MIBs Depot

AUTH-MIB

Registered at
1.3.6.1.4.1.171.12.3
Last updated
2011-10-20 00:00
Organization
D-Link Corp.
Namespace
dlink
Source file
AUTH-MIB
Digest
sha256:7d95a23e166838d69056ef3f751a98be2157d8cf62e0acd23a2304141e57c138

Description

The Structure of Common Management Information for the security functions of the devices.

Contact

http://support.dlink.com

Imports

FromSymbols
DLINK-ID-REC-MIBdlink-common-mgmt
IEEE8021-PAE-MIBPaeControlledPortStatus, dot1xPaePortNumber
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

AUTH-MIB
DLINK-ID-REC-MIB
IANAifType-MIB
IEEE8021-PAE-MIB
IF-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
PortList
TEXTUAL-CONVENTION
Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
current
VlanId
TEXTUAL-CONVENTION
A 12-bit VLAN ID used in the VLAN Tag header.
current

Objects

NameOIDSyntaxAccessStatus
swAuthenCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.1
authProtocol
OBJECT-TYPE
The authentication method used to authenticate users.
1.3.6.1.4.1.171.12.3.1.1INTEGER {authProtocolNone(1), authProtocolLocal(2), authProtocolRadius(3), authProtocolRadiusEap(4), authProtocolRadiusChap(5), authProtocolTacacs(6)}read-writecurrent
swAuthMode
OBJECT-TYPE
This object indicates the authentication mode of the device.
1.3.6.1.4.1.171.12.3.1.2INTEGER {portBase(1), macBase(2)}read-writecurrent
swAuthorizationState
OBJECT-TYPE
This object indicates the authorization status.
1.3.6.1.4.1.171.12.3.1.3INTEGER {enabled(1), disabled(2)}read-writecurrent
swAuthFailOver
OBJECT-TYPE
This object indicates the fail over status.
1.3.6.1.4.1.171.12.3.1.4INTEGER {enabled(1), disabled(2)}read-writecurrent
swRadiusCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.2
swRadiusDeadTime
OBJECT-TYPE
Specifies the number of minutes when a RADIUS server that is not responding to authentication requests, is considered unavailable and will no longer accept further requests for RADIUS authentication.
1.3.6.1.4.1.171.12.3.2.1Unsigned32read-writecurrent
swRadiusTimeout
OBJECT-TYPE
Specifies the number of seconds the NAS will wait for a reply to a RADIUS request before retransmitting the request.
1.3.6.1.4.1.171.12.3.2.2Unsigned32read-writecurrent
swRadiusRetransmitAttempts
OBJECT-TYPE
Specifies the number of times the NAS transmits each RADIUS request to the server before giving up.
1.3.6.1.4.1.171.12.3.2.3Unsigned32read-writecurrent
swRadiusServerTable
OBJECT-TYPE
The RADIUS server table
1.3.6.1.4.1.171.12.3.2.4not-accessiblecurrent
swRadiusServerEntry
OBJECT-TYPE
The entries of the RADIUS server table
1.3.6.1.4.1.171.12.3.2.4.1not-accessiblecurrent
swRadiusServerIndex
OBJECT-TYPE
The index of the RADIUS server
1.3.6.1.4.1.171.12.3.2.4.1.1INTEGER {swRadiusServerIndex-first(1), swRadiusServerIndex-second(2), swRadiusServerIndex-third(3)}read-onlycurrent
swRadiusServerIpAddr
OBJECT-TYPE
The IP address of the RADIUS server
1.3.6.1.4.1.171.12.3.2.4.1.2IpAddressread-onlyobsolete
swRadiusServerKey
OBJECT-TYPE
The key of the RADIUS server
1.3.6.1.4.1.171.12.3.2.4.1.3OCTET STRING (SIZE(1..32))not-accessiblecurrent
swRadiusAuthPortNumber
OBJECT-TYPE
The UDP destination port number used for authentication requests to this server.
1.3.6.1.4.1.171.12.3.2.4.1.4Unsigned32read-onlycurrent
swRadiusAcctPortNumber
OBJECT-TYPE
The UDP destination port number used for accounting requests to this server
1.3.6.1.4.1.171.12.3.2.4.1.5Unsigned32read-onlycurrent
swRadiusServerStatus
OBJECT-TYPE
The status of the RADIUS server
1.3.6.1.4.1.171.12.3.2.4.1.6RowStatusread-onlycurrent
swRadiusServerTimeout
OBJECT-TYPE
Specifies the number of seconds the NAS will wait for a reply to a RADIUS request before retransmitting the request.
1.3.6.1.4.1.171.12.3.2.4.1.7Unsigned32read-onlycurrent
swRadiusServerRetransmit
OBJECT-TYPE
Specifies the number of times the NAS transmits RADIUS requests to the server before giving up.
1.3.6.1.4.1.171.12.3.2.4.1.8Unsigned32read-onlycurrent
swRadiusServerAddrType
OBJECT-TYPE
The type of RADIUS Server address as specified by object 'swRadiusServerAddr'.
1.3.6.1.4.1.171.12.3.2.4.1.9InetAddressTyperead-onlycurrent
swRadiusServerAddr
OBJECT-TYPE
The address of the RADIUS Server.
1.3.6.1.4.1.171.12.3.2.4.1.10InetAddressread-onlycurrent
swRadiusVrfName
OBJECT-TYPE
This object is used to add or remove the VRF for 802.1X RADIUS
1.3.6.1.4.1.171.12.3.2.5DisplayString (SIZE(0..12))read-writecurrent
swRadiusAuthInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.3
swRadiusAuthClientIdentifier
OBJECT-TYPE
NAS Identifier. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.1OCTET STRING (SIZE(0..40))read-onlyobsolete
swRadiusAuthClientInvalidServerAddresses
OBJECT-TYPE
Statistics infomation - The number of RADIUS Access-Response packets received from unknown addresses. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.2Counter32read-onlyobsolete
swRadiusAuthServerTable
OBJECT-TYPE
The authenticate table for the RADIUS server.
