAC address to be authenticated as a string of six 2-digit hex numbers. For example, the MAC address 00:08:01:0a:33:34 would be encoded as '0008010a3334'. If the portNumber(2) bit is set, the password attribute will contain the port number on which the MAC address was seen, encoded as a string of two 2-digit 0-padded integers. The first integer is the unit/slot number, and the second number is the port number on that unit/slot. For a standalone stackable unit, the unit/slot number will be 0. For example, the encoding for unit/port 1/23 would be '0123', and the encoding for port 7 on a standalone stackable unit would be '0007'. If the key(3) bit is set, the password attribute will contain a custom configured string of up to 32 characters in length. If padding(4) bit is set, the password will contain dots even if fields in the password are blank. For instance, IP and Key will be represented as IP...Key. If the bit is not set, there will be dots only to separate fields. IP and Key will be IP.Key, while IP, Mac, Port or Key alone will be as they are, with no dots. The fields in the password attribute will appear in the order of the bits defined in this object, i.e., IP addr, followed by MAC addr, followed by port number, and finally by the key. Fields are separated by a '.' character. The separators are present regardless of whether a field is present if padding is used. So, for example, if all four fields are present, the password attribute might contain: 047080225001.0008010a3334.0123.ERS4000isGreat If none of the three fields are present, the password attribute will be '...' with padding used, or '' with no padding. | 1.3.6.1.4.1.45.5.3.1.14 | Bits {ipAddr(0), macAddr(1), portNumber(2), key(3), padding(4)} | read-write | current |
| bseeMultiHostAllowNonEapPhones OBJECT-TYPE This object indicates whether IP phones will be allowed access based on DHCP. | 1.3.6.1.4.1.45.5.3.1.15 | TruthValue | read-write | current |
| bseeMultiHostAllowRadiusAssignedVlan OBJECT-TYPE This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode. | 1.3.6.1.4.1.45.5.3.1.16 | TruthValue | read-write | current |
| bseeMultiHostEapPacketMode OBJECT-TYPE This object indicates whether to use unicast or multicast packets for Eap-ReqId packets. Normally, multicast packets are used. | 1.3.6.1.4.1.45.5.3.1.17 | INTEGER {multicast(1), unicast(2)} | read-write | current |
| bseeMultiHostEapRadiusTimeoutMode OBJECT-TYPE This object indicates whether or not to fail authentication of EAP users on a RADIUS timeout. | 1.3.6.1.4.1.45.5.3.1.18 | INTEGER {fail(1), doNotFail(2)} | read-write | current |
| bseeMultiHostAllowNonEapRadiusAssignedVlan OBJECT-TYPE This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode for non-EAP clients. | 1.3.6.1.4.1.45.5.3.1.19 | TruthValue | read-write | current |
| bseeMultiHostEapProtocolEnabled OBJECT-TYPE This object controls whether processing of EAP protocol packets is enabled. | 1.3.6.1.4.1.45.5.3.1.20 | TruthValue | read-write | current |
| bseeMultiHostUseMostRecentRadiusAssignedVlan OBJECT-TYPE Controls whether to use most recent RADIUS-assigned VLAN. | 1.3.6.1.4.1.45.5.3.1.21 | TruthValue | read-write | current |
| bseeMultiHostFailOpenVlanId OBJECT-TYPE This object specifies the ID of the global fail-over Vlan. | 1.3.6.1.4.1.45.5.3.1.22 | VlanId | read-write | current |
| bseeMultiHostFailOpenVlanEnabled OBJECT-TYPE This object specifies whether to use the fail-over Vlan. | 1.3.6.1.4.1.45.5.3.1.23 | TruthValue | read-write | current |
| bseeMultiHostMultiVlan OBJECT-TYPE This object specifies whether to use the multi-VLAN functionality with MHMA mode. | 1.3.6.1.4.1.45.5.3.1.24 | TruthValue | read-write | current |
