MIBs Depot

ATTO6500N-MIB

Registered at
1.3.6.1.4.1.4547.2.3
Last updated
2013-04-19 00:00
Organization
ATTO Technology, Inc.
Revisions
2013-04-19 00:00, 2013-04-16 00:00
Namespace
atto
Source file
ATTO6500N-MIB
Digest
sha256:2da7de5c43ec3282e3b15135a8293ac4f90f0cc074d9d179eb8a2d26b7e40658

Description

ATTO 6500N Custom MIB

Contact

ATTO

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION, TimeInterval

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATTO6500N-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
DisplayWWN
TEXTUAL-CONVENTION
A Fibre Channel/SAS World Wide Name.
current
PHYStatus
TEXTUAL-CONVENTION
Operational state of a SAS phy
current
QSFPTech
TEXTUAL-CONVENTION
Defines the various QSFP Technologies.
current

Objects

NameOIDSyntaxAccessStatus
attotech
OBJECT-IDENTITY
1.3.6.1.4.1.4547
attoProducts
OBJECT-IDENTITY
1.3.6.1.4.1.4547.1
attoMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.4547.2
bridgeTraps
OBJECT-IDENTITY
1.3.6.1.4.1.4547.2.3.0
bridgeIdentity
OBJECT-IDENTITY
1.3.6.1.4.1.4547.2.3.1
bridgeUniqueId
OBJECT-TYPE
8-octets uniquely identifying this HW element.
1.3.6.1.4.1.4547.2.3.1.1DisplayWWNread-onlycurrent
vendorID
OBJECT-TYPE
Vendor ID for this HW element.
1.3.6.1.4.1.4547.2.3.1.2DisplayString (SIZE(0..32))read-onlycurrent
modelName
OBJECT-TYPE
Product/Model name of this HW element.
1.3.6.1.4.1.4547.2.3.1.3DisplayString (SIZE(0..32))read-onlycurrent
primaryFirmwareRevision
OBJECT-TYPE
Build Number, Version Number and Base Version for the firmware on the primary partition (active firmware image).
1.3.6.1.4.1.4547.2.3.1.4DisplayString (SIZE(0..20))read-onlycurrent
primaryFirmwareBuildDate
OBJECT-TYPE
Active firmware image build date and time (no time zone offset).
1.3.6.1.4.1.4547.2.3.1.5DateAndTime (SIZE(8))read-onlycurrent
hardwareVersion
OBJECT-TYPE
Current version of 6500N hardware.
1.3.6.1.4.1.4547.2.3.1.6Integer32read-onlycurrent
secondaryFirmwareRevision
OBJECT-TYPE
Version Number and Build Number for the firmware on the secondary partition (backup firmware image).
1.3.6.1.4.1.4547.2.3.1.7DisplayString (SIZE(0..12))read-onlycurrent
secondaryFirmwareBuildDate
OBJECT-TYPE
Backup Firmware image build date and time (no time zone offset).
1.3.6.1.4.1.4547.2.3.1.8DateAndTime (SIZE(8))read-onlycurrent
serialNumber
OBJECT-TYPE
Serial Number of this HW element.
1.3.6.1.4.1.4547.2.3.1.9DisplayString (SIZE(0..32))read-onlycurrent
bridgeName
OBJECT-TYPE
User defined symbolic name assigned to this HW element.
1.3.6.1.4.1.4547.2.3.1.10DisplayString (SIZE(0..32))read-onlycurrent
bridgeChassis
OBJECT-IDENTITY
1.3.6.1.4.1.4547.2.3.2
lastReboot
OBJECT-TYPE
Date and time of last reboot.
1.3.6.1.4.1.4547.2.3.2.1DateAndTime (SIZE(8))read-onlycurrent
uptime
OBJECT-TYPE
Time since last reboot, in units of 0.01 seconds
1.3.6.1.4.1.4547.2.3.2.2TimeIntervalread-onlycurrent
lastRebootReason
OBJECT-TYPE
Plain text reason for last reboot.
1.3.6.1.4.1.4547.2.3.2.3DisplayString (SIZE(0..100))read-onlycurrent
minimumOperatingTemp
OBJECT-TYPE
Minimum Safe Operating Temperature, in degrees C
1.3.6.1.4.1.4547.2.3.2.4Integer32read-onlycurrent
maximumOperatingTemp
OBJECT-TYPE
Maximum Safe Operating Temperature, in degrees C
1.3.6.1.4.1.4547.2.3.2.5Integer32read-onlycurrent
temperatureHighAlertSetting