1.3.6.1.4.1.171.12.3.3.3not-accessiblecurrent
swRadiusAuthServerEntry
OBJECT-TYPE
A list of RADIUS authentication servers. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1not-accessibleobsolete
swRadiusAuthServerIndex
OBJECT-TYPE
The RADIUS Server Index. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.1Integer32read-onlyobsolete
swRadiusAuthServerAddress
OBJECT-TYPE
The RADIUS authentication server address. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.2IpAddressread-onlyobsolete
swRadiusAuthClientServerPortNumber
OBJECT-TYPE
The UDP socket port numbers. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.3Unsigned32read-onlyobsolete
swRadiusAuthClientRoundTripTime
OBJECT-TYPE
The round trip time counter from the RADIUS Authentication Client. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.4Counter32read-onlyobsolete
swRadiusAuthClientAccessRequests
OBJECT-TYPE
The number of access requests from a RADIUS Authentication Client. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.5Counter32read-onlyobsolete
swRadiusAuthClientAccessRetransmissions
OBJECT-TYPE
The number of retransmissions sent from the RADIUS Authentication Client. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.6Counter32read-onlyobsolete
swRadiusAuthClientAccessAccepts
OBJECT-TYPE
The number of authentication access attempts from the RADIUS Authentication Client. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.7Counter32read-onlyobsolete
swRadiusAuthClientAccessRejects
OBJECT-TYPE
The counter stating the Client Access Authentication rejections. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.8Counter32read-onlyobsolete
swRadiusAuthClientAccessChallenges
OBJECT-TYPE
The counter stating the number of Access challenges from RADIUS authentication attempts. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.9Counter32read-onlyobsolete
swRadiusAuthClientMalformedAccessResponses
OBJECT-TYPE
The counter for malformed access responses from RADIUS Authentication Clients. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.10Counter32read-onlyobsolete
swRadiusAuthClientBadAuthenticators
OBJECT-TYPE
The counter of bad authenticators from the RADIUS Authentication Client. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.11Counter32read-onlyobsolete
swRadiusAuthClientPendingRequests
OBJECT-TYPE
The counter of pending requests from the RADIUS Authentication Client. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.12Counter32read-onlyobsolete
swRadiusAuthClientTimeouts
OBJECT-TYPE
The counter of timeouts from a RADIUS Authentication Client. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.13Counter32read-onlyobsolete
swRadiusAuthClientUnknownTypes
OBJECT-TYPE
The counter for unknown types from a RADIUS Authentication Client. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.14Counter32read-onlyobsolete
swRadiusAuthClientPacketsDropped
OBJECT-TYPE
The counter of dropped packets from a RADIUS Authentication Client. It was made obsolete by RFC 2618 and RFC 2620.
1.3.6.1.4.1.171.12.3.3.3.1.15Counter32read-onlyobsolete
swRadiusAccountingCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.4
swRadiusAcctUpdateInterval
OBJECT-TYPE
Time interval after which this RADIUS record should be updated and sent to an accounting server.
1.3.6.1.4.1.171.12.3.4.1Unsigned32read-writecurrent
swRadiusAcctSuppressNullUserName
OBJECT-TYPE
Indicates whether or not accounting records will be generated for users with null names.
1.3.6.1.4.1.171.12.3.4.2TruthValueread-writecurrent
swRadiusAcctServiceTable
OBJECT-TYPE
RADIUS accounting Table
1.3.6.1.4.1.171.12.3.4.3not-accessiblecurrent
swRadiusAcctServiceEntry
OBJECT-TYPE
The list of accounting services.
1.3.6.1.4.1.171.12.3.4.3.1not-accessiblecurrent
swRadiusAcctServiceIndex
OBJECT-TYPE
The Accounting table index
1.3.6.1.4.1.171.12.3.4.3.1.1INTEGER {acctServiceIndex-network(1), acctServiceIndex-exec(2), acctServiceIndex-system(3)}read-onlycurrent
swRadiusAcctServiceMethod
OBJECT-TYPE
The accounting service method
1.3.6.1.4.1.171.12.3.4.3.1.2INTEGER {swRadiusAcctServiceMethodNone(1), swRadiusAcctServiceMethodRadius(2)}read-writecurrent
swRadiusAcctServiceMode
OBJECT-TYPE
The accounting service mode
1.3.6.1.4.1.171.12.3.4.3.1.3INTEGER {radiusAcctServiceModeNone(1), radiusAcctServiceModeStartStop(2), radiusAcctServiceModeStopOnly(3)}read-writecurrent
swRadiusAccountingInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.5
swMacAuthBaseStatsInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.6
swMacAuthStateTable
OBJECT-TYPE
A table that contains the status objects for the Authenticator PAE associated with each virtual port (MAC address). An entry appears in this table for each virtual port that may authenticate access to itself.
1.3.6.1.4.1.171.12.3.6.1not-accessibleobsolete
swMacAuthStateEntry
OBJECT-TYPE
The information for an Authenticator PAE.
1.3.6.1.4.1.171.12.3.6.1.1not-accessibleobsolete
swPaeMacAddr
OBJECT-TYPE
The address associated with this MAC address.
1.3.6.1.4.1.171.12.3.6.1.1.1MacAddressnot-accessibleobsolete
swPaePortNumber
OBJECT-TYPE
The PAE Port number associated with this Port.
1.3.6.1.4.1.171.12.3.6.1.1.2InterfaceIndexnot-accessibleobsolete
swAuthPaeState
OBJECT-TYPE
The current value of the Authenticator PAE state machine.
1.3.6.1.4.1.171.12.3.6.1.1.3INTEGER {initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9)}read-onlyobsolete
swAuthBackendAuthState
OBJECT-TYPE
The current state of the Backend Authentication state machine.
1.3.6.1.4.1.171.12.3.6.1.1.4INTEGER {request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7)}read-onlyobsolete
swAuthAuthControlledPortStatus
OBJECT-TYPE
The current value of the controlled Port status parameter for the Port.