| bseeMultiHostNeapReauthenticationEnabled OBJECT-TYPE This object specifies whether to use 'NEAP re-authentication' feature | 1.3.6.1.4.1.45.5.3.1.25 | TruthValue | read-write | current |
| bseeMultiHostBlockDifferentVlanAuth OBJECT-TYPE This object specifies whether to block authentication of clients which have an associated RADIUS assigned VLAN with an invalid value or different from first client authenticated on the same port | 1.3.6.1.4.1.45.5.3.1.26 | TruthValue | read-write | current |
| bseeMultiHostAdacDummyRadiusRequests OBJECT-TYPE This object specifies whether to send or not dummy RADIUS requests for NEAP users authenticated as ADAC NEAP | 1.3.6.1.4.1.45.5.3.1.27 | TruthValue | read-write | current |
| bseeAllowPortMirroringOnEap OBJECT-TYPE This object specifies whether EAP enabled ports can be involved in port mirroring | 1.3.6.1.4.1.45.5.3.1.28 | TruthValue | read-write | current |
| bseeMultiHostAdacNonEapEnabled OBJECT-TYPE This object specifies whether the authentication of Non-EAP phones using ADAC is allowed. | 1.3.6.1.4.1.45.5.3.1.29 | TruthValue | read-write | current |
| bseeMultiHostFailOpenVlanContinuityModeEnabled OBJECT-TYPE This object specifies whether to use the fail-over Vlan continuity mode. | 1.3.6.1.4.1.45.5.3.1.30 | TruthValue | read-write | current |
| bseeMultiHostNonEapRadiusPasswordFreeformKey OBJECT-TYPE This command specifies a custom string to be put in the password used to authenticate Non-EAP clients via RADIUS server. | 1.3.6.1.4.1.45.5.3.1.31 | OCTET STRING (SIZE(0..32)) | read-write | current |
| bseeMultiHostFailOpenVlanDisableEapMode OBJECT-TYPE This object specifies whether to use the Fail Open VLAN Disable EAP Mode. | 1.3.6.1.4.1.45.5.3.1.32 | TruthValue | read-write | current |
| bseePaeSystemOperState OBJECT-TYPE The oper state of EAP when ports are in Fail Open VLAN Disable EAP Mode. | 1.3.6.1.4.1.45.5.3.1.33 | INTEGER {enabled(1), disabled(2)} | read-only | current |
| bseeDefaultEapAll OBJECT-TYPE This object specifies whether to default all global EAP settings. | 1.3.6.1.4.1.45.5.3.1.34 | TruthValue | read-write | current |
| bseeNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.3.2 | |||
| bseeNotifications0 OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.3.2.0 | |||
| bseePortConfigTable OBJECT-TYPE This table is used to control the EAP multihost configuration for each port in the system. | 1.3.6.1.4.1.45.5.3.3 | not-accessible | current | |
| bseePortConfigEntry OBJECT-TYPE The EAP multihost configuration for a port. | 1.3.6.1.4.1.45.5.3.3.1 | not-accessible | current | |
| bseePortConfigPortNumber OBJECT-TYPE The Port number associated with this Port. | 1.3.6.1.4.1.45.5.3.3.1.1 | InterfaceIndex | not-accessible | current |
| bseePortConfigGuestVlanId OBJECT-TYPE This object specifies the ID of the guest VLAN for this port. Access to the guest VLAN is allowed for MAC addresses before EAP authentication has been performed. If the value of this object is 0, then the global guest VLAN ID is used for this port, as specified in bseeGuestVlanId. However, if the value of the associated instance of bseePortConfigGuestVlanEnabled is false(2), then access to the guest VLAN is not allowed for the port, regardless of the value of bseePortConfigGuestVlanId. | 1.3.6.1.4.1.45.5.3.3.1.2 | VlanIdOrNone | read-write | current |
| bseePortConfigMultiHostEnabled OBJECT-TYPE This object controls whether EAP multihost is enabled for a port. | 1.3.6.1.4.1.45.5.3.3.1.3 | TruthValue | read-write | current |
| bseePortConfigMultiHostEapMaxNumMacs OBJECT-TYPE This object specifies the maximum number of EAP-authentication MAC addresses allowed on this port. A value of 0 indicates that there is no port-specific limit. | 1.3.6.1.4.1.45.5.3.3.1.4 | Integer32 (0..100) | read-write | current |