OBJECT-TYPE
High temperature warning threshold, in degrees C
1.3.6.1.4.1.4547.2.3.2.6Integer32read-onlycurrent
temperatureLowAlertSetting
OBJECT-TYPE
Low temperature warning threshold, in degrees C
1.3.6.1.4.1.4547.2.3.2.7Integer32read-onlycurrent
chassisTemperature
OBJECT-TYPE
Current Chassis Temperature, in degrees C
1.3.6.1.4.1.4547.2.3.2.8Integer32read-onlycurrent
chassisTemperatureStatus
OBJECT-TYPE
The current sensor status (normal, warning or critical). Normal indicates the temperature for this HW element is within the safe range. Warning indicates that the temperature for this HW element has passed the warning threshold but is still within the safe range. Critical indicates that the temperature for this HW element is not within the safe operating temperature range.
1.3.6.1.4.1.4547.2.3.2.9INTEGER {normal(1), warning(2), critical(3)}read-onlycurrent
dramSingleBitErrorCount
OBJECT-TYPE
Number of Single-bit ECC errors since last reboot
1.3.6.1.4.1.4547.2.3.2.10Integer32read-onlycurrent
chassisThroughputStatus
OBJECT-TYPE
Overall bridge throughput status (normal, warning). Normal indicates that there is no data bottleneck. Warning indicates that the aggregate fibre channel throughput has exceeded 50,000 IOPS.
1.3.6.1.4.1.4547.2.3.2.11INTEGER {normal(1), warning(2)}read-onlycurrent
fcSFPInfoTable
OBJECT-TYPE
Stores configuration information relating to installed FibreChannel SFPs.
1.3.6.1.4.1.4547.2.3.2.12not-accessiblecurrent
fcSFPInfoEntry
OBJECT-TYPE
Stores information about installed fibre channel SFPs.
1.3.6.1.4.1.4547.2.3.2.12.1not-accessiblecurrent
fcSFPIndex
OBJECT-TYPE
Used to index the SFP in the SFP Info table.
1.3.6.1.4.1.4547.2.3.2.12.1.1Integer32 (1..2)not-accessiblecurrent
fcSFPVendor
OBJECT-TYPE
SFP vendor name
1.3.6.1.4.1.4547.2.3.2.12.1.2DisplayString (SIZE(0..16))read-onlycurrent
fcSFPSerialNum
OBJECT-TYPE
SFP serial number
1.3.6.1.4.1.4547.2.3.2.12.1.3DisplayString (SIZE(0..16))read-onlycurrent
fcSFPPartNum
OBJECT-TYPE
SFP vendor-supplied part number
1.3.6.1.4.1.4547.2.3.2.12.1.4DisplayString (SIZE(0..16))read-onlycurrent
fcSFPDataRateCapability
OBJECT-TYPE
Maximum data rate capability of the fibre channel SFP.
1.3.6.1.4.1.4547.2.3.2.12.1.5INTEGER {gb2(2), gb4(4), gb8(8), gb16(16)}read-onlycurrent
sasQSFPInfoTable
OBJECT-TYPE
Stores configuration information relating to installed SAS QSFPs.
1.3.6.1.4.1.4547.2.3.2.13not-accessiblecurrent
sasQSFPInfoEntry
OBJECT-TYPE
Stores information about installed SAS QSFPs.
1.3.6.1.4.1.4547.2.3.2.13.1not-accessiblecurrent
sasQSFPIndex
OBJECT-TYPE
Used to index the QSFP in the QSFP Info table.
1.3.6.1.4.1.4547.2.3.2.13.1.1Integer32 (1..2)not-accessiblecurrent
sasQSFPVendor
OBJECT-TYPE
QSFP vendor name
1.3.6.1.4.1.4547.2.3.2.13.1.2DisplayString (SIZE(0..16))read-onlycurrent
sasQSFPSerialNum
OBJECT-TYPE
QSFP serial number
1.3.6.1.4.1.4547.2.3.2.13.1.3DisplayString (SIZE(0..16))read-onlycurrent
sasQSFPType
OBJECT-TYPE
QSFP type
1.3.6.1.4.1.4547.2.3.2.13.1.4QSFPTechread-onlycurrent
sasQSFPPartNum
OBJECT-TYPE
QSFP vendor-supplied part number
1.3.6.1.4.1.4547.2.3.2.13.1.5DisplayString (SIZE(0..16))read-onlycurrent
bridgePorts
OBJECT-IDENTITY
1.3.6.1.4.1.4547.2.3.3
fcPortInfoTable
OBJECT-TYPE
Stores fibre channel specific information for each fibre channel port.