1.3.6.1.4.1.171.12.3.6.1.1.5PaeControlledPortStatusread-onlyobsolete
swMacAuthStatsTable
OBJECT-TYPE
A table that contains the statistics objects for the Authenticator PAE associated with each MAC address. An entry appears in this table for each MAC address that may authenticate access to itself.
1.3.6.1.4.1.171.12.3.6.2not-accessiblecurrent
swMacAuthStatsEntry
OBJECT-TYPE
The statistics information for an Authenticator PAE.
1.3.6.1.4.1.171.12.3.6.2.1not-accessiblecurrent
swAuthEapolFramesRx
OBJECT-TYPE
The number of valid EAPOL frames of any type that have been received by this Authenticator.
1.3.6.1.4.1.171.12.3.6.2.1.1Counter32read-onlycurrent
swAuthEapolFramesTx
OBJECT-TYPE
The number of EAPOL frames of any type that have been transmitted by this Authenticator.
1.3.6.1.4.1.171.12.3.6.2.1.2Counter32read-onlycurrent
swAuthEapolStartFramesRx
OBJECT-TYPE
The number of EAPOL Start frames that have been received by this Authenticator.
1.3.6.1.4.1.171.12.3.6.2.1.3Counter32read-onlycurrent
swAuthEapolLogoffFramesRx
OBJECT-TYPE
The number of EAPOL logoff frames that have been received by this Authenticator.
1.3.6.1.4.1.171.12.3.6.2.1.4Counter32read-onlycurrent
swAuthEapolRespIdFramesRx
OBJECT-TYPE
The number of EAP Resp/Id frames that have been received by this Authenticator.
1.3.6.1.4.1.171.12.3.6.2.1.5Counter32read-onlycurrent
swAuthEapolRespFramesRx
OBJECT-TYPE
The number of valid EAP Response frames, other than Resp/Id frames, that have been received by this Authenticator.
1.3.6.1.4.1.171.12.3.6.2.1.6Counter32read-onlycurrent
swAuthEapolReqIdFramesTx
OBJECT-TYPE
The number of EAP Req/Id frames that have been transmitted by this Authenticator.
1.3.6.1.4.1.171.12.3.6.2.1.7Counter32read-onlycurrent
swAuthEapolReqFramesTx
OBJECT-TYPE
The number of EAP Request frames, other than Rq/Id frames, that have been transmitted by this Authenticator.
1.3.6.1.4.1.171.12.3.6.2.1.8Counter32read-onlycurrent
swAuthInvalidEapolFramesRx
OBJECT-TYPE
The number of EAPOL frames that have been received by this Authenticator for which the frame type is not recognized.
1.3.6.1.4.1.171.12.3.6.2.1.9Counter32read-onlycurrent
swAuthEapLengthErrorFramesRx
OBJECT-TYPE
The number of EAPOL frames that have been received by this Authenticator for which the Packet Body Length field is invalid.
1.3.6.1.4.1.171.12.3.6.2.1.10Counter32read-onlycurrent
swAuthLastEapolFrameVersion
OBJECT-TYPE
The protocol version number carried in the most recently received EAPOL frame.
1.3.6.1.4.1.171.12.3.6.2.1.11Unsigned32read-onlycurrent
swAuthLastEapolFrameSource
OBJECT-TYPE
The source MAC address carried in the most recently received EAPOL frame.
1.3.6.1.4.1.171.12.3.6.2.1.12MacAddressread-onlycurrent
swMacAuthDiagTable
OBJECT-TYPE
A table that contains the diagnostics objects for the Authenticator PAE associated with each MAC address. An entry appears in this table for each MAC address that may authenticate access to itself.
1.3.6.1.4.1.171.12.3.6.3not-accessiblecurrent
swMacAuthDiagEntry
OBJECT-TYPE
The diagnostics information for an Authenticator PAE.
1.3.6.1.4.1.171.12.3.6.3.1not-accessiblecurrent
swAuthEntersConnecting
OBJECT-TYPE
Counts the number of times that the state machine transitions to a CONNECTING state from any other state.
1.3.6.1.4.1.171.12.3.6.3.1.1Counter32read-onlycurrent
swAuthEapLogoffsWhileConnecting
OBJECT-TYPE
Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message.
1.3.6.1.4.1.171.12.3.6.3.1.2Counter32read-onlycurrent
swAuthEntersAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.
1.3.6.1.4.1.171.12.3.6.3.1.3Counter32read-onlycurrent
swAuthAuthSuccessWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine, indicating successful authentication of the Supplicant (authSuccess = TRUE).
1.3.6.1.4.1.171.12.3.6.3.1.4Counter32read-onlycurrent
swAuthAuthTimeoutsWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE).
1.3.6.1.4.1.171.12.3.6.3.1.5Counter32read-onlycurrent
swAuthAuthFailWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).
1.3.6.1.4.1.171.12.3.6.3.1.6Counter32read-onlycurrent
swAuthAuthReauthsWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).
1.3.6.1.4.1.171.12.3.6.3.1.7Counter32read-onlycurrent
swAuthAuthEapStartsWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.
1.3.6.1.4.1.171.12.3.6.3.1.8Counter32read-onlycurrent
swAuthAuthEapLogoffWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant.
1.3.6.1.4.1.171.12.3.6.3.1.9Counter32read-onlycurrent
swAuthAuthReauthsWhileAuthenticated
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).
1.3.6.1.4.1.171.12.3.6.3.1.10Counter32read-onlycurrent
swAuthAuthEapStartsWhileAuthenticated
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message received from the Supplicant.
1.3.6.1.4.1.171.12.3.6.3.1.11Counter32read-onlycurrent
swAuthAuthEapLogoffWhileAuthenticated
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message received from the Supplicant.
1.3.6.1.4.1.171.12.3.6.3.1.12Counter32read-onlycurrent
swAuthBackendResponses
OBJECT-TYPE
Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server.
1.3.6.1.4.1.171.12.3.6.3.1.13Counter32read-onlycurrent
swAuthBackendAccessChallenges
OBJECT-TYPE
Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator.