| bseePortConfigMultiHostAllowNonEapClient OBJECT-TYPE This object controls whether non-EAP clients (MAC addresses) are allowed on the port. | 1.3.6.1.4.1.45.5.3.3.1.5 | TruthValue | read-write | current |
| bseePortConfigMultiHostNonEapMacSource OBJECT-TYPE This object controls the source for finding allowed non-EAP MAC addresses. | 1.3.6.1.4.1.45.5.3.3.1.6 | INTEGER {autoLearn(1), userConfig(2), radius(3)} | read-write | deprecated |
| bseePortConfigMultiHostNonEapMaxNumMacs OBJECT-TYPE This object specifies the maximum number of non-EAP authenticated MAC addresses allowed on this port. | 1.3.6.1.4.1.45.5.3.3.1.7 | Integer32 (1..100) | read-write | current |
| bseePortConfigGuestVlanEnabled OBJECT-TYPE This object controls whether access to the guest VLAN is allowed for a port. | 1.3.6.1.4.1.45.5.3.3.1.8 | TruthValue | read-write | current |
| bseePortConfigMultiHostRadiusAuthNonEapClient OBJECT-TYPE This object controls whether non-EAP clients (MAC addresses) may authenticated using RADIUS on the port. | 1.3.6.1.4.1.45.5.3.3.1.9 | TruthValue | read-write | current |
| bseePortConfigMultiHostSingleAuthEnabled OBJECT-TYPE This object controls whether non-EAP clients (MAC addresses) may be automatically authenticated on the port after an EAP client has been authenticated (known as MHSA). | 1.3.6.1.4.1.45.5.3.3.1.10 | TruthValue | read-write | current |
| bseePortConfigMultiHostAllowNonEapPhones OBJECT-TYPE This object indicates whether IP phones will be allowed access based on DHCP. | 1.3.6.1.4.1.45.5.3.3.1.11 | TruthValue | read-write | current |
| bseePortConfigMultiHostAllowRadiusAssignedVlan OBJECT-TYPE This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode. | 1.3.6.1.4.1.45.5.3.3.1.12 | TruthValue | read-write | current |
| bseePortConfigMultiHostEapPacketMode OBJECT-TYPE This object indicates whether to use unicast or multicast packets for Eap-ReqId packets. Normally, multicast packets are used. | 1.3.6.1.4.1.45.5.3.3.1.13 | INTEGER {multicast(1), unicast(2)} | read-write | current |
| bseePortConfigMultiHostEapRadiusTimeoutMode OBJECT-TYPE This object indicates whether or not to fail authentication of EAP users on a RADIUS timeout. | 1.3.6.1.4.1.45.5.3.3.1.14 | INTEGER {fail(1), doNotFail(2)} | read-write | current |
| bseePortConfigMultiHostAllowNonEapRadiusAssignedVlan OBJECT-TYPE This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode for non-EAP clients. | 1.3.6.1.4.1.45.5.3.3.1.15 | TruthValue | read-write | current |
| bseePortConfigProcessRadiusRequestsServerPackets OBJECT-TYPE This object indicates whether to process any RADIUS requests-server packets that are received on this port. | 1.3.6.1.4.1.45.5.3.3.1.16 | TruthValue | read-write | current |
| bseePortConfigEapProtocolEnabled OBJECT-TYPE This object controls whether EAP protocol packets are processed on this port. | 1.3.6.1.4.1.45.5.3.3.1.17 | TruthValue | read-write | current |
| bseePortConfigMultiHostUseMostRecentRadiusAssignedVlan OBJECT-TYPE Controls whether to use most recent RADIUS-assigned VLAN. | 1.3.6.1.4.1.45.5.3.3.1.18 | TruthValue | read-write | current |
| bseePortConfigMultiHostClearNeap OBJECT-TYPE Setting this object will clear NEAP authenticated clients from the authentication list. If the value is set to 00:00:00:00:00:00, all clients will be cleared from this port. Otherwise, only a specific client will be cleared. | 1.3.6.1.4.1.45.5.3.3.1.19 | MacAddress | read-write | current |