1.3.6.1.4.1.4547.2.3.3.1not-accessiblecurrent
fcPortInfoEntry
OBJECT-TYPE
Stores state and capability information about the fibre channel ports.
1.3.6.1.4.1.4547.2.3.3.1.1not-accessiblecurrent
fcPortIndex
OBJECT-TYPE
Used to index the fibre channel port in the FC Port Entry table.
1.3.6.1.4.1.4547.2.3.3.1.1.1Integer32 (1..2)not-accessiblecurrent
fcPortPortNumber
OBJECT-TYPE
The fibre channel port number.
1.3.6.1.4.1.4547.2.3.3.1.1.2Integer32 (1..2)read-onlycurrent
fcPortOperationalState
OBJECT-TYPE
Operational state of the fibre channel port.
1.3.6.1.4.1.4547.2.3.3.1.1.3INTEGER {unknown(-1), online(1), offline(2)}read-onlycurrent
fcPortAdminState
OBJECT-TYPE
Administrative state of the fibre channel port. Indicates whether the port is enabled or disabled.
1.3.6.1.4.1.4547.2.3.3.1.1.4INTEGER {unknown(-1), disabled(1), enabled(2)}read-onlycurrent
fcPortDataRateNegotiated
OBJECT-TYPE
Current negotiated data rate of fibre channel port.
1.3.6.1.4.1.4547.2.3.3.1.1.5INTEGER {unknown(-1), gb2(2), gb4(4), gb8(8)}read-onlycurrent
fcPortConnModeNegotiated
OBJECT-TYPE
Current negotiated mode of the fibre channel port.
1.3.6.1.4.1.4547.2.3.3.1.1.6INTEGER {unknown(-1), loop(1), ptp(2)}read-onlycurrent
fcPortDataRateConfigured
OBJECT-TYPE
Configured data rate of fibre channel port.
1.3.6.1.4.1.4547.2.3.3.1.1.7INTEGER {auto(-1), gb2(2), gb4(4), gb8(8)}read-onlycurrent
fcPortConnModeConfigured
OBJECT-TYPE
Configured mode of the fibre channel port.
1.3.6.1.4.1.4547.2.3.3.1.1.8INTEGER {loop(1), ptp(2), looppreferred(3), ptppreferred(4)}read-onlycurrent
fcPortDataRateCapability
OBJECT-TYPE
Maximum data rate capability of the fibre channel port.
1.3.6.1.4.1.4547.2.3.3.1.1.9INTEGER {gb2(2), gb4(4), gb8(8)}read-onlycurrent
fcPortNodeName
OBJECT-TYPE
Fibre channel node name.
1.3.6.1.4.1.4547.2.3.3.1.1.10DisplayWWNread-onlycurrent
fcPortPortName
OBJECT-TYPE
Fibre channel port name.
1.3.6.1.4.1.4547.2.3.3.1.1.11DisplayWWNread-onlycurrent
fcPortPeerName
OBJECT-TYPE
The port name of the fabric-attached fibre channel peer. Only valid for a switched fabric. Direct-connected fibre channel ports will respond with all zeros.
1.3.6.1.4.1.4547.2.3.3.1.1.12DisplayWWNread-onlycurrent
fcPortStatisticsTable
OBJECT-TYPE
Stores fibre channel specific I/O and error statistics for each fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2not-accessiblecurrent
fcPortStatisticsEntry
OBJECT-TYPE
Stores statistics about fibre channel ports.
1.3.6.1.4.1.4547.2.3.3.2.1not-accessiblecurrent
fcStatsIndex
OBJECT-TYPE
Used to index the fibre channel port in the Fibre Channel Port Statistics table.
1.3.6.1.4.1.4547.2.3.3.2.1.1Integer32 (1..2)not-accessiblecurrent
fcStatsTxWords
OBJECT-TYPE
Number of words transmitted on this fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2.1.2Unsigned32read-writecurrent
fcStatsRxWords
OBJECT-TYPE
Number of words received on this fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2.1.3Unsigned32read-writecurrent
fcStatsTimeSinceReset
OBJECT-TYPE
Amount of time since the fibre channel port statistics were reset.
1.3.6.1.4.1.4547.2.3.3.2.1.4TimeIntervalread-onlycurrent
fcStatsErrLinkFailure
OBJECT-TYPE
Number of link failure events on this fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2.1.5Unsigned32read-writecurrent