1.3.6.1.4.1.171.12.3.6.3.1.14Counter32read-onlycurrent
swAuthBackendOtherRequestsToSupplicant
OBJECT-TYPE
Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.
1.3.6.1.4.1.171.12.3.6.3.1.15Counter32read-onlycurrent
swAuthBackendNonNakResponsesFromSupplicant
OBJECT-TYPE
Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticator's chosen EAP-method.
1.3.6.1.4.1.171.12.3.6.3.1.16Counter32read-onlycurrent
swAuthBackendAuthSuccesses
OBJECT-TYPE
Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., a Success becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server.
1.3.6.1.4.1.171.12.3.6.3.1.17Counter32read-onlycurrent
swAuthBackendAuthFails
OBJECT-TYPE
Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., a Fail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server.
1.3.6.1.4.1.171.12.3.6.3.1.18Counter32read-onlycurrent
swMacAuthSessionStatsTable
OBJECT-TYPE
A table that contains the session statistics objects for the Authenticator PAE associated with each MAC address. An entry appears in this table for each MAC address that may authenticate access to itself.
1.3.6.1.4.1.171.12.3.6.4not-accessiblecurrent
swMacAuthSessionStatsEntry
OBJECT-TYPE
The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each MAC address where there is no session currently active.
1.3.6.1.4.1.171.12.3.6.4.1not-accessiblecurrent
swAuthSessionOctetsRx
OBJECT-TYPE
The number of octets received in user data frames from this MAC address during the session.
1.3.6.1.4.1.171.12.3.6.4.1.1Counter64read-onlycurrent
swAuthSessionOctetsTx
OBJECT-TYPE
The number of octets transmitted in user data frames to this MAC address during the session.
1.3.6.1.4.1.171.12.3.6.4.1.2Counter64read-onlycurrent
swAuthSessionFramesRx
OBJECT-TYPE
The number of user data frames received from this MAC address during the session.
1.3.6.1.4.1.171.12.3.6.4.1.3Counter32read-onlycurrent
swAuthSessionFramesTx
OBJECT-TYPE
The number of user data frames transmitted to this MAC address during the session.
1.3.6.1.4.1.171.12.3.6.4.1.4Counter32read-onlycurrent
swAuthSessionId
OBJECT-TYPE
A unique identifier for the session, in the form of a printable ASCII string of at least three characters.
1.3.6.1.4.1.171.12.3.6.4.1.5SnmpAdminStringread-onlycurrent
swAuthSessionAuthenticMethod
OBJECT-TYPE
The authentication method used to establish the session.
1.3.6.1.4.1.171.12.3.6.4.1.6INTEGER {remoteAuthServer(1), localAuthServer(2)}read-onlycurrent
swAuthSessionTime
OBJECT-TYPE
The duration of the session in units of hundredth of a second.
1.3.6.1.4.1.171.12.3.6.4.1.7TimeTicksread-onlycurrent
swAuthSessionTerminateCause
OBJECT-TYPE
The reason for the session termination.
1.3.6.1.4.1.171.12.3.6.4.1.8INTEGER {supplicantLogoff(1), portFailure(2), supplicantRestart(3), reauthFailed(4), authControlForceUnauth(5), portReInit(6), portAdminDisabled(7), notTerminatedYet(999)}read-onlycurrent
swAuthSessionUserName
OBJECT-TYPE
The User-Name representing the identity of the Supplicant PAE.
1.3.6.1.4.1.171.12.3.6.4.1.9SnmpAdminStringread-onlycurrent
swDot1xAuthStateTable
OBJECT-TYPE
A table that contains the status objects for the Authenticator PAE associated with each host. An entry appears in this table for each host that may authenticate access to itself.
1.3.6.1.4.1.171.12.3.6.5not-accessiblecurrent
swDot1xAuthStateEntry
OBJECT-TYPE
The information for an Authenticator PAE.
1.3.6.1.4.1.171.12.3.6.5.1not-accessiblecurrent
swDot1xAuthPortNumber
OBJECT-TYPE
The Port number associated with this host.
1.3.6.1.4.1.171.12.3.6.5.1.1InterfaceIndexnot-accessiblecurrent
swDot1xAuthVID
OBJECT-TYPE
The Original VID associated with this host.
1.3.6.1.4.1.171.12.3.6.5.1.2INTEGERnot-accessiblecurrent
swDot1xAuthMACAddress
OBJECT-TYPE
The MAC address associated with this host.
1.3.6.1.4.1.171.12.3.6.5.1.3MacAddressnot-accessiblecurrent
swDot1xAuthenticatorPAEState
OBJECT-TYPE
The current value of the Authenticator PAE state machine.
1.3.6.1.4.1.171.12.3.6.5.1.4INTEGER {initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9)}read-onlycurrent
swDot1xAuthBackendAuthState
OBJECT-TYPE
The current state of the Backend Authentication state machine.
1.3.6.1.4.1.171.12.3.6.5.1.5INTEGER {request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7)}read-onlycurrent
swDot1xAuthAuthControlledStatus
OBJECT-TYPE
The authenticate state of the host.
1.3.6.1.4.1.171.12.3.6.5.1.6INTEGER {authenticating(1), authorized(2), unauthorized(3)}read-onlycurrent
swDot1xAuthAssignVID
OBJECT-TYPE
The VID assigned by the RADIUS server.
1.3.6.1.4.1.171.12.3.6.5.1.7INTEGERread-onlycurrent
swDot1xAuthAssignPriority
OBJECT-TYPE
The priority assigned by the RADIUS server.
1.3.6.1.4.1.171.12.3.6.5.1.8INTEGERread-onlycurrent
swDot1xAuthStatsTable
OBJECT-TYPE
A table that contains the statistics objects for the Authenticator PAE associated with each host. An entry appears in this table for each host that may authenticate access to itself.
1.3.6.1.4.1.171.12.3.6.6not-accessiblecurrent
swDot1xAuthStatsEntry
OBJECT-TYPE
The statistics information for an Authenticator PAE.
