BASIS-SERIAL-MIB

Registered at: 1.3.6.1.4.1.351.110.4.1

1.3.6.1.4.1.351.150.69
Last updated: 2003-05-03 00:00
Organization: Cisco Systems, Inc.
Revisions: 2003-05-03 00:00
Namespace: cisco
Source file: BASIS-SERIAL-MIB
Digest: sha256:e4e33240f90575febcf5c5204f8da8f6d3ed63bb1e018b776650559951a328c6

Description

The MIB module to configure serial ports in Processor Module and different Service Modules(cards) in MGX8850,MGX8250 and MGX8220 ATM Edge switches.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com

Imports

From	Symbols
BASIS-MIB	`basisLines`
CISCOWAN-SMI	`ciscoWan`
SNMPv2-CONF	`MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP`
SNMPv2-SMI	`Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso`
SNMPv2-TC	`DisplayString, TEXTUAL-CONVENTION`

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BASIS-MIB
BASIS-SERIAL-MIB
CISCOWAN-SMI
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

Name	OID	Syntax	Access	Status
serialInterface OBJECT-IDENTITY	1.3.6.1.4.1.351.110.4.1
serialInterfaceTable OBJECT-TYPE This table represents Physical serial interfaces in the module.	1.3.6.1.4.1.351.110.4.1.1		not-accessible	current
serialInterfaceEntry OBJECT-TYPE An entry for each serial interface. Each entry contains information on port type, port speed.	1.3.6.1.4.1.351.110.4.1.1.1		not-accessible	current
serialPortNum OBJECT-TYPE This object identifies the serial port number. The value 1 is used for Console Port. The Console Port is also known as control port(CP). The value 2 is used for Maintenance Port and this can be used as SLIP (Serial Line Internet Protocol) interface. The Maintenance Port is also known as Modem Port(MP).	1.3.6.1.4.1.351.110.4.1.1.1.1	Integer32 (1..2)	read-only	current
serialPortType OBJECT-TYPE This object identifies the type of port. main(1) : This is applicable for Maintenance Port debug(2) : This is applicable for Console Port.	1.3.6.1.4.1.351.110.4.1.1.1.2	INTEGER {main(1), debug(2)}	read-only	current
serialPortEnable OBJECT-TYPE This object is used for enabling/disabling serial port.	1.3.6.1.4.1.351.110.4.1.1.1.3	INTEGER {disable(1), enable(2)}	read-write	current
serialPortbps OBJECT-TYPE This object identifies the baud rate of the ports.	1.3.6.1.4.1.351.110.4.1.1.1.4	INTEGER {bps9600(1), bps2400(2), bps19200(3)}	read-write	current
serialPortNumOfValidEntries OBJECT-TYPE This object contains number of serial ports. This identifies the number of entries in serialInterfacetable.	1.3.6.1.4.1.351.110.4.1.2	Integer32 (1..2)	read-only	current
basisSerialMIBConformance OBJECT-IDENTITY	1.3.6.1.4.1.351.150.69.2
basisSerialMIBGroups OBJECT-IDENTITY	1.3.6.1.4.1.351.150.69.2.1
basisSerialMIBCompliances OBJECT-IDENTITY	1.3.6.1.4.1.351.150.69.2.2

Conformance

Name	OID	Status
basisSerialConfGroup OBJECT-GROUP The collection of objects which are used to represent serial ports.	1.3.6.1.4.1.351.150.69.2.1.1	current
basisSerialCompliance MODULE-COMPLIANCE The compliance statement for objects related to Serial Ports.	1.3.6.1.4.1.351.150.69.2.2.1	current