fcStatsErrLossOfSync
OBJECT-TYPE
Number of loss of sync events on this fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2.1.6Unsigned32read-writecurrent
fcStatsErrInvalidCRC
OBJECT-TYPE
Number of frames with invalid CRCs on this fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2.1.7Unsigned32read-writecurrent
fcStatsErrInvalidTxWords
OBJECT-TYPE
Number of invalid TX word events on this fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2.1.8Unsigned32read-writecurrent
fcStatsErrLipCount
OBJECT-TYPE
Number of LIP events on this fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2.1.9Unsigned32read-writecurrent
fcStatsErrNOSCount
OBJECT-TYPE
Number of NOS events on this fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2.1.10Unsigned32read-writecurrent
fcStatsErrSignalLoss
OBJECT-TYPE
Number of loss of signal events on this fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2.1.11Unsigned32read-writecurrent
fcStatsErrPrimitive
OBJECT-TYPE
Number of primitive sequential protocol errors on this fibre channel port.
1.3.6.1.4.1.4547.2.3.3.2.1.12Unsigned32read-writecurrent
sasPortInfoTable
OBJECT-TYPE
Stores SAS specific information for each SAS port.
1.3.6.1.4.1.4547.2.3.3.3not-accessiblecurrent
sasPortInfoEntry
OBJECT-TYPE
Stores information about the SAS ports.
1.3.6.1.4.1.4547.2.3.3.3.1not-accessiblecurrent
sasPortIndex
OBJECT-TYPE
Used to index the SAS port in the SAS Port Entry table.
1.3.6.1.4.1.4547.2.3.3.3.1.1Integer32 (1..2)not-accessiblecurrent
sasPortPortNumber
OBJECT-TYPE
The SAS port number.
1.3.6.1.4.1.4547.2.3.3.3.1.2Integer32 (1..2)read-onlycurrent
sasPortOperationalState
OBJECT-TYPE
Operational state of this entire SAS port. Degraded state is entered when fewer than all four PHYs are online. Offline state is entered when all four PHYs are offline.
1.3.6.1.4.1.4547.2.3.3.3.1.3INTEGER {unknown(-1), online(1), offline(2), degraded(3)}read-onlycurrent
sasPortPhy1State
OBJECT-TYPE
Operational state of SAS PHY 1 of this SAS port.
1.3.6.1.4.1.4547.2.3.3.3.1.4PHYStatusread-onlycurrent
sasPortPhy2State
OBJECT-TYPE
Operational state of SAS PHY 2 of this SAS port.
1.3.6.1.4.1.4547.2.3.3.3.1.5PHYStatusread-onlycurrent
sasPortPhy3State
OBJECT-TYPE
Operational state of SAS PHY 3 of this SAS port.
1.3.6.1.4.1.4547.2.3.3.3.1.6PHYStatusread-onlycurrent
sasPortPhy4State
OBJECT-TYPE
Operational state of SAS PHY 4 of this SAS port.
1.3.6.1.4.1.4547.2.3.3.3.1.7PHYStatusread-onlycurrent
sasPortAdminState
OBJECT-TYPE
Administrative state of this SAS port. Indicates whether the port is enabled or disabled.
1.3.6.1.4.1.4547.2.3.3.3.1.8INTEGER {unknown(-1), disabled(1), enabled(2)}read-onlycurrent
sasPortDataRateCapability
OBJECT-TYPE
Maximum data rate capability of the SAS port.
1.3.6.1.4.1.4547.2.3.3.3.1.9INTEGER {gb1point5(1), gb3(3), gb6(6)}read-onlycurrent
sasPortDataRateNegotiated
OBJECT-TYPE
Current negotiated data rate of this SAS port.
1.3.6.1.4.1.4547.2.3.3.3.1.10INTEGER {gb1point5(1), gb3(3), gb6(6)}read-onlycurrent
sasPortAddress
OBJECT-TYPE
SAS Port Address.
1.3.6.1.4.1.4547.2.3.3.3.1.11DisplayWWNread-onlycurrent
sasPhyStatisticsTable
OBJECT-TYPE
Stores SAS specific I/O and error statistics for each SAS PHY.
1.3.6.1.4.1.4547.2.3.3.4not-accessiblecurrent
sasPhyStatisticsEntry
OBJECT-TYPE