1.3.6.1.4.1.171.12.3.6.6.1not-accessiblecurrent
swDot1xAuthEapolFramesRx
OBJECT-TYPE
The number of valid EAPOL frames of any type that have been received by this Authenticator.
1.3.6.1.4.1.171.12.3.6.6.1.1Counter32read-onlycurrent
swDot1xAuthEapolFramesTx
OBJECT-TYPE
The number of EAPOL frames of any type that have been transmitted by this Authenticator.
1.3.6.1.4.1.171.12.3.6.6.1.2Counter32read-onlycurrent
swDot1xAuthEapolStartFramesRx
OBJECT-TYPE
The number of EAPOL Start frames that have been received by this Authenticator.
1.3.6.1.4.1.171.12.3.6.6.1.3Counter32read-onlycurrent
swDot1xAuthEapolLogoffFramesRx
OBJECT-TYPE
The number of EAPOL Logoff frames that have been received by this Authenticator.
1.3.6.1.4.1.171.12.3.6.6.1.4Counter32read-onlycurrent
swDot1xAuthEapolRespIdFramesRx
OBJECT-TYPE
The number of EAP Resp/Id frames that have been received by this Authenticator.
1.3.6.1.4.1.171.12.3.6.6.1.5Counter32read-onlycurrent
swDot1xAuthEapolRespFramesRx
OBJECT-TYPE
The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.
1.3.6.1.4.1.171.12.3.6.6.1.6Counter32read-onlycurrent
swDot1xAuthEapolReqIdFramesTx
OBJECT-TYPE
The number of EAP Req/Id frames that have been transmitted by this Authenticator.
1.3.6.1.4.1.171.12.3.6.6.1.7Counter32read-onlycurrent
swDot1xAuthEapolReqFramesTx
OBJECT-TYPE
The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.
1.3.6.1.4.1.171.12.3.6.6.1.8Counter32read-onlycurrent
swDot1xAuthInvalidEapolFramesRx
OBJECT-TYPE
The number of EAPOL frames that have been received by this Authenticator for which the frame type is not recognized.
1.3.6.1.4.1.171.12.3.6.6.1.9Counter32read-onlycurrent
swDot1xAuthEapLengthErrorFramesRx
OBJECT-TYPE
The number of EAPOL frames that have been received by this Authenticator for which the Packet Body Length field is invalid.
1.3.6.1.4.1.171.12.3.6.6.1.10Counter32read-onlycurrent
swDot1xAuthLastEapolFrameVersion
OBJECT-TYPE
The protocol version number carried in the most recently received EAPOL frame.
1.3.6.1.4.1.171.12.3.6.6.1.11Unsigned32read-onlycurrent
swDot1xAuthLastEapolFrameSource
OBJECT-TYPE
The source MAC address carried in the most recently received EAPOL frame.
1.3.6.1.4.1.171.12.3.6.6.1.12MacAddressread-onlycurrent
swDot1xAuthDiagTable
OBJECT-TYPE
A table that contains the diagnostics objects for the Authenticator PAE associated with each host. An entry appears in this table for each MAC address that may authenticate access to itself.
1.3.6.1.4.1.171.12.3.6.7not-accessiblecurrent
swDot1xAuthDiagEntry
OBJECT-TYPE
The diagnostics information for an Authenticator PAE.
1.3.6.1.4.1.171.12.3.6.7.1not-accessiblecurrent
swDot1xAuthEntersConnecting
OBJECT-TYPE
Counts the number of times that the state machine transitions to a CONNECTING state from any other state.
1.3.6.1.4.1.171.12.3.6.7.1.1Counter32read-onlycurrent
swDot1xAuthEapLogoffsWhileConnecting
OBJECT-TYPE
Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message.
1.3.6.1.4.1.171.12.3.6.7.1.2Counter32read-onlycurrent
swDot1xAuthEntersAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.
1.3.6.1.4.1.171.12.3.6.7.1.3Counter32read-onlycurrent
swDot1xAuthAuthSuccessWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine, indicating successful authentication of the Supplicant (authSuccess = TRUE).
1.3.6.1.4.1.171.12.3.6.7.1.4Counter32read-onlycurrent
swDot1xAuthAuthTimeoutsWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating an authentication timeout (authTimeout = TRUE).
1.3.6.1.4.1.171.12.3.6.7.1.5Counter32read-onlycurrent
swDot1xAuthAuthFailWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating an authentication failure (authFail = TRUE).
1.3.6.1.4.1.171.12.3.6.7.1.6Counter32read-onlycurrent
swDot1xAuthAuthReauthsWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).
1.3.6.1.4.1.171.12.3.6.7.1.7Counter32read-onlycurrent
swDot1xAuthAuthEapStartsWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.
1.3.6.1.4.1.171.12.3.6.7.1.8Counter32read-onlycurrent
swDot1xAuthAuthEapLogoffWhileAuthenticating
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant.
1.3.6.1.4.1.171.12.3.6.7.1.9Counter32read-onlycurrent
swDot1xAuthAuthReauthsWhileAuthenticated
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).
1.3.6.1.4.1.171.12.3.6.7.1.10Counter32read-onlycurrent
swDot1xAuthAuthEapStartsWhileAuthenticated
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.
1.3.6.1.4.1.171.12.3.6.7.1.11Counter32read-onlycurrent
swDot1xAuthAuthEapLogoffWhileAuthenticated
OBJECT-TYPE
Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant.
1.3.6.1.4.1.171.12.3.6.7.1.12Counter32read-onlycurrent
swDot1xAuthBackendResponses
OBJECT-TYPE
Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server.
1.3.6.1.4.1.171.12.3.6.7.1.13Counter32read-onlycurrent
swDot1xAuthBackendAccessChallenges
OBJECT-TYPE
Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator.
1.3.6.1.4.1.171.12.3.6.7.1.14Counter32read-onlycurrent
swDot1xAuthBackendOtherRequestsToSupplicant
OBJECT-TYPE
Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.
1.3.6.1.4.1.171.12.3.6.7.1.15Counter32read-onlycurrent
swDot1xAuthBackendNonNakResponsesFromSupplicant
OBJECT-TYPE
Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticator's chosen EAP-method.