| bseePortConfigMultiHostBlockDifferentVlanAuth OBJECT-TYPE Controls whether to block authentication of clients which have an associated RADIUS assigned VLAN with an invalid value or different from first client authenticated on the same port. | 1.3.6.1.4.1.45.5.3.3.1.20 | TruthValue | read-write | current |
| bseePortConfigMultiHostAdacNonEapEnabled OBJECT-TYPE This object specifies whether the authentication of Non-EAP phones using ADAC is allowed on this port. | 1.3.6.1.4.1.45.5.3.3.1.21 | TruthValue | read-write | current |
| bseePortConfigDefaultEapAll OBJECT-TYPE This object specifies whether to default all EAP settings on this port. | 1.3.6.1.4.1.45.5.3.3.1.22 | TruthValue | read-write | current |
| bseePortConfigMultiHostMaxMacs OBJECT-TYPE This object specifies the maximum number of EAP and NEAP clients allowed on this port. | 1.3.6.1.4.1.45.5.3.3.1.23 | Integer32 (0..100) | read-write | current |
| bseeMultiHostStatusTable OBJECT-TYPE This table provides the EAP authentication status per-MAC address per-port. | 1.3.6.1.4.1.45.5.3.4 | not-accessible | current | |
| bseeMultiHostStatusEntry OBJECT-TYPE The status of EAP authentication of clients for a port. | 1.3.6.1.4.1.45.5.3.4.1 | not-accessible | current | |
| bseeMultiHostStatusPortNumber OBJECT-TYPE The Port number associated with this client. | 1.3.6.1.4.1.45.5.3.4.1.1 | InterfaceIndex | not-accessible | current |
| bseeMultiHostStatusClientMACAddr OBJECT-TYPE The MAC address of the client. | 1.3.6.1.4.1.45.5.3.4.1.2 | MacAddress | not-accessible | current |
| bseeMultiHostStatusPaeState OBJECT-TYPE The current value of the Authenticator PAE state machine. | 1.3.6.1.4.1.45.5.3.4.1.3 | INTEGER {initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9)} | read-only | current |
| bseeMultiHostStatusBackendAuthState OBJECT-TYPE The current state of the Backend Authentication state machine. | 1.3.6.1.4.1.45.5.3.4.1.4 | INTEGER {request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7)} | read-only | current |
| bseeMultiHostStatusReauthenticate OBJECT-TYPE Setting this object to reauthenticate(2) will force the client to be reauthenticated. When retrieved, the value of this object is always other(1). | 1.3.6.1.4.1.45.5.3.4.1.5 | INTEGER {other(1), reauthenticate(2)} | read-write | current |
| bseeMultiHostStatusVid OBJECT-TYPE The Vlan ID associated with this client for MultiVlan capabilities. If MultiVlan is not enabled for this client, the value of this object will be 4095. | 1.3.6.1.4.1.45.5.3.4.1.6 | VlanIdOrAny | read-only | current |
| bseeMultiHostStatusPri OBJECT-TYPE The Vlan priority value associated with this client for MultiVlan capabilities. If MultiVlan is not enabled for this client, the value of this object will be 8. | 1.3.6.1.4.1.45.5.3.4.1.7 | Integer32 (0..8) | read-only | current |
| bseeMultiHostSessionStatsTable OBJECT-TYPE A table that contains the session statistics objects for the Authenticator PAE associated with each EAP client on each Port. An entry appears in this table for each client MAC address on each port that may authenticate access to itself. | 1.3.6.1.4.1.45.5.3.5 | not-accessible | current | |
| bseeMultiHostSessionStatsEntry OBJECT-TYPE The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session for each client where there is no session currently active. This is similar to the dot1xAuthSessionStatsTable, except that it provides information per-port-per-MAC, rather than just per-port. | 1.3.6.1.4.1.45.5.3.5.1 | not-accessible | current | |
| bseeMultiHostSessionStatsPortNumber OBJECT-TYPE The Port number associated with this client. | 1.3.6.1.4.1.45.5.3.5.1.1 | InterfaceIndex | not-accessible | current |
| bseeMultiHostSessionStatsClientMACAddr OBJECT-TYPE The MAC address of this client. | 1.3.6.1.4.1.45.5.3.5.1.2 | MacAddress | not-accessible | current |