Stores statistics about SAS Phys.
1.3.6.1.4.1.4547.2.3.3.4.1not-accessiblecurrent
sasPhyStatsIndex
OBJECT-TYPE
Used to index the SAS PHY in the SAS PHY Statistics table.
1.3.6.1.4.1.4547.2.3.3.4.1.1Integer32 (1..8)not-accessiblecurrent
sasPhyStatsTimeSinceReset
OBJECT-TYPE
Amount of time since the SAS PHY statistics were reset on this SAS PHY.
1.3.6.1.4.1.4547.2.3.3.4.1.2TimeIntervalread-onlycurrent
sasPhyStatsErrLinkChanged
OBJECT-TYPE
Number of link changed events on this SAS PHY.
1.3.6.1.4.1.4547.2.3.3.4.1.3Unsigned32read-writecurrent
sasPhyStatsErrInvalidCRC
OBJECT-TYPE
Number of Invalid CRC events on this SAS PHY.
1.3.6.1.4.1.4547.2.3.3.4.1.4Unsigned32read-writecurrent
sasPhyStatsErrPhyReset
OBJECT-TYPE
Number of Phy Reset events on this SAS PHY.
1.3.6.1.4.1.4547.2.3.3.4.1.5Unsigned32read-writecurrent
sasPhyStatsErrLossOfSync
OBJECT-TYPE
Number of loss of sync events on this SAS PHY.
1.3.6.1.4.1.4547.2.3.3.4.1.6Unsigned32read-writecurrent
sasPhyStatsErrDisparityCount
OBJECT-TYPE
Number of disparity error events on this SAS PHY.
1.3.6.1.4.1.4547.2.3.3.4.1.7Unsigned32read-writecurrent
sasPhyStatsErrInvalidDwords
OBJECT-TYPE
Number of invalid DWORD events on this SAS PHY.
1.3.6.1.4.1.4547.2.3.3.4.1.8Unsigned32read-writecurrent
bridgeConfig
OBJECT-IDENTITY
1.3.6.1.4.1.4547.2.3.4
trapsEnabled
OBJECT-TYPE
Indicates whether traps are enabled or disabled.
1.3.6.1.4.1.4547.2.3.4.1INTEGER {disabled(1), enabled(2)}read-onlycurrent
snmpUpdatesEnabled
OBJECT-TYPE
Indicates whether SNMP updates are enabled or disabled.
1.3.6.1.4.1.4547.2.3.4.2INTEGER {disabled(1), enabled(2)}read-onlycurrent
bridgeTrapInfo
OBJECT-IDENTITY
1.3.6.1.4.1.4547.2.3.5
trapMaxClients
OBJECT-TYPE
The maximum number of SNMP trap recipients supported by this HW element.
1.3.6.1.4.1.4547.2.3.5.1Integer32read-onlycurrent
trapClientTable
OBJECT-TYPE
Stores a row for each IP address/port number configured to receive traps.
1.3.6.1.4.1.4547.2.3.5.2not-accessiblecurrent
trapClientEntry
OBJECT-TYPE
Ip/Port pair for a specific client.
1.3.6.1.4.1.4547.2.3.5.2.1not-accessiblecurrent
trapClientIndex
OBJECT-TYPE
Used to index a trap client in the trapClientTable.
1.3.6.1.4.1.4547.2.3.5.2.1.1Integer32 (0..8)not-accessiblecurrent
trapClientIpAddress
OBJECT-TYPE
The IP address of a client registered for traps in dotted notation.
1.3.6.1.4.1.4547.2.3.5.2.1.2DisplayString (SIZE(0..48))read-onlycurrent
trapClientPort
OBJECT-TYPE
The UDP port to send traps for this trap client. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table.
1.3.6.1.4.1.4547.2.3.5.2.1.3Integer32 (1..2147483647)read-onlycurrent
trapClientFilter
OBJECT-TYPE
This value defines the trap severity filter for this trap host. The unit will send traps to this trap client that have a severity level less than or equal to this value. The default value of this object is 'warning'.
1.3.6.1.4.1.4547.2.3.5.2.1.4INTEGER {none(1), critical(2), warning(3), informational(4), all(5)}read-onlycurrent
bridgeMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.4547.2.3.6
bridgeMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.4547.2.3.6.1
bridgeMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.4547.2.3.6.2
attoModules
OBJECT-IDENTITY
1.3.6.1.4.1.4547.3
attoAgentCapability
OBJECT-IDENTITY
1.3.6.1.4.1.4547.4