1.3.6.1.4.1.171.12.3.6.7.1.16Counter32read-onlycurrent
swDot1xAuthBackendAuthSuccesses
OBJECT-TYPE
Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., a Success becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server.
1.3.6.1.4.1.171.12.3.6.7.1.17Counter32read-onlycurrent
swDot1xAuthBackendAuthFails
OBJECT-TYPE
Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., a Fail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server.
1.3.6.1.4.1.171.12.3.6.7.1.18Counter32read-onlycurrent
swDot1xAuthSessionStatsTable
OBJECT-TYPE
A table that contains the session statistics objects for the Authenticator PAE associated with each host. An entry appears in this table for each host that may authenticate access to itself.
1.3.6.1.4.1.171.12.3.6.8not-accessiblecurrent
swDot1xAuthSessionStatsEntry
OBJECT-TYPE
The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each host where there is no session currently active.
1.3.6.1.4.1.171.12.3.6.8.1not-accessiblecurrent
swDot1xAuthSessionOctetsRx
OBJECT-TYPE
The number of octets received in user data frames from this host during the session.
1.3.6.1.4.1.171.12.3.6.8.1.1Counter64read-onlycurrent
swDot1xAuthSessionOctetsTx
OBJECT-TYPE
The number of octets transmitted in user data frames to this host during the session.
1.3.6.1.4.1.171.12.3.6.8.1.2Counter64read-onlycurrent
swDot1xAuthSessionFramesRx
OBJECT-TYPE
The number of user data frames received from this host during the session.
1.3.6.1.4.1.171.12.3.6.8.1.3Counter32read-onlycurrent
swDot1xAuthSessionFramesTx
OBJECT-TYPE
The number of user data frames transmitted to this host during the session.
1.3.6.1.4.1.171.12.3.6.8.1.4Counter32read-onlycurrent
swDot1xAuthSessionId
OBJECT-TYPE
A unique identifier for the session, in the form of a printable ASCII string of at least three characters.
1.3.6.1.4.1.171.12.3.6.8.1.5SnmpAdminStringread-onlycurrent
swDot1xAuthSessionAuthenticMethod
OBJECT-TYPE
The authentication method used to establish the session.
1.3.6.1.4.1.171.12.3.6.8.1.6INTEGER {remoteAuthServer(1), localAuthServer(2)}read-onlycurrent
swDot1xAuthSessionTime
OBJECT-TYPE
The duration of the session in units of hundredth of a second.
1.3.6.1.4.1.171.12.3.6.8.1.7TimeTicksread-onlycurrent
swDot1xAuthSessionTerminateCause
OBJECT-TYPE
The reason for the session termination.
1.3.6.1.4.1.171.12.3.6.8.1.8INTEGER {supplicantLogoff(1), portFailure(2), supplicantRestart(3), reauthFailed(4), authControlForceUnauth(5), portReInit(6), portAdminDisabled(7), notTerminatedYet(999)}read-onlycurrent
swDot1xAuthSessionUserName
OBJECT-TYPE
The User-Name representing the identity of the Supplicant PAE.
1.3.6.1.4.1.171.12.3.6.8.1.9SnmpAdminStringread-onlycurrent
swRadiusCommand
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.7
swRadiusForceDownPortNumber
OBJECT-TYPE
The port number on which the RADIUS server is forced to terminate the network service.
1.3.6.1.4.1.171.12.3.7.1Unsigned32read-writecurrent
swRadiusForceDownMacAddr
OBJECT-TYPE
The user's MAC address on which the RADIUS server is forced to terminate the network service.
1.3.6.1.4.1.171.12.3.7.2MacAddressread-writecurrent
swAuthenticatedPortInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.8
swAuthenticatedPortCtrlTable
OBJECT-TYPE
A table used to configure the port's 802.1x capability.
1.3.6.1.4.1.171.12.3.8.1not-accessiblecurrent
swAuthenticatedPortCtrlEntry
OBJECT-TYPE
The Port number and authenticator control for a Port.
1.3.6.1.4.1.171.12.3.8.1.1not-accessiblecurrent
swAuthenticatedPortNumber
OBJECT-TYPE
The Authenticated Port number associated with this Port.
1.3.6.1.4.1.171.12.3.8.1.1.1INTEGERnot-accessiblecurrent
swAuthenticatedPortCapabilities
OBJECT-TYPE
Indicates the PAE functionality that this Port supports and that it may be managed through this MIB.
1.3.6.1.4.1.171.12.3.8.1.1.2INTEGER {none(1), authenticator(2)}read-writecurrent
swMacBasedPaePortInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.9
swMacBasedPaePortTable
OBJECT-TYPE
A table of system level information for each port supported by the MAC-based Port Access Entity. An entry appears in this table for each port of this system.
1.3.6.1.4.1.171.12.3.9.1not-accessiblecurrent
swMacBasedPaePortEntry
OBJECT-TYPE
The port number, protocol version and initialization control for a Port by MAC based mode.
1.3.6.1.4.1.171.12.3.9.1.1not-accessiblecurrent
swMacBasedPaePortNumber
OBJECT-TYPE
The port number associated with this Port.
1.3.6.1.4.1.171.12.3.9.1.1.1InterfaceIndexnot-accessiblecurrent
swMacBasedPaeMacAddress
OBJECT-TYPE
Specifies the MAC address used to initialize the 802.1X authentication state machine of some or all ports or used to reauthenticate the device connected to the port.
1.3.6.1.4.1.171.12.3.9.1.1.2MacAddressread-writecurrent
swMacBasedPaePortInitializeOrReauthStatus
OBJECT-TYPE
This is used to execute MAC-Based Port initialization or reauthentication, so it is necessary to set swMacBasedPaeMacAddress before this action can be initialized. Choosing 'initialize' causes the port to be initialized in MAC-based mode. Choosing 'reauthenticate' causes the port to be reauthenticated in MAC-based mode. The attribute value reverts to 'other' once the initialization or reauthentication has been done.