| bseeMultiHostSessionId OBJECT-TYPE A unique identifier for the session, in the form of a printable ASCII string of at least three characters. | 1.3.6.1.4.1.45.5.3.5.1.3 | SnmpAdminString | read-only | current |
| bseeMultiHostSessionAuthenticMethod OBJECT-TYPE The authentication method used to establish the session. | 1.3.6.1.4.1.45.5.3.5.1.4 | INTEGER {remoteAuthServer(1), localAuthServer(2)} | read-only | current |
| bseeMultiHostSessionTime OBJECT-TYPE The duration of the session in seconds. | 1.3.6.1.4.1.45.5.3.5.1.5 | TimeTicks | read-only | current |
| bseeMultiHostSessionTerminateCause OBJECT-TYPE The reason for the session termination. | 1.3.6.1.4.1.45.5.3.5.1.6 | INTEGER {supplicantLogoff(1), portFailure(2), supplicantRestart(3), reauthFailed(4), authControlForceUnauth(5), portReInit(6), portAdminDisabled(7), notTerminatedYet(999)} | read-only | current |
| bseeMultiHostSessionUserName OBJECT-TYPE The User-Name representing the identity of the Supplicant PAE. | 1.3.6.1.4.1.45.5.3.5.1.7 | SnmpAdminString | read-only | current |
| bseeMultiHostNonEapMacTable OBJECT-TYPE A table that contains the non-EAP MAC addresses that are allowed access to EAP-enabled interfaces. | 1.3.6.1.4.1.45.5.3.6 | not-accessible | current | |
| bseeMultiHostNonEapMacEntry OBJECT-TYPE An allowed non-EAP MAC address. | 1.3.6.1.4.1.45.5.3.6.1 | not-accessible | current | |
| bseeMultiHostNonEapMacPortNumber OBJECT-TYPE The Port number on which the MAC address is allowed. | 1.3.6.1.4.1.45.5.3.6.1.1 | InterfaceIndex | not-accessible | current |
| bseeMultiHostNonEapMacClientMACAddr OBJECT-TYPE The MAC address allowed on the port. | 1.3.6.1.4.1.45.5.3.6.1.2 | MacAddress | not-accessible | current |
| bseeMultiHostNonEapMacRowStatus OBJECT-TYPE This is used to control creation/deletion of entries in this table. | 1.3.6.1.4.1.45.5.3.6.1.3 | RowStatus | read-create | current |
| bseeMultiHostNonEapStatusTable OBJECT-TYPE This table provides the authentication status of non-EAP clients per-MAC address per-port. | 1.3.6.1.4.1.45.5.3.7 | not-accessible | current | |
| bseeMultiHostNonEapStatusEntry OBJECT-TYPE The status of authentication of a non-EAP client for a port. | 1.3.6.1.4.1.45.5.3.7.1 | not-accessible | current | |
| bseeMultiHostNonEapStatusPortNumber OBJECT-TYPE The Port number associated with this client. | 1.3.6.1.4.1.45.5.3.7.1.1 | InterfaceIndex | not-accessible | current |
| bseeMultiHostNonEapStatusClientMACAddr OBJECT-TYPE The MAC address of the client. | 1.3.6.1.4.1.45.5.3.7.1.2 | MacAddress | not-accessible | current |
| bseeMultiHostNonEapStatusState OBJECT-TYPE The authentication status. Values are: rejected(1) - the MAC address could not be authenticated on this port locallyAuthenticated(2) - the MAC address was authenticated using the local table of allowed clients radiusPending(3) - the MAC address is awaiting authentication by a RADIUS server radiusAuthenticated(4) - the MAC address was authenticated by a RADIUS server adacAuthenticated(5) - the MAC address was authenticated using ADAC configuration tables mhsaAuthenticated(6) - the MAC address was auto-authenticated on a port following a successful authentication of an EAP client | 1.3.6.1.4.1.45.5.3.7.1.3 | INTEGER {rejected(1), locallyAuthenticated(2), radiusPending(3), radiusAuthenticated(4), adacAuthenticated(5), mhsaAuthenticated(6)} | read-only | current |
| bseeMultiHostNonEapStatusReauthenticate OBJECT-TYPE Setting this object to reauthenticate(2) will force the MAC address to be reauthenticated. When retrieved, the value of this object is always other(1). | 1.3.6.1.4.1.45.5.3.7.1.4 | INTEGER {other(1), reauthenticate(2)} | read-write | current |