Notifications

NameOIDStatus
bridgeTemperatureWarning
NOTIFICATION-TYPE
Supports notification of over/under temperature warnings. The following information is returned: tempStatus - the current temperature status (normal, warning, critical) Where normal indicates the temperature is within the safe range. Warning indicates the warning threshold has been reached. Critical indicates that the temperature is outside the safe range. temperature - current temperature of the sensor Recommended severity level (for filtering): warning
1.3.6.1.4.1.4547.2.3.0.1current
fcPortTransition
NOTIFICATION-TYPE
Supports notification of fibre channel port connectivity changes. The following information is returned: fcPortPortNumber - the description of the port fcPortOperationalState - the current port state Recommended severity level (for filtering): informational
1.3.6.1.4.1.4547.2.3.0.2current
sasPortTransition
NOTIFICATION-TYPE
Supports notification of SAS port connectivity changes. The following information is returned: sasPortPortNumber - the description of the port sasPortOperationalState - the current port state Recommended severity level (for filtering): informational
1.3.6.1.4.1.4547.2.3.0.3current
bridgeThroughputWarning
NOTIFICATION-TYPE
Supports notification of max-throughput warning indicating a potential data bottleneck. Data throughput is measured as aggregate completed I/O's per second on the Fibre Channel interfaces. The following information is returned: ChassisthroughputStatus - the current throughput status normal : no data bottleneck. warning: aggregate fibre channel throughput has exceeded 50,000 IOPS. Recommended severity level (for filtering): informational
1.3.6.1.4.1.4547.2.3.0.4current

Conformance

NameOIDStatus
bridgeBasicCompliance
MODULE-COMPLIANCE
The requirements for a bridge implementation.
1.3.6.1.4.1.4547.2.3.6.1.1current
bridgeIdentityBasicGroup
OBJECT-GROUP
The bridge identity information group.
1.3.6.1.4.1.4547.2.3.6.2.1current
bridgeChassisBasicGroup
OBJECT-GROUP
The bridge chassis information group.
1.3.6.1.4.1.4547.2.3.6.2.2current
bridgFcPortInfoBasicGroup
OBJECT-GROUP
The bridge ports information group.
1.3.6.1.4.1.4547.2.3.6.2.3current
bridgeFcPortStatisicsBasicGroup
OBJECT-GROUP
The bridge ports information group.
1.3.6.1.4.1.4547.2.3.6.2.4current
bridgeSasPortInfoBasicGroup
OBJECT-GROUP
The bridge ports information group.
1.3.6.1.4.1.4547.2.3.6.2.5current
bridgeSasPortStatisicsBasicGroup
OBJECT-GROUP
The bridge ports information group.
1.3.6.1.4.1.4547.2.3.6.2.6current
bridgeConfigBasicGroup
OBJECT-GROUP
The bridge configuration information group.
1.3.6.1.4.1.4547.2.3.6.2.7current
bridgeTrapInfoBasicGroup
OBJECT-GROUP
The bridge trap information group.
1.3.6.1.4.1.4547.2.3.6.2.8current
bridgeTrapsBasicGroup
NOTIFICATION-GROUP
The bridge traps group.
1.3.6.1.4.1.4547.2.3.6.2.9current