1.3.6.1.4.1.171.12.3.9.1.1.3INTEGER {other(1), initialize(2), reauthenticate(3)}read-writecurrent
swMacBasedPaeTable
OBJECT-TYPE
A table used to reauthenticate or initialize a host.
1.3.6.1.4.1.171.12.3.9.2not-accessiblecurrent
swMacBasedPaeEntry
OBJECT-TYPE
The port number, MAC address and initialization or reauthentication control for a host by MAC based mode.
1.3.6.1.4.1.171.12.3.9.2.1not-accessiblecurrent
swMacBasedPaePort
OBJECT-TYPE
The port number associated with this Port.
1.3.6.1.4.1.171.12.3.9.2.1.1InterfaceIndexnot-accessiblecurrent
swMacBasedPaeMac
OBJECT-TYPE
Specifies the MAC address used to initialize the 802.1X authentication state machine of the host or used to reauthenticate the host on the port.
1.3.6.1.4.1.171.12.3.9.2.1.2MacAddressnot-accessiblecurrent
swMacBasedPaeInitOrReauthStatus
OBJECT-TYPE
This is used to execute MAC-based Port initialization or reauthentication. Choosing 'initialize' causes the host to be initialized in MAC-based mode. Choosing 'reauthenticate' causes the host to be reauthenticated in MAC-based mode. The attribute value reverts to 'other' once the initialization or reauthentication has been done.
1.3.6.1.4.1.171.12.3.9.2.1.3INTEGER {other(1), initialize(2), reauthenticate(3)}read-writecurrent
swPaeAuthenticator
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.10
swPaeAuthSysFwdPdu
OBJECT-TYPE
This object indicates the global setting to control the forwarding of the EAPOL PDU.
1.3.6.1.4.1.171.12.3.10.1INTEGER {enabled(1), disabled(2)}read-writecurrent
swPaeAuthSysMaxUser
OBJECT-TYPE
This object indicates the global limitation on the maximum number of users that can be learned via 802.1X authentication. The maximum entry range is (0..N), the value N means the maximum number. It is determined by the project itself. Value 0 means no-limit.
1.3.6.1.4.1.171.12.3.10.2INTEGERread-writecurrent
swPaeAuthConfigTable
OBJECT-TYPE
A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself.
1.3.6.1.4.1.171.12.3.10.3not-accessiblecurrent
swPaeAuthConfigEntry
OBJECT-TYPE
The configuration information for an Authenticator PAE.
1.3.6.1.4.1.171.12.3.10.3.1not-accessiblecurrent
swPaeAuthFwdPdu
OBJECT-TYPE
This object indicates the per port setting to control the forwarding of EAPOL PDU.
1.3.6.1.4.1.171.12.3.10.3.1.1INTEGER {enabled(1), disabled(2)}read-writecurrent
swPaeAuthMaxUser
OBJECT-TYPE
This object indicates the limitation on the maximum number of users by port. The max entry range is (0..N), the value N means the max number. It is determined by project itself. Value 0 means no-limit.
1.3.6.1.4.1.171.12.3.10.3.1.2INTEGERread-writecurrent
swAuthStateTable
OBJECT-TYPE
A table that contains the status objects for the Authenticator PAE associated with each host. An entry appears in this table for each host that may authenticate access to itself.
1.3.6.1.4.1.171.12.3.10.4not-accessiblecurrent
swAuthStateEntry
OBJECT-TYPE
The information for an Authenticator PAE.
1.3.6.1.4.1.171.12.3.10.4.1not-accessiblecurrent
swAuthPortNumber
OBJECT-TYPE
The PAE Port number associated with this Port.
1.3.6.1.4.1.171.12.3.10.4.1.1InterfaceIndexnot-accessiblecurrent
swAuthMacAddress
OBJECT-TYPE
The address associated with this MAC address.
1.3.6.1.4.1.171.12.3.10.4.1.2MacAddressnot-accessiblecurrent
swAuthAuthControlledStatus
OBJECT-TYPE
The authenticate state of the host.
1.3.6.1.4.1.171.12.3.10.4.1.3INTEGER {authenticating(1), authorized(2), unauthorized(3)}read-onlycurrent
swAuthAssignVid
OBJECT-TYPE
The VID assigned by the RADIUS server.
1.3.6.1.4.1.171.12.3.10.4.1.4INTEGERread-onlycurrent
swAuthAssignPriority
OBJECT-TYPE
The priority assigned by the RADIUS server.
1.3.6.1.4.1.171.12.3.10.4.1.5INTEGERread-onlycurrent
swAuthenticatorPAEState
OBJECT-TYPE
The current value of the Authenticator PAE state machine.
1.3.6.1.4.1.171.12.3.10.4.1.6INTEGER {initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9)}read-onlycurrent
swAuthBKdAuthState
OBJECT-TYPE
The current state of the Backend Authentication state machine.
1.3.6.1.4.1.171.12.3.10.4.1.7INTEGER {request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7)}read-onlycurrent
swCompoundAuthMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.3.11
swCompoundAuthPortTable
OBJECT-TYPE
A table that contains compound authentication information for each port.
1.3.6.1.4.1.171.12.3.11.1not-accessiblecurrent
swCompoundAuthPortEntry
OBJECT-TYPE
The compound authentication configuration information for a port.
1.3.6.1.4.1.171.12.3.11.1.1not-accessiblecurrent
swCompoundAuthPortIndex
OBJECT-TYPE
The compound authentication port number associated with this port.
1.3.6.1.4.1.171.12.3.11.1.1.1INTEGER (1..65535)read-onlycurrent
swCompoundAuthPortAuthMode
OBJECT-TYPE
This object sets the authorization mode. Port-based: If one of the attached hosts passes the authentication, all the hosts on the same port will be granted access to the network. If the user fails the authorization, this port will keep trying the next authentication. Host-based: Every user can be authenticated individually. The client can start authentication on specific authentication VLAN(s).