| bseeMultiHostNonEapStatusVid OBJECT-TYPE The Vlan ID associated with this client for MultiVlan capabilities. If MultiVlan is not enabled for this client, the value of this object will be 4095. | 1.3.6.1.4.1.45.5.3.7.1.5 | VlanIdOrAny | read-only | current |
| bseeMultiHostNonEapStatusPri OBJECT-TYPE The Vlan priority value associated with this client for MultiVlan capabilities. If MultiVlan is not enabled for this client, the value of this object will be 8. | 1.3.6.1.4.1.45.5.3.7.1.6 | Integer32 (0..8) | read-only | current |
| bseeSupplicantObjects OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.3.8 | |||
| bseeSupplicantEnabled OBJECT-TYPE Indicates whether supplicant functionality is enabled or disabled. A value of true(1) means enabled. | 1.3.6.1.4.1.45.5.3.8.1 | TruthValue | read-write | current |
| bseeSupplicantUserTable OBJECT-TYPE A table that contains the user name and password for the Supplicant PAE associated with each port. An entry appears in this table for each port that may authenticate itself when challenged by a remote system. | 1.3.6.1.4.1.45.5.3.9 | not-accessible | current | |
| bseeSupplicantUserEntry OBJECT-TYPE The configuration information for a Supplicant PAE. | 1.3.6.1.4.1.45.5.3.9.1 | not-accessible | current | |
| bseeSupplicantPortNumber OBJECT-TYPE A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization. | 1.3.6.1.4.1.45.5.3.9.1.1 | InterfaceIndex | not-accessible | current |
| bseeSupplicantUserName OBJECT-TYPE The user name currently in use by the Supplicant PAE state machine. | 1.3.6.1.4.1.45.5.3.9.1.2 | SnmpAdminString (SIZE(0..15)) | read-write | current |
| bseeSupplicantPassword OBJECT-TYPE The password currently in use by the Supplicant PAE state machine. | 1.3.6.1.4.1.45.5.3.9.1.3 | SnmpAdminString (SIZE(0..15)) | read-write | current |
| bseeSupplicantUserState OBJECT-TYPE Input the user state to logoff. | 1.3.6.1.4.1.45.5.3.9.1.4 | INTEGER {inactive(1), active(2), logoff(3)} | read-write | current |
| bseeMultiHostVoipVlanTable OBJECT-TYPE A table that contains EAP VoIP Vlan settings. | 1.3.6.1.4.1.45.5.3.10 | not-accessible | current | |
| bseeMultiHostVoipVlanEntry OBJECT-TYPE The configuration information for an EAP VoIP Vlan. | 1.3.6.1.4.1.45.5.3.10.1 | not-accessible | current | |
| bseeMultiHostVoipVlanIndex OBJECT-TYPE A unique identifier for each entry. | 1.3.6.1.4.1.45.5.3.10.1.1 | Integer32 (1..5) | not-accessible | current |
| bseeMultiHostVoipVlanId OBJECT-TYPE This object specifies the Vlan ID of the VoIP Vlan. | 1.3.6.1.4.1.45.5.3.10.1.2 | VlanId | read-write | current |
| bseeMultiHostVoipVlanEnabled OBJECT-TYPE This object specifies whether to use this VoIP Vlan. | 1.3.6.1.4.1.45.5.3.10.1.3 | TruthValue | read-write | current |
| bseeMultiHostDhcpAuthPhoneTable OBJECT-TYPE This table provides the list of DHCP authenticated IP phones per-MAC address per-port. | 1.3.6.1.4.1.45.5.3.11 | not-accessible | current | |
| bseeMultiHostDhcpAuthPhoneEntry OBJECT-TYPE The DHCP authenticated IP phone for a port. | 1.3.6.1.4.1.45.5.3.11.1 | not-accessible | current | |
| bseeMultiHostDhcpAuthPhonePortNumber OBJECT-TYPE The port number associated with the DHCP authenticated IP phone. | 1.3.6.1.4.1.45.5.3.11.1.1 | InterfaceIndex | not-accessible | current |
| bseeMultiHostDhcpAuthPhoneClientMACAddr OBJECT-TYPE The MAC address of the DHCP authenticated IP phone. | 1.3.6.1.4.1.45.5.3.11.1.2 | MacAddress | not-accessible | current |
| bseeMultiHostDhcpAuthPhoneUserName OBJECT-TYPE The user name currently in use by the DHCP authenticated IP phone. | 1.3.6.1.4.1.45.5.3.11.1.3 | SnmpAdminString (SIZE(0..32)) | read-only | current |