1.3.6.1.4.1.171.12.3.11.1.1.2INTEGER {hostbased(1), portbased(2)}read-writecurrent
swCompoundAuthPortMethod
OBJECT-TYPE
This object sets the method for compound authentication settings. None: The system level setting of individual authentication still takes effect. Thus suppose that the compound authentication method of a port is set to any but MAC-AC is disabled, JWAC and 802.1x enabled, then the user must pass either the JWAC or 802.1x method. The following is the relation of the compound authentication method and the configuration of the individual authentication method. (1) If compound authentication methods is not set to none: The port's authentication method will depend on the compound authentication method. An individual authentication method's setting is ignored. (2) If compound authentication methods is set to none: This port is in single-auth mode. The port's authentication method will depend on the individual authentication method's setting. Any: If any one of the authentication methods (802.1x, MAC-AC, WAC and JWAC) passes, then pass. dot1xImpb: Dot1x will be verified first, and then IMPB will be verified. Both authentication methods need to be passed to make the authentication successful. impbJwac: IMPB will be verified first, and then JWAC will be verified. Both authentication methods need to be passed to make the authentication successful. impbWac: IMPB will be verified first, and then WAC will be verified. Both authentication methods need to be passed to make the authentication successful. macImpb: MAC-AC will be verified first, and then IMPB will be verified. Both authentication methods need to be passed to make the authentication successful. macJwac: MAC-AC will be verified first. If client passed MAC authentication, JWAC will be verified. Both authentication methods need to be passed to make the authentication successful.
1.3.6.1.4.1.171.12.3.11.1.1.3INTEGER {none(1), any(2), dot1xImpb(3), impbJwac(4), impbWac(5), macImpb(6), macJwac(7)}read-writecurrent
swCompoundAuthPortAuthVLANs
OBJECT-TYPE
This object sets the Authentication VLAN(s). If the authentication VLAN is not specified, It means to not care which VLAN the client comes from, the client will be authenticated if the client's MAC (not care the VLAN) is not authenticated. After the client is authenticated, the client will not be reauthenticated when received from other VLANs. When the port's authorization mode is changed to port based, previously authentication VLAN(s) on this port will be cleared. Note: For the compound VLAN specification, the value should be separated by ',' or '-'. Such as: 1,4,7 or 1,4,7-9 .
1.3.6.1.4.1.171.12.3.11.1.1.4DisplayStringread-writecurrent
swGuestVlanTable
OBJECT-TYPE
A table containing configuration information for guest VLANs configured into the device by local or network management. All entries are permanent and will be restored after the device reset.
1.3.6.1.4.1.171.12.3.11.2not-accessiblecurrent
swGuestVlanEntry
OBJECT-TYPE
Information for a guest VLAN configured into the device by local or network management.
1.3.6.1.4.1.171.12.3.11.2.1not-accessiblecurrent
swGuestVlanId
OBJECT-TYPE
The VLAN ID referring to this guest VLAN.
1.3.6.1.4.1.171.12.3.11.2.1.1VlanIdread-onlycurrent
swGuestVlanPorts
OBJECT-TYPE
The set of ports which are permanently assigned to the guest VLAN member for this guest VLAN by management. Note: For on-going projects which need to support old-style commands as well, the rules for guest VLAN setting are: (1) Compound authentication mode is not none: You need to specify the guest VLAN by this command or individual authentication method's guest VLAN setting will be ignored. (2) Compound authentication mode is none: This port is in single authentication mode. Individual authentications use their guest VLAN settings configured by their individual guest VLAN commands. The setting of config guest_vlan will be ignored
1.3.6.1.4.1.171.12.3.11.2.1.2PortListread-writecurrent
swGuestVlanRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.12.3.11.2.1.3RowStatusread-createcurrent
swAuthorizationAttributes
OBJECT-TYPE
This object indicates the authorization status. When the authorization for attributes is enabled, whether the authorized attributes (for example VLAN, 802.1p default priority, and ACL) assigned by the RADIUS server or local database will be accepted or not will depend on the individual module setting.
1.3.6.1.4.1.171.12.3.11.3INTEGER {enabled(1), disabled(2)}read-writecurrent
swAuthServerFailoverState
OBJECT-TYPE
This object indicates the authentication server failover state. block: Block the client. local: Use the local DB to authenticate the client. permit: The client is always regarded as authenticated.
1.3.6.1.4.1.171.12.3.11.4INTEGER {block(1), local(2), permit(3)}read-writecurrent
swAuthMACFormatCase
OBJECT-TYPE
This object indicates the case format of the authentication MAC address for RADIUS authentication. uppercase: Using uppercase format, the formatted is: AA-BB-CC-DD-EE-FF. lowercase: Using lowercase format, the formatted is: aa-bb-cc-dd-ee-ff.
1.3.6.1.4.1.171.12.3.11.5INTEGER {uppercase(1), lowercase(2)}read-writecurrent
swAuthMACFormatDelimiter
OBJECT-TYPE
This object indicates the delimiter format of authentication MAC address for RADIUS authentication. none: Not using any delimiter, the format is: AABBCCDDEEFF hyphen: Using '-' as delimiter, the format is: AA-BB-CC-DD-EE-FF colon: Using ':' as delimiter, the format is: AA:BB:CC:DD:EE:FF dot: Using '.' as delimiter, the format is: AA.BB.CC.DD.EE.FF
1.3.6.1.4.1.171.12.3.11.6INTEGER {none(1), hyphen(2), colon(3), dot(4)}read-writecurrent
swAuthMACFormatDelimiterNumber
OBJECT-TYPE
This object indicates the delimiter number of authentication MAC address for RADIUS authentication. delimiter-number-1: single delimiter, the format is: AABBCC.DDEEFF delimiter-number-2: double delimiter, the format is: AABB.CCDD.EEFF delimiter-number-5: multiple delimiter, the format is: AA.BB.CC.DD.EE.FF Note: while swAuthMACFormatDelimiter is none(1), the delimiter number will not take effect.
1.3.6.1.4.1.171.12.3.11.7INTEGER {delimiter-number-1(1), delimiter-number-2(2), delimiter-number-5(3)}read-writecurrent